Wall shelves whose photos are amazing: a review of the best models of shelves and racks in the interior. Do-it-yourself corner shelves on the wall made of wood and glass (photo) Do-it-yourself corner shelf for a room

Very often you have to hang shelves on the walls to accommodate all the elements. To rationally plan the interior, it is worth using the corners and, thus, freeing up the walls for cabinets and shelving. To do this, you need a corner shelf, which you can make yourself from existing materials. The article will discuss basic recommendations on how to make a corner shelf, as well as basic examples of designs.

Place corner shelves in different rooms

You can install a corner shelf in any room, but in most cases it is great for the kitchen or bathroom. Any housewife will quickly place on it a variety of jars with seasonings, cereals and other kitchen utensils, and in the bathroom such a shelf near the mirror will allow you to accommodate all hygiene products and free up the necessary drawers. It is worth noting that these rooms have a fairly high level of humidity, which means that the wood will need to be additionally treated with antiseptics and at least two layers of paint applied. The best option will become plastic or glass, since they have larger number advantages:

resistant to moisture and temperature changes;
mold and fungi do not appear on surfaces;
withstand heavy weight;
easy to clean;
A variety of colors will allow the design to fit into any interior.

Also corner shelves on the wall - this rational option, which is suitable for bedrooms, children's rooms and living rooms. Any other furniture can be placed under the shelf, for example:

nightstand;
computer desk;
armchair.

Regardless of what material was used, the design will look impressive and presentable. The corner shelf will conveniently accommodate all sorts of little things: books, photographs, dishes, candles, toys and much more.

Note! To add more impact to a corner shelf, you can add LED lighting to it. Using this method, designers add depth to the wall.

Required materials and tools

Before you start planning and manufacturing, it is worth collecting the available materials and calculating: will there be enough of them? You can make your own corner shelf from a wide variety of materials, such as:

wooden boards;
plywood;
glass;
plastic;
window sill profiles;
iron and others.

The first 4 options are considered the most common and practical. Anyone can handle them, and there’s no need to special tool, as is the case with glass or iron. The set of tools in each case will be varied, but if we talk about lumber, then it is worth preparing in advance:

hacksaw;
jigsaw (manual or electric);
saw;
stationery knife;
drill;
sandpaper;
glue and fasteners;
ruler;
pencil;
paints and varnishes (paint or varnish);
tassels.

Note! For comparison, when making a corner glass shelf you will need fewer tools: fasteners (screws and dowels), level, drill, felt-tip pen and ruler.

Step-by-step instruction

As the main suitable material regular board, which remained from the renovation. The width should be selected individually, based on the items that will be placed on it and the place where it will be installed.
In addition, for fastening you will need glue with a dispenser and screws (3.0x25 mm). Semicircular slats can be used as decoration.
We mark the board at a 45° angle to the required length and use a hacksaw to cut it at an angle of 45°. As a result, we get 4 shelves.
From the remains of the board you need to cut out racks of the same size (for example, 5x20 cm) in the amount of 6 pieces.
All elements must be cleaned sandpaper until perfectly smooth.
Let's start assembling the structure. Each shelf, except the top one, must be secured with two racks. The markings are applied in the middle, then the elements are fastened with screws. To strengthen the fasteners, use PVA glue.
For ease of fastening, the middle shelf posts are placed along the edges.
The remaining parts of the corner shelf are assembled in the same way.
If you wish and have free time, you can decorate the shelves using semicircular slats. So, with their help you can make low handrails so that small or round accessories do not fall out. At the final stage, the shelf is painted.

Note! After the first element has been cut out, it is necessary to place it against the wall and check the correctness of the calculations. To prevent the board from bursting when fastening, the hole for the self-tapping screws is drilled slightly smaller than the screws.

Corner glass shelf

To make a small and simple design, you won’t need a lot of time and special skills, even if we are talking about a glass shelf. So, to be precise and produce a design correct sizes, it is necessary to take measurements. After this, a diagram is drawn on paper indicating all the obtained parameters.

You can cut the glass yourself; if you don’t have a tool, go to a special workshop. Here craftsmen can cut out the required shape in a few minutes. The following can act as holders:

metal rods;
aluminum profile;
wooden frame.

IN ideal It’s worth buying special holders that will come with screws and dowels for fastening. The holders are attached to the wall and the glasses are put on one by one. With help building level evenness is checked. As a result, the cost of the shelf will be lower than the cost of a new one from the store.

Note! For convenience, experts recommend creating a template for the future shelf from cardboard. This will avoid inaccuracies.

Only by strictly observing the data obtained after measurements can a high-quality and reliable product be manufactured, in particular, a corner shelf. It is very important to measure between the walls, since this angle is not always 90°. You can take as a basis the most different materials that are gathering dust in a barn or garage.

Wall shelves in the interior allow you to optimize the use of space in the room, expand its functionality and increase ergonomics. The space gets rid of massive furniture, which adds more volume and functional practicality to the structure of the room.

Remember! Corner shelves will look great, and.

Home design using corner furniture designs looks aesthetically pleasing and adds style to the room.

Shelves are a successful piece of furniture, which makes it possible to organize the arrangement of various things and objects in space as rationally as possible.

On the corner shelves it is possible to successfully place non-bulky household appliances, dishes, books, souvenirs, paintings, photographs and other little things. Thus, corner shelves effectively solve the problem of placing things in a limited room.

Corner shelves in the interior

Wall mounted shelves can be installed in all types of residential and office areas. In the dining room mezzanine, it is advisable to install it directly near the working area and use it for safety kitchen utensils: dish sets, containers for bulk substances and seasonings.

The lightness and convenience of the design of corner shelves makes them a good alternative corner cabinets even in the kitchen. On the one hand, room space is saved, on the other hand, beautiful dishes, souvenirs and other interesting items are located in an accessible and open place for viewing.

Corner shelves are indispensable for decorating a workspace in home office and office. It will fit well into the business interior of the room, filling the free corner space. This allows you to concentrate the things necessary for work in a limited area.

In places with small space this furniture layout is ideal solution. The design of the room, complemented by a corner shelf, creates an excellent environment for relaxation and intellectual time spent reading books. The furniture corner can be decorated with flowers, which are best placed on top floors designs. This greatly refreshes the room and adds coziness and sophistication to the atmosphere. Shelves placed in the corners are relevant in the design of book depositories in homes.

As a result of the creative imagination and imagination of designers, a bookshelf on the wall can turn into an original device that only vaguely resembles a dull object.

Corner shelves are not only compact and practical, but can also amaze with their stylish and aesthetic appearance.

Beautiful and original bookshelves will create coziness and comfort in the family library, demonstrating the sophistication of your taste and creative imagination. Unusual corner bookshelves, in addition to storing books, can be a wonderful decoration for the interior of a library.

How to choose a corner shelf?

The choice of corner shelf depends on the size of the room. At sufficient quantity free space, shelves can be installed anywhere in the room, without particularly thinking about the method of fastening. If there is a shortage of space in the room, it is advisable to use corner structures for attaching racks and shelves. They can be placed in any suitable place, even place it above furniture standing in the same corner.

Hanging corner shelves with lighting elements will look great in the living room. This constructive solution visually divides the space, focuses attention on certain areas of the room.

A good option would be to place shelves in the corners near the sofa. Corner shelves can be standard or exclusive, varied in type technical design: vertical, horizontal, in the form of a ladder.

Shelves arranged in a chaotic manner look good, but this option requires a thoughtful design.

In a children's room, a corner furniture structure in the form of a shelf will effectively solve the problem of optimizing the play space for a child. Decorate your baby's room with educational details and visually expand the space, making it more comfortable.

Corner shelves are also appropriate in the bedroom. They have a decorative purpose and reflect the individual taste of the owner. Wooden shelves are better suited for a bedroom.

Corner shelf materials

Shelves made of plastic, organic glass or chromed metal are ideal for the bathroom. The choice of material for making shelves is influenced by the overall design concept of the room. The texture of the material must correspond to the functional purpose of the room.

The design features of the corner shelf - the absence of a front or wall - allow this to be installed furniture product in any type of room. The material from which the shelves are made is very diverse: glass, metal, synthetic plastic materials, mirror, stone, wood.

This makes it possible to individually design a room and decorate certain areas of the home in an individual style. Corner shelves can be decorated built into the structure LED backlight or small spotlights.

Shelves are fixed to the wall different ways– hidden and decorative. To decorate corner furniture structures, cables, stones, chains, and textile materials are used.

For almost any interior wall shelf universal and will fit organically into the space, turn an apartment, office, room with any purpose into a stylish and ultra-modern place.

The corners in the room almost always remain unoccupied, and yet there is enough space there to place a small shelf, rack or hanging. From a design point of view corner location provides some advantage, because such articulation of walls expands the possibilities of using various structural configurations and fasteners used in this case. If you compare regular and corner shelves, you can immediately notice how much more diverse and attractive the latter look. Let's try to decorate our home with such a corner shelf.

The most popular materials for making shelves are wood, furniture board, MDF, laminated chipboard and so on. Sometimes shelves are made from improvised materials - laminate, plastic or even drywall. Let's not change traditions and use furniture board as a raw material. To work you will need a jigsaw, a drill, various fasteners, a tape measure and a pencil. First you need to make a sketch of the future shelf for clarity of work processes.

The shelf will be about 70 cm high with three sections. It will be attached through vertical elements using dowel-nails, and the parts will be connected to each other with confirmations.

The first thing you need to do is mark all the parts on the plate. This is usually done with a pencil, but if the slab has a dark surface, then the pencil mark will not be noticeable; in this case, you can use a knife. You need to use the blade, without pressing too hard, to draw it along the cut line, after which a thin, white, noticeable line will appear, along which it will be easy to cut.

You can use a jigsaw to cut out shelf elements. Saw blade should have a fine tooth and be intended for woodworking. The sawing speed regulator on the jigsaw needs to be set to minimum value, and set the mode selection knob to “0”. To facilitate the assembly of the shelf, it is necessary to number the parts in the drawing, and then put the corresponding values on the structural elements themselves.

After all the parts are cut, you need to drill holes in them for connecting with confirmations. It's much easier to do this consistently. First you need to make holes in the shelf, and then drill through these holes corresponding to them in the supporting element. If there is no special drill for confirmations, then you need to use 3 conventional drills with different diameters - for the screw part, thickening and head of the Euroscrew.

Immediately at this stage you can make holes for attaching the shelf to the wall. It will be fastened with 6x80 mm dowel nails through the supporting elements. All holes must be countersunk, this is necessary so that the nail head is flush with the surface.

When all the parts have been cut, you can start decorating the edges. First, we clean all edges from dust and sawdust formed during sawing. Then apply to the ends edge tape and using a heated iron (it is advisable to take an old, unused one) glue it to open surfaces.
This type of trimming tape is produced standard width 1.8 mm, and thickness furniture board only 1.5 cm, so part of the tape remains redundant and must be removed. We cut off the excess part of the edge using a regular wallpaper knife.

We clean the resulting edge with fine-grain sandpaper. You can close the ends with any other accessible method, for example, use decorative cord, braid, special paper or cardboard.
Now you need to assemble the shelf. We assemble in accordance with the numbered diagram. To tighten the confirmations, we use a hex wrench.
Trying it on assembled structure to the place intended for it and mark the mounting points on the wall. For drilling in concrete or stone walls We use a drill with a pobedit tip. On the tip of the drill, you can pre-mark the drilling depth required for the prepared dowel. To prevent dust generated during drilling from flying around, you can glue a paper “pocket” to the wall under the work area.

After completing the drilling work, you need to insert the dowels into the holes and secure it through the corresponding elements of the shelf with screw nails, recessing the caps. This can be done with a hammer or a regular Phillips screwdriver.

You can decorate the open heads of fasteners using special plastic plugs of a suitable color.
Perhaps such a shelf will turn out to be too simple in appearance, but we made it from materials that often gather dust in our pantry or live out their days in the country. The design can be changed at your discretion, for example, the supporting elements can be made longer and then the shelves can be used as book shelves. Or choose a different outline of the end parts, in which case the shelf will acquire additional decorativeness. In any case, a hand-made item will serve as an example of the individual skill of the owners of the house.

Corner shelves save space, so this design solution is a godsend for small areas. Similar element furniture can be made independently, because this does not require special knowledge, expensive equipment and large quantity time.

Selecting material and tools for the shelf

A do-it-yourself corner shelf can be made from various materials. Consumers very often choose chipboard, MDF or plywood. Another option could be window sill profiles, as well as glass.

The choice of tools depends on the material from which you need to create a shelf with your own hands.

Yes, for wooden models worth having:

electric jigsaw;
hacksaw;
fine-tooth saw;
drill;
glue;
a rack for creating compasses and compasses with a large radius;
wooden slats for the base of the structure.

If the corner shelf will be made from a window sill profile, then it is worth purchasing the following tools:

drill;
hacksaw;
level;
self-tapping screws;
rail to enhance edge rigidity;
glue "Moment";
cable channels.

The fewest tools required when you need to make a corner glass shelf:

set of holders for glass shelves(there are already screws and dowels here);
level;
drill.

When all the materials and tools to complete the work have been collected, you can begin creating the shelves.

How to make a corner shelf?

Creating a shelf and installing it is a fairly quick process. Therefore, in a few hours (or less) you can easily transform a room, which cannot be compared with the time required to create a closet. You can make shelves correctly using step-by-step instructions.

Glass shelf

To make such a shelf, you need to follow these steps:

A shelf template is created from cardboard.
Glass cutting and processing can be done both at home and in a special workshop. But it is the professionals who will do all the work high level, and the consumer will have the opportunity to choose the most suitable material.
Holders are purchased.
Next, you need to put the shelf on one of the holders, attach it to the wall and use a pencil to mark the upper limit of its fastening.
The first holder is attached using the screws and dowels included in the kit.
The glass is inserted into the first holder, secured and put on the second. Using a level you need to level the shelf. Mark the drilling locations with a pencil.
The second holder is being attached.

This is a simple way to make glass shelves at home.

Shelf made of window sill profile

The shelf can be given any shape, but you should always remember right angle base that will be attached to the wall.

To build a shelf, follow the instructions:

The material is marked.
Using a hacksaw, the shelf is cut out.
Next, using a special strip, which matches the profile in thickness and length, the frame is strengthened. To do this, you need to place this material on Moment glue and secure it to the edge of the profile.
Holes are drilled in the already glued strip.
Self-tapping screws are driven into the wall under the holes already drilled in the shelf. A level is used during operation.
The open ends of the structure are hidden behind cable channels selected in thickness. They are placed on glue.
The shelf is fixed with self-tapping screws.

You can change the color of this design using various adhesive films selected for the interior.

Thus, an ordinary profile can easily turn into marble.

Shelf made of chipboard (plywood, MDF)

Fastening such shelves is done in several ways. The first is to attach it to the longitudinal rail-base, the second is to fix it in the grooves of the transverse base.

The first method is good because there is no need to drill either the tiles or the walls:

A shelf is cut out of chipboard. To do this, use a compass to draw a circle, divide it into 4 parts and cut each one with a jigsaw or hacksaw.
The location of the shelves and the size of the required groove are marked on the base rail. The blanks are applied to the rail, and their width is fixed.
Using a fine-toothed saw, cuts are made to the depth of the middle of the slats, and using a knife, the unnecessary element is removed.
On the shelf at the base corner, an area is outlined that needs to be cut out. In area it is equal to the depth and width of the groove in the rail.
Using a fine-toothed saw, you need to make a cut according to the markings and remove the unnecessary element.
Next, the shelves are ground and fit into the grooves is checked.
Using glue, the rail must be fixed to the wall, secured with tape and left for at least an hour.
Shelves are inserted into an already fixed rail without any other fixation.

In this simple way you can make shelving for the living room, bathroom, kitchen, etc.

To make a shelf using the second method, you must first make the grooves, and only then take on the main element:

In two bars, equal in length to the size of the sides of the shelf, using circular saw grooves of the required width are formed.
These elements are attached to the wall using self-tapping screws or dowels. It is necessary to ensure that their caps are completely recessed.
The angle is carefully measured. The measurements are transferred to the material, where the outline of the shelf is drawn.
The element is cut out using a jigsaw or file.
A special tape is used to decorate the edges.
When the shelf is completely ready, it is inserted into the grooves.

Just a few hours and beautiful element the decor is already in place!

When creating a shelf with his own hands, the master takes into account everything: his ideas, the interior, the features of the corner, where this item will be located.

We looked at what corner shelves are (in a stand-alone version).

Today we will look at how quickly and easily you can make a module of such parts.

Well, I don’t think it’s worth talking about how these very shelves are made. Their production is ordered along with cutting.

They are cut out, processed with a milling cutter, and “rolled” with plastic, 2 millimeters thick, using special equipment. In a word, it is better to make corner shelves not in makeshift conditions.

And since we are talking about how to make furniture in artisanal conditions, let’s take a better look at assembling a module with corner shelves.

So, the module itself consists of a side, a back piece and three corner shelves.

First, “by eye,” we make three holes in the end of the rear wall (just make sure that the middle one is not in the center, since there will be an axis for attaching the corner shelf).

Then, we apply it to the side of the module (in the place where there should be holes in it for connecting to it, we align their extreme ends, and with a pencil we make notches on the side part, opposite the holes made in the positioned part).

Having retreated 8 millimeters (our chipboard is 16 millimeters thick), we make holes in the side part.

As you can see, we do all the markings without a tape measure, “live.” Moreover, in this case, we obtain fairly good accuracy (hole alignment).

After that, we connect it to the back wall.

But here you need to be careful.

If you make two perpendicular holes close to each other (near the corner of the shelf), then when attaching the shelf (when confirmats are screwed into it), these confirmats may intersect. Therefore, by attaching the confirmation sheet opposite the hole made, we determine (visually) the position of the perpendicular hole.

After this, again, we attach shelves to each of the joining faces (side and back wall), and mark the position of the holes.

When the holes are made in the side part and in the back wall, we attach the shelf. When fixing the shelf, you need to press it towards the joining surface in order to remove possible gaps between them.