Remaking a Soviet wall with your own hands. Competent and original refurbishment of old furniture

Many owners of old, good furniture, which has been used for its intended purpose for many years, and unfortunately now needs restoration, do not know how to correctly carry out this procedure without significant costs. Often, families with pets or small children also face the problem of damage to the upholstery or frame of new furniture. In this article, we will try in more detail on several clear examples consider step by step process restoration of old and damaged furniture.

Example 1. Restoration of a sofa

Restoring the upholstery of a corner sofa.

Tools used:

wire cutters;
round nose pliers;
screwdriver;
staple remover

Stage 1.

Visual inspection of the condition of the cladding and load-bearing frame sofa

Stage 2.

Remove the sofa upholstery. To do this, first remove the legs using a screwdriver. After this, using a special staple remover, starting from the corner and moving along the perimeter, we remove the mounting clips.

Stage 3.

We check the condition of the plywood, chipboard, and other elements of the load-bearing frame of the sofa. This example shows that the core is in excellent condition and does not need to be replaced.

Stage 4.

After assessing the condition of the frame, we remove the old covers, use their sample to make a pattern and sew new covers for the sofa.

Stage 5.

We replaced the old sagging foam rubber and padding polyester with a new one. After that, we move on to upholstering the sofa with new fabric. With help special tool fix with staples new upholstery along the perimeter.

The final stage.

Installation decorative overlays and the legs of the sofa to their installation places.

The new sofa is ready for use.

Example 2. Making a bench and table from an old cabinet

Tool used:

screwdriver or screwdriver;
electric jigsaw;
ruler;
yardstick;
marker or pencil;
wood screws.

Stage 1.

We remove the curtains with doors using a screwdriver or screwdriver.

Stage 2.

For the future table, we measure the dimensions on the old cabinet. In this example, a distance of 80 cm is selected for the table.

Stage 3.

According to the line marked on the side walls and the back wall, we cut using a jigsaw. Thus, we get two absolutely equal halves of the cabinet.

Stage 4.

Using the remaining scraps and shelves, we connect the two parts of the sawn cabinet. To do this you will need wood screws and a screwdriver.

Stage 5.

In order for the table not to look so massive, we will make beautiful curly legs. To do this, we make indents from the top and bottom of the side legs of the future table and draw an arc. We cut out the decal along these lines using a jigsaw, which will be used as a stencil for the second side.

Then we turn the table over to the other side and make a similar cutout for the stencil on both sides of the legs. As you can see, the restoration and decoration of old furniture requires an original approach. Thanks to this author's approach, we have created a stylish modern table.

Stage 6.

A finished new table requires chairs or a bench. It was for these purposes that the cabinet doors, removed in advance, were preserved. We lay three doors side by side and remove the old hinges. We mark the first door in half, which will subsequently serve as legs for the bench.

Stage 7.

To ensure the stability of the future bench, we make a cutout on the legs, which we mark using a regular bucket, as shown in the figure below. Then, using a jigsaw, we cut out a semicircle on each leg.

Stage 8.

To make the structure of the bench rigid, we connect the two legs with a special strap.

We use the third door from the cabinet for the base of the bench, which is fixed with self-tapping screws. In order to eliminate irregularities and burrs, you should make a sub-mold for the screws. The table and bench are ready.

Example 3. Restoration of an old cabinet

Tool used:

Sandpaper;
safety glasses and respirator;
screwdriver or screwdriver;
brush and paint.

Stage 1.

We clean the entire surface of the cabinet from old varnish. To do this, you can use regular sandpaper with coarse grit. The surface must be cleaned down to the wood layer. To prevent dust from getting into your lungs and eyes, we use safety glasses and a respirator.

Stage 2.

Using fine sandpaper, we process the surface of the cabinet so that it is perfectly smooth or has

Stage 3.

Using a damp cloth, wipe the entire surface of the cabinet from dust.

Stage 4.

Painting. It is best to use enamel paint that has glossy color. For this example, glossy black enamel was chosen. It is best to apply paint evenly with a medium brush. thin layer no leaks. Once the first coat of paint is applied, allow the cabinet to dry for 24 hours. After this, a second layer of paint is applied so that there are no gaps.

Now the restored cabinet is ready for use.

Example 4. Restoration of old chairs

Tool used:

screwdriver or screwdriver;
staple gun and staples or hammer and small nails;

Stage 1.

Using a screwdriver, unscrew the seat.

Stage 2.

We take the selected new upholstery for the chair, prepared in advance according to size, and spread it outer side to the top. In the center of the new upholstery we place a seat with old upholstery. Using a staple gun, attach the new upholstery to the center of the seat (mark it). A mark should be made on each side of the seat.

Stage 3.

By stretching the fabric, moving away from the center, we begin to fix the new upholstery to the seat with staples. To securely fix the fabric at the corners, it is best to use several staples.

The final stage.

Using zigzag scissors, trim the excess ends of the new upholstery.

We install the seat with the new upholstery in place and fix it using the previously unscrewed screws.

New chairs are ready for use.

Example 5. Restoration of an old chair

Tools used:

Sander;
three sets of sandpaper;
staple gun;
screwdriver or screwdriver.
respirator and safety glasses.
new upholstery.

Stage 1.

Using a screwdriver or screwdriver, we will disassemble the old chair into its component parts.

Many people have old furniture stored at home or somewhere in the country. And most often these are not expensive antiques from tsarist times, but the most ordinary cabinets, chests of drawers, tables and chairs. At first glance, it may seem that most of these things are high time to throw away, but take a closer look - often these are high-quality products made of solid wood or maybe even forged metal, which will last for many more years if they are beautifully restored. In this article we will talk about ways to decorate tables - kitchen, dining, coffee, work - of different sizes and shapes.

However, many of the presented options are equally suitable for other interior items. Perhaps these examples will inspire you to turn nondescript, shabby furniture into a real work of art, because it’s so nice to contemplate the beauty made by yourself!

12 ways to give new life to an old table

1. Painting

The best way to update a worn-out table is to paint it, but first you need to prepare the surface. A paint remover will help remove the previous finish from the product.

If there is rust on metal legs or fittings, it should be soaked generously with vinegar, Coca-Cola or special means, and after 15-20 minutes wipe with a hard scraper.

The wood is sanded sandpaper, remove the dust, then soak it with an antiseptic and apply a primer. All chips, cracks and irregularities are rubbed over with acrylic wood putty.

For painting, you can use alkyd enamel, acrylic or epoxy paints, varnishes, and aerosol compositions for metal. Will also be required painting tools- brush, roller, sponge, sprayer.

To give the table a more impressive look, you can paint it not entirely, but only individual parts. For this you will need masking tape or stencils.

2. Artistic painting

If a monochromatic coating seems too boring, try decorating old table patterns. Drawings can be applied with a brush and acrylic paints - manually, through a stencil or according to outlines made using tracing paper.

A table with artistic painting will perfectly complement the interior in ethnic or rustic style, and children will like images of animals, fairy-tale and cartoon characters.

3. Decoupage

For this decor you will need a brush, paper napkins with a pattern, PVA glue and transparent furniture varnish.

The pictures are carefully torn off or cut out with scissors, the bottom layers of paper are removed, then the resulting thin appliqués are placed in the designated place and coated with glue on top, trying to avoid folds and tears.

If any element cannot be attached the first time, it must be immediately wiped with a sponge dampened warm water, and try again with a similar fragment.

Dried decoupage is coated with transparent furniture varnish in several layers, otherwise the paper decor will quickly be erased.

4. Craquelure

Craquelure is a cracking varnish that is used to deliberately give a product a look that imitates the texture of antique paintings. It can be one-step (the composition is applied in one layer and cracks as it dries) and two-step (two mixtures are used - one based on epoxy resins, the second on water based, they interact and a characteristic texture is obtained). The color of the veins is determined by the bottom layer acrylic paint, as well as the shade of the grout. Most often, powdered golden pigment or pastel is used for this purpose.

Two-step craquelure is usually used to complement decoupage or hand painting to achieve the effect of an aged painting. One-step is more suitable for products without patterns.

5. Tiles

It happens that after repair there is a small supply left ceramic tiles. It can be used to decorate an old table - just tile it wooden base. The installation technology in this case is practically no different from finishing walls or floors.

The ceramic surface is ideal for a table in the kitchen, terrace, veranda, gazebo or even outside.

To give the table an attractive look, in addition to plain tiles, you should use patterned borders, decorative panels(possibly even with some plots) or a stylish patchwork.

6. Mosaic

Paintings from small fragments decorate many galleries, temples and palaces. They will look just as elegant in the home, for example, on the surface of coffee tables.

Mosaic elements can be ceramic (even broken tiles will do), glass or acrylic.

From available materials, small round cuts of wood, cut CDs, and colored pebbles are suitable. You just need to come up with an interesting pattern and attach the pieces to the table using glue or liquid nails.

7. Self-adhesive film

The simplest and nice option decor of an old table that does not require fiddling with paints - gluing film.

This available material can imitate any coating - from rare wood to marble, it can have any designs, patterns and textures.

Self-adhesive film is sold in rolls, and it is easy and pleasant to use.

8. Decorative tape

In stationery and creative supply stores in Lately There is a wide selection of decorative self-adhesive tapes. It will take you no more than 30-40 minutes to decorate an old table with multi-colored tape and a new bright thing will appear in the interior.

If you want to change the finish, the adhesive strips can be removed just as quickly, and if there is any glue left somewhere, acetone will easily dissolve it.

9. Epoxy resin

Epoxy resin is a liquid substance that hardens quickly on outdoors, turning into hard transparent plastic.

Cracks in wood filled in this way look very unusual, and if luminescent powder is added to the liquid phase, they will glow brightly in the dark.

also in epoxy resin You can place dried flowers, leaves, shells, coins, and thanks to the transparency of the substance, you get the effect of ice or amber.

What can you make from an old wardrobe? There is no need to rush to throw it away or give it away. Let's take a closer look at some options with cabinet use ideas.

Desktop

From the walls of the closet you can construct a desk for children. And use the shelves to make closed drawers for the table. Then carefully connect everything and clean it with sandpaper. Next, apply several layers of wood varnish.

Important! Let the first coat of varnish dry thoroughly before applying the second.

Cabinet

Make a versatile bedside table out of an old closet. A new piece of furniture like this will always come in handy. After all, you can put in it any accessories that will always be at hand. Drawings with patterns will add originality to the cabinet. To make the cabinet look more comfortable, place it on top flower plant in a pot.

Taping or painting the cabinet

Update old wardrobe and giving it a second life is very simple. The main thing is to choose the right material for gluing. Self-adhesive wallpaper will do.

Reference! Before gluing, you need to temporarily unscrew the handles on the cabinet, then you will get an amazing effect.

If you decide to paint a part, then select a varnish or special paint to match the color of your apartment interior. The assortment in hardware stores has a wide selection for every color and taste.

Important! The style is given by two types of painting. Recommended, for example, in the form of black and white, etc.

Shelf in the garage

Depending on the size of the old cabinet, you can make your own shelf of any size for the garage. Since the garage almost always has a lot of different tools scattered in the corners, a shelf is needed for them. Assembling the shelf takes less than an hour.

Sideboard

The sideboard is made in several stages:

Make an ordinary rectangular bedside table and screw the light rear half of the cabinet to the back on both sides. And for greater beauty, add a mirror with holders along the edges of the outline.
In a cabinet with inside attach two slats for the shelves.

Floor stand for flowers

The stand can be made of any shape. The ideal option is in the form of a square pyramid. Much more can fit on this stand. flower pots. Geometric shapes fashion trend of the 21st century. Originality without repetition. It is unlikely that you will be able to find and purchase such a stand in a store.

Important! The bottom square should be stronger and more stable, because the main weight of the flower pots and pyramidal subsequent structures will press on the bottom.

Potato box

Most quick way Making such a box from an old cabinet is suitable for storing large amounts of potatoes. Simply place the cabinet on the back wall, open the door and add the potatoes. If you need a much smaller size, then disassemble the old cabinet and assemble a regular box from the walls. To add beauty, you can design a lid with a lock or latch.

Soft ottomans for the hallway

Remove the shelves and connect them together to make a square. Place foam rubber on the top part and cover it with fabric. The walls of the ottoman can be painted in any suitable color.

No need to buy at all new furniture to make your home more modern and functional. Take an example from this inventive guy who was able to turn old, worn-out pieces of furniture into wonderful things! It's not often that you see such useful and nice interior elements…

How to repurpose furniture from old to new

Preparation

When children outgrow their crib, it is time for them to start reading and writing. Make it out of a crib desk- a brilliant solution!
The crib can also be transformed into a special crib for a variety of children's activities.
Great example bathroom decoration.
Incredible adventures TV.
It is not clear how and why this guy ended up with carts from the store at home. But they made great chairs!
Wow! Second Life regular wall. It turned out great!
Kitchen chairs can get so cute garden bench.
Great example modern sofa. Yes, your eyes don’t deceive you, it’s made just like that.
Organizer for many household items. It's really very easy to make!
It turned out wonderful.
Old post office the box could be like this original decoration interior Incredibly romantic!
Ideas to use old pianos. If the instrument cannot be repaired, you can create such a beautifully organized space.
Bicycle in the bathroom- very stylish and convenient stand for different things. A decorative bicycle, just think!
Here's how to adapt.
Ottoman from old magazines! I'll definitely make one like this.