How to make a table out of paper? Origami table Table made of colored paper.

How to make a table out of paper? This question is asked by many parents whose children ask them to make their doll furniture.

Paper is one of the the best materials for these purposes. Firstly, this material does not require any cost or effort: you do not have to fiddle with a hammer and nails, as you would with wood, or polish the material to avoid splinters. Secondly, the paper is absolutely harmless. You don't have to worry about harmful plastic not decomposing. Thirdly, paper products can be thrown away if necessary.

If you don't get the product right the first time, throw it away and start over. In the case of other materials, any mistake can be decisive. Fourthly, you can make not just a table, but also a whole puppet theater.

Let's try to make a table for dolls out of paper with our own hands. For this we need thick cardboard, paper, matchboxes, PVA glue and paint. We will glue the matchboxes together in such a way that nothing will prevent them from moving out. Then we cover the finished product with paper to prepare the surface for painting.

Do not forget that the retractable parts should not be smeared with glue.

After this, you can color the paper. We make small handles from cardboard, which we attach to retractable boxes. The chest of drawers with pull-out shelves is ready. Your paper or plastic doll will be delighted.

Option 1:

For the manufacture of doll chest of drawers you will need 2 matchboxes Glue the outer parts, for reliability you can fasten them with clothespins until the glue dries
Cover the outside with wrapping paper and decorate. Glue wooden bead legs Decorate the inner drawers with applique and buttons (dresser handles)

Option 2:

Photo 1 Photo 2 Photo 3
Photo 4 Photo 5

You can make a chest of drawers for a child out of cardboard with your own hands:

Step 1. Using a stationery knife, cut the side and back walls to your size. Step 2. We make each part in 2 copies and glue them together with “Titan” glue.
Step 3. Place the load Step 5. Assemble finished design
Step 6. Glue all the ends and edges with paper. Step 7. Glue the walls of the box together. One part is smaller by the width of the corrugation
Step 8. Assembling the boxes Step 9. Covering with paper
Step 10. Paint with acrylic paint Step 11. For better glide, cover the bottom of the box with self-adhesive
Step 12. We cover the inside of the boxes with wrapping paper or cloth. Step 13. Screw the handles
This is such a roomy chest of drawers

Table made of cardboard and plastic

If you are planning to make a paper theater, first of all take care not of its actors, but of the environment. For everyday scenes, you need to know how to make a chair. Let's get to work. Draw a layout on paper, carefully draw all the elements. Draw in life-size, focusing on the parameters of the characters who will inhabit your theater. We cut out the finished “patterns” and glue them onto cardboard.

Please note that the cardboard should be thin but strong enough.

If you want to add density to the product, you need to stock up on plastic that hardens in air. We glue all the elements of the future chair together. We knead the plastic in our hands and make several small pieces out of it. Place them in water and leave for a couple of hours. Mix the soaked plastic and pass it through a sieve. note that ready mix should have a consistency similar to sour cream. Cover the chair with plastic and leave to dry. If necessary, the entire theater can be coated with it so that it is denser and more resistant to wind if performances take place on outdoors. To make the products dry faster, you can use a hairdryer.

As you can see, you can make not only a theater with your own hands, but also interior items. The finished craft will delight your kids.

When a child gets a doll, pretty soon every child begins to think about arranging a home for it. At modern development Toy production in the store for your favorite doll you can buy almost any furniture or a whole house at once. However, it will be much more fun to decorate everything with handmade items. This does not require any special skills or expensive materials, such as plywood, wood, metal or plastic. You can simply arm yourself with glue, scissors and paper. We will look at how to make paper furniture for dolls in this article.

How to make doll furniture from paper

Today there are many ways to make paper furniture. Each of them has its own advantages and disadvantages. Here are the most famous of them.

• Origami technique.
• Manufacturing of furniture according to drawings.
• Gluing according to color schemes.
• Weaving from paper strips or tubes.
• Using matchboxes as a “building” material.
• Manufacturing furniture from corrugated cardboard.
• Painted furniture.
• Production of paper furniture from combined materials.
• Papier-mâché furniture.

Although all these techniques are different, they use the same material - paper and its derivative cardboard. Whichever of them is chosen, one rule remains the same for all: making doll furniture requires special care and attention, because this is almost jewelry work.

Requirements for paper for toy furniture

When considering the question of how to make paper furniture for dolls with your own hands, it is worth remembering that each manufacturing method has certain requirements for paper.

Almost all of the above methods require thick paper from 90 g/m2. It should bend well and not delaminate at the bend. However, for origami, paper is needed that is less dense, capable of withstanding repeated folding and maintaining a beautiful appearance.

The same requirements apply to cardboard. By the way, to make furniture from it, you can use both regular stationery cardboard and corrugated packaging cardboard.

If doll furniture is made using papier-mâché or weaving, the quality consumables Old newspapers or magazines work great.

How to make paper furniture with your own hands: origami

The simplest method of making furniture, which does not require special skills, materials, and most importantly time, is origami (the art of folding paper figures).

All you need is a square sheet of paper and a diagram of how to fold it correctly. No glue or scissors are needed for origami (unless, of course, it is a modular subtype).

When making doll furniture in this way, you should first practice on paper from a math notebook (it will be easier to fold because of the squares). And, having mastered this technique, make a table, chair or something else from special paper.

Schemes on how to make a chair, table and sofa using the origami technique

As an example of how to make paper furniture with your own hands (step by step), below are three diagrams for origami. The size of the finished product folded along each of them depends on the size of the sheet. After practicing several times, it will not be difficult to calculate it relative to the doll’s height.

The first diagram shows the paper technique.

It would be nice to add a chair to the made paper table. How to do this is shown in this diagram.

Instead of a paper chair, in addition to the table, it’s a good idea to use a sofa assembled according to the diagram shown below.

for paper dolls without glue

Besides origami, there is another way to make paper furniture without glue. However, in this case you cannot do without scissors. You will need them to cut out doll furniture according to the pattern. Then you need to fold it.

A chair or slab made in this way looks more elegant than origami products. But when creating furniture this way, you need to cut and fold it very carefully so as not to spoil it.

To print such diagrams, it is best to use paper with a density of about 100 g/m2.

The finished product can be painted to your liking.

Making doll furniture from color schemes

In the old days, paper cutting houses could be purchased at almost any bookstore. Follow the instructions and use scissors and glue to create a charming dollhouse or palace with furniture.

Knowing the basics of working with any graphic editors and the principles of constructing such diagrams, you can easily make similar blanks. If making a whole palace for a doll is not part of your plans, it wouldn’t be a bad idea to create a wardrobe, chair or bed and, after printing them, make vintage furniture for your favorite. Needless to say, for this method Only laser printing is suitable, since inkjet printing, although more colorful, can float or simply fade over time when it comes into contact with water.

As for the choice of glue for this furniture, it is best to use Double-sided tape or It is also acceptable to use glue gun, but very carefully.

Weaving paper tubes as one of the ways to make doll furniture

Weaving is a fairly ancient and popular type of needlework. Today it is experiencing a new revival. However modern masters increasingly, paper tubes or ribbons are used for weaving rather than wicker. The finished product is painted and then varnished and in this form can serve for many years.

When choosing a way to make paper furniture for Barbie with your own hands, it would be nice to take advantage of this: today the tendency to use wicker paper furniture in your homes is becoming more and more fashionable.

Among the advantages of this technique are the elegance and strength of the finished furniture, as well as its realism. In addition, the materials will cost nothing, because these are unnecessary old newspaper or magazine sheets.

But among the disadvantages - to make doll furniture using this method, you must first master the weaving technique, and also have a certain pattern.

But, having learned how to create toy tables, cabinets or chairs for Barbie, it would be nice to try your hand at making human-sized furniture.

Matchbox furniture

Among the most used materials for making doll furniture are matchboxes. In fact, they act as bricks for creating tables, chests of drawers, beds, etc. Moreover, if some craftsmen simply paste over the finished product with colored paper or fabric, others decorate matchbox furniture using decoupage, giving the product realism.

To make sure that a matchbox can be made very beautiful furniture for a doll, below is a master class on making a toy chest of drawers from two boxes of matches. To complete it you will also need stationery cardboard, black and White paint, double sided tape, sandpaper and two beads.

In this way you can also successfully make wardrobes, desks And kitchen furniture. The main thing is to have a lot of matchboxes in stock.

Furniture for dolls made of cardboard

Quite popular today is a technique that tells how to make furniture for dolls with your own hands from cardboard and paper. This method is used to make not only furniture, but also entire dollhouses.

For this method, it is most rational to use corrugated cardboard, the source of which can be any box from a parcel or some kind of household appliance.

Most often, furniture made from this material is covered with paper or fabric, and sometimes painted. However, in last years Eco-style has become especially popular. Following it, furniture made of corrugated cardboard is not painted, but is left as is. At the same time, do not forget: if there was something printed or written on the front side of the box, it needs to be re-faced so that the picture remains hidden inside the product.

It is worth noting that the production of real modular furniture Corrugated cardboard is becoming quite a popular trend in the modern world.

True, it is not very durable, but it is affordable and environmentally friendly, unlike plastic, and can be easily disposed of or transported when moving.

Painted furniture

When choosing how to make paper furniture, do not underestimate the simplest ways. One of them is to simply draw furniture on paper or cardboard and place it in the dollhouse.

Of course, the painted home decoration cannot be compared with voluminous furniture made using one of the above methods, but as an option it is quite suitable for novice dollhouse designers.

By the way, in addition to paper, you can also draw on corrugated cardboard. It is noteworthy that some modern designers are beginning to use the method of partially hand-drawn furniture to decorate real houses.

Furniture made from combined materials: master class on creating openwork chairs from paper and a coffee cup

When imagining how to make furniture out of paper, you should not neglect combining it with various improvised means, for example, with paper chip boxes or coffee cups.

For example, a small cylinder-shaped box will make an excellent cradle for a baby doll.

And a paper coffee cup combined with paper quilling strips will make a very elegant doll chair.

The seat and legs of the future chair are cut out from the bottom of the cup. Two cotton swabs are glued between the legs to add stability. The remaining paper from the cup is suitable as material for the back of the chair. Suitable for decorating a seat with weaving, as well as for making elegant curls on the legs and back of the product.

Papier mache

Among the many ways to make furniture out of paper, the papier-mâché method (using paper mass and glue for modeling) stands out.

Most often, this method is used to make masks or some kind of figures, but it is also quite suitable for doll furniture. Like weaving from paper tubes, the papier-mâché technique is very economical, but at the same time it is simpler.

Furniture made in this way must have a frame and dry well before it is coated with paint or varnish. By the way, if you add a little gypsum to the paper mixture, the product will become much stronger.

Each of the above methods for making paper furniture is unique in its own way. Some are complex, others are simpler to implement. But no matter which one is chosen, the main thing is to put your soul into your work. Then the result will definitely please you, and your favorite children's doll will have the best home in the world.

If you are tired of creating ordinary flat crafts on animal and plant themes using the origami technique, then we suggest you create a three-dimensional table for dolls small size. It can be of any size, because it depends on the parameters of the paper sheet that will be used in the work. The color can also be chosen to suit your taste or the interior of the doll's kitchen.

So we get a beautiful one dinner table your dreams from such a simple and affordable material. This can be done for a short time several pieces of furniture and add them to a small dollhouse and veranda.

Necessary materials:

• square sheet of paper;
• scissors.

Stages of making a three-dimensional table using the origami technique:

We prepare a square sheet of paper of any size. Also, any color of paper can be selected. If you want to make an original shade, then use designer paper or multi-colored sheets for scrapbooking.

Fold a square sheet of paper in half. To do this, take the right side of the sheet and move it to the corners of the left. We go through the fold so that it turns out smooth and beautiful.

We open the folded blank to create a paper table. The sides should be folded to the resulting vertical fold. This should be done carefully and slowly so that the lines of the future table are identical and even.

We return to the original position. You should go along the center fold line with scissors in order to then get two identical parts for folding the craft using the origami technique.

At the same time we bend the upper and lower corners to the central fold lines.

Fold two parts of the blank in half along a vertical line to create a table using the origami technique. We get two table blanks with legs.

Place the right piece in the middle of the left one.

Next, you should bend the upper and lower parts of the workpiece, which have table legs.

Raise the folded top and bottom sides a little. We turn it over and get a finished three-dimensional table using the origami technique from plain paper.

Today we invite you to add a simple but cute table to your collection of paper furniture and home items. The assembly diagram for such a craft can be easily mastered by a beginner in origami, and even by a child. In addition, today we have selected for you both a diagram (for those who fold origami only this way) and a video master class (for those who better see it once).

To work you will need one square sheet of paper. With color - decide for yourself, because it depends on whether your origami table will be in harmony with other paper objects. Assembly will only take about 5-10 minutes. And if you are ready, we can start right now.

To begin with, we present a printed assembly diagram, which consists of two stages. The first is the basic form of a catamaran, and then we will show how it can be transformed into an origami table. After you complete all the folds, you just need to bend the legs so that the paper table takes on its finished form.

And now the promised video master class, in which all stages of assembly will be shown simply, in detail, and therefore as accessible as possible. Happy building!

KARTOGRAPF Treasure hunting, old maps are exactly what you need if you crave adventure and the thrill of new sensations. Here you will find something to keep yourself busy, and in what direction to direct the energy that is raging and rushing out, because searching for treasures is a very interesting adventure that you are probably fond of last time in childhood. And now you can experience it live!

There is probably no girl in the world who would not dream of having a toy house for dolls with furniture. A real set, of course, won’t fit in it, but it’s easy to make paper figures yourself. Our detailed master class, after studying which you can easily assemble origami furniture.

To work, we will need a square sheet of paper (white or colored). When choosing a size, be guided by the required dimensions of the future chair.

Scheme:

To learn how to make an origami chair, we suggest using a video tutorial. Follow step by step instructions MK and the entire manufacturing process will take you no more than 10 minutes.

Video: Master classes on creating an origami chair

Forming an origami table

An origami table is a simple paper craft, a necessary thing in any home, even though it is a toy. It will make a wonderful set with chairs. The work will not take you much time, and the result will certainly please you.

Assembly diagram for beginner craftsmen:

Video: Lesson on creating an origami table

Origami cabinet

We suggest you make a cabinet with drawers - a craft for storing small accessories. Children put dolls' clothes in it.

To work, you will need 2 square sheets of paper (20*20 cm), which must be folded sequentially, as in the video instructions.

Video: Master class on assembling an origami cabinet

Origami bed

The bed is the main subject home interior, we will try to make this thing out of paper. The assembly process is simple, so both children and adults can master folding skills. To work you will need a square piece of paper medium density(20*20 cm). If desired, take other sizes.

Template diagram:
Step by step description:

1. Fold the sheet in half, different sides(crosswise) and mark the center.
2. We bend the side edges towards the center, 1/3.
3. Then fold it again to form a rectangle.
4. We lower the side parts to the fold line and open the pockets, turning the corners along the contours.
5. We bend the corners away from ourselves - we make legs.
6. We get a wonderful bed.

Video: MK for creating an origami bed

If difficulties arise during the folding process or some points are unclear to you, then look at the hint from an experienced craftsman.

Origami sofa

It's hard to imagine a living room without a sofa. For a guest, this is a great place to sit down, and for the owner, it’s a great place to lie down and relax after work. Let's make a sofa out of paper using the origami technique, as in the photo:
Scheme:

Step-by-step instruction:

1. Fold the sheet in half (twice) and unfold it. Get a cross-shaped fold.
2. Fold 1/6 of the page along the dotted line (see photo).
3. We wrap the sheet along the fold opposite this strip.
4. We wrap the side parts of the resulting rectangle, 1/3 on each side.
5. Bend the corners forward (in the places indicated by the white arrow). We do not touch the back side of the sheet.
6. Fold the opened white rectangles in half.
7. Raise the part of the craft marked with a dotted line.
8. Bend half of the raised part down.
9. Bend the sides forward.
10. Pull the front part (back) forward.
11. We get a paper sofa.

Video: Lesson on how to form an origami sofa

Schemes for folding furniture using origami technique

During their life, almost every person has experienced a move or carried out repairs on their own, after which a lot of thick cardboard was left behind. A large amount of paper material should not be thrown away immediately; you can find it practical use. In this article we will look at how to make a paper table with your own hands.

Cardboard furniture - is the idea worth the time?

An alternative to ordinary furniture is a self-made cardboard table. Which we very often throw away without thinking about what this material can be used to create an extraordinary product. In order for the piece of furniture to be durable and not bend under the weight of the thing placed on it, for this it is necessary to properly process the cardboard. We’ll tell you exactly how below in the text.

Paper furniture has a lot of positive advantages:

• Stylish design. You can design any table for your apartment based on your preference and taste.
• Economical. When manufacturing such a piece of furniture, the costs are minimal, because they only go towards purchasing the necessary tools.
• Mobility. When you move, you won't have to go through the whole nightmare of packing your things. Easily foldable furniture does not cause any hassle.
• Ergonomics. There is no need to walk around the expanses of stores in search of suitable item furniture that would fit perfectly into the interior and be very comfortable.
• Safety. Cardboard furniture does not contain any harmful elements. And since you make it yourself, you can easily check all the components.
• Environmental friendliness. If a piece of furniture has lost its attractiveness and former appearance, or for some reason you want to change the design, you can simply disassemble and throw away, since the cardboard material is not capable of harming the environment.
• Strength. Proper processing of cardboard allows you to extend the life of the manufactured piece of furniture.

Important! Despite many advantages, cardboard structures have one unpleasant drawback. Prolonged exposure to a damp environment causes significant damage, and the furniture becomes unusable in the future. Therefore, you should always remove the paper structure from the street.

Making a table using origami technique

A paper toy table, which is made using the origami technique, cannot withstand heavy weight, since it is made of plain paper. If you use a printer to print paper that imitates wood, then the appearance of the paper cannot be distinguished from the real thing, and it looks quite believable. This table looks great when paired with chairs, which you can also make yourself using the origami technique.

How to make a table out of paper using the origami technique with your own hands:

• Prepare a sheet of paper that should be folded in half.

Important! To make a table you need to use only a square leaf. If you have paper standard format A4, then you need to bend it in half diagonally. The result will be a double triangle and a single rectangle. This is what needs to be cut off to get a square-shaped leaf.

• Next you need to open the folded sheet.
• The sides of your part must be bent to a vertical line.
• After this, bend it in half downwards and open the workpiece.
• Bend the upper and lower parts of the workpiece to a horizontal line.
• Now unfold our workpiece.
• Diagonally, you need to fold the right side and bend it to the side.
• The same procedure should be done on the left side.
• Fold the bottom part of the workpiece up.
• On the upper section of the paper, repeat exactly the same steps as with the lower part.
• Now we need to expand our figure.
• The right corner, which is at the top, must be bent down diagonally.
• Next, open the middle of our figure.
• Now the side parts need to be rotated so that a square is formed.
• With the remaining corners you need to perform exactly the same actions.
• Next, we work with one square, the sides of which must be folded to the diagonal line (folding the sides is reminiscent of the method of folding an airplane).
• Now you need to open the workpiece.
• From the resulting blank, bend a figure that would look like a rhombus. In the end, we should end up with four diamond shapes, which will be placed under the large square on the corner side.
• Now you need to bend the resulting diamonds in half upwards.

The paper table is ready! It can be used to play with dolls. The child will be delighted with such a new acquisition for his toys.

How to make a doll table out of paper?

Let's consider another option on how to make a paper doll table that will bring joy to your child:

1. Bend the square-shaped workpiece three times, then turn it in the opposite direction twice, and then turn it over. Thus, we get the very first workpiece with the intended fold lines.
2. Then bend the middle of each side of the square towards the center. As a result, the corners of the square rise up, thus forming the legs of the table.
3. It is recommended to carefully iron all folds with your hands so that the legs of the table are clearly marked.

All that remains is to turn our manufactured product over and decorate the doll’s interior with it.

Paper laptop table stand

Nowadays, almost every user has an indispensable tool for work and communication, which is a laptop. In addition to the computer itself, all sorts of peripheral devices are attached to it. The presence of removable hard drives, mice, flash drives and others necessary elements makes you want to buy a table for convenience. Who doesn't want to run to the store, but wants to have convenient stand for a laptop, there is an excellent solution - make a table out of paper with your own hands.

Materials and tools:

1. a laptop, the presence of which will allow you to correctly measure the future stand;
2. yardstick;
3. sheets of paper or newspaper that will be used for the stencil;
4. thick cardboard from which the stand itself will be made (an unnecessary box may do);
5. long ruler;
6. pencil or marker;
7. utility knife or large scissors.

How to make a laptop table out of paper:

• Newspaper or paper should be spread on a horizontal surface. Next, carefully measure the dimensions of the table and make a stencil.

Important! If the measurements are made incorrectly, then best case scenario the table will turn out to be crooked, and in the worst case, the stand will not support the laptop.

• First of all, we will make a leg, which is a crossbar between the legs of the stand to give the table greater rigidity. Using a tape measure, you need to measure the length of the computer device along the keyboard from one corner to the other. Mark half of this length on paper using a marker. Next, you need to draw a line that will be half the base of the leg. This detail should not be completely drawn out, since if the slightest inaccuracy is made, the laptop will stand crookedly.
• From the edges of the segment you need to measure 4 cm and 7 cm upward, after which you should draw a rectangle. Mentally divide our figure into 3 parts. The first third is almost a straight line at a height of 4 cm, for the second third of the part you need to make a bend to the 7 cm line at an angle of 45 degrees, using a pattern, or simply draw it by hand. At the point of contact of two broken lines you need to make a narrow sleeve, which will be a cutout for aligning the parts
• Let's move on to designing the template for the legs of the stand. You can choose any angle of the table, depending on your personal preferences. The height of the left and right side legs.

Important! When you draw the template, you need to pay attention to the protruding tooth. It will subsequently serve to prevent the laptop from falling. In height, it should be about a third of the thickness of the laptop.

• The slot in the leg that will engage with the leg should not be in the middle, but located at a distance of about ⅓ from the far edge. This affects the stability of the product.
• We draw the bends in free form at your discretion. The slots that will be in the legs and prongs should be no more than 3.5-4 cm in height. Depending on the thickness of the cardboard, they should be about 4-5 cm in width. Both parts should be the same.
• Let's move on to cutting out paper templates. An unnecessary box with relatively thick cardboard may be suitable as a starting material.
• With the bottom cut, you need to attach the template of the first part to the perfectly flat edge of the cardboard, otherwise the stand will wobble.
• You need to carefully trace the template on one side, then flip the template over to the other side and trace it in the same way. As a result, one symmetrical part was formed, which is the leg.
• Now we draw out the legs. On another cardboard you need to lay out the second template and draw the legs, which should be completely identical.
• Cut out all parts with scissors or a stationery knife.

If you cut everything out correctly and carefully aligned all the parts, then the table in the shape of a laptop stand is ready. All that remains is to install your digital friend on the table.

Table made of plain cardboard

A self-made table brings an original touch to your apartment. At correct processing cardboard, your table can withstand certain loads. Let's consider another option for making an interior item.

Required tools and materials:

1. packaging cardboard;
2. regular and colored tape;
3. paper tape;
4. double sided tape;
5. stationery knife;
6. sharp scissors;
7. dull knife;
8. iron ruler or tape measure;
9. a simple pencil;
10. eraser;
11. wallpaper glue or PVA;
12. sandpaper;
13. kraft paper and tracing paper.

How to make a paper table with your own hands:

• First you need to design a tabletop. For strength, it is best to make it two-level. With help stationery knife Three blanks need to be cut out of cardboard, the shape of which would resemble the designed tabletop. The first part is the top level, and the second and third will be the bottom level.
• Then cut strips from cardboard that need to be bent like an accordion and secured with glue to the lower parts of the tabletop. The strips must be the same width, otherwise dents will appear.
• Next, we secure the second part of the lower tabletop.
• Now let's make top level, onto which we also glue cardboard strips.
• When the glue is completely dry, you need to connect both parts of the tabletop.
• To increase the strength of the tabletop, use tape to secure the cardboard strips and corners.
• Now let's move on to constructing the base. For the corner table you only need to make two legs. To increase the functionality of the table, you can additionally design several shelves.
• To build the legs you need to prepare 4 identical sheets of cardboard. They can be either rectangular or square shape, since it all depends on the size of the leg. You can attach them with glue. At the junction, grooves must be made, which are secured with glue.

Important! If the table leg is deaf, then in this case, single-layer cardboard is sufficient for the stiffening ribs, only they must be very close to each other. In order to have a more reliable result, it is best to glue the stiffeners and shelves 3-4 pieces at a time.

• To strengthen the edges of cardboard furniture, you need to use kraft paper, which has dark color. Using wallpaper glue, you need to glue all the seams with it.
• Next we do the finishing. First, all the elements need to be covered with old newspapers, then the surface needs to be leveled with tracing paper, wrapping paper or craft paper.
• White paper (or tracing paper) is glued to the entire piece of furniture, since this way it is much easier to decorate the furniture.

Important! Before gluing kraft paper and tracing paper, they should not be cut, but should be torn by hand.

• And only now after a layer of paper can you apply acrylic paint. This way the base for decoration is ready. Now the work of your imagination begins, the main thing is that after finishing works The designed table fits harmoniously into your interior.

Important! The tabletop can also be made from newspaper tubes. This option will create a special flavor in your room. In this case, you will have to acquire additional weaving skills.

How to make a cardboard table more durable?

• If you made a table out of paper with your own hands, then to give the cardboard strength and protect it from moisture, you can use parquet varnish, which must be applied to already finished parts.
• When making furniture, make sure it is symmetrical. If you create an asymmetrical piece of furniture, you need to add additional supports to it to strengthen the structure.
• Availability large quantity cross supports make the piece of furniture more stable.
• When making a piece of furniture, different cardboard is chosen, which can be single-layer, two-layer or three-layer. The thicker the material, the stronger it is.

In principle, you can even create from cardboard practical furniture for household use. And what can we say about arranging a dollhouse - there are no limits to imagination. Use this simple and available material to create various crafts - beautiful, original, applicable not only for decoration, but also in everyday life.

If you are tired of creating ordinary flat crafts on animal and plant themes using the origami technique, then we suggest you create a three-dimensional table for small dolls. It can be of any size, because it depends on the parameters of the paper sheet that will be used in the work. The color can also be chosen to suit your taste or the interior of the doll's kitchen.

So we get the beautiful dining table of your dreams from such a simple and affordable material. This way you can make several pieces of furniture in a short time and add them to a small dollhouse and veranda.

Necessary materials:

• square sheet of paper;
• scissors.

Stages of making a three-dimensional table using the origami technique:

We prepare a square sheet of paper of any size. Also, any color of paper can be selected. If you want to make an original shade, then use designer paper or multi-colored sheets for scrapbooking.

Fold a square sheet of paper in half. To do this, take the right side of the sheet and move it to the corners of the left. We go through the fold so that it turns out smooth and beautiful.

We open the folded blank to create a paper table. The sides should be folded to the resulting vertical fold. This should be done carefully and slowly so that the lines of the future table are identical and even.

We return to the original position. You should go along the center fold line with scissors in order to then get two identical parts for folding the craft using the origami technique.

At the same time we bend the upper and lower corners to the central fold lines.

Fold two parts of the blank in half along a vertical line to create a table using the origami technique. We get two table blanks with legs.

Place the right piece in the middle of the left one.

Next, you should bend the upper and lower parts of the workpiece, which have table legs.

Raise the folded top and bottom sides a little. We turn it over and get a finished three-dimensional table using the origami technique from plain paper.

Paper furniture is in demand in interior decoration; you can make simple shapes with your own hands. Another area of ​​application for these items is toys for children. Every child will want to have a dollhouse where there will be a beautiful paper furniture, made by hand. To make such products, you do not need additional origami skills; you just need to follow the instructions provided.

Origami furniture is an interesting trend that requires special attention. Making such figures does not take much time, and the resulting result pleases adults and children with its appearance. main feature products - maximum similarity with real pieces of furniture: sofas, tables, cabinets, armchairs and chests of drawers.

Use such furniture in real life It’s unlikely to work, but the items will become good option to create a model of a future room or design a dollhouse. To achieve similarity with real furniture, textured paper that imitates various surfaces: stone, leather, fabric, wood and metal. When creating objects, it is better to use paint that does not completely saturate the material, but only gives it color.

The following materials are used for production:

• Material for the base – matchboxes, some corrugated cardboard, colored thick paper;
• Pieces of fabric decorative film and textured paper for finishing finished items;
• Scissors;
• Black pencil or pen;
• PVA glue or any other for working with paper.

You can work with paper yourself, or you can involve loved ones in the process. Then the resulting products will be diverse, but together they will form a single ensemble.

How to do the following options

You can make anything from paper. You just need to show imagination and perseverance. Consider master classes on making popular types furniture. Based on detailed instructions, you can make other types of interior items. The most popular are:

• Sofa;
• Dresser;
• Armchair;
• Closet;
• Table.

To find out how to properly construct paper furniture, you need to consider each option separately.

Sofa

A paper sofa will look great both in a dollhouse and in a miniature copy real interior. Before you start, pay attention to the paper sizes:

• For miniature options You should choose colored paper 10x10 cm;
• For execution in medium sizes, you need to give preference to a workpiece of 20x20 cm;
• To create a large-sized sofa, the dimensions of the material increase proportionally.

The color of the paper can be chosen as desired, but it is better that it fits into the future interior or imitates real furniture. Having selected the materials, you can begin manufacturing:

1. The square sheet is folded in half, after which it is opened and folded perpendicular to the first one;
2. The next step will be an additional hem. The bottom edge is folded to the middle fold line, then folded again. The output is 3 fold lines, not counting the central one;
3. The lower thin strip is folded onto the first fold, after which two identical triangles are laid by folding the side parts diagonally;
4. The accordion is folded to the end, and top part the workpieces are bent to the middle. The workpiece is turned over;
5. The lower corners are folded up in turn, and the upper corners are bent down diagonally;
6. The workpiece is turned over again, bending one corner inward. This is how the back is formed.

After turning the product over, you need to form the legs of the sofa and it will be ready. Such a beautiful and original item will become a real decoration for a toy living room or an original art object.

Fold the sheet in half

Half again

Make three folds at the bottom

Making corners from below

Raise the bottom part up

Making folds on the sides

Leveling the back

Making legs

Ready product

Dresser

The most optimal and profitable way to create a paper chest of drawers is to use matchboxes. They slide out conveniently, so making the item will not be difficult. If you want to make a chest of drawers out of paper, then you should use paper blanks. This chest of drawers is convenient for storing small, lightweight items. This will perfectly include beads, beads, clasps, clips and other little things for creativity and handicrafts. The top of the chest of drawers can be painted with colored markers, giving it an original look.

Construction of a paper chest of drawers consists of the following steps:

• Drawing a diagram for creating boxes: this stage is skipped if ready-made matchboxes or other blanks are used;
• Cutting out diagrams along the lines, as well as assembling boxes for future chest of drawers;
• The entire chest of drawers is covered with cardboard for strength, but there is no need to seal the front part where the drawers will be inserted;
• The fronts of the drawers are covered with any material - fabric, film, leather, and a bead or button is also attached as a handle;
• Legs for a chest of drawers can be made from push pins - for miniature furniture or pipes from toilet paper– for dimensional products.

This chest of drawers is also a good gift for a girl with a lot of jewelry: the drawers will fit all the jewelry.

Making boxes

Creating Box Elements

Connecting the elements

We decorate the coverings with rags

We glue the fronts of the drawers

Creating handles

Finished chest of drawers

Armchair

Making a stylish chair from colored paper is also not difficult. To create it you don’t even need glue or tape, you only need a sheet of paper of the required color. It is worth noting that cutting blanks from beautiful textured paper will give best result than furniture made from ordinary plain material. In addition, if you find diagrams that show parts of furniture made in different styles– you can make a chair that is as similar as possible to real furniture. To work you will need one sheet of paper in the shape of a square. Its dimensions are selected depending on the dimensions of the future product:

1. Bend the square sheet in half, then open it and press one of the halves to the center fold line;
2. Also press the second part of the square to the center of the workpiece. Next, walk your hand along all the fold lines to clearly outline the resulting lines. Open the workpiece and turn it over with the front side facing you;
3. One part of the 4 resulting lines must be cut: this is done using scissors or a metal ruler;
4. Fold the workpiece across the resulting lines, visually marking the center, and bend the triangle to the right. Do the same with the left side, you should end up with two triangles superimposed on each other;
5. The middle strip remaining at the bottom is folded over the triangles. Each fold line is additionally smoothed with your fingers;
6. The strip that was previously bent up is bent back - it will serve as a seat. The side parts will become supports for the hands; they must be glued from the inside to the seat.

The result is an original and easy-to-make paper chair. To diversify its surface, decorative paper that imitates leather can be glued to the seat.

Closet

The construction of the cabinet is similar to the construction of the chest of drawers, which was described earlier. The difference will be that the frame should be higher, and in addition drawers need shelves. Some nuances of making a paper cabinet:

• For the workpiece, you must use a scanner made from a rectangular sheet of thick paper;
• The ideal size would be A4 format; if you need a larger product, the dimensions are increased proportionally;
• After you have drawn the diagram, you need to cut it out: first, cut out the main elements along the lines, and then start cutting out the overhead valves;
• The frame of the model is glued together without doors;
• The doors are cut out of the same paper. Later they can be decorated with film: the adhesive layer of such material will allow you to apply it to the base without any problems.

Finally, decorative handles are glued to the doors. Buttons or beads are suitable for this. The legs are made of thick cardboard.

Table

Assembling a table from paper is not difficult, especially if you already have experience working with this material. There are many options for creating tables, but beginners should choose less the hard way. It consists of the following actions:

• For work, use a square sheet of paper;
• All sides of the square are folded inward, forming mini-squares;
• Each square is folded inward to form triangles;
• The triangles curve outward;
• The final stage is the formation of the legs.

To elevate the tabletop, stick beautiful decorative paper on it or paint it with colored felt-tip pens and acrylic.

Decoration

Decoration should be a separate stage finished products. Do-it-yourself furniture, diagrams of which can be found in this material, is decorated as follows.

Material	Peculiarities	What is it suitable for?
Self-adhesive paper for furniture	This material can be used in the manufacture of any type of furniture. This film is ideal for beginner craftsmen, because it is easy to cut, and adhesive layer allows you to decorate the surface without any problems.	For tabletops, seats of chairs, sofas and armchairs, for decorating cabinet doors and chest of drawers.
Using paints	Paints allow you to show creativity and move away from standards. Using paint you can paint any pattern and design. When choosing a product, pay attention to ensure that it does not damage paper base. Acrylic or water-based compositions are preferred.	For all kinds of crafts, especially for decoration facial parts products.
Application of fabric	The fabric allows you to imitate the structure of furniture as much as possible.	Suitable for sofas, armchairs and chairs.

If gouache is used for decoration, you need to mix it with PVA glue (1:1). After drying, the paint will not imprint on your hands, and the product will receive additional rigidity.

Do-it-yourself paper furniture will be... excellent option for a dollhouse or designing models of a future interior. Creating miniature objects is a fun activity that you can involve all family members in.

Drawings and diagrams

During their life, almost every person has experienced a move or carried out repairs on their own, after which a lot of thick cardboard was left behind. A large amount of paper material should not be thrown away immediately; practical applications can be found for it. In this article we will look at how to make a paper table with your own hands.

Cardboard furniture - is the idea worth your time?

An alternative to ordinary furniture is a self-made cardboard table. Which we very often throw away, without thinking that this material can be used to create an extraordinary product. In order for the piece of furniture to be durable and not bend under the weight of the thing placed on it, for this it is necessary to properly process the cardboard. We’ll tell you exactly how below in the text.

Paper furniture has a lot of positive advantages:

• Stylish design. You can design any table for your apartment based on your preference and taste.
• Economical. When manufacturing such a piece of furniture, the costs are minimal, because they only go towards purchasing the necessary tools.
• Mobility. When you move, you won't have to go through the whole nightmare of packing your things. Easily foldable furniture does not cause any hassle.
• Ergonomics. There is no need to walk around the expanses of stores in search of a suitable piece of furniture that would fit perfectly into the interior and would be very comfortable.
• Safety. Cardboard furniture does not contain any harmful elements. And since you make it yourself, you can easily check all the components.
• Environmental friendliness. If a piece of furniture has lost its attractiveness and former appearance, or for some reason you want to change the design, you can simply disassemble it and throw it away, since cardboard material is not capable of harming the environment.
• Strength. Proper processing of cardboard allows you to extend the life of the manufactured piece of furniture.

Important! Despite many advantages, cardboard structures have one unpleasant drawback. Prolonged exposure to a damp environment causes significant damage, and the furniture becomes unusable in the future. Therefore, you should always remove the paper structure from the street.

Making a table using origami technique

A paper toy table, which is made using the origami technique, cannot withstand heavy weight, since it is made of plain paper. If you use a printer to print paper that imitates wood, then the appearance of the paper cannot be distinguished from the real thing, and it looks quite believable. This table looks great when paired with chairs, which you can also make yourself using the origami technique.

How to make a table out of paper using the origami technique with your own hands:

• Prepare a sheet of paper that should be folded in half.

Important! To make a table you need to use only a square leaf. If you have standard A4 paper, you need to fold it in half diagonally. The result will be a double triangle and a single rectangle. This is what needs to be cut off to get a square-shaped leaf.

• Next you need to open the folded sheet.
• The sides of your part must be bent to a vertical line.
• After that, bend it in half downwards and open the workpiece.
• Bend the upper and lower parts of the workpiece to a horizontal line.
• Now unfold our workpiece.
• Diagonally, you need to fold the right side and bend it to the side.
• The same procedure should be done on the left side.
• Fold the bottom part of the workpiece up.
• On the upper section of the paper, repeat exactly the same steps as with the lower part.
• Now we need to expand our figure.
• The right corner, which is at the top, must be bent down diagonally.
• Next is to open the middle of our figure.
• Now the side parts need to be rotated so that a square is formed.
• With the remaining corners you need to perform exactly the same actions.
• Next, we work with one square, the sides of which must be folded to the diagonal line (folding the sides is reminiscent of the method of folding an airplane).
• Now you need to open the workpiece.
• From the resulting blank, bend a figure that would look like a rhombus. In the end, we should end up with four diamond shapes, which will be placed under the large square on the corner side.
• Now you need to bend the resulting diamonds in half upwards.

The paper table is ready! It can be used to play with dolls. The child will be delighted with such a new acquisition for his toys.

How to make a doll table out of paper?

Let's consider another option on how to make a paper doll table that will bring joy to your child:

1. Bend the square-shaped workpiece three times, then turn it in the opposite direction twice, and then turn it over. Thus, we get the very first workpiece with the intended fold lines.
2. Then bend the middle of each side of the square towards the center. As a result, the corners of the square rise up, thus forming the legs of the table.
3. It is recommended to carefully iron all folds with your hands so that the legs of the table are clearly marked.

All that remains is to turn our manufactured product over and decorate the doll’s interior with it.

Paper laptop table stand

Nowadays, almost every user has an indispensable tool for work and communication, which is a laptop. In addition to the computer itself, all sorts of peripheral devices are attached to it. The presence of removable hard drives, a mouse, a flash drive and other necessary elements makes you want to purchase a table for convenience. Those who don’t want to run to the store, but want to have a convenient laptop stand, have a great solution - make a table out of paper with your own hands.

Materials and tools:

1. a laptop, the presence of which will allow you to correctly measure the future stand;
2. yardstick;
3. sheets of paper or newspaper that will be used for the stencil;
4. thick cardboard from which the stand itself will be made (an unnecessary box may do);
5. long ruler;
6. pencil or marker;
7. utility knife or large scissors.

How to make a laptop table out of paper:

• Newspaper or paper should be spread on a horizontal surface. Next, carefully measure the dimensions of the table and make a stencil.

Important! If the measurements are taken incorrectly, then at best the table will turn out to be crooked, and at worst the stand will not support the laptop.

• First of all, we will make a leg, which is a crossbar between the legs of the stand to give the table greater rigidity. Using a tape measure, you need to measure the length of the computer device along the keyboard from one corner to the other. Mark half of this length on paper using a marker. Next, you need to draw a line that will be half the base of the leg. This detail should not be completely drawn out, since if the slightest inaccuracy is made, the laptop will stand crookedly.
• From the edges of the segment you need to measure 4 cm and 7 cm upward, after which you should draw a rectangle. Mentally divide our figure into 3 parts. The first third is almost a straight line at a height of 4 cm, for the second third of the part you need to make a bend to the 7 cm line at an angle of 45 degrees, using a pattern, or simply draw it by hand. At the point of contact of two broken lines you need to make a narrow sleeve, which will be a cutout for aligning the parts
• Let's move on to designing the template for the legs of the stand. You can choose any angle of the table, depending on your personal preferences. The height of the left and right sides of the leg will depend on this.

Important! When you draw the template, you need to pay attention to the protruding tooth. It will subsequently serve to prevent the laptop from falling. In height, it should be about a third of the thickness of the laptop.

• The slot in the leg that will engage with the leg should not be in the middle, but located at a distance of about ⅓ from the far edge. This affects the stability of the product.
• We draw the bends in any shape at your discretion. The slots that will be in the legs and prongs should be no more than 3.5-4 cm in height. Depending on the thickness of the cardboard, they should be about 4-5 cm in width. Both parts should be the same.
• Let's move on to cutting out paper templates. An unnecessary box with relatively thick cardboard may be suitable as a starting material.
• With the bottom cut, you need to attach the template of the first part to the perfectly flat edge of the cardboard, otherwise the stand will wobble.
• You need to carefully trace the template on one side, then flip the template over to the other side and trace it in the same way. As a result, one symmetrical part was formed, which is the leg.
• Now we draw out the legs. On another cardboard you need to lay out the second template and draw the legs, which should be completely identical.
• Cut out all parts with scissors or a stationery knife.

If you cut everything out correctly and carefully aligned all the parts, then the table in the shape of a laptop stand is ready. All that remains is to install your digital friend on the table.

Table made of plain cardboard

A self-made table brings an original touch to your apartment. If cardboard is treated correctly, your table can withstand certain loads. Let's consider another option for making an interior item.

Required tools and materials:

1. packaging cardboard;
2. regular and colored tape;
3. paper tape;
4. double sided tape;
5. stationery knife;
6. sharp scissors;
7. dull knife;
8. iron ruler or tape measure;
9. a simple pencil;
10. eraser;
11. wallpaper glue or PVA;
12. sandpaper;
13. kraft paper and tracing paper.

How to make a paper table with your own hands:

• First you need to design a tabletop. For strength, it is best to make it two-level. Using a stationery knife, you need to cut out three blanks from cardboard, the shape of which would resemble the designed tabletop. The first part is the top level, and the second and third will be the bottom level.
• Then cut strips from cardboard that need to be bent like an accordion and secured with glue to the lower parts of the tabletop. The strips must be the same width, otherwise dents will appear.
• Next, we secure the second part of the lower tabletop.
• Now we make the top level, onto which we also glue cardboard strips.
• When the glue is completely dry, you need to connect both parts of the tabletop.
• To increase the strength of the tabletop, use tape to secure the cardboard strips and corners.
• Now let's move on to constructing the base. For the corner table you only need to make two legs. To increase the functionality of the table, you can additionally design several shelves.
• To build the legs you need to prepare 4 identical sheets of cardboard. They can have either a rectangular or square shape, since it all depends on the size of the leg. You can attach them with glue. At the junction, grooves must be made, which are secured with glue.

Important! If the table leg is deaf, then in this case, single-layer cardboard is sufficient for the stiffening ribs, only they must be very close to each other. In order to have a more reliable result, it is best to glue the stiffeners and shelves 3-4 pieces at a time.

• To strengthen the edges of cardboard furniture, you need to use kraft paper, which has a dark color. Using wallpaper glue, you need to glue all the seams with it.
• Next we do the finishing. First, all the elements need to be covered with old newspapers, then the surface needs to be leveled with tracing paper, wrapping paper or craft paper.
• White paper (or tracing paper) is glued to the entire piece of furniture, since this way it is much easier to decorate the furniture.

Important! Before gluing kraft paper and tracing paper, they should not be cut, but should be torn by hand.

• And only now, after a layer of paper, can you apply acrylic paint. This way the base for decoration is ready. Now the work of your imagination begins, the main thing is that after finishing work the designed table fits harmoniously into your interior.

Important! The tabletop can also be made from newspaper tubes. This option will create a special flavor in your room. In this case, you will have to acquire additional weaving skills.

How to make a cardboard table more durable?

• If you made a table out of paper with your own hands, then to give strength to the cardboard and protect it from moisture, you can use parquet varnish, which must be applied to the finished parts.
• When making furniture, make sure it is symmetrical. If you create an asymmetrical piece of furniture, you need to add additional supports to it to strengthen the structure.
• The presence of a large number of transverse supports allows you to make a piece of furniture more stable.
• When making a piece of furniture, different cardboard is chosen, which can be single-layer, two-layer or three-layer. The thicker the material, the stronger it is.

In principle, even from cardboard you can create practical furniture for domestic use. And what can we say about arranging a dollhouse - there are no limits to imagination. Use such a simple and accessible material to create various crafts - beautiful, original, applicable not only for decoration, but also in everyday life.