Ultra-thin thermal insulation of the armor brand. Thermal insulation Bronya - a new ultra-thin liquid insulation Applying thermal insulation Bronya
Ultra-thin thermal insulation is supplied in the following containers:
Modification "Armor Facade" has a flammability group "G1". If you require a material with a flammability group "NG", then we bring to your attention a similar modification "Armor Facade NG"
Liquid ceramic thermal insulation coating "Bronya Facade" / "Bronya Facade NG", with high-quality vapor permeability facade paint, specially designed For thermal insulation plastered, concrete, brick, wooden and others surfaces enclosing structures of buildings and structures with external and internal works , but is also used on surfaces that do not require increased vapor permeability (metal, plastic, etc.).
The material is highly effective in eliminating freezing, condensation, fungal formations, etc. It protects the enclosing structures of buildings and structures from heat loss without disturbing the moisture and air exchange of the room with the environment.
Liquid thermal insulation material "Bronya Facade" / "Bronya Facade NG" can be insulated building's facade(including complex architectural solutions); freezing or just cold walls How outside, so inside building; balcony or loggia, saving them usable area(especially effective when insulating a loggia to combine with a living space); concrete floors; floor(can be used under infrared heated floors); ceiling; slopes for elimination condensate on plastic windows.
Coating "Bronya Facade" / "Bronya Facade NG", applied to the wall with outside, V winter time capable reduce heating costs buildings up to 30%, and in summer reflects up to 80% of the visible solar and infrared spectrum of radiation, which significantly reduces heating interior spaces and correspondingly reduces the cost of their conditioning.
This modification has increased vapor permeability, so you can apply it in a layer up to 1 mm thick per day. For example, in order to obtain a thermal insulation coating "Bronya Facade" / "Bronya Facade NG" with a total thickness of 2 mm, it is necessary to apply 2 layers of 1 mm thickness with interlayer drying for 24 hours, thereby saving time and reducing the cost of work. Apply liquid thermal insulation "Bronya Facade" / "Bronya Facade NG" Can paint brush , spatula, or apparatus airless spray "Graco".
Laboratory consumption liquid thermal insulation "Armor" amounts to 1 liter per 1 sq.m. heat-insulated surface at layer thickness 1 mm. When applying liquid thermal insulation to a surface with an area of more than 100 sq.m, it is recommended to allow for an overconsumption of 10% if the application is planned to be done with a brush or spatula. From 10% to 30% (Depending on the professionalism of the painter and weather conditions), material consumption may increase when applied with an airless sprayer.
ATTENTION! Plaster and putty wall over thermal insulation coating "Bronya Facade" / "Bronya Facade NG" Not recommended so as not to deteriorate the thermophysical properties of the material! Liquid thermal insulation "Bronya Facade" / "Bronya Facade NG" must be applied to the wall surface finishing layer . Thermal insulation coating "Bronya Facade" / "Bronya Facade NG" The factory produces it only in white. To give the thermally insulated wall surface an aesthetic appearance, it can be painted acrylic paint on a water-dispersion basis, or wallpaper. It is also possible self-tinting thermal insulation material "Bronya Facade" / "Bronya Facade NG" V desired color immediately before applying it to the heat-insulating surface. If on top of the thermal insulation coating "Bronya Facade" / "Bronya Facade NG" planned lay down ceramic tiles or porcelain stoneware, then as protective layer coating recommended "Bronya Facade" / "Bronya Facade NG" one layer of heat-insulating putty, 1 mm thick.
Application work thermal insulation coating "Bronya Facade" / "Bronya Facade NG" It is recommended to carry out at an ambient temperature of at least +5°C and a temperature of the heat-insulated surface from +7°C to + 120°C. (The first layers are applied to surfaces with temperatures above +60°C using material diluted with water in a ratio of 50% to 50%)
After the material has completely dried and polymerized, the resulting thermal insulation coating can be used at temperatures from -60°C to +120°C.
Based on modification "Armor Facade" produced using only imported raw materials, a budget modification is made "Armor Wall". Budget modifications are similar in their thermal properties to modifications "Armor Facade", but has peak limitation maximum temperature operation +80°С.
Instructions for using the material can be found in the section
When insulating building facades, various kinds coolants, iron containers and structures, and other structures, special substances are used, which are materials that conduct thermal energy rather poorly. Perhaps the most popular insulation of this kind is Bronya thermal insulation. This material characterized by its unique composition, which allows it to prevent heat loss even with a layer of 1 mm. Typically, Armor is used in almost all construction activities where protection from low temperatures is required.
Like most similar thermo insulating materials, Armor is a pasty substance white. It should be applied with a spatula or any other suitable tool to the surface. When the material hardens (usually it takes no more than 1 day), a solid is formed. protective layer. It is worth noting that the thickness of the applied layer here depends on what effect is required, although it is often no more than 6 millimeters. The fact is that further expansion no longer entails an increase in quality.
Prices and types of thermal insulation Bronya
The material described can be of four types. The choice of one or the other depends on your specific needs, as well as what is most suitable for your operating environment. Let's get acquainted with each type of heat-insulating paint, consider their characteristics and prices.
"Facade"
The best option, used primarily for external insulation objects. It is applied to the surface in a layer of 1 millimeter, which significantly reduces the time spent on carrying out installation work, for elements under open air. This material is also characterized by having a high vapor permeability rate.
The approximate cost of 1 liter of material is 390-410 rubles.
"Bronya Classic"
The latest thermal insulation Bronya, which is also universal. The paint can be used on almost any surface that requires thermal insulation. Available in plastic buckets with a capacity of 5-20 liters. Typically, all types of Armor are produced in such buckets (with the exception of “Winter”).
Average market value starts from 390 rubles.
"Winter"
This is a unique thermal insulation coating that can be applied even at sub-zero temperature surface to be treated (but not below -35 degrees). Thanks to these characteristics, the paint can be used in winter, and outdoors; The paint itself dries perfectly after application, and crystallization does not occur. This type of Armor has received extremely positive reviews. Available in plastic buckets of 10 and 20 liters.
On average, one liter of paint costs about 440 rubles.
"Antikor"
The last type of material being considered today is also a liquid insulating paint. The main advantage of the material is that it can be applied not only to specially prepared/cleaned surfaces, but also directly to a roughly cleaned rusty surface. If desired, this option can be combined with Classic Armor.
Average market value of "Antikor" equal to 430 rubles.
Thermal insulation for water supply and heating pipes
Previously, we talked about how to choose insulating material for pipes and what to do if the pipeline is frozen; in addition to this article, we advise you to read this information
Liquid thermal insulation – what is it?
As is known, most of the scientific developments widely used today in Everyday life, came to us from the space or military industry. And liquid thermal insulation material(which is the described Armor) is no exception, since at first it was used to isolate spaceships.
Any spaceship– this is, first of all, a high-precision system, therefore, to spacecraft are moving forward special requirements, among which:
- strength, low weight;
- ability to withstand low temperatures with minimal heat loss;
- resistance to various aggressive environments, corrosion, etc.
And all this, obviously, can be achieved by using liquid thermal insulation. But what is she? In essence, liquid thermal insulation is a polymer composition of liquid consistency, which consists of rubber and acrylic based binders, fixatives, catalysts, ultra-thin microspheres of ceramic origin and anti-corrosion additives.
The substance is applied in the same way as ordinary paint (with a layer of 1-6 millimeters, as noted above) on any surface. In liquid form, the heat insulator also resembles paint, but after drying it turns into a durable and at the same time plastic polymer coating, much like film.
Note! Thermal insulation should be applied in several layers. As for operating conditions, the hardened polymer layer can be used at almost any temperature.
If we talk specifically about construction and energy, here Bronya thermal insulation can provide:
Based on everything said above, we can conclude that the scope of application of this insulating material is almost limitless.
Note! It is worth adding a few words about the excellent adhesion of thermal insulation to most of the materials used today. Thus, some types of coating are so resistant to rust that they can be applied directly to it (but in this case, considerable wet peeling must be removed, for which you can use a regular spatula). There is also water in the mixture and it should be added when the mixture has thickened somewhat from long-term storage.
Where is Armor used?
Due to its special characteristics, this heat insulator is used universally in various repair and construction sites; and it’s not surprising, because the armor can easily withstand temperatures of both -60 degrees and +280 degrees. If you believe numerous reviews, then houses treated with Bronya thermal insulation gain high-quality protection from humidity and cold. With the help of Armor, you can even eliminate sources of heat loss in tanks and heating lines. In addition, this heat insulator can be used to insulate internal partitions And roofing structures, decorate the walls of new premises.
It is also worth noting that when compared with other materials for similar purposes, Bronya thermal insulation has significant advantages, including:
- long service life (may exceed fifteen years);
- the minimum number of tools required to apply the material;
- high rate of adhesion, that is, adhesion to the surface;
- the minimum thickness of the formed layer (this is no more than 6 millimeters);
- Finally, the last advantage is that the heat insulator can be applied to almost all surfaces.
Note! The above-mentioned consumption of Armor (meaning 1 liter per 1 sq.m., provided that the layer thickness is 1 millimeter) is an indicator calculated in laboratory conditions. In reality, this indicator may change; it all depends on the specific conditions of use (for example, if the surface is uneven, then the consumption will definitely increase).
Now let's find out more specific examples applications of liquid thermal insulation found in everyday life. So, as noted above, Armor can be used to insulate walls, roofs and windows, not only from the inside, but also from the outside. What is characteristic is that the surfaces themselves remain “breathable” after treatment. Thermal insulation is also used in pipelines (not only for hot, but also for cold water), V heating equipment heating stations - both domestic and industrial.
In addition, Armor is effectively used to protect against negative effects external factors environment. This point should be considered in more detail.
- The substance can be used as hydro- and thermal insulation under concrete screed.
- It can also be used as a protective layer for open-air structures and external wall surfaces.
- Finally, Armor is often used as insulation for metal structures buildings, due to which the possibility of condensation forming on them is reduced to zero.
Video – Thermal insulation “Armor”. Experimenting with ice
How to apply thermal insulation paint yourself
As noted above, Bronya thermal insulation can be applied using a sprayer or a regular brush. During the first pass, a protective layer 1 millimeter thick is laid on the treated surface. This is explained not only by the fact that the most rational consumption of the substance will be ensured, but also by the fact that various kinds of layers will not appear.
Note! On average, the operating temperature range ranges from -35 degrees to +150 degrees, although a more specific figure depends on what type of Armor you are using.
Immediately before use, the material is mixed directly in a plastic bucket. In order to achieve the required consistency, a small amount of distilled water is added (this is indicated in the manufacturer's instructions).
Video - Applying liquid thermal insulation Bronya
As a conclusion. The effect of the material from the point of view of thermal physics
First, we should talk about the fact that thermal energy can be transmitted in three ways.
- Convection is when heat is transferred with a liquid, gas or granular medium due to the flow of the material itself.
- Thermal conduction is when energy is transferred in a solid due to atomic and molecular kinetic energy to a cooler part of the object.
- Thermal radiant radiation or, more simply, electromagnetic radiation. This radiation is emitted by the substance itself through its internal energy.
Thanks to the action of these laws, thermal equilibrium is ensured along the entire perimeter of the thermal system. And the quality insulation material in this case, it is determined by how and how effectively this equilibrium is blocked. Thermal insulation Armor is characterized by a complex multi-level structure, where each method of heat transfer is minimized.
Armor is a liquid heat-insulating paint Russian manufacturer, consisting of acrylic polymers, ceramic microspheres, fire retardants, fixatives, catalysts and other additives. Thanks to its microporous structure, it covers the surface of any shape and material with a thin and dense layer of 1 mm. As a result, the insulation does not create increased load on the structure. Bronya liquid insulation can be used both outside and indoors, since all its components are absolutely safe. All products in this series have numerous quality certificates and guarantees.
According to purpose, it is divided into the following types:
- Classic (universal);
- Facade;
- Anticorrosive;
- Winter;
- Fire protection.
1. Classic.
Classic paint is used for application to coatings made of various materials(plastic, metal). Lightweight, stretches well, matte color, lays on the surface in an even film layer with a white tint. Most often, Bronya Classic liquid insulation is used for cooling and heating systems, walls, roofs, floors, containers (containers, tanks), trailers, water supply pipes, steam pipelines. Does not support combustion (charring occurs at +260°C), does not emit hazardous substances, is resistant to constant temperature changes, corrosion, precipitation and mechanical stress, and also impermeable to air and moisture. Lifespan of paint on metal or concrete surfaces can reach 15 years, and can withstand temperatures from +200 to -60°C.
Facade – provides an ultra-thin coating of thermal insulation, and also has the following properties:
- low thermal conductivity coefficient (0.0012 W/m°C);
- excellent waterproofing and adhesion to the surface;
- high density;
- vapor permeable;
- does not absorb water;
- viscous, uniform color;
- prevents condensation, mold and mildew growth;
- does not slip and is quickly applied.
Used for walls both inside and outside, windows, balconies, slopes, attics, facades and much more. The manufacturer recommends using Bronya Facade paint for surfaces made of brick, wood, and concrete. For a warming effect, 1 layer 1 mm thick is sufficient.
3. Anticorrosive, Winter and Fire protection.
The main purpose of ultra-thin thermal insulation Anticor Bronya is to protect the metal surface from corrosion. Moreover, you can apply it directly over the rust, the main thing is to remove all flaking parts (with a spatula, brush). The characteristics of Anticorrosive allow it to be used in places exposed to aggressive influences, for example, acids, alkalis, salts and the like. The surface coated with heat-insulating paint Armor against corrosion is not destroyed under the influence of ultraviolet rays. It is allowed to use insulation at temperatures from +150 to -60°C. Classic is often applied on top of it to reduce consumption.
The Bronya Winter series paint is designed specifically for use in cold conditions. So, specifications thermal insulation allows it to be applied at a temperature of -35°C in the open air, unlike products from other series - only above +7°C. It is used for construction, reconstruction of buildings, fences, concrete and metal surfaces. Bronya Zima insulation does not allow water to pass through and is resistant to alkali. Fireproofing is a liquid insulating paint designed to increase the fire resistance of steel structures. Without ultra-thin thermal insulation, the time limit of fire resistance does not exceed 45 minutes, and with it it reaches 120.
Overview of the benefits of Fire Protection paint:
- low consumption;
- easy and quick installation;
- service life up to 30 years;
- can be used together with other insulations of the Bronya series.
Before coating any surface, you must thoroughly clean it of dirt, oil stains, fill up potholes and cracks, and then wait until it dries completely. All this will significantly increase the adhesion of Bronya thermal insulation to the material. The paint is applied using a roller, brush or airless spray. The average drying time is 24 hours. It is recommended to apply a layer of no more than 6 mm, since a larger amount will not affect the thermal insulation properties. Water is added to the suspension only in extreme cases, for example, during long-term storage.
Average consumption is 1 liter of Bronya insulation per 1 m2 (with a layer 1 mm thick). The amount of insulation required will vary depending on the surface being painted and the required application density. Judging by the reviews of experts, it is always better to calculate with a reserve, for example, for metal, increase consumption by 5%, concrete - 10%. The temperature of the material to be coated must be in the range from +150 to -35°C. Before use, the thermal insulation should be thoroughly mixed to the same consistency. It is recommended to store only in a hermetically sealed container in a dark room from +40 to -40°C. Transportation is permitted in any way.
User reviews
“We decided to purchase liquid thermal insulation from Bronya after we got acquainted with its characteristics. At first I didn’t really believe that it was possible to achieve a good insulation effect with such a small layer, and the price alarmed me. Used thermal insulation for the roof country house. It is applied easily and quickly, and what’s even better is that you don’t need to have any special skills in this work. Now we can say for sure that the attic and the house have become noticeably warmer, after this all doubts were immediately dispelled and we don’t regret the money spent.”
Oleg Podvarsky, St. Petersburg.
“I was looking for insulation for a balcony and came across this insulation. I was surprised excellent characteristics Broni, so I decided that it was better to first look for reviews about it. I found only positive ones, never caught any negative ones. I immediately decided that it was best to buy this particular thermal insulation. I painted it entirely myself, and it turned out quite quickly. A year later, the thermal insulation still looks like new, and it’s always warm on the balcony. Overall, I’m very pleased with the result.”
Alexander Kotov, Rostov-on-Don.
“Insulated with Armor small office. Thermal insulation was applied in a layer of 1 mm. As a result, all dampness and mold on the walls completely disappeared. After everything had dried, we hung the wallpaper. All work went easily and without problems, and what is important, the space of the room was not reduced at all in comparison with insulation with slabs or rolls. In addition, the paint is fireproof and non-toxic.”
Andrey, Volgograd.
“I was recommended to buy liquid thermal insulation from this company by my work colleagues, and I had heard positive reviews about it before. I covered the pipes in the boiler room with a layer of three millimeters, it took quite a lot of paint, but they are cold all the time, and now practically no heat is lost.”
Kirill, Moscow.
Price
Liquid thermal insulation price table:
| Name | Volume, l | Price, rubles |
| Winter | 10 | 4800 |
| 20 | 9600 | |
| Classic | 5 | 2000 |
| 10 | 4000 | |
| 20 | 7900 | |
| Facade | 5 | 2200 |
| 10 | 4300 | |
| 20 | 8600 | |
| Anticorrosive | 5 | 2400 |
| 10 | 4700 | |
| 20 | 9400 | |
| Fire protection (volume in kg) | 6 | 2700 |
| 14 | 6300 | |
| 25 | 11300 |
Another important advantage Armor means that, thanks to a thin layer, you can easily replace a damaged part of the structure, unlike roll or tile insulation, the dismantling and restoration of which will take a lot of time, effort and money. In addition to all this, rodents are not interested in it and there is no need to necessarily lay a finishing coating on top of it. The heat loss of any building and, accordingly, its heating costs are significantly reduced. In addition, due to the uniform and continuous layer of thermal insulation of the Armor, the possibility of the appearance of cold bridges and moisture penetration under it is completely eliminated.
- revolutionary insulation technology! Ultra-thin thermal insulation, which has no analogues in terms of thermal protection efficiency!
Thermal insulating paint Bronya
can change our understanding of traditional ways and technologies for home insulation, thermal insulation of pipes and engineering equipment.Modern developments in the field of increasing the efficiency of thermal insulation materials have allowed scientists to create a truly universal thermal insulation coating that surpasses all known insulating materials in its characteristics!
Judge for yourself - just 1 mm of Bronya thermal insulation coating is equivalent in thermal protection to 50 mm of mineral wool!
40 times more effective than polystyrene foam or polyurethane foam, but that's not all the benefits of liquid thermal insulation.
Advantages of liquid thermal insulation Bronya:
- environmental safety, absence of harmful impurities in the composition of the material
- Fire safety, absence of harmful fumes and gases when heating the insulating material
- high efficiency of thermal protection with a small thickness of insulation
- durability, not susceptible to rotting and getting wet
- biological stability, not susceptible to mold damage
- ease of application on any type of surface
- low cost
Ultra-thin thermal insulation coating Bronya is the ideal insulation of the new generation!
In the philistine environment, and among the builders themselves, there are enough a large number of skeptics who claim that liquid ultra-thin thermal insulation is a figment of the imagination of marketers. From the point of view of such “experts,” a thermal insulation material with such efficiency indicators cannot exist in principle. Such skeptics should be reminded that just recently no one could believe that a person could fly into space, but it happened! Exactly the same revolutionary, breakthrough technologies are being developed in all areas human activity, including in the creation of new insulating materials, such as liquid insulation.
Ultra-thin thermal insulation Bronya has proven its high efficiency not only in experiments and numerous tests in laboratory tests, when obtaining certificates from leading institutes of the country, but also in practice, with practical use on hundreds of critical construction sites.Liquid thermal insulation Bronya is successfully used at the facilities of such giants as GAZPROM, RZD, ROSNEFT, LUKOIL, as well as in housing construction, housing and communal services, industrial facilities, etc. Gaining increasing popularity liquid insulation Armor among private developers.
Those who have ever used Bronya heat-insulating paint recommend it to all their friends as a unique heat insulator!
Liquid insulation
highly effective for thermal insulation of building facades, roofs, interior walls, window slopes, concrete floors, hot and cold water supply pipelines, steam pipelines, air ducts for air conditioning systems, cooling systems, various containers, tanks, trailers, refrigerators, etc.
Technical characteristics of liquid thermal insulation Bronya:
. Coefficient of thermal conductivity
- 0.001 W/m °C (at +20 °C)!
. Temperature range of application
from -60 to +250 °C
. Environmentally safe, non-toxic, do not contain harmful volatiles organic compounds.
. High chemical resistance to alkalis, saline solutions etc.
. Fire and explosion safety
.
Service life - more than 30 years
, without changing the insulating properties!
Areas of application of Bronya liquid thermal insulation:
- Insulation of walls, floors and roofs of residential and industrial buildings
- Thermal insulation of metal structures and structures
- Insulation of hangars, warehouses and garages
- Thermal insulation of heating system pipelines
- Thermal insulation of steam and gas pipelines
- Thermal insulation of air conditioning systems
- Elimination of condensate on pipes with cold water
- Thermal insulation of water heaters and boilers
- Thermal insulation of steam boilers and heat exchangers
- Insulation of oil pipelines - underground and above-ground, oil storage facilities
- Thermal insulation of containers and tanks for storing water, chemicals, etc.
- Thermal insulation of refrigeration chambers
- Thermal insulation of refrigerators, automobile and railway tanks
- Passenger railway cars and metro cars (heat and sound insulation)
- Engine rooms of ships
- Internal surfaces of ship hulls, submarines, boats, yachts, etc.
Assortment of thermal insulation coatings Bronya:
1. Ultra-thin thermal insulation Armor Standard - basic modification of ultra-thin thermal insulation coatings Bronya - the most economical option for insulation of any building structures!
- 2. Thermal insulation paint Armor Classic- a basic modification of an ultra-thin liquid-ceramic coating with excellent adhesion to any surface! The best ultra-thin insulation you've ever worked with!
3.
Insulation coating
Armor Anticor- a unique ultra-thin thermal insulation coating, insulation paint, which can be applied directly to a rusty surface (just remove wire brush loose rust).
Liquid thermal insulation Bronya Anticor is a highly effective thermal insulation coating and anti-corrosion protection at the same time!
4. Thermal insulation paint Armor Winter - a modification that has no analogues, specially designed for work in winter period at negative temperatures. Unlike all other liquids ceramic coatings presented on Russian market, work on applying Bronya Winter can be carried out at sub-zero temperatures, up to -30 °C.
5.
Thermal insulation paint
Armor Facade -
a unique thermal insulation coating that can be applied in layers up to 1 mm thick at a time, and has increased vapor permeability of high-quality facade coatings.
- 6.
Thermal insulation putty
Armor Light -
innovative heat-insulating coating, heat-insulating putty for construction and finishing works, intended for final leveling internal and external surfaces made of concrete, brick, cement-lime plasters, gypsum blocks and slabs, gas and foam concrete, gypsum board, gypsum fiber board, etc. , with operating temperatures from -60 to +150 °C.
Thermal insulating putty Bronya Light is a unique construction material, which is based on the use of the latest thermal insulation components.
7. Fire retardant composition Armor Fire Protection - one-component fire retardant coating designed to increase fire resistance steel structures and buildings for industrial and civil purposes. Fire protection of metal structures can now be done reliably and very simply - by simply painting the surface! The fire resistance of structures increases from 45 minutes to 120 minutes! Fire-retardant paint Bronya Fire protection is the latest development in the field modern methods fire protection of structures.
8.Thermal insulation coating Armor Universal and Armor Universal NG - Armor Classic And Armor Standard.
The development of this modification of liquid thermal insulation was caused by the need to offer a cheaper alternative to the already widely known and in demand Bronya Classic coatings. As a result, it was possible to obtain a thermal insulation coating with similar heat-shielding properties, but significantly more economical in cost -20% cheaper!
9.Thermal insulation coating Armor Wall and Armor Wall NG - This is a budget ultra-thin thermal insulation that has similar characteristics to ultra-thin thermal insulation coatings Armor Facade.
A cheaper alternative to the already widely known and in demand Bronya Facade coatings. Our technologists managed to obtain a thermal insulation coating not only with similar heat-shielding properties, but also significantly more economical in cost -20% cheaper!
10.Ultra-thin thermal insulation Armor Nord and Armor Nord NG - this is a budget ultra-thin thermal insulation that has similar characteristics to a thermal insulation coating Armor Winter.
A cheaper alternative to already widely known and in demand coatings Armor Winter. Thanks to new technology and innovative components, it was possible to obtain a thermal insulation coating not only with similar heat-shielding properties, but also significantly more economical in cost -20% cheaper!
11.Insulation coating Armor Metal - This is a budget ultra-thin thermal insulation that has similar technical characteristics to the modificationArmor Anticor.
The development of this modification of liquid thermal insulation was caused by the need to offer a cheaper alternative to the already widely known and in demand Bronya Anticorrosive coatings. As a result, it was possible to obtain a thermal insulation coating with similar heat-protective and anti-corrosion properties, but significantly more economical in cost -20% cheaper!
12.Insulation coatingArmor Anti-condensation
PRO-
Apply directly to the condensing surface!
Other news
Anti-condensation insulating coating Bronya Anti-condensate is designed specifically for use in construction, industry, reconstruction and repair of equipment. The uniqueness of the anti-condensation coating is that it is applied directly to wet surfaces of pipelines and equipment various shapes in working condition, if it is impossible to stop technological process, or supplying liquids through pipelines.
read
Technologies for energy saving and thermal insulation of residential and industrial buildings are rapidly developing, new materials are constantly appearing, which are very different in their mechanism of action from the heat insulators that were used before.
One of these materials is liquid thermal insulation armor, or, as it is also called, thermal paint. In this article we will look at the most popular brands of liquid thermal insulation: “Bronya”, “Izollat”, “Astratek”, their characteristics and scope of application.
Liquid thermal insulation - what is it?
Warm paint is newest material, with the help of which a very thin thermal insulation layer is created on the insulated surface. Liquid thermal insulation has truly unique qualities, thanks to which it is possible to achieve a noticeable effect in saving heat with a layer of insulation 1 millimeter thick. Like many of the latest developments, thermal paint is a product of the space industry. Having proven itself well in this industry, liquid thermal insulation has begun to be actively used in construction.
Liquid thermal insulation is applied using a brush, roller, or airless spraying. After the material has completely polymerized, a layer of thermal insulation is formed on the insulated surface, which has excellent energy-saving characteristics. The coating works as a “thermal mirror”, thus ensuring heat retention inside the room.
Thermal paint consists of the following components:
Filler. It is a mixture of ceramic, glass and polymer balls, invisible to the naked eye. The inside of the balls is filled with air.
Binder. Made from latex or acrylic.
Supplements The composition of the additives depends on where exactly the thermal paint is intended to be used.
The composition of the thermal paint directly determines its properties, as well as the requirements for the insulated surface and, accordingly, the method of applying the material. Therefore, in order to get the desired result, before purchasing a thermal paint, you need to pay attention to its composition and scope of application.
How does liquid thermal insulation work?
Warmth, as everyone knows from school course physics, is transmitted in three ways:
- Thermal conductivity. Thermal energy transmitted from a warm object to a cold one. Thermal paint contains only 20 percent of components that can conduct heat.
- Convection. Heat is transferred by the substance itself. Thanks to most The masses of liquid thermal insulation are balls, convection losses are negligible.
- Radiation. Heat is transferred due to internal energy heated substance. Thanks to the same hollow balls, the thermal paint reflects and dissipates heat. Almost 90% of thermal energy is reflected and remains in the room. The principle is somewhat similar to how a thermos works.
Liquid thermal insulation for facades
Facade thermal paint can be used for insulation of both domestic and industrial facilities. The most popular brands of facade liquid thermal insulation: “Astratek”, “Isollat”, “Bronya Classic”, “Bronya Facade” - are also used for insulating wooden buildings.
Isollat brand insulation contains special substances that provide the surface with a self-cleaning effect - rain washes away all dirt and dust from the surface.
Purposes of facade thermal insulation:
Reducing heat loss through the facade to a minimum, saving on air conditioning during the warm period.
Insulation of internal walls.
Insulation of balconies, loggias.
Insulation of floors and basements.
Applying thermal paint to the internal and external walls of a building helps not only to conserve heat and save on heating costs, but also prevents the appearance of fungus, mold, condensation and icing of the walls.
For buildings that require additional protection from fire, there are special modifications of thermal paints with a flammability class of “NG”: “Armor fire protection”, “Akterm Fireproof”, “Korund Vulcan”, “Akterm NG”.
Before applying liquid thermal insulation, the surface must be properly prepared, otherwise the consumption of liquid thermal insulation will increase and adhesion problems may occur. Instructions for surface treatment are included with the material, but in the vast majority of cases, a deep penetration acrylate primer is used.
If you believe numerous customer reviews, it is not advisable to cover the entire facade with thermal paint. But the treatment of individual areas with a heat insulator - for example, slopes and others hard to reach places gives excellent results.
Liquid insulation for work in winter
It differs from other analogues in that it can be applied to the surface at subzero temperatures. This includes brands such as “Akterm Nord”, “Korund Zima”, “Bronya Zima”.
Thermal paint "Akterm Nord" retains its properties at a temperature of -300C. A mixture consisting of white spirit and solvent is used as a solvent for this thermal insulation material. Before applying Akterm Nord paint, the surface must be thoroughly cleaned and dried. When working with this material, there are restrictions on surface humidity: for plaster and brick no more than 5%, for concrete 4%. Ambient humidity should not exceed 75-80%.
This thermal paint is a water-inactive system. It contains a mass of microgranules that have closed pores. Microgranules are in a solution of silicone-modified resin. As additional components Various plasticizers, fungicides and biocides are used.
Application of liquid thermal insulation materials to hot pipes
For insulation of various types of pipelines, chimneys, ventilation and air ducts, the following brands of thermal paint are used: “Korund Classic”, “Akterm Standard”, “Keramoizol”.
In order to achieve maximum results, the so-called “sandwich technology” is used when insulating pipes, according to which layers of liquid insulation alternate with layers of fiberglass having a thickness of 0.5 mm. A total of 4-5 layers are applied. To ensure a smooth surface, last layer apply a special varnish.
If it is necessary to insulate a polymer pipe, an adhesion test is first carried out. If the pipe surface is dry and clean, then no problems should arise.
Liquid thermal insulation "Armor" - scope and technical characteristics
The very name of this thermal insulation material indicates what it is reliable protection. The material was developed at the Volgograd Innovation Resource Center. Were taken as a basis American developments, on the basis of which it was possible to obtain an improved thermal insulation material at a price affordable for the average consumer.
Why is liquid thermal insulation armor so popular among buyers, in given time only positive ones?
The manufacturer presents a wide range of its products: “Bronya Classic”, “Bronya Anticor”, “Bronya Winter”, “Bronya Facade”, “Bronya Light”. Each type of paint has clearly defined and tested technical characteristics. Therefore, there will be no problems with the choice of insulator and method of its application.
All Bronya brand products are environmentally friendly and safe for health. Thermal insulation armor does not burn, it is easy to apply to all types of surfaces, the service life of the thermal insulation is several decades.
And if you decide to opt for this brand, then you can buy armor liquid thermal insulation much cheaper than its analogues, since this insulation is produced in Russia.
thermal paint "Astratek" - main characteristics
"Astratek" is the latest water-based thermal insulation material, which contains microscopic ceramic spheres. Acrylic polymers are used as a binder.
This thermal paint is used in the energy sector, in construction for insulation of walls, facades, floors, roofs, slopes, water pipes with hot and cold water, ventilation and air conditioning systems. “Astratek” creates an ultra-thin thermal insulation layer on the surface, which prevents condensation and protects the surface from corrosion, mold and fungi. The paint can be applied to concrete, polymer, brick and metal surfaces. “Astratek” can withstand temperature changes from -600C to +2500C.
The paint is non-toxic, environmentally friendly, and absolutely non-flammable. At temperatures above 8000C, the insulator begins to decompose into carbon and nitrogen oxides, which significantly slow down combustion.
liquid thermal insulation "Isollat". Insulation of metal structures with liquid thermal insulation
This brand is recommended for application to the surface of prefabricated metal structures: garages, hangars, warehouses, etc. Maximum effect is achieved by double-sided surface treatment - outside and inside. Thus, the paint protects the room from the inside from heat loss, and from the outside from excessive heating during the warm season.
If it is necessary to apply Isollat to galvanized metal, the surface must first be degreased, as problems with adhesion may arise. For complete confidence, you can apply an inexpensive primer, for example, GF-1 brand, to the galvanized surface.
"Isollat" does not stick well to of stainless steel and aluminum due to the oxide film formed on the surface of these metals. Therefore, before applying thermal paint to these materials, it is necessary to pre-treat them with a primer.
Which thermal paint should I choose?
We hope that the above material will to some extent help you decide on the choice of liquid heat insulator. And in order to simplify the issue of choosing paint as much as possible, below we will give approximate prices for insulation materials intended for walls and other structural elements of a residential building.
“Corundum classic” cost 10 liters – 3700-4960 rubles.
Astartek Universal" cost 1 liter - 415-450 rubles.
“Bronya Classic” cost 1 liter – 380-415 rubles.