Do-it-yourself euro picket fence. Step-by-step instructions with photos

A common dilemma when arranging a site is the choice of material for a strong, beautiful and durable fence. Among many options Special attention deserves a European picket fence, which is a worthy analogue wooden picket fence. A fence made from a European picket fence is characterized by increased strength, perfectly shades the surrounding area and, unlike a wooden picket fence, does not require special care and periodic painting.

Properties of Euro picket fence

The picket fence consists of metal strips of various profiles with a width from 40 to 120 mm and a length of 1.5-3 meters. High-quality cold-rolled galvanized steel is used in production. The metal thickness reaches 0.5 mm and has one- or two-sided painting with a thickness of 0.025 mm made of polymer material.

Externally, the Euro picket fence does not differ from the traditional wooden picket fence, but has increased strength, durability and has a large color palette. When choosing a European picket fence, you need to pay attention to the production technology, which is divided into three types:

1. Edge processing method:

• with rolled edge. The edges of the section are rolled, which gives the product strength and a more attractive appearance;
• without rolling. Sections are cheaper to produce and have a less neat appearance.

2. Manufacturing method:

• piece production. Each rail is passed through rolling mill. This improves the quality of the product and also increases its cost;
• cutting from corrugated sheet. The slats are cut from profile sheets. The ends of the picket fence are not machined, which reduces their quality. This technology makes the picket fence as accessible as possible.

3. Painting method:

• one- or two-sided polymer painting;
• powder painting. Allows you to get an even layer of paint on both sides.

Color variety of Euro picket fence

The advantage of a European picket fence

The European picket fence has the following advantages over its analogues:

• high airflow, similar to a wooden picket fence;
• long service life (more than 50 years);
• fire resistance;
• high strength and rigidity;
• attractive appearance;
• simple installation technology;
• low weight. Facilitates transportation and installation;
• resistance to high humidity and direct sunlight.

Installing a Euro picket fence with your own hands

To install the fence you need following materials and tools:

• Intermediate pillars. Profile pipe square section with a wall thickness of at least 2 mm;
• Cross beams made of rectangular profile pipe. Based on 2 pcs. to arrange the distance between two pillars;
• Tool for excavating soil for pillars. Shovel, hand or motorized drill;
• Level, sledgehammer, drill, hardware, tape measure;
• Primer and paint to match the color of the picket fence;
• Crushed stone, sand, cement.

The installation of a fence is practically no different from other types of fencing, but has nuances at the stage of attaching the picket fence.

Before starting work, the territory is marked and the locations of the pillars are indicated. The recommended distance between posts is 1.5-2 m.

To install the pillars, you first need to dig or drill a hole 50-60 cm deep. The pillar is leveled into the hole and additionally driven to a depth of 30-50 cm. Afterwards, the hole with the pillar is poured concrete mixture.

After the concrete has set, logs are welded or screwed to the pillars. The lower beam is attached at a distance of 30-50 cm from the ground level. The top one is 20-30 cm from the pole pole. The resulting frame is primed and painted in the color of the European picket fence.

A picket fence is attached strictly vertically to the frame using self-tapping screws. The recommended distance between slats is 2-5 cm.

There are two ways to attach a picket fence - regular and checkerboard.

Price of a European picket fence

average cost linear meter picket fence is 0.8 - 1.5 dollars. Depending on the height of the fence, the width of the picket fence and the method of installation, the cost of the fence is calculated.

Fencing the territory is an indispensable attribute of a landscaped courtyard. The fence performs protective and decorative functions. In many cases, it becomes a very significant element of the overall architectural and landscape appearance of the estate. It can be built using a wide variety of materials. Here we will look at the installation option. If you have basic construction skills, you can cope with this task without much difficulty.

Types of Euro picket fence

The term “Euro picket fence” usually refers to a metal material for fencing made from profiled sheet metal. Much less often it is made from profiled pipes rectangular section Therefore, in the future we will consider only the first option. Before you start installing, select the most suitable material. Picket fence options differ in characteristics such as:

• profile shape – U-shaped, M-shaped, triangular, convex round;
• edge quality – regular or rolled;
• decorative and protective coating – one- or two-sided, polymer film or powder coating;
• the shape of the upper edge of the strips is in the form of a trapezoid (standard), peak, tulip (trefoil, clover), dome, wave, straight under the covering strip.

Here are a few photos illustrating different types and options for Euro picket fence according to the shape of the profile, according to the shape of the upper cut , With polymer coating, including imitating valuable species wood,
. Thanks to the huge variety of materials, installation DIY picket fence can be performed in any conditions.

Material selection

Before you start building a fence, you should decide on its type and location. To do this, it is enough to prepare a sketch and take measurements. The data obtained will help in choosing required quantity materials. When purchasing a picket fence, be sure to take into account the dimensions of its strips, which have the following ranges of values:

1. length – 0.5–3 m;
2. width – 80–130 mm;
3. thickness – 0.4–0.5 mm.

Most often, for fences with a simple (rectangular) span shape, a picket fence 150–160 cm long is chosen. If you intend to build a fence of a more complex shape, for example, from the options shown in these photos
, the selection of materials must be treated with greater care. In this case, you will need strips of different lengths. To reduce waste losses, it is better to purchase a factory-ready picket fence of the most suitable sizes.

The most beautiful and durable DIY picket fence will be made from planks with a polymer decorative and protective coating to look like wood: for example, this
. Fences made of multi-colored picket fences look original
, especially since the color range of this material is practically unlimited. In other words, you can experiment with the appearance of the fences as you wish.

Other materials for installing a European picket fence

In order to do DIY picket fence, you will need other materials. Their list depends on general design and fencing design. The most common type of such fences is a fence on a metal frame with vertical slats. The basic structure of the fence, the construction of which we will talk about later, is represented by the following sketch
. The set of materials for its construction must include:

• bulk materials for concreting racks - cement, sand, crushed stone;
• square profile pipes 60x60 mm with a wall thickness of 2 mm - for racks;
• profile pipes of rectangular section 40x20 mm with a wall thickness of 1.5 mm - for horizontal joists;
• hardware with which the picket fence is attached to the logs - usually special metal screws are used for this;
• plugs for the upper ends of the racks - to protect against precipitation getting inside.

Instead of metal posts, you can lay out brick or stone pillars and parapets, but this type of fence will cost much more. When the fencing option has been selected, the work plan has been drawn up, and the materials have been purchased, you can begin to install DIY picket fence. You should not save too much on components for the fence. High-quality materials will last at least 1.5 times longer than their budget counterparts price segment. Therefore, the increased costs will be fully justified.

Installing a European picket fence: step-by-step instructions

Understanding the installation process DIY picket fence The easiest way to get it is by watching videos posted on the Internet. As an example, we can offer the following videos:

Here, special attention should be paid to the condition of the soil, which various places can be completely different. This is the determining factor for choosing the method of installing fence posts. The fencing construction procedure includes the following steps:

1.​ Marking the contour of the fence on the ground. It is performed to determine the installation locations of the racks, including under the wicket and gate. The optimal length of fence spans is 2–3 m. If necessary, during marking the ground surface is also leveled.

2. Installation of the outer fence posts. A cord is pulled between them to align the entire row of supports along the same line. The depth of the holes for the posts, depending on the condition of the soil, can be in the range of 1–1.8 m. The weaker the soil, the deeper the wells should be. In dry and strong soil, you can do without concreting - just fill the racks. After concreting, the racks must be left for at least a day, and preferably 2–3 days.

3.​ Installation of horizontal logs - they are welded or bolted to vertical supports. The lower crossbars are located at a height of at least 30 cm from the ground. The top ones are 50 cm below the top of the rack. Welding seams must be thoroughly cleaned. The finished frame must be coated with a primer and painted (usually the color of the picket fence).

4.​ Attaching the picket fence. It is not recommended to make the distance between the slats more than half their width - with the exception of “checkerboard”, where the gaps can be bigger size. When attaching a picket fence, it is best to use a template (for example, from a board), which will ensure that you get the same spacing between the planks. The picket fence is attached with two pairs of screws to the upper and lower crossbars.

If the work order is followed, installation DIY picket fence guarantees you a result of excellent quality and durability, for example this
or like this . The work of building a fence cannot be called particularly difficult. This good opportunity save a lot of money, because the cost of installing a meter of fence from metal picket fence Depending on its complexity, they charge 1,000 – 1,800 rubles.

A fence made from high-quality European picket fence will last about 50 years. Adjusted for service life, this is the cheapest yard fence available. If defects in the decorative and protective coating are promptly eliminated, the structure can last even longer. For those who want to install DIY picket fence We offer a number of recommendations that may be very useful

Following these recommendations will ensure the protection of the most vulnerable areas of the frame from corrosion, the excellent appearance of the fence, and its safety for others. Based on the totality of their performance characteristics and the aesthetic advantages of a fence made of Euro picket fences are in no way inferior to more expensive fences made of stone or brick. In addition, the picket fence is a “transparent” fence that does not interfere with the ventilation of the estate.

At the same time, your property will not lose its individuality: many variations of the installation of such a picket fence have been developed, it is available in different sizes and colors - there is plenty to choose from. It doesn’t take much effort or special skills to install such a fence with your own hands. It will become the subject of your pride and the envy of your neighbors.

Do-it-yourself picket fence from corrugated board: step-by-step instructions

1. Frame. It is made from a metal profile pipe with dimensions of 6 by 6 cm or 8 by 8 cm. The thickness of the pipe wall is from 2 to 4 mm. The pipes are cut into pieces of the required length depending on the planned height of the fence plus at least 1.2 m for the digging depth. Then holes should be drilled in the ground into which pipes are first lowered and then driven.

The distance between the support pipes determines the height and weight of the corrugated sheet; it varies from 1.5 to 2.5 m. The voids are filled with gravel and compacted; concreting is not recommended by experts. In conclusion to the received pillars
you need to weld horizontal logs from the same profile pipe - there can be two or three of them if the fence is higher than two meters.

2. Ready frame need to be coated with a special anti-corrosion compound. It is available in a fairly wide range color scheme. This will not only protect your fence from mechanical impact external factors and will extend its durability, but also give it an aesthetic appearance. A picket fence made of corrugated board will fit harmoniously into overall design without falling out of the color palette.
3. Now you can start installation the picket fence itself. You can choose pickets with rolled or unrolled edges. In the budget version, the pickets are cut from a single sheet of corrugated board - this can be seen by the raw edges of the pickets and the standard pattern of the profile itself. If the pickets are made according to individual order, they are passed through a rolling machine to give the desired shape and relief.

The upper edge of the euro-picket fence can be smooth, rounded, triangular, trident-shaped, arrow-shaped, etc. For low fences, you should not choose pickets with a sharp top edge, this can lead to injury.

Pay attention to the painting method: it can be double-sided, single-sided, polymer or powder. The picket fence is attached using metal screws at four or six points - depending on the number of horizontal logs.

4. The appearance of a corrugated fence is largely determined by width of the gap between the pickets. The maximum distance is 5 cm. You can make a gap of 4, 3 or 2 cm. Or you can increase the gap to 8 cm (according to the width of the picket), but at the same time fasten the pickets in a checkerboard pattern on the inside and outside.
5. Profiled Euro picket fence goes well with others finishing materials , especially with stone, brick and wood. You can first lay out the foundation, the base of the fence and the columns from red, for example, brick, and install segments of brown picket fence between them - it will turn out stylish and solid.

How much does a corrugated picket fence cost: materials and work

Prices for materials will depend not only on the number of linear meters of the fence itself, but also on the parameters of the picket fence. Pickets are produced various sizes(length from 0.5 to 3 m and width from 8 to 11.5 cm). Per linear meter of fencing you will need from 6 to 8 pickets - depending on the width of one fragment.

1 linear meter of picket fence made of corrugated board will cost from 500 to 700 rubles, depending on processing, height, and painting method. The region also plays a role: if similar products are not produced there, but are imported, the cost will be slightly higher. Now multiply the cost by the number of linear meters. Add the cost of supporting profile pipes for the frame - approximately 200 rubles. per meter Plus mounting material. And plus Additional materials for installation and decoration, if any are used: brick, stone, wood, as well as a wicket or gate. Don't forget about delivery.

If it is not indicated that it is free, you will have to pay an average of 25-30 rubles for one kilometer. – prices vary in each region and city.

Installation of a metal Euro picket fence by a team of specialists with a height of 1.5 m costs from 1300 rubles, a height of 1.8 m - from 1450 rubles, a height of 2.5 m and above - from 1600 rubles.

Euro picket fence. Reviews

• “The aesthetic appearance of the fence will be much better if you apply a little imagination in the process of working with corrugated sheeting - as with any other building material. And you will be original and inimitable. After all, corrugated sheeting can be chosen in any color, width and height. So the corrugated sheet is yours too creativity will be able to create such beauty that will delight your eye and serve faithfully for many decades.”
• “Corrugated sheeting for a picket fence is a very good and non-standard idea. It is clear that such a fence not only looks more beautiful, but will also last much longer than a wooden one. A very useful note is that when choosing the decorative shape of the upper edge of the profile, we must not forget about the height of the fence - although both children and pets can get hurt.”
• “It’s just a blank fence 2 meters high - it’s somehow closed, it protects you from the living world, like in a monastery or prison. And a picket fence made of corrugated board adds lightness and pleasant variety; not all neighbors have such a fence. As a gardener, I think the main advantage is that personal plot not only protected, but also well lit and ventilated. And it’s decorated very beautifully and originally.”
• “I installed the fence segments with solid corrugated board, interspersing them with segments of corrugated picket fence. I also laid out the brick pillars with my own hands, it was enough trouble with such a fence. But the fence spans themselves, made of corrugated sheets or picket fences, are, in principle, quite simple to install; anyone can do it, if only they have the hands and the desire.”

Install a picket fence made of corrugated board- it’s a simple matter, but for some it may seem boring and tedious. In this case, contact a specialized company. You'll have to pay more, but you'll get as soon as possible a brand new eurofence, manufactured and installed according to your individual sketch.

Photo

A fence made of metal Euro picket fences can be installed with gaps of different widths. Euro picket fence is stylish, creative and practical.

Relatively recently to abundance building materials which are used for the construction of fences and fences joined.

General information about this type of building materials

Attaching a picket fence does not cause any particular difficulties even for a beginner if you use all the recommendations and advice from experts in this industry.

This material is environmentally friendly and has rightfully now taken a leading position in consumption due to its properties, such as reliability, lightness and aesthetic appeal. The Euro picket fence is based on corrugated sheeting, which consists of cold-rolled galvanized steel of the highest quality. At the manufacturing plant, it can be processed and cut, after which it can be used for its intended purpose. The main difference between Euro picket fence and corrugated board is that it is not a solid sheet, but is presented in the form of separately cut slats, which in their appearance resemble a wooden picket fence. Next, the material is coated with one or more layers polymer paint

. The service life of a high-quality European picket fence can last about 40-50 years.

Qualities that a European picket fence has There are many positive qualities

which this building material has: By using modern technologies it became possible to apply a special coating, thanks to which the material acquires different colors and texture - starting with simple coloring and ending with antique-style works. One by one appearance

It is extremely difficult to distinguish a European picket fence from a picket fence based on valuable wood species. Due to its metallic origin, the Euro picket fence is not subject to rotting. Due to the fact that during the production process it is coated with double protective layer

The variety of picket fence sizes is also pleasing – from 50 cm to 3 meters. Thanks largely to this, it has gained a wide range of applications: from fencing flower beds and playgrounds to fencing houses, offices and factories.

Compared to other building materials, the weight of metal picket fences is light, which gives the advantage of easy loading and transportation.

The aesthetic appeal of Euro picket fences gives a great impetus to the flight of imagination of designers in the process of designing landscapes of territories.

High resistance to adverse external factors, as a result of which the service life can be about 40-50 years.

The favorable combination of such qualities as airflow and transparency allows the use of Euro picket fences on summer cottages. It creates virtually no shadow on the site, which has a beneficial effect on the ventilation of the area. Easy to attach Euro picket fence and affordable price More and more fans and users are giving this building material.

Analyzing all aspects of the functioning of this type of building materials, we can confidently say that negative aspects not detected.

Variety of design solutions

Abundance various options design solutions pleasantly pleased, their main types are:

“Wave”, which is installed from sections, the top of each of them is similar in shape to a wave;

“Convex arc”, which is installed using the binding method, their upper edge is similar in appearance to a convex arc;

“Concave arc”, a sectional installation, where each section is similar in appearance to a concave arc;

“Herringbone”, the installation resembles the previous options, the only difference is that the top is similar in appearance to a Christmas tree;

"Canyon", sectional installation, in which each subsequent rail from the beginning of the section is reduced by one centimeter, and after the center it increases accordingly;

“Peaks”, the top of each sectional component is similar to a peak;

“Wings”, the upper outline is similar to the wingspan;

"Ladder", built from alternating slats different sizes;

“Pyramid”, the outline of the tops is similar to the image of a pyramid;

“Trapezoid”, the shape of the bends has the shape of a trapezoid.

Fastening a metal picket fence

It is possible to attach a Euro picket fence to joists various types: brick, concrete, metal. The last representative is the most popular, since the material from which it is made is almost identical to the material of picket fences, and its service life is quite long, and the cost remains low. The diameter of the log is selected taking into account the weight of the structure (section). As the section becomes heavier, the diameter of the post should also increase.

How to attach a European picket fence to a fence

The step-by-step instructions for attaching the Euro picket fence are as follows:

The whole fastening process

The installation of any fence begins with the creation of supports. Metal poles can be installed in several ways: by driving into the soil or by concreting. To implement the first option, a hole is drilled into which a post is driven and fixed with a special mixture. The second option is implemented by making a hole in the soil under the post (about 55-75 cm), then installing the reinforcement in a perpendicular position relative to earth's surface, secured with reinforcement and expected to dry.

The next step is the installation cross beams to already fixed pillars. They can be attached in several ways: on the frame plate or overlapped. It is recommended to resort to the latter option, as it improves the aesthetic qualities of the structure. Docking areas must be cleaned and primed.

Then you need to install the wicket and gate with the installation of the appropriate fittings.

To prevent sedimentary water from entering the pipes, plugs are fixed, often on a plastic base.

Upon completion of installation and painting work of all installed structures You can start fixing the Euro picket fence. The pickets are attached using self-tapping screws of the appropriate color. Each rail must be fixed in four places. If planned double-sided fastening, then it is embodied in a checkerboard pattern on the front and back sides.

The technology for erecting barriers is the property of developers. There are no secrets, everything is accessible and open! installed the frame and assembled the filling from corrugated board or picket fence. However, any amateur activity when installing a fence is excluded. Deviations from step-by-step instructions will not bring pleasant moments in the future. Why not take advantage useful tips!

Euro picket fence photo

We owe the appearance of the euro picket fence on our territory to the manufacturers and manufacturers of stainless steel with a wide range of brands - the Belgian ArcelorMittal and German ThyssenKrupp companies. The adopted know-how of manufacturing lamellas from steel sheet served as an accelerator for the creation of a metal picket fence.

Euro metal picket fence is a product made of cold-rolled galvanized steel High Quality– corrugated sheets, industrially cut into individual elements (lamellas) with a polymer coating.

Assembled from Euro picket fence sectional fences compare favorably with existing structures, combining metal strength, structural durability and low maintenance. The metal picket fence has become in demand due to the unhindered movement of air in areas and its original appearance.



The cost of a European picket fence is acceptable for the purchase of lightweight slats and a structure made of galvanized steel with a polymer coating and increased rigidity. Let’s face it, many people assemble and install a European picket fence on their own.



Useful tips

The profile of the Euro picket fence is varied - from rectangular to semicircular. The dimensions of the lamellas range in width from 80 to 128 mm.

If the European picket fence is still Terra Incognito for you, then this video comes in handy.

Types of Euro picket fence

There are single-sided or double-sided Euro picket fences. For one-sided fastening, the placement of slats or picket slats is single-row with a gap; double-sided fastening ensures a double-sided arrangement of slats in a checkerboard pattern. Let us tell you, Euro picket fence (side A) and (side B) are used for traditional lining with a distance between the lamellas of up to 40 mm. For double-sided lining (“Blinds”) use sides A and B with offset installation of slats.



To install a European picket fence, it is recommended to prepare the frame and secure the pickets using a mounting clip on the posts.

Fence installation technology

In summary, the fence technology consists of the following stages:

• on the selected flat area, the future location of the support pillars is planned
• under the support pillars they dig or drill holes in the ground up to 800 mm deep
• the support pillars are installed, the holes are filled with concrete mixture, and masonry is organized for brick pillars
• Transverse logs are attached to the supports in mounting clips, onto which picket fences are to be installed
• install the picket fence and secure it to horizontal logs
• to profile metal poles install a plug.

Using basic technology, you can install a fence in certain ways.

methods of constructing a metal fence

There are fundamentally different ways of constructing fences for picket fences:

• fence with metal posts
• fence with decorative brick posts
• metal picket fence on a strip foundation
• fence with brick pillars on a monolithic foundation.



Any method is possible for manual installation. Let us tell you what experts think budget option fence on metal posts.

DIY picket fence

Installation begins with the installation of supports that can be installed in the following ways: driving or backfilling into a drilled hole and concreting.

Euro picket fence posts

Installation of support posts is considered a fundamental step when creating a fence. Possible installation options: *metal fence posts or brick ones.

Metal

For pillars, profile pipes with a cross section of 60x60x2, 80x80x3 and 100x100x3 mm are commonly used, as well as screw piles D76 and D89. In practice, preference is given to profile pipes with a cross-section of 80x80x3, capable of supporting the weight of the picket fence at maximum load.



To fasten the lamellas, use transverse frame joists from a profile pipe 40x40x2 or 50x25x2mm. The pillars are secured by driving and backfilling. The bottom of the hole for the post is strengthened, after installing the pipes it is covered with gravel and compacted. Each picket lamella is fastened with 4 self-tapping screws - 2 each for the upper and lower logs.

Useful tips

The choice of profile pipe cross-section as support pillars must be confirmed rough calculation, the initial data of which are the parameters of the total length of the fence and the number of pillars. The number of required slats is calculated by dividing the length of the fence by the width of the slats, taking into account the width of the gap between the slats. For double-sided installation the result obtained is doubled.



methods of fastening a metal picket fence

There are several ways to horizontally and vertical mounting metal picket fence: using welding and using special fastening systems and holders. Fastening X-brackets allow you to fasten the logs horizontally on vertically mounted support posts.



Step-by-step instruction

Step 1. Installation of load-bearing support pillars.

Step 2. Installation of transverse joists according to the calculated height and weight of the fence.

Step 3. Attaching the pickets individually

Step 4. Installing plugs on profile pipes.

Placing a metal Euro picket fence on metal poles is the most affordable way.

Useful tips for installing Euro picket fences are shown here.

The installation method on strip foundation, especially if they are involved brick pillars.

Brick

To install brick fence posts, it is necessary to erect formwork and a foundation under brickwork due to the solid weight of the entire structure. Tape monolithic foundation will allow you to erect fences up to 5 m high; with a well-chosen pattern of the euro-picket fence, the fence has a presentable appearance



Step-by-step instruction

Step 1. Marking the area for brick pillars

Step 2. Digging a trench with sand and crushed stone

Step 3. Laying reinforcement and installing support pillars, followed by pouring the foundation with concrete

Step 4: Tying each one support pillar brick

Step 5. Installation of fastening elements for transverse joists

Step 6. Piecewise fastening of picket fences.



The transverse joists for mounting the picket fence on brick pillars and the supporting profile are fastened to special brackets using dowels and self-tapping screws.

The construction of brick pillars for fencing is shown in the video.