Large plastic door. How to choose plastic entrance doors for a private home: photos, installation features and design options

Components of the door block: leaf, frame frame, fittings.

Input plastic doors have a U-shaped welded PVC frame with an aluminum (low) threshold. Balcony doors are framed around the perimeter.

We produce single-leaf doors (left/right-hand versions), double-leaf doors (with a mullioned or mullionless ledge, including with leafs different widths), with a vertical impost, adjacent blind or translucent frame filling - in accordance with GOST 30970 "Door blocks made of polyvinyl chloride profiles".

By design options door blocks divided into:

single-leaf doors (left and right opening), double-leaf doors (including with leaves of different widths), with a vertical impost and adjacent blind or translucent frame filling;
doors with a transom (opening or non-opening);
doors with a threshold on mechanical connections (for example, aluminum), without a threshold, with a closed frame frame (threshold from the same frame profile).

Door blocks are divided into internal and external.

Marking:

“DPV” is an internal door block made of PVC profiles (intended for use inside a building: interior doors, for plumbing units, apartment entrances, etc.) door blocks,
"DPN" is an external door block made of PVC profiles (entrance to buildings, structures, as well as vestibules).

By type of filling, door blocks are divided into:

glazed (filled with double-glazed windows or various types of sheet glass: patterned, tempered, multilayer, reinforced, etc.);
solid (filled with panels or other opaque materials);
light or combined (with translucent filling of the upper part and solid filling of the lower part of the canvas);

The catalog shows prices for popular standard models PVC doors.
Products are made to order for a specific opening. To find out how much a door will cost based on its size, use: online PVC door calculator.

Calculation of the cost of a plastic door according to custom sizes produced by the manager. Elements of fittings, handles and locks that are not included in the basic package can be added. Doors are made to order various options openings: rotary, two-leaf hinged, sliding, tilt-sliding.

Slab doors

Shtulpovye street doors made of PVC profiles have traditional controls and allow for unobstructed passage across the entire width of the opening - the frame opens from one of the doors.

Shtulp - additional element doors, with lock. The frame is attached to one of the leaves of the double-leaf door. In the fixed position, the sash is motionless. If necessary, the frame lock is unlocked and both doors of the opening open.

You can select and buy a plastic hinged door in the double-leaf doors section.

Color options: painting and lamination of plastic doors

The standard door color is white. To order, the PVC door profile can have a color other than white, imitating wood: oak, pine, walnut.

Where to buy plastic doors without overpayment

In Moscow

In Moscow, you can order doors at the company’s office and at home/facility by inviting a field manager.

In another region
To order metal-plastic doors at catalog prices in the Moscow region or with delivery to another region, use the cart / use the “buy in one click” form on the website. To order a door made to your size, please indicate the parameters in the comments. Upon receipt of the application, the manager will contact you to clarify the details of the order and issue an invoice for payment.

The prices in the catalog for standard plastic doors are presented without installation and delivery costs. Delivery is carried out by transport Business-M company in Moscow and the region. To other regions - cargo delivery service. Delivery of windows and doors

Until recently, the main area of application for plastic entrance doors was shopping malls. Many owners have ordered entrance groups made of white plastic, which fit perfectly into the design of ready-made buildings. However, plastic entrance doors quickly proved not only their versatility, but also their practicality, and the appearance of a laminated profile significantly expanded the scope of their application.

Other types of doors

Features of plastic entrance doors

Street eraser doors are not afraid high humidity, frost, solar ultraviolet radiation. They are easy to care for - in places with high conductivity this has to be done often. With characteristic elegance, the entrance PVC doors They are characterized by high strength and burglary resistance. Of course, they are not such an insurmountable obstacle as armored steel doors, but they can protect against unauthorized entry.

For the production of outdoor plastic doors the following is used:

Additional reinforcement of plastic entrance doors against unauthorized entry includes a stronger steel profile, special anti-burglary fittings and armored or impact-resistant glazing.

By purchasing plastic entrance doors from the manufacturer you get a number of advantages:

Examples of work on the manufacture and installation of plastic entrance doors

Types of profile systems for plastic entrance doors and their characteristics

Profile systems for entrance doors are produced by many specialized companies. However, consumers for the most part prefer products from German manufacturers Rehau and KBE.

Profile name	Peculiarities	Number of cameras	System profile depth	Application
	Budget Profile			For balcony doors city apartments, exits to the terrace in private houses
	Additional insulation	3+thermoblock		Private construction, apartment buildings, shops and commercial real estate
	Two sealing circuits in the threshold area	4 - at the sash; 5 - at the box		Single leaf and double doors with opening outwards and inwards, doors with transom parts, high-rise construction, energy-saving construction
	Produced using Greenline technology			Private houses, apartment buildings, offices, hospitals and childcare facilities

Accessories for street doors

Reliable door operation is ensured by high-quality German fittings from leading manufacturers ROTO and Siegenia aubi. They are highly reliable, provide easy opening of even large doors and have great resource work (designed for 40,000 opening cycles).

For door structures, depending on the place of use, 2 types of handles are used:

Applicable thresholds for outdoor plastic doors

Plastic threshold	Aluminum threshold

Plastic thresholds are installed in low-traffic areas. It is characterized by greater tightness and thermal insulation.	Aluminum thresholds are installed in places with high traffic and have increased wear resistance

Plastic entrance doors are a guarantor of your safety

The strength characteristics of plastic entrance street doors should be high. To do this, the profile is reinforced with powerful steel profile, But it is not the only remedy ensuring security. On entrance doors Anti-burglary fittings and shockproof glass are installed from PVC. This makes them more durable and able to resist intruders.

Types of front door design

1. By type of filling

2. By decoration methods

Layout (spreads)	Stained glass	Lamination	Tinted windows

The Dveris store offers quality doors with free delivery within the Moscow Ring Road. The presented products are certified and accompanied by a manufacturer's factory warranty. We provide assistance in choosing plastic interior structures, perform their installation and service.

Among the entire range interior doors plastic structures attract attention due to its versatility, durability and immunity to external influences. Thanks to this, models with solid or glazed panels can be used in rooms with special temperature and humidity conditions. The doors are made in modern design and even in the absence of elaborate decor they will become a worthy addition to the interior.

Scheme of work

Types of plastic doors

Interior. They are often made with a high and wide sash, complemented by handles on both sides and a lock. Door designs fireproof, durable in use, easy to clean from dirt. Products are in demand for installation in bathrooms, swimming pools, winter gardens, living rooms etc.
Input. Unlike interior doors, these doors have reinforced hinges. The profile system is designed for a wide installation depth, and high strength is achieved through closed reinforcement. The models are not deformed by temperature and humidity changes; the presence of a special seal prevents the penetration of noise and unpleasant odors from the street.
Office. Door structures are manufactured with reinforced leaves and frames. These models are wear-resistant and designed for a large number of opening and closing cycles. The products are equipped with durable fittings and a seal around the perimeter of the sash to increase sound insulation properties.

Our advantages

Advantages of interior plastic doors

Durability and wear resistance. Even with intensive use, interior plastic doors serve for many years and retain their aesthetic appearance.
Moisture resistance. The structures are not subject to corrosion and can withstand even direct contact with water.
Resistance to deformation. Products are not subject to warping under the influence external factors, excellently withstand mechanical loads.
Functional fittings. With minimal maintenance of hinges and locks, the doors move smoothly and silently; if any extraneous sounds or signs of misalignment appear, the fittings can be adjusted.
Big choice constructive solutions. There are swing and sliding designs, accordion models and many others to choose from.
Tightness of the vestibule. Thanks to the sealing contour and tight joining of the canvas and the box, it is ensured effective protection premises from noise, drafts and heat loss.
Environmental Safety. The materials used in the production of structures do not pose a danger to human health and the environment.

To learn more about the benefits of interior plastic doors and order the models you are interested in, call the numbers listed on the website.

Today, the installation of plastic entrance doors no longer surprises anyone. Initially, these models were used for shops, public and administrative institutions.

Later they began to be installed on balconies and loggias. The same technology was used in the production of products as for the manufacture of plastic windows.

Pros and cons of metal-plastic entrance structures

Entrance systems and interior designs in the private sector, made of metal-plastic are a common solution. Modern metal plastic products have many undeniable advantages:

excellent strength characteristics;
low flammability;
good resistance to lime and alkaline or acidic compounds;
ease of care;
long service life;
environmental friendliness;
sanitary safety;
ability to withstand temperature changes;
presentable appearance;
high-quality noise and heat insulation;
excellent resistance to external influences;
availability of numerous design options;
budget cost.

Designs from modern material owners of private houses place them at the entrance and in utility rooms.

Entrance door arrangement - design with photo

For the entrance system, special PVC profiles. Each of them has stiffening ribs and 5 separate chambers filled with air.

Profiles can only be made of plastic or with additional use metal fittings. The individual elements of the door frame are connected together using metal components.

Modern technologies can give the frame any shape. In a private home, you can install an arched model, rectangular, trapezoidal or round.

The products are equipped with all necessary elements: crossbars, hinges, closers, locks. The multi-locking mechanism ensures a good fit to the door.

Design features, photos of the main elements of a plastic entrance door

The design of a plastic door includes plastic elements:

Box. This part is a profile frame. Used to strengthen and add additional rigidity. steel frame with corners.
The door leaf, which is profile frame, which is covered on both sides with sheets of galvanized steel. Between them there is material for heat and sound insulation. Separate parts of the door can be made of glass: armored and triplex.
Accessories. The products are equipped with deadbolt locks that ensure reliable closure.
Threshold. This frame element is made of aluminum or steel. Thresholds can be insulated or not.

Manufacturers produce models where the canvas is reinforced with steel liners that prevent free access to folds or locks.

Heavy doors that provide ultra-secure security should be installed where practical.

They weigh more than 100 kg, and therefore it is necessary that the walls are strong enough to withstand the load.

Materials for filling the door leaf made of plastic

The surface of the door leaf can be solid or transparent. In the first case, sandwich panels with steel sheets are used.

Transparent fill is basically combined option. A double-glazed window is placed at the top, and at the bottom door leaf make you deaf.

There are also models made entirely of plastic and glass. Glass used is stained, colored, frosted and corrugated.

Nowadays doors “like wood” and other textures are popular. The color range is presented a huge amount decisions.

The design of the doors may be different. There are single-leaf, double-leaf and transom models. For double-leaf doors, you can fix one leaf, usually smaller in size.

Manufacturers produce sliding and swing doors made of metal-plastic. The design involves the use of a push handle or an arc handle. Some products are equipped with closers.

Decorative design

Metal-plastic doors provide heat retention and excellent sound insulation. But in terms of safety, such structures are inferior to high-quality metal doors.

In terms of aesthetics and choice design solutions the structures look great with walls made of brick, stone or concrete. Metal-plastic doors go well with siding trim.