Processing and artificial aging of wood. Everything about sandblasting wood Why use us?

The fashion for materials in construction is changing. Today, ubiquitous plastic is being replaced by original solutions based on wood raw materials. Wood is a strong and durable material. But it requires quite high processing costs compared to artificial materials. Sandblasting cleaning of coatings - modern and relatively inexpensive way Add individual style and attractive appearance to wood.

Sandblasting and its fundamental advantages

Sandblasting is the application of wood, metal, or concrete covering abrasive materials under high pressure. Unlike traditional methods grinding, the sandblasting machine acts pointwise and does not leave obvious traces of mechanical impact. This method is used for the following purposes:

1. To prepare wood for painting. Wood material tends to deteriorate. And if you apply it to unprepared raw materials varnish coating, it will quickly become covered with cracks and lose its attractive appearance. A specialist, using a sandblasting machine, removes the minimum layer of wood damaged by moisture and air, ensuring maximum adhesion of the paint or varnish to the base.
2. For restoration of old wood. When a tree suffers from moisture and air for a long time, upper layer loses its density and begins to rot. A sandblasting machine knocks out the soft parts of rotten wood, renewing the material. Moreover, the Moscow company Ecoblasting carries out restoration of wood even after a fire. The company makes a discount for disaster victims and sands the coating using the soda blasting method, which leaves no marks and is environmentally friendly.
3. For stylizing wood in an antique style. This method called "brushing". It is used when you need to emphasize the texture of wood and create the appearance of rough processing.

Advantages of deep sandblasting in wood brushing

You don't always want wood to look like new. Often, on the contrary, the material needs to be artificially “aged” to give it a unique look. In this case, use either grinding machine with an abrasive disc or sandblasting. The abrasive disc leaves deep grooves when grinding. The wood looks more scratched than old. In addition, deep marks are difficult to impregnate with protective compounds. This means that the durability of such wood decreases.

Deep sandblasting works in the opposite way. The machine precisely cuts out softer layers from the coating, doing in a matter of minutes what nature already does during the natural aging of wood. Therefore, such wood looks more “natural” than its disc-sanded counterparts.

Equipment and required qualifications

The sandblasting method includes a whole list of machines for working at different stages of processing. In particular, the Ecoblasting company uses a Contractor DBS-200 sandblasting machine for the main processing, but when it comes to restoration work, or preparation for painting, the soda blasting method is used, which provides more high-quality cleaning surfaces.

Why is it important to order turnkey services from specialists?

• accompanied by a lot of noise and large amounts of dust;
• requires the involvement of highly qualified specialists;
• needs a whole range of equipment;
• leaves behind a large number of construction waste.

Conscientious contractors minimize risks by ensuring high-quality processing and the result. Specialists from Ecoblasting clean wood with average speed 1 m2 per minute, which means all the work will take no more than a few hours. After processing, construction garbage quickly removed, because the technology does not use toxic and highly dispersed substances.

The specialized company "PESKOSTRUY.RU" offers its clients services for decorative sandblasting various surfaces. Artificially aged wood or sandblasted brick, natural and fake diamond will allow you to create an atmosphere of cozy antiquity without spending a lot of effort.

Sandblasting materials

In the last few years, a fashionable trend in interior design has been the use of artificially aged brick. This effect is applicable when creating a loft, something like an ancient castle, a “village” house in the “Provence” style - in a word, wherever natural, practically unfinished surfaces are required.

Sandblasting brickwork allows you to achieve aged effect very quickly - be it a façade or interior spaces building. After this treatment, the brick is cleared of contaminants and acquires a “worn out” appearance, and in addition becomes a warmer, richer color.

Artificial aging of wood

Widely used to improve the decorative qualities of this material.

Sandblasting acts in the same way as natural factors (water, wind, temperature fluctuations), revealing texture natural wood. Only this happens in hours, not decades.

And if wood panels Previously, it was customary to decorate mainly serious administrative buildings, but today this warm natural material is increasingly used in the decoration of bars, restaurants, clubs, hotels, and offices. The living warmth radiated by the tree, unique drawing and the aroma bring to these rooms a touch of luxury and nobility, which our ancestors valued so much.

Sandblasting wood allows you to process large areas surfaces of facades, wall and ceiling panels, wooden beams and other complex architectural elements. Moreover, unlike brushing(obtaining a textured wooden surface using metal brushes) sandblasting can significantly reduce the processing time of wood.

But the use of sandblasting technology is not limited to aging wood- it helps to perform the removal old paint from wood during repair, process wooden facades before application protective compounds, degrease treated surfaces for maximum adhesion to paints and varnishes.

The company "PESKOSTRUY.RU" has the necessary equipment for decorative sandblasting various materials. Reasonable prices, high quality work and as soon as possible fulfilling orders are our principles when working with any client.

So that the tree becomes aesthetically pleasing appearance, it was with the effect of antiquity or to give freshness to the material, high-quality is used. This method is based on the fact that small sand particles, thanks to a special technique, interact with the treated surfaces under enormous pressure. The result is quite clean area, which is completely cleared of old surface, heavy pollution, paint parts. The wood becomes smooth, acquires a grinding effect, and small roughnesses on it are removed.

Why is sandblasting on wood necessary?

Made from reliable wood, it is used when thorough cleaning of the surface is necessary and to achieve results. artificial aging. Interior stylistic directions“antique” finishes are mainly achieved through the sandblasting technique for processing wood furniture. This method is also used for exteriors and facades. This technique requires a responsible approach and high-quality technology, and if all conditions are met, it is possible to carry out high-quality work, where all conditions will be met and the result will certainly be an excellent effect with exquisite decor.

For these purposes, modern imported professional equipment is purchased. Such work should only be performed by highly qualified craftsmen who can comply with all necessary important elements. If you trust this work proven team, then you will be surprised high quality work combined with low prices.

Sandblasting has been widely used to remove any blackening on wood - this may be mold that corrodes the wood, negatively affecting human health. Black mold can float in the air and enter the lungs. Due to such polluted air, it is possible bad influence to your health. Long-term exposure to mold in large doses can cause bronchial diseases, pneumonia and asthma.

Sandblasting wood It can perfectly eliminate the deepest mold spores and can perfectly renew any surfaces, they become cleaner and fresher. This processing method can greatly increase the service life and extend the wear resistance of materials, which are less susceptible to a variety of negative external factors. Then another procedure is carried out - the wood is impregnated with a special protective mixture to preserve it from possible infection.

Advantages of sandblasting

The sandblasting method of grinding, compared with other methods, can act in a targeted manner, which can eliminate the possibility of mechanical damage. This characteristic is considered relevant only for wood, since it is considered a rather finicky material.

You can reliably and delicately remove the existing paintwork in order to then apply a new coat. In addition, it is used for restoration purposes to process old wood when it is damaged by any unfavorable condition - be it wind, or rain, or the rays of the sun. Influenced external factors Wood products can deteriorate and need to be renewed from time to time. Sandblasting equipment is used here.

Deep sandblasting allows you to achieve an “antique” effect; the process is called “brushing”. The wood is heterogeneous and is based on softer and harder layers. When using sandblasting equipment on wood, the top layer is unevenly removed when the hard cut is in place, but the soft cut can be removed point by point. Similar type finishing allows you to artificially age the product and it will acquire a natural appearance.

Will give you the opportunity to clean your apartment and update renovation work and you can get an excellent room design at affordable prices: use the services of our company.

Prices

Sandblasting cost depends on many factors, the lowest price for this service is 180 rubles/m2. But the prices are always indicative, because any order is carried out individually. You need to use the services of masters - they use professional equipment. The craftsmen do not use toxic or highly dispersed components in their work, that is this method will be completely safe and environmentally friendly.

A completely different appearance of your favorite wood product - that’s what you need sandblasting, price which is always available when contacting our company. Despite the goals that are set for you - brushing, or removing stains from the area, or paint coating– you will certainly get a good mood and a positive result.

Our company successfully provides the service of sandblasting wood. We are always guaranteed to get a good result and we take each stage of work responsibly. To order this service, you need to contact the company’s specialists. All types of work are carried out only professional craftsmen, who have many years of experience in this field and relevant knowledge and skills. On Various types work is guaranteed.

Most people do not know that the reliability of the coating depends not only on the quality of the existing surface, but also on the materials used to care for the surface of metal structures. Unlike manual cleaning of products, sandpaper, machine blasting, etc., sandblasting with abrasive materials makes it possible to process very complex and hard-to-reach areas.

Why is metal sandblasting necessary?

To prepare metal products for further protection from the influence of environmental factors, such as priming, painting, and anti-corrosion protection different materials, depending on the scope of use of products and structures, sandblasting of metal products in Moscow or the Moscow region is important.

What kind of miracle happens after sandblasting wooden surfaces?

One of the activities of our organization is sandblasting wood. It is necessary to preserve the appearance of wood and wooden structures. Without special treatment, exterior and interior items made of wood quickly lose their attractive appearance and become dilapidated. Another problem is the use of low-quality painting materials. In this case, the wood quickly becomes dull.

Sandblasting allows you to make almost any wood product look marketable. This treatment removes the dull layer without harming the product itself. After sandblasting, an effect appears comparable to that produced by surface grinding. In order to give your home, gazebo, or other wooden product original appearance, sandblasting of structures is required. It is very important that after such a procedure it is necessary to protect the structure from exposure to any natural phenomena, as well as from the influence environment by treating them with high quality protective materials.

What happens when treating a brick or concrete surface?

We receive the bulk of requests for sandblasting of brick and concrete surfaces, removal of stubborn “graffiti” paint and other contaminants on buildings and indoors. Sandblasting a room is a rather unpleasant process, one of the factors of which is poor ventilation in the premises, as well as the need for additional costs for the delivery of the necessary equipment and consumables. We achieve the greatest results in successfully ridding bricks of foreign traces of contamination by using an air-abrasive mixture , and also, in turn, competent selection of the sand or cooper slag fraction.

Is cleaning required after sandblasting?

Before signing a contract with the customer for sandblasting, we discuss in advance the cleaning of the room, in connection with what it wears individual character. Since in most of the work we carry out we try to use quartz sand a certain faction, which is natural material and environmentally friendly, so there is not always a need to clean up the used material. For example, the area of ​​public gardens or forests where sandblasting work is carried out does not require thorough cleaning wrought iron fence, due to the fact that the material falls to the ground, and with precipitation it will eventually go into the soil. Undoubtedly, additional cleaning is necessary after work has been carried out at sites in in public places or inside the building, we conscientiously collect and remove all generated waste for an additional fee.

A great way to decorate various materials.
Prices for sandblasting are indicated.

Stone and brick

Decorative processing of brick and stone sandblasting is used when design tasks require unfinished “natural” surfaces (for example, when renovating in the LOFT style).

Brick is aged using sandblasting. Brickwork processing gives the surface a neatly worn look by creating a rough texture. As a result, the brick acquires a purer, richer shade and appears velvety to the touch.

After decorative stone processing using sandblasting, the relief and color of the stone surface becomes better visible

Tree

With the results of wood brushing work performed
can be found on the pages of our PORTFOLIO.

Metal

Metal deservedly takes its rightful place among the methods of preparing for the application of decorative and protective coatings. Sandblasting removes almost any dirt and traces of corrosion and degreases the metal surface.

During sandblasting, solid particles leave behind a certain microrelief, which performs a decorative function and increases the adhesion of metal to paints and varnishes.

Some structural alloys (such as aluminum) are not susceptible to corrosion. However, the glossy surface of such metals looks unattractive. After sandblasting, the surface becomes matte, looks clean and smooth and has a slight diffused “shine”.