Liquid nails characteristics. Liquid nails - assembly adhesive, instructions for use and characteristics, video

Under the “Moment Montage” brand, the building materials market offers a variety of adhesive compositions, among which there is a remedy for any occasion. Such diversity causes confusion for an inexperienced builder. How to choose the right Moment Installation adhesive?

Each type of adhesive mixtures “Moment Installation” has its own technical qualities and is intended for fastening a certain type of materials when necessary conditions. An incorrect choice will result in poor adhesion or damage to the material. Information about the types and compatibility of materials is contained in the instructions.

What does assembly adhesive consist of?

The glue is able to interact with the material of the working surfaces, so it can easily damage it. This property depends on the type of solvent included in the mixture. Mounting adhesive “Moment” is divided into two types:

1. Based on synthetic resins. These liquid nails contain organic solvents, which gives them a pungent odor. They react with plastic, which means they are not used for gluing foam or PVC parts. The packaging always bears the designation “MR”. The connections obtained using these adhesives differ high strength and increased resistance to moisture. This type of liquid nails is highly flammable.
2. Based on polyacrylate-water dispersion. These liquid nails are marked “MB” on the packaging. Their composition is chemically neutral, so they are used for interior decoration premises. They are usually used to secure baseboards, baguettes or PVC tiles.

Advice! If in technical description It is said that the glue contains polyvinyl acetate or polyacrylate-water dispersion, then it is suitable for processing PVC.

Selection of installation adhesive for each material

To make life easier for the consumer and to simplify the selection of suitable liquid nails, the manufacturer has divided its products into categories, indicating the type and characteristics of the materials to which it is applicable:

• For installation metal elements and ceramics, all compositions of the “MR” brand are used: “For panels”, “Universal” (400 g), “Instant grip”, “Extra strong”. To perform indoor finishing, the acrylic composition “Express MV-50” is used.
• To secure mirror structures, use special mounting adhesive MP-50, which does not contain substances that damage the amalgam. With this glue, mirrors are installed on any base (metal, concrete, paint, wood, etc.) When frozen, plasticity and elasticity are preserved, preventing the mirror from moving vertically under its own weight.
• For renovations in rooms with high humidity(in a bathroom, bathroom or swimming pool), especially moisture-resistant mounting adhesive MB-40 is suitable. “Moment Montazh MF-80” is also used, which is created on the basis of polyurethane prepolymers, does not contain cyanides, and has the qualities of a sealant.
• At finishing works indoors for fastening plinths, ceiling elements, styrofoam panels, PVC tiles you should choose MV-45 “Express Decor” glue. The white color of the composition allows you to organically fit the decorative element into the structure. Gluing is distinguished by invisible seams, since when drying the shrinkage of the glue is minimal.
• For installation of voluminous, heavy panels and large structures compositions with increased primary adhesion parameters are used. This is “Super Strong Lux” acrylic adhesive, which has an initial adhesion force of 100 kg per square meter. There are also liquid nails based on rubber: MP-35 “For panels” and MP-55 “Extra strong”.

Acrylic liquid nails

Such installation mixtures are water-based and therefore do not pose an environmental hazard to humans.

Important! This glue is toxic and dangerous to fish. In this regard, the remaining unused acrylic (unpolymerized) adhesive composition cannot be disposed of in the sewer system.

All brands of water-dispersion-based Moment Liquid Nails adhesive have common properties:

• no strong smell;
• increased adhesive qualities;
• suitable not only for gluing parts, but also for filling gaps and leveling surfaces;
• used for both indoor and outdoor use, as they are resistant to water and damp environments;
• it is possible to paint the dried glue with dispersion paint;
• fast initial grip, the strength parameter of which is indicated in the name by a number;
• allows you to adjust the placement of parts within 15 minutes from the moment of applying the adhesive mixture;
• freezing of unhardened mixture is not allowed;
• permissible temperature for gluing work is from +5 to +35 degrees;
• the mixture is packaged in a tube designed to work with a plunger gun;
• the glue does not lose its qualities for 1.5 years when stored in a factory hermetically sealed bottle.

Acrylic mounting adhesive “Moment” is available in two versions: white and transparent. Colorless glue is marked capital letter“p”, for example, MVP-70.

Wide range of materials fixed with acrylic liquid nails, suggests that they are universal. In particular, mixtures of this type are recommended for gluing PVC elements. They do not contain aggressive reagents, and the porous base absorbs part of the glue, increasing the strength of the connection.

When filling slot voids up to 1.5 cm wide with glue, shrinkage is invisible. If it is necessary to fill voluminous recesses, it is recommended to use wood or plaster inserts.

Advice! Excess water-dispersion glue before polymerization is simply removed with a damp cloth.

Liquid nails on synthetic resins

This kind adhesive mixtures designed for installation work. They contain evaporating substances that are harmful to health, so work is carried out in well-ventilated areas.

All rubber compounds are characterized by the following:

• increased moisture resistance of the connection allows the use of glue in places of constant contact with water;
• more often used as a sealant;
• fasten structural elements and materials for any base: brick, concrete, wood, metal, glass, PVC or chipboard;
• perfectly glues polished, non-porous surfaces;
• the resulting connection is elastic and resistant to vibration;

Important! Selected species Liquid nails based on synthetic resins are suitable for gluing polystyrene foam, but this is done in rare cases.

The technology of work differs from the use acrylic glue. Surfaces treated with liquid nails are first joined, then immediately diluted to allow the solvent to evaporate, which helps improve the initial bond. After 7-10 minutes, the elements are reconnected and pressed tightly. Excess glue cannot be removed with water; you will have to use a solvent; in addition, there is a high probability of damaging adjacent elements.

Basic principles of installing slabs using liquid nails

1. Before gluing on fresh concrete base you need to wait a month for the moisture to completely evaporate, as well as other substances that are released during the hardening process.
2. The painted base must first be sanded to remove the gloss. Then just install the PVC panels.
3. “Moment” assembly adhesive should be applied with constant pressure, in a strip in the shape of a snake or straight lines along the perimeter of the slab with a distance of approximately 2 cm from the edge.
4. Rubber glue sets within a quarter of an hour. Therefore, when using it, a rapid evaporation operation should be carried out, then the tile is installed in place and pressed tightly mechanically (using a screed, brackets). After a day, the clamps can be removed.

Glue "moment liquid nails" is a simple and convenient replacement and addition to traditional mechanical method fastening of products and parts during construction and finishing work indoors and outdoors. Due to the absence of metal fasteners finished design looks neat and harmonious. Glue "Moment Installation" is one of the most popular and affordable of all. similar materials.

Kirill Sysoev

Calloused hands never get bored!

Content

If you decide to buy liquid nails, then you should know that this is a type of glue with high strength characteristics, the scope of which is joining materials during construction and installation. The surfaces to be bonded can even be dissimilar. Due to the content of fine-grained filler, such assembly adhesive can also connect loosely adjacent parts. You will learn below how to glue with liquid nails and choose them.

What are liquid nails

The name itself comes from the American brand Liquid Nails by Macco. In the mid-20th century, it was the first to produce glue in cartridges. Liquid nails are a very strong adhesive based on acrylic and organic solvents. Clay with increased plasticity is used as a fine-grained filler. The cost of liquid nails in Moscow and St. Petersburg varies between 100-500 rubles. It's not very expensive.

What can be glued with liquid nails

The main area of ​​use is construction and repair. Glue helps connect a variety of materials. Even a drop of the product can withstand a weight of almost 50 kg, and on the ceiling. In general, the strength of the glue ranges from 12 to 80 kg per square centimeter. Almost any surface is suitable for connection - aluminum, stone, drywall, mirrors, wood, polymer tiles. Plastic, glass and ceramics can also be glued with liquid nails.

How to work with liquid nails

The main thing in the instructions on how to use liquid nails is to take precautions. A respirator, gloves and safety glasses will be required to prevent skin damage and respiratory tract. The drying time for liquid nails is 24 hours, although they set within 20-35 minutes. Before starting work, the surfaces to be glued must be wiped off from dirt. The glue can be cold or hot curing. It is applied in dots or stripes; the tube must first be inserted into the gun. Then the parts are pressed tightly against each other.

Types of liquid nails

Strength and adhesion determines chemical composition glue. According to this criterion, organosoluble and water-soluble types of liquid nails are distinguished. They differ in many ways. Main characteristics of each type:

1. Organosoluble, synthetic rubber-based, or neoprene nails. They are considered universal, used in any climatic conditions and suitable for all surfaces. They have a pungent odor that lasts for several days.
2. Water-soluble or acrylic nails. They are more environmentally friendly, but cannot be used for sub-zero temperature. Suitable for gluing porous materials and other lightweight structures. They can be washed with water and mineral solvent.

Liquid nails for plastic

In addition to the main classification based on composition, there is a division of construction adhesive and materials for which it is recommended. For example, liquid nails for plastic. It says on the packaging that the glue is suitable for PVC. It is better to take compositions with a setting time of less than five minutes, otherwise it will be inconvenient to press the materials against each other, especially the panels against the ceiling. As for manufacturers, the more well-known are Pozitiv, Titan, Makrofix, Krass, Kraftool, Titebond and Quadro.

Mounting adhesive Kraftool KN-915

• tube 310 ml - 131 rub.

Characteristics:

• application temperature – 10-30 degrees;
• color – beige;
• setting time – 10 minutes;
• complete drying - 72 hours;
• heat resistant;
• water resistance - yes.

• additionally contain an antiseptic;
• can be used indoors and outdoors.

KRASS glue, extra strong, white, 300 ml

• 140 rub.

Characteristics:

• storage temperature – 5-25 degrees;
• setting time – 15 minutes;
• complete drying – 24-72 hours;
• base – water;
• water resistance - yes.

• does not crack;
• does not shrink;
• moisture resistant;
• has no smell;
• thixotropic.

Liquid nails for mirrors

When final decorating a room, gluing a mirror is often necessary, for example, in a hallway or bathroom. In this case, silicone glue will be required. These liquid nails are ideal for mirrors. But there are several installation nuances here. Until the mirror is completely set, it must be secured with masking or construction tape. The glue itself must not be applied clearly along the edges, otherwise the composition will leak out of the border.

TYTAN Professional for mirrors No. 930, beige, 380 g

• 125 rub.

Characteristics:

• shelf life – 12 months;
• consumption – 200-400 g/m2;
• complete drying - 72 hours.

• has good adhesion;

Moment Mounting for mirrors, 390 g

• 118 rub.

Characteristics:

• shelf life – 18 months;
• consumption – 33-41 sq.m. mirrors;
• setting time – 20 minutes;
• complete drying – 24 hours;
• application temperature – from -17 to +40;
• base - synthetic resin.

• does not damage mirror amalgam;
• resistant to vertical shifts;
• does not peel off;
• remains flexible;
• moisture resistant.

• has a risk of explosive ignition of vapors near heat sources.

Liquid nails for foam plastic

When using such construction adhesive when working with polystyrene foam, it is important to pay attention to the composition of the chosen product. It should not contain substances that will react with the insulation. The conditions for subsequent operation are also important. Liquid nails for foam plastic are also applied pointwise or in thin strips along the entire perimeter of the surface to be glued.

Torque Installation Super strong, 250 g

• 165 rub.

Characteristics:

• shelf life – 18 months;
• consumption - output with a roller with a diameter of 6 mm is 14 m;
• setting time – 15 minutes;
• complete drying – 24 hours;
• White color;
• base - synthetic resin.

• without smell;
• does not contain solvent;
• has a super strong adhesion of 70 kg/m2 already at the moment of gluing;
• Suitable for exterior and interior use.

Mounting adhesive STAYER, moisture-resistant, 280 ml

• 118 rub.

Characteristics:

• shelf life – 18 months;
• consumption – 300-500 g/m2;
• setting time – 10 minutes;
• complete drying - 72 hours;
• color – beige;
• application temperature – from 10 to +30;
• water resistance - yes.

• suitable for indoor and outdoor use;
• weather resistant.

Liquid nails for wood

Home renovation often involves working with wood - gluing trim, decorative elements, baseboards, or decorating a doorway. Construction adhesive is used here with ordinary nails. It is important to choose the right liquid ones, because living material tends to swell from moisture and dry out when there is a lack of it. Because of this, the fastening of parts may become loose. Liquid nails for wood, in addition to fastening elements, serve the function of protecting real nails from rust. There are also special compounds that can cope with joining even damp wood.

Makroflex MF910 for panels, 400 g

• 150 rub.

Characteristics:

• shelf life – 18 months;
• consumption – 300-500 g/m2;
• setting time – 5-10 minutes;
• complete drying - 72 hours;

• waterproof;
• vibration-resistant;
• suitable for indoor and outdoor work;
• elastic.

• not suitable for Teflon, polypropylene, polyethylene.

Vermeister Quick Stop Adesivo, 310 g

• 150 rub.

Characteristics:

• shelf life – 12 months;
• color – transparent;
• base – water;
• complete drying – 24 hours;
• Application temperature – from -7 to +40.

• ideal for fixing platbands and edging;
• thixotropic;
• It grips firmly after gluing.

• only for interior work.

Liquid nails for metal

There are special liquid nails for metal that allow you to glue it to various reasons in construction, including concrete, plaster, brick and plaster, and not provoke corrosion. In this case, only neoprene compounds are used. Only they can stick metal sheets or just metal products.

CYCLONE Glue instead of nails 99

• 120 rub.

Characteristics:

• shelf life – 18 months;
• consumption – 300-500 g/m2;
• base – styrene-butadiene rubber;
• complete drying – 24 hours;

• express setting;
• water resistance and elasticity of the seam after hardening;
• strength.

Titebond Invisible Bond, transparent, 380 g

• 220 rub.

Characteristics:

• shelf life – 18 months;
• consumption – 300-500 g/m2;
• complete drying – 24 hours;

• strength.

Waterproof liquid nails for the bathroom

In rooms with high humidity It is advisable to use construction adhesive with increased resistance to water. When choosing a product, be sure to ensure that this property is indicated on the packaging. Waterproof liquid nails for the bathroom are most often used when working with tiles - laying or tiling. In this case, it is worth considering that with such glue you will have less time for correction, because the composition sets quickly.

Isonail G815 for bathroom 300 ml

• 210 rub.

Characteristics:

• shelf life – 18 months;
• consumption – 10 linear meters;
• setting time – 5 minutes;
• complete drying – 24 hours;
• base – synthetic rubber.

• dries quickly;
• suitable for non-porous surfaces;
• chemically resistant;
• fills unevenness without shrinkage.

Macroflex MF915 Sanitary, plumbing assembly adhesive, 400 g

• 158 rub.

Characteristics:

• shelf life – 18 months;
• color – gray, beige;
• setting time – 10-15 minutes;
• complete drying – 24 hours;
• Application temperature – from -7 to +40.

• waterproof;
• vibration-resistant;
• elastic;
• can be painted.

Liquid nails for concrete

More heavy material Of all, concrete is considered. It is often necessary to glue dissimilar surfaces to it, such as drywall, rubber, plastic and even metal. In addition, many works are carried out outside, so liquid nails for concrete must be suitable for this and in some cases even have frost resistance. They are often a good alternative polyurethane foam and dry mixtures.

Assembly adhesive BISON KM-250 super strong, "Expert" series, transparent, 300 ml

• 193 rub.

Characteristics:

• shelf life – 18 months;
• color – transparent;
• setting time – 10-15 minutes;
• complete drying – 24 hours;
• Application temperature – 15-30 degrees.

• waterproof;
• good adhesion;
• shock and vibration resistant;
• frost-resistant;
• elastic.

STAYER BlackPRO EXTRA FIX S-901 super strong, PROFI series, 280 ml

• 150 rub.

Characteristics:

• shelf life – 12 months;
• color – beige;
• setting time – 10-15 minutes;
• complete drying – 24 hours;
• Application temperature – from 10 to 30 degrees.

• fast initial setting;
• strong durable connection;
• frost-resistant and resistant to temperature changes.

Liquid nails for polystyrene foam

The main advantage that liquid nails for polystyrene foam have over dry mixtures and polyurethane adhesives is fast setting. This makes installation less difficult. This is due to the fact that foam plastic sheets or slabs do not have to be supported, which often has to be done when insulating external brick walls. But in such cases, it is still recommended to use both types of adhesives at once. This significantly improves the quality of the connection.

Mounting adhesive BISON PM-900 polyurethane, extra strong, "Expert" series, 300 ml

• 450 rub.

Characteristics:

• consumption – 300-500 g/m2;
• color – transparent;
• setting time – 10-15 minutes;
• complete drying - 72 hours;
• Application temperature – from 5 to 10 degrees.

• 2 in 1 – glue and sealant;
• high speed of hardening;
• without smell;
• UV resistant;
• frost and vibration resistant;
• durable, elastic.

BAU MASTER mounting for polystyrene foam, 31ml

• 85 rub.

Characteristics:

• shelf life – 18 months;
• consumption – 200-400 g/m2;
• setting time – 15 minutes;
• base – styrene-acrylic dispersion;
• complete drying – 48 hours;
• Application temperature – from 10 degrees.

• incombustible;
• elastic and impermeable seam;
• fast initial binding;

• not suitable for glass, mirrors and heavy structures.

Liquid nails for exterior use

The main property that liquid nails for outdoor work should have is frost resistance. They should also withstand moisture well. No less important in this case is the strength of the glue. Compositions based on organic solvents can withstand temperature changes and precipitation. Most of them have a sharp and bad smell, but for the street this fact is not so critical.

Glue "Ultima 309" (for external use), 360 g

• 184 rub.

Characteristics:

• shelf life – 18 months;
• color – light brown;
• setting time – 3-5 minutes;
• complete drying – 24 hours;
• Application temperature – from 5 degrees.

• withstands even heavy structures.

• Strong smell.

Titebond Heavy Duty, extra strong, 310 g

• 237 rub.

Characteristics:

• shelf life – 18 months;
• color – light brown;
• setting time – 20-30 minutes;
• complete drying – 24 hours;
• Application temperature – up to 18 degrees.

• fast initial setting;
• glues even wet and frozen wood;
• flexible.

• takes a long time to set.

Universal liquid nails

There is a special category construction adhesives, which are used for almost any material and under any conditions. These are universal liquid nails. They are distinguished by optimal characteristics, which is why their scope of use is much wider than that of other types. Although tea is used for small repair work, because such compositions do not have a narrow focus.

LN-601 MASTERTEKS universal 310 ml

• 220 rub.

Characteristics:

• shelf life – 18 months;
• consumption – 11 with a layer 6.5 mm wide;
• setting time – 10-15 minutes;
• complete drying – 24 hours;
• Application temperature – 10-30 degrees.

• fast initial setting;
• Suitable for wet areas.

Kraftool Universal, 300 ml

• 153 rub.

Characteristics:

• shelf life – 24 months;
• setting time – 10-20 minutes;
• complete drying – 24 hours;
• Application temperature – from 5 to 40 degrees.

• glues almost all materials, even polystyrene foam;
• frost and water resistant.

How to choose liquid nails

It is difficult to unequivocally answer the question which liquid nails are better. It all depends on the gluing conditions and the materials being joined. One of optimal options is considered to be “High-strength Installation Moment”. This composition is almost universal, suitable for gluing heavy cladding and even polystyrene. In general, when purchasing, it is important to consider the following factors:

1. Type of bonded surfaces. On water based Suitable only for joining porous materials. Smooth ones can only be glued with neoprene compounds.
2. Location of work. There are compositions for interior or exterior use. There are those that are used in both cases. This should be looked at on the packaging.
3. Weight of parts to be glued. In this case, it is necessary to pay attention to the strength of the selected composition; it is indicated in kg/m2.
4. Mastery. If this is your first time using any of the glues, it is better to choose the one that sets more slowly. This way you will have time to connect the parts better.
5. Packaging and manufacturer. Choose products only from trusted brands. “Moment” is cheap, it is also the most common. Although there are many other well-established manufacturers, which are listed above.
6. How much do liquid nails cost? No less important factor and cost. Choose those options that you can afford, keep an eye out for possible promotions and discounts in stores selling building materials.

Hello, dear visitors of our site! Today we will talk about liquid nails “Moment installation”. In addition, we will look at what other products this company produces and what exactly are they - liquid nails? Let's find out how much such products cost today.

Description and main characteristics of liquid nails “Moment Installation”

Such construction material, like liquid nails, is used as a universal adhesive for fastening the most different materials. Among the main areas of application of the material, we will highlight construction and repair, as well as finishing work.

About unique properties glue is literally the stuff of legends. So, just one drop of it, applied to the surface, can withstand weight up to several tens of kilograms in a vertical position.

If we compare liquid nails at the moment of installation with other types of glue, such as PVA glue or bustilate, then they hold surfaces together two or three times stronger.

Moreover, when using liquid nails, the treated surface does not oxidize or corrode, fungi do not form on it, etc.

Now a few words about the drying time of such liquid nails. In our case, it can be very different, everything will depend on the specific type of glue, but on average it is twenty five to thirty minutes before preliminary setting and about twenty four hours until it hardens completely.

But it would be reasonable to note that there are also “Moment” liquid nails that require less than five minutes to completely harden.

Where is the best place to use Moment Montazh glue?

In order to properly clarify the issue and areas of use liquid glue, we must simultaneously consider what types of “Montage” exist today.

So, a series of heavy-duty adhesives that allow you to do without nails, screws, etc., consists of the following water-based products:

1. "Montazh Express". It is used for fastening skirting boards, trim, tiles, decorative elements and wall plaques. The glue is great for children's buildings, and for residential buildings in general. It is odorless and does not require additional solvents. Fairly good initial grip strength.
2. “Editing Super Strong.” This type of liquid nails is used for fastening heavy structures - panels, window sills, decorative elements and door frames. It is also odorless and perfect for use in children's rooms. The initial grasp is simply tremendously powerful. The glue is capable of filling cracks whose thickness does not exceed one centimeter.

There are a number of other brands of glue that are made from synthetic rubber. This:

1. “Universal installation”, which, as you may have guessed from the name, is suitable for working with any materials.
2. “Installation Extra-Strength”, used for fastening particularly bulky structures and parts.
3. "Installation for panels." Indispensable when attaching panels.

General characteristics of “Installation”

Among general properties inherent in everything model range“Installation”, we will mark the most significant ones.

1. The initial bonding force is extremely high.
2. The adhesive is suitable for both uneven and even surfaces, non-absorbent and absorbent.
3. Elasticity.
4. It is possible to adjust the attached materials.
5. Water resistance.
6. Surfaces are glued quickly, efficiently and, most importantly, durable.
7. Nails are used with almost all known building materials.

Instructions for using liquid nails “Moment Installation”

So, with general characteristics We figured it out, now we’ll look at how to properly glue Moment liquid nails.

First stage. Thoroughly clean and degrease work surfaces.

Second phase. Apply glue to the work surface using a construction gun. You can do this in one of three ways:

1. mesh
2. dots
3. snake

Third stage. We press the two surfaces that need to be fastened with special density, give them the correct position and hold them there for two to three minutes.

Fourth stage. After this, we must wait until the liquid nails are completely dry (this is approximately twenty-four hours), and only after that the surface can be affected mechanically.

Construction gun for liquid nails

Separately, I would like to talk about the construction pistol itself. The fact is that few people know how the Moment Montazh liquid nails themselves are inserted into it. So, to begin with, we take a tube, a reservoir, and also the cartridge itself, which contains the actual liquid nails.

We screw on the dispenser, which must be cut at the end. Next we must insert the cartridge into the gun device. For this purpose, we move it to its original position, after which we fix a special tongue towards the gun.

Then we pull the rod all the way, insert a special cylinder and, using the release system, direct the drain with the ring forward so that the glue can be supplied to the dispenser. This procedure must be done until the gluing work is carried out or until the glue itself runs out.

To remove the cartridge, we again press the locking tab, hold it and at the same time pull the rod towards us in order to remove the empty cylinder from the device.

Pros and cons of liquid nails

Among benefits With this type of glue I would like to note the following:

1. They do not harm the work surface and are not susceptible to rust.
2. They are not only resistant to low temperatures, but also environmentally friendly.
3. They harden extremely quickly, regardless of the environment.
4. When working with liquid nails, no impact tools are required.
5. The connections are characterized by particular strength.
6. These nails can be used to glue any material, regardless of whether it is smooth or rough.

But flaws There are also (and where would we be without them?), and the main ones are the following:

1. When working with them, it is recommended to use respirators, since for some time after work the material may emit unpleasant odors.
2. Having no idea about such nails, it is quite difficult to manipulate them for the first time.

Other manufacturers of liquid nails

Among other manufacturers of liquid nails, in addition to Moment Installation itself, there are many good products. Thus, we can note the LN601 brand from the Macco company, known for its high performance in interior work.

In general, this is a universal glue, but it cannot be used when attaching mirrors or tiles. But Multi-Purpose, thanks to its excellent adhesion, can easily be used for plastic, brick, and foam.

Solvent Free is great for ceramic tiles as it dries quickly and is impervious to moisture.

If you need to glue a mirror, then the best option, perhaps, there will be LN-930.

And finally, it is better to fasten massive structures with Heavy Duty or Zigger 99 liquid nails. Here’s more for your reference.

Video - instructions and method of using liquid nails

Build durable, reliable and beautiful house or carrying out repairs when changing the interior design of a cottage or apartment is impossible without high-quality fasteners. You can give preference to the standard option - nails, but the procedure will be labor-intensive, the parts themselves will give additional load on the surface, and not all materials can be connected with them without losing their attractiveness. It is for these reasons that it is better to choose a more advanced modern version connections of sheets, profiles and modules are liquid nails.

This name is a collective name for a group of adhesive solutions. It was formed from the name of the company that first launched the production of such products - the American brand Liquid Nails.

This variety appeared on the world market about 30 years ago, more precisely, in 1968, and immediately gained constant popularity among consumers, both professionals and those who seek to carry out a number of repair and construction work in own home with your own hands. Liquid nail glue appeared on the domestic market only in the 90s of the last century, however, today the line of this product is already represented by many manufacturers.

Important! Regardless of your level of professional skills, before gluing any material to liquid nails, be sure to read the instructions to ensure you follow all the rules and truly ensure the maximum high level clutch reliability.

Liquid nails: characteristics and advantages

All adhesive solutions in this category are distinguished by excellent technical characteristics, which are at the same time significant advantages of the material, are:

What types of liquid nails are there?

There are 2 main ways to classify liquid nails:

The following types of adhesives are distinguished by purpose:

Based on their component composition, the following types of liquid nails are distinguished:

Where are liquid nails used?

The areas of application of liquid nails are quite diverse. With their help, you can solve many tasks that are quite problematic to perform using traditional fasteners.

The most common options:

What to look for when choosing?

To ensure that the expected result corresponds to that in reality, prerequisite is the acquisition quality material suitable type. This is quite easy to do if you follow simple recommendations:

How to use liquid nails?

The technology for using liquid nails is quite simple and easy to master even for those who do not have any construction skills. The particular convenience of using this glue is that it is easily dosed and applied to the surface in a small amount. Use even at home special mounting gun, in which the cartridge is installed, allows you to completely avoid overspending and at the same time reliably fix the parts even in hard-to-reach places.

Gluing with liquid nails - work progress:

How to use liquid nails - video instructions

Conclusion

The use of liquid nails is truly universal and can significantly reduce construction time and simplify the fastening process various parts, achieve increased aesthetic appeal due to the absence of additional holes and unsightly seams. Convince yourself of this by using this glue for the next planned work, but be sure to carefully select and follow the application technology. In this case, the result will certainly please you.

We can talk about adhesives for a very long time - modern industry produces them great amount. There are both universal and highly specialized adhesive compositions - even within the same trademark their varieties can number in the dozens. In this article, together with the website, we will talk about one of these adhesives produced under the auspices of the Henkel brand - “Moment Liquid Nails”. Let's decide on their purpose, application and learn how to use this type of glue correctly.

Moment liquid nails photo

Adhesive liquid nails: types and applications

The scope of application of glue liquid nails moment of installation is quite extensive, but their main purpose is to fix any wall panels and similar materials. The highlight of this glue is its elasticity even after complete drying. And this is what is necessary for gluing large products that undergo thermal expansion. It is elasticity that allows the material to expand and contract freely without the risk of tearing away from the surface. Liquid nails glue is unique in this regard.

How to use liquid nails

Today, Moment liquid nails glue is produced in ten varieties:

1. “Instant Grip” is an almost universal glue. It can be used to connect both porous and non-porous surfaces - it can easily cope with plastic, metal, brick, concrete, wood, ceramic tiles and many other materials used in construction.

2. “Express Decor” – works well with plastic, wood and polystyrene. In practice, it has been widely used in the installation of ceiling moldings made of foam plastic, all kinds of decorative friezes and panels made of PVC, polystyrene and other lightweight materials.

3. The moment of installation “for mirrors” - the name of this glue speaks for itself. It is able to connect a mirror or glass to any type of surface indoors.

4. Liquid nails Installation moment “Super strong transparent” - produced under the DGII marking. It can be used to glue wood, PVC, and cork. It works great on plastic and MDF skirting boards. According to the manufacturer, it can even be used to secure a door in the opening and install a window sill.

5. “Super strong” montage moment. It differs from its transparent brother only in its nondescript color.

Types of glue moment liquid nails

6. Installation point “Super strong plus” is a modified version of the two adhesive compositions described above. Added to all other qualities is the ability to be used outdoors – it sticks to everything and to anything.

7. “Very strong” – used in connections of heavy structures. If we are talking about reliably gluing a heavy object, then it is difficult to come up with a better solution than this type of liquid nails. In practice, this glue has shown itself to be excellent when working with slabs.

8. Installation moment “For panels” - used for installing any types of panels on concrete, brick, wood and any other base.

9. “Universal” - intended for everything and at the same time for nothing. In principle, it’s difficult to say anything bad about this type of liquid nails - in fact, it is an average glue that is used for the most part for gluing to any type of surface lightweight materials and average weight.

10. “Express” – glues quickly and efficiently. Designed for use both indoors and outdoors. Quite often used for finishing facades with gypsum or cement artificial stone.

Adhesives liquid nails photo

Liquid nails: instructions for use

In fact, Moment Installation is unpretentious to use, but, like most similar adhesive compositions, it has a lot of nuances. And the first, most basic of all, is the need to use a special gun; without it, squeezing liquid nails out of a cylinder is tedious. The gun is inexpensive and is sold at any hardware store for quite a price. affordable price– as a rule, we are talking about $4-10.

The liquid nail gun is quite simple to use. The metal tongue located behind the handle of the gun is pressed with a finger, after which the piston-pusher is pulled back, thereby making room for the glue bottle. When the cylinder is installed, the piston is pressed back in exactly the same way. Now everything is simple - swing the trigger and squeeze out the glue.

Gun for liquid nails photo

Many people have a question: how to open liquid nails? It's really simple. You don't wonder how to open a tube of toothpaste or hand cream, do you? There are two types of blockage of this glue - in the first case, you will have to cut off the sealed part of the plastic tube with a knife, and in the second case, if we are talking about tin or paper cylinders, additionally pierce it with a long nail protective film, located deep in the spout. This protection is necessary so that the glue has time to reach the consumer without losing its qualities.

Okay, that's all lyrics, let's get back to the technology of using glue. Moment installation of liquid nails. As elsewhere, work on gluing something using liquid nails begins with preparing the surface - dust, dirt, and loose paint must be completely removed. The surface of the walls and the glued material (if it is porous) must be covered with a layer of primer to increase the adhesion of the materials.

Liquid nails instructions for use

When the surfaces are dry, you can begin gluing them. Liquid nails are applied to one of the surfaces in two ways - either in continuous stripes or dotted. It is necessary to choose the application method based on the type of product. For example, long panels such as PVC plastic or MDF, it’s better to glue it pointwise, but ceiling plinth, will stick more firmly if the glue is applied in a strip.

Liquid nails application photo

Did you apply glue? Now we take the glued product and connect it to the base of the wall. Press tightly, if necessary, lightly tap with your fist and tear off the product. For what? The glue should dry out within 5-7 minutes. There is no escape from this – this is the lack of technology. If you want to glue surfaces, as they say, “tightly,” then you should not ignore this point. When the glue has dried, the panel is put in place and tapped well with a fist. This, in principle, is the whole technology - now you know how to use liquid nails. Installation moment and you can safely get to work.

And finally, a few tips for sloppy craftsmen - removing liquid nails not in a frozen state is tantamount to smearing them on the finished surface, thereby ruining it. First, wait until the glue dries, then carefully cut it off with a sharp blade - these are the instant liquid nails.