Chainsaw sawmill. How to make a homemade mini sawmill from a chainsaw with your own hands Mini sawmill from a chainsaw with your own hands drawings

The construction of any country private home is impossible without intensive wood processing. Do-it-yourself sawmill using a chainsaw is the most effective tool for such work, allowing significant savings in both labor costs and time. Not everyone can afford to purchase such a factory-produced tool, so making it yourself can be a real way out out of position. from a chainsaw, if done correctly, will not be inferior in efficiency to factory-produced samples. At the same time, its design is quite simple; almost anyone who is at least somewhat familiar with manual labor can make it with their own hands. In any case, a person who undertakes the construction of a house on his own can easily solve the problem of how to make a sawmill from a chainsaw.

Sawmill with a vertical chainsaw

First you need to find a straight piece of metal channel or pipe rectangular section. These will make a base, the length of which depends on what kind of logs will be sawed at this sawmill. Round wood is being sold standard sizes 2, 4 and 6 m. In this case, the channel section plays the role of a guide along which a special frame with a chainsaw attached to it moves. To make it, you need to take two pieces of steel angle with a side of 5 cm, having a length of 40 cm. Perpendicularly located rectangular plates with a thickness of 3-4 mm and a length not less than the width of the guide are welded or bolted to them on both sides.

So that a chainsaw sawmill can cut boards various thicknesses, it is necessary to ensure the ability to move the chainsaw not only in the vertical, but also in the horizontal plane. To do this, two small sections of the same angle are welded on top to the sections of the corner, in which holes are drilled, located coaxially. A steel rod with a thickness of at least 10 mm is threaded through them, to the end of which a metal frame in the shape of the letter “P” is attached. A chainsaw is installed on it. Through the holes the axis passes through the segment metal pipe larger diameter, in which 2 threaded holes are drilled. M8 bolts are screwed into them, which can fix the axle in a certain position. This will allow you to vary the thickness of the resulting boards.

Before starting work, the guide is attached directly to the surface of the log using self-tapping screws. The heads of the screws must be recessed into special secret recesses so as not to interfere with the movement of the movable frame. The thickness of the future board varies with the help of the movement of the axis and locking bolts, which adjust the position of the saw bar. After this, you can turn on the chainsaw and start sawing the log.

Return to contents

How to make a horizontal sawmill from a chainsaw

Making a sawmill with a horizontal sawing bar from a chainsaw with your own hands, if it is more difficult, is not much more difficult. As the basis of the structure, you need to build a frame of two metal profiles measuring 7x7 or 7x8 cm, which are fastened with pieces of corner of approximately the same size. It can be either welded or fastened with bolts, the heads of which should be directed into the structure. Moreover, the length of such a frame should be approximately 0.5 m greater than the length of the log that this homemade sawmill will process. This excess is necessary so that the saw can freely approach the end of the wooden workpiece.

The movable block is made from a steel corner 5x5 cm, having a length of 1 m. Holes are drilled at its opposite ends into which two steel rods 1 cm thick, covered with threads, are inserted. Each of them is secured on both sides of the hole with two nuts. A 2 mm thick steel plate is attached to one of them, on which the chainsaw is mounted. The opposite end of the saw bar is threaded onto a second rod using a wooden spacer and secured with nuts and washers. This design helps maintain the aligned position of the saw bar even with significant pressure on it.

With a horizontal saw arrangement, it is also possible in a mobile version. This mini sawmill has a frame made of corners in the shape of the letter “F”. Another frame in the form of an inverted letter “P” is welded to its long end at a right angle, into which the chainsaw is inserted. The main frame is placed directly on the surface of the log, the entire mini sawmill moves along its axis. The main disadvantage of this design is the need to pre-level the surface of the workpiece so that the frame can move unhindered.

If the sawmill is intended only for personal consumption, it is more cost-effective to do it this way.

Wood is the most common and sought-after material in the construction business. Before construction begins, the wood is cut at a sawmill and processed. Purchasing equipment for your sawmill is expensive, but if you make a sawmill from a chainsaw with your own hands, you can save a lot.

Varieties of homemade chainsaw sawmills

The tool is divided into two types: stationary (movable, fixed) and mobile.

Stationary

The operating principle of the stationary machine is simple. In it, the workpiece moves towards the cutting part, while the machine stands still. The device makes straight cuts High Quality. The machine can use a workpiece of any length. A stationary chainsaw sawmill has a complex log feeding mechanism, so manufacturing difficulties may arise. It is easier to work with a moving machine. The workpiece is stationary, and the saw moves towards it. The disadvantage of the tool is that blanks of exact length are used here.

Mobile

In contrast to the stationary model, the cutting quality of a mobile sawmill is much lower. The machine has a simple design, since the workpiece acts as a guide. Here the knife moves towards the log. This is a manual model that can be carried, so it is widely used in forestry - right in the logging area, the log is cut into boards. The disadvantage of the machine is that the movement of the workpiece must be regularly monitored and aligned.

What do we need

To make a sawmill based on a chainsaw, you will need the following parts:

• electric saw or chainsaw;
• welding machine;
• two channels 8 m long, their height must be at least 150 mm - the entire load will fall on these parts;
• screws, nails, bearings;
• for large volumes you will need extended tires with chains;
• material for the body, most often metal is used for this, because it is a strong material that can withstand heavy loads of logs and tolerate temperature changes well; if wood was chosen as the material, it should be carefully secured with screws and self-tapping screws;
• water pipes 25 cm long - they are used as ties;
• pipes with a diameter of 35 to 40 mm;
• cord or cable;
• corners and calm (50×100, 40×40 mm);
• smooth guides and rollers.

Some parts may develop rust if exposed to water. Therefore, it is not recommended to install the instrument outdoors.

How to make a sawmill from a chainsaw - step-by-step instructions with drawings

To make it correctly homemade sawmill from a chainsaw at home, drawings are required. Prepare the drawings yourself or use ready-made ones. They indicate the main dimensions of the structure and the location of all parts. The installation location is selected depending on the dimensions of the machine. Since its dimensions can be different, the machine can be placed in any room. The main condition is that the premises must have good ventilation system. If you stick to step by step instructions, then it will be easy to make a sawmill from a chainsaw with your own hands:

1. The base is assembled according to the design diagram. It consists of angles and inverted rails. The base and the sawmill are placed parallel to each other. The rails and angles are leveled using a level and connected by welding.
2. Holes with a diameter of about 14 mm are made in the base. A distance of 1 m is left between the holes. Drills made of carbide material with a complex cutting edge are used. If such parts are not available, then the hole is drilled with a small diameter drill, replacing it with a larger diameter drill.
3. After this, install the ties and secure them with bolts.
4. Then the base needs to be installed on the racks. The racks are made of steel angles. A gap of 100 cm is left between the posts and the base. The parts are fixed by welding.
5. To make the structure more rigid, braces are welded between the posts.
6. The cutting part is installed on a movable cart. The cart is made from corners. The design of the trolley is created depending on the saw model. Corners 40x40 mm are welded to the bottom of the slab. Rollers and bearings are installed on these corners. To fix the saw, 2 more corners are welded on top of the plate. The strength of the fastenings determines the level of effort applied when processing wood. The stronger they are, the easier it is to work with the device.
7. When processing wood, you need to pay attention to securing the logs. During operation, the wood piece is subjected to heavy loads. Because of this, it moves a little to the side. To fix it, movable hoses and pipes are installed. The tool is ready, you can start working.

You can make a mini sawmill from a tire. All parts of the device are mounted on a frame, so its dimensions are chosen depending on needs. The tool operates on a gasoline or three-phase engine.

The three-phase motor is powered by a 380 V network. Hardware is selected according to the size of the workpiece.

To reduce the amount of waste, you need to minimize the thickness of the cut.

To do this, the tire is purchased together with the chain. The size of a standard tire is 50 cm. The tire and frame are connected, and guides are installed on the base. Holes are made on the plates and welded to the base. The base is then secured with nuts and bolts to the posts.

Approximate price

Making a homemade sawmill from a chainsaw is cheaper than buying it finished equipment. To make a sawmill yourself, you will need from 5,000 to 15,000 rubles. This amount includes.

For many centuries, timber has been the most popular raw material for housing construction. Today, primitive processing methods have been replaced by modern equipment. For example, to cut timber and process it to the required size, craftsmen use a sawmill. The disadvantage of such a machine is the cost. For this reason, many people make mini sawmills based on chainsaws.

Preparatory work

Before you start creating such a unit, you need to consider a few points:

• what diameter do you plan to cut the workpieces? With significant dimensions, you need a powerful saw with a long bar and chain
• Will you be loading heavy logs for cutting? This requires a certain mechanism, ideal option is a forklift
• the workpiece must be firmly fixed so that the boards are even
• electric saws allow you to significantly save on cutting
• Masters advise using a 3*8 carbide chain. A normal target will quickly break
• take into account the longest and shortest lengths of the workpieces. The longest ones should fit, and the shortest ones should not fall between the guides
• The workpieces can be cut using both the upper and lower parts of the tire. It is preferable to use the upper part, because it throws sawdust away from the chainsaw, which makes it possible to increase the service life of the saw

Chainsaw sawmill, video

For the timber harvesting process, you can use a powerful chain or band saw:

• chain option will do for sawing round workpieces. The design of such a unit contains a saw chain. At the end of its work, a lot of sawdust remains, which is the main disadvantage of the sawmill type ego
• The tape version can cut quite large workpieces. When working on this sawmill, keep in mind that sawdust flies around it for a long distance, for this reason you need to be careful.

Many people today are interested in the question: how to make a sawmill from a chainsaw? A chainsaw sawmill, the drawings of which are presented in this article, is an excellent unit for household use.

Before making a sawmill, you need to prepare a base, for which you can use rails and 50x100 mm corners turned upside down. They are mounted strictly parallel to the floor, for this reason it is worth purchasing building level. It is extremely important to use a level, and not to navigate along the plane, in order to completely eliminate free play, which can cause injury. It is necessary to carefully secure the base so that there is no displacement in the housing, and vibrations are also damped.

The base can be installed on a concrete floor, soil, or foundation.

Work order:

• in length along the base it is necessary to drill holes every 1-1.5 meters with a cross-section from 14 to 16 mm
• Based on the number of holes, the ties that need to be connected using bolts are selected
• metal squares are racks on which the base is mounted. The gap from the outer stand to the base should be approximately 100 cm
• To enhance the rigidity of the structure, it is worth welding braces in the gaps of the racks.

Upon completion of installation of the base, you need to make a mobile cart. You need to weld a 4x4 cm corner to the bottom of the steel plate and place the structure on rollers or bearings. On the top part you need to weld two corners on which the chainsaw will be installed. After this, you need to create a system that will fix the workpiece. For this purpose, movable hoses and pipes are located at a certain height and fixed.

After this, the first option will be ready for use. However, you can create a sawmill in another way. The tools and drawing will be the same, but the device itself will be slightly different.

Chainsaw having a worker power unit and cutting teeth are already present, you need to create both mechanisms and a structure for fastening the workpieces.

First of all, we will make a mechanism that will regulate the thickness of the boards. The workpiece is cut by raising and lowering the base, which is welded to the plate with four nuts having bent edges. Lock nuts must be mounted on top of the entire structure, tightened after the device is adjusted to the required thickness of the processed timber.

Saw in homemade machine moves along the frame along the guide angles. The gap between the corners should not exceed 50 cm. Two 20 mm rollers or bearings are welded to the posts. The roller located at the bottom will keep our machine from lifting, and the roller located at the top should rest on the guide angle.

The best option would be to mount the workpieces on two ridges, one of which is fixed and moves with a screw. After laying the workpiece, the moving ridge is fixed with screws to ensure complete immobility. After this, you can start working on a homemade machine.

When choosing a place to install the machine, do not forget about ventilation and means personal protection while cutting at such a sawmill.

Rules for working on a DIY sawmill

Upon completion of installation of the sawmill, it is necessary to check for stability and level matching. This issue must be approached very carefully so as not to run into problems later.

If the test is successful, you can fasten the workpiece on the base created for this purpose. This must also be done by level. After this, tightly clamp the log into a vice or other clamps provided.

After securing the workpiece, you need to start the resulting sawmill and slowly bring it to the log. Next, you need to make a test cut and measure the correctness and accuracy of the cut.

In this work, it is extremely important to follow all safety rules and be sure to use personal protective equipment to prevent injuries. When working with a sawmill, it is mandatory to have glasses, arm guards, a robe or apron, and, of course, mittens.

» How to make a sawmill from a chainsaw with your own hands, quickly and easily

Today, it is almost impossible to buy a stationary sawmill for your home, as it costs incredible amounts of money. However, when you need to cut wood or process it, there is only one option left - a DIY chainsaw sawmill. Certainly, homemade instrument It’s still a long way from the factory equivalent, but for a home this design will be enough. Not many people know how to make it at home, so it’s time to delve deeper into this issue.

What is a chainsaw sawmill?

To find out how to quickly and easily make a sawmill from a chainsaw, you first need to understand what the device is. A sawmill is a unit that serves to process workpieces in the form of logs. The processing process includes sawing logs into boards and making beams. The factory device is large, hence the high price of such equipment.

In order not to buy a factory-type sawmill, in which the drive mechanism is a powerful electric motor that is powered by a voltage of 380V, there is a good alternative - this is a unit using a chainsaw. Moreover, you can use not only a chainsaw, but also an electric saw. Structurally, the sawmill layout will be identical. In addition to chain saws, you can also make a sawmill from band saw. The difference in their application is as follows:

1. If you make a sawmill with your own hands from a chainsaw, then such equipment allows you to cut round timber. The base of such a unit includes saw chain, the main disadvantage of which is the formation of a large amount of sawdust. In addition, when sawing wood longitudinally, not only powerful tools are required, but also appropriate chain strength, for example, with pobedit or diamond coating, which help extend the life of the attachment
2. Mobile band sawmill used for cutting logs large diameters. However, the use of such units also has its disadvantages, such as the spread of sawdust onto large area from the place of processing. This drawback can be easily eliminated if connected to a chip separator flexible duct. The main advantage of belt units is that the cut is thin, and therefore a small amount of chips is released

The photo below shows both options for sawmills using a chainsaw and strip fabric which were made by hand.

This is what it looks like simplest design of the unit in question, which is based on a saw with a chain cutting mechanism.

If the first option is considered mobile, then the second is stationary, and also requires high production costs. If the goal is to quickly and easily make a sawmill from improvised means using a chainsaw, then we will consider in detail how to implement the idea step by step.

This is interesting! A power saw can also be used as a powered cutting tool for sawing logs. Only one of the main disadvantages of electric saws is their low power, so the tool will not be able to cope with serious workpieces.

Why do you need a sawmill from a chainsaw on the farm?

With the onset of autumn, the sounds of gas and electric saws begin to be heard more and more often. This means that the firewood harvesting season is in full swing. However, for what purpose might a sawmill be needed when a mobile gas-powered tool does an excellent job of preparing firewood? It is easier to cut firewood when a longitudinal cut is made using a chainsaw, but when it becomes necessary to cut the logs into boards, you cannot do without a sawmill for these purposes.

The word sawmill itself means “saw” on a “frame”. Structurally, this is a machine on which it is mounted cutting tool(in this particular case, it is a chainsaw or electric saw). When firewood is being prepared for the winter, one often comes across straight trunks, from which, as they say, it would be a sin not to make boards. Another option is when you live in a rural area and want to do business with minimal investment(open the sawmill). A chainsaw will also come to the rescue here, from which you can make a sawmill with your own hands. With this machine you can perform the following manipulations:

1. Saw logs into boards, which can later be sold or used to build a house, cottage or other outbuildings. Boards are always in demand and expensive building materials
2. Manufacturing beams, which are also expensive construction view building material, which can be obtained if you have a forest and a sawmill

During work, lumber remains that can be used as firewood for lighting solid fuel boilers. A mobile sawmill made from a chainsaw has the following advantages:

• It does not take up much space on the site, so there is no need to construct an additional ceiling for it
• It can be disassembled at any time to continue sawing trees.
• Can be used both at home and in field conditions, for example, in the forest immediately after felling trees

However, portable models of chainsaw sawmills have all these advantages. If you plan to make a sawmill in the form of a machine, then it is not so easy to move it, so you can use it only in one place where it will be installed.

How to make a sawmill from a chainsaw

If you need a mini sawmill made from a chainsaw, then everything is simple here. Required to take metal corners, and weld the corresponding structure. In this case, you only need to first prepare a drawing on which to plan the design of the final equipment.

The second option is when you need a home sawmill, the manufacture of which will require:

1. A chainsaw that is used as a powered cutting source
2. Mechanism for moving workpieces. This will eliminate the need for the sawyer to move around the workpiece, which is unsafe
3. A device for fixing workpieces in the equipment structure. It is necessary to fix the workpiece in order to prevent it from turning when exposed to the cutting tool. If you do not secure the log, it will rotate, which will reduce not only labor productivity, but also end up with a sloppy workpiece in the form of a board.

Having an idea of ​​what it is homemade version device, you can begin to implement it. Here it should immediately be noted that it is possible to make a sawmill of any complexity, which, as they say, is “very handy.” However, the goal of this material is to show how to make the simplest sawmill using a chainsaw.

This is interesting! The main rule when making a homemade sawmill from a chainsaw is to provide a mechanism for adjusting the thickness of the resulting boards. This action is realized due to the frame to which the tool is attached, as well as adjusting screws.

Drawings of a sawmill using a chainsaw photo

Before studying the manufacturing process of the device in question, it is recommended to first make a drawing or diagram. To do this, you will need to initially decide what type of device is needed - mobile or portable, as well as home or stationary. Below are several types of sawmill manufacturing schemes that are easy to make at home.

This is the simplest option for making a mobile machine for making boards of different thicknesses.

If the first drawing of a chainsaw sawmill involves the sawyer moving the tool itself along the workpiece, then the second option is more versatile and practical. The tool is mounted on a movable frame, and the workpiece is placed on a flat surface. After this it is set required thickness future boards or beams, which is done by raising up or lowering down a tool fixed on threaded slots.

The third option for a sawmill with a chainsaw as a cutting tool is a stationary machine. Making it is much more difficult than the first two, but it greatly simplifies the master’s work. All that is needed from the master cutting at the sawmill is to push the workpiece towards the rotating chain of the chainsaw. Using levers, the required thickness for the boards, which are obtained from the sawn log, is set.

Do-it-yourself chainsaw sawmill, instructions with photos

A homemade sawmill from a chainsaw is an opportunity to save a lot on the purchase of boards that will be needed when performing any construction work. Let's consider several options on how to quickly and easily make a sawmill from a chainsaw with minimal financial and physical costs.

Option for making a simple sawmill based on a chainsaw

The first version of a homemade sawmill is quite simple, so anyone can implement it, spending no more than a couple of hours on it. To implement this method you don’t even need a welding machine, so let’s get started. Initially, we prepare the necessary materials:

• Hollow steel beams measuring 5x5 cm and 1 meter long. The number of such bars is 6 meters (it all depends on the length of the tool tire)
• Connecting elements in the form of fastening bolts with a diameter of 8-10 mm in the amount of 10 pieces

When all the components for manufacturing the device are ready, you can begin.

1. First you need to make a lattice base from steel bars
2. The size of the base is equal to the length of the tool bar
3. This base is a guide when sawing logs
4. To secure the tool and adjust it, two bars are fixed perpendicular to the base
5. At the ends of the bars that are attached to the base, you need to make clamps to secure the chainsaw bar with eyes through which the chain will move freely

As a result, we get a device the following type, as shown in the photo below.

Specifically for the manufacture of this sawmill, a welding machine was used, due to which costs were reduced connecting elements. However, it can be done without welding, but using a drill. You can decide for yourself which is better, but in the end we get an expansion of the functionality of a useful tool in the household - a chainsaw. How this type of sawing equipment is made is described in detail in the video.

The second option is how to make a sawmill with a chainsaw

Another simple option on how to make a sawmill for your chainsaw, which involves the use of the following consumables:

1. A channel measuring 10 by 5 and at least 5 meters long. Length affects the size of the logs to be cut. How larger size logs, the length of the channel must be appropriate
2. Steel corner size 5x5 cm
3. Steel tube up to 1 meter and diameter 15-20 mm
4. Fasteners in the form of bolts and nuts

The principle of manufacturing the second version of the sawmill is that the channel is a guide for the movement of the tool. A corner is used as movable rollers, which is located on the upper part of the channel. A tube is attached to the corners, which are rigidly connected to each other, and a chainsaw is fixed to it.

The photo shows what it looks like ready product for sawing logs. How to use it is as simple as making it. Place on the top of the workpiece, measure right size boards (thickness of the final product), start the unit and walk along the log from start to finish. The decisive role is played by the time that must be taken to correctly align the tool, but this disadvantage is compensated by the simplicity of the unit’s design.

The third option is to make a homemade sawmill from a chainsaw

Making a mobile sawmill from a chainsaw is not difficult and not expensive, unlike a stationary device. However, they have a big drawback - the need to hold the tool in your hands or move it almost manually. Therefore, we will consider another option for making a sawmill from a chainsaw with your own hands, which is one of the most versatile.

The photo shows a model of such a device, which anyone can make. The design, although simple, requires a lot of effort to manufacture. It’s easy to use, for which you first need to place the log on a flat surface, roll the machine to the workpiece, set the thickness of the cut, and get started. The machine moves along the workpiece, sawing boards of the required size.

This is interesting! This type homemade device is something between mobile and compact chainsaw sawmills and stationary units, in which the tool is mounted on a movable base and moves along guide rails.

What kind of homemade products there are and how to make them, you now have an idea, so you can start implementing them. These are the simplest, lightest and most inexpensive chainsaw sawmills that anyone can make.

Varieties of homemade chainsaw sawmills

There are so many inventions, so many people, so we’ll take a sightseeing tour of different types homemade sawmills, and find out the design and application features.

The first version of the device, which is shown in the photo, is suitable for cases when it is necessary to cut not one or two logs, but several dozen. The convenience of using such a unit is that the workpiece is placed on the base, fixed, and after that the cutting tool moves along the rail track. A special arch-shaped structure on which the tool is mounted moves along rails. To set the cutting thickness of the boards, the arch design provides for adjustment of the position of the tool.

Simplified version of the first option. The simplicity of manufacturing this model lies in the fact that instead of channels, a steel angle is used, from which the base is made. A manufactured arch moves along the inside of the corner, on which the tool is fixed. The corners are connected by longitudinal plates on which the workpiece is located. A simplified version of a stationary sawmill made from a chainsaw allows you to not only quickly make it yourself, but also save on materials.

The third option for a stationary sawmill can also be made independently at home, but this will require a lot of consumables. The principle of operation of such a unit is that the gas-powered tool is fixed on a special movable frame. The bed is mixed manually by a sawyer along the outer part of the channel. To set the required thickness of the boards to be cut, the channel is raised or lowered thanks to a special mechanism.

How to properly saw boards on a homemade sawmill

If the master has mastered the production of a homemade product, then figuring out how it works will not be difficult. However, when sawing you need not only skills and abilities, but also compliance with safety precautions. In addition, you cannot operate a chainsaw without protective equipment, which includes goggles, a helmet with headphones, gloves, special overalls and boots with an iron toe. The instructions for first starting up and working on a sawmill using a chainsaw are as follows:

1. First you need to check the installation. All connections must be secure and the tool must be firmly attached to the frame
2. Before securing the tool to the stand, make sure that the gas tank and oil tank have sufficient quantity fuel. Tanks must be full as the tool is operated at a 90 degree angle
3. After firmly securing the tool, you need to start fixing the log. Even if a mobile installation is used, the log must be securely fastened so that during the process of exposure to the tool, it does not move or vibrate
4. The required cutting thickness of the boards is set
5. The chainsaw starts only after it is secured to the stand. After this, you need to slowly bring it to the workpiece
6. Lock the chainsaw trigger at a speed above average and start cutting. When sawing you need to be careful, as impacts cannot be ruled out.
7. You need to move the chainsaw slowly so that the tool works at half the load.

The result of making your own sawmill from a chainsaw

If you set a goal to build a mini sawmill for your home, then you need to start first by making a homemade diagram. Based on the diagram, you can begin to implement the idea into reality. Making a mobile machine for sawing boards is not difficult, and every craftsman can handle it. To do this you need to have on hand necessary tool in the form of a grinder, drill and welding machine, Consumables in the form of fasteners, handles and screws, rollers, as well as main parts - angles, channels, tubes.

Then it's a matter of time and skill. When working at a sawmill, you need to take into account the following: in the design of a chainsaw it is better to use chains made of carbide materials with pobedit or diamond coating on the teeth. This will extend the life of the chains and also eliminate excess stress on the tool when the teeth on conventional chains become dull. It is not recommended to cut logs when low temperatures, since frozen workpieces will dull the teeth of power tools even faster. Having a chainsaw on your farm, you should not limit yourself to its basic functionality, since this tool is capable of performing many useful work, replacing such expensive equipment as a sawmill. What other capabilities does a chainsaw have that can be expanded using special attachments? you can read in the material Repairing an angle grinder with your own hands quickly and easily Wood saws for the home, their types and requirements for selection [Total votes: 1 Average: 1/5]

A sawmill is a very useful equipment that allows you to evenly and correctly saw a large log into logs or boards. As a rule, this equipment is quite expensive and not every person could afford it for domestic use. It is for this reason that you can make a sawmill from a chainsaw with my own hands, which will save a large amount of money.

On the Internet and on forums, craftsmen provide a lot of advice, drawings, photos, videos and diagrams with which you can assemble a sawmill yourself using available materials.

How to make a homemade sawmill from a chainsaw with your own hands?

In order to correctly understand the drawings and diagrams, you need to understand what types of home-made saw installations exist and what their differences are. Thus, there are mobile sawmills and stationary ones, which, in turn, are divided into mobile and stationary.

In a mobile chainsaw sawmill, the sawing part moves along the log and can be moved to any convenient place. Your workpiece acts as a guide, making it easier to use and lightweight design. The only drawback that a mobile sawmill has is the need to constantly monitor the size of the stroke.

Stationary ones have a better quality cut and high accuracy and correctness of sawing. In stationary installations, the workpiece itself moves towards the saw. The movable one, in turn, has rail guides, thanks to which the saw moves while the workpiece remains stationary. This design is easy to assemble and use, but the length of the workpiece is limited.

Choosing a chainsaw for a home sawmill

The main part of the installation is chain Saw and her choice must be taken with utmost care. You can install either a new, just purchased saw, or a used one, such as the Ural brand. To create a sawmill, you can use not only a chainsaw, but also an electric saw. The only thing you need to remember is that you will be limited in your movements due to the length of the network cable.

For correct selection saws, it is important to initially understand the intended purpose of the installation. For semi-professional, commercial use, give preference to stationary sawmills with powerful and productive saws. Domestic use of the equipment allows you to choose a less powerful chainsaw by creating a mobile mini sawmill with your own hands according to drawings from the Internet.

What do you need to make a manual sawmill from a chainsaw with your own hands?

It is not necessary to contact service centers or ask for help experienced craftsmen all trades. Schemes and drawings of the sawmill with your own hands are laid out in large quantities on the forums. You can find the type of installation you need: stationary, mobile, mini or manual sawmill. Next, having all the necessary spare parts and tools, even without the special skills of a designer or engineer, you will be able to assemble the structure, guided by additional photos, videos and step-by-step instructions.

Required Parts

In order to make a sawmill from a chainsaw with your own hands, in addition to the sawing unit itself, you will need:

• pipes with a diameter of 35-40 mm;
• two eight-meter channels with a height of 15 cm, onto which the entire load from the structure is transferred;
• two perfectly straight rails that act as the top of the sawmill and guides;
• corners of the following sizes: 50*100 mm, 40*40 mm;
• sliced water pipe into 25 cm pieces, which will be used as ties;
  steel plate, the length of which is at least 60 cm and the thickness of 4 cm;
• hoses that act as protection for electrical wiring.
• Tools for assembling sawmill from chainsaw

In addition to parts and components, you will need improvised tools such as a set of screwdrivers, metal files, fasteners (screws, nuts, bolts, bearings) and others that almost every man has. You also need to acquire a welding drill, a device thanks to which you can connect individual parts and weld them securely together.

Instructions and drawing of a homemade sawmill

Work begins with the design of the base, the frame of the structure. Angles and rails are used for this. The designer must properly level them and weld them. You will see a drawing of how to make a sawmill from a chainsaw below:

The next step is to install the frame on racks, which are made from steel angles. Remember to leave a gap of about 1 meter and weld the parts. If you plan to work with large volumes or logs large diameter, you will need to weld braces between the posts to make the sawmill more reliable, stable and strong.

Next, you need to assemble a cart from the corners and install the cutting part on it. Here you need to take into account the model of sawing equipment and the length of the bar. Corners 40*40 mm are welded from below, rollers with bearings are placed on them and 2 more similar corners are welded on top. Check the degree of welding of the fasteners very carefully, since your sawmill structure must be very strong.

When you assemble a sawmill from a chainsaw or power saw yourself, pay a lot of attention to securing the logs, since the wood can move a lot during cutting. To secure the log in one position, forum user Oleg recommends installing movable hoses and pipes.

Fixing wood - important point, because thanks to the complete immobilization of the log, you can get even and identical boards and logs.

You can find a lot of information on the Internet about how to assemble a sawmill from a chainsaw, but there is little information regarding saws with electric drive. The design and build process is completely the same. Drawings for sawmills and electric saws are available in the same way and are practically no different.

The only thing to consider is that there must be a power supply nearby. To a greater extent, users install the installation in a garage or small workshop. In this case, it is better for you to make a mini sawmill from an electric saw, which will not take up much space.

Video on how to make a sawmill from a chainsaw with your own hands