Windmill made of plastic. How to make mole repellers with your own hands from plastic bottles and other materials

Plastic bottles are gradually becoming a popular material used for various crafts. They make all sorts of animals out of it. With help simple bottles You can grow an entire palm plantation in your garden. They build houses from them, make furniture, and this is just a small list of possibilities. A It’s not difficult at all, especially when you see such beautiful crafts that people make with their own hands.

Before starting work, it is necessary to accumulate available materials. Buy plastic bottles with some liquid in the store or ask friends to help collect required amount. Then decide what you want to get. Will these be wind turbines from plastic bottles, which will help you determine the strength and or you want to hang colorful lanterns that will rotate, adding character to your garden. There are many different options and ways. Let's try to describe them, and you can decide for yourself what suits you best.

Maybe you want to know from a plastic bottle for small child so that he can play with it with pleasure. Especially if he also takes part in the work as much as possible. Let's start from the very beginning simple option. Take a bottle and cut off the bottom. Then we carefully cut the entire body of the bottle into small strips, going close to the neck. To get a bright pinwheel, you can use paints or colored tape. Will also work insulation tape different colors or simply colored paper. We glue it onto plastic and get a multi-colored striped blank. To make the spinner spin better, slightly rotate the plastic strips by 45 degrees. Then we straighten everything out as much as possible to get a disk. We attach the cork to a pre-prepared rod or wooden stick. If this is a toy for a child, then it is better to make a small gap between the lid and the shaft so that nothing prevents the blades from spinning.

Now, knowing how to make a pinwheel from a bottle for kids, let's move on to the next options. If you need to install a moving bird repeller in your garden, then you don’t need to look for improvised material. The easiest way is to cut several rectangular plates on the body of the bottle without cutting off completely. Then bend them at an angle of 90 degrees and secure the bottle to the pole. To make more noise, you can attach plastic covers with threads to the workpiece.

The second way to make a pinwheel from a plastic bottle involves using several blanks. We take the largest bottle. We attach separate parts from the rest of the workpieces to it using threads or wire. Here we use only the bottoms and necks; the middle of the bottles is not needed in this version. On each tier we attach three parts, turning them empty in one direction. For example, you have three necks at the bottom with lids that point to the left. And on top you secured three bottoms, which are directed in the other direction. This is necessary so that your spinner can spin from the wind from any direction. If desired, add lids for additional noise. Then we fix the entire structure on a pole.

Now you already know several ways to make a pinwheel from a plastic bottle. Let's move on to complex ones, but more beautiful options. To decorate the garden, it is better to make rotating lanterns. A little more effort, but the result is more impressive. Glue transverse strips onto the bottle different color. The brighter they are, the cuter your pinwheel will be. Then we mark vertical stripes from the bottom to the neck on the flat surface of the bottle. Using a sharp knife, cut through the plastic. Lightly squeeze the bottle to bend the strips in the middle. For better torsion at the neck and bottom, we make more folds in different sides. Now we drill a hole in the lid and stretch a rope through it to use it to hang the pinwheel lantern.

If you start doing all this, then other ideas will come to you as you work. You can use bottle halves or cut special grooves in them. If there are no large containers, then two bottles are joined to each other and it turns out required size. Try it. Involve children. And you will succeed.

With the onset of summer, the owners summer cottages, gardeners approach the beds with hope, berry bushes, fruit trees, assessing the future harvest. The children eagerly await when grandma's first berry ripens. When the side of a strawberry or cherry is almost glowing, the bird deftly picks up the berry, eating the prey as it goes.

It will not be possible to take back what was stolen. You need to think about protection from pests in advance, before the onset of the berry season. To prevent this tasty treat from flying away with the starlings and thrushes, you need to know how to make a bird repeller from plastic bottles with your own hands.

The device is universal, inexpensive, humane. Let the advice help those who grew the crop to enjoy the berries. And the birds will remain alive. After harvesting, they will again fly to the gardens to feed on harmful insects.

From childhood we are taught that birds are protectors of gardens. They destroy harmful bark beetles, leaf-eating caterpillars, aphids and other insects that harm vegetable crops, fruits, and trees. However, for some reason no one remembers that useful birds turn out to be dangerous pests, destroying the grown crop if a bird repeller made from a plastic bottle is not installed in the garden.

And this is not the only harmful act committed by birds:

  • Nimble gray sparrows quickly notice when fresh lawns are seeded. They immediately appear on the plot as a friendly family and quickly peck the seeds.
  • Flocks of birds trampling on the grass damage young, immature lawns.
  • Enjoy the seeds vegetable crops love jackdaws. They dig up freshly dug beds and look for prey.
  • Crows, starlings, and pigeons are not at all afraid of human proximity. Given the opportunity, they are not averse to flying onto the balcony, into a gazebo in the country, stealing something edible or crap on the table or other garden furniture.
  • Sometimes birds like to land on film greenhouses to rest. Flying up, they tear the film with their claws.

Making a bird repeller from a plastic bottle with your own hands

For many years, homemade scarecrows have been used in gardens to scare away birds, shiny disks have been hung, and magnetic film from cassettes has been stretched.

Modern “Kulibins” have figured out how to make a bird repeller from a plastic bottle.

The simplest and good example was demonstrated by the hosts of the program “While everyone is at home.” Timur Kizyakov and his engineer friend Andrei Bakhmetyev in a matter of minutes made a device that conquered the world and saved crops. Their experience is worthy of study.

Sequence of actions step by step

Before you learn how to make a bird repeller from a bottle, you need to prepare materials and tools.

To work you will need:

  • plastic bottle;
  • pieces of foil;
  • scotch;
  • knife-cutter;
  • small washer;
  • glue or liquid nails;
  • felt-tip pen;
  • a piece of thick wire;
  • stick holder.

We begin to assemble a bird repeller with our own hands from plastic bottles according to the instructions:

  1. Drill a hole in the lid and bottom, placing them opposite each other. The diameter must be such that the prepared wire or electrode can pass freely.
  2. Make markings for future blades with a felt-tip pen. Divide the surface vertically into four parts, draw straight lines. Add two horizontal lines to each vertical line to make four “C” letters.
  3. Make slits along the marked stripes with a knife. The result is 4 blade doors that open outward.
  4. Glue a washer onto the wire at a distance of 1 cm from the end.
  5. Place the wire into the bottle, guiding it into the hole made in the bottom. The washer holds the bottle, spins, and does not fall down.
  6. Screw the lid on, passing the second end of the wire into the hole.
  7. To frighten birds, you can glue pieces of shiny foil to the blades.
  8. If the length of the wire is at least 1 m, then the repeller can be mounted on it. If you don’t have a long steel wire at home, it is recommended to attach ready product to the stick.

It's time to take the device out into the garden and test it in practice. Even a small breeze will spin it, which means the task is completed.

You may be interested in this product:

Conclusion

A do-it-yourself bird repeller made from plastic liter or one and a half liter bottles is the simplest means of helping to preserve the harvest and drive away uninvited guests from the site.

It is installed for times when protection is required. In autumn, rooks, sparrows, tits and pigeons will return to the gardens, sing songs, and destroy real pests.

Windmills in the garden, made from plastic bottles, decorate almost every plot. This modern representative of architecture looks pretty good. Especially in this weather when there is a slight breeze. Slowly swaying windmills relax your attention. There is nothing difficult in making such toys. Available source material (plastic bottle), scissors, a little desire - that's what you need to create a plastic windmill. Surprisingly, this fun brings more than just visual interest. Summer residents have learned to make windmills that scare away all kinds of birds and, importantly, moles. How to make a windmill from a plastic bottle? This and other questions should be answered below.

What is a wind turbine?

Maybe someone doesn't know this. But a windmill is a kind of structure that can convert wind energy into mechanical energy. Plastic turntables are beautiful accessories.

They are not capable of such feats, but their rotation can turn into relaxation energy. After all, sometimes it’s so nice just to look at a beautiful windmill. Its rotating blades soothe and relax. Therefore, every summer cottage is simply obliged to acquire such a windmill.

Varieties of "turntables"

There are many ways to make a windmill. Large, small, oblong, short - all types cannot even be listed at once. Who cares? Yes, in general, none. The only difference is the type of shape. The operating principle and manufacturing are almost the same. So, the first windmill made from a plastic bottle. You can make a small pinwheel with your own hands.

It will consist of the bottom of the bottle. The second windmill will resemble the sun: large flat blades, bright colors. The third decoration is especially for gardeners. The remedy against moles and all kinds of birds is simply irreplaceable. Windmill-fighter - this is how you can call a windmill capable of driving away unwanted living creatures.

Step-by-step instructions: windmill made from plastic bottles

There is a difficult task ahead. Not that the process of making a turntable would be that difficult. No, but no one has yet canceled painstakingness and accuracy.

Step-by-step instruction depends on the type of windmill, its size, shape, so each “propeller” will be slightly different both externally and during its manufacture.

Windmill from a plastic bottle - you can make something beautiful with your own hands

There is not even a drop of doubt that the above accessory decorates any area. Gray vegetable gardens take on completely new colors. The view is immediately transformed, naturally, into better side. So first, a little theory. It starts with selecting a plastic bottle. For this type you will need a container with a flat bottom. It is the bottom that will become the basis of the windmill.

The practice begins by cutting the bottle in half. The part where the neck is located can be thrown away. She's not needed. Carefully trim the remaining cut so that it is even. The most painstaking part is cutting the blades. The cylinder should be cut lengthwise. This way you will get something like a circle with rays. The distance between the blades should not exceed one and a half centimeters, but they should not be placed too close either. The “rays” themselves should be about a centimeter wide. So, the small preparation is almost ready. There's just a little bit left to do. The blades must be bent at an angle of forty-five degrees. Thus, they will look not inward, but to the side, positioned behind each other. The blades are ready.

Final version

This is how the windmill made from a plastic bottle is almost finished. It’s not difficult to make something good with your own hands, right? But something is missing in this design. Souls. “Naked” plastic does not attract attention at all and does not decorate the garden. On the contrary, it evokes feelings of emptiness. What to do? We need to get down to design. Yes, only originality can turn a plastic windmill into a beautiful accessory. It's probably worth starting with painting the blades.

Bright colors, sparkles, beads - all this will give the windmill freshness. You can draw patterns, straight and curved lines on the blades so that when they rotate, some kind of silhouette will be formed. Also, don't forget about the foundation. A simple stick? Too boring. A magic staff, a small tree, a liana - you can come up with anything you want. The main thing is to move away from the template.

Wind turbine rocket

“Turntables” can be located anywhere, and the playground is no exception to the rule. Children love everything festive and unusual, so “gray” windmills will not attract attention. What design and shape should you come up with for children? Everyone in early years wanted to become an astronaut. It's interesting and funny. The thing that attracts the most attention in this topic is rockets. Here's the idea. Pinwheel rocket. Yes, the idea is not bad. Here's how to make such a windmill out of plastic. Because it's much nicer to see on the site. After all, the soul is invested in them. The wind turbine-rocket will be located non-standardly: horizontally. For production you will need one plastic bottle. The blades will be located at the rear. How? The bottom of the bottle is presented unusual shape. Namely four petals. If you use ingenuity, you can cut out small rounded blades from them. The nose should be ceremoniously painted in a bright color. There you go. All that remains is to put the rocket on the axis, and it is ready to rotate and conquer space.

Country prototype

What else can a windmill made from a plastic bottle be? You can make a pest repeller with your own hands. More precisely, summer residents have long learned to make a windmill from plastic anti-mole bottles. The design is simple: blades are cut out on the sides and the bottle is placed on a metal pin. This is what makes the sound that scares away the moles.

You will need:
-2 plastic bottles
-4 plastic bottle caps
-3 large wooden beads
-Pliers or wire cutters
-Scissors
-Metal wire
-Painting knife
Making a windmill from plastic bottles with your own hands
1. Cut the bottle into 2 parts with a painting knife
2. Cut the bottle in half with scissors and start cutting the “blades” of the windmill
3. Start bending the petals at an angle of about 45 degrees. You can bend the petal “blades” not only at the base of the bottle, but also in the middle.
4. After this, carefully, trying not to damage the windmill blades, smooth them out.
5. Make a hole in the middle of the wings and lid
6. Paint the blanks (bottle caps and cut out blades) of the windmill. Best for this paint will do from a can. Then you can paint the bottle in several colors
8. Glue gun glue bottle caps to the bottom of the prepared blades
9. If necessary, enlarge the hole in the bead with a drill
10. Bend the tip of the wire and place it on the bead.
11. Put a windmill blank, a bead, and another blank and a bead on it
12. Bend the tip of the wire and cut off the excess part with wire cutters
13. Attach to the metal pin with a clamp.

Why do you even need a windmill on your site? Naturally, this is not a mechanical wind generator, which allows you to convert wind energy into mechanical energy.

Our goal is to create a beautiful “accessory” for decorating a summer cottage, the main task of which is to transform wind energy into “spiritual” energy.

If you want to make a pool out of a tire summer cottage, see step-by-step manufacturing instructions.

Materials

In material terms, the process of creating a windmill is not very expensive.

To assemble a windmill we need:

  • support - wire;
  • 2 plastic bottles with a flat bottom;
  • 4 caps;
  • 3 large beads;
  • available tools: stationery or painting knife, hammer, awl, wire, glue, paint;
  • perseverance and attention;
Read how to make a tire pond on your property.

Manufacturing instructions

The assembly process is not difficult at all. So let's get started.

Cut the bottle into two parts with a knife

Depending on the size of the windmill you want to build, the displacement of the bottles that will be needed during the manufacturing process will depend. Our mill will be small sizes, for this we take two plastic bottles with a flat bottom, 2 liters each.

We take a stationery or painting knife and cut the bottles. The closer to the neck you cut, the larger the blades of your future mill will be. But don’t get carried away, because if you cut too close (almost close), the blades will turn out useless.

So, you should be left with parts of the flat bottom bottles. We don't need other parts.

The remaining parts should be cylindrical. We begin to cut strips in a circle with scissors, but do not cut to the base. When choosing the width of the strip, you need to decide how many blades you want the windmill to have.
We do the same with the two remaining parts of the bottles.

After we cut them, we bend each strip at the base at an angle of 45 degrees. The end result should be something like the sun with rays.

It is best to paint the blades from a spray can, so you can make them multi-colored

Afterwards we proceed to finishing works. The wing blanks and caps can be painted either with a spray can or with paint; in any case, it will take time for everything to dry before continuing work.

Glue the cap to the middle of the wings on each side.

We put the bead on the wire

And now the final part of the work. For this we need four corks, two cap blanks and three beads.

The sequence of actions is as follows: we insert a wire through the bead (be sure to check whether the wire passes freely), then bend the tip of the wire so that the bead cannot fly off.