How to make a wooden box with your own hands. Create a unique box from plywood with your own hands Make a decorative box from planks

When the phrase “wooden box” is mentioned, many people immediately imagine a standard fruit box. Although in fact boxes can be very different and used for all sorts of purposes. This is a very useful product that can be used in everyday life, not only somewhere in the country, but also just in the house. Let's figure out how to make a wooden box with your own hands, because only homemade thing can be not only unique and most convenient, but also completely safe.

general information

A box is a type of container or an interior item, which is a product that has a cubic or parallelepiped shape. It can be made from various materials, including plastic, cardboard, metal, but is mainly made according to tradition from wood or its derivatives. Depending on the design, the box can have solid walls and bottom or slatted surfaces, and it can also have a lid and be either simple or decorative.

On a note! The category of boxes includes drawers, complementing the furniture and making it more functional and convenient to use. Such boxes usually do not have a top lid, but their bottom is equipped with special wheels that ride on small rails fixed inside the cabinet or cabinet in the place where the box itself should be located. This makes it easier to use.

The history of the box itself is unknown. From time immemorial, people have used various containers for storing all kinds of household items, transporting and packaging goods, etc. Historians believe that, most likely, the first boxes appeared during the period when trade relations began to develop and were invented precisely with the aim of simplifying the transportation of goods and products , saving it in proper quality before reaching the point of sale.

Nowadays, a wooden box is still used for transporting and storing goods, but at the same time it is also used in everyday life, and even in gardening. It is actively used for harvesting and growing seedlings. By the way, at one time standards even appeared for boxes for potatoes, storage of apples, etc.

At the same time, the boxes settled firmly in the house. They can be used not only as furniture elements, but also as individual products. For example, there are drawers for storing tools, small parts, sewing accessories, etc.

Serious competitors to a regular wooden box are products and containers made of veneer, plastic, and cardboard. But none of them can fully replace simple, but reliable and high-quality boxes, and therefore they continue to be actively produced and made with their own hands.

Properties of a wooden box

Why, despite the emergence of cheaper and simpler competitors, does an ordinary wooden box not lose its popularity? It's simple - the answer to this question lies in unique properties and the features of such containers.

Table. Comparison of box characteristics.

Drawer type	Advantages and disadvantages
Veneer	Such a box is made from planks that have virtually no processing. It is quite fragile compared to wood, but costs less. Suitable for storing and transporting fruits and vegetables, as well as other products. Afraid of moisture.
Made of plastic	A fairly convenient type of box that is not at all afraid of moisture. Depending on the quality of the plastic, it can be either very durable or quite fragile. But this type of box is still easier to damage than a regular wooden one. It doesn't cost much, but it's more expensive wooden product. Suitable for storing and transporting not only dry, but also wet products.
Made of metal	A species that is quite rare. Metal boxes have not become popular due to their tendency to rust, as well as their heaviness and high price. It is not easy to make a metal box at home without special equipment.
Made of wood	The most optimal type of box. It is quite durable, can have different designs, and is suitable for storing all kinds of products. Looks much better than a regular veneer box. Using decorative finishing can be used at home, durable if the wood has been treated protective compounds.

On a note! Ordinary wooden boxes of simple design are actively used when decorating loft-style rooms. They are an excellent attribute of this design solution.

The production of wooden boxes in production takes place according to GOST 20767-75. And for them, a wooden board of a certain quality, 1 cm thick, is used. Such boxes are thin-walled, but durable. They are quite light and easy to use.

Prices for construction boards

Construction boards

Boxes in the house

As a rule, boxes for transporting and storing products are not well processed - they are hardly sanded and, of course, are not varnished. But for use at home, it is recommended to treat them and cover them not only with protective compounds, but also with paints and varnishes. Then the box will look beautiful, and the person using it will not risk getting a splinter in his finger.

Typically, the house rarely uses boxes made directly for transporting cargo or storing the same fruit. More often than not, those who need a simple but nice box have to contact carpentry workshops and order a specific product from them according to their size and wishes. So don’t confuse industrial and carpentry boxes.

Boxes in the house, as already mentioned, can be used for various purposes. This includes storing utensils in the kitchen, storing small items in the living room, storing toys, clothes, shoes, cosmetics, household chemicals etc. The main thing is that this type of container fits organically into the interior and does not cause confusion.

The easiest way, of course, is to get hold of boxes in a store or warehouse, sand them and varnish them to use at home. But you can make such a container yourself, fortunately it’s not at all difficult task, be it a box for decorating a room, storing things or growing seedlings.

Prices for different types of wooden boxes

Wooden box

Why exactly a tree?

Wood is the very material that is most often used to create products for the home. The reasons why this happens are simple. First of all, it is important to say that wood is environmentally friendly pure material, not hazardous to human health. He doesn't exude unpleasant odor and does not release any toxic substances into the air, so you don’t have to worry about allergies or health problems.

Wood is also one of those materials that you can easily work with at home. No need to use complex specialized equipment, it is enough to have a sawing tool, a drill and a screwdriver or screwdriver on hand. Also, grinding and other processing of the material may require a minimum of cost and effort.

The tree is durable and beautiful and, varnished, is able to retain its appearance for many years. Only material that is not coated with anything can darken over time and lose its former natural beauty. Fresh wood looks very nice.

It is not surprising that the tree was and remains one of the most popular types materials. Although now in almost any specialized store you can buy its derivatives - plywood, panels, furniture board etc. But none of these options will be better than regular natural fresh board in any case.

Prices for furniture panels

Furniture board

Making boxes: what do you need?

So, to make absolutely any wooden box (regardless of the purpose of its use), you will need a number of tools and materials. The list is small, but without these things the matter will not move forward. You will need:

• sawing tool for cutting wooden board and bars onto planks of the required length. This could be a jigsaw or a wood saw;
• grinding device wooden surfaces – Sander, sandpaper with a special bar, etc.;
• hammer (in case nails will be used);
• screws, nails, possibly metal corners;
• screwdriver (if self-tapping screws will be used as fasteners);
• varnish and brush or paint - to cover the surface of the wood or give it a certain color;

On a note! Before applying paint, it is best to pre-prime the wood. This will reduce the amount of paint used and also provide it with a more saturated color.

• pencil, square, ruler, tape measure - tools that will help make the necessary markings.

Important! Before you start creating a box, you must draw its diagram or download a ready-made one from the Internet. This will allow you to make a smooth and neat product that has the necessary parameters.

Prices for popular models of screwdrivers

Screwdrivers

Making a plant box

Step 1. The first step is to decide on the dimensions of the box being constructed. It is important to choose the place where it will stand. Based on this, you should sketch out a drawing of the box indicating the dimensional parameters and calculate how much material is required.

Step 3. Now you need to apply the appropriate markings to the board - mark the side and end sides box. It is better to take measurements with a tape measure, but to get even marks it is better to use a square.

Step 5. The boards on the sides of the box need to be connected together using self-tapping screws. You can also use nails, but connections with self-tapping screws are much stronger and of better quality.

Step 7 At the bottom of the plant box, it is important to drill a few drainage holes. They will ensure the drainage of excess water that will enter the soil during irrigation or rain.

Step 8 It is important to sand all surfaces of the box so that they are smooth, pleasant to the touch and safe.

Step 9 Finally, the box can be painted, but it is better to coat it with varnish. This will make the box beautiful and additionally protect it from moisture.

Video - Making a simple box

Slat box

Step 1. The first step is to cut the blanks to create the box. You will need bars of the selected length, slats 1 cm thick. The bars need to be cut to length so that their profile is triangular.

Step 2. Next, you need to take the bars, lay them on top of each other (2 bars on each side) and start making walls. You need to apply wood glue to the flat surface of the block and lay out the slats so that they rest on the flat surface. lateral surface bars. The slats are placed at a certain distance from each other to create gaps.

Advice! If you plan to make several boxes of the same size, then it is convenient to use a wooden template to create the walls.

Step 3. Then the slats additionally need to be secured to the corner bars using nails or self-tapping screws. In this way, two side walls of the box are made.

Step 4. Next, the prepared walls need to be placed in a special template (or simply held correctly) and, using the same principle as in steps 2 and 3, attach the next slats to the sides of the free sides of the bars. Thus, it will be possible to create two other side walls.

Step 5. Then the bottom is made. You need to lay two slats (with a length equal to the length of the box) parallel to each other, and fix other slats on them, but without gaps, so that the bottom is solid.

Step 6. All that remains is to secure the bottom to the underside of the box, and it is ready. If necessary, all structural parts can be sanded before assembling the box. It is better to varnish or paint the product after assembly.

Video – Box on spikes

Video - Making a tool box

The box was and remains a simple but indispensable item for storing all kinds of things. It is especially necessary at the dacha or in a private house, as well as for those people who love everything simple and uncomplicated. In any case, a product made by yourself will be as reliable as possible and will last for more than one year, or even more than one decade. Moreover, as it turned out, making a wooden box is simple - it is only important to understand what shape you want to get the product.

A box is a necessary thing in everyday life. There is no point in buying or ordering it, because it is much easier to make something with your own hands from boards. The main thing is to follow the technology step by step, choose the right boards and know how to make a box. Then everything will work out.

Choosing a board and making parts

The size of the boards largely depends on the size of the intended product. There is a common belief that low-quality boards are suitable for a box. Is it so? If the surface of the wood is uneven, with knots and deformations, then a person may be injured when sawing or processing the board. In order to create such a structure, there is no point in taking high-quality expensive wood. It is best to choose a board that is medium in size and quality. How to make the simplest box where you can put your tools?

To make such a design you will need:

• boards;
• self-tapping screws;
• sanding paper;
• carpenter's pencil;
• ruler or triangle;
• jigsaw or a circular saw.

22 mm wide boards are best suited for this. Self-tapping screws will be required for fastening, and for working off boards and surfaces finished product- sanding paper. It all starts with markings, which require a carpenter's pencil and an ordinary ruler. It is best to take a triangle ruler, because with its help it is more convenient to mark the boards from which the box will be made.

Practically not used for cutting wood hand tools. To make the box, you will need a circular saw or jigsaw. Be sure to pay attention to the teeth of the power saw. They should be small and even. Such structures for domestic needs are not made of thick wood. A powerful saw, which is usually used for cutting down trees and landscaping work, is not needed here. There is one more nuance: when starting to saw off boards, they first make a test cut on the wood to see how it will be sawed, and only then begin the main operations. In order not to make a mistake with the sizes finished design, for this purpose, it is best to prepare a “pattern” in advance: make its bottom and walls from paper. This is very convenient, because then you just need to attach the “pattern” to the wood and transfer the necessary parameters to the boards.

Once everything is cut out wooden parts, they are sanded. Then 3 holes are drilled at the bottom of the side walls of the finished product. The lower ends are coated with wood glue. To remove excess it, you will need a dry cloth. The components of the box are assembled and pressed tightly together. IN drilled holes tighten the screws. Before finally screwing in the screws, it is necessary to check the correct location of all parts of the finished product. To make the tool box convenient to use, a handle made of a cylindrical rod is attached to the top of it. The rod can be made of wood or metal. How to make similar designs for flowers? Repeat the same operations from the beginning. And use self-tapping screws to secure the handles on the sides to make the flower box more convenient to use.

Manufacturing of a retractable structure

It is believed that a retractable structure is more difficult to manufacture than an ordinary one. This is true. Calculations and measurements when making such boxes require more complex ones. Before you start making a retractable structure, you need to decide where it will be located. If you need drawers for a cabinet, it is better to first make one for any other piece of furniture in order to understand the principle of operation and master the manufacturing technology in practice. To begin with, it makes sense to try to restore old cabinet, making drawers for it. First, the doors are removed from it and unscrewed door hinges. The first thing to measure is the “working depth”. This term refers to the inner surface of the sidewall, that is, the distance over which the boxes move. Each of them has outer part, which is usually called a facade. The bedside table also has a facade. Based on this, all drawer fronts are calculated. The height of the cabinet facade is divided by their number. From the resulting figure, subtract the distance of the gaps multiplied by their number.

The selection and calculation of guides is the most critical stage of the work. For a retractable structure, it is best to select full rollout guides. When you already have experience in manufacturing retractable bedside tables, it makes sense to switch to roller guides, the installation of which is much more complicated. There is no point in skimping on drawer slides. The better quality they are, the more functional and reliable the piece of furniture will be. Marking the guides is not as difficult as it seems at first glance, the main thing is to show maximum care. The calculation of guides starts from the top. The upper pair of guides will not differ on the right and left sides. Marking is carried out at height, equal to half height of the upper façade. All the following markings are made in accordance with the dimensions of the drawer and the front of the bedside table. Once the markings are completed, they proceed to the manufacture and assembly of the products themselves.

Securing the guide elements

Drawers are best made from solid wood or fiberboard. Each drawer requires a furniture handle. Assembling fiberboard boxes is almost no different from assembling wooden ones, but it has its own nuances. Before installing the boxes, their edges are glued. For this operation at home you do not need complex equipment. Using an iron and a dry cloth, apply the edge to the desired end and gently heat it with the iron. To trim excess edges, you will need an ordinary kitchen knife. It should not be sharp so that the laminate that makes up the edge is not damaged. If the box is made of solid wood, this operation is not necessary.

When the drawers are assembled, it is necessary to properly strengthen the guide elements. The full rollout guides must be divided into 2 parts. The wide part is attached to the side of the cabinet, the narrow part to the side of the drawer itself. The guides are fixed with a slight indentation from the side of the cabinet (about 3 mm) and then proceed to attaching the drawer fronts. First of all, holes are drilled in them for further fastening of the handles. Through the same holes the facade is attached to the main part of the box.

The rough fastening is done first; once it is completed, you need to check the functioning of the box and only then fix everything completely.

Exist different kinds fasteners, however, as experts say, it is best to use confirmed fasteners for drawers. If the drawers are small, the number of corners in them is counted and the number of required confirmations is obtained. Drawers also need a pattern. The most difficult stage in their manufacture is the bottom. Since the drawer is retractable, unlike an ordinary one, it is mounted in 2 stages. First, they do everything rough, check that the drawer is installed correctly in the bedside table, and only then attach everything completely.

If the box is made of solid wood, after finishing assembly it is better to immediately open it with varnish. When you need drawers for laundry intended for washing, and when there are no drawers for them large sheets wood, then you can make them from thin planks. They are suitable for making frames, bottoms and fronts of drawers.

And for the manufacture of sidewalls you can use plastic mesh, which will provide additional ventilation to things. In some cases, metal mesh is also used to make such boxes.

If you need one large non-pull-out linen drawer, it is made using the same technology as for tools, only the dimensions are adjusted.

1. Basic principles
2. Basic model
3. Balcony flowers
4. For seedlings
5. Design ideas
6. Advantages

IN Lately come into fashion natural materials. Any products must be easily disposed of without harming nature. In this regard, wood is an excellent alternative to plastic, from which you can build an excellent flower box. It will look organically on personal plot a private house and on the balcony of a high-rise building.

Basic principles

Flower boxes can have different purposes, depending on this they decide design features. The box can be used directly for planting and as a stand for flower pots taken out of the house.

The first option should be thought through much more carefully. First of all, the material must be treated with a solution that protects against moisture. Untreated wood will quickly rot due to constant watering. Don't forget about the drainage holes at the bottom.

The second option is much simpler in design; it can be made from simple slats. Such boxes often perform the function of quickly carrying home flowers to Fresh air. The pots can be beautifully arranged inside and the flowers can be taken outside. In case of rain, capricious plants It’s easy to bring into the house and you don’t have to fuss with every flower.

Box - great alternative street flower bed. The flowerbed is stationary, and the box can be easily moved and quickly change the atmosphere in the yard. They can cover a hatch or other unsightly object. In addition, it is difficult to do in a flowerbed required mixture soil for each plant.

Basic model

Despite its simplicity, a standard box leaves room for creativity. Base Box Combinations different sizes will help you create an original composition.

To work you will need:

• Board 50×100 mm for making the bottom;
• Board 50×200 mm for side walls;
• Board 20x90 mm, the front part will be made from it;
• Self-tapping screws or nails made of stainless steel;
• Chainlink mesh to create a drainage system;
• Polyethylene film for additional protection of wood from moisture.

First you need to develop a design layout in accordance with your needs and make drawings. It is better to plan the composition in advance so that the flower boxes fit organically into the space. For example, if you plan to place them along the wall, then you need to measure the distance so that you don’t have to redo the protruding elements.

1. In accordance with the drawing, we cut the boards to make the box;
2. We knock together the bottom and side boards;
3. We nail the front and back walls;
4. Cut out a piece of mesh the right size and attach it to the bottom with a stapler;
5. We cover the film to the height of the soil, and make several holes above the drainage gutter for water drainage.

All that remains is to fill the soil and plant flowers. This simple design makes it easy to stack flower boxes on top of each other and create a multi-level flower garden.

Carefully measure the size of the future structure. Flower boxes often do not fit flush against the wall, or, on the contrary, they overlap; be sure to take this into account when drawing up the drawing.

Balcony flowers

More and more often, when walking down the street, you can see balconies and windows decorated with flowers. For outdoor decoration, it is better to use long, but not deep flower boxes. Their height should not exceed 20cm. The earth, especially wet, weighs a lot, so such restrictions are necessary.

The flower box can be attached using hinges, brackets, or simply placed in a forged base. If they take for disembarkation houseplants, it is necessary to provide for the possibility of removing the structure for the winter so that the flowers do not die.

There are several tips to help minimize the maintenance of your balcony front garden:

• It is better to paint a box with flowers on the south side in light colors, bright ones fade quickly. Preference is given to natural shades. Brown or green work well. The main rule is that the box should not be brighter than the flowers themselves;
• Pay attention to the stability of the structure, poor installed mounts will not be able to withstand the required weight;
• Drainage holes should not be located too close to the wall, otherwise dirty smudges will remain. It is better to place the holes on the far wall or provide a slight slope;
• Flowers are often planted in 2 rows: the first is climbing plants covering the box itself, the second is the flowers of the main composition. This arrangement allows you not to pay much attention to the design of the box and put it together from simple boards.

For seedlings

In stores now a large number of various containers for seedlings, but experienced gardeners know that production does not take into account many important nuances, among them:

• Fragility;
• Toxic material, which is often low-quality plastic;
• No drainage holes or holes that are too large
• Inconvenient size.

All this does topical issue how to make a box with your own hands. For this you will need good boards, wood glue or nails, drill. First of all, you need to calculate the dimensions and make a drawing. Seedlings, as a rule, are grown on a windowsill, and a box needs to be adjusted to fit it. For ease of carrying, you should immediately provide handles.

Wood also makes excellent individual boxes for seedlings; they are necessary to prevent plants from getting tangled by their roots. Considering that only young seedlings will grow, the height of the box should not exceed 10 cm.

It is better to assemble the main box using nails or self-tapping screws. To make individual compartments, special glue or a furniture stapler is suitable. It remains to decide how to make a wooden box with seedlings not just functional, but also beautiful. A little varnish or paint Nice picture, and the seedlings will become an excellent decorative element.

Seedlings can become an apartment decoration

Design ideas

You don’t have to make the boxes yourself, you can take a ready-made one wooden box. This could be a regular garden box, a tool box, even antique chest. A little decor will add color, but sometimes you don’t need to do anything, non-standard application the item speaks for itself, example in the photo:

Don't be afraid to experiment and use things for other purposes.

Wooden tubs used to be often used at home for planting tall plants. Today they are appropriate in the garden. Several tubs with bushes can become an excellent hedge or act as independent elements.

Decorative boxes with flowers are often made with an emphasis on naturalness. The surface is varnished to protect and highlight the wood texture. If paint is used, it is often noble brown or, on the contrary, light and delicate tones. The main goal is to draw attention to the colors, and not overshadow them with bright colors.

For decoration you can use beautiful vintage patterns. For country garden Country style suits. Not many people know how to make a box look aged. A sample of suitable size needs to be slightly burned with a torch. Special attention pay attention to the corners and joints of the boards. Clean the surface and varnish. On top you can make an imitation of an old stamp. Making such things does not take much time, but it greatly affects the color of the area.

Advantages

Everyone wants to decorate their garden in accordance with their ideas of beauty, but not everyone can order exactly what they want. The cost of work is often scary individual order. It's not that difficult to put together flower boxes with your own hands. This choice has many advantages:

• The cost is much lower than the market price and even more so for custom work;
• The drawing will help you do exactly what you want, and not choose from what is available;
• A DIY wooden box will always be original thing, few people will be able to repeat the design option exactly;
• It’s easy to assemble a box of the right size and dimensions yourself;
• You can make boxes with your own hands different forms, but decorate them in the same style, observing the general concept of the garden.

Even a non-professional can make a flower box. Wood is a material that is easy and pleasant to work with. A regular ruler will help you make the correct markings. A box with flowers gives the area its own unique style, and you can rearrange it every day, updating the space in accordance with your mood.

A box for storing various small items and products is considered an indispensable attribute in modern economy. Thanks to this design, everything is in its place without creating clutter. For example, vegetables and fruits should be stored in a ventilated structure where fresh air can easily enter.

Monolithic products without any holes are suitable for tools. Designs with additional doors and a folding mechanism are suitable for various small items.

We offer original options DIY storage boxes. Here you will find out what materials and tools you will need to make these products.

What materials are used to build structures?

Most often, boxes are made of wood and other materials. For instruments, it is better to choose solid pine or maple. Alder or aspen is suitable for products. These tree species are distinguished by their durability and strength. They do not emit resinous secretions and do not dry out over time.

Plywood is suitable for making decorative items. You can place all sorts of little things here. To fix the parts, a special adhesive composition is used.

Master class on creating a box with your own hands

We offer step by step instructions how to make a box at home. To do this you will need the following tools and materials:

• tape measure;
• a simple pencil;
• board 25 mm thick;
• wooden edges 15 mm thick;
• thin plywood;
• metal corners;
• nails and screws;
• hacksaw;
• screwdriver;
• metal hinges for opening the lid structure;
• hammer.

First of all, you need to familiarize yourself with the diagrams and drawings of how to make a box. This will allow you to correctly compare the dimensions of the finished product. You should not make too large structures, as they will take up a lot of free space.

When all the components are ready, you can proceed to making a storage system for vegetables and fruits. The process includes several stages:

On the surface of the boards we mark the size of the side parts of the product. Next we move on to the bottom of the box. We mark the size on the wooden edges. After this, using a hacksaw, we begin to cut out the blanks.

We fix the boards together using small nails. We attach the bottom parts using the same method.

The cover of the product consists of a plywood sheet. It is installed on special hinges that allow you to control the closing process.

The photo of the DIY box shows the entire work process.

Tool storage box

This type of design is considered best idea DIY box. This product will allow you to keep all your working tools in one place. Here you can make additional sections for storing screws, nails and nuts.

To do this you need to prepare:

• thin board;
• thick plywood;
• hacksaw;
• electric jigsaw;
• hammer;
• screwdriver;
• tape measure;
• drawing of the finished product;
• metal corners.

On sheets of thick plywood we make markings for the drawer parts. After this, we drill holes for fastening the metal hinges. Next, we connect the side parts to each other.

Let's start making the bottom for the storage system. To do this, we attach a thin board to the sides of the box. To prevent it from collapsing under the weight of tools, it must be strengthened with thin boards. To do this, several wooden elements are stuffed on the bottom surface.

On the side parts of the plywood we draw markings for the handles. They will be cut inside the main body of the product. Here you will need an electric jigsaw. The cutting base is installed at the beginning of the marking.

In the process of cutting out parts, you should not make sudden movements. They can cause cracks to appear on the surface of the product.

Now let's start installing the partitions. To do this, cut out a small square from thin plywood. It is fixed with metal corners in the middle of the structure.

The diagram shows a detailed view of the tool box. The drawing shows the exact number of parts:

• side parts – 4 pcs.;
• bottom – 1 pc.;
• septal wall;
• handles – 2 pcs.

DIY photo of boxes

In the course of his life, a person accumulates a lot of small property, which can only sometimes be useful for some need. In our cramped living spaces, there is often a problem with the location of such things.

To solve this issue, you will need a neat container that can be placed in any corner of your living space. The most practical and environmentally friendly option, of course, is a wooden box.

With him independent production You can use all your imagination and make a unique masterpiece. Fortunately, wood is the material that allows you to make truly original designs.

Why tree

Since ancient times, folk craftsmen have used to make various designs tree. Houses were built from this material and served their owners. long years, providing them with comfort and coziness for living.

The tree is natural material, which is easy to process and has high environmental performance. Wooden structures have an aesthetic appearance and emit favorable odors.

Of course, this material has its drawbacks, the main ones being rotting and flammability. But when the right approach to wood processing and caring for it in the future, such troubles can be easily avoided.

Any man wants to produce some product with his own hands. Wood is exactly the material with which you can experiment and make something that will not only become a necessary piece of furniture, but will also add unusual aesthetics to the interior of your living space.

To work with wood you will need special tool, which a good owner always has at hand. The choice of material must be approached thoroughly, giving preference to the most durable types of wood so that the product lasts as long as possible.

The very first thing to do is to determine the place where the wooden box will be located and carefully take the required dimensions.

• according to the measurements received, cut structural elements drawers - four walls, a lid and a bottom;
• we connect the side walls one by one using nails or self-tapping screws;
• we screw the bottom of the product, starting from opposite corners, to avoid its displacement;
• Finally, we install the lid of the box, which allows it to be tilted using piano hinges.

With the help of simple manipulations, the wooden box is ready for use. The product is refined based on your preferences and tastes.