Three-tier flower beds made from tires. DIY tire flower bed

(18 ratings, average: 4,17 out of 5)

Guided by the intention of decorating the yard of their private home or transforming their summer cottage, many owners are trying to find inexpensive, or better yet free, design options. In fact, there are quite a lot of such possibilities, and in skillful economic hands, any area can be turned into a cozy and beautiful corner where you can enjoy all the delights that nature and man-made design give.

One of the most significant elements in the design of your acres are, of course, flower beds. Flower beds have become widespread from old car tires. This product does not require large expenses. The maximum investment is the cost of delivery of tires and the cost of paint; everything else depends only on imagination and the ability to think outside the box.

Transform your yard or plot into beautiful flower garden, where each flower is gracefully emphasized and brightly highlighted, or to an amazing garden, where each tree is decorated in an individual style, perhaps if you learn how to make flower beds from tires with your own hands.

Tire advantage

Old tires fully justify their popularity. You can find them anywhere, you don’t need to pay for them, and in capable hands ready product will have a stunning sophisticated look. No less important is the durability of the rubber; such a flowerbed can serve for several years; over time, it will only be needed tint and clear away debris.

Separately, we can note the fact that the more worn a tire is, the easier it is to cut, bend and turn it inside out. Thanks to this, work on creating a flower bed will proceed faster and easier.

Products made from tires are not subject to destruction and deformation due to temperature changes. Neither the summer heat nor severe frosts will be scary for a flower bed made of wheels.

Tire flowerbeds perform an important function - they protect the plants growing inside them. Tire coloring bright hues will help protect plants from overheating in extreme heat. By the way, flowerbeds of their tires have been used in city courtyards for a very long time. It is thanks to them that it becomes possible to grow seedlings in unfavorable urban conditions.

Making a flowerbed

Flower beds made from tires are used not only for planting small trees or bushes, but tires are also quite often used to create flower beds. Conventionally, such flower beds are made from automobile rubber can be divided into two types:

  1. Flower beds made from solid tires
  2. Flowerbeds made of cut rubber

One-piece

This option does not require much work. You just need to wash the tire, clean it of dirt and other debris, and then install it in the right place. Having created a drainage gravel layer, soil is poured into the wheel and flowers are planted. Laying the first layer with gravel - mandatory procedure For . If this is not done, then there is an increased risk of rotting of the plant roots from excess moisture, which will concentrate in the tire.

The installation of such flower beds in the country or in courtyards is usually carried out in one plane or in several tiers. In the latter case, wheels are selected with different diameters and heights, which allows you to play with the design. You can install high flower beds on the bottom and low ones on top, or use special stands for them. The coloring of the tires is selected individually in accordance with the plans and ideas of the owner of the site.

Split

Here you can give complete freedom to your imagination and thoughts. Among this type of flower beds you can find many absolutely incredible design solutions decorating a yard or cottage. Tires with cut edges shaped like teeth or geometric shapes- these are the simplest options.

It will be much more difficult to make a flower garden in the shape of a parrot or a beautiful rooster with the appropriate coloring. However, if you wish, you can build this from tires with your own hands.

Flower garden-pyramid

You can often meet craftsmen who build entire pyramids of their tires at their dacha. It’s very easy to make one, but you will need to find car tires of different diameters. After installing the pyramid and filling it with soil, flowers are planted along these very protruding edges of the tires. Starting from 2-3 tires from the ground, you can plant hanging plants in the remaining tires, which will gracefully hang down, beautifully complementing the overall picture. The coloring of such a flowerbed can be any, but taking into account that the plants will hang and weave, special significance The coloring of the lower tires can be omitted.

Decoration

Old car tires are not very aesthetically pleasing. Gray and tattered tire and beautiful flower- not the best best combination. Therefore, special attention is paid to the coloring of tires.

Before as, start coloring the flower bed, you should decide on overall design and color scheme. The appearance of the flower bed will become more vibrant when using several shades that combine with each other. Instead of the usual monotonous coloring, you can add drawings, which can give the flower garden more individuality.

For coloring car tires will fit the following types colors:

  • Nitropaint
  • Enamel
  • Oily
  • Automotive

Before painting car tires, it is recommended to clean and prime the wheel. For the primer, you can use the composition GF-021, this will reduce paint consumption. Painting should be done only after the primer has completely dried. To increase the service life of the painted surface, you can add some PVA glue. An old car tire should be painted on all sides to prevent black spots from appearing.

How to turn a tire out

Some designs may require turning it inside out. This technique is usually used to create a flower bed that resembles a flower in shape.

Turning out an old car tire is not a difficult task, but to successfully implement the plan you will need not just a tire, but a wheel assembly with car disk. You need to make the necessary cuts in the shape of triangles directly on the disk, after which you bend the petal by petal into reverse side. Finally, you need to turn the rubber the other way around using a disc.

Fence made from old car tires

Often this solution is used in summer cottages, where very important role economy plays a role. However appearance such a fence will look much more beautiful against the background of a corrugated sheet or others building materials, standing out among them for its originality.

A fence made from car tires can be successfully combined with flower beds, which will give it more individuality. The main advantages of this solution will be durability, low cost, availability and ease of installation.

One of the most simple options is to install a fence made from old tires buried half in the ground. The outside of the tires can be whitewashed or painted in bright colors.

To build high fences you will need a lot of tires. After the necessary cleaning and processing, the tires are stacked in a checkerboard pattern to the desired height. Such fences consist of 10 - 12 rows of tires from passenger cars middle class. The inside of the tire cavity is filled with soil into which flowers or other plants can be planted.














There are many ways you can improve the look of your garden, front garden or lawn for free.

For example, from old tires you can make various ones that will decorate the local area.

In this article we will tell and show in the photo:

  • how to make flower beds and flowerpots from tires;
  • how to make flower beds and beds from tires;
  • how to make a basket or flowerpot out of a tire;
  • what other crafts can be made for plants;
  • how to paint wheels.

There are a few basic types flower beds made of tires, which are ubiquitous. To do any of them, need to cook:

Depending on model may need additional:

  • drill;
  • self-tapping screws;
  • rope;
  • or plywood.

For example, to make a flower bed in the form of a chrysanthemum, you will need an old cup or any round container on which you can draw circles for cutting out petals. Step-by-step instruction is shown in the photo below.

The knife must be sharp because the rubber on the tires is very thick. Cutting will not always be convenient, but don’t be discouraged.

Things will go faster if you use it instead of a knife jigsaw. It is possible that nothing will work out the first time, but once you get the hang of it, you will be able to make flower beds from scrap materials not only for yourself, but also for your loved ones.

In order to turn the tire out and give it shape, male strength is required. You can just make a flowerbed, or you can use the cut out part to add volume to the structure. In this case, the cut out circle is placed downwards instead of the leg and you get a beautiful flowerpot made of tires.

A multi-tiered flower bed with flowers selected in both color and height looks attractive.

To make this structure, you will need 14 tires, which must be carefully positioned and filled with nutritious soil. It is difficult to find such a quantity of old tires, so You can use only 7 pieces, after cutting them in half.

In the second case, the tires will perform 2 functions: decorative and as the side of a multi-tiered flower bed. Such a flower garden will not only please the eye, but will also significantly save time during weeding. Even if weeds get in there, removing them will not be difficult.

Nutrient mixture before planting in a flowerbed, you need to especially check thoroughly for weeds.

If a piece of the root of any weed gets into a confined space, it will soon be difficult to get rid of it.

The final stage is painting the sides flower beds. For this purpose it is selected Oil paint the desired color.

Before painting, you need to wash off the dirt from the tires and dry them.

To prevent the formation of small cracks in the paint, it is necessary apply at least three layers. The layers should be thin.

A flower bed will always look impressive white. The remaining colors need to be selected carefully, understanding that color determines the first impression. The sides of the flower bed look harmonious in the same shade as the blooming flowers that will be planted there.

Making a flowerpot

In order to make a flowerpot from tires yourself, it will take a little time and effort. Need to cook following materials and tools:

  • tire;
  • jigsaw;
  • round container;
  • chalk or white marker;
  • brushes;
  • oil paint.

Instructions for making a flowerpot:

  1. Remove the disc cover for a while.
  2. Apply to surface tires chalk outline. If round petals are expected, then you need to draw circles around the perimeter using a cup or round container. If there are teeth, then you need to first cut out one piece from paper or cardboard and, applying it, draw identical shapes around the entire perimeter.
  3. Along the drawn outline cut out the figured bead flowerpot. The resulting circle does not need to be thrown away; it will serve as a leg for the resulting flower bed.
  4. Turn out tire, giving it the desired shape.
  5. Insert the cap into place, giving rigidity to the entire structure.
  6. Place the previously cut circle under the flowerbed, making a flowerpot leg out of it.
  7. Clean the surface from dirt and dust. Dry.
  8. Paint with oil paint.

This flowerpot looks impressive both on the terrace and on the lawn. You can plant flowers in it and ornamental plants different heights: These can be low marigolds and spreading castor beans. In this design, hanging plants look good.

Baskets and flowerpots for pots

Look attractive among the greenery of the garden or on the lawn swans from tires. They can be left as garden decoration, or used as planters for low pots. To make them, you take a tire and draw a contour on it, which you then need to “go through” with a jigsaw or a sharp knife.

For fixing long necks swan is possible use thick wire, which can then be painted over.

In order for the paint to adhere better, you need to degrease the surface of the tire and additionally prime it before painting. For a swan, two types of paint are most often used: white and black.

Beds for growing crops

Old tires can also be useful for growing vegetables in the garden. Their main advantage is that in such beds grass hardly grows.

As you know, weeds significantly interfere cultivated plants develop, and sometimes they are simply drowned out.

To make the beds you will need an electric jigsaw. They cut out the side surfaces of tires.

In such small beds you can plant radishes, greens and others healthy vegetables. Such a bed has undeniable advantages if the site is virgin land where nothing grows.

A few beds and a little land are enough to grow good harvest pumpkins and zucchini. Under such a bed, even the most malicious weeds will not be able to develop and will gradually rot. To speed up the process can be placed under the tire several layers of newspapers, and then fill the bed with soil. To make a long ridge, the tires need to be cut and then fastened together to form a border strip.

The second advantage will be the ability to shelter delicate plants from cold weather. It is enough to secure a thick wire to the tire, on which you can throw a film or spunbond.

High ridges can be built using tires, stacking them on top of each other. Such a bed is very useful for plants, since half of it is filled with various organic waste: branches, weeds.

All this rots, forming compost. Pumpkins grow well in such beds.

What else can you make from tires for plants?

Old tires give room for creativity to those who garden. If you add wheels to the flowerbed, you can bring other original ideas to life and get from them interesting detail V garden landscape - in front of us in the photo is a cart made of tires that is carrying flowers.

From tires different sizes It also makes a beautiful multi-tiered flower bed. And for those who have little space in the garden, you can make a vertical bed from several tires.

The video shows various interesting options designing flower beds from tires:

Conclusion

Useful and beautiful flowerpots, flowerbeds, and flower pots can be built from items that have spent their time. Instead of littering surrounding nature, tires can serve for many years as a decorative detail Location on.

We talked about other ways to get rid of old tires. And their advantage in the garden compared to other materials is obvious: they are lightweight and can be easily moved from one end of the garden to the other.

In contact with

There are few summer residents who are interested only in material interests - a house, outbuildings, a harvest. The majority loves and appreciates the beauty on their land, which does not promise commercial gain. But the number of rich people who can pay for expensive materials and the work of professional gardeners for the sake of a spectacular garden open air, is also not calculated in gigantic numbers. Hence the simple conclusion: you can make excellent summer cottage from essentially waste material, such as old wheel tires, doing all the work with your own hands.

Old tires - new design

Walk through the city courtyards and appreciate their decoration. Car tires have long become an almost mandatory component. modern design. They are dug halfway into the ground, laid out as a lower frame for trees and other vegetation, made into children's paths, hung as swings, and painted in different colors.

Ask your friends - they will not only tell you how to make flowers from tires with your own hands, but also show photos confirming the unconditional truthfulness of these stories.

If the urban environment, significantly limited by public interests and tastes, accepted such design tricks, then for summer residents who have personal space for imagination, as they say, God himself ordered it.

Tire selection

When choosing tires for a future flower garden, you need to take into account not only their size (weight, by the way, too - there are such giants that you can’t budge), but also other features, of which the most important, in terms of facilitating subsequent processing, are the following:

  • winter tires are preferable to summer tires;
  • foreign tires are softer and thinner than domestic ones.

Important! Another important point -the presence of a disk that will perfectly serve as the bottom of a “tire” flower vase. Without this element, we can only talk about tires removed from the wheels and equipped with our own hands.

Plant selection

When we start planning the projects that we will make with our own hands at the dacha, we plan so that we can then not only admire them ourselves, but also show our friends photos of these spectacular structures made from tires, inviting guests over and satisfying our little vanity.
As for plants, the choice is rich:

  • flowers different varieties, including those that replace each other according to flowering dates;
  • small (although this is optional) trees.

Important! General rule one thing: the flowerbed should be beautiful and match the overall style of your site. It is possible that the style itself can be built based on the floral and plant layout.

Making a flowerbed with your own hands: the easiest option

Now the most important thing is to create beautiful (if you decide that one is not enough) from tires with your own hands at the dacha: the result should be such that the photo would not be embarrassing to show to people, acquaintances and strangers.
Processing the selected tire (this was the first step) begins with marking it for subsequent cuts (this will be the second step). There are unassuming landowners who use tires without pre-treatment, but it is still recommended to combine the beauty of living plants with purely technical aesthetics.
The intended cut should be like this:

  • the upper tire part is removed (not completely) and the lower part is left (completely);
  • By showing imagination and ingenuity, the cut line can be made wavy, broken, with teeth, with fringe, etc.
We apply our idea onto the rubber with chalk and move on to the third step.
This will be the cutting process itself:

1. Along the drawn line, the tire is divided into two parts.

Important! If the disc is available, then there is no need to remove the tire from it during the procedure.

2. The lower part is turned inside out - this part of the process is the most labor-intensive, as it requires physical stress. The mechanism is as follows: with a cut, this conventional half of the tire is placed on the ground (or on the surface), its edges are pressed with the feet (and, accordingly, the entire body weight), and then turned out, starting from one place (this is the most difficult) and, gradually accelerating, making full circle.
The result was either a vase (if there was a disk) or a future one.
A thrifty owner will not ignore the top part of the cut tire. He will cut it crosswise from the inside several times (about 10 centimeters) and make another flowerbed, digging the resulting cuts into the soil.

Finally, the fourth step in creating a country flower garden will be the transformation car tire, albeit already quite skillfully processed cutting tool, V beautiful decoration for garden flora.
This final step involves:

  1. Painting (some prefer enamel, some prefer oil paints).
  2. Adding additional decorative elements (glass, pebbles, etc.).

Did you know? In African Kenya, local shoemakers got the hang of making excellent slippers from old tires, the demand for which spread throughout the continent.

Original flower beds made of tires (photo)

To complete the topic, we will admire examples of “wheel-garden” art. You can choose something for yourself from the options listed here. And for a person inclined to artistic and technical creativity, photographs will suggest their own ways of aesthetically designing their summer cottage.






Welcome back to fashion various kinds vintage let's remember the old cute way of framing garden beds circles from wheel tires. Tires that have reached the end of their driving life are easy to get, simply cut and painted with your own hands, and you don’t mind replacing them with new compositions. Take a look at the photo - these are the kind of unusual installations you can make at your dacha, giving your yard a unique charm.

Car tire: a well-forgotten retro

It just seems that a flower bed made from a tire is out-of-date and cumbersome. In fact, if you wish, you can create a real work of art from tires, and with minimal costs, which is relevant at current prices for everything. In addition to the penny cost, such a flower bed has a number of other advantages.


Advice. Choose tires from foreign manufacturers - they are much more flexible in operation.

Having come up with the concept of a future flower bed, place the tire on a hard surface (asphalt, concrete, a piece of hardboard - whatever) and apply chalk to it lateral surface the line along which you will cut out the excess. Cut out the outline with a knife or jigsaw. Degrease with white spirit and paint immediately before dust sticks to the rubber.

It is better to paint first with white paint, then with colored paint: this way the finishing color will be brighter and more even. Using two or three colors, you can create a pattern. When the paint has dried, you can fill the flowerbed with soil and plant the plants.

Tires can be placed directly on the ground, hung on chains or cables, or folded into pyramids. It is better to select plants with a small root system: crocuses, marigolds, begonias.

Attention! Before work, thoroughly clean the tire from dirt, even rinse it under strong water pressure: this will protect the tools from quickly becoming dull.

How to easily unscrew a flowerbed tire

When arranging a flowerbed, the tire can be presented to the viewer not only externally, but also inside. A tire turned inside out makes a flowerpot “a la Peterhof”, and if you paint it like marble, no one will guess its origin.

To make a flowerpot you will need not a tire, but a whole wheel with a disk. Draw a wavy or jagged line on the sidewall of the tire, which will become the outline of the petals, cut it out and start turning it out.

Flowerbed made from an inverted tire

To do this, lay the wheel with the cut side down, step on the disk with your foot and consistently turn the edges of the rubber upward. This is a job for a man, it requires considerable strength and the protection of hands with thread gloves. Watch the video to see how this operation is performed. The result will be a flowerpot on a rounded metal leg.

Advice. If you plan to turn the tire inside out, it is better to take tires with maximum tread wear: they are significantly softer.

Apply paint to it, and not just to outside, but also on the inside, just below the level to which you plan to fill the soil. Since the flowerpot will be raised above the ground, it can be planted hanging plants: petunia, fuchsia, bacopa.

The most original ideas for flowerbeds made of tires

The pliability of rubber and the flight of imagination of a gardener who is not burdened with extra money work wonders. Here are a few examples that are quite original and very simple ideas flower beds made from waste tires.

  • Wall flower bed. The tire is used in a vertical position. To do this, screw it to the wooden wall barn or bathhouse. It will look good with a duet of a lushly flowering ampelous plant (nasturtium, petunia) and a climbing plant (bean), from the shoots of which you can lay a bright green wreath on top of the tire.
  • "Flower Mountain" This large building for those who have a large plot and have accumulated a lot of old tires. There is no need to cut them or turn them inside out: wash them, paint each one in its own color and arrange it into a composition. At the base of the “mountain” rest 6 tires, on them – 5 pieces, above – 3 pieces, the mountain is crowned with one tire, preferably of a smaller size. In each you can plant flowers of a certain type.

Hanging flowerbed

  • Hanging planter "Bird of Paradise". The tire is cut into strips, from which the tail and handle for hanging are subsequently assembled. Beak, eyes and crest are glued rubber glue. The finished bird is brightly painted and varnished, except for the inner part intended for soil and plants. Small flowers are planted in poultry, for example tagetes.

Your own garden is exactly the place where you want to show your imagination and individuality. You can decorate it with anything, any old things that usually accumulate a lot at the dacha. Try making a flower garden from a car tire: time will fly by, and the result will please everyone.

DIY tire flower bed: video

Garden flower beds made from tires: photo




Probably every owner of a dacha or country house at some point there is a desire to improve your site and make it unique.

But a logical question arises: how? After all, goods are sold to everyone, so where can one achieve self-expression? The solution is simple - do it yourself.

The role of flower beds in landscape design

One way to add personality to a site is to install flower beds. Flowers enhance the landscape. And the more original, the more attention she attracts.

One of the ideas for creating a flower garden at the dacha is do-it-yourself flower beds made from tires.

Rubber is malleable enough to be molded into different shapes.

It can be painted or decorated with other materials, creating a real masterpiece. The flowerbeds themselves are made from tires - original idea, and if you use your imagination, you won’t be able to take your eyes off your site.

Tires are often thrown into landfills, causing unnecessary pollution. environment. Be original, find a more worthy use for them.

You don’t even have to buy tires: ask your neighbors, look at home. Someone just has to have a couple of them lying around.

In addition to the fact that DIY tire flowerbeds can be decorative element, you can plant small seedlings in them: strawberries, for example.

Advantages and disadvantages of using tires

The most important advantage of this element country decor is, of course, originality.

But he's not the only one. Tire flowerbeds:

  • easy to manufacture;
  • can be painted in bright and rich colors;
  • will take the form you want;
  • free if you have used tires;
  • attractive.

Among the disadvantages of such flower beds, one can highlight only the fact that not everyone likes them. Some people want something simple and more elegant, while others don’t want to spend time making them.

The original instructions with photos and video materials in the article will help give the flowerbed a complete look.

IN landscape design mountain pine occupies a special place. What varieties of shrubs are used in our latitudes and what does this plant need?

Types of flower beds made from tires

Depending on your desire, you can create different types flower beds

Simple and angry

The simplest, but nevertheless attractive option is a flower bed made of tires in its original form.

Just throw soil inside and plant flowers. You can paint the tire to make it more attractive to look at.

Install several of these flower beds in the order you like on the same level, or build them multi-level design– and your lawn will become much more attractive.

If you like the idea of ​​a multi-level flower bed, take tires of different diameters and place them on top of each other, covering each one with soil.

You can do it original pyramid, on the tiers of which you can plant various flowers, decorate it with pebbles and other details. It looks beautiful, doesn’t take much time – what more could you ask for?

Hanging flower beds

Hanging tire flower beds can be made using a rope or chain attached to a tree. For such a flower bed, you will have to cover the bottom of the tire with a flower pot or other suitable material.

The forms can be very different. For example, using two tires and a piece of pipe you can make a flowerbed-cup, flowerbed-bag, etc. Children will love the lawn, just like in their favorite fairy tales.

Let your imagination run wild

If you want to distinguish yourself even more, tire cutting is just for you. Flowers, swans, dragons and other representatives of flora and fauna.

You will need a shoe knife, a tire and a little imagination.

What do beginners need to know?

You don't need to be a cutting expert to create an amazing and colorful flower bed from wheel tires with your own hands. To do this, you just need to know a few details.

Flowerbeds can be:

  • low;
  • tall;
  • round;
  • curly;
  • single-tier;
  • multi-tiered.

The materials for making a flower bed are:

  • tires;
  • sharp knife;
  • paints;
  • stones, small and large;
  • metal grid;
  • leftover building materials;
  • decorative stones and figurines.

First you need to know that the larger the site, the more massive the structure should be. Multi-tiered flower beds or a large number of small flower beds.

The simplest of the carved flower beds is the shape of a flower. It is easier to cut on soft rubber, especially on imported winter tires. It is thinner, therefore, it is also easier to turn it inside out. Believe me, this is very important.

Before starting work, the tire must be cleaned of dirt and dust, washed and dried thoroughly.

In order not to get lost in the shape of the petals, simply draw them and cut along the contour.

By the way, touch when painting inner side so as not to disturb the aesthetics. Think in advance about how the color of the flowerbed will match the plants inside it. The more complex the shape and brighter the color of the flower bed, the more modest and lower the flowers should be, and vice versa.

Manufacturing step by step

So, how to make a flowerbed from a tire with your own hands:

  1. First you need to choose a tire. It should be made of soft rubber. Be sure to check the availability of the disk so that you can create a full-fledged flower bed. Tires without rims are also suitable: for example, if you want a tall flower bed of several tires, a regular “cylinder”.
  2. Think of the future shape and draw a cut line with chalk. Flower petals, simple circles and jagged edges. You can even cut the tire straight. The main thing is to come up with something that you like.
  3. Cut strictly along the marked line. Do not remove the disc. Once everything is ready, set the top aside, turn the tire over, step on it and pull it up, turning the edges out from under your feet. The most difficult thing is to cope with the first piece, then it will be easier. This is a rather labor-intensive process that requires brute force and patience. It will not be easy for girls to cope with this.
  4. Turn the tire over and bury it in the ground. You will get a beautiful glass. The upper part can be cut inside and attached to the main structure, or you can simply throw it away. The advice to bury the tire is not in vain: if there are children in the house, they can destroy your many hours of work while playing.
  5. Decoration. This is where your imagination can run wild. Paint one color or draw whatever your heart desires. Fence paint is perfect for this purpose. You can attach pebbles, glass or other decorative elements on top of the paint. You can lay out patterns, or you can completely cover the surface of the tire with improvised elements.
  6. For greater effect, if you have small plants growing in your flower garden, decorate visible areas of the earth with pebbles, figurines of gnomes, castles. You can create a fabulous composition from anything that comes to hand.

The video shows how to make a simple flower bed from tires.

You can see what finished flower beds made with your own hands from wheel tires look like in the photo gallery.

As you can see, there is nothing complicated about creating flower beds from tires. This could become fun entertainment for you and your children, a way to express yourself and develop imagination.

And if someone has artistic talent at home, this is the perfect place to use it.

The most time-consuming part of the process is being able to turn the tire out. But if you don’t want to suffer, you can do something simpler. By the way, flower beds are not the only thing for which old car wheels are useful in the country.

Be creative, have fun decorating your site and surprise your neighbors!