How to attach horizontal blinds to a wall. Installation, repair and maintenance of horizontal blinds

You can attach blinds to a plastic window using two various options. Let's look at the advantages and disadvantages of different mounting methods and find out how to hang blinds with your own hands.

For some interior planning cases, blinds may be preferable to curtains. Their main advantage is the ability to regulate the light output. All you need to do for this is to rotate the slats to a larger or smaller angle relative to the surface of the window. There are two main methods used to attach blinds. Let's analyze their advantages and find out. How to attach them with your own hands.

How to take measurements correctly

First of all, the blinds must be correct size. To do this, you need to decide on the method of fastening. Methods can be divided into two groups:

If you plan to install blinds on several windows, you should measure each opening separately. Although it seems that the window openings are exactly the same, this is not always true. A discrepancy of 2-3 cm can lead to consequences that are difficult to eliminate.

If you plan to install vertical design, it is necessary to measure the height and width of the window opening. You should be careful when measuring, since you can shorten too long lamellas, but add additional elements narrow blinds will be problematic.

If the model has horizontal lamellas, the measurements will be somewhat more complex. If the blinds are attached to the opening, you need to determine what the width and height are. The length of the canvas is selected at your own discretion. You can find both models that reach the window sill, as well as long options that reach the floor. If necessary, blinds with plastic or aluminum slats are not difficult to make shorter.

When installing directly on the frame, you will need to consider whether the window will open.

If the window is solid and does not open, you can measure the entire width of the opening. If the shutters will open, it is worth ordering a separate structure for each half of the window. Measurements should also be taken accordingly. Measure the parameters of the glass (width x height) and add 20 mm on top and 5 mm on the edges.

When designing blinds attached directly to the frame, make sure that they will not interfere with the operation of the fittings and will not become an insurmountable obstacle to its maintenance (lubrication, adjustment, etc.)

Preparatory work

So, the mounting method has been determined, the blinds have been selected, ordered, manufactured and delivered to the apartment. What to do next? Before you start attaching the blinds to the window, it is worth doing some preparatory work.

First of all, you need to unpack ready product, carefully untangle all the cords, without leaving the slightest knot, and examine the finished product. According to the attached instructions, you must carefully check the completeness, make sure that all structural elements are in place and look exactly as in the instructions.

If at the packaging stage something is mixed up or not included in the box, the blinds will not be installed. It is better to immediately file a complaint with the manufacturer than to look for a replacement or improvise, trying to do without the missing part.

You also need to prepare the window itself. You need to remove all unnecessary items from it. It is worth protecting the window sill and the nearest meters of floor with newspapers from dust and the inevitable debris when drilling. It's also worth making sure you have reliable support for legs (stepladder or sawhorse), so that the drill cord allows you to reach all drilling points.

Preparatory work when attaching blinds is not complicated and does not take much time. But if all these operations are not done on time, the installation process can take a significant amount of time and require a lot of labor.

No drilling

Modern plastic double glazed windows allow you to install blinds without using an electric drill. There may be several reasons for choosing this mounting method. For example, under the terms of the lease agreement, it is prohibited to carry out such manipulations in rented housing. Other reasons may be the lack of the necessary power tools, reluctance to tinker with drilling or spoil the surroundings.

First of all, it is worth considering that fasteners without the use of drills and screws are usually less reliable. This means that only lightweight structures can be secured in place in this way.

Usually the lamellas in them are arranged horizontally and are made of thin and light polymer. For heavier models, it is still worth choosing a fastening method using self-tapping screws. You can usually find out whether the selected model can be hung without drilling from the included instructions.

To work, you will need double-sided adhesive tape and scissors. The operating procedure is as follows:

The last stage of installation is attaching the adjustment strips to the block and installing the slats in place. The reliability of the fastening allows the blinds (provided that the model is not too heavy) to hang in place for several years without distortion or separation from the attachment point. However, when cleaning (removing dust from records), you must act carefully so as not to tear off the structure.

If you eventually need to remove tape-mounted blinds, this is quite easy to do. A special liquid (for example, Anti-Scotch composition) will help remove traces of glue.

But if you don’t have a professional solvent at hand, you can use a rag soaked in WD-40 or vegetable oil.

Required materials and tools

Now let's look at fastening with self-tapping screws. It's much more universal option, which allows you to hang almost any model using any mounting method (on the ceiling, in an opening or on the walls).

First of all, you should pay attention to the quality of the fastening elements included with the blinds. Sometimes manufacturers (this statement especially applies to cheap Chinese-made models) include too short and thin self-tapping screws made of low-quality steel. If you plan to attach heavy structures to the ceiling, it may be worth purchasing something more reliable.

Also for work you will need:

Measuring tool: pencil, ruler with bubble level, roulette.
Drill. The drill bit for the drill is usually #6.
Dowel and hammer.
Brackets for mounting (usually included with the product).
Scissors.
Screwdriver.

Having prepared a set of tools for work, you can begin.

How to hang blinds on plastic windows with your own hands. Step-by-step instruction

The installation process usually does not cause any difficulties even for those who do this work for the first time. We will look at the operations for installing vertical blinds. Here are the main operations that need to be performed:

First of all, mark up. The brackets are usually mounted at a distance of 90 - 100 mm from the cornice. Mark the holes for the brackets with a pencil and drill them.
Insert plastic dowels into the holes. Insert the self-tapping screws into the holes in the bracket and screw them into the dowels.
Install the curtain rod with the fixed decorative panels on the brackets.
The runners are assembled according to the instructions provided. You need to attach the canvas to them and thread them into the cornice.
Weights are inserted into the lower part of the canvases. A decorative chain is attached to them.
Stoppers are inserted into the ends of the cornice and covered with decorative plugs.

The installation of horizontal blinds differs slightly. The main difference is greater sensitivity to strict adherence to horizontal installation.

After assembly, it is important to carefully check the operation of all elements of the system (make sure that you can open and close the blinds, and also change the angle of rotation).

Here are some tips from professional installers:

Before purchasing, make sure that the kit includes the necessary brackets. For some companies, the price of the kit includes only the canvas, and fastening and adjusting structures must be purchased separately.
If defects are found, you do not need to try to fix them yourself. Contact the manufacturer for replacement or repair.

The main thing in any work is accuracy and adherence to technology. If you do everything correctly, you can hang the blinds with your own hands, quickly and without much difficulty.

These days, blinds have gained considerable popularity - they are installed both in private homes and in offices. Most often, the installation of systems is carried out by specialists, but installing blinds on a plastic window with your own hands is also quite possible and does not even require any special skills or tools. These curtains can be installed in several ways, the choice of which depends on the interior and functionality.

Varieties

Today, construction stores offer several types of blinds. Depending on the specific type The features of fastening curtains change.

You can find several varieties of horizontal blinds on sale. The lamellas in them are installed horizontally, which explains the name of the design. The thickness, width and type of material can be customized. The structure can be attached inside the frame, to the frame itself, to the slope or on top of the window block.

Horizontal blinds are most often installed in institutions

These blinds are installed in offices, production facilities and other places. These designs are universal - if desired, you can find horizontal blinds in almost any color and shade.

Due to their design features, such blinds are most often mounted on top of windows.. The slats in this case are oriented vertically and are made of plastic or fabric. There are varieties on the market that differ in the length of the slats.

Vertical blinds Mainly installed in residential areas

This model is most often installed in private homes, but they are also in demand in offices. Installation of vertical blinds is carried out using self-tapping screws. As alternative option Mounting to the ceiling is practiced.

Roller blinds are made of fabric, completely cover the glass, and if desired, they can be raised by rolling them into a roll. Installation is carried out using brackets, screws or adhesive tape.

Roller blinds can be installed without drilling walls and sashes - on double sided tape

The need for drilling varies depending on the type:

Vertical structures are mounted on top of the window or under the ceiling. In both cases you will have to drill the surface.
Horizontal blinds can be attached to the top slope or to the window sashes. Without drilling, such structures can be mounted on the sashes of a window block.
The interframe analogue, as you can easily guess from the name, is designed for installation inside the window itself. This option requires drilling the largest number of holes.

Preparation and measurements

To install blinds you will need the following tools:

screwdriver or screwdriver;
pencil or marker;
roulette.

To ensure that all your efforts are not in vain, it is important to carry out the measurements correctly and accurately - only then will the design work effectively. In addition, it must be located absolutely symmetrically to the glass unit. Blinds attached with adhesive tape are more tolerant of errors - they can be corrected if desired. For analogues with self-tapping screws, additional holes will need to be made, which is unlikely to benefit the beauty of the window; flaws here are unacceptable.

At the first stage of installing blinds, measure the width and height of the window

To correctly position the structure relative to the window and floor level, you will need to measure the following parameters:

window opening dimensions;
length to the bottom edge of the curtain;
distance between fasteners.

For horizontal blinds installed on sashes, you will need to additionally measure the dimensions of each glass. To the results obtained, add 2 cm to the top and bottom edges and 0.5 cm to the sides.

Installation of vertical blinds

Installing vertical blinds isn't really like that. difficult process, as it may seem initially, and everyone can cope with this task. If the length of the curtain is short, then installation is carried out inside the window opening. Otherwise, the structure is installed under the ceiling or on the wall.

The algorithm of actions here is as follows:

Installation of chain and lamellas. After attaching the cornice, all that remains is to hang the slats, install the runners, and also attach the adjusting chain. An important point: the slats must be hung in the same order in which they are in the box. Otherwise, you can ruin the entire drawing (if there is one).

Installation of horizontal blinds

Attaching horizontal blinds to plastic windows somewhat more complicated. The main thing is to strictly follow the instructions:

The first step is to secure the upper fasteners. This is done using a screwdriver. First, the holes are prepared, after which the bracket is attached with self-tapping screws.
We hang the cornice. It should be fastened until it clicks.
The holes for the lower fasteners are drilled by hand. When choosing a diameter, you should take into account the dimensions of the thread retainer connecting the lamellas. Most often, horizontal blinds require additional holes on the sides. This helps to insert the clamp connected to the lamella fabric into the corners.

When installing horizontal blinds yourself, you must carefully follow the instructions.

Important: self-installation must be done as carefully as possible. Very often the slightest mistake results in the entire structure not functioning correctly..

In the case of roller blinds, there are several mounting options, so before you start, you should choose the most convenient one. The first is installation on self-tapping screws, which in essence is no different from the option described above, the second is on a special adhesive tape, which is used instead of self-tapping screws, and in the third, the roller blind is hung on the sash.

To fix roller blinds, use brackets or adhesive tape

Important: do not forget about degreasing the plastic - it will help significantly improve the adhesion of materials.

Inter-frame curtains

Inter-frame curtains are used only for double frames. Installation of blinds of this type is somewhat more complicated than the previous ones, and the process itself will result in an inevitable violation of the integrity of the profile: you will have to drill at least two holes through which the handle and cord to control the system will be cut out.

The curtains themselves are mounted in the inner sash, or rather in its top part, and the bracket - directly to the upper profile. Installing a structure is in many ways similar to working with horizontal blinds.

Inter-frame curtains are installed in double glazing

Do-it-yourself installation of the system is carried out according to the following algorithm:

The window frame unwinds and the blinds are applied to the inner sash. This is used to check the size matches.
Markings are made for fastening, as well as points for the cord and control handle, after which holes with a diameter of about 5 mm are drilled.
The brackets are inserted into the calipers, the cords and control handles are brought out, with the cord through the lower hole.
Inter-frame blinds are mounted on the sash with special inter-frame brackets.
An adapter is installed on the frame, and a control handle is connected to the flexible terminal.
The control handle and cord lock is installed.
The frame twists back.

The blind control element is led out through the frame

As you can see, the technology of installing blinds on plastic windows without drilling is completely unsuitable here. The principle itself is similar to the installation of all other design options, with the only difference being that you have to disassemble the frame, screw the bracket into the interframe space, and remove the controls through the drilled holes.

So that the blinds can serve for a long time for long years, you should follow some operating rules:

When purchasing, you should carefully check the package and all equipment, especially fasteners. They must be of high quality.
You should choose the adjustment mechanism wisely - it should be on the side that is convenient for use.
Make sure that no one opens the windows while the blinds are not yet fully closed.
The rotary handle must not interfere with or touch other fittings.
Don't forget about periodic maintenance.
It is quite possible to install blinds on windows yourself, but it is better to entrust its repair to a professional.
Plastic structures are preferable: they are much easier to care for.
You should not clean the system too often, this will only lead to rapid wear of the protective layer.

Installing the device yourself, as you can see, is not a difficult task at all, be it metal, plastic or wooden blinds on plastic windows. The main thing is to have quality instructions at hand. Thanks to this material, you can hang your blinds as quickly and efficiently as possible.

Just 10-20 years ago there was no choice of window coverings - only massive curtains and curtains were hung on the windows. Progress does not stand still, and in last years new species appear window curtains. The most popular now are blinds. In apartments you can often see a combination of blinds + Roman blinds and blinds + curtain. This method of curtaining protects the home from the sun, street noise and can decorate the window. Increasingly, instead of heavy curtains and blinds, compact ones are used in everyday life. roller blinds and blinds. They are much better suited to metal-plastic window frames. They are used in both offices and residential premises.

Types of blinds

Designers bring to life a variety of solutions that have no analogues. There are the following types blinds:

plastic;
wooden;
fabric.

Installing blinds on a plastic window is a job that requires preparation. The installation process will depend on the type and shape of this product. Note that blinds are classified according to their shape:

Horizontal.
Vertical.
Rolled.

Horizontal ones are most suitable for living spaces. They do not take up space under the windows and can be mounted both inside and outside the sash. Can be combined with curtains different sizes and styles.

Vertical blinds look better in office premises. Their peculiarity is that they can be attached directly to the ceiling. They can visually increase the space and are suitable for rooms with low ceilings.

Roller blinds have a wide palette of colors and can decorate any room. Made from fabric, they are easiest to clean from dust and dirt. There are several ways to attach them.

In the CIS, you can most often find blinds made in China, Belarus and Russia in stores. Since the majority of the population has plastic windows, especially in cities, it is necessary to study information on how to install them correctly. Let's consider several options for how to attach them to windows with your own hands, so as not to damage the window structures.

Standard installation of blinds on plastic windows

Blinds can be attached different ways. It can be:

installation by drilling;
using double-sided tape;
using magnets;
using brackets.

When purchasing, instructions are included on how to hang blinds on plastic windows yourself. Mostly advice is given on how to install them by drilling windows. In this case, the fastening is carried out to the window frame above the double-glazed window. You need to carefully study the instructions and carefully take measurements.

Installation of blinds is carried out in the following ways:

into the opening of a plastic window;
onlay;
for each half of the window separately.

Important! Before purchasing blinds for two window halves, make sure that the lifting mechanism is on the left and right sides. Otherwise, the cords from different halves will interfere with each other.

Installing blinds on windows using drilling is not suitable if you plan to change the type of curtain. After drilling, marks will remain on the window profile, and this will be noticeable. The blinds are attached with screws and this moment This is the most reliable type of fastening.

Let's take a closer look at how to hang horizontal blinds on windows. The process can be divided into the following stages:

We retreat 5-6 cm on both sides and mark the location for attaching the blinds. At this stage, you need to measure the distance very accurately, since if there is an error of even a couple of millimeters, your blinds will hang askew and will soon fail.
We make holes for the brackets with a screwdriver, paying attention to whether the window sash will open or not. If the window will open, then the hole is made in the upper part of the window sash; if it is blind, then on the outside.
After inserting the blinds into the brackets, just snap them into place.
On the side of the sash you need to make a hole for the latch.
Check how the mechanism works and whether it is comfortable for you.

Vertical blinds are a little easier to install; the following procedures should be followed:

We make markings for the brackets, retreating 10 cm from the edge of the cornice.
We drill holes and insert dowels into them. After this we fix the brackets.
We install the fasteners together with the slats on the cornice.
We assemble the runners, fasten them into the canvas, and then attach weights to the bottom of the slats.
You can check the operation of vertical blinds.

The brackets can be glued with double-sided tape if you do not want to spoil the window profile. If after drilling the window there are excess holes left, they can always be removed with acrylic sealant.

If you purchased roller blinds, you can use another installation method to install them.

Alternative types of installation

It is not necessary to drill into the window to attach the blind base. There are other options for attaching blinds to windows. To install roller blinds you will need the following tools:

Double-sided tape;
liquid Nails;
scissors;
ruler or level.

Roller blinds are a smooth canvas that can be rolled up, raised or lowered using a special mechanism. Roller blinds do an excellent job of protecting from scorching sun rays, while at the same time decorating the living space. Let's look at how to install roller blinds on plastic windows. This type of curtains is attached separately to each window sash. Roller blinds come in several types, and the mounting method for each type may vary.

The Mini roller system is a classic roller blind on a compact shaft. They can be easily installed on individual plastic window sashes. The fasteners are attached without drilling, and thanks to this the frame remains intact. To prevent the fabric from sagging, the bottom metal strip should be fixed using special magnetic holders. The window sash can be opened in any way.

Roller cassette curtains are roller blinds that are assembled into a cornice that looks like a compact cassette. This type of curtain is suitable for flaps, plastic or aluminum. The most popular curtain options are the Rollite and Uni systems. Models of these designs include strips for double-sided tape. Using these strips, the guides are glued to the window sash.

Cassette blinds are controlled by a single chain, with the help of which the height of the curtain is adjusted. On window frame a special clamp is installed that keeps the chain from sagging when the window is ventilated.

Isotra and Isolite systems are also popular. A plastic window with this type of blinds can be used in any mode without fear of breaking the system. Fastening is carried out using glazing beads, in which small holes will need to be made. If such glazing beads become damaged, they can be easily and quickly replaced at any time.

Interestingly, the method of attaching blinds to the wall is still used. This type of installation does not harm the plastic window; you just need to take the correct measurements.

Marking before installation

In the question of how to hang blinds on plastic windows, one of the main points is the correct measurements of the window and the design of the blinds. You need to take measurements before going to the store. The main thing is to comply optimal distance along the edges of the markings, armed with a ruler and pencil. It’s even better to mark it on the window itself with a pencil using a level; in this case, you don’t need to rely on your personal feelings and measure by eye. The fasteners must be marked symmetrically on all sides. When installed inside a window opening, our design should not reach 3 cm. When installed on top of the window, it should protrude no more than 5 cm at the edges. The height should be 3-4 cm higher. It is necessary to ensure that the blinds do not extend beyond the boundaries of the glass.

It happens that the mounting plates do not fit tightly to the window profile. In this case, special shims are used, which, depending on the gap, are used in different quantities– from one to four pieces.

You need to measure the height and width of the window along the light opening to the edge sealing rubber bands. Then measure the depth of the bead from the glass to the outer surface of the profile. It is necessary to take into account the availability window fittings, so that it does not interfere with the operation of the blinds. If you take incorrect measurements, unnecessary sunlight will shine through the cracks in the blinds.

To attach horizontal blinds made of plastic, the Holis and Magnum system is used.

Before installing blinds, you need to prepare window openings. They must be smooth and clean. Ideally, they need to be degreased.

Remember, with the slightest error in measurements and installation of fasteners, there is a great risk of damaging both the windows and the structures themselves. Installing blinds with your own hands should be treated with greater care and attention, as this is a very painstaking job.

How to choose blinds

When choosing blinds for your apartment, you need to carefully select the material, color and texture in order to harmoniously fit this type of curtain into the living space. If you have a glazed balcony, then plastic or aluminum blinds will be the only right solution for balcony windows.

An important advantage of blinds is their compactness, heat and sound insulation. When using this type of curtain, your window sill is freed up. You can save a lot on energy consumption, since blinds protect your living space from excess sunlight and warmth. In summer, the air conditioner will operate in a more economical mode. Now you can purchase structures not only from plastic and aluminum, but from bamboo and wood.

Vertical blinds are often treated with special dust-repellent solutions. This design can be rolled up and washed in washing machine or with your hands.

Enough interesting view for interior decoration for pleated curtains. Pleated blinds are made from pleated fabric and are attached directly to the window. These curtains are closed using a cord.

The most refined and expensive look wooden blinds. Wooden plates do not rattle, have a natural structure, protect the room from light and do not heat up. They enhance the room and fit into any interior, suitable for both offices and bedrooms. They are made from Canadian linden and balsa wood varieties.

You can also choose multi-textured blinds - a combination of plastic and fabric. Vertical plastic blinds they are made curly, because of this the entire room is filled with various reflections of light. They look like curtains made of airy fabrics.

A new product on the market is photo blinds. Any design can be applied to the white slats, and when the blinds are opened you can admire the beautiful picture.

Japanese curtains are a combination of several fabric panels made of fabric or plastic. They move along the cornice with different guides and can move and slide apart.

You can always change the look of your windows by buying new blinds - and you have a new room without renovation. Carefully choose the color of the curtains, paying attention to the colors of the furniture in the room.

You can install vertical blinds yourself if you follow step by step instructions installations. It is also important to know how to care for blinds and what types are intended for which windows.

Kinds

Vertical blinds are divided into the following types: classic, inclined, corrugated, arched, day-night and accordion. When installing vertical curtains, it is important to know which type is suitable for which window and interior:

Classic. Made from fabric, paper or plastic. Designed to darken the room, protect against heating sun rays, zoning the interior space of the room.

Oblique. A type of pleated specifically for windows that are located at an angle in the attic or ceiling. Their peculiarity is a specific assembly system, which does not allow the canvas made of any material to sag when at an angle. Mostly inclined models are produced with electronic control.

Corrugated. This type is a vertical and horizontal double pleat. As a result, the folds look smoother, neater and denser. A corrugated model made of plastic and paper in this design absorbs significant part heat and protects the room from bright light.

Arched. Maximum flexibility fabric sheets, which take any shape, like a paper fan. Good decision for rooms with non-standard form windows (arches, trapezoids, triangles, beveled windows).

"Day Night". The canvas of such blinds consists of two layers of fabric: light, permeable a large number of light fabric for daytime use and dense, dark fabric for protection from the bright sun during the day and prying eyes in the evening.

Harmonic. The design consists of a control mechanism (chain or electric drive), weights, and pleated fabric that resembles accordion bellows. The range of materials, colors and textures is very diverse.

Peculiarities

This product has a number of distinctive features:

They can be closed from top to bottom (classic canvases), from bottom to top, or from both sides at the same time. At the same time, the degree of density of the “accordion” can be adjusted: by closing either the top, or the bottom, or central part window.
Suitable for covering irregularly shaped windows.
Optimal solution for attic, attic, ceiling and inclined windows.
When opened, the canvas is compactly folded and hidden inside the cornice.
Convenient for installation on all types of windows.
Various ways fastenings and control mechanisms (manual and electric).
The woven fabric is washable.
The curtain fabric can be made of two types of fabric at the same time, which makes it possible to regulate the degree of transparency, darkness, and sun protection.
Easy installation can be done by yourself.

Advantages

The following are distinguished:

Compactness. Blinds occupy a minimum of space, allowing owners to show their imagination and organize additional window decoration or leave the window sill as a functional surface.
Simple and clear type of control.
Long term services. Special impregnation protects the canvas from dust, grease, dirt, moisture, and abrasion.
Ease of hygiene procedures. Not required special care. Their small surface area can be simply wiped with a damp sponge. soap solution once every few months.
A variety of designs for interiors in any style.
The tight fit of the canvas to the surface of the glass protects equally well from heat and cold.
Possibility to install the system yourself.
A variety of materials: from light window decoration to total blackout protection.
Possibility to combine blinds with curtains, tulle, lambrequin.

Required Tools

To install vertical curtains, you don't need many tools. You will need: a stepladder, a set of screws from the kit, building level and drawing supplies, drill, screwdriver.

The following will definitely come in handy: a bracket for the ceiling and for the groover, fasteners, corners, clamps, monofilament, stoppers and c-clips, rings for the rod, chain locks, replacement parts. Each instruction contains a detailed list of required components.

How to take a measurement

The final result depends on how correctly the measurements are taken. Even expensive ones beautiful models will not look good on the window if there are gaps in the opening or the edges of the slats are constantly rubbing against the wall.

It is important to pay attention to the following points:

For the most accurate indicators, a steel tape measure is used.
The obtained figures cannot be rounded; accuracy must be maintained to the nearest millimeter.
When ordering blinds, the width parameter is indicated first, length – second.
Not a single window opening is absolutely perfect. geometric shapes, therefore measurements in height and width must be made at least at two points.

When installing in a window opening, you need to determine the width at the top of the arch and subtract 20 mm. To determine the height, compare the height of the left and right side arches, subtract 1 cm from the smaller value. For wall mounting, you need to add at least 10 cm to the wide side of the slope. The length of the slats can be any, but it is recommended to retreat 2 cm from the edge of the blinds to the floor. Ceiling installation implies determining the height (to the floor or window sill) minus 2 cm, it is recommended to increase the width of the arch by 100+ mm.

Mounting options for plastic windows

There are several mounting options: with and without screws.

With self-tapping screws:

It is necessary to mark the places where they will be located.
Then make holes and attach the brackets.
Secure the blinds.
Also make two holes on the bottom.
Secure the ends of the blinds with plugs.

Without self-tapping screws. First of all, you need to mount the curtain, assemble the brackets and install them on the reel. Then this structure must be fixed on the window in order to mark for fastening. The second step is to attach the brackets with adhesive tape at the top of the frame and the string tensioner at the bottom. It is not necessary to pre-attach them with tape, but it is advisable to eliminate problems with subsequent drilling of holes for screws. After installing the guide string, the curtain itself is mounted into the mechanisms.

How to care

Due to the peculiarities of their composition, the materials from which blinds are made do not require special care. Once a month, such curtains can be dry cleaned, and once every few months - wet cleaned. A good addition will be treated with sprays against burnout, exposure to moisture and dust.

If necessary, you can wash such blinds using a gentle wash cycle or by hand.

How to properly attach to the ceiling

Vertical curtains are attached in three ways: to the ceiling, to the frame with drilling, to the frame without drilling.

In all cases, the fastener is a cornice with decorative facade or without it. The brackets on which the structure is supported are fastened with self-tapping screws, hung or glued with double-sided tape. Special tape seems rather impractical, however, it is fixed very firmly, so it is important to correctly mark for installing the brackets. Once they are glued, moving them will be quite difficult.

The procedure for installing vertical blinds:

Preparing tools.
Applying pencil markings for installing brackets. To securely fix the fasteners, it is recommended to drill holes for self-tapping screws at the same stage.
Attaching the brackets in a suitable way(with or without drilling).
Installation of cornice.
Installation of slats. To do this, you need to pull the control cord, with the fastenings for the slats located on it, so that they are in the desired position.
Then fix all the slats on the hooks of the fasteners.

Wall mounting

Installation work Wall decoration requires certain skills and experience; it is necessary to take into account some nuances and features. Installation of blinds begins long before preparing the working surface and a set of tools:

The first step of this process is an informed decision regarding the type and variety of blinds, material, color and texture, depending on the functionality of the room.
Second important point- this is the correct marking. Much, if not everything, depends on it, including how easy the installation process will be. If all the features of the architecture window openings will be taken into account by specialists when ordering blinds from them, everything will go easily and smoothly without the help of professional installers.
It is also important to consider whether it will be possible to open the window after installation, how the light protection devices will work, and whether there is a risk of deformation for them.
Installation of blinds. It must be done exactly with markings and subsequent verification of the functionality of the structure. The most important point here is the choice between fastening with drilling and fastening without it.

How to hang on the balcony

To install, you must follow these steps:

Degrease the areas of the balcony and fasteners that will be connected with adhesive tape.
Install blinds.
Assemble the brackets.
Mark the mounting brackets. To do this, you need to attach the brackets to the assembled blinds, install them on the window without fastening, mark with a pencil the places for the adhesive tape, and remove the curtains.
Install the string guide against sagging. Attach to the “ear” of the top bracket and weighting of the curtain, and fix at the bottom in the tensioner, which is installed on the frame.

In order for the blinds on the window to serve for a long time, it is important to know how to install horizontal blinds correctly, in accordance with the technology. Although this task does not seem to be such a difficult process at first glance, there are many nuances that must be taken into account when installation work Oh. If you are not completely sure that you can handle the fastening yourself, contact a specialist.

Necessary tools and preparation

The first thing you need to decide on is the installation method. Installation of horizontal blinds can be done in a window opening, on a frame, to a wall or ceiling. The method of fastening depends on how the measurements were taken. If the overall dimensions of the product are larger than the window opening, then it will need to be mounted on the opening. In this case, you need to decide whether they will be attached to the wall or to the ceiling. If the product is the size of a window, fit into the window opening.

Installation requires the following tools:

roulette;
crosshead screwdriver;
pencil;
screwdriver;
screws, dowels and brackets.

Before starting installation work, it is necessary to carry out appropriate markings.

Marking requires special precision, since it is very important that the blinds do not interfere with the operation of the window, and the operation of the window sashes does not interfere with the blinds.

Return to contents

Fastening technology

After preparatory work You can proceed to installation of the product. It is necessary to drill holes using a screwdriver and insert dowels into them in accordance with the markings made. After this, you can begin attaching the brackets with self-tapping screws.

It is necessary to unfold and assemble the device in accordance with overall dimensions Mark with a pencil the places where the brackets are attached. It should be taken into account that the bracket should not get into the place where the clamp or control system is attached. The distance between the brackets should be about 60 cm.

As a rule, the product is mounted on 2 brackets, but when large sizes For reliability and to reduce the load, it is better to attach an additional bracket. It should also be installed near the control mechanism, since this is where the device is subjected to the greatest load.

The brackets are designed in such a way that the upper cornice simply snaps into place. The product must be fully assembled before attaching it to the brackets. Having firmly secured the top bar in the bracket, turn its latch counterclockwise until it stops. In a similar way, the product is attached both to the wall and to the ceiling or upper slopes. The only difference is in the method of mounting the brackets. They have holes for both types, horizontally located holes for mounting to the wall and vertically located - to the ceiling or upper slope. After installation, you should check the operation of the mechanism.

If you want to mount the product directly on the frame of a plastic window close to the double-glazed window, you must use fasteners specifically for PVC windows. In this case it does not work effective area windows and windowsill. The blinds fit tightly to the sash and open with it. For this option it is best installation is suitable without drilling.