How to remove condensation from cold pipes. How to eliminate condensation on cold water pipes - causes of occurrence, ways to solve the problem

Many people are interested in how to eliminate condensation on a cold water pipe. Because this problem is encountered very often.

At first glance, damp pipes for supplying cold water are a source of dampness in the kitchen or bathroom. This phenomenon can also cause mold to appear.

These factors will shorten the period between system repairs in a wet area. Why condensation occurs and how to counteract it will be discussed further.

Most often, water supply condensate from cold water appears due to insufficient ventilation in the room. It is for these reasons that moisture collects in droplets in a system transporting cold water.

This is fully aided by moist air. For these reasons, before installing cold water pipe products, it is recommended to create a thermal insulation layer that will prevent any temperature changes on the top of the pipe.

This problem also occurs when the cold and hot water pipes are close together.

If there is such a problem in a bathroom or bathroom, it is recommended to check the functioning of the ventilation at the very beginning.

Behind long time it could get clogged. Problems in the ventilation network are clearly visible when closed windows if there are plastic windows in the room. This can be checked very easily.

ADVICE! If you take a sheet of paper and apply it to the hood with the plastic windows, and then do the same with open windows, then the difference will be visually noticeable. If there is no ventilation, it will be visible immediately.

And one more feature in the bathroom is the layout of pipes with cold and hot water. They are often carried out in close proximity, without laying thermal insulation.

It is not surprising that in the place where water is supplied to the plumbing, the pipes begin to “cry”. On open wiring it is easier to eliminate condensation.

But, in a situation where the network is hidden in a wall, resolving the issue entails more complex work. This will also include repair activities, because the geometry of the structure will most quickly have to be changed.

When considering the causes of condensation in cold water pipes in a bathroom or bathroom, it should be noted that in general the situation is similar to the one described above, but one “BUT” arises.

In these rooms there are an order of magnitude more pipes, and the space, as a rule, is smaller. And here, even at the installation stage, it is necessary to resolve the issue of thermal insulation of pipes.

How to solve this problem

And she deserves special attention. Can be purchased special material, which can be easily purchased at any hardware store for little money.

It doesn’t matter if you don’t have this at hand, you can use improvised means. Polyurethane foam and corrugation can save the situation.

The volume of corrugation should slightly exceed the volume of pipe products laid in the network. The process of action itself is simple to the point of banality.

The corrugation is pre-cut into the required pieces, and they are put on the pipes. The empty space is filled with polyurethane foam. At this point the mission is considered completed.

Video

There is another very simple method that will help eliminate the appearance of water droplets on pipes. To work you need to prepare:

1. sanding paper;
2. phosphoric acid;
3. thick thread;
4. strips of old fabric;
5. putty knife;
6. acetone.

Procedure:

• Any pieces of unnecessary fabric are cut into strips no more than 7 cm wide, which are rolled up. It is recommended to prepare them in reserve so as not to be distracted while working.
• The pipe is plastered, otherwise the material will not adhere firmly to it. Then it is degreased with acetone.
• At this stage, a rust converter is applied, and when the pipes are dry, putty is applied to them. This material hardens instantly, for this reason, you will have to act quickly.
• The prepared pipes are wrapped with fabric strips, so that each subsequent turn overlaps the previous one. The final coup is tightly tied with a cord.
• Thus, the fabric strip insulation is applied in several layers.
• The procedure is completed by applying an epoxy layer. When it is completely dry, the pipe products are sanded and paint of the selected shade is applied.

How to get rid of condensation on plastic pipes

A common cause of condensation is leaks in plumbing fixtures. If the workpiece supplying water to sanitary fixtures gets wet, then breakdowns may occur in the tap, in shower mixer, in the inlet valve of the toilet tank. A wet riser may indicate that there are leaks in the neighboring apartments above.

If the pipe network is made of plastic, then the problem of how to eliminate condensation on plastic pipes is solved as follows:

• The hoods are checked and the ventilation grille is replaced with a compact fan.
• The network is insulated using special pipes with a cut. These products are offered in every hardware store. They are made from energyflex and foamed polyethylene. This is a very simple method, only before starting insulation, you need to thoroughly dry the pipes.
• Complete insulation of plastic pipes can be ensured by the use of fabric strips and plastering. Above there is detailed description how it is done.

Features of metal water pipeline

Video

The problem is how to eliminate condensation on water pipes ah from metal is no less acute than in previous situations.

If metal water pipes are constantly exposed to drops of water, they will quickly be damaged by corrosion.

The following actions help eliminate condensation from metal pipes:

1. The pipes are protected from rust, dried and opened with drying oil and oil paint.
2. Cover with carbonate. This is a paste-like product for sealing cracks in walls and floors; it is applied in a layer of 0.5 cm. This composition should harden for 24 hours, and then the surface is sanded with fine sandpaper and painted with oil paint.
3. Projector primers. They consist of zinc dust, which is diluted with drying oil. The line is opened with this composition, and then it is painted (with enamel).
4. The toilet line can be treated with a product based on drying oil and red lead, or with special primers (for example: FL-031, FL-053).

Advice! In the bathroom, the cold water supply line can be painted with any type of enamel, but hot water supply pipes can only be coated with oil-resistant enamels.

How else do you deal with condensation?

Video: how to eliminate condensation on plastic water pipes

Elimination of condensate on pipes is not simple task, without determining the exact cause of this phenomenon.

Experts express this opinion on this matter.

• Professional plumbers advise purchasing Corrugated. This is a special composition that can be bought at building materials stores. It is applied to the surface of the pipes and forms a strong and elastic film there, which prevents moisture from appearing.
• Experts are also confident in the effectiveness liquid thermal insulation, which is applied to a dry and cleaned highway.
• If all plumbing and pipework are in good condition, then condensation can accumulate due to the difference in temperature between the pipes and the air. In this situation, only insulation of the system will help. The most suitable option For such insulation, professionals call foamed polyethylene or Merylon, which are not difficult to buy at any building materials store at a low cost. This insulating material is attached by placing it on the pipeline. Secure it with a clamp and wire.

Video

IMPORTANT! Experts warn that it is possible to eliminate fogging of the water supply system supplying cold water. different methods. Which one to choose can only be decided after a thorough analysis of the situation.

The fact is that in addition to the main ones, there are also side effects that lead to the formation of condensation. The source of dampness is evaporation from the basement, poor waterproofing and insulation of the walls.

Because of this, condensation and frost appear. In such situations, there is only one way out - insulating the floors and walls in the house with high-quality material.

In addition to the reasons already listed that lead to “wet” troubles, there are others. For example, weather conditions. Frequent and prolonged rains, close location of a body of water, proximity groundwater also significantly increases the moisture level in the house.

You can reduce it by installing a moisture absorber or an air conditioner that has a dehumidifying function. Moisture absorbers offered at modern market– an excellent method for removing moisture.

Video

These are plastic boxes containing absorbent tablets. When using these devices, they not only get rid of fogging on pipe networks, but also eliminate humidity throughout the entire house.

Experts can advise you on how to eliminate condensation on a cold water pipe. If you entrust them with this task, you can be sure that they will quickly and effectively eliminate the causes that lead to dampness in the apartment. And in this case, you won’t have to worry about people’s health.

Small droplets of condensate form on cold water and sewer pipes in apartments and private houses all the time. Most often this process can be observed in the summer. Despite the fact that this phenomenon is considered natural and quite natural, it causes a lot of inconvenience to many. We are trying to come up with something, but still, when we see condensation on the cold water pipes, we don’t know what to do. Why are these droplets so harmful?

It would seem that harmless condensation can create significant problems for the owners of an apartment or house:

• Accumulating and uniting, drops of water end up on the floor and form whole puddles there, which can even flow to the neighbors below. The floor covering may suffer so much from this that after a couple of years it will have to be replaced.
• Harmless drops also greatly reduce the service life of the water supply system, because it is an aggressive environment for metal. Pipes rust, become deformed and after some time will require major repairs.
• Condensation on pipes in the toilet, kitchen or bathroom can cause an unpleasant damp smell. But the smell is not so bad. It is much worse that the consequence of this is the formation of fungus and mold. Bacteria also multiply much more actively in a humid environment, putting people living in an apartment at risk of disease.

Reasons for the formation of droplets

Why does condensation form on pipes? Most often this happens due to the difference in temperature between the surface of the pipes and the air in the room. And if there is no ventilation in the room, or it does not function well enough, then nasty drops will definitely appear. Too humid indoor air also contributes to this. Moisture quickly settles on risers and pipes carrying cold liquid. Every room has its own causes of condensation.

Wet pipes in the toilet

In the toilet to the most common reasons condensate settling on pipes can be attributed to:

Condensation in the bathroom

To know how to deal with condensation on pipes in the bathroom, you must first find out the cause of this phenomenon. Some factors are similar to “toilet” ones, but there are also some nuances:

How to get rid of moisture on pipes?

There are several ways to remove condensate from pipes:

Ventilation

Inspect the vent. If you find debris, cobwebs and dust deposits there, you must thoroughly clean it all. After this, it is advisable to purchase a special fan, which is installed instead of ventilation grille. Plumbing and building materials stores have a lot of such devices from various manufacturers. They can vary in power, price and design.

New tank

In the toilet, the problem of condensation can be solved with the help of a double tank. Inside such a device there is an additional plastic container, into which cold water is collected. The outer walls do not cool too sharply, and therefore are not covered with drops of water. The downside is the high cost of the tank, which is most often sold only as a set together with the toilet.

Natural ventilation

If your bathroom or bathtub does not have supply and exhaust ventilation, organize life in your home so that everyone who takes a shower or bath leaves the bathroom door wide open when leaving the bathroom.

Thermal insulation of pipes

How to get rid of condensation on cold water pipes by thickening the walls? To reduce the temperature difference between the air and the pipe, it is advisable to insulate the pipe. You can find several items in stores modern insulation materials. They are characterized by high fire safety, high thermal insulation properties, ease of installation, tightness and a completely low price. Special cases made of foamed polyethylene - energyflex - are very popular now. This material is very flexible, so installation should not be a problem. And multiple closed pores will protect very well from temperature “inconsistencies”.

To put the pipe in the energyflex you need to do the following:

• dry the pipe thoroughly, after wiping it with a dry cloth;
• the energyflex pipe must be cut lengthwise;
• starting from one edge, gradually put the insulating material on the entire pipe with cold water;
• the longitudinal seam of the energyflex is fastened with clamps or sealed with glue;
• if the pipe is long, then, using several pieces of insulation, you need to glue its ends together;
• After this, the insulating material, if desired, can be painted with paint from an aerosol can.

Another pipe and foam

How to eliminate condensation on a cold water pipe using improvised materials? If for some reason you cannot buy this modern insulating material, then you can try using plastic pipe with a little large diameter and polyurethane foam. The plastic pipe is also cut lengthwise and carefully placed on the water pipe. Then foam is injected into the annulus. This simple design will last long enough and will not interfere with repair work.

Note: Instead of a plastic pipe, many people use a metal corrugated pipe. You can also run polyurethane foam inside.

Rags

Another option is to use rags (bandages, any other cotton fabric) and epoxy putty. Before you begin insulating the pipe, it must be thoroughly cleaned of rust with sandpaper, and then degreased with acetone and treated with a rust converter. Only after this is the first layer of putty applied, which is immediately “bandaged” with cloth. When this coating has hardened, you need to apply another layer of epoxy.

Isollat ​​and other similar materials

When it comes to thermal insulation of cold water pipes, the universal insulating material “Izollat” helps a lot. This is a thermos paint in the form of a water-based suspension. After drying, the liquid mass hardens and turns into polymer coating with excellent thermal insulation characteristics.

Painting a pipe with Izollat ​​is very simple:

• thoroughly clean with sandpaper and degrease the surface of the pipe;
• apply one layer of insulating material;
• wait for it to dry;
• use silicone varnish to finish the pipe and give it a glossy shine.

Moisture absorbers

In large construction supermarkets you can find wonderful household devices - moisture absorbers. They will help you deal with the problem quickly and without hassle. Their design is quite simple: an absorbent substance is placed in a plastic box. It will help not only eliminate condensation on the pipes, but also get rid of excessive humidity in the entire room.

Air conditioner

This is the most expensive option, but some people use it. Installing a climate-controlled air conditioner will ensure a constant optimal level of humidity.

What to do when water condensate remains on the pipes all the time? When you see water droplets in your apartment's waterways, don't ignore the problem in the hope that "it will somehow go away." Try one of the above methods and unpleasant consequences can be avoided.

A common phenomenon today is the formation of condensation on a cold pipeline, which greatly worsens the appearance of the bathroom.

Pipes sweat, become damp, and therefore last much less.

Therefore, such a problem must be eliminated very quickly. However, in order to deal with the consequences, it is necessary first of all to understand why such situations arise.

Why is it formed

People living in apartment buildings, can quite often encounter a similar phenomenon. Moreover, there are many reasons for its occurrence.

Most often, condensation forms on pipes through which cold water flows.

The main reasons for its appearance are considered to be:

• poor ventilation in the room;
• constant supply of water to the tank;
• one of the shut-off elements allows water to pass through (this could be a filter or faucet located in the bathroom, kitchen or any plumbing);
• temperature environment significantly lower than the indicators in the house;
• increased humidity level or water leakage from neighbors above.

That is why it is necessary to regularly ventilate the bathroom or create constant air circulation there. However, in the case of non-stop operation of the tank, moisture will form not only on the riser, but also on the pipes going further.

The situation is similar in case of problems with the flow of the mixer. As a rule, the causes of “fogging” of pipes are several similar problems at the same time.

Master's Note: in the event of sudden condensation on the pipes, it is worth remembering what specific changes you have made in the house or apartment in Lately. So, this could even be changing windows, as well as installing certain heating equipment.

Possible consequences

“Fogging” of water pipes is not just the formation of water droplets. First of all, this is a very aggressive environment that negatively affects the metal pipeline.

In such conditions, products will be highly susceptible to corrosion and, accordingly, fail. Also, if condensation forms, which greatly increases the humidity, a damp smell appears. This in turn creates excellent conditions for the appearance and reproduction of various bacteria, in particular fungi.

Note: To initially avoid condensation on the pipes, it is recommended to use polypropylene options. In this case metal pipes will only be located near the meter.

If you do not notice the appearance of condensation in time, and also if its formation is very abundant, this can lead to water dripping onto the floor. Prolonged exposure to moisture flooring will cause the need to repair the toilet.

Necessary actions

In the event that small drops of water begin to form on your pipes, you need to carry out a certain set of actions:

1. First of all, it is necessary to check the ventilation for its functionality. To do this, it is enough to ventilation hole bring a thin and oblong sheet of paper. If it is pulled inward, then the operation of this system is normal, otherwise it is necessary to find and fix the problem in the hood. When your bathroom has forced ventilation, you need to launch it and check if it works properly. If everything is fine, but the condensation does not disappear, the problem is different.
2. After this, check the shut-off valves, mixers, and operation cistern. If there are problems in their work, it will be immediately obvious. The presence of a leak must be eliminated. This may require either repair or replacement of a specific element.
3. Also, the cause of the problem may not even be in the apartment itself, but on the riser above. In this case, you need to go to your neighbors and check where the water supply pipe is leaking.

Note: If all of the above systems are working correctly, but the pipes continue to get wet, the main factor in the appearance of moisture will be the large temperature difference between the water in the pipe and in the apartment.

Installing new heating systems, as well as new windows, has a big impact on the temperature level of your apartment. At a room temperature of 18°C ​​or more, without good ventilation, condensation will constantly form.

Use of special means

In the case when the cause of “sweating” is a significant temperature difference, then to eliminate it it is necessary to insulate the pipes.

As insulating material Many types of pipes are used to protect pipes from condensate. various materials, depending on the specific situation.

The easiest way is to use pads made of foam material. They look like soft pipes with a longitudinal section. It's important to choose right size so that there is no space left between the material and the pipes.

Very effective method, however, and more expensive - this is the use thermal insulation paint. To properly insulate the pipes, it will need to be applied in about 5 layers, allowing each layer to dry.

Also, applying paint requires forced ventilation, which a regular fan can help with.

In addition, plastic linings are also used for decoration. In this case, the space that forms inside these elements will need to be filled with ordinary polyurethane foam.

Take into account: Before starting insulation work, we must not forget about the need for preliminary drying, because wet pipes cannot be insulated.

All of the listed methods for solving the problem of “sweating” are the most effective. However, if you don't have required quantity money to purchase such expensive coatings, you can even make thermal insulation with your own hands. It is also possible to use chemicals“Graphotherm”, which will help eliminate fogging at any temperature.

Making your own insulating material

In fact, making suitable insulation yourself is very simple. To do this you need to have standard set tools.

As insulation, you can use a regular sheet, bandages or any other similar materials. Large and wide canvases must be cut into long strips, the width of which is no more than 10 cm.

After this, you will need to strip the pipes themselves of paint, as well as degrease their surface. To process them, use conventional nail polish removers. And then you need to clean the pipes from the rust on them using special means.

When the preparation stage is completed, the insulation process itself begins. First you need to apply a small layer of putty to the surface and, without waiting for it to dry, wrap the pipe with the prepared cloth.

It must be applied in such a way that each subsequent turn overlaps the previously laid one. In this case, the material should be well saturated with putty.

Finally, you need to cover the surface with putty and wait for it to dry. After this, the pipe is sanded and painted in the required color.

There is no need to leave condensation problems on the outside of pipes unattended. Besides them appearance, this also damages the integrity of the pipes, causing them to fail faster.

That is why it is necessary not only to remove the drops that appear, but to get rid of their formation. However, it is better to take care of this in advance to avoid negative consequences.

Watch the video that explains how you can get rid of condensation on pipes using heat-insulating paint:

Why does condensation appear on cold water pipes, what to do in this case? Condensation is a common problem, and it can appear on both metal and plastic pipelines. At first glance, the problem is insignificant, but over time it causes a lot of trouble in the form of rust, mold and unpleasant odor. That is, you still need to get rid of condensation. To do this, you need to find out the reasons for its appearance. Why do pipes sweat?

Why does condensation appear on cold water pipes?

Most often you can see condensation on the pipes in the toilet. One of the reasons is a water leak in the tank. The water is constantly changing and does not have time to warm up, hence the humidity. We get rid of the leak in the tank - this reason will disappear.

Sometimes puddles appear near the riser due to excessive humidity. This means that the neighbors living above have a leak in the tank. At night, listen to the gurgling of water in the sewer, and you will immediately understand everything.

Condensation also forms due to high humidity and temperature changes. To avoid condensation, good ventilation is necessary. To start, simply leave the toilet door open overnight; you may find a dry pipe in the morning.

The reason is obvious - the ventilation pipeline is clogged. Unscrew the grille to ventilation duct and clean everything very well. A draft should appear in the ventilation duct.

If there is ventilation, but it does not cope with the problem, you can install an exhaust fan. It attaches in place of the vent and you turn it on as needed.

The choice of fans in modern construction supermarkets is huge, for every taste and at any price. Recently, the installation of such fans in toilets and bathrooms has become very common.

How to fix the condensation problem

How to get rid of condensation on pipes in the bathroom? The pipes in the bathroom also sweat. The reason may be similar. Condensation on the riser means problems with the neighbors' plumbing. The pipeline supplying water to your plumbing becomes wet; the faucet is not working properly. The absence of a hood, as in the first case, aggravates the problem.
If hot and cold water systems are very close to each other, fogging cannot be avoided.

It is necessary to insulate the pipes; this is an excellent protection that will remove condensation.

Often condensation forms on the pipes in the bathroom due to a faulty faucet. Leakage of water helps to cool them. There is only one way out - faucet repair!

How to get rid of condensation? Pipe insulation will completely eliminate fogging of pipes. It is necessary to isolate cold water pipes from interaction with external environment. There are special thermal insulation materials that can be used to rid pipes of condensation. You just need to buy such material and insulate the pipelines. The abundance of such materials in the construction materials market is very large.

If you prefer a budget option to eliminate moisture on pipes, and do not plan to buy expensive thermal insulation material, you can use other ways. You need to purchase a cylinder polyurethane foam and a plastic pipe or corrugation, the diameter of which exceeds the diameter of the pipe with condensate. The corrugation or pipe is cut into pieces so that they can be put on the problem pipe, then they are put on and the voids are filled with polyurethane foam.

There is another budget option for getting rid of condensation. You will need sandpaper to remove rust and acetone, so that after this it is good to degrease the problem surface. It is best to treat the pipeline with phosphoric acid and then apply a layer of epoxy putty on it so that it does not drain.

Then immediately wrap the pipeline with previously prepared strips of fabric so that the material is saturated with putty. You can use an old sheet by cutting it into bandage-like pieces. The putty and fabric will harden quickly.

You can do this several times in the same way. The work ends by applying finishing putty. It will look aesthetically pleasing if the putty is sanded and coated water-based paint the color you need.

In most cases, insulating pipes can solve the problem of condensation, but sometimes the level of humidity in a house or apartment is so high that waterproofing the floors and walls is necessary.

The formation of tiny water droplets on pipes, both in apartments and in private housing, is a common phenomenon. This process is typical summer period and covers the surface of both free-flow sewer and “cold” water pipes. The phenomenon of condensation in itself does not pose a problem. But its significant accumulation with subsequent dripping leads to the formation of puddles on the floor, as well as the risk of flooding the neighbors below. The accumulation of condensate on pipes can significantly shorten the service life of the water supply system, which leads to unplanned repair work. Excess moisture on pipes causes unpleasant odors and dampness in kitchens, toilets and bathrooms, which contributes to the development of fungus and mold.

Most often, the appearance of moisture on pipes is caused by the temperature difference between the surface of the pipes and the room. In addition, poor room ventilation contributes to condensation on cold water pipes. Because of humid air sewer risers and pipes carrying cold liquid are prone to droplet evaporation.

Cause of wet pipes in toilets

Wet evaporation is caused by excessive vapor content in the air or by temperature changes. The most common reasons for condensation settling on pipes in a toilet room include:

1. Poor ventilation of the room. You can verify the presence of this particular reason by leaving the door unlocked overnight. toilet room. The discovery of dry pipes in the morning indicates poor-quality convection.
2. Constant tank leak. Due to the liquid inside the pipe not warming up, it constantly changes cold. The pipe cools even more and becomes covered with condensate droplets. Eliminate this problem You can check and put in order the outlet valve and tank taps.
3. Neighbors have a leak. In this case, it is possible to temporarily eliminate the condensation moisture that appears on the pipes by winding several turns of bandage and lowering the end into any container. At the same time, it is important not to forget about promptly pouring out accumulated water.

“Fogging” of pipes in the bathroom

The answer to the question of why condensation drizzle forms on bathroom pipes lies in the same reasons as on toilet pipes.

1. Insufficient level of ventilation. During operation, the convection system becomes clogged and dusty. It is necessary to unscrew the grille that serves as a blocking of the circulation channel and thoroughly clean it. The reason for the appearance of condensation moisture is confirmed by the appearance of draft, which is checked using match ignition.
2. Features of installing a water distribution system in the bathroom. Often pipes are installed close together without proper thermal insulation. This is what causes condensation to appear on the cold water pipes leading to the mixer. When making eyeliner open type Any heat insulator can be used. When laying it in the wall, more serious and complex manipulations are required, including repairs.
3. Mixer failure. The liquid dripping from it becomes not only a financial nuisance, but also the reason for the constant cooling of the pipes. Even at night, heat exchange processes between pipes and air are noted. This problem can be solved by repairing the faucet.
4. Riser leaks from neighbors. This problem can only be solved for a certain period of time. A bandage or rag is wrapped around the pipe, the ends of which are brought out into a pre-prepared container. In this way, the water will directly flow into this container, thus preventing the formation of a puddle.

Tips for eliminating condensation moisture on pipes

To avoid wet spots on the floors, pipe sleeves are installed that are three times larger than the wiring itself. Thanks to the installation, long-distance repairs or replacement of pipes are facilitated.

To begin with, it is necessary to strengthen ventilation system. Room humidity of up to 50 percent is considered normal. After which the leak is eliminated cistern and mixer. If improving ventilation and repairing fittings cannot cope with the appearance of condensation on pipes, then before installing pipes inside the wall, it is advisable to provide an additional thermal insulation layer that prevents significant temperature fluctuations on the surface of the device. The most simple method To eliminate condensation, simply cover the pipe with special heat-insulating materials (paint), purchased at hardware stores. It is worth considering that the paint is applied to the surface of a dry pipe with the cold water previously turned off.

It is worth thinking about purchasing special insulating pipes equipped with a cut. Such pipes are presented in various sizes. Before using it, wipe the surface of the pipe from condensation. If it is impossible to purchase an insulating pipe, it is allowed to use polyurethane foam, which is the best remedy in the fight against condensation.

You can use the reliable Grafotherm product, which promotes the formation of a film on the pipe, minimizing the formation of condensation. If the cause of damp pipes is a leak in a neighboring riser, then you need to talk to your neighbors about replacing the pipes.

After taking a bath or shower, you must leave the bathroom door open. It is necessary to monitor the thermal condition of the pipes: they should be warm, not cold. The simplest and effective method To combat condensation on cold water pipes, they are wrapped with rags. This method is economical and quite effective. Its unpopularity is due to the damage to the appearance of the pipes and the entire bathroom.

An important reason for the occurrence of moisture in pipes is the presence of cold floors, poor foundations, uninsulated walls and basement fumes. Unfortunately, this problem can be resolved by cosmetic repairs will not work. More global measures will have to be applied. In addition, weather conditions, for example, rain and prolonged frosts, or a nearby body of water can also fail. For such cases, it is advisable to use a moisture absorber, which is purchased and installed on the table. The most reliable way to protect pipes from condensate liquid is to purchase an air conditioner that heats the air.

Thermal insulation addition to pipes

Under the most simple option This implies the purchase of factory-made heat-insulating raw materials, for example, K-Flex, penofol, energy flex and others. In addition, preference is given to porous materials, polypropylene foam, basalt fiber raw materials, self-adhesive tape, and so on. That is, pipe insulation Any heat-insulating raw material can be used. If purchasing such material is not possible, then it is recommended to use: