DIY children's hanging chair swing. How to make a hanging chair with your own hands: hammocks, cocoons, rocking chairs from pipes with step-by-step instructions

Hanging chair - comfortable and unusual garden furniture designed for relaxing time in the fresh air. This device appeared in the 50s of the last century and in a short period of time became an integral part of the house, claiming to be a truly cozy home.

A beautiful “cocoon” can be used as a swing, a place to sleep or meditate. It is noteworthy that it is easy to make a hanging chair for your home or garden yourself from available materials.

Users often search:

Types of hanging chairs

Currently, there are several types of products:

With a rigid frame made of rattan and plastic. The structure is covered with strong fabric. Also, vine is used as a base.
With a soft frame (reminiscent of a hammock). The main difference is the size: the chair is smaller than a hammock and therefore takes up little space. This product adapts to the human body, which means it is comfortable to sit and lie in.
Cocoon chair. Distinctive feature This modification is 75% hidden internal space. This effect achieved thanks to wicker walls - macrame. “Cocoon” will appeal to those who love a secluded holiday, hidden from prying eyes.
“Drop” – as a rule, used in a children’s room. The chair looks like little house, sometimes equipped with doors. An excellent rocking chair for a child.

Making your own hanging chair

Making a comfortable hammock for a comfortable pastime is not as difficult as it might seem at first glance. First you need to prepare the necessary parts:

Metal hoop with a diameter of 90 cm.
A piece of strong fabric 3 m long, 1.5 m wide.
Braid, non-woven fabric or dublerin.
Eight meter sling.
Steel ring for mounting the structure to the ceiling.
4 iron buckles.
Sewing supplies, measuring tape and scissors.

Let's take a closer look at choosing a hoop. The following materials can be used as a supporting structure:

Gymnastics hoops. Aluminum and plastic are not suitable for this purpose, as they will not withstand the load of an adult’s body. Only steel models can be considered. The maximum cross-section of such a hoop is 16 mm, while to make a durable product you need 32 mm, which is twice as much (for a wicker chair this figure should be 40 mm). However, the gymnastic ring is perfect for children's version. The small cross-section is compensated for by multilayer filler.
Softwood. Such hoops are lightweight, but require careful processing, since moisture and heat contribute to the destruction of the wood.
Metal-plastic water pipe. Perhaps, the best option to implement the idea. PVC is a cheap and durable material. The hoop is made by rolling a cut piece of pipe into a ring. For fastening, parts made of wood or plastic are used.

The list of materials suitable for creating a hoop is not limited to the options listed. Everyone chooses the basis for the frame themselves - it all depends on their imagination.

Preparing the cover

Cutting the material for a hammock chair requires care and attention. When in doubt, it is better to leave a small supply of fabric; later it can be removed without any problems.

The principle is: measure seven times, cut once.

To begin, let's take a 3-meter piece of fabric and cut out 2 squares from it - each 1.5 meters long and wide. We fold both 4 times. In the corner in the center we mark a circle with a diameter of 65 centimeters. Draw a line along the marked points. Cut out identical circles from each square. Move 4 centimeters from the edge of the circle and draw a dashed line segment.
Cutting out squares
We put two holes on the first circle. They are designed for slings. Next, fold the fabric 4 times and iron it. We take the folds as guidelines. Two slings should have a slope of 45 degrees, the others - 30 degrees each. Having highlighted the corners, open the circle and iron it again. The result is axes indicating the slot points for the sling.
We select the necessary holes on all axes - rectangular figures 10 cm wide and 15 cm high. Y is marked in the inner part. The cut will take place along its contour. We fold the circles together, but in such a way that the threads do not overlap each other. Because of this, the case will be able to better withstand the load. Place the circle on top. Cut the marks on two circles at once.
We bend the ends of the cut holes onto reverse side. We attach braid around the perimeter of the figure or treat it with doublerin so that the material does not fall off. Next, cut through completely and sew along the edge, leaving 3 mm.
Bend and stitch the edges
Leaving the marked 4 centimeters at the edges, we connect the circles to each other, marking a slot for inserting the hoop. We cut the gap left so that we get teeth along the entire edge. Turn the cover right side out and iron it.
We cut out the filler into strips, then we cover the hoop (preferably in 2 layers). We insert the processed structure into the case. Moving the ring towards the edge, we sew all the circular parts at a distance of approximately 7 cm from the end.
Insert and sew up the hoop
Turn the edges of the unstitched cut intended for inserting the hoop inside out. We carefully cut off the allowances on the front side so as not to damage the correctness of the circle. We connect the edges and sew on a machine, leaving a few millimeters. We move the frame to the stitched end, baste the fabric by 7 cm.
Sewing the edges
The padding polyester mode is used through the slots and we move it inside the material, securing it with threads. Side holes seal with a hidden seam. Then we fix the cover on the hoop, stitching it along the verified 7-centimeter basting. After every 4 stitches we wrap a knot. Further rows are made at a distance of 7 cm from the previous one, so that the thick fabric can gather into soft folds.
Sling mode for four 2-meter segments. It is better to burn the edges over a flame. We insert the end into the hoop through the prepared slot. It is necessary to fold it so that a loop is formed. Using a needle, we cut and stitch. The algorithm is the same for all slings.
Attaching the slings to the hoop
We insert the end of each into the buckles, then into the ring and again into the buckle. Everything needs to be woven well to be able to change the height and tilt of the chair. The ring serves to collect the slings.

Pattern example

Hanging chairs are a kind of swing, cozy place for relaxation and privacy.

Making a wicker chair

The macrame technique allows you to create original products yourself.

Photo: egg-shaped wicker hanging chair - a comfortable place for reading books in the fresh air

This unusual structure consists of several circles woven together in macrame. For such an “egg” you will need the following parts:

2 metal-plastic rings with a cross-section of 35 mm. One for the backrest measuring 1.1 m, the other for the seat – 70 cm.
Polyamide 4 mm thread 900 m long. In the store, ask about the option with a polypropylene base, which guarantees strong knots.
Twelve meter slings.
2 thick ropes to connect the hoops.

It is worth mentioning that rings of a smaller diameter are suitable for the product, since the specified characteristics are the maximum for a chair. It is better to buy the thread of the required length immediately to avoid differences in color or quality. After preparing all the parts, you can safely begin work on creating the “egg”.

Any patterns are suitable for weaving the back. The cord is attached to the top. Work is carried out in a downward direction. On the lower hoop, the knots are tightened, and the remaining threads are collected into tassels. The design requires reinforcement with 2 wide cords connecting the seat to the back. Slings are attached to the finished product - and the “egg” hanging chair takes its well-deserved place in the summer cottage.

By making such a device, you will get a cozy corner for secluded relaxation and forget about problems and stress for a long time!

Hanging chairs that are last years settled in interior fashion, are unique inventions. They not only add coziness, add variety and fill the home environment with romanticism, but also serve as a functional piece of furniture. It’s not difficult to make a hanging hammock chair with your own hands; it will look especially relevant in a country house or on the veranda of a private house and will become ideal place for relax.

Wicker hammock chair on a rigid frame

Not the easiest to make, but the most comfortable are hanging hammock chairs based on a rigid frame. Most often it is an ordinary metal hoop, like those used for gymnastics. You can make a hanging hammock chair with your own hands in several ways from different materials, however, the most comfortable and easiest to make are hammocks made of macrame or textiles.

Fabric hammock chair

What you need for a hammock chair using macrame technique

If you master the art of macrame, then it will not be difficult to make a hanging chair that will create a unique, peaceful atmosphere on the veranda. In this case, you will not have to sew, because the entire structure will consist only of a frame and woven fabric, the pattern of which you choose yourself. To create a macrame hammock chair with your own hands you will need:

two metal hoops, the diameter of which should be different. For sitting, a diameter of 80 cm will be sufficient, for the back - 110-115 cm;
800-900 m dense rope material or polyamide cord for weaving;
12 meters of slings;
strong cords for fastening hoops;
a pair of wooden rods;
centimeter, scissors, gloves.

The art of macrame will allow you to create an elegant, graceful and comfortable chair

The most convenient and practical to use are hoops made from a metal-plastic tube with a cross-section of no more than 35 mm. It is such a hoop that can provide the entire suspended structure with the necessary strength. Make a tube hoop as follows:

Determine the length of the segment using a simple formula, based on the required diameter of the hoop: S=3.14xD. Since the outlet needs a diameter of 115 cm, the required pipe length will be 361 cm.
In the same way, calculate the length of the pipe for the second hoop. To connect the ends of the tubes when making hoops, plastic spacers are useful, which are fastened with ordinary screws.

To weave the back and seat of the chair, you will need ropes with a diameter of 4-5 mm with a soft surface or a durable rope with a polypropylene core - such material is sold in a building materials store. Its advantage is that when weaving, strong knots are created that do not “spread” as is the case with cotton threads. It is advisable to purchase the entire length of the cord at once, so as not to have to worry about selecting a material that is similar in texture and shade.

Hanging chair assembly instructions

Stage 1: Winding the frame. The surface of both hoops must be covered tightly, without gaps or sagging, with a cord, tightening it every couple of dozen turns.

Wear gloves when performing this work to avoid causing blisters or cuts.

Stage 2: Weaving the seat. Along the diameter of the smaller hoop, fasten the threads with the same distance between them, and then start making the pattern. The macrame pattern can be anything: you can give free rein to your imagination and skill if you are well aware of the macrame technique. Most craftsmen prefer the classic chess set. And the use flat knots This weaving will allow even a not very experienced “knitter” to make a hammock chair with his own hands using macrame.

Two-color “chess”, despite the simplicity of the pattern, looks very cute and original

Stage 3: Assembling the structure. Before you start decorating the back of the hanging chair, you need to fasten the hoops together. Do this by gathering and wrapping them at one end with a tight, strong rope. It is important to determine the length of the support rods: the longer it is, the deeper and higher the hammock chair will be. It is better to provide the ends of the rods with small cuts before fastening them: this way you will eliminate the risk of slipping and the structure will be more stable.

Step-by-step diagram of a macrame hammock chair

Stage 4: Weaving the back. You can weave it in any pattern, but it is better that it matches the way we weave the seat. They weave the back from above, going down to the lower hoop and fastening the ropes tightly.

Keep an eye on the elasticity of the weaving: the reliability and practicality of the design will depend on this

When you finish weaving and you still have free edges of the threads, if desired, form a fringe out of them. From the remaining ropes, weave strong cords for hanging the chair. The result is a practical, elegant, comfortable hammock chair that will decorate any interior.

Option for a frameless macrame hammock chair made of twine

How to install a wicker hammock chair

Think in advance where the hammock chair will be hung: whether it will be a wide branch of a tree in the garden or the ceiling. The suspension mechanism must be reliable, because it has to withstand the weight of not only the chair, but also the person sitting in it.

Crossbar – the simplest way hammock fasteners

If you plan to place a hanging hammock chair made by yourself in the garden, then you can purchase a wide and durable carabiner and hang the product on wooden beam. If the chair is made for the home, then ceiling slab make a hole and fill it with special chemical preparation made of polymers high strength.

After filling the voids in ceiling covering, secure a ring or hook in it. But you need to hang a hammock chair on such a structure after the solution in the ceiling has completely hardened - no less than two days after filling.

Example ceiling mount for hammock chair

On a veranda with a wooden ceiling, you can secure a hammock chair with your own hands: drilled hole a bolt mount made of high-strength steel is placed, from which the hammock will be suspended on a carabiner, hook or ring.

How to make a hanging chair from textiles

If you are unfamiliar with the technique of weaving macrame, do not despair. There are many options for how to make a hammock chair with your own hands, and one of them is a textile chair. To make it, you can also use a hoop, in which case an ordinary gymnastic hoop with a diameter of 90-93 cm will do. You can use fabric of any color, which will make it possible to decorate and add zest to the interior of the veranda.

Option for a frame textile hammock chair for the garden and cottage

Materials for a textile chair for a veranda

In addition to the hollow metal hoop for a textile hammock chair, you need:

about 3 meters of fabric of any color, but its structure should be quite dense (denim or thick cotton will do);
padding polyester for filling the fabric cover;
4 buckles, fastening ring for hanging;
braid or non-woven fabric - at least 3 m;
belt - about 9 m;
sewing machine and related sewing accessories: tape measure, thread, scissors.

To make a hanging chair, a hoop made from bent metal-plastic pipe. Some use bent wood, but this option is only suitable for indoor use: with temperature changes, the wood dries out and changes shape.

Technology for making a fabric hammock chair

First make the fabric base. From a 3-meter piece of fabric, make two circles, each 1.5 m in diameter. It’s easy to do this step by step:

cut the fabric into two even parts;
fold each one in four;
Marking the edge of a circle with a radius of 65 cm from the center, cut off the excess fabric.

Having made a pattern for the hole for the sling, cover the edges with braid or glue them with non-woven fabric

After reviewing the diagram, mark and make holes for the slings at angles of 45 °C and 30 °C.
After marking the space for the lines, straighten out the circles. It is better to work with both cuts at once, placing one circle on top of the other: this way all the lines and cuts will be symmetrical. Pins will help you make slits for the slings on both circles at the same time.
Sew a zipper into one of the circles in the middle, the length of which should match the diameter of your hoop.
Leave the zipper open.
After this, stitch the two circles together with the right sides at a distance of 1 cm from the edge.
Turn out the resulting cover and iron it.
Using pre-prepared strips of padding polyester, sheathe the hoop as tightly as possible, and then treat it with the same fabric from which you are making the hammock chair: this way its operation will be much more convenient and reliable.
Place the hoop into the resulting case through the zipper and close it. Using a strong thread, make a hidden seam around the entire circumference, framing the ring on the inside.

How to hang a textile hammock chair from a hoop

Divide the prepared 8-9 m of belt tape into 4 equal parts and thread it into the cells left for the slings. It is better to melt the ends of the tape with fire so that the belts do not unravel during use. Wrap the hoop in ribbon, fasten it and sew it with strong threads.

You can replace the belt with strong ropes, fastening them at the top with a ring

To be able to adjust the height at which you are going to hang the chair, as well as its tilt, thread metal or plastic buckles into the free ends of the belt tape. Collect all the slings into a single hanger (a special iron ring), which can be secured with a carabiner to the place for hanging the chair.

Note: a hanging hammock chair created by yourself will become even more beautiful, more comfortable and softer if you place multi-colored cotton pillows with padding polyester filling on it.

Quick options for making hanging chairs

You can make a hammock chair with your own hands in easier, faster ways from scrap materials. This is about soft structures, without the use of frames in the form of hoops.

Attach a couple of pillows to the hammock chair for a more comfortable rest

Place a rectangular piece of fabric, approximately 1.5 x 1.2 meters, in front of you.
Make slits on its sides every 7-8 cm: the cutouts will be rectangular, the width of each of them will be 4-5 cm.
Tape each cutout to prevent the fabric from fraying.
The protruding darts will be the fasteners of the chair, there will be 12-14 pieces in total. Wrap each of them tightly and secure with strong rope.
Tie the free ends of the ropes on one side and the other into one knot, make a loop and hang the hammock chair on two powerful carabiners or on wooden plank by drilling a couple of holes in it.

The most convenient way to hang such a hammock chair is using a wooden bar

On a square piece of thick fabric, mark a distance of 6-7 cm on both sides.
Fold the edges of the fabric over and sew a seam along the marked line using strong thread. These holes are needed to stretch and secure the rope on which the hammock chair will be suspended.
Pull a thick rope or strong rope through the holes made and close at the top with any of the convenient ways, described earlier.

In such a chair you will feel as if in weightlessness, on a soft airy feather bed

Make a hanging chair from a textile cover, filling it with synthetic padding and hanging it on chains with metal brackets to the ceiling.

As you can see, there are a lot of options for making hanging hammock chairs for home and garden. Which one to choose depends only on your preferences, imagination, talent and skills. The main thing is that the end result pleases with comfort, reliability and aesthetics.

Coziness, comfort, and peace in the house largely depend on the furniture. The strictest requirements are imposed on its selection. Furniture should be comfortable, safe, reliable. Also plays a huge role appearance, product style. Consumers prefer original products that are not similar to others. The most unusual item in the house can be a hanging chair.

Hanging chair shaped like half a ball

This is the most popular design trend in our time, although such a chair first appeared in the fifties of the last century. It's different amazing properties: rocks, calms the nervous system. And its role in design can hardly be overestimated! In this article we will look at detailed instructions for constructing such furniture from scrap, available materials.

You can make a beautiful rattan hanging chair with your own hands

Hanging chair on a stable stand

Light swaying stylish design, extraordinary appearance - all these are the undeniable advantages of hanging chairs. They are intended mainly for private homes. However, there are models made specifically for apartments. In the store, such furniture is not cheap. When you can’t afford the purchase, you can make it yourself. There are many advantages to such a solution.

Saving money. Most of The store price goes towards renting premises, brand fees, and staff salaries. The cost of the product is small. Why overpay? For self-made You will need available, cheap materials. Savings reach almost 90%.
Ease of operation. The process of making a hanging chair is quite simple. Any person can handle this job. The most important thing is desire, a little free time. The success of the result also depends on accuracy and responsibility. During the work process, you should scrupulously follow the step-by-step instructions.
Another reason for pride. Furniture created independently will become a special source of pride for the owner of the house. Not everyone can boast of such fakes. When inviting guests into your home, you can surprise them with your design talent.
Creation of a unique design. Standard furniture is quite boring, original designer furniture costs a lot of money. In this case, there is nothing better than making a hanging chair with your own hands. Its design, appearance, shape will depend only on the flight of your imagination. Such furniture will become an extraordinary interior decoration in any style.
Possibility to pick up optimal sizes products. In apartments and houses, the rooms are not quite standard size. Choose furniture for them in regular store quite problematic. The independent manufacturing process provides an individual approach.

Hanging swing chair can stylish decoration country house, an unusual addition to the interior of any room

We decide on the design and construction

Bedroom design with an original hanging chair

In order to spend a minimum of time on making a hanging chair, from it design features It’s worth deciding in advance. To do this you need to study the varieties possible designs, their features.

A chair with a rigid frame can be hung outdoors

Armchair with soft frame for a children's room

Let's look at the four main types of such chairs in the table.

Type of design	Features, advantages
1.Rigid wicker frame	Made from acrylic, metal, plastic, rattan, wicker. You can do it yourself if you have weaving skills. The rigid frame is covered with fabric and leather strips. The advantage lies in the universal design. Such furniture is suitable for an apartment, house, or cottage. Among the disadvantages are the complexity of manufacturing and high cost in the store.
2.Soft frame (analogous to a hammock)	This hanging chair looks like a regular hammock. The difference lies in the method of hanging. The hammock is mounted on two supports, the hanging chair is mounted on one. The design is very convenient during operation. Suitable for a children's room. May have a removable cover. The selection of similar products in the store is quite large.
3.Cocoon chair	Has a modern appearance. Fits perfectly into the Art Nouveau style. It features a rigid frame and wicker walls. Making such a design with your own hands is problematic. The main advantage is the ability to hide from the outside world. Wicker walls allow a person to privacy and relax. There is only one drawback - the high price in the store. But at the same time, the diversity of design is pleasing. In the store you can choose products for a room in any style direction.
4. Drop chair	An original design that allows you to bring originality to any interior. The teardrop chair is more like small house. This option is perfect for a children's room. It has large dimensions, making it possible to accommodate maximum comfort. During the day, in such a “house” you can play with toys, read a book, or play on the phone.

White hanging cocoon chair

Fabric drop chair - budget “tree house” for children and adults

Having decided on the shape, you need to start thinking about design details. It is worth choosing the color of the cover, pillows, and coming up with an original decoration. The color of the textiles should be in harmony with the colors prevailing in the room where the hanging chair will be placed. The hanging rope can be replaced with a chain. This solution will be relevant for rooms decorated in oriental style.

Hanging chair in the living room in oriental style

For children, the product can be decorated with blue ribbons and various marine ornaments. The child will be delighted!

Child's chair in nautical style

Necessary materials, tools

As you can see, a hanging chair can be built in different forms, from various types of material. You need to choose a design based on several important criteria: room size, own skills, interior style, financial capabilities. If you have skills in weaving, you can make a product with a rigid frame. It will last longer and can fit even into a city interior. An ordinary vine is suitable for weaving. However, the complexity of the work and lack of skills force us to abandon products with such frames.

Without the proper experience and skill, many people ask the question: how to make a hanging chair with a simple design? The easiest way is to make a product from an ordinary hoop. An ordinary iron hoop can be found in almost any home. If you don’t have it, buying such a product in a store is not a problem. It is inexpensive and comes in a wide range of sizes.

The most important thing is to find a hoop of suitable diameter and cross-section. The cross-section of the pipe should be at least thirty millimeters, the diameter should be about a thousand millimeters. For a small room, you can choose a hoop with a smaller diameter. Also, for a hanging chair you will need three pieces of fabric. The fabric should be durable, soft, beautiful. Two cuts measuring 1200x1200 mm, one 200 mm wide, 4000 mm long. To match this fabric you need to choose fabric for pillows. It can be brighter and have an interesting pattern. You should also prepare: synthetic padding, a durable nylon cord, two carabiners, rings for hanging, a zipper (length 1000 mm), a border for processing cutouts. You will need a few tools: thread, needles, sewing machine, scissors, tape measure, marker.

Materials and tools you may need

Step-by-step instruction

The following instructions will help you make a hanging chair with your own hands.

Prepare everything you need. To work you will need big table, some free space, additional lighting. Place all materials and tools listed in the previous section nearby. Proper organization of the workplace will allow you to do everything much faster.
Lay the fabric for the cover on the table. Place the hoop on it in the center. Using a tape measure, mark a circle 250mm larger than the circumference of the hoop. The easiest way is to put the dots, then connect them with a marker. Cut a circle along the resulting line. Next we use the second piece of fabric. Cut out another circle with the same circumference. These are the main elements of the future case.
We spread the fabric on the table, and then place the hoop on it in the center

Mark the circle with a marker and cut out a circle from the fabric along the marked line.
Fold one circle in half and cut. You need to attach a zipper to the central size line. Step back 250 mm from the edge of the cut and secure the lock. Once the lock is securely stitched, you can sew the cover around the circumference. Next, turn the workpiece inside out and carefully lay it out on the table.
Ready-made elements of the future case

Fold one of the cut out round pieces in half and then cut it

We attach the zipper, and sew the two halves of the cover around the circumference
Make markings for the cutouts. To do this, place the finished cover on the hoop. Determine the cord attachment points. Make four cuts. To make them look neat, trim the cutouts with braid.
We mark the product according to the drawing
Start preparing the hoop. In its original form, the hoop will be too rigid. The hoop should be wrapped in padding polyester. First coat the surface with glue. This will ensure reliable fixation of the material. Next, cover the hoop with fabric. This can be done manually.
We wrap the hoop with padding polyester

We cover the hoop wrapped with padding polyester with fabric
Insert the finished hoop into the case through the hole with a zipper. Fasten the zipper. The seating base is ready. Now you need to start fastening and fixing the cord.
We insert the trimmed hoop into the case through the hole into which the zipper is sewn
Cut two cords of 2200 m, two - 2800 mm. They are the ones who will hold the seat. Fold each cord in half and tie the ends. Pull the tied ends of the cord through the hoop and into the loop. Tighten.
Cut the required length of cord, fold it in half, tie the ends together

Attach the cords to the hoop
Create a ceiling mount. This is a job for men. Buy a powerful anchor with a hook, make a hole, secure the hook. Attach rings to the cords and hang them on a hook. The whole job will take no more than twenty minutes. The most important - ceiling surface must be strong. The load will be heavy - about 120 kg.
Finished chair hanging outdoors

Securing the chair with an anchor

Decoration

The most the best decoration hanging chair will become an unusual cover for the hoop. It can be sewn from inexpensive fabric of one tone, or you can use exclusive fabric with a bright design. Many people make covers from different scraps. However, then it is very important to monitor the strength of the seams. Bright pillows will be an excellent decoration. They are easy to sew yourself. You will need several parts to get the job done.

Fabric for pillows. The size is arbitrary. Depends on the dimensions of the seat itself and the personal preferences of the owners.
Sintepon. The simplest, inexpensive filler. If you wish, you can choose another, more environmentally friendly one.
Sewing accessories, machine.

It is better to make pillows with a removable cover. Then the cover can be washed when it gets dirty. To do this, first the base of the pillow is sewn, filled with synthetic padding, then the cover itself with a snake is made. Pillows can be decorated with fringe and beautiful lace. There are a lot of ideas for decorating pillows. They can be viewed on the Internet.

The seat itself can be decorated with bright ribbons. This idea is especially relevant when decorating a children's room for a girl. Bright pink and red ribbons will make the interior item more original and attractive. Don't forget about the cords. Cords can also be decorated using various details: stick butterflies, decorate with beads, bright textiles.

Video: Miracle! DIY hammock chair. Easily

50 original models of hanging chairs indoors and outdoors:

During the warm season, almost every city dweller dreams of getting out into nature and spending at least a few days, or even months, there. Outdoor recreation is necessary for every person, and it is very important to have a comfortable hammock or chair for this. A hanging chair that can immerse a vacationer in childhood is considered very popular. After all, all children love to swing on swings. But since the cost of this piece of furniture is quite high, skilled craftsmen learned how to make it ourselves.

The right approach to the matter will help you create a product no worse than those sold in stores.

Varieties

The first hanging chair appeared in Denmark in the mid-twentieth century. This designer furniture is most often used to furnish garden plot and less often for apartments in megacities. Unusual design in combination with a variety of materials makes this piece of furniture in demand among many buyers.

A hanging chair is comfortable spot seating material, which is usually made from natural or artificial materials such as wicker or rattan. The product itself is either suspended from the ceiling or installed on a special stand so that you can swing in the lounger. It is also called a rocking chair or swing chair, because their main purpose is to rock a person.

The interesting thing is that such a product can withstand very heavy weight. Therefore, a mother with a child or two teenagers can easily relax in it. The main thing is that the size of the furniture allows it to accommodate more than one person.

Hanging chairs can be divided into wicker, fabric, hard and soft, and they differ in shape and material. These products are designed to swing in different sides. There is only one type of hanging chair that does not move diagonally or back and forth. It is attached to the floor and ceiling, and therefore can only rotate in a circle.

The frame of the product can be made of various materials. Hard ones are made of rattan, wicker, metal, acrylic or transparent plastic. And to soften the product, it is covered with a soft blanket or a synthetic padding mattress is placed inside. Sometimes the base is covered with thick fabric, and small pillows are placed on top.

The hammock chair has a soft frame, as it is made of a fabric base, which is suspended from the ceiling.

Also, the hanging chair can be divided according to purpose. For example, a garden product is intended to be installed outdoors, and therefore its material must be moisture-resistant. But the children's product should be small in size and have a soft seat.

Types of construction

There are many models of hanging chairs, and each of them can complement a garden plot or apartment. Making furniture with your own hands has a number of advantages over purchased goods, because they allow you to show your imagination and make sure of its quality.

The complexity of the work depends on the design of the product, and therefore it is worth familiarizing yourself with all types in order to make a choice.

Hanging swing

These unusual chairs can be made from different materials. The design itself is lightweight and reliable, and most importantly, it can have both a soft and hard base. A swing can be used to decorate a cottage, sleeping area, children's room, attic or playground. You can make it yourself using strong ropes and thick textiles.

Wicker cocoon

The cocoon chair, or egg, is one of the most popular models. It differs from other products in the presence of walls that hide almost the entire internal space. It is usually made from natural or artificial rattan, and sometimes they use a vine. This design will appeal not only to adults, but also to children. After all, in such a cocoon you can find solitude.

Nest chair made of hoop

This model is interesting because to make it you only need an iron hoop, which needs to be braided with strong yarn. The structure itself must be suspended from the ceiling with strong ropes. The nest can fit in any room, even a small room.

The variety of models also provides a method for attaching the base. A hanging chair can be attached to the ceiling, or it can stand on a stand. The choice of fastening depends on the characteristics of the room and the personal preferences of the owner.

The material for its manufacture also depends on the type of product chosen.

So, to build a swing you need to prepare thick fabric, strong ropes and wooden blocks. And if the product involves weaving, then willow, bird cherry and rattan twigs are suitable. They should be flexible enough to be woven by hand.

To make a nest chair, you will need an iron or plastic hoop that has sufficient rigidity. And to give a unique style, it is important to use wear-resistant fabric, foam filling, laces for weaving and wooden boards.

Much depends on the weaving technique. One of the most famous is the macrame style, which involves intertwining knots of rope or ropes. With its help, you can achieve a sophisticated look for the product.

To ensure the reliability of the base, the patchwork technique is used. For this patchwork bedspread attached on top of the base material.

The base of the product can be knitted with strong yarn or laces. Weaving from multi-colored laces will look especially beautiful.

An openwork pattern can be created using the tatting technique. Such a product will seem weightless and light, which will undoubtedly attract the attention of guests.

When choosing a material for weaving or creating a base, you need to take into account its characteristics. After all, not every material is strong enough to support the weight of an adult. It is also important to select strong fastening elements so that the structure can withstand the weight of the person sitting and not break.

How to do it yourself?

There are many drawings and step-by-step instructions for making this type of furniture yourself. But the simplest is the swing chair, which will appeal to both adults and children.

To make it you will need two meters of thick textile, a thick meter-long wooden stick, a drill, carabiners, a strong cord, reliable threads and paint.

Performance:

First you need to take the fabric, fold it in half, measure 18 cm from top corner and draw a diagonal to the lower right corner. You will end up with an uneven triangle that needs to be cut out and removed. The main part of the fabric needs to be unfolded and the sides of the cut are sewn, while picking up their edges by a centimeter.
Next you need to create pockets for the laces. The edges of the long piece need to be folded 3 cm and stitched on a sewing machine.

On wooden block you need to make four holes, two on both edges. The distance between two holes should be 4.5 cm, and the distance between the central holes should not be less than 75 cm. The laces must be inserted into them and secured with strong knots. You also need to make a knot in the center of the rope so that a loop is formed on top, which will then be hung on a hook.

The hanging pieces of cord must be passed through the fabric and pass through the holes in the stick that are located along its edges. Then you need to make knots for secure fixation.
You need to attach two connected carabiners to the ceiling hook, you need to thread the cord into the lower carabiner. This way the structure will gain sufficient strength for safe rocking in the chair.

You can decorate the resulting product with decorative pillows with a bright print. It is ideal for the street if you place it on the veranda or under a large tree.

Another one interesting model for self-production - a drop. To do this, purchase about 500 rattan rods, a steel hoop, several metal pipes or strong ropes, which will be woven together in the shape of a circle. Then you will need PVA glue, strong rope, cord and chain.

Stages of work:

Before starting work, you need to calculate the size of the drop. Then you need to peel the rattan rods from the bark and cut them into equal pieces. To give good flexibility when weaving, the rods need to be steamed and beaten.
The furniture frame can be made from polypropylene pipes, metal or a slightly compressed hoop to obtain a semicircular shape of the product. If a pipe is used for the frame, then its ends must be fastened with special fasteners. In the future, you will need to attach rods to it, the length of which should be 30-40 cm higher than the product.

The rods are attached to the base so that the distance between them increases evenly, until approximately the middle of the product, and then so that this distance decreases. To give the chair its shape, the rods must be bent during the weaving process.
To secure the rattan, its rods need to be bent through the hoop several times and secured their ends with strong ropes. Next, the structure needs to be intertwined with thin rods, starting from the bottom and ending at the top. To give the product additional strength, all fastening points must be lubricated with glue.

You can lay a thin blanket or put a large flattened pillow in the finished chair.

Necessary materials

Depending on the selected type of product, you may need various materials. First of all, you need to prepare those that will make up the structure of the hanging chair. These can be pipes, hoops, rods, ropes or bars. If you are making a swing chair, then you only need durable and wear-resistant fabric.

It is important to decide what the filling for the bag that will be in the chair will be. After all, being in it should be as comfortable and safe as possible, so it is better to purchase padding polyester or foam rubber. But a foam pillow will not be able to transfer moisture, and therefore it is better to use this option in the house.

A hanging macrame chair is the dream of many, young and old. Therefore, it is not surprising that there are now a great many offers on the market for the sale of such chairs. And you can always buy a ready-made hanging chair, handmade, of course. But the price of such a chair is sometimes shocking.

Don't have any extra money? Do you have a couple of hours of free time in the evenings? And you really want to have your own cozy rocking chair? So why not weave a hanging chair using the macrame technique with your own hands. This way you will get a truly exclusive chair, in the color and size you want, and most importantly, cheaply.

Before proceeding directly to the master classes on making such chairs, let’s make a reservation: a finished hanging chair can be attached either to the ceiling in an apartment or to a special support in the yard at the dacha. We will discuss ways to hang such chairs in more detail in a separate article.

DIY round hammock chair detailed master class

So, let's start the first master class on weaving round chair hammock, with step-by-step photo instructions and additional diagrams.

When I say round, I mean the seat of the chair, but its top somewhat resembles a tent.

As a matter of fact, it is more convenient to start weaving a chair from the seat. In the future, connect the finished seat with the back, add fringe if desired, and you can admire the result. But first things first.

Necessary materials:

polyester cord (D 4.5 -5 mm, 800-900 meters);
gymnastic ring (D 17 cm, thickness 2-2.5 cm);
steel gymnastic hoop (D 90 cm);
hook No. 8-9, scissors, tape measure.

We weave the chair seat

As I mentioned, let's start with the seat. To begin with, I suggest you familiarize yourself with the simplest, in my opinion, version of weaving “net” or, as this technique is usually called in macrame: “Chess of flat knots”. We will discuss other options in the future.

The photo of the instructions shows a diagram of weaving a double flat/square knot and a mesh of them.

In addition, for those new to macrame, I am attaching a video tutorial with detailed explanation how to weave a network of square knots.

For such a seat you will need a large steel hoop (aluminum will bend) and about 96 meters of cord.

The cord should be cut as follows:

8 threads of 6 meters;
4 x 5.5 m;
4 x 4.5 m;
2 x 4 m.

In terms of the length of the cord it turns out: 48+22+18+8=96 meters.

In photo No. 3, I marked each cord with a certain color so that it would be clearer to you where each one ended up on the hoop (I think in the future it will become clear to you why we cut them to different lengths).

So, first we attach the longest ones (these are 8 pieces of 6 m each) in photo 5 point - they are marked green. We tie them in pairs at a distance of 6 cm from each other.

Please note that the cord is folded in half and secured with a special knot - it is shown in photo No. 4. And in the addition diagram, which is presented just below with a separate photo: there are four fastening options. Which option to use is up to you. The main thing is that in the end, from one cut 6 meters: you get two working threads 3 m long.

The tied ropes must be fixed (so that they do not slip). To do this, in each pair (which is 4 threads of 3 m each) we knit a square knot - pattern No. 6.

From tied threads we weave a checkerboard net (video lesson above).

A few words about mounting: the photo below shows the promised four options. These are regular fastenings with a lock either on the face or inside out, and extended fastenings also on the face or inside out.

Why pay attention to them? If in the future you don’t want to spend a lot of extra rope on wrapping the hoop (so that it doesn’t peek out), and don’t dream of a chic fringe. It's better to use an extended mount - this will hide a little more of the hoop.

The second thing I want to draw your attention to in this version of weaving a seat for a hanging chair: the outer threads (2 x 4 m) are tied to a hoop - they are highlighted in yellow in the diagram. Well, in fact, she schematically gave examples of how you can tie them to a hoop.

We weave a hanging macrame chair

We cut 20 threads of 10 meters each (i.e. cord consumption - 200 m).

We fold each rope in half and tie a knot in the middle (in the work, 20 threads of 10 m each will again turn into 40 of 5 m each).

We focus on the two threads on the sides (remember that one thread is two working threads). Accordingly, it turns out that we have two threads on the left and 2 on the right (they need to be highlighted somehow - alternatively, wind their ends).

We divide all the cords in half in the middle (for convenience, throw them over the door). We are working with the first part: 20 ropes, 2 of them with windings (one on the left and one on the right, respectively). Using these threads we weave 12 square/double flat knots (the bulk of the ropes are braided with four selected ones). At the end, tie the threads with windings in a knot (pictured No. 3).

Then the knots tied in the center unravel, unroll the work No. 4 and weave 15 more knots.

Next, we connect the edges (we form a loop - No. 6) and continue to braid 38 with the same two cords. Now it is better to hang the loop on a carabiner or, if there is none, on a belt, etc. We weave 3-4 knots and tie these 2 threads with windings in a knot, dividing all the ropes in half.

Now pay attention to point 8: unfold the loop as shown in the photo, find two ropes with wound ends and make them the middle of a square knot. Those. this time they tie up. Next, we weave 4 square knots sequentially in a row.

And again we take two threads with wound edges (the remaining two) and tie them too. From the remaining threads we tie 4 more knots - the result should be a row of 10 square knots (40 threads / 4 per knot = 10 knots).

We knit a couple more rows in a checkerboard pattern and tie the ropes to a small ring.

Cords with wound edges are marked in red (No. 16).

No. 17 we start weaving slings.

They will hold the hanging chair in front. For them you need to add ropes: cut 8 by 6 meters (consumption 48 meters). We tie them with an extended knot No. 19.

We tie 4 in front, and 2 on the sides. We knit a series of square knots and divide them in half (we need two slings).

We work with the first one: we knit a couple more rows of double flat knots (in the end we get 3 rows of knots), retreat 10 cm and knit 3 rows again and repeat until you get the desired length. Weave the second line the same way, try to keep them symmetrical.

If you already know where your beautiful chair will hang, do it because it will be more convenient for you. Please note that when loaded, polyester cords will stretch a little - i.e. the seat will lower by 10-20 cm.

At this point, the slings are ready; all that remains is to tie them to the finished seat.

No. 24 we weave the back of the chair using the macrame technique.

We will again need additional threads, we cut 16 by 9 meters (this is another 144 m). We tie them to the ring, 4 in the back in the middle, and 2 in the remaining intervals (I drew a diagram below so as not to confuse you in these additions, so don’t be alarmed).

We move the threads with windings towards the slings; in photo No. 25 they are marked in blue. Just tie them with rep knots (shown schematically No. 27).

Promised diagram of added ropes. I drew them according to the number of “cuts”. We remember that after tying to the base they “turn into two”.

Those. 8 threads of 6 meters = 16 threads of 3 m; 16 threads of 9 meters = 32 of 4.5 m.

We tie the slings to the seat of the chair at a distance of 77-80 cm.

And we proceed to the actual weaving of the back. You can choose the pattern yourself, whatever suits your soul. Let me draw your attention to the first row of nodes. In the diagram below I have already drawn the specific number of threads that is obtained at this stage.

In the first row you get 13 knots, if you knit the second with a checkerboard, you get 14, etc.

The wide, beautiful openwork back is the main highlight of the macrame hanging chair. Accordingly, the wider the back you need, the more threads you add.

This version includes:

4 threads - 7.50 m each (30 m);
4 - 7 m each (28);
4 - 6.50 m each (26);
4 - 6 m each (24);
4 - 5 m each (20).

In total, an additional 128 meters were woven.

Adding threads to the back is demonstrated in photos No. 37-39.

Finally, along the edge of the design at the bottom, pass a couple of rows of flat knots or secure the design next to rep knots.

Tie the finished back to the hoop from the middle (pulling it evenly, symmetrically to the center, tie the side threads).

At the finish line, we conjure over the fringe, additionally cut the threads for the front 160 cm, for the back 180 cm. Tie them tightly until the gaps on the hoop are completely filled (and of course, do not forget about symmetry).

We will weave the skirt together from additionally tied ones and from the ones hanging from the back, slings and seat. By the way, at this stage you can cut off the excess (if any) and use it to create a skirt.

Simply tie pieces of sufficient length to the hoop; short pieces (in case of shortage) can be “soldered”. Heat the edges with a lighter and quickly connect both ends. Use soldered threads only in fringes that are not under load!

If there is enough cord, then run 150 - 200 meters onto the fringe.

Another important point: before weaving a particular pattern on the skirt of your chair, you need to “fasten” the threads. Alternatively, first weave a brid or a couple of rows of flat knots. And then, with a calm soul, weave your pattern; you can also complete it with a brid. We trim the fringe threads evenly and admire the hanging chair made by ourselves.

Such a chair will withstand a hundred and something kilograms, the main thing is that the fasteners can withstand it.

Let's summarize the thread consumption: seat 96 m + base 200 m + slings 48 m + back 144 m + additionally 128 m woven into the back + fringe 200 m = 816 meters.

Tell me, did you change the threads there, adding extra ones? Even the same “knitter” cannot have two identical chairs. It is better to cut off the “extra” than to redo the entire chair due to a lack of them. In addition, excess trimmings, as I already mentioned, can be used in the fringe of the hammock chair. Experiment - come up with your own patterns, you will definitely end up with a beautiful macrame hanging chair.

A couple of ideas on how to make a chair seat differently.

Here the seat is crocheted, more details about it in the master class presented below.

The second option for weaving a hanging chair

This option of weaving a macrame chair can be called economical in comparison with the first. The first chair took 800-900 m, but this is only 400. Accordingly, you will weave such a chair faster.

We begin again to make a hanging chair from the seat. In this version it is crocheted. Crochet a round napkin, then tie it to the hoop (using the same hook - do not cut the thread).

In this option, it is better to wrap the hoop with twine in advance.

We begin to make the loop in the same way as in the first version. I signed everything in detail in the photo instructions.

The threads used to weave the square knots are marked in blue and green. As a result, they securely hold the seat: two in front and two in back.

There's really no need to go through the trouble of coming up with a complex pattern for the seat of a hanging hammock chair. After all, it will still be covered with a pillow or feather bed. But a beautiful skirt with fringe will significantly improve the appearance of your chair.

Well, I prefer the “solid” back of macrame chairs; a mesh of double flat knots is prettier when there is a small distance between them and a lot of ropes are involved. But that's up to you to decide.

Please note that you can not only modify macrame patterns, but also the very basis of the design of your hanging chair. Add a circle on top of the same diameter as the seats and you have a great mini hanging tent.

You can completely abandon the round base.

Macrame hanging chair with short back

From two hoops of different diameters you can weave a cozy hanging chair with a low back.

Load-bearing twisted chains can be woven into the back of the chair.

Or you can attach them purely to the hoops.

In addition, you don’t have to connect the hoops end to end at the front.

Or this kind of modernization.

It’s true that you can do it with just one hoop. unusual chair DIY round hammock, video master class for inspiration.

And one more example for inspiration (this time without a hoop). This chair is made with wooden seat. Why not?

The fastest and cheapest way to make a hanging hammock chair using the macrame technique

How to quickly and inexpensively weave a hanging chair using the macrame technique? I show the final, simplest option.

Here you will need to do wooden base, and then weave the familiar network of square knots. All steps are demonstrated in detail on step by step photos instructions.

The result is a beautiful macrame hammock hanging chair.

That's it, our selection of master classes on how to weave a round hanging macrame chair with your own hands has come to an end. For inspiration, don't be afraid to experiment!

By the way, before you start weaving such chairs, take a look at ours - there are very decent options that will surely appeal to someone.