Making roller blinds from fabric with your own hands. DIY roller blinds step by step instructions DIY fabric roller blinds

Interior decor also implies the need to decorate the window. If purchased ready-made options are not suitable, you can make roller blinds with your own hands. They are not that difficult to make, but in the absence of experience in similar works should take the master class as a basis.

Advantages and features of roller blinds

Basic structural elements: roller, woven material. When unfolded, the curtains completely cover the windows. To lift the material, a roller hidden in a special pocket is used, on which the fabric is wound. This device allows you to control the lighting intensity of the room.

Other advantages:

• Versatility, since such curtains can be used in rooms of different purposes and styles;
• Possibility of installation on a window frame made of any material (wooden, plastic window blocks);
• Roller blinds can be successfully combined with curtains.

Considering that the design is based on woven material, a wide selection of shades and patterns is offered.

Roll and Roman: main differences

Both options are similar in external characteristics, but only partially, since when the material of the Roman analogue is raised, horizontally oriented folds are formed. The fabric is assembled by tying it together using cords hidden on the back side.

Roll systems are carefully wound onto special rods, and they are also easier to make yourself

Ready-made roller blinds are assembled into a kind of roller. In this case, the fabric is wound onto a rod, which this option is located in the upper part of the structure, and can also be hidden by a box.

Roman systems rise with the help of cords (chains) and form horizontal waves-folds.

To make roller blinds with your own hands, a slightly different design is taken as a basis: the roller is located at the bottom of the canvas. And you will have to do the assembly of the material yourself each time you open the windows. To fix the roller, garters are used, attached to the upper part of the canvas.

What to consider when choosing a material?

The main design element is woven fabric. The choice of fabric is very wide; you will have to consider options that differ in color, pattern, density, quality and properties of the fabric. Any master class begins with preparing the material.

Main criteria for selection:

1. The density of the fabric will provide the desired level of shading of the room. The thinner the fabric, the brighter the room will be when the roller blinds are lowered. If the windows face the southwest side, it is recommended to focus on this quality of the canvas.
2. A method of applying a design/pattern to fabric. You can find both one-sided and two-sided matter. When choosing, you should pay attention to fabric with a double-sided pattern, since roller blinds will be noticeable from the street. However, this mostly applies to the first floors of apartment buildings.
3. The antistatic properties of the material will reduce the intensity of dust formation on the fabric. As a result, maintenance of the structure will need to be performed less frequently.
4. If you choose fabric with reflective properties, the microclimate of the room will improve during the hot season.

You should not choose a fabric that matches the wallpaper: this will make the windows merge with the walls. It is advisable that the shade of the curtains be in harmony with the color of the furniture upholstery.

It happens that the search did not produce results and a suitable fabric was not found. For example, the materials of interest are characterized by low density, and the pattern will be applied only on one side. There is a way out of this situation - you can do it roller blinds with your own hands from double fabric. The fabric in this case is placed with the pattern outward on both sides.

Preparation: taking measurements

There are several options for installing such structures:

• On top of the window opening;
• In the opening;
• On the window frame.

Four installation methods: on the sash (implemented only on openable parts of windows), inside the window opening, on the wall and ceiling

If we take the master class as a basis, then one of initial stages is taking measurements. Measurements should be taken based on the way the curtains are installed.

The length of the canvas consists of several values: the height of the surface to be coated (frame or opening) + 15 cm for the pocket + 2 cm for edge processing. The width, again, corresponds to the dimensions of the surface to be coated (frame or window opening), to given value the same 2 cm is added, which is allocated for processing sections of material.

Tool preparation

When deciding how to make roller blinds, you need to take into account the differences in the mechanisms of a purchased and home-made product.

Basic materials, as well as tools for work:

• Sewing machine;
• Furniture stapler;
• Wooden planks, 2 pcs.;
• Metal corner;
• Woven material;
• Tapes for fastening;
• Decor elements.

There are several ways to attach ribbons, for example, they tie a roll or use buttons.

Step-by-step instructions for making curtains

The master class will allow you to consistently perform the work of sewing and installing the completed structure on plastic or wooden windows. First of all, the material must be cut in accordance with previously made measurements.

Diagram and dimensions of fabric roller blinds

Step 1: Trimming material

If single-sided fabric is selected, two patterns are prepared that need to be stitched. First, both cuts of the mother are connected to each other with a basting stitch. Moreover, the front side should be inside.

Step 2: Stitching and fabric cutting

The canvas is turned inside out, resulting in the pattern being on the outside. Now you need to stitch open area on a typewriter.

Master Class: Step-by-step instructions for making curtains

The master class allows you to cover all the details when making curtains, in particular, it takes into account important nuance: in order to make the structure heavier, it is attached to the bottom wooden plank. To do this, the fabric needs to be stitched at the bottom, after tucking in the edge of the fabric. A strap is inserted into the resulting pocket.

Step 3: Attaching curtains to the base of the cornice

To attach the curtain to the base (wooden slats), you need to straighten it on a horizontal surface. A plank is placed on top, then the prepared fabric is wrapped once around this base.

Ready option fastened with staples or glue to the cornice, then rolled into a roll with tiebacks and everything is ready.

Used for fastening furniture stapler. Garters can be sewn on at the fabric processing stage.

If you have chosen the simplest possible master class, then you can attach the tapes using the same stapler. Their length should exceed the dimensions of the canvas by 15-20 cm.

This will allow you to tie the ribbons from below under the roller when assembling the curtains. If desired, you can provide the option of attaching ribbons with buttons, then a slightly smaller supply of material is taken.

Step 4: Installation of the structure in a window opening

All that remains is to install the structure in the window opening. For this purpose they are used metal corners. They are attached with self-tapping screws to the wall in the opening or directly on the frame.

Then the curtain is installed, fastening is carried out at the base to the corners. Thanks to step-by-step instructions you can create roller blinds desired design and colors yourself.

Russia, Moscow region, Moscow +79041000555

DIY roller blinds: step-by-step instruction+ video

Takes ~5 minutes to read

Save

Every housewife dreams of the interior of her home changing from time to time. There are many ways to do this. The simplest and cheapest is to change the curtains. They can be purchased at any market or store. This will be easy to do, since the choice of curtains is huge. But the best solution I will sew the curtains myself. Even someone who has never sewed such products can easily cope with this task. You will learn how to make roller blinds with your own hands by reading the step-by-step instructions of the article to the end.

Save

Disadvantages and advantages of such curtains

Advantages:

1. No light leaks through them, nothing is visible through them, that is, no one will be able to look into your window.
2. They can be hung anywhere.
3. They take up little space.
4. Fresh air flows easily and freely through the roller blinds.
5. These curtains are suitable for any room.
6. Roller blinds can be hung either independently or in addition to others.
7. Their selection is huge.

Flaws:

1. Roller blinds absorb unpleasant odors.
2. They need to be constantly looked after.
3. After a while they may become warped.
4. The mechanism that raises the roller blind quickly breaks down.

Save

How to sew roller blinds on plastic windows with your own hands

To sew roller blinds with your own hands, you need to choose the right fabric. When choosing a fabric, you need to consider that it is:

• Natural;
• Moisture-repellent;
• Reflected the light.

To make roller blinds, you can use fabric of one color or multi-colored and with a pattern. It will depend only on you and your choice.

Making it yourself: step-by-step instructions (photos and videos)

Save

To make roller blinds with your own hands you will need:

• Textile.
• Cord.
• Rope.
• Ribbon.
• Weighting agent (metal or wood).
• Rod shaft (wooden beam or metal tube).
• Screwdriver.
• Self-tapping screws.
• Drill.
• Iron.
• Sewing machine.
• Fasteners

Save

Master Class

1. Let's determine the width of the roller blind. Measure the length of the roller and subtract one centimeter from the resulting length.
2. Now let's determine the length of the curtain. To do this, measure the distance from the roller to the window sill. Add twenty centimeters to the result.
3. Now make a curtain pattern. Measure on the fabric the width and length that you obtained when measuring. Cut out the resulting rectangle. There should be two such rectangular segments.
4. Fold the pieces right sides inward and sew with three sides. You should end up with a bag.
5. Turn the resulting bag inside out and iron it with an iron.
6. Let's move on to attaching the weighting material. Its length should match the width of the curtain. This is necessary so that the roller blinds do not hang on the plastic window. Attach the weighting material, tuck the fabric and sew, departing five millimeters from it.
7. Now you need to prepare the tapes. With their help, the curtain will hang rolled up. Cut a ribbon eight centimeters wide from the fabric. And the length of the ribbon depends on the height of the window and is calculated using the following formula: 2* height of the window opening + 30.
8. Fold the resulting ribbon lengthwise, right side inward, and sew. Then the tape must be turned out, ironed and the open side sewn up. DIY roller blinds are ready.

Save

DIY mechanism for roller blinds

First option.

To make the mechanism you will need:

• Staples;
• Video clip;
• Duct tape;
• Screwdriver.

Manufacturing stages:

• Let's start with the staples. If the curtain is located inside the frame, then the staples are placed three centimeters below the top of the curtain. If the curtain will be located outside, then the staples must be secured five centimeters above the window opening. Bracket with round hole is installed on the right side, and with a square hole - on the left side.
• The distance between the staples should be the same as the length of the roller. If so, secure the roller.
• Now we attach the curtain to the roller. Place it face up and place the roller at the top of the curtain. Wrap the edge of the fabric around the roller and secure it with adhesive tape.
• Throw the ribbons over the roller and secure them in the center with a stapler.
• Insert the curtain roller into the brackets. The roller blind for the plastic window is ready.

Save

Second option.

For it you will need:

1. Bar.
2. Sticky double sided tape.
3. Glue gun.
4. Special fastenings.
5. Cord and hooks.
6. Wooden slats.
7. Weighting agent.

Manufacturing instructions:

• First you need to saw off wooden slats. Its length should be one centimeter less than the width of the curtain.
• Cover it with the same fabric from which the roller blind was made.
• Glue adhesive double-sided tape to the bottom of the block.
• On back side The block needs to be attached with special fastenings.
• Insert a weighting agent into the sewn roller blind.
• Attach the roller blind to the prepared cornice.
• Take the cords, tie them and lead them through the special holes. Then line them up and tie a knot.

A video on making curtains and a mechanism will help you cope with this task.

How to make with garter ribbon

To make such a roller blind you will need:

• textile;
• sewing machine;
• iron;
• weighting agent;
• block and lath.

Save

Manufacturing stages:

1. First you need to make a pattern from the fabric. Measure the desired width and length of the future curtain. Cut out the resulting rectangle and sew it on three sides. Turn the fabric inside out and iron it.
2. Insert the strip into the unstitched side, and then sew it up. This will be the bottom.
3. Attach the top of the roller blind to the block.
4. Now prepare the ribbons. They should be twice as long as the roller blind itself. There should be two of these tapes.
5. Attach the ribbon to the block.
6. The roller blind is ready.

Do-it-yourself roller blinds

To make roller blinds you will need:

• fabric for sewing;
• paper template;
• a simple pencil;
• a piece of soap or chalk;
• ruler;
• adhesive pad;
• fringe;
• special glue for fabric.

Save

Master class on making them:

1. First you need to make a pattern. It is done in the same way as for regular roller blinds. But there is a difference - you need to leave an allowance of 25 centimeters. This is necessary to finish the edge.
2. Now make a template. It is made from plain paper. Its width is equal to the height of the carved edge, and its length corresponds to the length of the roller minus one centimeter. On the resulting rectangle, make the pattern you like.
3. The rectangle must be folded like an accordion. Draw the desired pattern on the first strip. Using this pattern, cut the remaining stripes. So, the pattern will be the same across the entire width.
4. Make a drawstring. Insert the tube into it and sew up the edges.
5. Place the paper template under the drawstring and secure with pins. Trace the pattern with a piece of chalk.
6. Glue the fringe along the bottom edge.
7. Attach the resulting roller blind to the roller.

Now you know how to make roller blinds with your own hands, as well as how to make roller blinds yourself without the help of a specialist. Good luck!

Thanks to ergonomics and varied design roller blinds or, as they are also called, roller blinds and roller blinds are becoming more popular every year. The production of roller shutters today is very profitable and the market has no shortage of their assortment, but you can create your own unique interior only by adding elements to it self made, for example, make roller blinds for plastic windows with your own hands. Of course, they will resemble the roller blinds offered to us on the market, only in their lifting design and laconicism, but they will inevitably become the highlight of the entire furnishings in the room.

Sewing such curtains does not require large financial costs and time, and even a novice craftswoman can handle it.

The choice of textiles for making roller blinds with your own hands according to the step-by-step instructions offered below is unlimited. On sale you can find fabrics designed specifically for window curtains this type: dense and transparent, plain and printed, smooth and embossed, as well as light-proof materials of the new generation Blackout and Screen, providing complete shading in the room. They are ideal for the bedroom, and if you are planning to update the curtains in the bathroom, give preference to fabric with water-repellent impregnation. Before sewing roller blinds from such materials, do not forget to study the recommendations for caring for them: is washing acceptable, if so, at what temperature, etc.

If you wish, you can also make roller shutters yourself from ordinary curtain or cotton fabrics. They do not have high antistatic and dirt-repellent properties, but they are also much cheaper. Moreover, the master class that we offer does not oblige you to choose only special materials for roller shutters. For curtains made using it step by step, you can choose any textile fabric suitable for realizing your design ideas: curtain fabric, satin, chintz, poplin, linen, cotton. The main condition is that the fabrics for the front and back sides must be of the same texture and not fade. Otherwise, when washed, they will shrink differently, the curtain will warp and lose its attractiveness.

How to make roller blinds with your own hands in a couple of hours: step-by-step instructions

To make roller blinds with your own hands you need minimal amount fabric and at the same time the result is a beautiful, stylish and maximally functional product. Such a curtain can cover not only a window, but also a glass door or be used as an original door for a small cabinet.

In order to sew roller blinds with your own hands we will need:

• sewing machine;
• two pieces of the same type, but different in design;
• two wooden bars approximately 2 and 1 cm wide and a length equal to the width of the finished curtain;
• five ring screws;
• three hook screws;
• screwdriver;
• cord, braid or tape for raising and lowering curtains;
• scissors, centimeter, thread, pencil.

Our roller blind will be mounted on the window opening. When unfolded, it should extend 10-12 cm beyond its borders in width, and in length go down to the window sill. Based on this, we take measurements. To the results obtained, add 3 cm to the width for allowances on the side seams and 10 cm to the length, taking into account that we will fix the curtain at a height of 7 cm above the window.

If a roller blind is installed above the upper slope of a window opening, its size should be wider than the opening by at least 10 cm or more.

As an example, let's take a standard window opening with a width of 146 cm and a height of 140 cm. This means you need to cut out two rectangular pieces of fabric (since you plan to sew a double curtain) with a width of 149 cm and a length of at least 150 cm or more. By the way, if the width of the fabric is 150 cm, it is not at all necessary to trim the roller blind by this extra centimeter. Just cut out a square 150x150cm. If the width of the fabric you like is less than one and a half meters, you will have to sew the curtain from 4 cuts (2 for the front side and 2 for the back), and decorate the central seams with decorative tape or braid.

Step 1: Sew the curtain

Place the pieces of fabric right sides together and sew them on the sides and top, departing 1.5 cm from the edges. Leave the bottom edge unstitched. We turn the product right side out, bend the bottom edge inward by 1.5 cm, stitch and thoroughly iron what happened on both sides.
Now we need to sew “pockets” for the weighting and fastening strips. To do this, we decide which side of the curtain will be the front side (looking into the room) and which side will be the back side and lay it out on a flat surface with the wrong side up. Then we bend the top edge by 3 cm, the bottom by 1.5 cm, stitch and insert the strips: the one that is wider into the top pocket, and the one that is narrower into the bottom.

Step 2: Screw in the ring screws

We screw ring screws into the upper (fastening) bar at a distance of 10 cm from the edges through the fabric (two on top and two below them on the front side). We also screw in the fifth screw from the front side, from one edge, stepping back from it at a distance of 5 cm.

Step 3: Attach the Lifting Cords

To roll the roller blind, you need cords. What they will be like depends only on your imagination: a regular cord, a nylon tape, a decorative braid, a tape made of fabric in a contrasting color to the curtains. Before cutting them to the required length, we make some simple calculations. The length of the first cord is equal to the length of the curtain multiplied by three. The length of the second cord is exactly the same plus another half the length of the curtain. In our case it will be 450 cm and 525 cm.

We thread both cords into the screw rings on the top bar and fasten them as shown in the figure. In this case, the cord having longer length need to be tied to a ring located further from the separate, fifth side screw.

Step 4: The curtain and the original lifting mechanism are ready

We lower both cords along the wrong side of our curtains, bring them through the bottom to the front side, pass them through all three rings screwed into it and tie them together.

Step 5: Install the curtain on the window

Before hanging our wonderful curtain, you need to screw two hook-screws above the window opening. The main thing is to screw them in so that they are located exactly opposite the upper rings attached to the mounting strip. The same principle can be used to make not only curtains, but also blinds with your own hands.

To do this, we place the curtain on the opening above the window and, with a pencil, mark the places where the hooks and screws should be, screw them in and hang the curtain. It is advisable to screw in another hook on the side of the window, through which it will be convenient to throw the cords when the curtain is raised, thereby preventing them from getting tangled.

Ideas with photos for inspiration

Our master class on how to make it yourself is just a guide to action. With its help, you can sew curtains completely different from the previous ones. They will differ in size, design, and type of lifting cords. By changing them according to your mood, weather, time of year, you can easily and simply transform your interior every time.

Hand Made curtains bring the warmth of human hands and a feeling of comfort and tranquility to the interior
Such curtains can be attached not only to a block, but also to a cornice using ordinary curtain rods, and if the width of the fabric does not allow, sew not one wide curtain, but several narrow curtains
Such curtains can be installed not only on the opening, but also on each sash or into a window opening. In this case, you will have to take into account that you can open the window only when the curtain is raised to the very top or use your imagination and come up with your own original mount Ordinary nylon tapes can be used as lifting cords Instead of screw rings, ordinary plastic rings threaded through ribbons are sometimes used to support lifting cords
If the window is small, you can do without a lifting mechanism, and roll the curtain fabric manually and fix it with one tape in the center

Every housewife can create a cozy and unique atmosphere in her house or apartment. The main thing you need for this is the desire to create, imagination and a sense of proportion. And you can start with the simplest thing - replacing ready-made curtains with ones made by yourself and according to your own design.

For creating comfortable conditions premises and to prevent entry sun rays inside, it is recommended to make roller blinds with your own hands. Step-by-step instructions will help you choose the right material and components for this mechanism, as well as carry out necessary calculations. This option is much more profitable and economical than purchasing products in stores. In addition, the personal creation of original and unique design always a pleasure.

It is quite possible to make such curtains yourself

The Importance of Soaking

The material is impregnated with special antibacterial agents. The degree of transparency varies: transparent, translucent, darkening. Choice color solutions and designs are as diverse as possible.

Attention! Pre-treated polyester is often used.

Impregnations:

• Antistatic impregnation prevents dust from sticking to the fabric.
• Spraying in various shades adds a modern look - metallic color, pearlescent pigments add a soft shine.
• Thanks to the Teflon coating, the fabric has special water- and dirt-repellent properties. Suitable option for the kitchen and balcony.
• Fire protection is suitable for any building.

Forming a protective layer of fabric, impregnations are considered absolutely safe and do not cause harm.

Carrying out calculations

Before you start sewing the product, you should calculate the amount of material. When installing fasteners in a window opening, measure it directly. If in wooden frame, measure glass parameters.

Marking the location of future curtains

Dimensions of prepared cuts for sewing:

• width of the canvas – width of the glass (edge), for allowances +20-40 mm;
• length – opening height +50-150 mm.

Canvases with these parameters are needed in two copies - for the front side and the back. Their drawing may differ. Or it can be done the same way. Ribbons and decorative cords are needed to create garters. The length of the strips of fabric is equal to 2 lengths of the fabric + 250 mm additionally.

Preparation of materials

For sewing and fastening the following are used:

• a wooden beam for fastening, its parameters are 30x40 mm, can be replaced with a metal tube; fastening parameters correspond to the width of the curtains;
• it is allowed to use ready-made purchased cassette system as a fastening element;
• a metal rod or a wooden plank is used as weighting agents;
• paper clips and stapler for furniture;
• screwdriver with screws for installation work fastenings;
• sewing elements.

The fabric is subject to careful selection. Thanks to the use of impregnations, the fabric becomes elastic and easy to care for.

Fastening the blade

Material with light transmitting properties:

• light scattering - partially transmits the sun's rays into the room;
• light reflection is impenetrable to rays, thereby maintaining coolness in the room.

Whether it is a plain material, or with photo printing, or with expressive ornaments, You should follow the basic rules when choosing:

• harmony color range textiles with furniture;
• in canteens and kitchen rooms It is not recommended to use dark monochromatic solutions; floral patterns and abstractions are suitable;
• the image of the canvas should not be made exactly as on the wallpaper;

Note! It is recommended to use the following color combinations: chocolate with gold, beige and cream tone, blue with silver, yellow and white, red with gold and beige.

• the translucency of the fabric visually expands the room;
• the transverse stripes of the wall are made wider;
• placing the pattern in a vertical position increases the height of the ceilings;
• windows facing the south side are made cooler, for this purpose blue, green and purple cool colors are used, northern rooms will be warmer due to orange, red and yellow tones;
• Blackout darkens the room thanks to its dense texture that does not allow light to pass through.

One way to finalize

Performance

The work is performed in the following order:

• Lay out the fabric and sew it on the wrong side. Calculations are taken into account. On both sides in length, on one side in width. The resulting pouch turns onto the face.

In this case, after sewing, a pocket is made, the fabric is ironed and a weight is inserted.

• If a pocket is made as a weighting material, it is necessary to sew up the gap. Or leave it open when inserting it into inner part bag.

After placing the weighting material inside the bag, a curtain is sewn over it. The offset is 5 mm. This will prevent it from curling. Afterwards the gap is sewn up.

• The ironed curtain is wrapped around the bar and connected to each other with a stapler. If a pipe is used for fastening, it is wrapped and stitched. You can sew fabric by hand.
• Pre-prepared bandages are thrown over the top fastening and secured using a stapler or by tacking with thread with neat stitches.
• The beam is attached to the opening or to the window frame along the bottom. The upper part is decorated with figured elements.

Attention! To be able to change the curtain, hooks or zippers are used instead of a stapler.

Using rings in the roller blind system

For plastic windows, canvases are made and attached directly to the windows themselves. In this case, adhesive tape is used. A wooden strip is used as a weighting material.

Thanks to hand-sewn curtains in several variations, you can change the design of the building, depending on your mood and seasons.

To create your own roller blinds, step-by-step instructions and a video are provided.

Locking mechanism

To fix the product, you can create a so-called remote curtain mechanism. Fabric loops or plastic rings are sewn to the upper part. The cord is then attached to the top side of the window. It is better to use decorative. The cord comes down through the bottom and passes through the rings.

The left cord is passed through the ring along right side and vice versa. The ends that remain free are used to open and close the canvas. If necessary, fixation is carried out in the desired state.

The length of the cord used is determined when the fabric is completely rolled up. The excess is cut off and the ends are tied together.

This system does not require manual intervention when folding curtains - just use the cord

Using screws, the mechanism is made in a similar way. The ring is screwed into top part openings or hooks. In this way, the position can be changed without manually winding the curtain into a roll. This happens automatically. The cord or tape is placed more than 100 mm from the extreme sides of the canvas to prevent jumping out.

Thus, you create a roller blind with your own hands. Step-by-step instructions with photos are included to explain all processes. Ready product not only for closing window openings, but is also used for glass doors. Saves the room from sunlight and acts as an interior decoration. Moreover, designers do not recommend using blinds for home furnishings, which are considered an office option. Roller blinds are much more suitable for creating a cozy and homely atmosphere that are convenient to use.

Among the huge variety of curtains, roller blinds are of particular interest to consumers. The reason for this choice is quite compelling, in our small apartments It is quite difficult to place not only cascades of heavy curtains, but even the most necessary furniture. Therefore, the issue of saving space is more than acute.

DIY roller blinds - photo

Roller blinds partially solve this problem, as they take up very little space due to their placement close to the glass unit. But the cost of this product is considerable, but making roller blinds with your own hands is not at all difficult. In this case, you can choose a material that matches your preferences in color and texture.

Types of roller blinds

In order to start making roller blinds, you need to understand what these products are. Essentially, this is a rectangular piece of canvas located in the window opening or very close to it. Opening the curtains occurs by raising the fabric to the required height, while the material is rolled into a roll (hence the name).

Exist the following types roller blinds, differing mainly in the type of lifting mechanism design and installation method:

• Roller blinds can be installed either on the wall using a curtain rod or on the frame itself. It doesn’t matter whether it’s wooden or plastic window in your apartment. It’s just that in the first case, a block with self-tapping screws will be used to attach the curtain, in the second, double-sided adhesive tape will be used. Roller blinds can also be mounted individually on each window sash.
• Another difference is the location of the roller on which the fabric is wound; the roller can be located either at the top of the curtain or at the bottom.
• In addition, roller blinds can be divided according to the functions they perform. For example, curtains made of thick, light-transmitting fabric are used to completely darken a room. And curtains made of openwork fabric will imitate stained glass or simply dim the light from the window.

An interesting option for additional room decoration are day-night roller blinds, in which thick fabric combined with transparent material in two layers. Depending on the time of day, you can use one or another canvas.

Step-by-step creation of roller blinds

Regardless of the type of roller blind, the manufacturing technology is basically the same: first prepare the fabric, then lifting mechanism. Therefore, we offer instructions on step by step creation roller blinds.

Choosing fabric for curtains. The best option there will be, of course special material With protective layers, which not only practically does not become dirty, but also has antistatic properties and is resistant to fading and deformation.

Depending on where the curtain will be fixed, we measure the dimensions of either the window opening, the sash, or the window frame. From the fabric we cut out curtains of the appropriate size with an allowance of 2.5 cm at the edges and 15 cm along the length. In this case, each curtain has two stripes, for the front and back sides. If the window is very wide and it is not possible to make a curtain from one piece of material, we cut out the fabric so that the seam falls on the window frame.

We sew the front and back sides; to do this, we fold the pieces “face to face” and sew from the inside on three sides. Then we turn the fabric inside out, sew the rest of the curtain and carefully iron the seams.

Roller blinds with bottom roller

The easiest way to make roller blinds with a lower shaft:

Unfortunately, you will have to roll up such curtains manually and secure them with tapes.

Roller blinds on the cornice

More difficult option in production, but more convenient to use. Such roller blinds can be opened to any height, not manually, but using a counterweight system:

Raising the curtains is carried out by tensioning the cord, which is fixed at the required degree of opening of the curtain on the same hook.

How to install a roller blind on a finished mechanism?

Most effective option, but requiring some investment, install the curtain on a ready-made mechanism:

• To do this, you need to purchase a special set consisting of a lifting mechanism, shaft and fastening, which is subsequently adjusted to the size of the window.

• The bottom of the canvas is designed similarly to the previous options; one of the Velcro elements is sewn onto the top edge. The second part of the adhesive tape is attached to the shaft using double sided tape or glue.
• Brackets and a lifting mechanism are secured to the wall over the window opening, the curtain is secured to the shaft and rolled into a roll. The entire structure is installed in its normal place and the operation of the roller blinds is checked.

What might homemade roller blinds look like? Photo examples of ready-made options

As you can see, making roller blinds is not particularly difficult and can be done even by an inexperienced person. But here is the opportunity to create a worthy product of your own unique design really deserves attention. Below are options for roller blinds (photos and examples) that were made by hand: