How to clean an acrylic bathtub at home? Tips for washing with improvised and special products. Care for an acrylic bathtub and cleaning products Care for acrylic bathtubs

How to care for an acrylic bathtub, including one with hydromassage? What household chemicals and home remedies should you use to wash your plumbing fixtures to increase their service life? How to remove scratches from the surface?

The content of the article:

Acrylic is a wear-resistant material, it prevents the proliferation of microbes, and the surface has a dirt-repellent property. However, despite these qualities, the bath requires careful regular care. To extend service life, keep appearance and the shine of plumbing fixtures, acrylic must be handled correctly. There are no particular difficulties in care and cleaning, the main thing is to follow all the rules. Let's figure out what you can and can't do when caring for an acrylic bathtub.

Positive properties of an acrylic bathtub

An acrylic bathtub is much lighter than a cast iron one, which is important during transportation and installation.
The material is flexible, so the bath can be different forms and sizes.
Acrylic sanitary ware is produced in any color.
The material has a heat-insulating property, so it remains in the bath for a long time warm temperature water.
The bathtub is durable, strong and not afraid of impacts.
The surface has a dirt-repellent property, which prevents the development of microorganisms.

Disadvantages of an acrylic bathtub

The material is easily scratched.
The bath is subject to mechanical damage.
Acrylic - polymer material, which is not resistant to high temperatures. Therefore, smoking and using hot devices (curling irons, curling irons) can deform the surface.
Maintenance must be regular and operation must be careful.

Acrylic bathtub care: what not to use

The main disadvantage of the material is the lack of reliable protective coating. Therefore, the bathtub is easily scratched, and when wrong choice cleaning products quickly fade. It is important to be careful when cleaning acrylic surfaces.

The coating cannot be washed with abrasive detergents, otherwise the shine will disappear and scratches will appear in which dirt will accumulate.
Solvent, ammonia, acid and acetone will cause unique harm to acrylic. The bath will become cloudy, and with prolonged contact it will corrode the acrylic.
For care, you cannot use chlorine-containing substances, since acrylic does not withstand chemical action. The use of chlorine will cause the surface to become cloudy.
It is undesirable to scrape the surface of the bathtub with hard, metal and sharp objects. This will compromise the integrity of the coating and damage the enamel.
Before using a cleaning product, read the composition: it should not contain alcohol, acetone, or ammonia.
It is not recommended to place metal buckets in the bathtub and bathe pets.
Never put in the bath various items: stools, metal basins and other household utensils.
Do not soak laundry in the bathroom long time, this will ruin the appearance of the plumbing.

Caring for an acrylic bathtub at home: the best remedies

The chemical industry has developed quite a lot of effective and safe means for caring for acrylic, which will preserve the original appearance of the bathtub for a long time.

To care for your bathroom, you can use liquid dishwashing detergents, liquid laundry detergents, liquid soap and shower gel.
Dry washing powder must be dissolved in water and treated with a soapy solution.
If streaks and yellowness are found on the surface, then it is not necessary to wash the entire bathtub. It is enough to moisten a soft cloth in table vinegar or lemon juice and wipe the surface.
To get rid of rust, use special products for removing rust from acrylic surfaces.
Remove a small stain with laundry or baby soap and wipe with a soft cloth.
If you are using a cleaning product for the first time, test it for small area: There are no changes, then feel free to use it.

Daily care of an acrylic bathtub

If you follow the basic simple rule, wipe the bath warm water with a soft cloth after each use, then the need to apply household chemicals will drop to a minimum. But there is not always time for daily cleaning. Therefore, you need to remember the main rules.

Immediately after bathing, rinse the bathtub with a stream of hot water.
Clean with detergent once every two weeks.
Once a year, disinfect your bathtub with a special acrylic disinfectant.
Alternative option: fill the bath with warm water, add 1.5 liters of 7% citric acid and leave overnight.
Before using your child's bath, clean the surface with regular soap and warm water.
To avoid the formation of smudges and rust on the bathtub, always tighten the taps tightly.
If there is hard water in the taps, then wipe the surface of the plumbing with a dry cloth to prevent the formation of plaque.

Caring for an acrylic whirlpool bathtub

The pipes and jets of acrylic hot tubs harbor pathogens. Therefore, to maintain hygiene and appearance, a number of measures must be taken.

To remove limescale, dial full bath warm water and add a glass of vinegar or a packet of citric acid. Leave for 10 hours and drain the water. Wipe the surface with a damp and then dry cloth.
Pour special disinfectants into the Jacuzzi filled with water above the nozzles and turn on all operating modes. After half an hour, empty the bath and repeat this procedure several times.
For acrylic bathtub With hydromassage it is most effective to carry out prevention. After each bath, drain the water and add fresh water. Turn on the hydromassage for 5 minutes and drain the water. Then no contamination will form in the pipes of the hydromassage system.

Removing scratches from an acrylic bathtub

Not only dirt can form on the surface of the bathtub, but also scratches that can be easily removed.

Polish small scratches up to 0.5 mm deep with a piece of felt without using special detergents.
Remove deep scratches using liquid acrylic. The repair kit includes a tube of liquid acrylic and a plastic spatula. Apply acrylic to the damaged area with a spatula, and after drying, polish it with a piece of felt.

If you follow all the above recommendations for cleaning an acrylic bathtub, it will last a long time and retain its original appearance. In the meantime, we suggest watching videos where they talk about proper care of an acrylic bathtub.

Baths are an essential attribute in every home. When you purchase an acrylic bathtub, two exciting questions immediately arise: how should it be cleaned, and how to remove scratches?

Most housewives are sure that to care for such a bathroom it will be necessary to purchase only special ones. of this material facilities. This assumption is erroneous in its own way, this opinion was instilled in the consumer by capitalists, they strive to sell their goods that are not needed at all. :)

In this article we will offer you answers to your questions, you will know: “How to properly care for an acrylic bathtub, and you will also find out which washing products can be used for cleaning and which are strictly prohibited.” In addition to everything, we will bring to your attention several secrets in the repair and minor breakdowns of an acrylic bathtub.

What can't be used?

One drawback of this item is the unreliable coating; one might say that the bathroom has practically no protection. This is why acrylic bathtubs are easily scratched and damaged by detergents. Acrylic bathtubs quickly fade and change color when using the “wrong” detergents.

What products should not be used to care for an acrylic bathtub:

It is strictly forbidden to use washing powders and detergents that contain fine abrasives to clean the bathtub. When small grains are present in detergents, they create scratches on an acrylic bathtub, and you can simply get rid of them at home, but it is better not to damage the bathtub;
Also, experts never recommend using chlorine to clean your bathtub. Often owners have a desire to disinfect the bath using this product. But you don't need to do this! If this happens and you still want to use chlorine or it is contained in any detergent, this will lead to the surface in the bathroom becoming cloudy. If repeated cleaning with chlorine is carried out, the bathroom will most likely become covered with small pores;
It is also strictly not recommended to use acetone and other solvents, all of which have a detrimental effect on the texture of the bathroom. And also if acetone comes into contact with an acrylic bath for a long time, this will lead to a hole appearing in that place. This is because the solvent will eat away at the acrylic;
If you use ammonia, the bath reaction will be the same as with acetone;
Formaldehyde is also prohibited from being used to clean the bath; acrylic does not accept this material.

Important points to consider

The most important rule when using an acrylic bathtub is to avoid the greatest contamination; everything must be done on time, so cleaning must be timely. After you take a bath, you need to rinse it off hot water, this way you take care of it and prevent large contaminations, which in the future need more and more attention.
With prolonged use of an acrylic bath, of course, small traces of contamination appear; they can be removed with a sponge and ordinary soap.

Little secret!!! If you rinse the bathtub with hot water, it will retain its shine and gloss for a long time.

When very noticeable traces of rust or limescale appear on the surface of the bathtub, then it is worth using by special means that will help you get rid of these unpleasant moments.

If you want to save money, you can use vinegar or lemon juice to get rid of unpleasant dirt.

Very important point!!! Any cleaning product that will be applied to an acrylic bathtub should be wiped with soft fabric or sponges. In this case, there must be no abrasive layer on the sponge, otherwise it may cause new scratches.

A little secret!!! If you are using a certain detergent, you should not immediately start complete cleaning baths, you need to try it on a hidden area of acrylic in order to check its properties and make sure that it will not cause harm.

Scratches can be removed!

Acrylic on its own unique material, which, in addition to being scratched very easily and quickly, is also easy to repair this damage. In order to get rid of these small or even shallow scratches, the size of which is almost a millimeter. You can use an ordinary piece of felt. Surprisingly, this method does not require any special product, paste or any other device.

When the scratch is very deep, it can only be eliminated with liquid acrylic. Moreover, you can do this yourself without calling a specialist and without paying a lot of money for repairs. All you have to do is go to a hardware store and buy a special repair kit, which will include a small tube of cream, as well as a special plastic spatula. Acrylic from this tube is squeezed out onto the damaged area and evenly leveled using a spatula, then polished with a piece of felt.

When repairing a damaged surface, the bathtub does not change its structure and there is practically no difference in color. This method of removing scratches is also suitable for eliminating through gaps in an acrylic bathtub.

In order to eliminate the gap in the bathtub, you will need to reverse side attach the tape, then fill the gap, liquid acrylic from a tube. If the through gap in the bathtub is located on the side of the bathtub, the repair will take a little longer, since several stages of surface restoration will be required.

Acrylic bathtubs come in two types: ordinary and hydromassage. If you have a hot tub, it requires cleaning not only the tub itself, but also the jets and pipes. Since they accumulate quite quickly great amount germs and bacteria that need to be fought. Stores sell special disinfectants for hot tubs. Chlorine is also not suitable in this case. If the consumer is attentive and has noticed that it still contains chlorine, but its content in this disinfectant is very small, so it is gentle on the acrylic bathtub and its components.

In order to clean the acrylic bathtub and all its additional elements For hydromassage, you need to fill the bath to a certain limit and turn it on in normal operating mode, while adding a disinfectant. This way the entire bathtub and its tubes with nozzles are cleaned. It will take no more than 20 minutes to clean an acrylic whirlpool bathtub. After it has been disinfected, you need to refill the bath clean water, this is necessary in order to finally rinse the nozzles and tubes of detergents.

Acrylic bathtubs are popular due to their hygiene, ease of installation and lack of corrosion. Such bathtubs require careful maintenance, since the material from which they are made has disadvantages. But there are also benefits . Caring for an acrylic bathtub is the science of cleanliness. Let's try to study it. Acrylic tanks have a good “life span”. They will last for more children, provided proper care behind their surface. To new purchase“has taken root” in your home, you need to know how to wash an acrylic bathtub

Features of caring for an acrylic bathtub

Note! Bathtubs made of this material require careful handling! They should not be washed more than twice a month with cleaning products. After each use, rinse the walls of the tank with cool water and wipe with a clean sponge. A couple of times a week, wipe with a sponge and soap, rinse the surface, then wipe with a completely dry cloth. Choose a fabric that is soft and clean.

The bathtub must be wiped dry so that not a drop of water remains in it overnight. And wiping the tank with a sponge every day is a guarantee that your purchase will not have any deposits. This material repels dirt and does not corrode like cast iron.

But if plaque appears, the tank is washed with cleaning agents, and not with soap and water. Because a bath is a hygienic place. If there is plaque on it, it is dirty.

How to choose a cleaning product?

Since the apartments in our country have installed comfortable baths made of acrylic, housewives are faced with new problems : How to clean an acrylic bathtub? Detergents used to wash old cast iron tanks will not work in this case. Acrylic products are not suitable for detergent compositions that contain:

chlorine;
acetone;
ammonia;
formic acid (or other acids).

An acrylic tank cannot be washed with boiling water. It is prohibited to use anti-plaque products containing formaldehyde. ammonia and other corrosive elements. This will cause damage and the bathtub will have to be removed or rebuilt, which is expensive.

Caring for an acrylic bathtub involves the use of special cleaning compounds. But which of them will be of better quality, and what do the manufacturers of these products offer customers? Using "either what" is not safe for your new bath. So which should you prefer? Here is a list of detergents and cleaning products, each of which fully corresponds to its purpose.

Convenient sprayer, delicate aroma of fresh grapes, easy cleaning - just what you need to quickly tidy up your acrylic bathtub

Detergent compositions will help qualitatively. Choose from the rating that suits you price category, and has a tolerable smell.

Effective cleaning products for acrylic bathtubs

Using cleaning products

Cleaning products are used only in accordance with the instructions for use. These are not abrasive products that are used to wash the surface “until victory”. These detergents and cleaning agents are used differently.

This gel is applied to the surface of the tank (if it is a spray, it is splashed along the surface).
It takes 10 minutes for the product to take effect.
Gently wash off the dirt using a sponge and a stream of warm water.
Rinse again with clean water and dry.

Sometimes all attempts to clear the stone from the bathtub remain in vain. Clear old bath impossible. Try updating your plumbing. These tanks are restored using the technology of applying a new layer of acrylic. will cost less than buying new plumbing.

It will be difficult to clean an old bathtub, only restoration will save you

Folk cleaning products

If you want to save money, then “home cleaning technologies” are also suitable. Western products are more effective, but they have an aggressive effect on acrylic. Traditional methods cleaning is cheaper. Let's give several ways.

using what is in every home? WITH soapy stains will cope easier. It's not as depressing as limescale. You can wash acrylic with a few drops of wine vinegar diluted with water. This mixture is safe, but it works no worse than other expensive care products for acrylic surfaces. Lime deposits are difficult to remove even with cleaning agents. But it is possible to get it out.

You will need to do the following:

fill the tank with warm (not hot) water to the top;
pour 1 -1.5 liters of vinegar;
After 10 hours, drain the water and rinse the bathroom with a sponge.

Another trouble that happens is rusty stains on the side of the bathtub from water flowing from the tap. It’s easier to monitor faucets and change them on time than to remove rust. An acrylic bathtub is not subject to rust. There are no other causes of rust other than leaking taps. But if this happens, how to deal with the pollution? How to clean a bathtub from rust?

To remove rust, use either special chemicals, or traditional methods, which do no worse than their Western competitors cleaners. Will help lemon acid, diluted in water in a ratio of 1:2. The secret to preparing the mixture is simple:

A glass of water with citric acid diluted in it is thrown into a bath of water.
Literally after 10 minutes the bath is washed out with water.
It is wiped clean.

Over time, the bathroom becomes yellowish . How to remove yellow stains from a bathtub? Yellow appears on the surface due to rust and salts that city tap water carries with it. This plaque cannot be washed off with abrasives or acid mixtures. You can wash off the yellowness with the same vinegar (9%), or diluted oxalic acid. It is advisable to heat the water in which you will dilute the vinegar or acid, but not too much. Since cheap acrylic does not tolerate high temperatures.

Most used folk remedies for cleaning acrylic bathtubs

Pollution prevention and disinfection

Acrylic high standard Guaranteed to last 25-30 years and looks like new. The acrylic bathtub just needs care and careful operation. Let us mention once again the rules of their operation. In an acrylic bathtub, you should never:

Soak and wash clothes.
Allow acids or alkalis to come into contact with the surface. No abrasive cleaners.
Bathe pets. They scratch the surface of the bathtub with their claws. The disadvantage of the acrylic bathtub surface is its softness and low strength.
Place any basins in the tank, be it plastic or steel, and wash clothes in them. This puts the tank at risk. Scratches will appear.

As long as you stick to a weekly bath cleaning schedule and don't allow any damage, she should be fine.

Before you put new bath, plumbers recommend carrying out more thorough repairs and changing water pipes for new ones. Then a yellow coating will not appear on the bathtub. Smooth surface is not subject to “attacks” of fungal diseases or corrosion. But it is advisable to carry out disinfection once a year.

It is not recommended to bathe pets in an acrylic bathtub.

How is disinfection carried out?

How to wash an acrylic bathtub so that there is no doubt that it is disinfected and not dangerous for bathing small children? For disinfection, one more product is needed - Ravak Disinfectant. Product from the Czech company Ravak. The company constantly checks its products for quality and ensures that they are safe to use.

The order is:

The tank is filled to the top.
The product is diluted in a ratio of 1:10 and poured out.
Stir and leave for literally 10 minutes.
Then rinse off with clean water and a sponge.

It is not used often, therefore, it is beneficial to purchase 1 bottle. It disinfects not only the tank, but also the entire bathroom. Ravak Disinfectant costs 600-800 rubles. for 500 ml. But remember, the product is highly diluted with water. After the disinfection procedure, you will be confident that the bathtub is clean and the acrylic is safe from bacteria.

To clean the bathtub from rust and deposits, you will have to purchase a bunch different means, and find the right one among them. After all, everything is learned in practice. Traditional methods of washing acrylic are also effective if there is no money for professional products plumbing maintenance.

Each of the products listed in the rating has both advantages and disadvantages associated with the composition of the substance. There is no optimal detergent composition. If you don’t find the ones listed in your nearest store, another product for cleaning acrylic bathtubs will do just fine. The main thing is to read the composition and make sure there are no chemicals in it: chlorine, ammonia or acids.

The main and almost the only disadvantage of acrylic bathtubs is caring for an acrylic bathtub: the coating is very unstable to micro-scratches. But, since sales of acrylic bathtubs are not declining, it’s worth figuring out how to maintain this magnificent bathtub so that you don’t feel painfully sorry for wasted money.

Meet the acrylic bathtub

Fifteen to twenty years ago, if it was necessary to change a bathtub, the thought of choosing anything other than cast iron did not occur to most users. But now a new product has appeared on the plumbing fixtures market. Bathtubs that are distinguished by their beautiful appearance: dazzling glossy white, and later all kinds of bright colors– from soft pistachio to ultramarine. And the ability to build in a hydromassage - you lie in the bathtub with bubbles all around. And, most importantly, these are, of course, shapes: drop, shell, round, with shelves, niches, seats...

In comparison with the laconic and familiar rectangular cast iron basins - what a riot of shapes and fluid plasticity. Yes, exactly plastics. All this sanitary splendor is possible only with an acrylic bathtub. To be precise, bathtubs are made of polymethyl methacrylate, or - the more common name - plexiglass. The popularity of acrylic bathtubs does not weaken; in addition to the obvious advantages - an attractive appearance, controversial ones have begun to be added - for example, low weight compared to cast iron and the ability to install it with your own hands, alone.

Coating features

Reference: Polymethyl methacrylate is produced in two ways: injection and extrusion. The material obtained by extrusion is less durable; its sheets, due to technological features production, thinner, and resistance to chemical influences is lower. But production is cheaper. For plumbing polymethyl methacrylate, material produced by both methods is used, and as a result, bathtubs made from extruded acrylic are cheaper. Another feature is that cast acrylic is more rigid and less easy to mold. Therefore, for the manufacture of baths with bizarre shapes extruded plastic is used.

What an acrylic bathtub is afraid of - a lot of things:

High temperature;
Boiling water poured into an acrylic bath causes its deformation; an accidentally dropped cigarette can melt a hole;
Mechanical scratches;
Clawed pets should not be washed in acrylic bathtubs. Do not use the bathtub as a basin for washing clothes: the surface can be scratched metal parts on clothes, and laundry detergents can be hazardous to acrylic;
Exposure to certain chemicals and compounds;

Substances hazardous to acrylic include:

dichloroethane - found in plastic solvents and aerosol insecticides;
chloroform - used in the pharmaceutical industry, for the production of dyes, pesticides;
methylene chloride - included in nail polishes and used for the production of instant coffee;
butanol alcohol - in paint and varnish products and solvents;
methanol alcohol - used as solvents;
ethanol alcohol - well, everything is clear here: medical alcohol, alcohol of all types, as well as kvass, kefir, kumiss, perfumes and cosmetics, including shampoos and toothpastes.

Important! This is just a small list of chemicals that are quite common in everyday life. And they can damage the delicate surface of the bathtub if it is accidentally spilled on it, or if it is used in an attempt to clean the surface of dirt. Carefully read the composition of household chemicals, or better yet, use special acrylic care products to clean acrylic bathtubs.

Fighting rust

The scourge of acrylic bathtubs is the yellow streaks left by water dripping from the tap. This is rust. How to care for an acrylic bathtub so that it's disgusting yellow spots didn’t spoil the snow-white curly sides? It is very difficult to combat it on the surface of an acrylic bathtub, which cannot be cleaned mechanically. Better preventive measures: water filters that retain, among other things, iron, and working faucets from which water does not leak.

Lime deposits

If your region has hard water, your acrylic bathtub will face another misfortune: lime deposits, and you will have to choose another acrylic bathtub care product that can cope with lime deposits on the walls of acrylic impatiens.

Scratches

As mentioned above, the surface of an acrylic bathtub is very easily scratched. Both large scratches and microscopic ones appear that are not visible to the eye. But the glossy shine of the surface of the acrylic bathtub, which was so seductive when purchasing, disappears very quickly. And microscratches are filled with dirt. But there is good news: The surface of acrylic can be restored quite easily. True, there is also a bad thing: this only applies to expensive bathtubs made of cast acrylic.

Disinfection

Plumbing acrylic is completely indifferent to bacteria and microorganisms. They don’t live on it, apparently because they don’t like it. Therefore, there is no point in specially disinfecting an acrylic bathtub.

The easiest way to maintain acrylic bathtubs is to wash them regularly after use. Then for cleaning you will not need to use harsh methods that can damage and ruin the surface of the bath. To decide whether to buy an acrylic bathtub, read reviews.

Perfectly clean plumbing is the desire of every housewife. However, when choosing at home, you should choose the right tactics. Otherwise, you can say goodbye not only to an unpleasant coating, but also to the plumbing itself. Therefore, we will consider at home and which products are completely unacceptable for this coating.

Rules of care

For regular preventive cleaning, you should use a soft sponge and a specially designed product (this at home will be discussed below).

The washing process is extremely simple. Initially, the surface must be moistened with water. After this, apply a cleaning agent to a soft cloth or sponge and wipe the bathtub. The surface must be rinsed with water and wiped dry. To make it shine, you can use wax polish.

The more often you resort to regular surface cleaning, the less often you will think about how to clean an acrylic bathtub from plaque at home. It is recommended to repeat this procedure once a week.

Prohibited means

An acrylic bathtub has many advantages. However, she also has one significant drawback- it's not high mechanical strength. Therefore, it is important to know how to wash an acrylic bathtub at home in order not only to ensure its ideal appearance, but also to protect the surface from damage.

Brushes with a metal or other hard coating.
which contain substances: chlorine, ammonia, acetone, formaldehyde, abrasive components.
Washing powders.

Products intended for cleaning acrylic bathtubs

For cleaning surfaces, it is allowed to use products that do not contain aggressive components. This will allow you to clean your plumbing quickly and easily.

There are also specially designed products for these surfaces. So, how to clean an acrylic bathtub at home?

Let's consider the most popular means:

"Acrilan". The substance acts on the surface very quickly and is quite effective. It removes mold, rust, soap residue, and plaque. Does not leave behind microdamages or scratches. After using this product, the bath is covered with a light protective film.
"Ravac." These are products that are used to remove grease, stains, rust, and scale. They perfectly disinfect surfaces.
"Acrylic Polish". An effective remedy, designed for acrylic surfaces. It is characterized by low cost.
"Tim-Pro." Modern remedy, which does not contain abrasive ingredients. It allows you to achieve crystal purity and does not leave scratches.
"Mr. Cheester." A fairly cheap solution that can effectively remove rust and plaque. In addition, this product has an antifungal and antibacterial effect.

Water Stone Removal

The main problem that arises for people who have installed an acrylic bathtub is plaque on the surface. However, eliminating it is completely easy. So, how can you clean an acrylic bathtub from plaque at home?

For removing water stone the following measures should be taken:

Draw in the bath warm water. Its temperature should not be higher than 30 C.
Add vinegar to the water - 0.5 liters. Instead of this component, you can use citric acid. You will need 1 pack per bath.
Stir the water with your hand. Leave the bath in this state overnight.
When you wake up in the morning, release the water. Be sure to wash the surface. Then dry with a dry towel.

Such measures are quite enough to get rid of plaque. But what if there is too much water stone and it was not possible to completely eliminate it? How to clean an acrylic bathtub at home? The cleaning agents described above will perfectly remove plaque. For example, Acrylan or RAVAK Turbocleane liquids.

Getting rid of yellowness

Such defects are completely unusual for acrylic surfaces. Yellowness often occurs in bathtubs made from inexpensive plastic that has a protective layer.

Initially, it should be said that such stains appear from poor-quality water or a sudden change in the temperature of the liquid. It is to such situations that plastic reacts by forming stains. In addition, it is very important that acrylic is always dry. It is absolutely unacceptable for water to stagnate in the bathroom. Be sure to check the taps. They should not drip water onto the surface.

We should remind you once again how to wash an acrylic bathtub. At home, cleaning products specially designed for such coatings will perfectly get rid of yellowness. You can use the substance "Acrylan". An excellent liquid is Tim-Profi. This product effectively cleans even very neglected surfaces. In addition, it perfectly disinfects the bath.

Citric acid will perfectly remove yellowness. It is recommended to dissolve 1 sachet in 1 glass of water. Apply the resulting liquid to acrylic surface. Then rinse it thoroughly. Your bath will become snow-white again.

Checking the tool

If you don’t have the necessary liquid at hand, you can use another one. However, how to choose the right one that will clean perfectly and will not harm the surface?

First, be sure to study the composition of the substance. The product should not contain aggressive components.

Next, to determine how to clean an acrylic bathtub at home, it is recommended to resort to a little trick. Apply your chosen liquid to a small area. Choose an inconspicuous area. For example, from the side. It is best to apply the product to the bottom of the bathtub. Leave for 20-30 minutes. After this, rinse this area. Carefully examine how the bathtub reacted to this cleaning product.

If no defects were found, then the liquid is completely suitable and you can begin the washing procedure.

Bath disinfection

Acrylic surfaces generally do not support the growth of mold and microorganisms. However, even they need regular disinfection measures. Therefore, when planning how to wash an acrylic bathtub at home, be sure to think about such cleaning. This is especially true for families with children. Is it necessary to expose the crumbs to additional risk?

Bathtub disinfection is a fairly simple activity that is recommended to be carried out once a year.

To carry out the procedure you need:

Fill the bath with warm water.
Add a little disinfectant to the liquid. You can use the above-mentioned Tim-Profi liquid. Stir the water.
The bath should remain in this state for 10-15 minutes. Then release the liquid.
Be sure to wash the surface. All remaining solution must be removed. Don't forget to wipe the bathtub dry.

Disinfection with chlorine

There is another method to clean the surface. However, you should be extremely careful with it. Because high consistency may damage the surface.

To disinfect with chlorine, use the instructions:

Fill the bath with water.
Add chlorine to it. The solution should be 7%. Watch the consistency carefully.
Wait a few minutes. Then open the drain.
Rinse the surface thoroughly and wipe it dry.

It is strictly forbidden to wipe an acrylic bathtub with a pure chlorine solution. Not only will it damage the surface, but it will also leave behind yellow, disgusting stains.

Caring for acrylic bathtubs is not particularly difficult. The main thing is to carry out all procedures regularly and use only those products that will not damage the surface.