Making a laptop stand from plastic pipes with your own hands. How to make a laptop stand from plastic pipes Laptop stand from polypropylene pipes

Each of us has seen plastic at least once in our lives. water pipes, but no one has any idea how many useful things can be made from them. It is unlikely that they are suitable only for plumbing.
Notebook Stand.

Our stand will require five straight pieces polypropylene pipes, length depends on your laptop model, six corners, welding machine for polypropylene and 15 min. free time.Instead of welding machine you can use glue. True, then the time of receipt is at the exit finished product will increase slightly. The glue usually needs time to set, and the adhesive seam usually gains full strength within 24 hours.
And using sewer pipes it is possible to produce collapsible design, besides, sewer pipes are much cheaper, and their strength will be quite enough for our product. The only thing is to make sure that there are rubber gaskets in the corners. Without them, the connection will be shaky and fragile.
We measure your laptop, cut the pipes to fit, but not very precisely, a tolerance of 1-2 cm is acceptable.


So, what you got: one pipe corresponding to the horizontal, two verticals of the computer and two at a height convenient for you above the table. The welding machine is convenient and won’t cause any problems, it attaches to the table, is easy to use, you can easily find it or ask your friends. The only thing is not to rush, be as careful as possible so as not to spoil everything with the curvature of the seam, insert the pipes into the weld evenly, not at an angle of 45 degrees. The process itself: we put on the ends of the device the corner and the pipe that need to be connected, press it, wait for a while, connect it.
All this can be seen in the video:



When using glue, the technology is almost the same, only each connection must be fixed (the time depends on the type of glue) for setting. Therefore, we assemble it in parts: we glued all the parts in pairs and wait until the glue sets. Then we move on.

The end result should be a table like the one in the photo.
At the same time, at cost, your stand will cost 4 times cheaper than those that will be offered to you in the store. The hollow ends of the pipes can be sealed, puttied, put plugs, insert key chains, for example with a logo, at your discretion. Paint the entire product suitable color in the interior.

If you really want, you can go further and build a cooler into the stand for additional cooling of the laptop.
To do this, you will need a few more pieces of pipes and corners, as well as the cooler itself (which can be bought separately, or taken from an old computer power supply) and a piece of wire with a USB connector at the end (can be cut from an old mouse (of course a computer one, not caught in basement) or buy in a store). An additional tool you will need is a soldering iron with solder and electrical tape.




The further process is shown in such detail in the video that even the absence of a Russian translation will not cause difficulty in understanding.



And after all the manipulations it will turn out something like this:






And now, in conclusion, a few pictures, what else can be done from PVC pipes.
Children's chair made of 1" pipe


Camping folding chair made of 1" pipe


Country tables and chairs made of 1" pipe, for outdoor use


Children's 2-tier bed (pipes with a diameter of 3/4", 1" and 1 1/4") were used


A bed for dogs, the diameter of the pipe in this case is selected based on the size and weight of the dog.

Basket for garbage and dirty linen made of 1/2" or 3/4" pipe depending on the dimensions

Hanging swing for a summer house


From the remains of pipes large diameter, you can make a small organizer in the garage

Clothes dryer made of PVC pipes.


By attaching the wheels, we get very convenient carts.


will serve you long years, it does not need to be painted, and it will not rot or rust, as usually happens with greenhouses made of wood and metal.



From plastic pipes can be assembledOr make a pen for chickens


Shelving that can be easily assembled to any size


Collapsible outdoor tents and tents made of plastic pipes

A trellis for grapes made of plastic pipes that will always have a pleasant appearance.

Carports made of plastic pipes


Fences and enclosures made of plastic pipes


As you can see, plastic pipes can be used in any industry (and not just for their intended purpose), and where exactly to use them depends on your imagination.
Prepared based on materials from tecnicolinux.blogspot.ru, interesko.info, samodelka.net, lifefixing.ru, sense-life.com, aquisotemlugarprafelicidade.blogspot.ru, pvcplans.com, sdelay.tv, vse-sam.ru, ispyeverything.info
Compilation of text and links

Topic spotted by users And .

PVC pipes have long become something of a construction set. The pipes are used to assemble the most different designs, simple and complex. But before you think about assembling furniture or a gazebo, you should look at the simplest product, a laptop stand.

There are quite a few similar stands on the Internet; this example is one of the simplest. Dimensions are for a specific product, a 13-inch laptop. If necessary, the dimensions of the parts can be increased.

In total, you will need about a meter of pipes with a diameter of at least 20 mm. .
Six elbows for assembling corner joints.
Two end caps.
Saw or grinder for cutting.
Tape measure, pencil, spray paint.

Plugs and 90* elbows must match the diameter of the pipe. During installation, the parts are glued together for reliability and durability.

Therefore, even before final assembly It is necessary to accurately trim the workpieces to size and check the connection.

The overall dimensions of the product are 250/190 mm. . We need to prepare one longitudinal pipe 250 mm long. , two transverse 190 mm long. and two vertical ones of 85-90 mm. .
It doesn’t matter so much if you make a mistake by a few millimeters, the main thing is that the paired parts are the same length.

First, it is advisable to assemble the structure “dry”, without glue. Try how the stand fits your laptop. If necessary, adjust the length of the workpieces.
Then, starting with the longest part, disassemble it, apply PVC glue to the ends and reassemble it tightly, pushing the parts into place.
It is necessary to constantly monitor the position of the knees to ensure that the structure is symmetrical and stable. A more serious product.

White or gray pipes look too plain. There are special spray paints that are designed for application to plastic and PVC.
At the final stage of work, apply 2-3 layers of paint, with intermediate drying of each layer.

Pictures latesthandmade.com

Working on a laptop at a table due to the lack of legs is sometimes not very convenient. Stands in the form of books and various folders are unreliable, as they slip out from under the laptop with any awkward movement. We invite you to make a creative one with your own hands. homemade stand for a laptop, which will be appropriate both in the office and at home.

We will need:

• PVC pipes (diameter 2 cm);
• paint for plastic;
• pipe connectors (6 pcs);
• rubber hammer;
• self-adhesive silicone pads (4 pcs).

Now you know how to make a laptop stand in a few hours that will ensure comfortable work at your desk. Additionally, laptops are prone to overheating, which can damage the hard drive. Thanks to this stand, the device will not come into contact with the countertop, and air circulation will ensure cooling.

Interesting ideas

If you urgently need a stand, you can make it in a few minutes from an ordinary cardboard box. However, a cardboard laptop stand will not last long.

Much stronger than wooden stands, which are made according to a similar pattern. Their disadvantage is that wood is a heavy material, so carrying such a stand with you will be inconvenient. But a collapsible stand made of plastic components - perfect solution. In addition, the parts will easily fit into

IN modern world, with its developed industry, there remains room for creative solution any everyday task. Crafts made from plastic pipes have become a tool for realizing fantasies in decorative arts And engineering structures right down to carports, greenhouses, swings and much more.

What can be made from plastic pipes

Products made from plastic pipes, due to their lightness, flexibility, strength and ease of assembly, have become a real storehouse of ideas for the creativity of many modern “Kulibins” and “lefties”. Using pipes, you can make furniture, gardening accessories, interior elements, entertainment for children, and even weapons. And it’s not just about the low price and availability of materials. People's imagination is constantly being embodied in new forms. Below is a selection of 50 of the most interesting projects.

How to shape plastic pipes

Pipes can be given almost any shape, because they are connected to each other and bent. For example, if you need to make a vault for a canopy, they can easily bend to a given radius, it depends on the diameter and thickness of the walls.

Homemade products made from plastic pipes require giving the material certain shapes. This is achieved by heating the material. Used for heating construction hair dryer or a gas burner. It is necessary to heat the plastic surface and, while it is hot, give it the desired shape. If there is no burner, you can heat the material over the fire gas stove. For mild heating, simply fill the pipe with hot water.

The heated plastic is very soft, so Special attention you need to pay attention to creases in bending areas. Cut plastic with a hacksaw or jigsaw.

Connection options

You can connect pipes for homemade products in several ways:

1. Socket connections. To inner tube Dressed tightly and not loose, a rubber O-ring is installed inside it. You should also remove the chamfer from the flat end and lubricate its tip with silicone. This connection is not considered very strong, but it is easy to disassemble. With its help they make collapsible homemade designs, For example, garden furniture, removed from the yard for the winter.
2. The second type of connection is practically no different from the first, except that glue is used for connection. In order for the segments to adhere better, it is necessary to thoroughly degrease the parts to be joined before applying glue.
3. Fitting. can be detachable or non-detachable. Using couplings, you can fasten sections of pipes of different diameters and even materials. Most often, inexpensive plastic compression couplings are used for homemade products. For fastening in places where the structure bends, you can use another type of shaped elements - bends, tees and crosses.
4. Heating device (“palnik” or “iron”). Has little in common with famous ones household appliances. This is a special machine for welding plastic pipes. The products to be joined are placed in the clamp of such a heater and stick to each other in a few seconds. This is the fastest and most reliable method; all joints are neat and airtight. There is only one bad thing - this heater is quite expensive and buying it for one craft is unprofitable.
5. Use of flanges. One flange is placed on the ends to be connected, which is a sleeve, slightly larger diameter than the pipe itself, with a thick washer with holes located at one end. After the flange is secured to each section, they are connected using bolts passing through the holes in the washer. Wide rubber gaskets are used for waterproofing. Not the most popular type of connection for homemade products. Flanges make the appearance of crafts more rough and untidy. But if brutality is inherent in the design of a homemade product, such connections will perfectly reveal the master’s intention.

To enlarge images, click on the photo.

garden arch

Arches are used to decorate a yard or personal plot. Very often they are used as an element of decoration for festive events. The upper part of the arch is assembled from curved pipes. To make bending easier, you can heat them with a flame. gas burner, but best of all, fill it with boiling water and bend it slowly. Upper part crafts can be made using dismountable fittings. In this case, we get a folding arch, which is convenient to store and transport.

Privacy corner in kindergarten

According to the recommendations of the Federal State Educational Institution, the “Center for Privacy and Relaxation” is becoming a mandatory attribute for kindergartens and other preschool educational institutions. The frame of the privacy corner made of plastic pipes can be in the shape of a house, tent or mink. Inside you need to put pillows, soft objects, plasticine, pencils and paper, educational and distracting toys. The outside of the craft is covered with fabric of calm, non-flashy shades. It is preferable to use pastel colored materials. All this will allow the child to relax a little, wait out the stress, take his mind off troubles and soon return to the group with his friends.

Beach Search Scoob

A beach scuba is used to search for small objects in the sand - coins, watches, chains, shells, and so on. It resembles a scoop with small holes in the bottom. To make a scuba, you need a piece of plastic pipe with a diameter of at least 100 mm, in the lower part of which you need to drill holes for the sand to escape, and in the upper part you need to make a handle. The photo shows a homemade scuba for the manufacture of which a tap to a smaller diameter, a plug and a thin piece as a handle are successfully used.

Embroidery machine

Another one interesting craft from PVC pipes. Essentially, it is a frame on a stand designed to stretch fabric over it. It is made from pipes connected by 90 degree bends. This allows you to make a geometrically correct square or rectangle. The angle of inclination is adjusted using a loose socket connection of the tee in the frame and the outlet in the stand.

Large diameter pipe well

Plastic well - the simplest use or PVC. First, a hole is dug, reaching the groundwater level. Then PVC of the appropriate diameter and length is placed in it to prevent the soil from falling off. Can be placed in the well deep well pump and organize a water supply to the house directly from the reservoir.

Swings for children

A swing made of plastic pipes is unlikely to support an adult. But for children not exceeding 20 kg, this is a completely feasible idea, and most importantly, safe. Swings can be installed in the yard and in the country, disassembling them into their component parts with the arrival of winter. The photographs show two versions of the swing - for the street and for the home. A compact home swing does not require any additional materials— in the homemade product, only PVC pipes remaining after repair were used.

Child chair

Lightweight chair made of plastic pipes and a piece of bright thick fabric Children will definitely like it. It can become a piece of furniture in a children's playhouse or be used as country furniture. Remains of PVC pipes, 90 degree bends and tees were used for production. The frame is fixed with glue.

Drilling machine

An electric drill or screwdriver is a tool that can always be found in the cabinet. home handyman. You can make a homemade one out of them drilling machine. You just need to attach it to the movable bracket. This will allow the holes to be made even, at a given distance from each other. This homemade product can replace a heavy and serious drilling unit. But it will require painstaking work. This cannot be done without precise fitting and reliable fastening of the components.

Strawberry bed in plastic pipes

The craft is a thick plastic pipe with holes for plants located on top. This method of planting strawberries allows the ripening berries to lie on plastic rather than on the ground, which makes picking easier. In the photo, a plastic pipe is used as a basis for hydroponic system. Pots are inserted into the holes, to which a nutrient solution for plants is supplied.

Vertical beds

This method of planting is reminiscent of the Hanging Gardens of Babylon. Pipes with plants sticking out of holes in the top can be placed in several rows. The foliage covers the frame, giving the impression of plants hanging in the air. In addition to the original appearance, such placement of plants allows you to obtain good harvests even from small areas. Vertical beds made of plastic pipes can be placed in narrow passages summer cottage and even on the loggia or balcony of a city apartment.

Fence - fencing for a site

This use of pipes is more decorative than practical. Such a fence will not stop intruders, but it will personal plot or the palisade is neater and more elegant. Moreover, the craft can be painted in different colors, which will give an additional decorating effect. All that is required for this is the same trims, tees, 90 degree angles and plugs.

Rod-pod - stand for fishing rod

Any fisherman knows what this device is for, and the ability to assemble it from pipes and carry it with you when fishing makes it also convenient. Rod-pod involves several supports for fishing rods, which can be easily achieved using short sections of pipes and fittings. The main emphasis is to create a durable, easy to assemble and disassemble craft. For the fisherman, you can provide a light chair made of the same material. In the photo there is a stand for two fishing rods.

Trellis for plants

These are ordinary racks made of thick pipes with thin pipes mounted horizontally on them. When building a vineyard, you need to expect that the load on the posts and crossbars will constantly increase, so you need to take into account the safety margin for such a homemade project. Don't settle for simple rectangular coasters. The plasticity of the material will allow you to achieve the most fancy shapes to decorate your garden!

Curtain rod made of plastic pipe

A stylish cornice made of plastic pipes can be made from materials left over after renovation. Flanges placed on plastic brackets will help you tightly screw the homemade products to the wall. The curtains themselves are attached to rings placed on the pipe. It is recommended to use such crafts for light types of curtains. They will not hold heavy curtain fabrics. Cornices can be painted metallic paints or leave it “as is”.

Wine rack

Use a shelf or rack to store collection wines. For them, sections of PVC pipes secured in the form of a honeycomb are suitable. Each bottle will have its own “honeycomb”. The structure consists of straight sections sawn 35-40 cm long. They can be folded in any order, fastened together, for example, with glue and filled with collection wine.

Dog pen

It is a frame made of pipes required diameter, built in the form of a cube. The side walls are also assembled from pipes or partially covered with fabric or chain-link. This kind of homemade product is also suitable for setting up rabbit hutches, only the cube of pipes will already have sides no more than 1 meter.

House made of plastic pipes for children

It can be done with gable roof, using bends with a 90-degree bend to attach to the roof ridge. The walls of the house can be covered with fabric, with windows cut into it. It is not necessary to use a house with a classic shape. Your children will surely love buildings in the shape of a pirate ship or a space rocket.

Partition made of plastic pipes (screen)

The partition in the photo consists of 3 frames with opaque material stretched over them. The frames are connected to each other by a movable hinge, which allows you to fold and remove the screen when not needed.

Support for bushes

This design resembles a support for a vineyard, only on a smaller scale. It supports plants and guides their branches in the right side. With a little imagination, you can make, for example, Chinese rose grow in an arch around the gate.

Barrier for doorway

Such a fence will be useful in homes where there are small children or pets. On both sides of the opening, tubes of slightly larger diameter are attached, into which the frame is inserted, as shown in the photograph.

Bow made from polyethylene pipe

We use the elasticity property of a plastic pipe to create a children's bow for shooting. We wrap the neck (handle) with a piece pipe insulation and secure with adhesive tape. A fishing line string is fixed in a groove at the ends of the pipes, which end with plugs. Don’t get carried away and give the craft too large a bend radius. Allow a small amount of travel for the bow's limbs when drawing and shooting.

Lamps

Homemade pipe lamps are amazing in the number of shapes and sizes. It all depends on the person’s imagination. There are only a few homemade products in the photo different types. The main thing when assembling a lamp from plastic pipes is to thread it in time electrical wire, so as not to have to worry about it later, because the design can be quite complex.

Clothes dryer

Of course, like this simple thing usually purchased at a hardware store. But it’s much nicer and cheaper to use homemade dryer. The assembly diagram in the photo does not require explanation.

Flower pots

The simple design of the flower pots allows you to arrange flower pots not just on the windowsill, but in beautiful stands throughout the house. Now you don’t have to worry about puddles on the floor and walls resulting from overflow.

Homemade sled

This homemade product is quite difficult to build; we do not recommend using it as your first pipe craft. But with a little experience, making durable and lightweight sleds will not be difficult. Very comfortable, fun and beautiful.

Heated towel rail in the bathroom

Making a heated towel rail from a polypropylene pipe with your own hands allows you to create non-standard design, for placement in places for which it is impossible to select finished model. The functionality of such a homemade product is much higher than the usual factory one.

Mobile tent

This is the same children's playhouse. But in this case, all connections are made with the expectation of easy assembly and disassembly. A very practical thing - it does not take up much space, it is light and convenient. Attention to the tight-fitting fabric - it must be durable and waterproof enough to withstand the vagaries of the weather. The craft can be used to organize a camp kitchen or protect from the sun.

Football goal

You don't need to be big to play ball or field hockey. iron gate. Enough lightweight design made of PVC pipes, which is also easy to disassemble when winter comes. Although the small goal can be used in winter for playing ice hockey. The craft usually consists of 3 frames, but you can simplify it to 2 or even one frame with fabric stretched over it.

Clothes hanger

It is a vertical pipe with small “shoots” on top for clothing or a full-fledged structure for dressing room With horizontal pipes to accommodate large quantity things on hangers. The photo shows a homemade hanger for children. For adults, the craft should be more durable and use pipes with a slightly larger diameter.

solar collector

Device for heating water. It needs to be placed on the roof and the longer the pipe, the more efficient the heating. Therefore, collector “snakes” made of plastic pipes are usually laid over the entire roof area.

Flower pots and vases

These crafts can be made from pipes and fittings of various diameters by simply sawing off a piece of the desired height. It is customary to decorate finished crafts with colored paper, and they can be placed on a flower shelf previously made from PVC pipes.

Kitchen appliance stand

Knives, forks, spoons different sizes can be inserted into vertically installed pieces of plastic pipes. Crafts are very convenient, and most importantly practical. They look creative in the kitchen. Your guests will be pleasantly surprised.

Pencil scissor stand

Pieces of pipes of different diameters fastened together and placed vertically are good storage not just scissors and pencils. For compactness, they should be fastened into one block. This can be a completely functional desk organizer.

Holder for curling iron or hair dryer

Sections of PVC pipes fixed in the bathroom will securely hold curling irons and hair dryers, and they will not melt when they come into contact with hot elements of the appliances.

Watering hose holder

To prevent the hose from lying in the form of an untidy, ununtangable heap, it can be wound on a self-made holder made of PVC pipes. A practical and convenient homemade product for a personal plot.

Frames for pictures and mirrors

An original and even brutal device for storing photographs, edging paintings or mirrors. It looks very impressive and unusual.

PVC pipe bench

Quite simple, but you need to use it to connect good glue, because the bench should not only be beautiful, but also durable. A bench made of plastic pipes for a summer house - cheap and tasteful.

garden bench

By complicating the design of the bench, you can additionally make a backrest - it turns out very beautiful bench. You can use tubes of different diameters, for example, 50 mm for the side supports and 25 mm for the back and seat.

Containers for seedlings

Essentially they are small flower pots or simply cut 5-7 cm sections of the required diameter. An excellent solution to the problem for those who have plastic scraps left after repairs.

Drip irrigation system

The practical direct purpose of a plastic pipe is to supply water. Drip irrigation occurs through small holes that are drilled at specified distances. Now you don’t have to worry about watering the area between visits to the dacha. And flooding the roots with large volumes of water will no longer threaten you either.

Desk organizer

The device consists of pieces of PVC pipes of different diameters and heights glued together. Looks creative on the table, suitable for home and office.

Bathroom organizer

A convenient device for storing toothbrushes, shaving accessories and other small items. Moreover, each device will have its own separate cell. Looks great in the bathroom with other PVC crafts, such as a heated towel rail and a mirror frame.

Shoe shelf

Convenient storage made from fragments with a diameter of at least 100 mm. The shoes are no longer under the door, but neatly folded on the shelf. Moreover, you can make as many levels as you like.

Glass holder

Installed above the bar counter. A large-diameter pipe is mounted horizontally and a cutout is made wide enough to accommodate the thin stem of the glass. A great addition to a loft style interior.

Place for bicycles

Homemade product for holding the front wheel of one bicycle, as well as for 5, 10 or more. The number of cells corresponds to the number of bikes in the family. Don't forget about possible guests on two wheels. The craft is easy to disassemble for the winter and hide in the pantry for the next season.

Drill stand

The stand represents a section in which the tool is placed so that you don’t have to look for it or it doesn’t get in the way during repair work, lying underfoot. Convenient and most importantly practical craft.

Frame for outdoor cinema screen

The frame of the screen is created by a frame made of PVC pipes with a white fabric stretched over it. You just need to think about the tripod legs. Ready-made factory options are not cheap, but a home-made screen will cost a penny.

Homemade catamaran made from plastic pipes

Quite a large and complex craft. All fastenings must be carefully glued so that the catamaran does not fall apart. Hermetically sealed sections of large diameter can be used as floats.

Notebook Stand

It is a frame to support a laptop. This stand not only allows you to sit comfortably on a table, bed or sofa for work, but also ensures the removal of hot air from the lower and side planes, protecting the laptop from overheating.

Interior decorative items and gifts

A creative approach will help you create truly original things. When making, you must not forget to decorate the crafts with colored paper or paints.

Working with plastic pipes is not just a pleasure to create. This is the embodiment of the wildest ideas and fantasies. In addition, it is not required for operation special tool, sometimes a simple hacksaw, ruler and felt-tip pen are enough. Crafts can be done by the whole family, involving children in this. This strengthens family relationships and develops creative thinking.

Working on a laptop for many hours requires placing it on a surface where it can cool naturally. A stand made of polypropylene pipes is original solution this problem.
The laptop is a great thing, but to work on it all the time you have to look for various devices to protect it from overheating. Apparently device manufacturers do not take into account the mentality Russian consumer, which is ready to operate a unit designed for 3-4 hours of simultaneous use 24 hours a day. That's why the cooling system of laptops is so weak. But our compatriot, a Russian for that matter, will always find a way out of the situation.

About plumbing plastic and sewer pipes ah, a lot has been written, and no one will belittle their merits, because everyone knows that they are especially light and quite durable and strong products that do not rot, do not deteriorate and have excellent appearance. It is precisely these qualities that craftsmen took advantage of, looking for the optimal solution for laptop security. From propylene water and sewer pipes, our left-hander came up with a cute laptop stand that takes no more than forty minutes to make.

So, making a laptop stand from polypropylene water pipes.

For this you need:

1. A drawing of the stand, which in terms of parameters corresponds to the dimensions of a particular laptop, is therefore carried out on an individual basis.

2. Five small pieces of polypropylene water pipe. Here she is the main building material, performs supporting and holding functions. You shouldn’t skimp on the size of the scraps, but you don’t need excessively long pieces either.

3. Fittings, and specifically, ordinary connecting corners for installing corner elements. After all, it is known that it is impossible to bend a polypropylene pipe, it is not metal, it will simply break. Therefore, to build a structure with turns, you need separate corner elements, or, more simply, corners.

4. Welding machine or iron. Since our pipes are polypropylene, and we are going to make relatively complex design, consisting of tubes and connecting elements, then it is for this process that we need a welding machine. He is the main one actor in the process of creating an amazing and quite cute stand from plastic water pipes.

5. Knife or special scissors for plastic pipes. After all, we have to cut the tubes to the size corresponding to the design diagram.

The manufacturing process consists of several stages. The first of them is to measure the tubes to size and cut them with special scissors. We check the end ends for the absence of burrs, and if any occur, we process them with emery cloth. Nothing should interfere with us when working with the welding machine.

The second stage is the actual assembly of the structure. To do this, turn on the iron and wait for it to heat up to operating temperature. Next, we approach the process, as with conventional pipe soldering. The main thing at this point is to be careful and careful; the individual parts for connection must be inserted into the welding machine evenly so that it turns out beautiful seam. The result should be a stand like in the picture.

Making such a stand from sewer pipes is much simpler, since it does not require a welding machine. For the stand, 32 mm pipes are suitable, approximately in the same configuration as in the case of propylene water pipes: 6 straight elbows, one coupling and two short pipes. Assembly will take about 10 minutes. It looks the same as the first one.