Fan for air cooling. Wind the heat on a fan: inexpensive options for the home

When the heat comes, not everyone has enough money or the opportunity to install an air conditioner in their apartment or house.

Moreover, even if you have installed it, as a rule, it only cools one room well. What to do with the rest? Should I buy more and install two or three pieces?

Therefore, most of us begin to look towards a cheaper and more common solution - floor fans. Such devices should be in every apartment, even those who already have a full-fledged split system.

Does the fan cool the air?

Although it’s worth reminding for those who don’t know - fans actually don’t cool the air at all, but simply move it back and forth around the room.

So what causes the cold to be felt? Everything is arranged quite simply. Your body reacts to heat by sweating profusely. Drops of moisture appear on the surface of the skin.

When they evaporate, excess heat is taken away. And an outside breath actually helps speed up this process.

Especially if the air is dry and not humidified by any special devices.

By the way, don’t be surprised, but sometimes it happens that the fan does not cool at all, and even performs the opposite function.

For example, if you place two ice creams on a stick, one of which will melt naturally, and a fan is directed at the other, then, strangely enough, the second one will melt faster.

This is explained by the fact that a layer of cold forms around the sweet delicacy, which in some way inhibits its melting. And when you direct a fan here, this layer is completely blown away. And the ice cream melts more intensely.

What practical conclusion can be drawn from this? Since fans are not sources of cold, it is more difficult to catch a cold from them than from traditional split systems.

Which floor fans should you choose for your apartment or home, and how to avoid the most common mistakes when purchasing so that the device can work for you for a long time and safely?

Fire safety

Let's start with the most important thing - fire and electrical safety. Do not forget that any fan is an electrical device.

One careless move or accidental short circuit, and instead of cooling the apartment, you can burn it down. And not every one of you has special spark-proof devices that can easily prevent such accidents at the initial stage.

If the wiring shorts to the housing from the inside, it may well shock you. Therefore, you should not move the wind blower from place to place while it is on.

Also pay attention to the material of the case. On the one hand, solid metal is b O Greater fire safety, but in terms of electrical safety, plastic looks more advantageous.

It is true that it is desirable that it be non-flammable. Check this in the product passport.

Also, be sure to look in the documentation for an indication that the engine has overheating protection. This could be a miniature thermal relay that breaks the circuit when the temperature of the windings reaches over 145 degrees.

At this point, the impeller stops and the engine will not start again until the temperature drops. Without such protection, this is a real fire hazard.

Expensive or cheap - what's the difference?

If you think that by purchasing the most expensive model you will get the best cooling, then you are deeply mistaken. To do this, it is not at all necessary to choose the fan with the highest price tag.

Often, even inexpensive models They cope with their tasks very well. Let's visually compare the efficiency of three wind blowers in different price categories:

Cheap models are usually the flimsiest and most unstable. Their noise level is maximum speed reaches 70db.

The blowing speed here is 4.9 m/s

The middle version does everything the same, but the only thing added to it is a timer and remote control.

True, its design is more stable, and the material used is of better quality. This affects the weight of the device.

At the same time, the noise level here is still the same 70 dB.

And don’t be surprised, with more expensive models it is quite possible that the air flow will be less powerful than with their inexpensive counterparts.

As for sophisticated models at inflated prices, on the one hand they seem to be heavier and, accordingly, more stable. And silent mode is really the quietest (less than 50dB).

However, at maximum speed, which is most often used in the heat, the results are still the same as those of cheap competitors. The noise reaches 70db.

Their blowing power is only a few tenths higher - 5.6 m/s.

So it turns out that there isn’t much of a fundamental difference in performance between models for 800 rubles and 5,000 rubles.

All the convenience lies only in additional controls and maintenance.

It's up to you to decide whether it's worth paying extra for it.

Foundation stability

Fan stability is the most important factor. If there are children or pets in the family, they can somehow touch the wind blower stand.

And if it falls, many problems can arise. It all depends on where exactly it will fall.

By the way, even a new fan often fails after the first overturn. Read what breaks and how to fix it yourself in a separate article.

There is a huge variety of base designs on which the stand is mounted. But only three are the most common.

The most common type is a cross-shaped base.

Less common is the round stand.

There are also fans of the monoblock type. They don't have any legs at all.

Which of these bases is the most stable? The cross-shaped base, despite its external reliability, is inferior to everyone else.

One good push is enough and such a fan will calmly fall on its side. But the round leg is the most stable option.

Therefore, if you have a choice, then give preference to the round shape.

Performance

Many people still confuse fan power and performance. Although these quantities have little relationship with each other.

Most home models range from 40 to 60W. This parameter indicates how much electricity your unit consumes per hour. And this only indirectly affects productivity.

The larger the motor, the longer and wider its blades. Their maximum diameter in domestic floor types reaches 40cm.

Fan performance directly refers to the volume of air moved per unit of time. How to determine what performance you need?

To do this, calculate the volume of the room being blown, that is, multiply its area by the height of the ceilings.

After this, substitute the exchange coefficient into the formula. Its meanings are as follows:

for residential premises – 3

for kitchen and bathroom with toilet – 15

The formula for calculating the required fan performance is L=S*H*k

S-area

H-ceiling height

k-factor

That is, if your bedroom is 18m2 with a ceiling of 3m, then it will require a fan with minimum performance - 18m2*3m*3=162m3/h

For example, models with a power of 20W can easily blow air into rooms with a volume of up to 200 cubic meters.

Unfortunately, most manufacturers do not list performance parameters in their documentation. How to choose a wind blower without knowing its size?

Focus on those units that have a higher number of speeds. For small rooms kitchen or bedroom, just two airflow modes will be enough.

And for huge rooms of more than 20 m2, you will need three or all five. The higher the speed, the more air the unit will move in the same unit of time.

The size and number of blades also influence performance. The most common models are:

What's the difference between them? The larger and wider they are, the further they throw the air flow. Therefore, wide impellers, with the same engine power, should be given preference.

What about the quantity? Of course, for fans of the same power and impeller width, those with a larger number of blades will be more productive.

However, they will still lose out to their wider counterparts. Therefore, when choosing, first of all, focus not on quantity, but on width.

An ideal fan model should operate with a noise level of up to 30 dB. It's like a whisper or a steady ticking wall clock. True, this is achieved at the very minimum speed.

So that you understand, for comparison, the refrigerator during operation has a sound within the range of 38-42 dB.

As you know, extraneous noise tends to layer on top of each other. Noise of all work household appliances in an apartment it can reach up to 90db. And this is similar to a passing train a hundred meters from your house.

This volume is very harmful to the health of young children. Until the age of 2, they cannot distinguish what is extraneous noise and what is the necessary sounds for learning.

Therefore, over time, such children become irritable and nervous. And your constantly on fan will only contribute to this.

In order to protect the health of children and your nerves, it is very important to have a quietly operating fan. And here again, models with wide plastic blades and a minimum number of them win. Your children will only thank you for choosing such a fan.

They have the lowest performance when actually measured with special instruments.

Protective grille

Today this accessory is a mandatory attribute of any floor fan with moving blades. However, even if it exists, this does not mean good protection.

Little curious children love to stick their fingers anywhere while exploring the world around them. And it can be not only sockets.

Therefore, if we are talking about the complete safety of fans, then your choice should be towards those types that are equipped with grilles with the narrowest and smallest cells.

Right in the store, try to see if your little finger can fit through the bars to make sure your purchase is safe in advance.

Because even models with plastic impellers can break the delicate fingers of small children.

Not so long ago, fans appeared without external blades at all. The so-called Dyson fan.

How does it work and inflate the air? At the base of the device there is a turbine that takes in ambient air and accelerates it.

As a result, it flies out in a certain direction from the slots around the circumference of the frame.

Such devices combine simultaneously:

It would seem that this is the most ideal fan. No external rotating parts, many functions, plus compactness and beautiful appearance.

However, everything is spoiled by the price of the issue. On high-performance models it reaches such a level that it is much more profitable to purchase an air conditioner.

Well, in the end, let's look at a few exotic and unusual options fans. For example, the most expensive and gigantic wind turbine built by engineers in Florida.

It is used to check how a building can withstand hurricane winds. It consists of 12 turbines with a power of 700 hp. each.

Such a giant can create an artificial air flow at speeds of up to 250 km/h! The famous Hurricane Katrina had the same power.

There are also completely portable and original options– a baseball cap with a propeller on solar panels.

Or a pocket fan powered by USB and also battery operated.

However, there is no benefit from such gadgets. It's more of a toy accessory for entertainment.

Unless models connected via USB can be conveniently plugged into a laptop and get at least some coolness directly at your workplace.

Errors in selection

To summarize all of the above, we summarize the most common mistakes, which should be avoided when going to the store for a fan.

Many residents apartment buildings faced the problem of cooling their home in the hot summer. As a rule, residents who can afford it install expensive air conditioners that effectively cool the apartment. However, there are others no less effective ways cooling rooms using available fans. In this article we will take a closer look at how you can cool your apartment and your room using a fan without significant costs and create a favorable microclimate in your house or apartment during the hot season.

Method 1

There are several most effective methods that allow you to quickly reduce the room temperature to a more comfortable one.

We need a basin with cold water, a floor fan, a plastic bottle with frozen water and a piece of gauze.

Take gauze and thoroughly wet it in cold water. After this, you need to throw moistened gauze over the fan. To do this, lower any of the 4 ends of the gauze into a bowl of cold water, which will stand next to the fan. After that, turn on the fan and room air together with the circulation it will begin to cool the room. To achieve maximum effect You should put a plastic bottle with ice or very cold water in the basin. Depending on the fan diameter and installation height, you will need to select the gauze size.

Method 2

We offer you one more effective method, which will help answer the question - how to cool yourself and a room without air conditioning? For this we need a floor fan and a large container for water. It is best to use cool water, and the larger the container for it, the faster the room will cool. We install the fan in the required position and place a container of water in front of it. During intense airflow warm air room, the water will begin to evaporate. And thus the temperature in the room will drop by 2-5 degrees.

Method 3

Using a floor fan, you can effectively cool rooms in the evening or at night. To do this, you need to turn the fan in the direction of the window. This will allow hot air to escape from the rooms. In other rooms, all windows will need to be opened completely. In this case, a draft occurs when the influx fresh air from the street will push hot air out with the help of a fan. Thanks to this, the indoor temperature will be equal to the cooler outdoor temperature.

Method 4

For this we need a floor fan and empty plastic bottles by 1.5-2 liters. Pour cool water into plastic bottles and freeze. After that, we place bottles of frozen water in each room. We install a floor fan in the living room, which will cool the room more efficiently. When the water has melted, you should put it back in freezer plastic bottles and repeat the procedure again.

Tip 1

To keep your rooms cool and fresh, you should perform wet cleaning all premises. As a rule, it is best to perform wet cleaning with cold water in the early morning, when the rooms have not yet warmed up.

Tip 2

Curtains in rooms can be wetted with clean, cool water. This equally effective method allows you to reduce the temperature in the premises. To do this, you need to use a regular sprayer or spray the curtains in another way. cold water. In extreme heat, it is best to repeat the procedure as often as possible.

Tip 3

Cover the windows with reflective film. In sunny rooms it is necessary to stick it on all windows. reflective films, which will protect the premises from direct sun rays. Thus, the temperature in the rooms will be long time remain favorable.

We also recommend:

Axial fans are what are popularly called “daisies”. The motor drives the blades, which are fixed to an axis and hidden under a mesh for safety purposes. The more powerful the motor, the longer and wider the blades themselves, and the higher the fan’s performance - the volume of air it can move in an hour.

The design of a radial fan is a pipe or cylinder with many blades that drive air in a circle (radius) inside the cylinder, and it is pushed outward under the influence of centrifugal force. If an axial fan simply moves air, then a radial fan creates pressure and directed flow. Radial fans are usually column type, and the column can be either tall or very small - there are also portable fans with handles.

Column type fan

Tabletop or floor-standing?

Floor fans with a leg have more options in terms of blowing direction: as a rule, they rotate the “daisy” with blades to the right and left, and the user can adjust its inclination and the height of the leg. Table and floor axial fans often do not know how to turn, especially designer models in a retro style, when a ring with blades is enclosed between decorative pillar supports. Table fans sometimes have mounts for wall mounting. Judging by the reviews, this often comes as a surprise to buyers: it blows great, but only in one direction. Column fans, as a rule, are able to rotate the housing in different directions.

Retro Table Fans

Or maybe ceiling?

Ceiling axial fans are more likely associated with government premises - dining rooms, foyers in a holiday home somewhere in Kislovodsk. But in principle, they belong to household fans and can easily be installed in any room in the house. The advantage of a ceiling fan is the uniformity of airflow and the absence of danger that as a result of its operation you will be blown out. U ceiling fans longer blades and powerful engines, they are more productive, and, by the way, not cheap. Ceiling fan manufacturers claim that they are a true alternative to air conditioning, but with no refrigerant, no filters to replace, and use much less electricity. Let me doubt it: air conditioners cool the air, but they can also work to heat the air; an air conditioner can lower the air temperature by 10, 15 and even 20 degrees, and fans create the feeling of a lower temperature.

Ceiling fan with lamp

Innovation of the last decade: bladeless fans

The “pioneer” here was the Dyson company, which made a turbine built into the body, which pumps air from the room and releases it outside through an oval frame, multiplying its speed. The main advantage is that a child or animal will not reach the blades. These fans are also easier to care for - dust does not stick to the grilles and blades. But the pleasure is very expensive.

On Russian market others bladeless fans not yet, but they are made in the world, you can buy such a craft (or a fake) much cheaper, but no one will give a guarantee of quality.

Bladeless fan Dyson AM02 Tower Fa

Power and performance

Table fans have a low power - 20–30 W, floor fans - 40–100 W. In addition, the maximum power consumption may vary depending on the availability additional functions(heating, humidification).

When buying a fan, performance indicators (so many liters of air per hour) will not tell you anything: it is difficult to imagine these liters of air. Therefore, it is better to look at the area of the room for which the device is designed.

Floor axial fan

Noise level

The noise level is important for comfort. For comparison: the noise level of a refrigerator with the compressor on is 38–42 dBa, and you will hardly hear 38–39, 41–42 can interfere with sleep. The maximum noise level of 45–50 dBa is not terrible; if the fan has low operating speeds, it will make less noise at them. Ideally, you need to listen, otherwise, when installing it in the bedroom, you may be in for an unpleasant surprise.

Control

At the most simple models mechanical control and two or three operating speeds. For the more advanced, it is electronic, often touch. It is convenient when the fan has a remote control, which can be used to enable or disable the housing rotation function, select the speed and direction of the blowing.

Electronically controlled fan with remote control

As a rule, such models also have a display that displays all operating parameters and sometimes the room temperature. The most modern models allow you not only to regulate the speed of operation, but also to program the operation of the device in different time days or days of the week, use a timer. There are fans with remote control via a smartphone application. If you buy a model with electronic control, then look for an auto-shut-off function or a shutdown timer: this is useful; people often forget to turn off the fan.

Fan with possibility remote control REDMOND SkyFan 5005S

overheat protection

It makes sense to read the user manual for the model you like, fortunately, now you can find almost anything on the Internet. There will definitely be information about whether the motor is protected from overheating: after all, in hot weather the fan works almost around the clock, and it is important that the motor can be switched off (so that the electrical circuit opens at temperatures above a critical level). Otherwise, the motor may simply burn out.

Additional functions

The most common “bun” is operation in fan heater mode. If you need a “2-in-1” device, then it makes sense to buy a fan heater that can operate without heating, in the mode of a regular fan.

Some models can humidify the air - in fact, they are connected to blades ultrasonic humidifiers: water “fog” is generated by ultrasonic vibrations, then rises through a hose to a block with blades and spreads throughout the room using a fan. The downside is that they require the use of softened water, otherwise water will form on surfaces and furniture over time. white coating from salts contained in tiny drops of water blown by a fan.

Buying a fan in the summer is an important and quite troublesome matter. However, if you know what criteria you should pay attention to and which models it is better to stay away from, the choice will not take so much time and will be justified.

By what criteria do we choose?

Performance The (power) of the fan should be the main determining factor when choosing it. How larger area premises, the correspondingly higher the power of the device should be. However, this option requires special attention only when purchasing a floor or wall version, whereas in a table fan the size of the blades will be more decisive.
Noise level will affect the degree of comfort of using the device, especially at night. This parameter should not be higher than 40 dB; it must be specified in technical specifications fan And for a children's room or bedroom it is advisable to prefer even 30 dB.
Fan motor can be based on ball bearings or bushings; the first option is more productive and creates less noise.
Additional functions devices such as backlight, timer, display and even an ionizer, of course, are not so necessary, but quite comfortable. Naturally, the price will be an order of magnitude higher.

Which fans should you not buy?

Any company specializing in the production household appliances, also produces fans, so with such a wide range it’s easy to get confused. Let's try to determine the so-called negative rating - which devices you should definitely not pay attention to:

Excessively light fans are undesirable due to their instability when operating at high power. Although for the wall version this factor is not important.
You should be wary of fans from unknown or little-known Chinese brands sold at ultra-low prices. If you still need the maximum cheap option, it is important to make sure that a particular instance is working correctly, that there is no extraneous noise, and that the package is carefully checked. Such fans are usually supplied several times in one box and confusion of parts (for example, strips for the base) is almost inevitable.

A classic budget floor fan in a plastic case without unnecessary functional frills, but at the same time quiet and durable. Appearance is quite standard for of this type devices, working mechanism - axial, power consumption - 45 W.

The fan control is simple mechanical. But since this option is considered the most reliable, this is not such a disadvantage. Supports 3 operating modes (speeds) and night lighting. Additional adjustments - stepwise adjustment of the tilt angle 0-30°, fixing the body or working with a 90° rotation, adjustable height with a maximum value of 1.25 m.

Three plastic blades are responsible for creating the air flow, which are covered with an easy-to-install/remove protective mesh with a diameter of 40 cm. Scarlett SC-1176 is available in black or white.

Simple reliable design;
Affordable price;
There is protection against overheating.

Cheap plastic;
At first there is a smell.

A good standard floor fan. Despite its low cost, it blows well, and the most interesting thing is that it is really quiet. Easy and simple to assemble. One season has already been “plowed” almost around the clock.

Available "wind blower" with mechanical control, whose main characteristics differ little from those of similar devices from other manufacturers, but which nevertheless has earned the trust of most owners for its reliable and efficient operation.

The three-blade design with a diameter of 40 cm in combination with a 45-watt motor ensures efficient air circulation in the room, while maintaining low level noise load. This means that the operation of the device is convenient not only during the day, but also at night in order to maintain comfortable conditions for a restful sleep.

The functional set is quite familiar:

3 speed options;
Height adjustable up to 1.25 m;
Work in a fixed position or with automatic rotation of the body by 90°.

The model is available in white and black.

Easy assembly;
Reliable control;
Good price.

Somewhat flimsy design;
Short power cord.

A good simple budget fan. This, in fact, was what was needed. With minimal purchase costs, it is completely worth it. In the summer it is used for wear and tear, but so far it has not caused any malfunctions. What else do you need?

Best Floor Fans with Remote Control and Timer

The best electronically controlled floor fan in the budget category. Almost silent, 3 speeds allow you to choose the most optimal power. Using a timer, you can control the operating time, after which the fan automatically turns off. The device is equipped with a 90˚ rotation function, but the vertical deviation is not particularly large and is set manually. Some disadvantages include the short power cord, which, in principle, does not affect performance.

I’ve been using it for more than 3-4 years, everything is fine, it works in the summer, lives on the balcony in the winter (over time, only the plastic has yellowed a little). The fan itself is well balanced - it does not rattle during operation. Powerful, saves you from the heat.

One of the best fans for home among the most inexpensive. Nothing superfluous: the device is equipped with a control panel, rotating mechanism and timer up to 8 hours. 3 speed modes, which can be changed either remotely or using buttons on the body. Possible vertical adjustment from 1 to 1.25 m. It has a nice design and optimal cost.

simple assembly;
attractive price;
set of all basic functions.

unstable;
noisy;
There is some extraneous noise when turning.

Just right for the season - the best option fan! It works fine, it makes a little noise, but it also has a timer and switches modes using the control panel. The price is low, and the quality is comparable to more expensive fans.

Axial floor fan with average power of 45 W. Easily controlled using the remote control, buttons and display. The operating time is programmed using a timer up to 8 hours. 3 speed modes. The blue backlit display shows the room temperature. The fan is additionally equipped with a radio without radio station memory. There is a special groove on the body for the control panel. Possibility of rotating the housing by 90°.

Beautiful design;
backlit screen;
shows air temperature;
equipped with a radio;
attractive price.

noticeable noise during operation.

At this price the best fan for home. There is a remote control, a display, even a radio. The head stops turning if you press the button (usually pins on all models). I would like more modes, of course, but what we buy for is what we get.

Best All Metal Floor Fans

A solid and solid fan, the product of a fruitful collaboration between the Stadler Form team and designer Matti Walker. The stylish appearance of the device bears a certain resemblance to the outline of an aircraft turbine. And if the powerful air flow created by three aluminum blades only enhances this impression, then a completely comfortable background noise (up to 56 dB) is definitely not associated with the hum of an aircraft.

The fan is designed to serve rooms up to 50 m²; the housing can be rotated and tilted. Power consumption, depending on the selected mode, ranges from 36 to 58 W. The device is made entirely of metal (stainless steel, zinc, aluminum) and has matte finish. Decent weight – 9.4 kg – in combination with massive round stand provides maximum stability.

3 speed modes;
Stylish and reliable metal design;
Easy cleaning of the blades.

High price tag;
No remote control.

The fan looks very attractive. Nice interior You need a decent device, which is what this model fully represents. Excellent performance, reliable performance, stability. Satisfied. I don't regret the money spent.

Axial floor fan with unusual design at a power of 40 W it processes up to 2700 m3/hour. Made of of stainless steel, the device has nothing superfluous, it just performs its function well. There is a mechanical speed adjustment. The fan takes up little space, weighs just over 3 kg and does not require assembly. Stable, perfect for home or office.

high power;
unusual design;
quiet;
compact;
does not require assembly.

high price;
small angle of inclination;
heats up during operation.

Amazing design, after I saw it, others are not interesting at all! At first speed it works almost silently and blows very well.

10 Best Fans for Home

The best fans for the home - floor and table - according to experts and customer reviews.

Until recently, regulation of microclimate parameters was associated only with air conditioning equipment. But as the requirements for changing individual parameters of the air environment grew, specialized devices began to appear on the climate systems market. Such devices include air coolers, which purposefully lower the temperature and, if necessary, can also perform the functions of ionization and humidification.

Operating principle of coolers

Exist different types humidifiers, but they all work by spraying water. A small reservoir is installed in the device body, which serves as a kind of cooling source. In front of it in the same housing there is a fan unit. During operation, the mobile air cooler generates currents that fill the room, changing its characteristics. The fundamental difference between coolers is the ability to humidify the air, while mobile air conditioners dry it.

A mesh filter is used to spray small particles of water - a fan passes air currents through it. For this reason, air coolers must be filled with water regularly. It is poured into a special tank working fluid. In some cases, automatic filling is carried out if the system is connected to a central water supply.

Types of devices

The main difference between cooler models is functionality. As already noted, such devices not only change the temperature regime, but are also responsible for humidification. Actually, based on these criteria, two main types of equipment can be distinguished - these are coolers themselves, as well as evaporators. The work of standard coolers is to lower the temperature and saturate it with moisture. At the same time, evaporators are also capable of providing an air cleaning effect. But the temperature reduction function of such models is ineffective. Devices also differ in type of design. The traditional air cooler is a floor-mounted one, which allows the housing to be moved and quickly installed anywhere without connecting to utility networks. But there are also wall-mounted and even suspended structures, which save space and often turn out to be more efficient in operation.

Reviews of the model BPAM-09Н from Ballu

Model included middle segment coolers, but is highly valued by users. It is noted that the device shows good performance even when operated with sunny side under the window. According to the owners, only 10 minutes are required to bring the temperature to the optimal state. But for full operation of this model, the pipe will need to be brought outside - hot air will be discharged through it. As for negative reviews, the BPAM-09N air cooler for home is significantly limited in settings. You can only regulate the speed of rotation of the fan blades, and other parameters are set according to a single standard. This model is also criticized for its noisy operation, not enough effective system air filtration (from dirt and odors), lack of timer option and remote control. That is, in terms of basic performance qualities, the solution is worthy, but the functionality and individual operational nuances spoil the overall picture.

Reviews of the model AC TIM 09H P4 from Timberk

This option will do, if you need both a cooler and insulation. Users testify that the device effectively cools the room, makes little noise and can act as a dehumidifier. Pleasant moments also include the original stylistic execution of the design and well-implemented controls - at least in comparison with the previous analogue from Ballu. The kit includes a remote control and a standard list of equipment settings for various parameters. But during operation, this air cooler can also disappoint. Reviews indicate the lack of ability to select the temperature, which is big drawback during the first time of use. In the future, such settings can be made intuitively, knowing the potential of the cooler.

Reviews of the AM400 model from Bimatek

It should be noted right away that this cooler is a record holder in terms of low noise. It works very quietly, causing virtually no acoustic discomfort. For comparison, its lower noise threshold is 38 dB, while the average parameter of other models is 50 dB. But this is not the only attractive feature of the air cooler from Bimatek. Operating practice shows that it quickly cools rooms and does not require special effort during installation and can be easily configured using different parameters and modes. Weaknesses This one doesn't have much, but it has them too. For example, a short pipe of the device is noted and big sizes housings.

How to choose the optimal air cooler?

Mobile cooling systems are very diverse in their capabilities. Therefore, you should initially determine what specific tasks will need to be performed - lowering the temperature, humidifying, air purification, ionization or drying. As already noted, some models are capable of increasing the temperature level, which allows the device to be used in winter time. Next, the design and its parameters are determined. The most popular solution is a floor-standing air cooler, which can be moved around the apartment without difficulty. If you need complete freedom of movement, then you should choose models without an external pipe and corrugation - it should be a device with closed system accumulation of air masses. Then specific operational parameters are selected, a set of options and other nuances are determined - from design subtleties to power.

Conclusion

The very need for a cooler for a home occurs in cases where it is not possible to install a standard air conditioner. Such situations are also possible in country houses, and in apartments, and even more so in dachas. But will it be the best way out out of position? In terms of the totality of operational qualities, indeed, in addition to full-fledged split systems, only an air cooler can regulate the microclimate as effectively. Price floor model with standard parameters the average is 8-10 thousand rubles. As you can see, even compared to an air conditioner, this is a very attractive option. Of course, such devices may lose in performance, but this will depend on the power specific model and operating mode. Theoretically, a cooler can become an even more effective assistant in regulating the air environment, as it provides, in addition to temperature regulation, humidification and ionization functions with cleaning, filtration and drying. This list is not always found in one model, so the functionality is calculated in advance in the optimal configuration.