What do you need to know when ordering glass partitions and doors? Professional advice. Measurements of glass structures A necessary tool for installing a glass partition at home
Glass structures are used everywhere today: partitions in offices, showers, railings for stairs and balconies, and much more. They are comfortable, practical, very durable, and also fit perfectly into any interior. But making a high-quality product from tempered glass is not so easy: you must not only use high-quality, properly tempered material for this purpose, but also take all the measurements correctly. And after the structure is ready, carry out installation. These procedures require a lot of knowledge and high qualifications, so taking measurements and installing glass structures should only be done by experienced professionals.
Why are measurements needed and in what cases are they taken twice?
Before starting any work, you need to carefully note all openings, ceiling heights, etc. Usually this happens in one stage: the master comes and in one day finds out all the dimensions he needs. But in some cases the process is divided into several stages. This happens in the following cases:
- If the fastenings for the glass partition are built into the walls. In such a situation, the specialist takes measurements twice: before finishing. After the first taking of measurements, the master decides which profiles need to be used for this design.
- If sliding systems are installed, their elements are attached directly to the ceiling, therefore preliminary measurements are necessary to find out whether the ceiling will bear such loads.
- If the sliding door extends into the wall. In order to save space, some designers do glass sliding doors moving as if inside the wall. In this case, measurements are also taken before the boxes into which the partition will slide are installed. Everything here must be measured very accurately, otherwise the partition simply will not budge.
For measurements you need many tools: a laser tape measure, a laser level, a plane builder and much more. And, of course, great care and skill are needed. Therefore, it is better not to try to take measurements yourself, but to invite a specialist.
How to install glass partitions
The method of installing a glass partition directly depends on whether it is stationary or sliding. Let's look at the stationary option - it is quite simple to understand.
- Using a plumb line, markings are made for the future partition.
- Next, the profile is mounted. A layer of rubber is placed under the tires secured with dowels - this will be more reliable and there will be better sound insulation. This
- Then the angles are attached to the top of the tires. They are located approximately every half meter. There are clamps on top of the squares - they will fit tightly to the glass so that it does not “walk” in the profiles.
- After this, a sheet of glass is installed - first in the lower mounts, and then in the upper ones. The clamps are tightened and you're done. The main thing is to insert the canvas very evenly and neatly, without any distortions.
With sliding partitions, everything is much more complicated: there are connectors, carriages, limiters and much more. But even if in theory this idea seems simple to you, it is better to turn to a specialist: when performing the work, he will take into account nuances that you might not know exist. In addition, they have sufficient experience and knowledge, because City Glass hires only masters of their craft. Therefore, if you decide to order glass partitions from our company, services for measuring glass partitions, you will definitely not regret it.
Name | ||||||||||||
![]() |
||||||||||||
Product SKU | 00985 | |||||||||||
Brand | City Glass | |||||||||||
Price |
![]() |
![]() Measuring office partitions |
Who measures the openings?
The measurement of openings in the StekloMet company is carried out by a design engineer who is responsible for the correctness of measurements and develops design documentation to your project.
The design engineer will tell you about the features and advise which fittings are best to use in your case, what you can save on, and where it is better to install the highest quality, albeit more expensive, components.
To measure openings, we use modern measuring tools: laser tape measure, laser level and, if necessary, squares and templates.
The design engineer can bring to the site samples of fittings for future construction.
When to call a surveyor?
![]() |
For the final measurement of openings, a glass structure measurer should be called when your opening already has a “finish finish”: the finishing material lies on the floor flooring, the walls are plastered and painted, tiles or porcelain tiles are laid in the bathroom. |
|
![]() |
Sometimes a design engineer’s visit to the site is necessary even before the “finishing” of the openings. A StekloMet company specialist will issue technical specifications to builders for preparing openings for installation, tell you what material and in what location the embedded elements should be provided, and advise on the specifics of installation work. |
Measurement result
Based on the results of measurements, a Technical task of the Customer, which is an integral part of the Contract. This document displays all your wishes, the state of the opening at the time of measurement and what the result of the work performed should be. A sketch of the future structure, diagrams and junction nodes are drawn in detail.
Cost of measurement
*subject to filling out an application on the website
** the cost of measurement is deducted from the contract price
The cost of measurements outside the Moscow Ring Road is determined by the distance from the Moscow Ring Road.
An important and crucial stage in the work of any glass workshop is measurement. The selection of the optimal offer for fittings and constructive solution, as well as further production of glass products. Every millimeter is important for glass production.
Why is measurement necessary for every project?
It is during the measurement that the engineer makes a decision about the possibility of installing glass structures, collects information about the materials of the openings, possible communications in the walls and the ability of the opening to withstand the planned load. The measurement must be carried out by a specialist with high level technical education. The calculation of the cost of components and materials, preparation of the project and technical specifications for glass processing depend on the accuracy of the work performed.
When is measurement carried out in several stages?
- Measurements are taken when the finishing of the openings is fully or partially ready. It depends on the planned type of construction. If it is necessary for the profiles of a future shower or interior partition to be “recessed” into the walls, then before the finishes are ready, our employee arrives for consultation and further organization installation of profiles. And then the final measurement is carried out.
- Also, 2 or more visits by a technician to take measurements are carried out in cases where it is planned to install sliding and telescopic systems. They are mounted in the ceiling. Therefore, before executing suspended ceilings an embedded part is designed, manufactured and installed, ensuring further safety and functionality sliding system. The weight of the entire sliding door (glass doors and fittings) “falls on the shoulders” of the embedded part or architectural ceiling. Therefore, it is very important that they are reliably and efficiently made.
- There are also nuances when designing doors whose movement is planned inside the walls. In these cases, technical specialists visit the site before and after the construction of partitions into which doors are planned to be rolled back in the future.
What tool is used for measurement?
- Laser roulette
- Laser level
- Plane Builder
- Electronic protractor
- Telescopic ruler
Measurement cost:
Our company provides free measurements for all objects located within the Moscow Ring Road.
Outside the Moscow Ring Road, the cost of measurement depending on the distance in km:
From 1 to 5 km - 1500 rub.
From 6 to 10 km - 2000 rub.
From 11 to 30 km - 3000 rub.
From 31 to 50 km - 4000 rubles.
From 51 to 70 km - 5000 rub.
From 71 to 100 km - 6000 rubles.
Important:
- Payment for the measurement is made by the customer on the day the measurement is taken. The cost of a measurement visit is deducted from the total amount for all orders over RUB 70,000. upon conclusion of the contract.
- Repeated visits to Moscow initiated by the buyer are paid. The cost is 1500 rubles. for 1 trip within the Moscow Ring Road.
- Measurements are carried out strictly at the time agreed with the customer. Our engineers additionally warn each client about their visit an hour before arriving at the site.
- The technical specialist, at the customer’s prior request, brings to the site all the necessary glass samples, decorative film, fittings, profiles, as well as catalogs and price lists. On site, the master will be able to offer possible variations of the future design, talk about the types of glass, fittings and their differences.
- The duration of the measurement is determined by the total volume of the planned order, the quantity and complexity of future structures. As a rule, measurement does not take much time.
- You can take the measurement yourself. In this case, the glass company is not responsible for the correctness of the measurements taken. Glass is manufactured to the dimensions you provide, maintaining the required tolerances and clearances.
The use of glass partitions in a living space is simple, but at the same time effective way organization of space. IN Lately such designs are becoming increasingly popular. Before installation, you should study their features, main advantages and possible disadvantages.
Glass partitions - modern design solution
Purpose and application features
Glass partitions for zoning a room do not take up much space and at the same time visually expand the space. Thanks to special glass processing technologies, it becomes safe and reliable in use. Triplex or tempered glass is usually used. It is first processed by high temperature in a special oven. As for triplex, it is a laminated type, which consists of several layers glued together using a special resin.
The designs have the following advantages:
- Long service life and reliability. Tempered glass and triplex are characterized by good mechanical stability and can easily withstand daily household loads, humidity, changes temperature regime, in addition, can be a good basis for hanging equipment.
- Safety. Even if deformed, the product will not cause significant harm to others.
- Wide range of operating possibilities. This makes it possible to use partitions in living spaces, as well as in the kitchen, bathrooms, and balconies, where conditions are more aggressive.
- Light weight.
- Attractive appearance, the ability to emphasize the laconicism and individual style of the room.
- Functionality. Due to the good transmission of light, the use of a glass surface helps to obtain excellent lighting in the rooms in the apartment, making them more spacious. The advantage is that at the same time the zoning necessary for the owners occurs.
It is worth noting some disadvantages of this material:
- High price.
- Complex installation - you can’t do it yourself without hiring professionals.
Before ordering the product, you need to take correct measurements, since after production the glass for the partition cannot be cut.
Eat various ways securing partitions. They can be not only stationary, but also suspended and sliding. For the installation of sliding doors, special rails are used, and for hanging ones, top profiles and carriages are used.
![](https://i0.wp.com/mezhdveri.ru/wp-content/uploads/2018/08/2-1-400x274.jpg)
Any design idea can be realized as an artistic idea. Glass can be frosted, transparent, or tinted. Using architectural film, the desired image, logos, ornaments, and inscriptions can be easily applied to it.
Types of glass partitions
For convenience, a classification of partitions according to different characteristics has been introduced.
By purpose
Partitions can be mobile or stationary.
- Stationary.
They replace ordinary fixed walls. This a good option, when it is necessary to zone a part of the room in which there are no windows, a sufficient amount of light will flow through the glass. This kind of solution is often found in office premises, where the partition only marks the boundary, without creating the feeling of an enclosed space with small rooms. Moreover, each employee has a strictly assigned work area- a kind of personal account.
A good solution for a living space is a partition in the bathroom - when it separates the bathroom from the rest of the space. This approach helps to achieve additional waterproofing without dividing the space, so even small room maintains a feeling of sufficient area and lack of boundaries.
- Mobile.
Such partitions are most often a design solution that helps to use the same area in different ways. Transparent walls are easy to move - this is a real solution for apartments with small square footage. Mobile partitions are often used in studio apartments.
![](https://i0.wp.com/mezhdveri.ru/wp-content/uploads/2018/08/3-1-400x300.jpg)
This technique also allows you to combine the kitchen and living room. To ensure the safety of the room with a gas stove, it must be fenced off. The glass fence is there and protects the space, but is not felt and visually creates the feeling of a spacious room.
Mobile partitions come in several types:
- sliding - the moving part rolls behind the stationary part;
- radius - design with sliding door, but with partitions of a curved radius;
- with swing/hinged doors - more often used for shops;
- folding - according to the principle of an accordion or book.
By type of design
Based on the type of construction, partitions are conventionally classified into the following types:
- All glass. They are assembled from huge sheets without additional connections. Additionally, fasteners and fixing elements are required. Such glass should have good load bearing capacity, therefore, triplex is usually used, which will not crumble when destroyed.
- Frame. An aluminum profile is attached to the walls, ceiling and floor; it can also be made of wood, plastic or steel. The glass sheet is securely fixed in it. It is the frame that bears a significant load.
- French glazing. This is a type of frame, when the glass in it is divided by imposts. The advantage of this type is that if one or more parts are damaged, it will require less time and cost to repair.
- From blocks, double-glazed windows. With this method, the partition looks more like a wall. The blocks are similar to bricks and are thicker than other types. They are also distinguished by improved sound insulation, but less transparency.
![](https://i2.wp.com/mezhdveri.ru/wp-content/uploads/2018/08/4-1-400x295.jpg)
By the number of glasses used
Based on this feature, two types can be distinguished - with one or two glasses. When using two Special attention applies for installation. At poor quality installation Dust will accumulate between the glasses, to remove which you will have to partially disassemble the structure.
Base material
Compared with window glass interior partitions made from thicker sheets - from 8 mm thick. Their optical properties and strength have also been improved. The products are easily suitable for use in kindergartens, schools, and clinics.
To increase strength, triplex glass or a special reinforcing film is additionally used.
TO glass products also include partitions made of organic materials:
- Plexiglas/acrylic - polymer material, which is usually used to implement unusual projects.
- Cellular polycarbonate is safe, lightweight material, does not beat.
- Polycarbonate is a polymer with high strength characteristics.
Manufacturing of glass partitions
Modern partitions are made using the latest equipment only by specially trained workers. For partitions the following can be used:
- triplex;
- glass with a pattern or design;
- frosted glass;
- colored or tinted glass.
Partition from tempered glass creates beautiful and safe design. After hardening, the sheet can withstand enormous mechanical loads. Even if broken, it does not shatter into fragments, that is, it will not cause harm to those who may be nearby. Hardening is carried out at a temperature of about 680 degrees in special devices. After processing, the material can be safely used not only in offices, shops, but also in residential premises.
To create a frame structure, they are usually used aluminum profiles. They meet all standards. High-quality fittings guarantee the perfect appearance of the product and long time operation.
In the process of creating a triplex, inscriptions and drawings can be applied between the layers. Stained glass paints or aerosols are used to produce colored glass. High Quality. Due to the gluing of layers during the manufacturing process, triplex does not crumble into fragments when damaged.
When making laminated glass, the layers are first joined, then they are passed through rollers and processed in a thermal chamber to remove air and strengthen the triplex. Assembly is carried out under a pressure of about 12 bar and a temperature of 100 - 150 degrees Celsius.
If during installation it is possible to achieve a high density of fasteners, then the material will show excellent soundproofing qualities.
![](https://i0.wp.com/mezhdveri.ru/wp-content/uploads/2018/08/5-400x403.jpg)
Installation of a glass structure is possible not only at the construction stage, but also in the finished interior. The main thing is that all work is performed by professionals.
Conclusion
So, partitions made of glass have many advantages and can be successfully used in residential premises, zoning the space without making it visually smaller. A wide variety of types of material makes it possible to choose the most suitable option for the conditions and design, making the apartment more modern and practical.
In contact with
Comments
Unfortunately, there are no comments or reviews yet, but you can leave your...
New articles
New comments
S.A.Grade
SvetlanaGrade
SergeyGrade
SergeyGrade
Alexei