Terraces to the house photo gallery polycarbonate. Polycarbonate veranda: construction features

Reading time ≈ 3 minutes

Building a small veranda from polycarbonate sheets allows you to quickly get an inexpensive extension to your house. Finished design can be used for relaxation fresh air in summer time. Due to the affordable cost of materials and the ease of their assembly, making a terrace will require a minimum of time and money.

Polycarbonate veranda base

The optimal solution would be to make a strip foundation. A lightweight polycarbonate veranda made by yourself allows you to save on preparing the base. To make a foundation, you will need to dig a trench, fill in a sand bed, and install formwork. Place reinforcement inside and fill the resulting form with concrete. The hardening time for the base will be approximately 1-2 weeks.

Preparing the floor and assembling the main structural elements

Making the floor will require pouring sand and compacting it tightly. Next, you need to pour a small layer of fine crushed stone and lay reinforcing mesh. The elements are connected using ordinary wire. Next, the screed is poured, which will serve as the basis for subsequent finishing.

To give the adjacent veranda to the polycarbonate house a stylish look, you can use tiles or decking boards as flooring material. Raw materials will have long term service and will highlight the uniqueness of the extension’s decoration. When Finishing work are completed, the contractor can assemble the main components of the structure:

Attach the bottom profiles to strip foundation, install adapter corners between adjacent elements.
Install the wall profiles, firmly attaching them to the wall with dowels.
Mount the corner profiles, install the top profiles on which the roof will be laid.
Install the remaining vertical profiles (for subsequent installation of doors, windows, to strengthen structures with long walls).

In the future, a polycarbonate veranda attached to the house is made, no less simply. But it is important to remember that there is no need to tightly fix the jumper profiles: in the future, polycarbonate sheets will be installed between them.

Assembling the walls and roof of the veranda

When the veranda frame is completely ready, you can begin installing the polycarbonate sheets themselves. First of all, you need to fix the sheets whose profiles are adjacent to the walls. Next, you can install the remaining wall elements, excluding closing the passages and areas where the windows will be located. In order for a DIY polycarbonate veranda to be truly practical, it is recommended to install a couple of windows and leave space for installing a ventilation grille.

The next step is to glaze the veranda with polycarbonate on top. To do this, support profiles are installed, which are responsible for fixing the sheets on the roof. Next, the sheets themselves are mounted. If necessary, you need to leave space for installing the window in the upper part.

Installation of windows and doors

After the polycarbonate has been laid on the roof of the veranda and the profiles have been completely fixed, you can proceed to the installation of doors and windows. You can use metal-plastic products with single-glazed windows. They are light in weight and can be easily mounted on profiles. Additionally summer terrace made of polycarbonate may include a small ventilation grille (with closing blades).

The last step is the installation of polymer gutters, which are responsible for draining rainwater. Thanks to them, the veranda at the dacha from cellular polycarbonate will serve the owners for as long as possible. Then the terrace is arranged: armchairs, sofas, tables are installed. Using the attached photos you can find many original solutions to decorate the extension. It is recommended to additionally install flowerpots with fresh flowers on the site and attach curtains. Fabric sheets will protect well from the sun and give the finished veranda a stylish look.

Many homeowners believe that the veranda is something like an unheated storage room. They store tools, bicycles and bags of cement there. But in reality this is good opportunity build a comfortable area for family relaxation. Especially if you attach a veranda to a polycarbonate house. Photos of such premises delight the eye with their lightness and elegance.

Types of verandas

The classic veranda is a closed cold room attached to the first floor of the building. Its volume should be comparable to the size of the house.

Usually the veranda is built-in, i.e. erected together with the house, on the same foundation. If the moment was missed, then it is quite acceptable to attach a polycarbonate veranda to the house. Photos will help with the choice of design.

By the way, installing a light extension on a single foundation with the building is still a controversial issue. These structures differ too much in weight and, as a result, give different shrinkage. Experts believe that on soft soils buildings may move away from each other. Therefore, in some cases, a polycarbonate veranda attached to the house is preferable. Photos of transparent structures are presented on this page.

Forms of extensions

Polycarbonate verandas attached to the house can have different configurations:

square, rectangle, polygon, including those with rounded and beveled corners. The roof of the extension can be sloping, gable, or pyramidal. The minimum degree of inclination is 40. Flat roofs they are not made of plastic - snow cannot roll off them;
semicircle with arched roof. The bending radius of the roof must be at least 6 degrees;
circular (a belt around the entire building);
a terrace is an open polycarbonate veranda attached to the house. Summer holiday photos taken on the terrace will be pleasant to view on winter evenings.

The shape of the extension must match the design of the house. A strict building in the Gothic or half-timbered style, surrounded by a transparent semicircular “skirt,” will cause some bewilderment. And on the contrary, the precise and consistent silhouette of the veranda will emphasize character traits classic style.

Properties of polycarbonate

Polycarbonate is a transparent sheet of fiberglass, monolithic or cellular (cellular). For the construction of verandas, material with cells is usually chosen - it is cheaper and more reliable. The sheet consists of two or several thin plates, between which jumpers are built - stiffening ribs. They ensure the strength of the structure.

Main qualities of plastic:

resistance to mechanical stress. The sheet can withstand hammer blows;
transparency. Light transmittance reaches 90%;
light weight. Polycarbonate is 16 times lighter than glass;
flexibility. Heated plastic can be given any complex shape;
fire resistance. The coating begins to melt at 120 degrees;
good sound and heat insulation. Warmth or coolness is retained inside the veranda for a long time;
environmental Safety. Fiberglass, located in the temperature range from -100 to +100 degrees, does not emit any substances or odors;
ease of processing. Thermoplastic can be drilled with a drill, cut with a saw, jigsaw, or grinder. When planning to attach a veranda to a polycarbonate house, choose plastic with a thickness of 10-18 mm.

How to attach a veranda to a polycarbonate house. Photos of construction stages

To attach a veranda to a polycarbonate house, you need a foundation. For light buildings, the foundation is arranged according to a simplified scheme. But this does not mean that the process technology can be violated. The procedure for pouring a strip foundation:

along the perimeter of the designed extension we dig a trench 50 cm deep, 30 cm wide;
We lay a sand cushion 20 cm thick at the bottom of the pit and spill it with water;
pour concrete into the trench, laying it with reinforcement;
let the foundation stand for a month or two. In hot weather concrete surface watered with water and covered with film to avoid cracking;

Frame assembly

Next, a plinth of the required height is laid on the foundation. Its surface is covered with roofing felt and a base beam (with a cross-section of 100×150 mm) is laid horizontally. At the corners 4 high ones are attached to it vertical supports. They are tied with a horizontal beam on top.

Screwed between the upper and lower base vertical racks, with an approximate pitch of 630 mm. The result is a frame that can be sheathed with polycarbonate. All wooden parts buildings are pre-coated with antiseptic, drying oil, or painted oil paint. Using the same technology, you can assemble a box from profile pipe. Such a structure will be much stronger and more durable.

Roof assembly

On the top two parallel load-bearing beams rafters are laid. They can be made from 40 mm thick boards laid on edge. The pitch between the rafters is selected based on the width of the polycarbonate sheet. The joints of the sheets should lie on the rafters. The transverse lathing is made from 20×10 mm boards.

Polycarbonate sheathing

Cellular plastic is cut so that the internal channels are directed downward, towards the ground. This will make it easier to remove dust and condensation. It is necessary to observe the correct orientation of the material - the side with UV protection is placed outward.

The ends of the sheets are covered with a profile or sealed with adhesive tape. Otherwise, internal condensation will sharply reduce the transparency of the plastic. Next, drill holes for self-tapping screws and sew the cut sheets to the frame. The joints are connected using a special split profile.

Fiberglass care

You need to wash polycarbonate with warm soapy water using a soft sponge. It is not recommended to use sharp objects when cleaning - the plastic can be easily scratched. Do not use aggressive detergents, which contain abrasives, alkalis, chlorine. The service life of a polycarbonate veranda is almost unlimited. At proper care the material retains its structure, color and transparency for a long time.

Square country house can be significantly increased by adding a summer veranda to it. This comfortable room can be used as a relaxation room, a mini-greenhouse, it can be equipped with a comfortable space for reading or practicing hobbies. The most simple option is a frame veranda, the walls of which can be made of polycarbonate. This is a lightweight, durable and practical structure that can be built at relatively low cost.

Pros and cons of polycarbonate verandas

Polycarbonate is a relatively new building material that has quickly gained popularity in the field of suburban and country house construction: it is most often used in the construction of greenhouses and greenhouses, as well as in the creation of canopies, canopies and various extensions. Do-it-yourself veranda at the dacha made of polycarbonate - a profitable and inexpensive solution, this material has a whole set of advantages:

However, a do-it-yourself polycarbonate veranda has several disadvantages compared to natural materials. Polycarbonate allows light and heat to pass through, so the room will be too hot if ventilation is not taken care of.

The veranda must have windows, and it is advisable to provide large area glazing so that the space can be quickly ventilated. You can hang large blinds that will block light on a hot afternoon, or install air conditioning in the room.

In addition, the thermal expansion of the material should be taken into account. When heated, the width of the sheets increases by several millimeters, so during installation it is necessary to provide technological gaps.

Types and options of polycarbonate verandas

A veranda for a polycarbonate house can have a very diverse appearance: this applies to the size, location of the walls, and roof. When designing, you need to take into account that the size of the room should not be less than 12 square meters. m, otherwise it will be too tight and inconvenient to use.

Verandas can be built-in or attached: in the first case, they are initially included in the project and erected on a common foundation under the same roof as the main house. Attached veranda it is built after the main house, and it can be located either in front of the entrance or on the side or back of the building.

Polycarbonate allows you to implement the most daring projects; let’s look at some common options:

Foundation design and construction

The first stage of work is drafting: it is necessary to develop general form structures, consider its size and location near the house. Most often, a veranda is built in front of the entrance to a building, replacing a large porch or terrace.

The foundation can be columnar or strip: each option has its advantages. A columnar base will be the most inexpensive and least labor-intensive, but a monolithic belt belt is more reliable and durable. Still for frame veranda The most common solution remains a columnar base.

To create it, you need to clear the site and prepare pits for installation support pillars: they are located along the perimeter of the building at a distance of 1-1.5 meters from each other. The depth of the holes is 70 cm, the side is 50 cm. A 20-centimeter layer of sand and crushed stone is poured onto the bottom of each hole: such a “pillow” will create a solid foundation.

Formwork made of boards is installed around the pits, after which a reinforcement frame is laid in them and concrete mortar is poured. After the concrete has dried, the formwork is dismantled.

If the frame is made of wood, a waterproofing layer of roofing felt must be laid on the foundation, which is attached bitumen mastic. Floor beams are attached to the bottom frame, which can be covered with boards or covered with thick plywood.

Construction of the walls and roof of the veranda

The second stage of construction - construction load-bearing frame. If it is built from metal, the pipes must be primed and painted to protect them from corrosion, the frame elements (bottom trim, vertical posts, top harness) are connected by welding.

If the frame is built from timber, everything wooden elements must be treated with an antiseptic to prevent rotting; they are fastened together with self-tapping screws. It is important to check that all angles and vertical alignment of the posts are correct.

For the construction of the veranda, polycarbonate sheets with a thickness of at least 6-8 mm are used. They need to be cut using special knife or circular saw, cutting sheets can only be done on a hard, flat surface. When slicing, keep in mind that the sheets will expand slightly when heated.

It is necessary to drill holes in the frame for attaching polycarbonate. The holes for the screws should be 2-3 mm larger than their diameter so that thermal expansion occurs without problems. Polycarbonate can be fixed in several ways:

The roof of a polycarbonate veranda is built with your own hands in a similar way: a horizontal beam is attached to the wall of the house, to which the roof frame is connected. It can be pitched or semicircular, it all depends on the project and the desire of the owner.

The frame is sheathed with polycarbonate sheets in the same order. It is important to ensure that the openings are sealed tightly to avoid leakage into the room.

How to make windows in a veranda room

Making polycarbonate windows onto a veranda with your own hands is not as difficult as it might seem. For glazing you can use plastic or wooden frames, both glass and monolithic polycarbonate.

The second option is stronger and more durable, and easier to install. The frame is equipped with transverse elements to which the frames are attached with self-tapping screws; care must be taken to seal the seams.

You can order production and installation panoramic windows, the frames will move to the side. Panoramic glazing will allow for constant ventilation during the warm season, while the room can be easily closed from the cold.

Many country property owners are thinking about creating a terrace. This room is adjacent to the house, where companies gather and relax during the warm season. Previously, brick was used to build verandas. With development construction technologies Polycarbonate comes to the fore. Working with this material is easier and faster, and it allows you to create structures of various configurations.

Types of verandas

There are built-in terraces (they have a common foundation with the house) and attached terraces (located on a separate foundation), as well as open and closed type. Whatever type you prefer, the costs and efforts to build the premises will be insignificant, because the construction of polycarbonate verandas is based on frame system. It simplifies the installation of plastic and reduces the time for marking and assembly.

Thematic material:

If you are planning to build a lightweight canopy, opt for monolithic polycarbonate (MP). This high-strength material is characterized by resistance to impacts, precipitation and wind.

When constructing the frame of an open terrace, a metal profile is used. Polycarbonate sheets are used to glaze the side ends; fabric roller shutters are installed on the façade to protect against adverse weather conditions.

Which roof to choose

As a rule, it is preferable for a polycarbonate terrace pitched roof or a canopy in the form of an arch. Since polymers are flexible, there are no difficulties in working with curved frames.

If you intend to create open terrace, attach a canopy with a transparent roof to the house. Polycarbonate, which transmits light no worse than silicate glass, is ideal for this purpose. This way you will have a great relaxation area.

Design

When developing a plan, you need to provide for all the details that will ensure comfortable conditions being on the veranda. First of all, decide on the level of illumination. Depending on your wishes, you can purchase transparent, corrugated, matte or colored polycarbonate, which reduces the degree of insolation and becomes a design element.

At the design stage, it is worth paying attention to the glazing of the roof and walls: consider the number and location of openable windows (without them, on a hot day, the veranda will turn into a “greenhouse”), consider installing sliding doors.

If a transparent canopy does not suit your preferences, roofing material choose metal tiles, and use polycarbonate for glazing the facade side of the structure. These points are also taken into account during the planning process for building a terrace.

When calculating the parameters of the veranda, remember that this room should not be cramped. The optimal area for a picnic or feast is from 12 square meters. m.

When creating a large multi-functional terrace, consider two-story option. In the upper part you will get a comfortable solarium, and in the lower part there is a shady canopy. To fence the site on the second level, monolithic polycarbonate is used, which is attached to the metal frame of the railing. Outwardly, such a veranda looks weightless, but at the same time it is reliable and durable.

Interesting are the terraces, whose roof and walls are united by arched modules. With their help, multifunctional sliding structures, where the glazing area is controlled by hand movement. At the same time, such models look beautiful thanks to their smooth and graceful lines.

The most labor-intensive process when installing such a structure is installing guides that move the sections. If you approach the issue creatively, then instead of expensive components you can use furniture wheels and a classic aluminum profile. The frame will be bent to the required radius at any metalworking plant.

If your budget allows, you can buy a ready-made arched structure. Assembling it according to factory drawings will not be difficult.

It’s not difficult to make a polycarbonate veranda with your own hands, the main thing is to stick to certain rules. First of all, it is important not to violate the dimensions of the frame (the permissible installation error is 4-5 mm), otherwise the sheets of material will not lie evenly on the purlins.

The standard dimensions of monolithic polycarbonate are 205 cm wide and 305 cm long. They are taken into account when designing the roof, purlins and sheathing.

By adhering to the following parameters, you will create a terrace with the least waste of material.

Make the length and width of the roof equal or multiple (if the parameters of the house allow) to the dimensions of the material. This way you won't have to cut the sheets.
When joining polycarbonate, keep gaps of 5-6 mm.
The minimum roof slope should be 25 degrees, this will prevent snow accumulation in winter period.
The optimal material thickness is 4-6 mm.

A strip foundation is ideal for a house veranda.

Step-by-step construction of a polycarbonate veranda:

It takes 7-14 days for the mixture to harden, after which further work can begin.

Flooring and frame construction

The floor on the veranda can be covered with various materials, the most commonly used are tiles or decking boards. Such coatings have high wear-resistant characteristics.

After finishing the floor, the main components of the structure are assembled, following the sequence of work:

There is no need to tightly fix the jumper profiles, since polycarbonate sheets will be attached between them.

Wall assembly and roof installation

After the frame is completely ready, the base material is installed.

First, the sheets are mounted on profiles adjacent to the wall.
Next, other wall elements are attached, leaving areas for windows, doors and ventilation grilles.
On next stage glaze top part terraces. To do this, install support profiles that serve as the basis for the polycarbonate on the roof, then attach the sheets themselves. If there is a window on the roof, leave space for its installation.
At the end, doors and windows are inserted. For these purposes, metal-plastic products with single-glazed windows are suitable, characterized by their low weight and ease of installation.

The closed veranda is equipped with ventilation grille with closing blades.

Finishing work

At the final stage, polymer gutters are attached to drain rainwater, which extend the life of the polycarbonate terrace.

After finishing construction work It’s worth thinking about the arrangement and design of the room. The veranda is equipped with armchairs, sofas, tables and other furniture for relaxation, decorated with flowerpots with real flowers, and decorated with curtains. Fabric sheets will protect from ultraviolet radiation and add style and completeness to the interior.

These simple recommendations will help every homeowner who does not have special skills and knowledge to build a polycarbonate veranda. Work on the construction of a terrace will not require large financial investments and physical effort. The main thing is to make an accurate calculation and follow the assembly sequence.

For the construction of verandas they are used various materials, including polycarbonate. Polycarbonate verandas attached to the house are practical and functional buildings that all owners of private households want to have.

Availability garden territory requires considerable physical effort from the owner. People living in country cottages feel tired in the evening after garden work and other concerns related to the care of the site, so the veranda becomes ideal place for relax.

But the veranda will not appear on its own; it needs to be built. One of the best materials polycarbonate is used for the construction of verandas; it produces comfortable extensions that are distinguished by their original appearance.

An open polycarbonate veranda attached to a household has several advantages:

protects against dust and precipitation;
opens a good overview;
combines comfort with aesthetics.

Polycarbonate extensions can be made in different styles: fusion, oriental, classic. Verandas look especially impressive when decorated with ornamental plants.

On a note! Large shrubs and other tall plants can serve as walls for an open polycarbonate extension. In such verandas, only the roof is designed from polymers.

Polycarbonate is the best solution for a veranda roof

The main advantages of using polycarbonate sheets in the construction of veranda-type extensions:

The frame of the veranda can be made of wood, and polycarbonate can be used for cladding.

An excellent solution would be to locate the veranda next to the pool: you will create a very nice and cozy place for relax.

In addition to the listed advantages, extensions from polymer material They also look very presentable. Polycarbonate is easy to work with and is affordable, which is why many private homeowners are building two extensions. One veranda can be located close to the main entrance, and the other - with reverse side cottage - used for barbecue.

Polycarbonate veranda projects

Before constructing a polycarbonate veranda, you should prepare a construction project.

Polycarbonate verandas can have an arched, rectangular or rounded configuration. The structure can be built-in, attached or open.

When choosing a project, be guided by personal preferences, but be sure to take into account the structure of the home, climate, soil characteristics and a number of other factors.

Polycarbonate extensions and open verandas are an excellent option for the summer season, but when constructing them, care must be taken to protect them from precipitation, wind and sun. It is not difficult to build such a veranda, and the cost of the finished structure will not hit the budget too much.

To build a polycarbonate veranda, it is necessary to design a reliable floor and strengthen the supports with concrete mortar, and then attach walls and a roof to them.

Having properly organized the work, the owner of the house will be able to build an open veranda within a few days. Most It will take time to create the floor; when using a concrete-based screed, this process will last even longer. Installation of polycarbonate is quick and no special skills are required.

A closed extension has windows and doors - this is what distinguishes it from open version. Such a veranda can be thermally insulated, thereby increasing its functionality and making it suitable for use in winter. If polymer sheets were used to build the extension, window openings are not necessary. sunlight and so it will freely penetrate inside. Window openings are constructed only if dark or colored material is used.

The thermally insulated, closed extension will be cozy even in the winter season.

The built-in extension is planned at the design stage of the home ownership and has a common foundation with the cottage. Several years ago, such structures were standard and looked monotonous, but after polycarbonate appeared, owners of private houses had the opportunity to design polymer structures that had an original appearance. The flexible properties of polycarbonate make it possible to create even round and half-rounded extensions.

Dignity attached structures is that they can be created even after the home ownership is ready. If the cottage was purchased without a veranda, it can be completed later. For such a design, you need to fill a separate base.

Polycarbonate extensions with sliding walls look very unusual.

Configurations and variety of shapes

Verandas and terraces made of polymer material and plastic in an arched configuration look very impressive. The half-rounded transparent roof lets in a large number of light into the room. In winter, such an extension can be used as a greenhouse for growing seedlings. The flexibility of polycarbonate makes it possible to design original arched verandas.

It’s just as easy to build an extension round shape. The disadvantage can only be associated with bulging outer wall, but in such a room it is spacious.

Buildings with square shape, along with rectangular ones, have compact dimensions, and the ease of their construction is achieved due to the absence of convex parts.

Extension with sloping roof looks like an iron. This design is always adjacent to the main building and separates the house and the street. The wall of the household serves as a rigid support, which is a significant advantage for such a building. Additional convenience provide two entrances to the veranda area: from the room and from the street.

Recommendation: when creating an open-type veranda, care should be taken to ensure that the size of the roof significantly exceeds the floor area. This feature in the design of a building it is needed in order to protect the indoor space from heavy rain and dust.

Construction process

How to build a veranda and cover it with polycarbonate sheets with your own hands? This question is relevant for many owners of suburban real estate. Sheathing an extension with polycarbonate is not that difficult; you can handle this task yourself.

The base for the veranda is poured in a standard way, but if it is possible to design a strip-type foundation, be sure to take advantage of it.

The construction of the foundation is carried out in several successive steps, including:

trench preparation;
creation of a sand embankment;
installation of formwork;
laying of reinforcement;
filling concrete mortar.

Considering that the polycarbonate extension is lightweight, a base on stilts can also be used for installation.

The optimal trench width is 25-30 cm, length is 60-80 cm. It takes 7-14 days for the concrete solution to harden. After the base has hardened, you can begin designing the floor. The surface of the foundation is covered with sand and compacted. A small layer of fine-grained crushed stone is laid on top. A mesh of reinforcement is spread over the crushed stone, and wire is used to fasten its fragments.

After this, the screed is poured - it will serve as the basis for the future floor. A presentable appearance is ensured by the floor, which is recommended to be covered terrace board or tiles. These materials belong to the durable category; they give the extension a unique look.

Having finished finishing the floor, you can assemble the main parts of the veranda - the walls and roof.

Look at the drawings demonstrating the design features of polycarbonate verandas attached to private houses.

The photo below shows an approximate drawing of a veranda with a polycarbonate roof:

And this is what a drawing of a frame for an arched veranda looks like:

For construction open veranda adjacent to the house, you can use this diagram:

Step by step construction process:

the lower profiles are attached to the strip base;
special transition corners are mounted between adjacent structural components;
iron profiles are attached to the wall of the household using dowels;
after this, profiles are mounted in the corner parts of the walls and at the top for the roof;
if there are doors in the extension, door profiles are installed;
for elongated structures, intermediate profile elements reinforcing the walls are provided.

The photo above shows the installation process. metal frame for polycarbonate verandas

Installation of roofing, walls, window openings and doors

After the frame is assembled, proceed with the installation of polycarbonate sheets. Assembly should begin from the walls adjacent to the household. After they are installed, the remaining parts of the structure are installed.

Professionals advise leaving space to arrange vent with closing blades. Polycarbonate roofing sheets are reinforced using horizontally positioned profiles. These elements are installed at the stage of frame construction. Such a roof does not need thermal insulation.

Having completed the installation of the roof, fix the profiles going to window openings and doors. In extensions, it is recommended to install windows with one glass unit: they weigh less than structures with several glasses.

At the final stage, the polymer drainage system is installed. Now you can start arranging the interior of the veranda: place a table, comfortable armchairs and a small sofa in the room.

Ideas for arranging the interior of an extension with colorful illustrations can be found in our photo gallery.

Extension in the form of a canopy

Canopies designed from polycarbonate sheets can be used as a veranda. They provide protection from precipitation and sun rays and give the façade of the home a presentable appearance.

It takes a couple of days to build such a canopy (you need to wait until the concrete mortar used to fill the supports hardens).

The advantages of this design are obvious. Reliable polycarbonate sheets can withstand significant loads encountered in winter time due to snow cover. The supports are dug to a meter depth and filled with cement. It takes two days for the concrete to completely harden, after which work can continue.

First of all, monolithic sheets are installed, and fragments are used at the joining areas. Fastening is done using screws and washers. For everyone fastener It is advisable to install a rubber gasket.

A polycarbonate extension that complements the home is cheaper than using glass of identical thickness.

Recommendation: the recesses for fasteners should be slightly larger size bolts If this is not provided for, remember: due to temperature changes, polycarbonate changes in volume, and this causes loosening of fasteners and loosening of the entire building.

Caring for a polycarbonate veranda is not burdensome. Surfaces are cleaned of dirt using a soft sponge or cotton material and warm water with added soap. It is not advisable to use aggressive cleaning agents; they can cause clouding of the sheets of material.

Read about how to build: instructions with stages of work, recommendations for construction, photos with examples and design options.

See photos with examples brick fences for a private house with forged elements.

Video

The polycarbonate extension near the house is the best option for those who want to create a comfortable and cozy place to relax. Walls made of transparent material will provide an opportunity to contemplate the natural landscape at any time of the year. Affordable price on polycarbonate makes this material available to all owners of country houses.