Homemade rocking chairs. How to make your own rocking chair from steel or plastic pipes

A rocking chair is a fairly popular piece of furniture in the home and garden. It will be pleasant to relax on such an armchair, sitting on the terrace. Today you can buy it in almost any furniture store, but such a product is expensive, so it is better to make it yourself.

For this you have to stock up quality material, which has moisture-repellent properties. It is important to remember that plywood processing requires compliance with certain rules. You will also need tools for the job, for example, a cutting tool that has fine teeth.

Materials for the chair

In a factory environment, such models are made from different materials, it could be:

  • rolled steel;
  • solid wood;
  • plywood.

The latter is ideal for doing the work yourself. Solid wood is also used - the resulting chair is aesthetically attractive and durable. It can be integrated into the interior of the apartment and the exterior of the garden. Rocking chairs began to be made from plywood relatively recently. Factory-made options are much cheaper, but they also don’t look as attractive as those made from natural wood.

Should I use plywood?

If you are wondering how to make a rocking chair, you must decide whether to use plywood for this. The material described is a canvas made of thin layers wood different breeds. At the production stage, a thin layer is removed from the log, which is repeatedly glued together using a special compound into a separate slab.

Plywood has a high margin of safety, and its texture is similar to natural wood. Before you make a rocking chair, you will need to select the material. By choosing plywood, you can save money and also ensure ease of processing of the material. In addition, plywood has a fairly attractive appearance and high strength.

Canvases can be found on sale different thicknesses, which allows you to choose the best option for a specific type of structure and load. A rocking chair made of plywood is made by hand quite often. If you also decide to follow the experience of the masters, you should also learn about the disadvantages of this material.

Disadvantages of plywood

The disadvantages of the material are expressed in low moisture resistance and weak ends. If the canvases are not treated with a special compound, then it is better not to use them for making garden furniture, which most time will be spent on fresh air. Over time, such a chair will certainly deteriorate. As for the instability of the ends, they will also need to be protected, otherwise the material will delaminate over time.

Preparation of tools and materials

If you are making a rocking chair for your dacha, you can be sure that the assembly work will not be difficult. However, you will first need to stock up on some materials, including:

  • plywood;
  • set of fasteners;
  • wood glue;
  • cardboard.

A rocking chair made of plywood cannot be made with your own hands if you do not take care of having a set of tools. To cut and assemble a piece of furniture, you should prepare:

  • electric jigsaw;
  • chisel;
  • ruler;
  • pencil;
  • needle file;
  • hammer;
  • square;
  • roulette

As for the most important material - plywood - you will need three sheets. Their thickness should be equal to 20 and 15 mm - this difference will be useful, because you will be making different elements, each of which is subjected to a certain load.

It is better to purchase sheets of standard sizes, which are 1520x800 mm. When a rocking chair is made, drawings must be prepared. But it will be impossible to start work not only without them, but also without wood screws. But to connect the workpieces together, wood glue is useful. It will be used where self-tapping screws cannot be used.

To make a set of patterns, you need to purchase cardboard. Using the patterns, you can apply the contours of the parts to the surface of the plywood. A jigsaw must come with a set of files. It is better to prefer files with medium or small teeth, because the material being cut has several thin layers, and large teeth will simply tear the edge.

Making a chair

A rocking chair for a summer house must be made according to a certain pattern. It involves the assembly of a product that consists of a frame. It will be based on two parts:

  • sidewall;
  • cross bars.

Once manufactured, you can add a soft mattress to the structure itself, which will make this piece of furniture more comfortable. When making the sidewall, you should give it the shape of a boomerang. This design will fit into a room with any design. The crossbars are made from the same plywood; they are required to connect the two sidewalls. You will need 14 of these elements for assembly.

Stops are required to install the cross bars. They are made from a bar whose cross-section is 20x40 mm. The timber must be cut into separate pieces of 50 mm each. The height of the chair will be 1 m, its width and length should be 0.6 and 1.2 m, respectively.

Work methodology

The dimensions of a plywood rocking chair have been mentioned above, but you can design the design yourself. In any case, the order of work will remain the same.

Manufacturing should begin by preparing a template that will determine the size and shape of the side parts. The template should be drawn on a piece of cardboard. The boomerang should have a large lower radial part - this will allow the chair to swing without jerking.

Once the outline lines have been drawn onto the surface of the cardboard, you need to cut out the template using scissors. Now the craftsman has to transfer the marks onto the surface of the plywood sheet in order to make two parts from one sheet with a minimum amount of waste. Once the outline has been drawn, you can begin cutting out the side parts.

When making a rocking chair from plywood with your own hands, on next stage the ends of the parts must be processed using sandpaper. It is important not to leave burrs. Now you need to cut out the transverse strips - using 15 mm plywood. There should be 14 of these strips, their length and width will be 600 and 40 mm, respectively. After completion of the work, each plank should be sanded using sandpaper.

Now you can prepare the stops for the cross bars. They are made from timber, the cross-section of which is 20x40 mm. There will be two stops for each crossbar. On each side part, markings are made for thrust bars. The line should follow the top end. In this case we are talking about the attachment line.

It is important to pay attention to the step between the bars - it should be the same. Once the installation line of the bars has been marked on one side, the marks should be transferred to the other side. If this is done, you will need to fix the thrust bars. They are attached with wood glue. It is applied to the surface of the bar and sidewall. In order to ensure high reliability of fastening, you should additionally use wood screws.

The two sidewalls must be fastened together with transverse strips. The first and last ones are installed first, then you can move on to the rest. They are fixed to the thrust bars with glue and small screws. Before screwing them in, holes should be made in the strip to prevent the material from splitting. Ready frame for final stage processed protective agent. It is covered with stain in two layers, after which you can begin to apply varnish.

for a rocking chair?

Quite often, home craftsmen wonder how to bend plywood at home. You can give the desired bend to almost all types of this material, no matter how thick they are. Such manipulations may be necessary if the plywood is installed not across, but along the frame.

At all, flexible plywood sold in construction stores. Usually it has a small thickness (within 4 mm). It's great for different designs. The part is cut to size and then fixed to the frame with screws. Optimal combination quality and price is considered plywood made in China. It is quite flexible and has acceptable performance characteristics. If the work involves using a more rigid type of material that needs to be bent, then you can use a combination of several methods, including:

  • gluing;
  • stabbing;
  • steaming.

Steaming plywood

If you are making a rocking chair, the drawings of which are presented in the article, you may need to bend the material. To do this, it is better to use the steaming method. You will need a container of boiling water or an iron that has an uninterrupted steam supply function.

The sheet can simply be wetted - the soaking time will depend on the thickness of the material and the direction of bending. After the part has been soaked, you should attach it to the template and fix it, allowing it to dry completely. The maximum permissible bending is possible when bending across the fibers. If you have to work at home, it is better to combine humidification and steaming. Only the area that should be curved should be steamed; only moisturize upper layer veneer

DIY collapsible chair

If you are making a collapsible rocking chair made of plywood, then you will have to use a different technology. For this purpose, the frame is made of solid wood, as it will withstand higher loads. Inner part, which will look like a chair without legs, can be made from plywood.

The two parts of the chair will be connected to each other using special hooks, which can be purchased at a hardware store. In this case, the piece of furniture will occupy less space after disassembly. The pattern for a rocking chair made of plywood in this case is also depicted on cardboard. The side parts will look like two racks different sizes with a cross member that connects these two elements. The lower part is also made in the shape of a boomerang.

Reading time ≈ 10 minutes

Comfortable furniture- this is one of the important components home interior. Everyone associates a rocking chair with comfort, because it is so nice to sit in it by the fireplace with a cup of tea and relax. This piece of furniture can fit into any style and also serve as an independent decor. You can make a rocking chair from wood yourself; to do this, consider photo examples with drawings and progress of work.

Design Feature

You can swing on the chair anywhere, calming your nerves and relieving stress. This is one of the simplest and available funds for relaxation. You can buy it in furniture stores, order it on the website, or make it yourself in a home workshop.

Why is the rocking chair so popular:

At the same time, you can place the chair anywhere: in the bedroom, in the home office, on the terrace of a country house, and even in the office. How to make a rocking chair with your own hands from wood using photos and drawings will be shown in a video with the progress of the work and detailed instructions.


U wooden structure has its advantages:


The main part of the rocking chair is arc-shaped skis or runners, due to which rhythmic rocking occurs. If the runners are made long, the amplitude and depth of the swing will be large, you can smoothly move from a sitting position to a lying one. And if you assemble it with short runners, the swings will be insignificant, soft and smooth. These chairs are more suitable for older people.

Wooden chair on runners

Types of chairs

Today you can find great amount models of wooden rocking chairs of various shapes, sizes, breeds, styles and purposes.

Rocking chairs are:

To make a rocking chair for your dacha with your own hands from plywood, you will need drawings and instructions experienced craftsmen as in the video below.


Depending on the type of chair design, there are:

How does rocking happen?

Many people assemble rocking chairs according to ready-made drawings, but the products may not always fit the size of a particular person. Therefore, before starting production, you should understand the kinematics of this product:

  • If a person stands upright, the center of gravity (CG) of the body is between the lower back and the sacrum inside the spinal column. If a person is in a sitting position, the CG shifts slightly forward and down. In rocking products, the overall CG is always shifted back and down to its original position. In this case, there is a slight error in the projection of the main center of gravity in relation to the supporting surface (floor, soil, etc.), which can be corrected at the end during balancing.
  • The stability of the structure is most affected by the displacement of the overall CG relative to the vertical central axis (CO). If the CO coincides with the COG, this is a state of free balance, which is impossible to achieve in a rocking chair. If the center of gravity is greater than the center of gravity, there is a high probability of tipping backwards. It is necessary that the central center is 450 mm or more higher than the central central point (recommended excess is 600-700 mm).

In other words, the overall center of gravity of the rocking chair should be shifted from the seat to an angle intermediate between the back and the seat. The supporting legs are two arched strips, thanks to which smooth swinging is possible. The amplitude depends on the length of the runners.

How to choose material and design

Modern models of rocking chairs are made from various materials, each of which has its own characteristics:


To make a rocking chair from solid wood, it is best to use conifers: larch, pine, alder or spruce. The density and weight of such wood are low, which is very convenient when working with the material.

Tips from the experts:

Assembly steps

Modern furniture manufacturers are ready to offer a huge range of models various forms, colors, styles and materials. However, if there is time and desire for self-assembly home rocking chair, you need to safely purchase everything necessary materials and get to work.

The simplest model

Tools and materials:

  1. Screwdriver or drill.
  2. Tape measure for measurements.
  3. Self-tapping screws.
  4. Special wood glue.
  5. Electric jigsaw.
  6. Thick cardboard for patterns.
  7. Sandpaper for sanding.
  8. Sheet of plywood.

Step-by-step instruction:


How to make a rocking chair with your own hands is shown in the video master class with detailed step-by-step instructions.

Rocking chair with curved skis

For assembly you will need:

  1. Tape measure for measurements.
  2. A simple pencil.
  3. Graph paper.
  4. Screwdriver.
  5. Electric jigsaw for working with wood.
  6. Sander.
  7. Metal confirmants.
  8. Wood board for cutting skis 300/20/4 centimeters.
  9. Board for frame 300/10/2 cm.

Country chair with curved skis

Step-by-step assembly instructions:


In most cases, additional balancing of the product will be required so that the chair does not cause inconvenience when rocking, sitting down and standing up.

How to balance a swing structure:


A rocking chair will always remain a desirable piece of furniture, because it is so pleasant to sit in it and forget about all the problems. It is not at all necessary to spend a lot of money on a purchase; you can make such a product yourself. A ready-made instructions and the drawings will help with this.

A rocking chair is always associated with a quiet, peaceful evening dedicated only to relaxation.

Of course, you can use it at any time of the day, but you won’t be able to relax the way rhythmic and rocking movements allow you to do anywhere else.

That is why this piece of furniture today can be found not only in the garden, but also in reputable offices. Moreover, many companies equip break rooms with them.

A rocking chair allows you to relax not only the body, but also the brain.

Scientists have long proven that rhythmic, repetitive movements, such as walking or rocking, help you calm down, concentrate, and put your thoughts in order.

The most complex tasks in such an environment it is much easier to solve problems.

If you know at the dacha, then a high-quality, fresh lawn will always be a source of pride and admiration for your guests. Details in the article.

Sunny and varied astilbe: planting and care open ground depending on the plant variety. What for different types astilbe?

Ideal choice for a summer residence

A mandatory part of any recreation area on the site. The most popular models are made from wicker, artificial and natural rattan and forged.

Their advantages:

  • beautiful appearance;
  • strength;
  • resistance to moisture and ultraviolet radiation;
  • durability.

Of course, it is in the garden that a rocking chair is most appropriate. It can be installed in a gazebo, on or open veranda. Models from natural materials fit harmoniously into any landscape design.

They look beautiful and bright on modern estates Garden swing on runners made of metal and textile. For areas with log houses or timber buildings, it is more suitable wicker furniture or from an array.

If the design of the dacha is dominated by buildings and decorative elements made of stone - it is worth paying attention to artistic forging or cold bending.

Unusual design solutions can be a striking accent in the landscape. This rocking chairs for two, or original beds that can easily replace the usual sun loungers.

Variety of options

The history of the rocking chair goes back a little more than two centuries. And this wonderful idea belongs to a talented person, inventor and politician- Benjamin Franklin.

But in Europe it became famous and widespread only in mid-19th century. Today, models on skids are popular. It is precisely these rocking chairs that can be found on the pages of classics describing the life of the aristocracy and in modern gardens.

Relatively recently, it appeared completely new design. Sliding rocking chairs without runners. They are ideal for interiors with delicate flooring.

The materials from which such furniture can be made are amazingly diverse:

  1. It can be hard wood.Such chairs attract with their massiveness and reliability, while the variety of shapes and design solutions it's limitless here. It is among the wooden models that you can find both golden classics and avant-garde.
  2. Rattan and wicker – traditional material for the manufacture of rocking chairs. Their distinguishing feature– lightness and delicacy. Today, wicker furniture can also be made from artificial material. It is practically no different from models made of willow or grapevine or rattan, but at the same time it is not afraid of moisture.
  3. Metal– the material is plastic, but heavy. Forged furniture always looks luxurious. But, the weight of such products is significant. That is why, even in the garden, it is better to use them only on stone or concrete areas. Metal runners will sink into the ground and damage the lawn turf, wooden boards they also leave noticeable marks.
  4. Gaining popularity today plastic models. They are durable, resistant to any vagaries of weather and bright and modern design. Equally important is the fact that models made from this material are the most affordable.

Level hands and desire

You can also make a rocking chair with your own hands. This will require, first of all, desire and a little time.

The most popular materials self-made such furniture - wood, plywood and metal. What exactly to choose, everyone House master decides for himself. It depends on the availability of material and the ability to work with it.

Photo selection with ready-made rocking chairs that you can make yourself:

We use wood and plywood

This is perhaps the simplest and affordable option. To work, you will need tools that almost every home craftsman has.

The photo shows a drawing of a plywood rocking chair

You can watch how to make a rocking chair with your own hands from wood and plywood using only an axe, a plane and a saw in the presented video, but such work requires extensive experience in woodworking. This video is the first part of a whole series of instructions. In any case, this is a quality and real experience from a craftsman who can really show you how to make this piece of furniture yourself.

If you are not used to getting by only hand tools, then for work you need to prepare:

  • jigsaw;
  • screwdriver;
  • screws and drills of different diameters;
  • sandpaper of different grits for processing finished parts.

The easiest way to make a rocking chair out of wood with your own hands is use an old but durable chair. Its legs are shortened, and the resulting structure is mounted on hardwood runners.

To make it new and non-standard appearance it can be braided with leather or plastic tapes or sew an unusual cover.

More interesting models The easiest way to make it at home is from plywood with a thickness of at least 15 mm. The general idea is quite simple. The sidewalls are cut out of the sheets according to a pre-calculated pattern. For example, it could be like this:

Cutting out the sides

The edges of the plywood are carefully processed. The two parts are connected to each other by three bars 30x50x600mm.

The upper part is laid out with thin boards or slats of plywood with dimensions of 10x50x600 mm (the length can be longer if the slats need to protrude beyond the edge of the sidewalls), which are attached to the end with self-tapping screws.

To avoid cracking and delamination of plywood, it is recommended to pre-drill it at the fastening points with a small-diameter drill.

It is also worth making recesses in the facing strips so that the heads of the hardware are recessed.

If desired, they can be hidden with special plugs to match the wood or putty.

After assembly, the wood can be tinted and varnished or painted in any color.

Metal chair

Metal is a difficult material to process. And if there are no forging skills or equipment for making bent elements, then only simple models chairs, but they can be no less interesting.

First of all, a metal frame is made from a corner, pipe or profile.

After this, all parts are coated with an anti-corrosion compound. Hammer paints look very nice. What will it be decorative finishing- depends on the desire and imagination of the master.

For example, the seat may simply be made of wooden planks. Or the model may be soft. For this purpose, the seat can be braided with a regular luggage belt.

Sew pillows for the back and seat and hide everything with a common removable cover. It is also quite easy to braid the metal frame with willow vine. To do this, you will need the most basic knowledge of wicker weaving, which can be found on the Internet.

Your hand is the ruler

Although only two are presented in detail simple options, they can be implemented in different ways. Based on the recommendations given, you can assemble a wooden rocking chair of this type.

In the first video we see drawings for making a rocking chair with your own hands:

On the second there are tips and assembly instructions:

As you can see, in this master class more simple form sidewalls, but special attention is paid to design. Such a chair will look luxurious not only in the garden, but also in the office.

Experiment is the engine of evolution

By experimenting with the base of the frame, other models can be made using a similar principle. For example, with armrests.

If desired, this can be a whole furniture group for two people. This model not only looks very original, but will also allow you to relax in pleasant company.

Armchair for two persons

Moreover, all you need is a little imagination and the usual rocking chair turns into a comfortable couch with an awning. You can relax on it in any heat. And if you equip it with a canopy made of mosquito net, then sleep on summer nights in the fresh air.

No less interesting and unusual are the ideas of home craftsmen for models on metal frame. They can be openwork and almost weightless.

Or simple, concise and modern.

To make such a model you will need welding and a pipe bender. Its design is extremely simple. And the seats can be either wicker or sewn from dense material.

From metal pipes You can also make a rocking chair in a classic style.

Rocking chair in classic style

No less interesting is the model in the patchwork style, in which a metal ring is taken as the basis of the seat. This chair is ideal for a country style cottage.

Rocking chair in country style

Making a rocking chair with your own hands is not just about creating an exclusive item, but an opportunity to make furniture that will be comfortable for you and will suit the design of your site. This is a great chance to show imagination and creativity.

(18 ratings, average: 4,33 out of 5)

Private personal plot is best place for rest and work. To have a good rest in nature, humanity has come up with many types of different devices, for example, a swing or a hammock. The best a convenient item furniture can be considered a chair. But one addition can be made to its design that will make it more convenient. Similar model helps to relax all the muscles of the body, and the slow and monotonous rocking encourages long thoughts.

The rocking chair design has gained immense popularity in the world. That is why, since its invention, it has appeared many rocking chair options. Masters claim that making a chair with your own hands is quite simple.

What types of rocking chairs exist for the garden?

To make a universal model of a rocking chair for a summer house, you will need a willow vine. Unique and simple design It will look great against the backdrop of various greenery and go well with the decor of a gazebo or country house. The main disadvantage of such a durable and lightweight piece of furniture can be considered the fear large quantity moisture.

Rattan is a very flexible vine, which is growing in Asian countries. This plant is also used to weave unique and beautiful rocking chairs. Their beauty is not inferior to products made from willow, but their strength is much worse. Metal fastening materials are not used in the manufacture of rattan furniture. Connections are usually made only with the help of high-quality knitting and wood glue.

When it comes to the service life and great durability of a rocking chair, best example models made from metal parts. A unique lace chair can decorate absolutely any country cottage area. Rocking chairs should be used not only as furniture for a country house. The main advantage of the product for office work It is generally accepted that it is solid and representative. Now there are models of rocking chairs from famous designers, which are made in various modern styles.

Many modern designs these pieces of furniture have a special uniqueness. Together with conventional models of rocking chairs, they can guarantee their owner great comfort and independence from conventional energy sources. A similar piece of furniture that is equipped with small solar panels, makes it possible to carry out free time with benefit and comfort.

How to make a rocking chair with your own hands

The design of an armchair has much in common with a sofa. When a lot of pillows or a blanket is thrown on such a piece of furniture, it is impossible to find anything better for relaxing in country house. Next, the process of assembling a rocking chair from plywood with your own hands will be described in detail.

DIY rocking chair tools

Making a unique rocking chair is quite simple. By purchasing good materials and having necessary tools, you can assemble this piece of furniture yourself in a short amount of time. To assemble a rocking chair You will need the following tools:

Good organization of the assembly process assumes that absolutely everything necessary tools will be located near the workplace.

DIY rocking chair: drawings

Every responsible work must begin from detailed drawing, which is needed in order not to make mistakes in required quantity building materials. You can also easily find a high-quality drawing online. On a special metric grid with a step of no more than 10 centimeters, there is a template for the side parts of the rocking chair. The best option The drawing will be transferred to a large sheet of paper and a pattern will be made, with the help of which it will be convenient to transfer the outline of the product onto plywood.

In this work, small inaccuracies can be allowed. But all sidewalls must be the same. There should be no protruding corners on the lower rolling side of the rocking chair.

Making blanks for a rocking chair from wood

To make special drawstrings and sidewalls, plywood itself will be needed upper class with a thickness of at least 3 centimeters. The side elements should be cut out electric jigsaw according to the made pattern. Three drawers should have a size of 810 by 125 millimeters.

Next, it’s worth cutting blanks from wooden blocks, which in the future will form the surface of the back and seat of the unique chair. Good for this purpose wooden will do timber with dimensions of 50 by 25 millimeters. From it you need to cut 36 blanks of 1250 millimeters each. Before you buy the material you need for the job, you should find out what the standard length of wooden beams is at your nearest hardware store.

Total timber length, which is needed to make the product, can be calculated quite simply on a calculator. It is necessary to maintain a multiplicity so that when cutting workpieces there is a small amount of remaining material. In this case optimal solution there will be a reduction in the size of the rocking chair. For example, if the standard length of a wooden beam is 2.5 meters, then one piece will be 1240 millimeters, because it is necessary to subtract the thickness of the cut and further processing.

With fastening materials everything is much simpler. For the manufacture of wooden chair rocking chairs will be needed:

  • 14 special confirmations measuring 5 by 125 millimeters;
  • 150 wood screws measuring 4 by 50 millimeters.

Thus, preparatory stage can be considered completed. However, a lot of work will still need to be done to make a unique rocking chair. Additionally, you may need the following materials:

  • high-quality drying oil;
  • wood varnish;
  • liquid putty;
  • antiseptic against a wide variety of pests.

Processing the details of the future rocking chair

Next, you can begin sanding the manufactured elements of the chair and removing small chamfers from them. When the grinder has more power and you have experience working with it, then such a process does not take much time. Considering that the furniture will often be located on outdoors, costs pay great attention to the ends of the parts to ensure their protection from moisture, which will constantly affect them.

All ends of the workpieces should be thoroughly soaked in hot drying oil, and the longitudinal fibers of the wood on them should be slightly flattened with a hammer. Thus, moisture will not cause much damage to the rocking chair. This procedure must be carried out several times for the ends of the product.

Assembling a homemade chair

This species country furniture There are no specific assembly standards or rules. Special holes for the drawers should be marked so that it is convenient to assemble the rocking chair. The main elements of a comfortable chair are:

  • headboard;
  • outer arc;
  • sidewalls;
  • foot.

Special drawers They are attached to the sidewalls using euroscrews. To do this work, you need to make high-quality markings on the sidewalls, and then combine the two sidewalls. Next, it is worth drilling in their planes through hole using a wood drill with a diameter of 8 millimeters. To make holes in the end of the frame, you need to use a wood drill with a diameter of 6 millimeters. Now you need to tighten the frame of the product using confirmations.

Next, you need to make holes in the wooden blocks that will form the back and seat of the rocking chair. There should be 35 pieces of blanks. It is necessary to make 4 through holes in each block. In the end it should get 140 identical holes. To simplify this work, it is worth using a special conductor. This is the name of the marking device large number identical products.

It's pretty easy to make. Take a small piece of wooden beam, but not less than 300 millimeters long. It is necessary to drill through holes for the template, the diameter of which must correspond to the size of a construction pencil for marking. At the end and side of such a device you need to nail small pieces of plywood, which will act as a limiter. This will prevent you from making mistakes when marking holes.

Such a jig can be used to mark through holes, but it is strictly forbidden to drill through it, since the drill will break the template holes and the workpieces will have to be marked again. However, you can use a 4 by 35 millimeter wood drill with a countersink. In this case, you can make a through hole in the marked part of the size you need.

Between wooden blocks there must be a space at least 17 millimeters. To avoid distortions, you need to mark on the sides of the product the distance corresponding to 6 bars along with the necessary intervals, and additionally check the matching of the templates in size. When they completely match, you can continue assembling the rocking chair. If the sizes do not match, it is worth making adjustments to the workpieces. A modern wood screw secures Europlywood well. However, if we take into account that the frequency of fastening is very high, then it is necessary to use a wood drill with a diameter of 3 millimeters.

Finishing the rocking chair

It is necessary to carefully fill the holes from the screws. Next, you need to treat the product with a special antiseptic and coat it several times with waterproof varnish. This work should be done very carefully and carefully. After thoroughly drying the rocking chair, you can begin to use it.

How to make a metal rocking chair yourself: drawings

Metal is pretty difficult to process material. When there is no experience in forging or specific equipment for the production of bent products, then only simple rocking chairs will be available for self-assembly. However, their design can be quite interesting. First from metal corner or profile, the frame of the product is assembled.

Next, all workpieces must be treated with an anti-corrosion compound. Hammer paints are very popular now. The finishing decor depends on the preferences of the master. For example, a seat can be made from wooden planks or wrap it up soft cloth. To decorate a rocking chair, you should make small pillows for the back and seat, and on top cover everything with a large removable cover. Sometimes the metal frame is braided with a large amount of willow vine. For this work, you will need theoretical skills in wicker weaving, which are worth learning from numerous videos on the Internet.

A rocking chair can be made of metal, wood, plastic or plywood. However, if you are going to build a rocking chair yourself, then in this case preference should be given to plywood. This is explained by the fact that it will be easiest to draw up a drawing for a rocking chair made of plywood.

Advantages of plywood

  • moisture resistance;
  • durability (a plywood product will not lose its attractiveness even after 10-15 years);
  • environmental friendliness of the material;
  • V special care does not need;
  • easy to saw;
  • low cost;
  • the material bends well.

Blueprints

If you are going to build a rocking chair yourself, then preference should be given to a simple model, which consists of two sidewalls and transverse components.

First, stencils are made from the cordon, which will later be used to cut out parts from plywood (bars, support strips and sidewalls). To do this, you will need a sheet of glued veneer, about 17 mm thick.

Important! Special attention You should pay attention to measuring the sidewalls, since they form the basis of the entire structure (the sidewalls have a curved shape and not a constant width, so calculations may be difficult).

The cardboard template is drawn “by eye”. Standard sizes transverse components 0.7 m in width and 0.6 m in length. However, the size can be changed if desired. Standard length supports 0.07 m.

After the stencil is made, it must be tested, that is, it must be placed on a flat surface and rocked. This is necessary in order to understand what the original will look like.

What will you need for work?

To work you will need:

  • plywood sheets about twenty millimeters thick;
  • iron rims, nails and screws;
  • “sandpaper”, masking tape;
  • electric drill and electric jigsaw;
  • glue, foam rubber, leatherette;
  • paint, stain.

Making the base

Process:

  • Trace a stencil on plywood. Then the part is cut out according to the mark. Thus, the first sidewall is obtained. The second one is made identically to the first one.

Simple model of a chair (cell scale 1:10)

Important! Both sides must be the same size.

  • The cut out element is sanded with sandpaper.
  • The supports are attached to the sides using glue. Then the parts are fixed with self-tapping screws.

Important! The bars must be parallel to each other. In the future, the backrest will be attached to them.

  • Using self-tapping screws, attach the first plank to the upper bars. The remaining strips are installed in the same way.

Finishing

The process of finishing a rocking chair made of plywood:

  1. The outer side of the product can be painted with stain in one or two layers.
  2. The inner parts of the sides and ends can be painted with black paint.
  3. After the paint has dried, the ends are reinforced with iron rims.
  4. To give the chair softness, it is necessary to use leatherette. The leather is first used to trim the back of the back.
  5. Nails are used to attach the leatherette to the frame.
  6. To make the soft part, foam rubber (8 mm thick) is used, which is cut to the size of the backrest. Then it is placed in a leatherette case. Using glue, the mattress is attached to the backrest.

If the drawings were drawn up correctly, the result will be an attractive and comfortable rocking chair. It is worth noting that this is not the only option; there are other more complex models.