How to design a doorway. DIY decor of old doors DIY decoration of doorways without doors

To increase space, as well as simply for aesthetic purposes, interior partitions remove door blocks. When remodeling an apartment, a free passage is most often created between the hallway and the living room. No less popular is an opening without a door, combining the kitchen with the living room. The expansion of space occurs due to getting rid of the dead zone reserved for opening the sash. However, redevelopment creates new problem related to design doorway without a door, which is sometimes difficult for the owner to solve.

Not every opening in a house can be left without a door. The open passage of a bathroom or pantry will look ridiculous. The kitchen, bedroom and office are considered a secluded area, but for these rooms there is an exception to the rules. To organize intimacy, openings are decorated with curtains, sliding screens and other similar devices. As a result, a visual illusion of separation of rooms is created, while the space remains without a dead zone.

Open passages emphasize the integrity of the living space. All openings are made of the same shape and decorated with material similar in structure to create a single ensemble.

The door leaf is removed when creating an opening between the kitchen and living room or when one of these rooms is connected to the hallway. However, it is advisable to provide visual separation at least with curtains.

If a gas stove is installed in the kitchen, for safety reasons the room will have to be fenced off with at least a sliding system.

Free passage is arranged when combining a hall or kitchen with a balcony. The process involves the simultaneous removal of door and window box. If an office or small bedroom is set up on the balcony, the rooms are separated by curtains or a screen.

When we are not talking about fencing off the kitchen with gas stove, the passage is often decorated with shelves. Climbing flowers, figurines and other elements are placed on decorative shelves.

Getting rid of the door doesn't just open up the space. Air circulates freely through open passages. Even in a small apartment it becomes fresher in summer.

When creating an opening, doors are not required in the following cases:

• A modern solution when performing redevelopment is an interior portal, which allows you to save rectangular shape opening. Without a door, the passage becomes freer, and the decoration from massive decorative elements adds aesthetics.

• Popular are arched passages. In an apartment with high ceilings, they give preference to the classics, arranging the opening in a semicircular configuration. For a building with low ceilings, it is advisable to visually raise the walls with an elliptical arch.

• The door block is abandoned by owners who like passages of the wrong configuration. When designing, asymmetrical arches, triangles, and trapezoids are in demand. A rectangular portal looks beautiful, the corners of which are rounded at different radii. The only drawback is the limited passage size. It will not be possible to create an opening if its width is less than 80 cm.

Doors are abandoned when the passage is decorated with a bar counter, stained glass elements, and mosaic fragments. Often such techniques are appropriate for studio apartments.

Advantages and disadvantages

If you compare a beautifully designed open doorway with a door block, you will be able to identify a number of advantages:

• The integrity of the space of the combined rooms is created. The apartment becomes free, bright, while maintaining the functionality of each zone. The kitchen remains a kitchen, the living room remains a living room.
• When framing the doorway, materials that do not require complex maintenance are used. The absence of a sash eliminates loosening of the frame and the formation of a dead zone.
• Without a door leaf, the opening can be given an original configuration, allowing you to emphasize the interior style of the entire room.
• Decorating an interior portal with even the most expensive materials will be more economical than installing a high-quality door block.

The disadvantage of an open passage is that it cannot be used for storage. With any type of design, a passage without a door is not able to provide intimacy for a specific purpose area.

Free ventilation through open openings will bring great inconvenience when combining a kitchen with living rooms. Smells from cooking, along with fat vapors, will spread throughout the apartment.

Forms

You can design the opening while maintaining the original configuration or modify the passage. Often the shape of the structure depends on the materials used for finishing. Important role plays the skill of the master.

Of all the types of doorways, the simplest option is the classic rectangular shape. An inexperienced person can assemble such a structure. To create an opening, remove the entire door block along with the frame. The ends of the walls are trimmed along the contour decorative cladding. If it is difficult to dismantle the hatch, you can remove only one flap. Cover the remaining frame elements with MDF or plastic. The disadvantage of this method is the narrowing of the doorway due to the remaining elements of the frame.

In the case of arched openings selection of forms huge:

• Considered a classic semicircular arch. The transition is suitable when combining any rooms. If the apartment has low ceilings, it is better to abandon the semicircular arch or widen the passage.

• Arches trapezoidal the forms are easier to manufacture, suitable for apartments with low ceilings, and are often installed when combining a kitchen with a living space. However, designers rarely use the trapezoid due to its association with the shape of ritual accessories.

• Fans of unusual configurations prefer triangular arches The design has many subtypes, more suitable for spacious rooms with high ceilings.

Modern apartments are increasingly equipped with doorways asymmetrical forms. The structure is easier to make from plasterboard. For registration use LED backlight, arrange niches, shelves and other decorative elements. Asymmetrical designs make it possible to hide large defects in the passage and the interior partition itself.

How to decorate a doorway?

When decorating an opening without a door, almost any material used for wall decoration is suitable. Budget option is a plasterboard construction followed by painting or wallpapering. It is optimal to choose gypsum boards when manufacturing a device of an asymmetrical shape. Plastic or MDF will be cheap.

From more expensive materials Artificial stone, tiles, and valuable wood species are used to decorate the doorway. The pinnacle of art is the design of a passage with stucco.

When choosing the option of finishing a doorway without a door, you need to take into account the style of the entire room. The design should harmoniously fit the passage into the interior, and not highlight it with a separate structure.

There are two types of portals in the apartment: full - with a top and side elements, double-sided - only side edges without a top. Similarly, they provide for the installation of a threshold and platbands or abandon these elements.

Installation of slopes and plasterboard arches

If you decide to create a doorway without a door with your own hands in the shape of an arch, it is better to use drywall for decoration. The sheets are inexpensive, easy to cut and install. When making an arch, a frame is assembled from a galvanized profile. The structures give the shape of the future opening. The frame is sheathed with fragments cut from gypsum board sheets. Fixation occurs with self-tapping screws. The finished arch is treated with a primer, a perforated corner is glued, putty is applied, and after drying it is sanded.

If there is no desire to build an arch, the slopes are simply lined with plasterboard. To further refine the doorway, use water-based paint or glue wallpaper.

How to decorate a doorway with stone?

The finishing of the portal with decorative stone looks stylish. The material is made from natural chips with the addition of coloring pigments and polymers. When framing an opening, smooth boundaries are rarely adhered to. Most often, preference is given to torn edges. To aesthetically decorate a doorway indoors, use a stone with a small, almost smooth relief pattern. Elements with deep texture create a bulky design. They are used to decorate entrance door openings from the street side.

Decorative stone cuts well, but for corners it is better to use ready-made corner elements. Installation is carried out using tile adhesive or liquid nails.

Finishing with additions and platbands

It will be possible to simply and tastefully decorate a rectangular doorway made in the form of slats. The elements are made of wood, MDF or plastic. The latter look less aesthetically pleasing.

Made from MDF, there are regular ones, with an edge at the end, and telescopic ones. In the first version, the edge of the bar is without decorative covering. You need to fit the joints tightly. Extensions with edges have a finished look. The end is sealed decorative film and in case of flaws, the joints look presentable.

They are produced in flat, rounded and other shapes. Wooden planks can be decorated with carvings. The elements are installed using glue, nails or self-tapping screws. Telescopic platbands are secured with a lock to a pre-fixed strip.

Finishing the interior doorway with MDF

MDF panels will make a beautiful and inexpensive finish for the portal, but trims are also selected from a similar material. The disadvantage of cladding is the fear of dampness. MDF is better do not use to design a passage connecting the kitchen to the living space. If there is a good exhaust system above the stove, then the material is not at risk of dampness.

To sheathe a doorway with MDF, first build a frame from wooden slats. The panels are cut to size and secured with special metal clips. The planks are joined together lock connection"tenon and groove".

MDF panels without locks are placed on adhesive solutions. The frame is not being built. To glue the planks, prepare a perfectly flat surface. The joints are covered with a decorative strip, and the edges of the passage are framed with platbands.

Decorating a doorway with plastic

The principle of decorating an opening with plastic is reminiscent of finishing MDF panels. Only the material is different. PVC plastic panels are fixed to the frame with fastening clips or glued. The completion of the frame is a platband made of a similar material, attached to the guide strip.

PVC panels trim doorway rectangular, semicircular and other configurations. Stores sell ready-made kits for cladding arches; you just need to select the product according to the size of the passage.

Advantages of polyurethane stucco molding

Gypsum stucco is rarely used due to its fragility and heavy weight. If in an apartment high ceilings, and Venetian or another similar style is chosen for decoration, then the decor of doorways is carried out with polyurethane elements. The material is non-fragile, lightweight, and can be painted.

To install such stucco molding, prepare a flat, durable surface. Pre-treatment with primer deep penetration. Elements are fastened glue mixture. After the glue has hardened, the joints are puttied and then sanded with sandpaper.

Wood finishing

Lovers natural materials they prefer a portal made of wood, lined with extensions and platbands. When making a door portal with your own hands, you can even use cheap pine wood. After good sanding, treatment with protective impregnations and painting with varnish, the material will be difficult to distinguish from wood valuable species. You can decorate the wooden portal of a doorway with carved ornaments.

The elements are being installed on the frame. First, level planks are attached to the slopes, then platbands are installed. The doorway lining is fixed with self-tapping screws. The caps are recessed into drilled secret holes, and the top is rubbed with putty. I glue the platbands and secure them with nails or self-tapping screws.

Decoration with curtains

A simple option to decorate doorways without a door is to hang curtains. The whole process consists of fixing the cornice over the passage. Curtains will hide the opening without a door from view, distract attention, and will not clutter up the space. The main requirement is not to use curtains with horizontal opening. They will become an obstacle to free passage. It is optimal to use curtains for doorways with vertical closure. When open, the curtains are tied to the wall.

If you make every effort, you can decorate a free interior passage better than a door block. If expensive materials are used, it is advisable to take advice from experts so that the costs are not in vain.

When all renovation work are carried out independently, then the processes of door cladding are done by hand. Many materials allow you to update the door leaf very cheaply and at the same time with high quality and for a long time. Some of the most popular materials are self-adhesive wallpaper and film. Today I will tell you how to glue doors yourself and what properties and advantages the materials used to create openings have.

Advantages of film and its gluing to surfaces

Representing polymer material, self-adhesive film consists of PVC on the back side of which an adhesive is applied. It is because of this that the film received its name and became very popular for use on many surfaces. Before you cover your doors with film, you should know all the advantages:

• With some strength and wear resistance, the film can withstand minor mechanical damage and scratches
• The film can not only decorate the door, but also renew it after a long period of use.
• Easy installation allows you to do all the work yourself
• Convenience of choice - thanks to various textures or colors, you can choose the materials used for cladding doors in any interior design
• It helps hide small defects that doors may have.
• The film is very easy to care for - just wipe it with a damp cloth
• Does not change color when exposed to ultraviolet rays
• It has moisture-resistant properties - thanks to this it can be used not only for interior doors, but also for surfaces in the kitchen or bathroom
• Low cost of self-adhesive materials - thanks to this, the film has become universally available
• Does not damage the base

Since at that time I was living in a rented apartment and did not plan to be there long time, there was simply no point in purchasing new doors or kitchen furniture. But I still wanted to improve the external condition, so I decided to update the surfaces with this self-adhesive film. In order to glue the door leaf with your own hands, you should stock up on the following materials:

1. Ruler, meter and pencil - they are used to take the necessary measurements
2. Scissors or a stationery knife - allows you to cut the self-adhesive material into the necessary pieces
3. Soft spatula – used for smoothing during veneering
4. Hairdryer - helps to shape corners and protrusions on the surface

Updating a doorway is very simple and just follow this sequence:

• The door, like any other surface, should be prepared. The base should not have greasy stains or be dirty. It is also necessary to remove all roughness and burrs. But if you decide to update the varnished canvas, then everything is simple, just smooth out all the unevenness using fine-grained sandpaper
• When the materials are purchased, the surface is prepared, all that remains is to apply the film. The necessary markings are easy to apply to the film thanks to the markings on the reverse side. Subsequently, the materials are glued to wooden and other surfaces and smoothed with a soft spatula.

Important! If bubbles remain after finishing with self-adhesive film, you need to pierce them with a small needle and smooth out the swelling.

Wallpaper in the design of the opening

Wallpaper in the design of the opening

Very often wallpaper is used to decorate a doorway. They can be used to highlight a passage or, conversely, to hide this place and make it less noticeable.

Paper wallpaper is suitable for lining openings, however, although it is resistant to moisture, it still has short term services. Therefore, it is better to decorate surfaces with such wallpaper for temporary use. Wallpaper tends to fade in the sun and therefore soon loses its attractiveness. appearance. But if pasting occurs acrylic wallpaper, then the service life will increase significantly, and the surface will “breathe”. The design will be similar to vinyl, but unfortunately, less durable.

Important! There are also self-adhesive wallpapers; they can be used for covering various substrates. However, self-adhesive wallpaper is not so popular due to its low strength.

If you want a quality upgrade wooden surfaces wallpaper, then choose vinyl materials. They are more durable, moisture resistant and have a huge number of tint solutions. You can even choose a picture printed on vinyl trellises and thereby perfectly decorate the partition between rooms.

Varnish for decorating old substrates

Very often in order to update old wooden doors They do not use self-adhesive films, but varnish coating. Wooden canvases lose their attractiveness over time, dry out and require renewal. If you decide to varnish, then carefully prepare the surface and select the mixture.

Using varnish is a labor-intensive process, but it can transform old wood into a work of art. With the help of such impregnations, even nondescript pine can become like an expensive type of wood. You should not save when purchasing varnish - only high-quality material will exceed your expectations. Varnish should be coated with at least 4-5 layers. Before applying each next layer, you need to sand and polish the previous one.

For independent work stock up on the following tools:

1. Wood varnish
2. Roller and brush for hard-to-reach places
3. Rag and spatula along with putty
4. Construction hair dryer
5. Sandpaper of different grits

Before varnishing, you should prepare the base and remove the old paint layer from it. After that, all irregularities are sanded and covered with putty. Before applying varnish, surfaces should be treated with various impregnations that will protect them from mold and bark beetles. If you want to reduce the amount of varnish consumed, then prime the base, which will not only improve adhesion, but also reduce the consumption of the mixture.

Results

The use of self-adhesive film is in great demand when updating old surfaces and bases. Thanks to a huge number advantages, the film can be used even in rooms with high humidity. However, before use you should know several disadvantages that it has. this material: if the work was carried out poorly, then over time the canvas will begin to move away from the base; preliminary preparation is necessary for the film, since the material cannot hide large flaws. The film can only be used once and after its dismantling it becomes unusable. Consider all the little things in advance and only then start decorating with your own hands.

One of the main elements of the interior is the doorway, the design of which requires compliance with certain mandatory requirements. First of all, this relates to the proportionality of its dimensions. Standard door sizes do not always look proportional to the wall.

Often there is a need to change these dimensions in one direction or another.

Second an important condition is the correspondence of the design of the entrance to the room with the general style. Moreover, this is required in relation to both adjacent rooms. Often the doorway acts as a unifying element that connects interiors.

This is especially important if there is no padding door leaf. There are many options for creating a beautiful and interesting doorway design; you can see photos of some solutions on our website.

Decorating doorways: how to decorate, refine and decorate an arched opening of an interior door

The decoration of the entrance to any room greatly affects its perception.

After all, the entrance to the room is the first thing that greets the person who enters it. In addition, this allows you to add originality to even a completely ordinary layout at minimal cost.

Moreover, each type of premises has its own rules, for example, the design of a doorway without a door is possible for invitation-type premises: living room, kitchen, corridor. A bedroom, a children's room, or an office require a door to create isolation.

One of the most common options for finishing interior doors is the use of various types of arches.

The frame of the arched opening is usually chosen to be semi-circular, although there are other types of this architectural element. For classic interiors, oblique, flat, elliptical and three-centered arches are well suited, and for an interior in an oriental or eco style - keeled, lancet and three-lobed.

However, an ordinary rectangular opening can be beautifully decorated.

Portals from natural wood or MDF. It is possible to use other finishing materials: natural and artificial stone, stucco. The choice of finishing materials and finishing technologies depends on the style in which the interior is designed, the selected furniture and the presence of other decorative elements.

Facing and decorating the doorway of the front door with your own hands: how to beautifully decorate the doorway?

Special requirements apply to the framing of the doorway entering a house or apartment.

It is from the entrance that one begins to get acquainted with any house, and its design largely determines what impression one gets both of it and of its owners. That is why it is necessary to carefully consider how the design of the front door will look.

To create an unusual, memorable design, it is not necessary to resort to the services of professionals.

Original solutions for decorating a doorway in the interior: types and methods of decoration

Many people are quite capable of thinking through and creating the decor of a doorway with their own hands. All that is required for this is to show imagination when developing your own design option, as well as accuracy when performing the work.

If you have problems finding a creative solution, you can study the photo already completed projects and use their ideas when developing your own design.

You can try to combine several options, the main thing is to achieve organic combination all elements, their shapes, textures and colors.

This technique allows you to create original solutions that will give a unique look to any home.

We design the doorway correctly

An unusual solution for the design of a doorway

So, no to doors! The decision has been made, all that remains is to decide how to design the doorway - so that it is both practical and tasteful.

Very original solution will be finishing doorways decorative stone. Firstly, the price for this material is more than affordable - the purchase will not make a gaping hole in your budget. Secondly, working with decorative stone is more than simple - it can be cut perfectly even with an ordinary hacksaw, so you do not need special skills or special tools.

And finally, thirdly, decorative stone allows you to create the most unusual shapes– if your door portal is non-standard, you will not have any problems.

By the way, the original decorative stone will be appropriate even if the opening is made of plasterboard - there is probably no more universal solution.

How to properly decorate a doorway with stone?

If the interior of your apartment is designed in a country style, you should give preference to large stones - for example, you can design a doorway so that it looks like the entrance to a cave.

This arch would look great in the hallway. If the doorway big size, crushed stone would be appropriate - give the room a special sophistication and grandeur.

As already mentioned, the workflow itself with artificial stone extremely simple:

• Prepare stones according to the size of the doorway.

  The most convenient way to do this is with a grinder.

• Attach a special mesh to the surface.
• Apply a special solution to it. Please note that the layer thickness should not exceed 1.5 centimeters.
• Then start laying the stone - first the corner elements, then the main ones.
• Fill the joints with cement mortar and then level them.
• Finally, sand the seams.

  That's it, the job is finished!

• After about 48 hours, the solution will finally dry out - you can call your household members, who will certainly appreciate your efforts.

Decorating a doorway with textile curtains

Often, the doorway is simply covered with wallpaper, since people don’t really want to bother with a full-fledged finish. But, as practice shows, this gets boring very quickly.

And the best way out in this situation would be to decorate the doorway with curtains.

The most common option is textile curtains. When choosing the right ones, you need to take into account the general style of the room, including textiles - the color of sofa upholstery and carpeting. The shape of the curtains can be very different - symmetrical on both sides, tacked on one edge or asymmetrical, depending on your preferences.

Most often, a rectangular opening is designed in this way.

How to make the opening original? Bamboo curtains

If you are fans oriental style, it’s worth taking a closer look at bamboo curtains for the doorway. They not only emphasize the special atmosphere in the room, but also perfectly hide from prying eyes. And movement between rooms will be absolutely free - such curtains are thin bamboo sticks strung on strong threads.

Such curtains come in a variety of colors and sizes - they allow you to bring to life the most daring ideas for decorating a doorway.

How to decorate a doorway with a stained glass arch?

If you decide to design a doorway without a door, then the most obvious solution for you will be arches.

There are several types of arches - when choosing, consider general interior premises and your personal preferences. But if you want something unusual, give preference to a stained glass arch, and your room will become even more original.

Stained glass arches are most often used to decorate a doorway in the kitchen or hallway. The arch design is made in the form of a stained glass window, and its base is most often plaster. In order to install such an arch, no special skills are required - all fastenings, as well as decorative overlays, are included in the kit.

These finishing options look more than original!

How to decorate a doorway with wood?

Today, the design of arches with wood comes in two types: semicircular and pointed arches. The arches look just great, but you will have to tinker a little with their installation - in addition to the arch itself, you will need glued blocks, which will become intermediate nodes.

The elements of the arch are fixed with self-tapping screws, and the arch is coated with a special decorative varnish.

If your door size was non-standard, you will have to order such an arch from a carpentry shop.

True, this also has its advantages - you will be absolutely sure that your home will be unique and unique, and the design of the doorways in your home will be the most original, and the wooden frame will be perceived as a real decoration!

How can you make an arch of a non-standard shape?

The most unusual arches are, of course, plasterboard ones.

And this is understandable, because drywall allows you to create the most bizarre shapes. If you want, make an arch in your apartment square, semicircular, wavy, voluminous - there are simply no limits to your imagination. Although, of course, in this case you will need certain skills in working with drywall, because creating such an arch is not so easy.

First, you need to decide on the shape of the arch - carefully measure the doorway, and now the arched opening, be sure to draw a diagram on paper.

Then prepare the drywall properly - cut out the pieces the right size. Fix the fasteners firmly on the wall and proceed with the installation of the structure itself. Once the arch is ready, you can begin finishing. What it will be is up to you to decide. Drywall can be covered with wallpaper, painted, plastered, finished with artificial stone, built in Spotlights. In a word, drywall is great opportunity create a real miracle with your own hands!

More questions on your topic:

leave a comment

Builder's Dictionary:: Repair questions:: Calculators:: Special equipment:: Miscellaneous

2006 - 2017 © user agreement:: contact with the site administration [email protected]

Designing a doorway without a door

Door arches and portals

An arched opening, a door portal, an arch - whatever they call an interior arch, which is essentially a replacement for an ordinary door.

Where insulation of rooms is not needed, but a conditional delimiter of functional zones is needed, an arch is installed in the opening.

Today there is a wide variety of arched designs that will fit into any interior and will follow the style and trends. Interior arches, depending on the type of vault, are of the following types:

Classic is the most common interior arch with a vault in the form of a semicircle.

The radius of curvature is equal to ½ the width of the doorway.

The interior portal is a simple, laconic rectangular arch into the doorway.

Arches with a semicircular or elliptical vault and rectangular door portals are the most common design options. There are other forms that are not so popular.

A trapezoid, as the name suggests, has a trapezoid-shaped arch. Romance - has a rectangular vault with rounded corners. Ellipse and modern are arches intermediate between classic and portal, with different radii of curvature. Semi-arch is an asymmetrical product with different designs corners of the arch.

The design of a doorway in the form of an arch or door portal should take into account the height of the ceilings of the premises, so that such an element of the interior fits harmoniously and justifies the design decisions.

Interior arches

What they look like in the interior interior arches and portals?

How to decorate a doorway?

Weapons production in an apartment: Photography

The production of arcuate holes has been used for a long time and is often one of the design style features. Therefore, when planning an apartment renovation where you need to turn the door into a hole, you must move on to choosing your design, materials and finishes.

1. Purpose of the arch
2. Design Types
3. Variety of styles

Purpose of the arch

A bow is a way of connecting two rooms; its appearance should be connected and be a continuation of the interior of each of them.

There are many styles of decoration, in apartments for decorating photos in the apartment you can see different decor options.

Design Types

To increase comfort in small apartments in Khrushchev, they often move barriers between rooms or completely destroy them.

One way to enhance the layout and create an impressive appearance is to enlarge the door and create a unique bow.

This discovery can change the perception of space, make it unrecognizable, decorate and emphasize the chosen style.

And if the doors are separated from each other, isolate the rooms, then the vaulted design, on the contrary, combines the rooms, makes the interior lighter, elevated, elegant and decorated in a classic style, the Empire can add splendor and help.

In cases where it is necessary to close corridors between spaces, there are various solutions.

Modern industrial options allow the production of doors of various shapes, including the size and configuration of the opening, the use of sliding, folding models;

In some cases, you can easily hang matching curtains.

There are many ways to create bows. It is not difficult to choose the suitable option that is available for installation by your own hands.

For using arcs made of natural and decorative stone, brick and aluminum profile, plastic and MDF boards.

Structures of any shape or complexity are made from plasterboard.

This versatile material can easily create high-quality smooth or semicircular surfaces, with decorative cutouts, reliefs, built-in shelves, lighting, and additional finishing elements.

It can be supplemented with wood, stone, tiles or simply plastered, adapted to decorative rolling materials, such as film, wallpaper.

In addition to the design of the openings located at the interface between adjacent rooms, there are decorative arches.

They are designed to decorate rooms, which gives them some characteristics.

Variety of styles

Process proper construction, completing discoveries in a certain style is quite complex; it requires special skills and knowledge.

Among the most popular types are the classic or Roman bows.

Their main characteristic is a semicircular appearance with a clearly defined radius of the right arc.

The design has no additional protrusions or asymmetrical parts and is suitable for large areas with high ceilings.

Decorations are elements that are part of the chosen style. These include: plaster, frieze, painted parts, gilding, light painting.

The loki in the spacious hall is complemented by decoration in the form of columns and half-columns.

Arches in Art Nouveau or English style. Their specialty is cutting a radius, the arc has a slightly modified straightened shape, rounded corners.

These varieties are suitable for large halls, as well as for installation in corridors with low ceilings.

Slavic type.

The holes are rectangular with hinged corners. Use these options in all spaces where they are combined with other decorative elements.

Semi-arctic or Thai.

We decorate the kitchen door without using doors: examples from designers

They are often used to create an unusual original model in different spaces.

They found ways to align corners and make page radii.

Most popular look. The arches are rectangular in shape with various types finishing.

Some of the samples are real works of art, decorated with stucco, stained glass, and flowers.

This design is similar to the gantry version, with distinct smooth edges and rounded, angled edges.

Tears. This is the decoration of a rectangular hole in the form of an additive, while increasing the penetration of light into the room, this is an internal fitting.

Modern materials provide unlimited possibilities for creating bows of different models: elliptical, asymmetrical, curved lines, non-standard shapes.

In any case, the use of the ark will make the apartment unusual, unlike others, decorate the interior, and become its accent.

Also read: Decorating an arc with decorative stone, Combination of kitchen and living room

How to decorate doorways

Originally designed doorways will enliven an existing interior, give it individuality and novelty, by the way, order high-quality interior design in Sevastopol.

You can decorate the doorway either with your own hands or hire specialists.

First, you should decide in which room the opening will be made - in all of them or just in one, for example, in the living room, because we usually invite friends, relatives and guests to this particular room.

There are two options for decorating an opening: decorating an existing opening with a door, changing the opening - turning it into an arch (redevelopment)

1. First option registration will take a minimum of time and money - you can try to do it yourself.

   To do this you need to purchase decorative polyurethane moldings and stick them on. The choice of moldings in specialized stores is huge; you just need to choose what suits your interior style.

2. Second option– creating an arch from plasterboard. A more costly method in terms of money and time. The advantage is that now modern companies offering repair services can provide several options for sketches of arches that match your interior.

   You choose best option for themselves, and experienced workers begin making the arch. This will save time and effort and can guarantee excellent result, since there are many options for decorating doorways with plasterboard.

   Decorative glass, for example, photo printing, stained glass, will help complement the beautiful opening.

By transforming, decorating, doorways you will get a cozy, updated room.

How to design a doorway: framing, ennobling and designing a doorway without a door

Thanks to the interesting design, your interior will be unusual, unique, and stylish.

• Dismantling door frame With the services of a reliable repair company in St. Petersburg, you can quickly dismantle the door frame and carry out preparatory work for the installation of new doors.
• Brief instructions for making a wooden arch with your own hands Creating in an apartment or house modern interior, it is necessary to select the appropriate type of interior openings.

  For those who are bored with the usual openings, there is another option - these are arches,

• Creating an entrance arch with your own hands Entrance arches have been used to decorate houses for many thousands of years. Triumphal arches were built in honor of heroes, but now this decorative element used to decorate houses and apartments and create
• We build an arched opening from plasterboard with our own hands. It is possible to build an arch from plasterboard even with your own hands, without involving craftsmen.

  Drywall is a material that allows the production of complex building forms. An arch created from plasterboard

• Themselves “with a mustache”, removing old door from the opening, we decided to decorate it with an arch. The U-shaped doorway was sewn up at the corners on both sides with pieces of chipboard and decorated with self-adhesive wood-like material.

The design of the entrance door slopes is the final touch with which the interior will be complete. Also, finishing the door slopes will help improve heat and sound insulation.

This is what the front door looks like before finishing the inside of the slopes.

The photo shows hanging wires, an uneven concrete opening, peeling wallpaper, and fastening plates sticking out. Slopes for entrance doors will correct the situation.

This is what the doors look like after installing the trims and platbands.

Design of a doorway without a door. This way you can refine the doorway.

There are many different options for finishing entrance door slopes.

For example, finishing with plastic PVC panels, MDF panels, plasterboard with subsequent painting or wallpapering, plastering of slopes, laminate, chipboard, additional boards and platbands. Each finishing method has advantages and disadvantages.

The most universal are extensions and platbands. These are modern and high quality materials. There is a large selection of colors, they are durable, do not deform, and do not require additional plastering of walls or wallpapering.

Original design of a doorway without a door

As a rule, entrance door panels on the inside are finished with veneer, PVC film, eco-veneer or laminated, as well as extensions and trims lined with veneer, PVC film, eco-veneer and laminated. Extensions and trims for interior doors are made on the basis of MDF, chipboard and solid wood. Platbands are standard and telescopic, semicircular and straight.

Decorative finishing of the entrance door with extensions and platbands in the color of the door.

Price for installing slopes for entrance doors in Moscow

HOW TO ORDER INSTALLATION OF SLOPES

Extensions and trims for metal entrance doors. Finishing of entrance door slopes.

Installation of extensions and platbands on interior doors, correction of poor-quality door installation.

Master of Architecture, graduated from Samara State University of Architecture and Civil Engineering. 11 years of experience in design and construction.

One of the common options visual increase spaces in the room - this is the dismantling of interior doors. This solution allows you to visually expand the premises and create a single space in the interior. In this case, an important task arises - finishing the doorway. In this article we have collected the most popular and non-trivial ways to solve this issue.

Preparing the opening

The process of preparing the work surface varies due to the materials chosen as finishing.

Types of finishing materials

The choice of materials for finishing a doorway on the construction market is extensive; there are both economy-class options and expensive alternatives. Everything depends directly on the needs, desires and capabilities of buyers, as well as several important aspects:

• you should not skimp on the quantity and quality of fastening elements (for example, if you make a sheathing from wooden blocks, you need to check them for the presence of mold, rot and large cracks);
• when purchasing materials packaged in different boxes, you should check the delivery batches; if they differ, then the shade of the contents may also differ;
• durability of the material, its ability to withstand daily contact with various external influences- this is what all masters should think about first.

Using the example of the most popular options for finishing a doorway, we will consider in more detail the workflow for each of them.

Plaster

This option can be called the most popular due to the simplicity of the work and the practicality of using the finishing material.

The only thing you should take care of before starting finishing is to cover the floor with film or newspapers so as not to damage or contaminate the surface.

1. Work begins with preparing the opening: removing old materials and priming the surface.
2. Installation of beacons (you should mix a little mortar and fix the perforated corners on the walls, aligning them to the building level).
3. A masonry reinforcing mesh is attached between the corners.
4. The building mixture is prepared in the required quantity.
5. Using several spatulas, the mixture is applied to the walls in a chaotic manner, after which it is smoothed over the surface using a rule.

It is important to remember that the thickness of one layer should not exceed 2 cm, otherwise voids or cracks may form, and this will negatively affect the durability of the finish.

If everything is observed, all you have to do is wait until the surface is dry, and you can proceed to finishing: painting, wallpapering or applying decorative mixtures.

Clinker tiles, mosaic

This material is intended for cladding a variety of areas of a residential building, including the doorway. There are no special installation rules; options are offered depending on the interior design:

Covering a doorway with tiles or mosaics does not require any special tools or special skills; the work process consists of step-by-step actions:

1. after the surfaces have been cleaned and plastered, it is necessary to apply markings according to which the tiles will be located in the doorway;
2. prepare special glue (liquid nails are used only in cases where the surface is perfectly flat);
3. apply glue with a spatula to reverse side tiles, distribute it over the surface, remove excess;
4. Press the tile against the wall and hold it for a few seconds, applying force.

To ensure that the products are fixed evenly on the surface of the opening, you should prepare plastic beads in advance, which are inserted into the seams between the tiles. It is removed after the adhesive mass has hardened, no earlier than 24 hours later.

It is very important that if glue gets on the surface of the tile, it should be removed immediately, since the hardened mass is very difficult to remove.

When the opening is completely ennobled, the seams between the tiles are sealed with special grouts, the color of which is matched to the tone of the walls or finishing materials.

Decorative rock

Another option that is used as an alternative to clinker tiles is decorative stone. It has several advantages over other finishing materials:

• an exact imitation of natural rocks, while there are a lot of varieties of textures: marble, limestone, jasper, brick, cut wood and many others.
• tolerates high humidity without consequences;
• easy to care for, because does not require application special means to remove dirt from the surface;
• resistant to mechanical damage if installation rules are followed.

The installation process is very similar to laying clinker tiles, but there are several important points, which should not be forgotten:

• depending on the thickness, the weight of the products may vary, which may increase the consumption of the adhesive mass;
• acquiring finishing material, inspect several pieces with back side, if there are many pores on the surface, they have a low density, which will affect the strength of the stone.

This finishing material comes in two types:

1. Natural. Made from natural rocks crushed into crumbs. Such products are distinguished by their heaviness and strength under direct mechanical influences.
2. Artificial. It is based on gypsum, to which dyes and polymers are added. The main advantage is the low price, which fluctuates around 300-800 rubles per square meter.

Wooden panels, MDF

An equally popular option for finishing door slopes are wooden or MDF panels laminated to resemble wood, which harmoniously fit into the classic style. The advantages include:

• aesthetics;
• durability;
• no visible defects upon contact with water.

The process of installing panels made of wood or MDF will require you to purchase additional materials - wooden slats that will be used as sheathing:

1. The slats are cut to fit the width of the opening and attached to the walls using dowels and screws.
2. The panels are also adjusted to fit the opening with a small indentation, to hide which an end corner is used.
3. The starter panel is secured with finishing nails.
4. All subsequent panels are attached through a tongue and groove (connection system present on the products).
5. From the end, the structure is closed with a side panel - a platband, which is attached with nails to the sheathing or with an end angle.

Photo instructions for finishing the opening with MDF panels

To hide the fasteners, you can use special furniture wax or adhesive plugs, matching them to the color of the panels.

This finish will look rich, even if inexpensive MDF panels with a textured pattern imitating exotic wood were used.

Laminate

Many finishers love laminate for its flexibility, which allows this material to cover almost any openings, corners and nooks found in residential premises. The only thing worth worrying about is that it does not tolerate moisture well and after contact with water, swelling may form at the ends of the products, and such defects cannot be eliminated.

The laminate is attached using self-tapping screws to the sheathing in the same way as finishing with PVC or MDF panels.

If the walls are relatively smooth, then you can use liquid nails and spacers, which will press the material to the surface of the walls for several hours.

Stucco molding – gypsum and polyurethane foam

One of the most interesting, but in its own way capricious materials is stucco. When using it in the interior to decorate a door opening, you should maintain a single concept of the overall design, fit it into the style of columns, pilasters with capitals and other similar decorative elements.

The stucco molding on the opening should be combined with other interior elements, for example with floor and ceiling plinths

There are two types of stucco on the construction market:

1. Plaster. It is impossible to imagine interiors without it country houses, made in Venetian or classical style. But in small apartments such products seem too bulky, interior openings narrow not only visually, but also actually. Plus, gypsum is a very heavy and fragile material; under mechanical stress it will not last long.
2. Artificial, or rather polyurethane, is an affordable analogue of gypsum.

The advantages of polyurethane foam decor also include:

• ease of construction;
• ease of installation: products are easy to cut stationery knife and are attached to liquid nails;
• variety of ready-made forms;
• The polyurethane surface is suitable for painting.

Stucco molding looks ideal in the frame of a doorway with an arch, especially if the width allows the erection of monolithic column supports along the edges.

Doorway shapes

Finishing openings between rooms without a door is complicated not only by the choice of material used, but also by what shape this very opening will be.

The solution to this issue will affect the harmony of the transition between rooms, the lighting of the rooms, the combination of styles in the interior and the practicality of movement.

Rectangular

A common option is rectangular. Such an opening remains immediately after dismantling the door frame and it has its advantages:

• suitable for all finishing materials;
• no additional structures are required;
• clearly delineates two living spaces, for example, a balcony and a kitchen, while visually expanding both;
• great for modern styles interior design.

A wide rectangular opening allows the slopes to be used as niches for interior items

Arched

The arch has an interesting ability: in rooms with low ceilings it visually raises them, and in cases with high ceilings, on the contrary, it lowers them. Moreover, the wider the arch-shaped opening, the lower the ceiling appears.

Many people prefer this option for its softness and lack of sharp corners, which makes transitions between rooms more invisible. The arch fits perfectly when exiting the hall; if it is wide enough, the movement between rooms will be imperceptible.

The absence of massive doorway decor emphasizes the beauty and complexity of the rest of the interior

A nice addition are ready-made solutions– arched-type extensions prepared for installation in doorways.

Extensions and developed edging of the opening emphasize the complex shape of the opening, placing a visual emphasis on it

Trapezoidal

This form is used very rarely, due to the fact that in small areas such a solution gives reverse effect: the room does not expand, and the ceiling visually lowers. Especially in cases where the upper horizontal part of the trapezoid is too narrow. It may seem that when decorating the opening they wanted to make an arch, but did not have enough strength and skills.

Such an opening looks good when it matches the shape of the room located behind it, as in this picture

The polygon will fit well into the passage where double-leaf interior doors were planned or installed. Using drywall, you can easily and effortlessly turn a rectangular opening into a smooth trapezoid by securing it at the corners of the opening.

Asymmetric

A doorway that embodies the fantasies of the owners of a living space is an asymmetrical shape. Designers love it for its ability to bring the most amazing solutions to life. The opening ceases to be the boundary of two rooms, it turns into a decoration of the apartment, into an element that attracts the eye and emphasizes the given style.

An asymmetrical opening is the highlight of any interior

However, there are nuances here that many people forget about and encounter difficulties during the work process:

• you cannot undertake the expansion of the opening without creating a project where all the possibilities of load-bearing walls and ceilings will be taken into account;
• sharp corners and sharp shapes have a negative impact psychological impact on others; it is necessary to minimize the presence of irritating factors so that ennobled openings serve as an advantage and not a disadvantage.

Decoration with curtains

A simple but very interesting option for decorating a doorway with curtains is a look into the past. Several decades ago, people demarcated their living space in this way, decorating the passage with wooden or fabric curtains. The desired effect was achieved: the boundaries of the room were visually outlined, without creating a closed space.

Curtain - a simple and effective solution

But similar solutions are still popular now, but the variety of shapes and materials has become much greater. The most commonly used are bamboo sticks, which are very durable and produce a pleasant sound when colliding with each other. You can paint them yourself in the desired shade or choose a ready-made option to suit your interior.

You can use curtains anywhere, even on the border between the hallway and the bathroom, although this is a little intimate, but if home owners are interested in this option, then why not experiment.