Stone cladding for exterior finishing. Facade panels for exterior decoration of a house: overview of types

The technology of finishing the base with panels that externally imitate stone originated in Canada and the USA, but is now becoming more widespread due to a lot of advantages. The panels we are talking about in this article are a type of siding and it is easy to guess that they look like stone in appearance. They are produced using high pressure casting.

Despite the fact that sheathing the base with this material is beneficial from many angles, the installation must be carried out very accurately and carefully, however, the same applies to other finishing materials. So, let's look at how the base should be finished with stone panels.

The base is the part of the foundation that is located above the ground. One of the functions that the plinth performs is to protect the building from moisture, including rain. The plinth bears both functional and architectural load, so this part of the house must be treated very responsibly. The plinth also provides thermal insulation between the main space of the building and the basement.

Interesting! Architects believe that the base should be attributed to the wall, its lower part, but builders, on the contrary, are sure that it is still an element of the foundation.

Advantages and relevance of covering the base with stone panels

Firstly, modern materials have an excellent design and significantly improve the exterior of the building. Secondly, the technique allows you to increase resistance to moisture, which allows you to forget about problems with foundation cracking for a long time. If liquid gets into the voids of the material from which the base of the building is made, it will freeze in cold weather, and, as you know, ice has a larger volume than water, and cracks will eventually appear. To better understand the principle, you can put a PET bottle filled to the top with water in the freezer overnight - in the morning the container will be greatly deformed. The same thing happens with building materials if moisture gets into them.

The plinth bears a much greater load than the façade, so this part of the building must be treated with care. great attention. Temperature changes that cannot be avoided and currents can have a bad effect on the condition of the base. groundwater, the pressure of the house itself, precipitation in the form of rain or snow.

Finishing the base with panels - features of material and fastening

One of the methods that have proven themselves to be excellent in protecting the base is special panels stylized to resemble a stone structure. Among the important positive aspects it is worth highlighting the following.

Base siding "Alta-profile"

Price for decorative stone

Decorative rock

Flaws

It is difficult to find really serious negative aspects of panels for finishing the plinth, but a couple of points can be pointed out.

Limitations in color. It will not be possible to choose a shade to suit your taste, since the external appearance of the panel is stylized to resemble stone, which has specific dim colors. But, if you were unable to choose the desired design in store catalogs, you can always contact the manufacturer directly and place an order according to your taste. Whether it is worth paying extra for such a service is up to you to decide.
Despite the fact that the panels resist loads and the influence of many destructive factors very well, Fire resistance cannot be expected. Since the main material of manufacture is still plastic, the panel will quickly melt at elevated temperatures, and therefore it is not worth grilling kebab or burning garbage near the house.

Materials from which stone panels are made for basement finishing

The production of such products is carried out only using new, innovative technologies that emerged thanks to the hard work of highly qualified specialists. Only materials that are highly resistant to low temperatures and are endowed with water-repellent properties. Also, they (the materials) should not crack in winter and in strong winds. Most often, polypropylene is used as a basis, which is formed by casting; the characteristics of such panels are always the same high level.

In general, it is possible to use different polymers if they have added chemicals that increase the life of the product. The choice of base material directly affects the cost.

Existing types of panels

Before you choose and purchase required amount panels, you need to deal with existing species these products, with all their features, strengths and weaknesses. Each variety has some differences that need to be taken into account. Today, 4 types are widely used, which are presented in the table.

Table. Popular types stone-look plinth panels.

Panel view	Features and Benefits
	Fiber cement panels stand out from the entire range of products due to their increased strength characteristics and high degree of weather resistance. Such products are difficult to distinguish from real stone; they do not harm either nature or human health.
	These plinth panels are made on the basis of vinyl plastic, they can also add a variety of specific dyes, so color palette here is the widest, it is also easy to choose the desired texture. Ideal for those for whom the visual impression of the appearance of the house is extremely important.
	Acrylic plinth panels are highly resistant to harmful ultraviolet solar radiation. They are capable of maintaining their original color throughout their entire period of use. The presented panels can withstand prolonged shock loads.
	They are good in cases where it is necessary not only to strengthen the base and make the interior more pleasant, but also to improve thermal insulation. The structure of such panels has several layers, the topmost of which is decorative and is finished to resemble stone. The rest are important from a technical point of view.

What does the cost depend on?

The price will depend on several factors. Firstly, this is the country that produces the siding and the specific company - the more reputable the company, the higher the cost will be. The material used, what polymers, modifiers, etc. are also affected. If you select easy-to-install products that have large sizes, then the price for them will be higher than for small options. If you want to save money, then you should not choose elaborate panels, since the intricate texture and multi-colored colors significantly increase the cost. How better characteristics products, that is, resistance to temperature changes, strength, resistance to wind - the more expensive it will cost.

Important! Worth paying attention to a domestic manufacturer, among the products they present on the market you can now find very good specimens not only in appearance, but also in characteristics, while the price is an order of magnitude lower than that of foreign analogues.

Prices for popular stone-look finishing wall panels

Stone effect wall panels

Panel selection

When you start choosing stone-style panels for finishing the base, you need to pay special attention to several parameters. If the product is of high quality, then the characteristics specified by the manufacturer will be high, and the appearance should be appropriate, without defects. The material greatly affects the rate of fading under the sun, if the base is not in the shade and you want to preserve the beautiful exterior for a long time - find out more from the seller.

It is better to buy panels in places where there are big choice different products so that there is plenty to choose from. Term successful work is also very important: if a company has existed for several years and has accumulated many customers with positive reviews, it means it sells a quality product. Decide what is more important - convenience during installation or savings. If the first, then you should pay attention to large panels, but if the second, then to small ones. TO good product A license and certificate are required to guarantee quality.

The facade, lined with Dagestan stone, looks prestigious and creates the impression of wealth of the homeowner. However, the costs of such finishing are relatively small and comparable to the costs of installing a “wet facade”. Therefore, at a relative low cost you can get an impressive result. Read more in .

Panel installation

Installing the panels under the stone is easy. You need to be very careful and pedantic in the process, carefully carry out all measurements and calculations.

We will tell you how to install correctly finishing panel on a concrete base.

Prices for cordless drill/driver

Cordless drill/driver

We will need:

roulette;
circular saw with diamond blade;
perforator;
fasteners.

Step 1. We calculate the required number of panels in one row. To do this, divide the total length of the wall (minus the space for corner elements) by the useful length of one panel.

Step 2. If there is not enough part to cover the entire length of the wall, or you need to install panels along the contour of a window or other element without covering it, use a tape measure and measure exactly how the panel needs to be cut. Using manual circular saw With a diamond disc or hacksaw, we cut out the part we need from one panel.

Important! You should not cut off more than 1 part from each product, otherwise the result will not look so natural.

Prices for angle grinders (grinders)

Angle grinders (grinders)

Step 3. Let's move on to installing the panels. We lean the product against the base exactly in the place where it will be located. We need to drill the mounting hole using a hammer drill, after which we use special fasteners for reliable fixation.

Step 4. We move the next panel, fasten it in 6 places so that it is resistant to the wind - 5 fasteners on top and 1 on the side. The top line of fastening should start from the center.

Step 5. We make sure that the mount is not too rigid to ensure proper response to temperature changes (expansion compensation).

Important! Gaps are also needed between the panels for the same purpose. If you are installing in winter, then the joint width should be about 15 cm, and if in summer, then no more than 10 cm.

Video - Installation of plinth panels

As you can see, the installation process is not at all complicated and does not take much time; at the same time, your house will be insulated, and the base will be strengthened and protected from moisture. The technology makes it possible to simply and cheaply add elegance to the exterior and increase the life of the building.

Today widely used plastic panels under stone for finishing building facades for various purposes. Complex positive characteristics materials cannot be overestimated, since the basic requirements for them, such as thermal insulation, moisture resistance, long service life and aesthetics, are at a high level. Plus, the cost of such finishing is much lower natural stone.

Types of panels for facade cladding

According to their decorative properties, all artificial imitators are divided into the following types:

Features of the material

Facade panels under the stone are divided into two types:

With a single-layer structure, that is, made of PVC and its derivatives.
Combined panels.

The second type has an advantage over the first. So, outer layer made from polymers or other materials, and the inner one is made of polystyrene foam.

This material - excellent insulation. So we found out that decorative facade has an addition in the form of insulation. Sometimes foam plays the role of polystyrene. The foam is connected to a plastic coating that imitates stone without the use of glue or locks.

This material has main feature- He perfectly tolerates temperature changes and moisture. Moreover, he is able to withstand sudden changes in it within one day. At the same time, its deformation due to the low coefficient of linear expansion is completely eliminated. Such panels, depending on the customer’s taste, can be presented in any color and texture.

Main advantage of this material lies in its low cost compared to natural finishing stone. In addition, installation work is much easier and takes less time, which cannot be said about stone laying. Installation of such panels can be done in any weather, with virtually no dust.

Thanks to what is provided corner mount panels, the time for drawing corners is significantly reduced. Cladding material has little weight, therefore the load on the wall and foundation is significantly reduced. The installation process is so simplified that even an adhesive base is not required.

Decorative stone panels for facade cladding

Advantages of stone-look facade panels

Decorative

Summarizing all of the above, one thing we can say is that such a construction material, which would be in short term changed the appearance of the entire house. Thanks to this finish, which has excellent decorative properties, the façade can be transformed before your eyes. Moreover, installation is carried out without the use of expensive equipment. The panels are attached to each other, which speeds up the process of cladding the house; everything happens without installing any special frames.

For country house finishing the facade using decorative panels under a stone will be a great solution. Any the house in such attire will be transformed and come to life against the backdrop of a composition of the local landscape. A wide palette of colors allows you to choose an individual shade that will perfectly fit into the surrounding countryside landscape.

Insulated

By installing panels under stone, two problems are solved at once. One of them is external beauty, and the other is comfort. After all, the foam layer of material is perfectly used as insulation. In polystyrene foam excellent thermal insulation characteristics , which are significantly superior to polystyrene foam. Thanks to this, two goals are achieved: insulation and renewal.

Thus, there is no need for additional expense funds for façade insulation. This technology allows you to significantly reduce heat loss, especially noticeable in the cold season. Plastic facade sheets that look like stone protect the house well from dampness and fungus; this material completely eliminates mold.

Manufacturers and price in Russia

The leaders in the production of stone-look facade panels are the following companies:

German leading manufacturer Döcke-R;
Canadian company Novika;
Nailaite (USA);
Russian company Alta Profile.

Price

The cost of facade panels for cladding a house depends on the quality, material, and imitation of the type of stone. In addition, the price of panels and services also depends on the region and can vary significantly. The cost may also depend on the policy of the trading company. Average the price of this material is in a wide price range from 300 to 1500 rubles. Therefore, you can approach the choice of material taking into account both taste and a suitable price.

This finishing material is sold in our country at a reasonable price. Thus, the “Rocky Stone” collection will cost about 430 rubles. There are more expensive models, for example, “Natural Stone” will cost 580 rubles.

You need to know that the price is indicated for one package containing 10 pieces. They are enough for 5.32 m2. To cover the facade of a house with an area of up to 100 m2 with stone panels, you will need an average of 20 packages with a reserve for cuts. As a result the price decorative finishing stone panels will cost approximately 12 thousand rubles. It is worth counting additional components. It should be remembered that the finished facade will be in use for 50 years, then this amount It won't be that big.

Thus, facade panels imitating stone will not only be an excellent design solution when decorating the exterior of the house, but also will allow significant financial savings, when compared with the cost of natural stone. This cladding will create a feeling of integrity of the structure of the building and give it some majesty, just like the stone itself.

Stone panels

Our company offers a wide range of facade panels imitated with natural stone in Moscow and the Moscow region. High quality, affordable prices, a huge selection of products for every taste will allow you to make a profitable purchase in our online store.

Panels are designed for exterior finishing facade of the building. This great option, which makes it possible to quickly, efficiently, and beautifully cladding any structure, be it a residential building, a country cottage or an office center.

The store features products from the leading Japanese brand KMEW, which is considered one of the leaders in this field. Our company is the official representative of the specified trademark, supplying exclusively original panels for facade cladding. You can not only buy materials from us, but also order professional installation"Full construction". The work performed is provided with a two-year guarantee.

Characteristics

Facade panels imitating natural stone are an excellent alternative to the latter. Stone cladding cottages and other buildings - it’s expensive, stylish, impressive. Facade panels look no worse and allow you to achieve the same classic look, but with a number of advantages:

more affordable price;
lightweight and quick installation;
light weight;
reduced load on the walls and foundation of the building.

Finishing the facade of a building with natural stone is a long, hard job associated with a lot of restrictions and inconveniences. Price natural materials very high, during their processing a lot of dust, cuttings, construction waste. Siding panels that imitate different types of stone are free from all these disadvantages. They cost several times less, do not require additional processing, can be mounted on walls quickly, with minimum quantity waste.

In addition to its decorative function, high-quality siding also serves as insulation and waterproofing. Properly installed exterior panels:

retain heat well inside the building;
do not suffer from exposure to rain or snow;
They tolerate high and low temperatures very well.

The manufacturer specially designed the panel dimensions so that they are optimal for installation. Standard dimensions– 3030x455 millimeters. Such elements are easy to transport and convenient to mount on the wall of the house. In addition, they do not dazzle the eyes; they create the correct picture with a natural pattern.

An important feature of KMEW brand panels is their extremely accurate and naturalistic imitation natural stone. Lined facades look attractive, perfectly repeating the texture stone finishing. After installation, the siding is painted in stages to achieve maximum natural color.

The online store offers a convenient online calculator that will help users independently calculate the required amount of materials, taking into account the area of the facade of the house.

Finishing the facade is one of the most important activities. Not only the appearance, but also performance characteristics building. One way to quickly and efficiently cope with the task is to use facade panels for exterior decoration of the house. They are different from various materials With different characteristics and spring appearance.

Types of facade panels

Facade panels for exterior decoration of a house are a solid group of materials with various technical characteristics, made from different materials. To choose, you need to have at least a rough idea of their appearance, features and properties.

For finishing the facades of private houses

Not all facade panels are used for cladding private houses. The point is not that it is “impossible”, but that they are not suitable, and almost all in appearance. Other reasons are the complexity of installation and high cost. Today you can find the following facade panels for exterior decoration of the house: different types. We list them all below.

Facade siding

A well-known finishing material in the form of long planks mounted on a frame. Eat traditional options painted in one of the colors, there is an imitation of timber, logs, and brickwork.

This is the most available material for finishing the facade of a house, but it is too thin and has low resistance to mechanical damage. One more nuance - sunny side fades, and not everyone likes the appearance.

Basement siding

Basement siding is also made from polymers - PVC (vinyl), polypropylene. Available in rectangular panels, some with locks on the edges. Basically they imitate brickwork different colors and textures, wild or faceted stone.

Basement siding is made from polymers. The cheapest - made of polyvinyl chloride (PVC) and polypropylene

The mass from which the plinth facade panels are formed is colored in the mass, so scratches and other damage do not differ from the front surface. They differ from facade siding not only in shape and price (more expensive), but also in greater thickness (20-30 mm, versus 15 mm) and a more believable imitation of stone or brick.

Fiber cement facade panels for exterior home decoration

Fiber cement is environmentally friendly pure material, which is obtained from a mixture of fiber (small synthetic fibers) and cement. The mass is formed into boards or slabs, after which they are painted. They were invented in Japan, which is why they are also called “Japanese facade slabs”.

Fiber cement boards are a serious finishing material

Disadvantages: large mass and coloration of the surface layer (the cement base is visible on deep chips). The advantage is that the material does not burn and does not support combustion. If we talk about price, then Japanese stoves are expensive, but there are analogues of Chinese and domestic production with more reasonable prices. Chinese A-Vent groups, by the way, are of good quality. The company has been on the market for a long time, reviews are mostly good.

WPC (wood-polymer composite)

Wood ground to fibers is mixed with liquid polymer, and a dye is added. Slabs or boards (lining, planken) are formed from the resulting mass. This material is used not only for finishing facades; it is used to make flooring near the pool, in the gazebo, and on the open veranda.

In appearance, and even in tactile sensations, wood-polymer composite is very reminiscent of wood. The difference is that these “boards” do not need to be painted or varnished. They long time retain their original appearance. The disadvantage is considerable weight and high price. But they are durable, since they are painted in bulk, chips and damage (if any) are not visible.

Porcelain tiles

The appearance of this material is known to everyone, since a thinner variety is used for finishing the floor. Facade porcelain tiles are thicker and larger in size.

Facade cladding with porcelain stoneware has significant disadvantages: heavy weight, complexity of cutting and installation, which entails high cost installation work. And this is a plus to the fact that the material itself is far from cheap. The disadvantages also include an overly pompous appearance, so the architecture must be appropriate. And so, finishing the house with porcelain stoneware facade slabs beautiful, durable, resistant to climatic factors.

Clinker facade panels

This multilayer material. A layer of insulation (expanded polystyrene) is glued onto a layer of OSB (not always available), and a thin clinker tile is glued onto it. There is only an option made from expanded polystyrene and clinker. Available in rectangular blocks with jagged edges.

Clinker facade panels - finishing and insulation in one “bottle”

The material is not cheap, but at the same time durable and attractive in appearance. In addition, simultaneously with finishing, the thermal insulation characteristics are improved. This is the only material that comes along with insulation, which is why it is also called façade thermal panels.

So which is better?

It is impossible to say unequivocally which of the listed materials is better. In appearance, many of them are similar, although there are exceptions. For example, porcelain stoneware or facade siding can hardly be confused with anything else. But all the others have a similar flourishing. So in this matter you have to focus on your own preferences.

About operational properties There are no clear favorites either. All have features and disadvantages. So, based on these parameters, it is necessary to select facade panels for the exterior decoration of the house, depending on the properties of the material from which the house is built and the need for heat/wind/sound insulation.

For example, it is better to finish vapor-permeable walls without foam. It does not conduct moisture. At all. In this regard, the use of clinker thermal panels is undesirable. No, you can add it from inside vapor barrier material. The vapor barrier will block the access of moisture inside the wall, everything will be fine with the finishing. But the moisture will remain indoors. To remove it, you need a powerful ventilation system, and its installation is an expensive proposition. And it must be designed at the stage of designing the house. So thermal panels can be used on houses made of wood or aerated concrete only if they are installed on the sheathing. Direct wall mounting is no longer required.

If we talk about cost. Of all the options listed, the cheapest finishing method is façade siding. The next most expensive are basement siding, fiber cement boards and WPC. And the most expensive are porcelain stoneware and clinker facade panels.

For decoration of industrial buildings and offices

In this section we list façade panels that are most often used to decorate offices, industrial, commercial or warehouse buildings. This does not mean that they cannot be used for a private home or cottage. It’s just that their appearance is not very suitable for a “home” in the broad sense. But houses with non-standard architecture - in the style of techno, minimalism and other similar ones - are very possible to decorate. They will look even more unusual.

Metal panels. Available in rectangular or square blocks different sizes. They are made from steel or aluminum. Steel ones are cheaper, but are susceptible to corrosion. Aluminum ones do not corrode, but are expensive. This type of facade panels for private houses is also widely used due to their “noisiness,” which makes them the least attractive of the entire group.
Metal facade panels - for houses of non-standard architecture
Translucent panels. This type of facade panels is used for finishing office high-rise buildings. They are made from transparent sheet plycarbonate or double-glazed windows - several glasses installed in one profile. In private housing construction they can be used to install winter garden, covered, glazed large terrace, balcony, loggia. They can be made of transparent material, painted in the mass or coated (mainly mirrored on one side). It is probably possible to decorate the entire house with translucent facade panels, but for this you need to involve an architect - the material is too demanding in terms of aesthetics, and even with difficult technical specifications installation
Translucent panels - for decorating winter gardens, covered verandas, gazebos
. Available in large format blocks. These are two metal plates (the front one is very similar to corrugated sheeting), between which there is a heat insulating material. Purpose: finishing of industrial and warehouse buildings. It is not suitable for private houses for aesthetic reasons, although it can be used for summer cottages if there are no too high requirements for appearance. It is possible to build technical premises from them - gatehouses, .
Sandwich panels - for quick construction
Aluminum composite plates. One of the varieties of sandwich panels. Between two flat sheets There is a layer of aluminum composite material. Again, not very often seen in the private sector. There are two reasons - the high price and the same “office” look, although it may be suitable for finishing the base, since aluminum-composite finishing is not as “noisy” as just “metal”.
Aluminum composite plates - two sheets of metal with a composite layer

As you can see, any of the materials in this group can also be used to decorate a private house. The look will be non-standard. If this is what you need, choose the appropriate option.

Installation method

Facade panels for exterior decoration of a house are made of different materials, have different shape, but their installation method is very similar. During the installation process, special elements for fastening can be used, but the device is the same - based on the principle of ventilated facades. In short, the installation looks like this: a grille is assembled from profiles, and façade finishing panels are attached to it.

Facade panels for exterior finishing of the house are attached to a special frame. It is exhibited in horizontal and vertical plane, after which facade panels are screwed onto it for exterior decoration of the house.

The frame is assembled from metal and plastic profiles, sometimes wooden blocks are used. Wooden beams are an economical option, since in most areas of the country they are much cheaper than metal products. But it is only suitable for materials that are light in weight and not particularly demanding on the installation system.

Facade and basement siding, fiber cement boards, WPC, and clinker panels can be attached to the bars. Only before installation, the wood must be treated with antibacterial and fire-retardant compounds. The bars can be replaced with galvanized drywall profiles. They also do a good job. But we must remember that most façade panels have their own system of profiles with special fastening elements. The standard mount usually provides secret installation- without damage to the front surface. When replacing profiles with timber, you have to drill holes in the finishing for installing fasteners, and this is not very good, as it breaks the tightness.

The good thing about the ventilated façade system is that, simultaneously with finishing, the building can be insulated and sound insulation improved (by laying appropriate materials between the profiles). Another important advantage is that the problem of removing condensate can be easily solved. Disadvantage: significant material costs on the fastening system itself (in addition to the cost of the facade panels).

Let's take an example of how to decorate a facade with basement siding, fiber cement and clinker slabs. Why these materials? Because about, and the given materials are the closest competitors, gradually ousting it from the market.

Installation of basement siding

From traditional lathing to linear Decoration Materials(siding, for example), installation basement siding differs in that the sheathing must be “in a cage” - the profiles/bars must pass at the junction of the panels. Since the basement siding looks like a rectangle, the sheathing should also look like it. Another feature is the installation of a starting and J-profile. They cover the sections of the material, provide support, and give a finished look. They are not that expensive, so there is no point in trying to get by without them.

And we must also remember that there are special corner panels for decorating the corners of the building. They are purchased separately, and often have a different color or even a different texture. So even rectangular or square house looks more interesting.

The procedure for installing basement siding is as follows:

That's the whole installation of basement siding. After the sheathing is assembled, the process goes quickly (if the sizes of the panels match and there are no problems with shades).

How to install fiber cement boards

Fiber cement facade panels for the exterior of a house can also be mounted on a lathing made of wooden blocks, but they will have to be fastened through, having previously drilled a hole. The standard frame for installing fiber cement slabs consists of horizontal and vertical profiles. In this case, the plates can be installed on clamps - special plates for hidden installation.

Frame assembly

The operating procedure is as follows:

When fastening with self-tapping screws, they are screwed in so that they fit into the profile. In this case, you must try to get into the technological recess (the seam between the “bricks”). In this case, the fastening is less noticeable.

Fastening fiber cement boards to the frame

Fastening with clamps is secret. In this case, the surface of the plate is not damaged. The clamps are attached to the profiles and hold the slabs with special tongues. The operating procedure is as follows:

The lower tide is installed.
The starting bar is attached.
The corners are set.
The first row of slabs is placed in the starting bar and secured with clamps on top. They are placed, trying to get into the established profiles.
The next sheet rests on the protrusions on the clamps. WITH reverse side The fiber cement board has a special seal that guarantees the tightness of the connection.

This installation method is invisible - the clamps are positioned so that they are behind the panel, and the protruding tabs are covered with the next fiber cement board.

Most ventilated facades are installed according to this principle, which includes all or almost all facade panels for the exterior of a house. The shape of the profiles and clamps, the installation step, are different, everything else is very, very similar.

Installation of clinker facade panels

As has already been said, any facade panels for exterior decoration of a house are mounted according to the same principle, so let’s only talk about the differences that are specific to clinker thermoblocks.

Features of choice

Their main difference is that they come immediately with insulation - expanded polystyrene. When choosing them, you need to choose not only the quality of the clinker (when struck with a metal object, the sound should be clear). It is important to choose the right insulation thickness. The dew point should be within the thickness of the insulation. This is very important for normal operation (the walls will not get wet and freeze, the house will be warm and dry).

Second important point: on smooth walls(height difference no more than 3 mm) they can be mounted without lathing, directly to the wall. In this case, you need to use long dowels or self-tapping screws (when installing on wooden walls). Otherwise, the frame is assembled from wooden beam, which compensate for all irregularities.

How is installation different?

Other significant installation differences:

Clinker facade panels for exterior finishing of a house after installation look exactly the same as a house built from clinker bricks. You won’t find any differences either at first or second glance. Unless the masonry is too perfect.

It will also be useful for you to learn about on our website.

Plastic facade panels are most often used for exterior finishing of facades. Sometimes they are called. This material has great strength and is quite easy to install. It is recommended to install it with insulation: this will allow the house to retain heat inside for as long as possible.

Installation Features

Most often, conventional ones are used for installing vinyl siding. wooden slats. Sometimes they are replaced with a special metal CD profile. The same profile is used for installing drywall indoors. Considering that the panels will be mounted outdoors, it is better to use hardware, since wood tends to absorb moisture, which significantly reduces its service life.

You should choose a CD profile with a cellular frame: this will make it easier. The profile should be placed vertically; Each strip is mounted at a distance of 35 cm from the adjacent part. Only the top and bottom strips are installed horizontally.

In order to install the profile, metal hangers are often used. They are bent in a U shape and attached to the wall using screws or dowels. The distance between the dowels should not be more than 50 cm. It is optimal to place them at a distance of 40 cm from each other.

The panels will be located at a short distance from the main wall, creating decorative surface. These voids can be used by placing insulation in them. Often used as insulation mineral wool or polystyrene foam. When installing siding with imitation stone, it is important to ensure that there are no gaps or cracks.

Often the siding does not fit ideally in height, and the last row has to be shortened yourself; but there will be no mounting holes on the panel. The sheet should be fastened in such a way that the screws pass along the decorative seam. Three fixation points are enough for one sheet.

To decorate the facade with a stone look, it is best to use façade panels, since they are specially designed for this purpose. The price of the material is much lower than that of natural stone, but, unlike the latter, siding always looks perfect and is easy to install.

In addition to ease of installation, siding has the following advantages:

It is easy to clean and does not require any additional maintenance.
Using siding will allow you to insulate the wall and hide the insulation without additional costs.
The material does not allow moisture to pass through and will protect the walls from it.
No required cement mortars, which are quite expensive.
The material itself is much cheaper than natural stone and has a form convenient for installation.

Install vinyl siding It’s quite possible to do it on your own. This will require a little time, a minimal set of tools and a little patience. Even an amateur can handle the installation.