Homemade designs for the home. Useful homemade products for the home - do it yourself

Manufacturing electronic homemade products Do it yourself gained popularity back in the last century, when semiconductor devices appeared. With their help, it was quite easy to assemble devices needed for everyday life from old equipment. Today, repair and assembly of equipment for the home or cottage, for a car or garage can also be solved at home.

[Hide]

Homemade devices for home and garden

Electrical homemade products for home and garden that use the power of electricity can be made by every electrician. Most devices are created using factory components and require only school knowledge of electricity.

Electric kebab maker

The electric kebab maker can be either horizontal or vertical. Stores usually sell vertical ones, and they do their job well after some modification.

To create a horizontal kebab maker you will need a heating element and a frame resembling a barbecue. The heating element can be made from a ceramic tube and a nichrome spiral wound around it. The tube is secured through an insulating material in a metal casing. Drawings will be required to assemble the case.

Barbecue grill

An equally interesting idea is a barbecue grill with electric drive for rotating skewers. By adding an electric motor to a regular barbecue, you can get an excellent device that will cook barbecue in autonomous mode. To organize the skewer drive, you can use a motor from the wipers, from washing machine or any other 12 Volt. Using a system of pulleys and a belt or gear drive, the rotation of the shaft is transmitted to the skewers, and the meat is slowly turned over the coals.

Homemade WI-FI antenna

Such an antenna will improve the quality of reception and Wi-Fi speed at your home. According to reviews, after connecting it, the signal level rises from 5 to 27 Mbit.

For production you need:

a small metal sieve or colander;
Wi-Fi adapter (USB);
USB cable;
drill;
epoxy resin;
camera tripod;
plastic clamps.

Manufacturing process:

We drill a small hole (14 mm) in the center of the sieve and insert a metal pin into it to secure the adapter.
Insert the connector from the USB cable into the prepared hole and secure it with epoxy resin. The USB connector after gluing must be strictly perpendicular to the plane of the sieve, then the device will work more efficiently.
Then, using two zip ties, “ears” are made through which the cable is attached.
We fix the product on a camera tripod. We drill a hole with a diameter of 12 mm in the antenna and tighten it with a nut.

Necessary materials Insert the pin into the drilled hole Glue the USB cable Securing the cable Tripod Installing the antenna using a tripod

Electrical homemade products for the garage

Let's look at several useful DIY projects for the garage.

Homemade chandelier

If in your garage low lighting, then an improvised chandelier will be very useful. To make a bifurcating chuck, you will need a pair of angular chucks, which are sold at a regular hardware store.

Sequencing:

We remove the wires from the sockets and fasten them with plastic tie. We get a socket for two lamps. All that remains is to connect them to the electrical network.
To do this we use the base from fluorescent lamp. Carefully break out the lamp, then solder the wires from our design to the contacts of the base.
We insulate them well and attach the base on top of the cartridges.

The use of ordinary light bulbs in this design is undesirable - the sockets may melt from heating.

LED device

Another lighting option could be a homemade LED lighting device.

To make it you will need:

old fluorescent lamp;
LED Strip Light;
connecting wires.

The manufacturing sequence is as follows:

An LED strip is glued to the lamp body in one or several rows.
The connecting wires are connected and brought to the lamp switch.
The assembled device is tested.

Spot welding machine

A necessary device in the garage will be homemade apparatus for spot welding, the basis of which is a transformer from an old microwave oven. Prerequisite— the transformer must be working in order not to rewind all the windings.

The process of assembling the welder is quite simple:

The transformer is dismantled.
Carefully remove the secondary winding.
Two shunts are removed.
A secondary winding of two or three turns is made of thick wire (with a diameter of at least 10 mm).
Electrodes for resistance welding are made from a copper rod with a diameter larger than the wires.

Homemade spot welding tool

Useful DIY items for fishing

Among the homemade products you can find many interesting ideas for use in hiking conditions, as well as hunting and fishing.

Electronic alarm

An example would be an electronic signaling device for fishing with a regular fishing rod or other equipment. A simple biting device can be assembled in just half an hour. For it you will need an old beeper keychain and a strip of plastic 1-2 mm thick.

Alarm assembly:

The keychain is attached to the rod.
A strip of plastic is glued to the fishing line and inserted between the contacts of the key fob.

Now when the fish bites, the fish will pull the line, the plastic will fly out, the contacts will close and the key fob will work.

Underwater camera for ice fishing

Using a homemade underwater camera for winter fishing, you can see if there is fish under the hole. And this simplifies the fishing process.

To make it you will need:

small camera;
sealed camera box;
small TV;
car battery to power the camera;
extension;
inverter;
lead for cargo;
ultraviolet diodes for illumination during underwater shooting;
superglue, electrical tape, sealant.

Build process:

Two holes are made in the upper part of the box. An extension cable is inserted through one. Through the second is the wire that connects the camera to the TV.
Several more holes are made in the box into which light bulbs are inserted for illumination. The wires from the light bulbs are soldered into one circuit (for example, with a parallel arrangement), which is connected to a cable that provides power.
The holes are sealed with glue and tape for a tight seal.
Lead is melted and small elongated bars are poured out of it. They are placed at the bottom of the box.
Set up the camera and connect it to the cable. After which it is carefully placed in the box so that it has a clear forward and horizontal direction and transmits a high-quality image. For stability, the chamber is surrounded by soft material.
A torso (rope, belt) is attached to the box, which will be used to lower the camera to depth. For convenience, you can combine it, the power cable and the communication wire between the video camera and the TV into one core, secured with electrical tape.
Connect the power cable of the video camera to the battery and test the device.

Homemade fish bait

You can make a good bait for fishing yourself. This will be a device assembled based on a simple multivibrator.

You will need:

sound emitter, for example, from a children's toy;
wires;
a small plastic jar, for example, for medicinal tablets;
electronic board;
regulator with plastic rod;
a piece of foam;
batteries;
weights for the float;
volume control.

The bait is assembled as follows:

You need to solder the circuit and check it.
Two wires are soldered to the sound emitter. Then they are carried inside the case and connected to the board.
A regulator with a plastic rod is placed in the lid of the jar.
A dense circle cut out of foam plastic is installed on top of the board, which separates the board from the battery.
Weights are attached to the bottom of the jar so that the container floats on the water like a float.
The regulator sets the frequency and changes the sound.

Bait scheme - 1 Bait scheme - 2

Electronic homemade products for cars

Car enthusiasts create homemade products with their own hands to improve appearance and ease of use of the car.

Electrical auto tester

A simple homemade electrical probe is perfect for a car. It can show the presence of a voltage of 12 volts in an electrical circuit. It is used to check the serviceability of relays, as well as light bulbs and other equipment. You can make such a device from a syringe and LEDs.

Assembly diagram:

Two LEDs are soldered with opposite terminals (plus one to the minus of the other and vice versa).
A steel probe is connected to one of the solders through a resistance of 300 Ohms. To the other solder there is a contact for batteries.
The design is inserted into the syringe so that the probe comes out of the hole for the needles. Most of the probe is insulated with a PVC tube.
4 LR44 batteries are inserted into the syringe so that one of the poles is connected to the LED contact.
The other pole of the batteries is connected to a flexible wire with an alligator clip.

The video explains how to make a syringe tester. Filmed by ILYANOV channel.

Light switch

The scheme for smoothly turning off the lights in the car interior is quite simple to manufacture. Such electronics are suitable for any car. A small board consisting of a capacitor and diodes is soldered parallel to the interior lamp terminals. The drop in electricity voltage will occur gradually and create the effect of a gradually fading light.

Car subwoofer

To make a car subwoofer with your own hands, you must first purchase a speaker. You need to start from its dimensions when calculating the size of the case.

The simplest and most suitable form of a subwoofer for the trunk is a truncated pyramid with a slope similar to that of the rear seats.

LED fog lights

You can make LED car fog lights with your own hands.

For creativity you will need:

two ten-watt LEDs;
2 lenses from an old projector;
gaskets from plastic pipes;
LM317T microcircuits;
resistors.

Instructions for assembling the craft:

LEDs are installed on pre-prepared aluminum radiators.
The structure is assembled from headlight housings, lenses from projectors, gaskets and diodes on radiators.
The fog lights are powered through current stabilizers on LM317T microcircuits and resistors.

Car carrying

A very convenient car carrier is made from a computer USB lamp. It is compact and you can connect the device to any place in the car wiring.

Manufacturing scheme:

Remove the contacts from the USB plug.
In the plug body we connect the wires of the lamp and the car alligator clips.
To mount it in the right place (even horizontally), a magnet is placed on the plug.

Someone will certainly look at this collection of ideas and say that it would be easier to buy new furniture or decor. But this article is not for them, but only for true connoisseurs of unique style and products self made. Here you will find 10 of the most beautiful interior items that you can make for your home with your own hands without spending extra money.

The best DIY home crafts from scrap materials for 2018!

1. Decoupage and other DIY furniture repair ideas

Restoring old chests of drawers and sideboards is perhaps one of the main trends of our time. Many pieces of furniture fail over time: tables and chairs have loose frames, cushioned furniture is pressed through and requires a new “filling”. But chests of drawers and sideboards can stand for many years and bother you with their outdated appearance.

Home crafters and decoupage masters have not only found a way to update the design old furniture, but also created a fashion for using vintage “grandmother’s” chests of drawers in the interior. Detailed instructions on painting and decoupage you will find in our article .

Below are some photos of amazing home projects to inspire you.

Restoration of an old chest of drawers with replacement of handles and hand painting:
Painting and finishing old cabinet with metal buttons:
As a result, the furniture acquired an original decorative effect in Moroccan style. Simple, like everything ingenious:

By the way, in this way you can create more sophisticated things for the home:

Decoupage and painting amazingly transform old furniture facades, but not every person has enough time and patience for this painstaking task. Therefore, the best DIY home ideas will also include remodeling furniture using duct tape to look like marble, gold, and other fancy finishes. A minimum of effort - and the most ordinary piece of furniture will turn into the main decoration of your interior.

2. Beautiful things for the home with your own hands: carpets

Perhaps the most pleasant thing about creating things for the home with your own hands is when one of the guests asks: where did you buy such beauty? A stylish rug with a zebra print (or other motif of your choice) is sure to earn such a compliment. And more than once.

The fabric can be any. The main thing is that it is not too demanding to care for: it is not afraid of moisture and is easy to clean. In this case, the master chose vinyl fabric. It is heavy and durable enough to look like a true carpet. What's more, the quality of vinyl these days is very impressive and is available in a wide range of colors and interesting textures.

All necessary materials and tools:

Thick paper;
Vinyl upholstery fabric;
Scissors;
2 Krylon pens or regular fabric paint.

Procedure:

Create a stencil from paper. Draw and cut out the outline of the zebra skin, then the drawing itself on it. Don't worry about your artistic talent - a zebra's skin shouldn't look uniform or symmetrical. As a last resort, the pattern can be copied from a picture on the Internet or even printed to cut out.
Attach the stencil to the vinyl fabric and trace the outlines of the stripes with Krylon pens (apply paint with a spray or brush). After this, the stencil can be removed and you can continue painting the areas inside the contours.
Let the paint dry and you're done! To make sure the pattern will stick, you can “seal” the rug by spraying it with a clear coat of acrylic spray paint.

Krylon pens create a stunning gold leaf effect on the surface of the fabric. In addition, the paint in them dries quickly and adheres very reliably. If you cannot buy them in your city, then use regular paint for fabrics or walls. As the next hero of our article.

He took a cheap white rug as a basis and decided to give it interesting view do it yourself using a chevron pattern. All he needed was thin duct tape, scissors, a thick brush and latex paint in two different shades.

Finally, another inspiring example in which a makeshift stamp is used instead of a stencil. The craftsman had a rubber bath mat, leftover wall paint (it was slightly diluted with water to achieve a vintage effect), a roller and an old IKEA wool rug. Let's look at the photo what he managed to cook from these ingredients.

3. Unusual “marble” DIY crafts (photo)

7. Turn photos into wall decor

It's much cooler than just hanging framed photos! Yours private photos or any images you like from the internet can be turned into beautiful wall art for any room. To make this decor with your own hands, you can use any of the following methods.

Find or buy a backing. It can be a thick sheet of polystyrene foam or polystyrene foam (as in this case), a board and other available materials.
Print the photo, having previously edited its dimensions so that they are approximately 5 cm more sizes substrates. These “extra” centimeters will be used for folds.
Cut the photo and backing into pieces if you want a modular set rather than a whole painting. Otherwise, skip this point.
Place the photo on the backing and fold the ends. The author of this product used double-sided adhesive tape to secure the photographs. You can mount on regular glue or other available funds. The surface of the photographs itself can also be treated with glue or paste for shine.

Print the image and prepare a canvas onto which it will be transferred.
Stretch the canvas over the frame and apply a thick layer of gel medium on it. These gels are widespread and today they can be bought at any finishing materials store.
Place the photo on the greased canvas and press down. Leave it like this for several hours, but periodically spray it with water from a spray bottle.
Carefully, using your fingertips alone, begin to erase the back surface of the image from the canvas. Remove all paper in this way.

The result is a beautiful one with wear and tear that will only give it a touch of vintage style. All that remains is to apply it to it last layer gel medium as a protective coating.

For inspiration, we’ll give you a couple more ways to decorate your interior using photos.

We use the old one window frame as a photo frame. What do you think of the idea?

8. Creative homemade lampshades for lamps

Homemade lampshades made from fabric, paper, thread and other improvised means will not only decorate your home, but also bring an unusual atmosphere to it every time. dark time days.

Look for the best ideas to suit your taste in our article . On next photo- a popular creative lampshade made of threads.

9. Succulents - living home decor with your own hands

A succulent living wall is perhaps the most amazing of all the DIY home crafts you can make. Agree: if you saw it in someone’s living room or other room design, you wouldn’t be able to remain indifferent!

Dekorin will tell you how to get such impressive and environmentally friendly decor:

You will need a shallow wooden container for planting and a metal mesh.
To secure the mesh to the container, use an improvised wooden frame, which can be made from small boards or wood chips. Attach to staples or nails.
Prepare any for composition. They easily take root in the most difficult conditions and look most advantageous when you combine different shades and shapes of leaves. Common examples of succulents: aloe, various cacti, young or rock rose (Sempervivum), sedum (Sedum), rockweed (Orostachys), etc.
Fill the container with soil and plant your chosen plants in it. Use any cactus mixture for drainage.

Here are examples of crafts for the home that you can make with your own hands using the above method.

10. DIY home crafts from glass containers

Glass bottles and jars often accumulate on balconies and in storage rooms. What they are not turned into today: lamps, candlesticks, vases, table decor... It's amazing how easily they become part of stylish interior, you just need to use a little ingenuity, as well as paints, fabrics, threads, paper and other improvised means. Last batch of photos for today. Also read:

10 best ideas what you can do for your home with your own hands updated: March 21, 2018 by: Margarita Glushko

Nothing brings joy to the house more than something made with your own hands. Indeed, various homemade products for the home not only fill life bright colors, but also give the interior uniqueness and some zest. And it’s certainly impossible to forget about such a thing (even if it’s a small trinket). Moreover, it is not so important that these are homemade products made from wood for the home, from paper or plasticine. There are millions of options and methods for making various gizmos, and today we will look at several of them. So how to do it interesting homemade products for home?

Shelf made of tin cans

It would seem that such a trifle is a coffee jar. However, even from it you can make a beautiful, convenient and useful shelf for storing household items. Often, various souvenirs and memorable photographs are stored in such containers. There is little practical benefit from this homemade product, but such jars look very harmonious.

Details about the procedure for making this craft

1. First, holes are made in the jars using a drill or a special knife-ripper (in the top and bottom - 3 points, and in the walls of all the rest - 2 points).

2. Next, the jars are fastened together. Small nuts and screws are used as fastening elements. By the way, to get the desired (beautiful) result, you will need to have at least 5-6 of these jars.

3. Afterwards, a hole is punched in the containers for screws. 1-2 holes are made in the bottom of the jars located in the upper part of the structure to attach the shelf to the wall. The finished homemade product is screwed on with a screwdriver or screwdriver. To do this, dowels are first driven into the wall.

That's it, now homemade products for the home are being introduced. Rest assured - various small items will definitely not get lost in such jars. Thus, you kill two birds with one stone - decorate the interior and get rid of clutter in the house.

Homemade crafts for home - how to make a clock on a CD/DVD?

The clock on the CD is also very interesting and original version interior decoration.

As you can see, the design of this device is very original, and therefore it will look organic against the background of any interior (perhaps it will become its highlight). Such “smart” homemade products can be made for the home in a matter of minutes. We will tell you in more detail about all the stages below.

So, how to make a homemade watch with your own hands? First, you will need to prepare the appropriate materials - a CD/DVD (you can choose the design of its front part at your discretion) and a cover-case for it (the distance between the walls should be at least 0.05 centimeters). It is very important that the last part does not have any chips or scratches. To make the work easier, you can purchase a ready-made watch and then simply replace the standard dial.

It must be a pointer, otherwise you won’t be able to make a homemade product. You should also do the numbers. There should be a total of twelve of them. These can be cardboard, paper or plastic circles. Their thickness should not exceed two millimeters. Rhinestones can be used as decorations. You also need to prepare about 30-40 centimeters of wire, a piece of leather or fabric and “Moment” type superglue. The core of this entire design will be the CD. We will redo it first.

First you need to mark the disk by twelve equal parts and glue the numbers to the marked dots. In this case, the sectors should not go beyond outside diameter devices. How do you make homemade products for your home? After the sectors, we proceed to the clock itself - remove the arrows and place them exactly in the center of our disk. By the way, before attaching them, you can stick some interesting photograph on the disk, which will make the design of the watch even more original.

To increase the size of the arrows, use thin metal strips. To achieve the desired result, it is enough to apply glue to them and carefully position the part evenly over the entire surface of the guiding elements. The arrow mechanism itself is attached to back side disk.

What to do next?

So, the base of the watch is almost ready. The next step holes will be made in the device along the contour of the arrow mechanism. The field of this disc is installed in a case. The mechanism itself is brought out through the hole and closed tightly. Now, using wire, a stop is made, which is glued to the back cover. To make it more durable, glue a piece of fabric or leather on top of it. This will make the stop not only strong, but also beautiful, since the excess part of the wire will no longer gape on the watch as before. That's it, the homemade watch from a CD has been successfully made. All that remains is to insert the AA battery and set the time. By the way, you can also make a battery yourself.

How to make a source of energy from a lemon?

As we know, this fruit contains a lot of acid, accordingly, when correct actions A lemon can be turned into a real mini-battery.

Of course, the charge from such a “battery” will not be enough to operate household appliances, but for operation or charging mobile phone this current is quite enough.

Making homemade crafts for the home - preparing tools to turn lemon into a source of constant energy

During the work you will need tools such as a knife, soldering iron, drill, iron pin, as well as several pieces copper wire in isolation. Among other items, it should be noted the need for one glass or shot glass, a pair of wooden sticks and the same number of push pins. And, of course, our main source of energy will be lemon. You can also use orange, but it contains much less acid, so the charge from it will be minimal.

Instructions

First, cut the lemon in half. This is necessary so that it gives more acid necessary for the Lemon to be fixed in the glass so that it does not roll around the table. Next, copper and iron pins are inserted into its flesh along the entire perimeter at a distance of 0.5-1 centimeter. Our “minus” will be iron, and our “plus” will be copper.

Pieces of wire are attached to all the pins using a soldering iron. They will serve as a connector for the power supply. All elements are connected in series.

On final stage sticks are inserted into the battery compartment. It is important to observe polarity here. The contacts are pressed against contact group. The container remains open throughout the entire charging process of the device.

So we figured out how to do useful homemade products for the home with your own hands. Good luck in your endeavors!

Isn’t it great to put a mini fountain on your table, and even one you made with your own hands? He will be your pride, all your friends will simply be jealous.

This fairly simple and easy-to-make fishing rod stand allows you to store up to 18 fishing rods, takes up very little space and, if necessary, can be easily put away, for example, in a closet. I made this stand using a CNC machine, but it can also be made using a regular jigsaw, it just takes longer...

This video shows how you can make a salt lamp with your own hands that can glow different colors(RGB). To make it you won’t need much: Salt crystals; LED strip (RGB) with controller; A small box made of wood and plywood; At least a video on English language, but I hope everything will be clear.

We bring to your attention beautiful project a designer night light that you can easily make with your own hands. The main material for building a night light is wooden sticks. For manufacturing you will need the following tools and materials: Wooden sticks(I used sticks seven centimeters long, 5 mm in diameter). You will need 120 of them;...

Surely many of us would like to have a strobe light at home to decorate a small party and give it a little drive. As a rule, they are made using flash lamps, but unfortunately they are quite expensive and have a short resource. I decided to replace the lamps with LEDs, and I can say with confidence that such a DIY strobe light for a disco can...

One way or another, everyone who works with wood sometimes ends up with a lot of different scraps of wood. different breeds. Of course, you can just throw them in the trash, but I suggest you make a very beautiful one out of them. cutting board with your own hands. In addition to your practical value she will delight you with her...

Surely some of you at home or in the garage have an old unnecessary CRT monitor that no one has used for a long time, but it would be a pity to throw it away. Moreover, it is heavy, it needs to be carried to the alphater, etc. That is why I suggest you make a house for your cat out of an old monitor with your own hands. Looks...

A wall-mounted bookshelf can be a great decoration for your interior, especially if you make it yourself. At the same time, its production will not only free up space for one or two dozen books, but also surprise your friends and acquaintances with your unusual appearance. My first thought when making a wall...

A hot stand is one of the necessary items in the kitchen; it is the one that keeps kitchen furniture from exposure hot dishes. The stand can be used to place hot pots, pans and more. In addition to its direct purpose, the hot stand is also used as an interior item or as a decorative item for the dining table....

The idea of making a subwoofer with my own hands has haunted me for quite some time. The fact is that I really love listening to music and watching movies, and the speakers I had did not play normal bass (and it could only be called bass at a stretch). Therefore, when I saw a Semtoni woofer in a store...

The “Homemade Crafts for the Home” section is intended for everyone who appreciates the coziness and comfort of their hearth and wants to surround themselves with beautiful and original things, decor and useful things. The interior of a house is always unique, it can reflect inner world their owners, their tastes and style. Therefore, every thing that we do with our own hands adds not only comfort, but also lifts the mood and brings a special atmosphere.

Everyone can do it!

You can make a lot of useful, beautiful and creative things at home. Moreover, on your own! Anyone can do this, and no special talents, skills, or abilities are required. A little inspiration, imagination, and everything will work out! And the Top-Samodelki website will help absolutely everyone, without difficulty and expense, turn their home into a cozy nest, and furnish it with the most beautiful things self made.

In this section you will find not only decor, but also many useful things. Lamps and lamps, original figurines, fountains and vases, convenient shelves and stands, houses for animals and useful little things for the kitchen - here we describe in detail how to make all this yourself.

From the simplest materials

Not only will you not have to spend a lot of effort, but you won’t need any special, expensive or unavailable materials for crafts. All homemade products are made from simple, affordable or even improvised materials, such as:

Wood, planks or slats;
Plywood;
Textile;
Plastic or plastic;
Old unnecessary toys;
Shells, pebbles, various decor;
Old monitors and stuff.

Some work will require tools, but they are also the most traditional, and are found in absolutely every home. Fantasy is the main assistant. On the site in this section you will find the most original ideas how you can make a masterpiece out of “trash” and decorate your home!

Many people think that making decor or useful things for the home is a difficult task, and they don’t take it on. But following the instructions on the site, anyone can create a small masterpiece!

Crafts made from old objects and things that can be given a second life can make your home much more comfortable. Some homemade products made for household DIY projects can significantly save your home budget, make your work easier, or make the surrounding interior more interesting. And even if difficulties arise in the process, overcoming them will be worth it.

Homemade crafts for the home workshop

In almost any home there is always some set of tools necessary for farming. But sometimes situations arise when working in your own workshop or garage requires some kind of device that cannot be purchased in a store or is very expensive. In this case, you can find a way out by making it yourself.

Forge from a balloon

This device for heating metal will become an indispensable assistant in a home workshop. The forge can be safely used to make original items using artistic forging. These will be truly unique forged items.

For the forge, it is best to use an empty 25 liter gas cylinder. Its ends are cut off with a grinder, and the door of the forge and its back part will be made from the cut parts. Interior The cylinder is covered with fireproof ceramic wool, which can withstand temperatures of more than 1200 0 C. On top it is coated with fireclay clay (lined), which can withstand temperatures up to 1500 0 C. After lining, fireclay slabs or refractory bricks are laid on the bottom of the hearth.

A hole is drilled at the top and a small squeegee is inserted, allowing the nozzle of a gas-powered burner to be inserted, which can create a temperature in the forge of more than 1000 0 C - quite sufficient to heat the metal to a certain temperature suitable for forging.

Collapsible garage crane

When manufacturing such a lift, the cash costs will be much less than purchasing a factory model. To make it, you will only have to spend money on materials, half of which may be found in the garage.

Materials required to assemble the lift:

Two racks - profile pipe 100x100x2350.
Cross rod - steel pipe arbitrary length with a diameter of 100 mm.
Four supports for the rod - profile pipe 100x100x600.
The base and braces are a corner with 100 mm shelves.
Two metal rollers for the cable.
Four wheels for movement.

For lifting mechanism it is best to use hand winch with a worm gear with a maximum load of up to 500 kg, which is attached to one of the racks of the crane beam.

The design does not take up much space in the workshop and can be easily moved around hard surface and is quite convenient for removing the engine from the car.

Mobile tool rack

The main highlight of this rack is its small size , but at the same time you can place it on it a large number of tools, and if necessary, quickly move it to any place or neighboring room. It is very convenient to use such a rack in your workshop or when carrying out construction and repair work in large rooms, especially when tools need to be moved frequently.

The rack can be assembled on the basis of a collapsible plastic rack installed on a homemade platform with wheels (trolley). The platform is made precisely to the dimensions of the rack from metal corner with shelves 45x45 mm or a sheet of plywood with a thickness of at least 10 mm. Furniture metal wheels are used for movement.

It is additionally possible to manufacture and attach fastenings to the rack for building levels, extension cords and other tools that can be stored hanging.

To help the hostess

It is not always possible to financially buy, for example, some new furniture in furniture showroom or place an order for its production. But you can always get out of this situation by making the right thing with your own hands, and at the same time making it attractive and unique, using improvised means for this.

Kitchen apron made of corks

The kitchen apron is the surface of the wall located between the countertop and wall cabinets. Usually this part of the wall is lined tiles. But it is possible to use many other materials to cover it, for example, gluing wine corks to the wall.

Such exclusive decor looks pretty great.

Before sticking, each cork is cut lengthwise into two halves with a sharp stationery knife. It is advisable to paint the wall black, which will highlight the seams between the plugs.

Corks are glued to the wall using liquid nails in a checkerboard pattern or with a specific pattern, since it is unlikely that it will be possible to lay them out perfectly evenly, and curved rows will visually look disgusting.

The plugs themselves are not afraid of moisture, but they quickly get dirty and are difficult to wash, so it is best to cover them with a glass screen made of tempered glass. True, you will have to spend a little money on it and order glass from a special workshop, where they will cut it to a given size and make holes for sockets and fasteners.

The glass is fixed to the wall with anchor dowels, which can be purchased at almost any hardware store.

Although the apron, decorated wine corks, may turn out to be an expensive pleasure, but the result achieved will be worth it.

The surface of the tabletop, as well as the wall, can be decorated with corks and covered with tempered glass.

Hanging folding table

Wall mounted folding table allows you to save some space in the apartment. When folded down, it can protrude from the wall at a distance of no more than 10 cm and does not bother anyone at all, but when unfolded it can replace a full-fledged table.

There are many options where you can use a wall-mounted folding table. Here are just a few of the most basic:

Shower for the cottage

There is probably nothing better than cooling off under running water on a hot summer day, especially if it was spent working in the garden. Naturally, only a shower will solve this problem and relieve the fatigue that has accumulated during the day.

You can install the shower yourself without involving outside help, the main thing is to choose a place for it and decide on the type of shower stall.

Among the summer showers, three types of cabins stand out:, which you can freely build on your own:

Installing a simple shower is done as follows:

A shower cabin frame is made, which can be assembled from metal, wooden beam or other available materials.
On the roof assembled frame metal or plastic container for water, which can be from 50 to 200 liters.
It is advisable to paint the metal container black for better heating of the water. Additionally, several heating elements can be installed in the container. electric heating elements, then you can take a shower even in cloudy weather.

The booth can be sheathed with boards, plywood, slate, or simply covered with tarpaulin or cellophane film with folding curtains.

For construction on your own

The topic of construction or renovation probably worries everyone. And, naturally, everyone who is involved in it wants to finish it quickly with minimal financial costs. Therefore, if you want to save money, you can make some materials for construction on our own. For example, these could be wall SIP panels or such a useful tool as a vibrating plate, the need for which often arises for many owners of a personal plot.

Homemade SIP panels

To make them, you need to prepare a flat, hard platform. Laying a 10-12 mm thick OSB sheet on it rubber spatula with teeth, apply glue to it.

Then lay sheets of grade 25-30 foam plastic on the glue. After this, an adhesive mass is applied on top of the laid foam, as well as on the bottom OSB board, and a second sheet of OSB is laid on top.

If several slabs are being made at the same time, stacked, the work should be done quickly until the glue hardens. Typically, no more than 4-5 panels can be prepared in this way at a time.

After preparing the formed slabs, you need to create pressure using a press. Since at home, of course, there is no hydraulic press, it can be replaced with a thick plywood sheet, laid on prepared SIP boards over the entire plane and loaded for 2-3 hours, for example, with several bags of cement, sand or other cargo. You can even use a passenger car, driving onto a plywood sheet along a pre-made overpass.

After the glue has completely dried, the homemade panels are ready; they can be placed in a separate stack and you can begin preparing new panels. The manufactured panels should lie unloaded for another day, after which they can be used for their intended purpose.

Making a vibrating plate

To make a homemade vibrating plate, you will need to prepare:

An electric motor with an IV-98E eccentric, which is the main part of the vibrating plate.
Steel sheet, at least 8 mm thick, size 450x800 mm. It can be ordered at any metal warehouse.
Two pieces of channel no more than 400 mm long.
inch pipe for the handle and two rubber bushings for its fastening.
The tools you will need are a welding machine, a grinder and a set of wrenches.

On the narrow sides of the slab, stepping back 80-100 mm from the edges, make an incision with a grinder to a depth of about 5 mm. After this, bend the edges towards the cut at an angle of approximately 25 0 and weld them. The bends are needed so that the vibrating plate does not sink into the material it compacts and moves freely along its surface.

Then, across the slab at a certain distance calculated for mounting the electric motor, two channels are welded with the shelves down. Through in advance drilled holes in the channel, using M10 bolts, an electric vibrator is attached to them.

The handle, made of pipe, is attached to the vibrator through soft rubber bushings, which can be purchased at an auto parts store or hardware store in the hardware department.

Thus, you can make a lot of useful household things with your own hands, spending only a fraction of the money that you would have to pay upon purchase. finished product. You just need to put in some effort and have certain skills.