How to build a brick fence with corrugated sheets. Fence made of brick and corrugated board: features and choice of material, stages of construction

A fence made of brick and corrugated board is one of the most durable types of fences. Clients have the opportunity to choose different color schemes for the fence and combine the fence with the general landscape of the site and the architectural buildings on it.

Fans choose it for its ease of maintenance, durability and laconic design. Caring for a combined brick and corrugated fence is simple – just wash it with a garden hose. No coating with any anti-corrosion mixtures is required. Thanks to special assembly technology, in case of damage, structural elements The fences are very easy to replace. Galvanized corrugated sheeting compound element fence allows you to confidently declare that the fence is resistant to high and low temperatures.

A fence made of brick and corrugated board looks very elegant, although in operation it does not cause much trouble for the owners. The most popular shades of corrugated sheets are dark green, cherry and brown. These colors go well with brickwork, the fence gives the landscape a unique charm.

You can choose corrugated sheeting with one-sided or two-sided painting. On small ones summer cottages One-sided material looks good, as it visually makes the space larger. And if the profiled sheet is stylized as wood or stone, then it turns out classic fence, capable of decorating any landscape design.

Main design elements

A corrugated fence consists of the following structural elements:

Metal support posts round or square section. Choose different sizes - from 60*60 to 80*80 mm. The pillars are equipped with special plugs on top so that snow or rainwater did not get inside the pipe.
Profile pipes standard section 40*20 mm.
Profiled metal sheets made of galvanized steel with polymer coating.
Fastening elements. Usually self-tapping screws are used, the color of which is matched to the color of the corrugated sheets.

Brick pillars are installed on a pre-prepared strip or strip-column foundation. A profile pipe is placed at the base of the brick pillar. At the proposed installation locations of the pillars, holes are drilled at a distance of approximately 2.5 m. Using the foundation, the fence is combined into a rigid monolithic structure.

Prices for fences made of brick and corrugated board

The price of a fence made of brick and corrugated board may vary depending on its design and external characteristics.

Fence cost made of corrugated sheet S-20, brick pillars on a strip foundation Price per 1 m.p. with material and work (rub.)
Height (meters)	Smooth brick	Brick RUST
one-sided polymer coating
1,8	9 100	9 250
2,0	9 650	9 820
2,5	11 600	11 750
3,0	14 850	15 000
double-sided polymer coating
1,8	9 170	9 350
2,0	9 740	9 890
2,5	11 680	11 870
3,0	15 000	15 350
logs - metal pipe 40x20x1.5 mm self-tapping screws with rubber press washer frame primer

Cost of one brick pillar with a cap with materials and labor (rub.)
Height (meters)	Smooth brick	Brick RUST
1,5	9 000	10 000
1,8	10 000	12 000
2,0	11 000	13 000
2,5	13 500	15 500
3,0	16 000	18 000
metal pipe 60x60x2 mm metal cap in the color of the fence

Prices may change due to ongoing promotions and market volatility.

A fence made of corrugated board and brick is one of the most popular design options. Reliability is ensured by stiffening ribs of metal sheets. The combination with brick allows you to create an attractive fence around the site, especially if you choose. In addition, the installation price is quite reasonable.

Calculation and design

The most preferable option is a fence with a strip base. This solution has several advantages: creating a barrier for rainwater, which under normal conditions easily penetrates the site; providing more high level strength and durability.

If desired, you can make a foundation different widths under pillars and corrugated sheets, which will reduce the cost of building materials (concrete mix, reinforcement). Reducing construction costs can be achieved in another way, for example, if a fence made of brick and corrugated board along its entire length is characterized by a single small width. Then the racks should be smaller in cross-section.

You should pay attention to the area itself. If there are differences in levels, it is necessary to build a foundation different heights in areas where the rise is most noticeable. First, markings are made, for which a rope or nylon cord and posts are used. At this stage, the location of the wicket and gate should be considered.

When is it designed? brick fence with corrugated sheeting, the depth of digging the trench under the base is also calculated. You need to focus on the level of soil freezing. Therefore, a foundation depth of 1 m is considered sufficient.

By various reasons this is difficult to implement: it is labor-intensive and requires significant financial investments in construction material. There is also a solution in this case, for example, if the base of the fence is scattered, then the deformation of the material due to thermal expansion will not affect the quality and functionality of the fence.

At the design stage of a brick fence with galvanized corrugated sheeting, the width of the span between the posts is determined. For structural strength, they are installed in the center of the pillars. metal pipes.

Foundation arrangement

First of all, the formwork is prepared for pouring the concrete mixture. For this purpose they are used wooden blocks(width 25 mm). The material is laid in such a way that the formwork rises above the trench by about 10 cm. It is necessary to ensure that the top board is parallel to the marking thread.

Corrugated fence with brick pillars will last a long time only if reinforcement is installed, and this must be done correctly: the minimum permissible distance from the rods (diameter 8-12 mm) to the formwork is 30 mm. If this rule is not followed, the risk of corrosion increases.

Strip foundation diagram

Vertical rods are attached at the top and bottom at a distance of 1.5 m. To connect the reinforcement, knitting wire or welding is used. Once the installation of the rods is complete, you can begin installing the pipes in the areas where the pillars will be erected.

To strengthen the fence structure, they need to be secured. metal corners. Concrete mix: sand (3 shares), crushed stone (6 shares), M400 cement (1 share), water (0.75 shares).

In addition, a small amount of plasticizer is added (0.1% total number cement). At home, you can use ordinary liquid soap. Crushed stone and sand are laid at the base of the trench before pouring. Both layers are 10 cm thick.

Installation of a frame made of profiled pipes

The pillars at the base of the brick racks also perform another function - logs are welded to them, onto which a corrugated sheet is already attached. Pipe sizes rectangular section: 40x40x2 mm. A budget option– 40x25x2. The logs are cut to the required length, which is determined by the distance between the posts. First, you need to slightly grab the pipes to determine whether they are installed correctly by building level. Then strong welding is performed.

The recommended number of logs for one profiled sheet with a height of up to 1,800 mm is 2 pcs. If the fence is planned to be larger, use 3 pieces. The outermost pipes should be located at a distance of 20-25 cm from the edges of the corrugated board. To prevent the structure from corroding, it must be primed and then covered with paint and varnish.

Brickwork

It is difficult to guarantee the accuracy of this work without experience. However, it is quite possible to erect brick pillars on our own. First of all, waterproofing of the foundation is ensured in the areas where the first row of bricks is installed.

For this you can use ordinary roofing felt. Each subsequent row is tied metal mesh, which will strengthen the structure. You need to work with a solution: 1 share of cement, 3 shares of sand.

The voids inside the brick pillar are filled with the same mortar as it is erected. Thanks to these actions, fences built from brick and corrugated board become stronger, which means their durability is ensured. At the end of the work, you need to cover the pole with a decorative cap: made of concrete or metal.

Installation of profiled material

For the construction of the fence, wall or universal profiled sheet of grade C or NS is used. Fastening to the joists is carried out using galvanized roofing screws with a rubber gasket.

If a material with a different coating is used, the fasteners must match it in color. First you need to make markings on a profiled sheet. To avoid damaging the foundation, it is covered with woven material or cardboard.

The fastener is installed in the cavity of the profiled material. These actions are performed using a screwdriver/drill. The joining of two sheets is done with an overlap. To determine the amount of fasteners, you should know that per 1 m metal sheet It takes 6 screws.

Fences made of corrugated board and brick have a long service life. But there is a high risk of damage during installation. anti-corrosion coating profiled sheet. If there is a scratch, it can be covered alkyd paint. This will avoid changes in the properties of the material on this area under the influence of corrosion processes.

We must not forget about the need to install gates and wickets. To do this, it must be possible to install embedded fastening elements in the brick pillar. An important nuance is to ensure protection of the edge of the corrugated sheet, for which a decorative strip is used. Should be organized safe conditions work: when welding, as well as cutting metal structural elements and bricks, you must wear protective glasses/gloves.

If you use a drill to attach corrugated sheets, you need to use it at low speeds. Otherwise, there is a high risk of grinding off the cutting edge of the fasteners, and the tool will also overheat.

Thus, fences made of brick and corrugated board look solid, last a long time, and, most importantly, their installation is relatively inexpensive. All installation work can be done on your own. The most difficult stages: correct laying of the foundation; welding work of profile pipes, which are fastened by direct use of the building level; erection of brick pillars. But you can fasten the corrugated sheets without unnecessary difficulties.

In time immemorial, fencing a home was carried out exclusively protective function, protecting a person from uninvited guests and ferocious animals. Today, this building element has more extensive functions, and in addition to the main task, fences are able to solve aesthetic issues, being a real design addition to any structure.

That is why today the construction services market is literally teeming with proposals for the installation of enclosing structures made from concrete, metal, wood, and other building materials. But, perhaps, the most durable and high-quality fence is considered to be a brick fence. And since its only drawback is its high cost, it is advisable to combine bricks with less expensive products. Therefore, taking into account the above, it is advisable to consider in detail the methodology of how to make a fence from brick and corrugated board with your own hands.

Choosing a composite fence design

First of all, when building a fence from brick and corrugated sheets, you should decide design features element and find out exactly where it is located. For this purpose, the most justified action would be to draw up a preliminary design, with a detailed description of the specified parameters.

Moreover, when drawing up this plan, it is advisable to adhere to the basic recommendations:

The width of one span (the distance between adjacent elements) should be taken to be at least three meters;
Select the location of the fence based on the plan of the land plot;
When building a fence on sloping soils, divide individual sections of the fence into sections with differences in height.

In addition, when drawing up a detailed sketch, you should take into account the installation location and design of the entrance gates and gates.

Carrying out marking operations during the manufacture of a fence

Due to the fact that a fence with brick pillars has an impressive mass, it is very important to timely and correctly mark the future structure. For these purposes, the installation locations of the outer supports are first determined, and then a tapping cord is stretched between these points, which indicates the installation line of the future fence.

Concreting the foundation for self-production of a fence from bricks and corrugated sheets

And although this may seem strange to many people, making a foundation for a fence with brick columns is one of the most important procedures. This circumstance is due to the fact that structures of this type have a significant impact on the soil cavity and long-term and high-quality operation of such a fence can only be guaranteed if there is a solid foundation.

Before concreting the foundation for the fence, it is necessary to plan (level) the area. Then, in the marking areas, recesses should be prepared that correspond to the dimensions of future structures. Moreover, the depth of the pits in the places where brick columns are installed should reach 1 meter, and at the points where intermediate metal supports are installed, it should be 60 cm. This will prevent deformation of the foundation during periods of temperature fluctuations.

Additional reliability of a brick fence can be achieved through the use of a foundation belt type, which is installed between the support pillars of each span. Therefore, in addition to the recesses for installing supports, it is immediately advisable to dig a trench to fill the intermediate horizontal base. The depth of this trench is usually dug to 30 - 40 cm, and its width is selected depending on the personal preferences of the performer, and varies in the range of 100 - 250 mm.

At the next stage, you should prepare formwork - a wooden fence, into the cavity of which you will subsequently pour concrete composition. In principle, it is advisable to construct formwork only for a strip foundation, and in areas where it is planned to install support pillars, concrete can be poured directly into the existing recess in the ground.

In order to make formwork with your own hands, you should use wooden boards, which are installed above the ground level by at least 100 mm and with the same size are immersed in the trench cavity.

The fastening of the formwork panels is best achieved using perpendicular wooden jumpers, which are first driven into the ground and to which the wooden panels are subsequently fixed using self-tapping screws (a screwdriver is used).

When constructing formwork for a fence with brick columns, it is necessary to ensure that the upper edges of the boards are horizontal, which can be checked using a building level.

At the next stage, a reinforcing frame should be made to give the foundation strength and performance characteristics. For these purposes, a prefabricated structure is made from metal rods with a diameter of 8-12 mm in the following sequence:

With a step of 0.5 - 0.8 meters, scraps of reinforcement are driven into the recess of the trench in two rows, and this is done in such a way that from the extreme planes of the future foundation metal elements were removed by at least 30mm;
To received vertical supports horizontal rods are fixed at the top and bottom points (by welding or tightening with annealed wire);
Using shorts, cross-links are made in the same way, forming a rigid frame.

In the future, before concreting the foundation with your own hands, the bottom of the recesses should be covered with a layer of crushed stone and sand (each 10 cm), which are moistened and compacted well.

The technology of concreting the base itself boils down to the fact that building mixture poured into the cavity of the formwork, into which they are pre-installed, leveled and fixed support pillars:

Pipe 40x20x2mm - for intermediate support posts;
Pipe 40x40x2mm - for brick columns;
Channel 100x50mm (2 pieces welded into a square) - for load-bearing posts for fastening gates and gates.

Water (0.75 parts);
Cement grade M400 or M500 (1 part);
Sand (3 parts);
Crushed stone of medium fraction (6 – 7 parts);
Plasticizer (liquid soap) 0.1% by weight of cement.

When the composition acquires a homogeneous structure, the concrete mixer is turned off and concrete is poured. If required, you can make a concrete mixer yourself (you can get acquainted with the technology at the address).

When performing this process, you should ensure that the material fits into the formwork cavity as tightly as possible (for which they use the bayonet method), and when the entire free cavity is filled, level the concrete and cover the structure plastic film for quality ripening.

Subsequent work should begin no earlier than 20 days later, and the best option To strengthen the foundation, the concrete will be wetted daily with water.

Construction of a frame for a fence with brick posts

To make it possible to fix the corrugated sheets, jumpers are mounted between the support posts. For these purposes, a square pipe 40x20x2mm is used, which is cut to a given size, and the resulting elements are welded to vertical posts (an inverter can be used welding machine). Moreover, at least two jumpers must be installed between adjacent columns, which are located at a distance of 20 - 25 cm from the upper and lower support points. After finishing welding work It is recommended to cover the entire frame with paint and varnish.

Laying fence posts

At this stage, it is better to trust a professional, since without experience stone works, making a fence post will be very problematic. The best materials to use for the manufacture of such supports are: decorative brick Bassoon, with straight or beveled corners. Moreover, during the manufacture of columns, a cement-sand mortar should be used (in a ratio of 1 to 3), and each new row should be tied with a metal mesh. In addition, the free cavities of the brick column should be filled with mortar, and the top of the element should be provided with a concrete or metal covering (cap).

Installation of corrugated sheets to the frame of a fence made of bricks and panels

The final stage of fencing manufacturing is the fastening of the corrugated sheet. However, before installing the corrugated sheeting, marks are made on the material indicating the locations of the screws, and the surface of the strip foundation is covered with cardboard or rags, which prevent damage to the material during installation.

Next, the sheets are set in a given position, and they are fastened to the frame elements, for which galvanized self-tapping screws with a 4.8x30mm rubberized head are used. To screw in the fasteners, you should use a drill or screwdriver, and fasteners should only be made to the lower corrugation of the corrugated sheet through the wave. All remaining materials are fixed in a similar way, with the sheets overlapped.

Construction of a fence made of brick and corrugated board: basic recommendations

In order for a self-made fence with brick posts to have higher performance characteristics, during its manufacture you should adhere to certain recommendations:

In the places where gates and gates are fastened, provide for the installation of embedded elements in the post structure;
Traumatic operations (cutting corrugated sheets, bricks) should be performed only with the use of protective equipment (glasses, gloves);
It is advisable to equip the end faces of the sheets with a decorative profile for mechanical protection of the flooring.

Video instructions about self-production brick fence posts:

If you liked the material, I will be grateful if you recommend it to friends or leave a useful comment.

Every owner own home wants to fence off its territory from curious neighbors and animals from entering the area. To do this, a reliable fence is installed around the perimeter of the site.

Today there are many options for site fencing, but in Lately A fence made of corrugated sheets with brick posts is becoming increasingly common. This fence looks solid and very attractive, unlike other types of fencing. Building such a fence is not particularly difficult, and the financial costs for its installation are low.

The construction of a fence made of profiled sheets with brick posts is practically no different from the construction of a fence made of corrugated sheets with posts made of a metal pipe, but there are still some nuances. First of all, the owner must clearly understand the final version of the fence and calculate its dimensions.

You will also need to prepare necessary tool for work and purchase building materials.

The construction of such a fence includes the following stages:

preparatory work;
determining the size of the fence;
construction of the foundation;
frame installation;
laying brick pillars;
fastening the corrugated sheet to the frame.

Determining the size of the future fence

First of all, it is necessary to determine the size and location of the fence made of corrugated sheets with brick columns. First, the corners of the future fence are marked with pegs and a nylon thread is stretched between them. The length of the perimeter of one side of the site is divided into equal segments. Each marked place is indicated by a peg. In the future, support posts will be installed in the marked places.

Important! Brick columns should not be too wide, so their width on the side and front sides is only 1.5 bricks. If there is a sufficient amount of material, the masonry can be made in two bricks.

The width of the strip foundation should be 20-25 cm. The foundation will protect the territory from penetration by digging under the fence of animals. Typically, the height of the base is 10-25 cm. In some cases, sidewalk curbs are used instead of building a foundation. But it all depends on the preferences of the owner.

Construction of the foundation

To build a fence made of corrugated sheets with brick pillars, a strip foundation is used, the manufacture of which consists of the following steps:

trench preparation;
installation of formwork;
pouring the foundation.

Preparing the trench

By general rule The depth of the trench must be greater than the freezing depth of the soil. As a rule, a trench is dug 40-80 cm deep, depending on the climatic conditions of the area. In the places marked with pegs under the posts, holes are dug or drilled for installing the pipe. The bottom of the wells is compacted with sand and the base of the column is inserted - a round or square pipe. Depending on the height of the fence, a pipe of appropriate length is selected.

In progress earthworks is formed sufficient quantity soil. The top fertile layer can be left on the site, and the rest of the sand is leveled along the fence or transported outside the site.

Important! When installing support posts, you must ensure that they are installed strictly vertically. You can check this with a building level.

Installation of formwork

The height of the formwork is chosen at the discretion of the owner, however, making it more than 25 cm above ground level is impractical. The formwork is erected from semi-edged construction boards. If there is ready-made formwork, install it. To prevent the boards from bending under the weight of concrete, they are additionally fastened with wooden jumpers or pegs driven into the ground.

After installing the formwork, it is reinforced. For this, reinforcement rods are used, the diameter of which is 1 cm. The reinforcing rods are connected to each other with knitting wire, which will increase the strength of the foundation being built. Sometimes reinforcement cage collected from the outside and then lowered into the formwork.

Metal support posts are needed to strengthen brick pillars. Optimal distance between pillars - 2 meters. To ensure that the pipes do not become askew during the process of pouring the foundation, they must be carefully secured in the well. To check the installation level of the pillars, a nylon thread is also pulled in the middle and on top, similar to the bottom one (which determines the height of the foundation). While pouring concrete, the verticality of the pillars is constantly monitored.

As a rule, the height of the fence is 1.5 meters. Consequently, metal pipes for pillars, taking into account their deepening, should have a length of 1.9 meters.

Pouring formwork

To prepare cement mortar, crushed stone, sand, water and cement, preferably grade M 400, are used. In some cases, a plasticizing additive is added to the mortar to increase frost resistance. The ratio of sand and cement in the solution can be 1 to 3 or 1 to 4. It all depends on the brand of cement. The solution is mixed in a concrete mixer or manually until a homogeneous mass is obtained. Household liquid soap (plasticizing additive) is mixed with water. Only after the foam has settled can it be added to the solution.

The prepared solution is poured into the formwork, carefully leveled with a trowel and leveled to the level of the stretched nylon thread. The drying time of the foundation depends on weather conditions and is at least 3 days. Complete hardening of concrete occurs a week after pouring.

Frame construction

The stability of the future fence determines the quality of the frame. Its construction begins no earlier than 3 days after the foundation is poured. The construction of the frame can be done both before laying out the brick columns and after the construction.

The construction of the frame before the erection of brick pillars is carried out using a 20x40 profile pipe. The pipes are welded to the installed metal posts using welding. Horizontal pipes welded at a distance of 30 cm from the top of the column and at a distance of 15 cm from the surface of the foundation. It is recommended to coat the manufactured frame with alkyd paint, which will prevent metal corrosion.

In the second case it is necessary to installed pipes At a distance of 30 cm from the surface of the formwork and the top of the pipe, weld embedded metal plates that are brought out to the outside of the brickwork. In other words, the mortgages must protrude from the brickwork. After laying the pillars, cross members from a profile pipe are welded to the protruding mortgages.

Laying brick pillars

For lining installed metal supports it is used facing brick. Brick laying is done using cement mortar with a cement to sand ratio of 1 to 3. You can also add liquid soap to the mortar, which will improve its ductility.

Bricks are laid around the installed metal pole. The gap formed between the pillar and the brickwork is filled with mortar. To strengthen the masonry, it is allowed to reinforce each two rows with a 50x50x4 mm mesh.

Advice! It is advisable to lay the pillars one by one: first lay the first pillar to a height of 50-60 cm, then the next one. This will allow time for the brickwork to shrink.

In places where profile pipes interfere with the masonry, the brick should be carefully cut with a grinder, then fit it under the pipe, carefully sealing all the cracks cement mortar. To give brick pillars a finished look, special ready-made caps are installed on top or I make them myself from galvanized steel.

Caps purchased at a hardware store are installed on the mortar, and those made of galvanized steel are attached with dowels to the last brick row. Such caps can be painted to match the corrugated sheeting to give them beauty.

Fastening corrugated sheets

The final stage of building a fence with brick posts is attaching corrugated sheets to the frame. For this, galvanized roofing screws or special rivet nails are used.

Fastening, as a rule, is made in each wave adjacent to the crossbar. To do this, use a drill to drill a hole in the corrugated sheet and the cross member, after which a self-tapping screw is screwed in or a nail is pressed with a rivet gun.

The sheets are laid one on one with a slight overlap.

When the last sheet of corrugated sheeting is attached to the frame, the work is completed. Thus, installing a fence made of corrugated sheets with brick posts is not so difficult if you follow the stages of its construction.

A fence made of corrugated board with brick pillars is different high strength and reliably protect the area from the penetration of uninvited guests and animals, and brick pillars give such a fence a very rich and aesthetic appearance. When building fences for a summer residence, corrugated sheeting with a colored polymer coating (polyester) is usually used. It provides excellent corrosion resistance to the installed fence, attractive appearance And color solutions according to the general design concept of the house and site. The primer and polymer coating are applied to the corrugated fence by the manufacturer. The brick pillars themselves can be laid out of facing bricks different colors and texture, clinker and ordinary building bricks. Next, such a pillar can be covered decorative plaster or cover it with decorative stone.

Advantages of a fence made of corrugated sheets
with brick pillars

Reliability A fence made of corrugated sheets with brick pillars is a reliable barrier from thieves, unnecessary noise and prying eyes, as well as negative impact external environment.
Practicality Profile sheets have a polymer coating that protects the sheet from corrosion, is easy to clean from dust and dirt, and can be easily replaced if damaged.
Durability Fences made of corrugated sheets with brick pillars have excellent resistance to corrosion and other external influences.
Aesthetics Combination of profile sheets with pillars made of natural brick or stone, gives the fence a very rich and aesthetic appearance, visually ennobling the area.

Materials and components for the construction of corrugated fences with brick pillars

Types of bricks
Profile types
Color palette
Pillar decor
Caps

The most common type of corrugated fence. Possesses optimal combination price quality. Due to the symmetry of the waves, an imitation of a picket fence is created. To ensure normal fence rigidity, it is recommended to use a thickness of 0.4-0.5 mm.

Profiled sheet S-20

A beautiful type of corrugated board for a fence. Has significantly greater section rigidity. It can be used in a thickness of 0.35-0.5 mm, especially when adding additional logs.

Profiled sheet HC-8

The most rigid corrugated sheeting for a fence. When using such a profile, you can increase the spans between pillars and reduce the number of logs. Such a profiled sheet can be installed horizontally without crossbars at all. Such corrugated sheeting can be used in a thickness of 0.32-0.35 mm, especially when using additional logs.

Facing brick

Clinker brick

Cost of a corrugated fence with brick pillars

The procedure for installing a fence made of corrugated board on brick pillars

01 Marking
plot
When marking the site, we use a level, tape measure, pegs and string. At this stage of fence construction, pegs are placed at the border of the site, under the entrance group, as well as marking the levels of the foundation and brick pillars when there is a difference in the relief of the site.
02 Arrangement
foundation
At this stage, we dig a trench for the future strip foundation and separately make a foundation for each brick pillar. Then we install formwork made of laminated plywood, add a sand cushion, lay a frame of reinforcement and fill everything with concrete grade M200-M300, followed by vibratory compaction.
03 Brickwork
pillars
At this stage, the brick pillars are laid. The brick is laid around a metal pillar 1.5 bricks wide. Thus, the column turns out to be 380x380 mm in size. When laying into a pillar, metal embedded elements from the corner are laid in advance. The internal cavity is filled with cement mortar. After laying, jointing is carried out masonry joints to seal and give seams a beautiful appearance.
04 Installation decorative elements
The tops of the brick pillars are crowned with decorative caps made of sheet metal in the same color as the corrugated sheet, or cast from concrete or alabaster. A metal casting of the same color as the corrugated sheeting is installed on the surface of the foundation.
05 Installation of metal frame and corrugated sheets
At this stage, horizontal crossbars are welded to the brick pillars, to the pre-exposed mortgages. The welds are cleaned and treated with a primer or paint, which provides anti-corrosion protection for the fence. Sheets of corrugated sheets are attached to the logs, overlapping one wave, using metal screws in every second wave.
06 Gate installation
and wickets
After installing the corrugated sheeting, we proceed to installing gates and gates. To do this, racks with hinges and also wicket recesses are welded to the protruding embedded elements of the brick pillars. The frames of gates and gates must fit into the opening very accurately, with a gap of no more than 10 mm. Gates and wickets are equipped with all necessary locking hardware.

Why our company

High quality Thanks to the availability own production, the use of high-quality materials and professional equipment We always strive for high quality.
2-year warranty Thanks to our own production, the use of high-quality materials and professional equipment, we always achieve high quality.
Competitive prices Since we work closely with domestic suppliers who provide us with discounts, we are able to support affordable prices on fences made of corrugated board under a tree.
Stable budget After we draw up a budget plan and agree on it with you, the final amount will be approved. This means that there will no longer be any additional costs included in the estimate.
Delivery of materials Our teams are fully staffed. We cover all costs for delivery of materials to your site. All you have to do is call and order fence installation.
Convenient options payment Our company provides various options payment. You can pay us directly at the site or through any Bank of Moscow office using a bank card.
Manager's visit We can organize a team visit to your site at a time convenient for you. At the site you will be able to sign an agreement, after which our specialists will begin fulfilling the order.
We do it thoughtfully and responsibly.
Quickly, but carefully,
smooth, beautiful.

By ordering a fence made of corrugated board with brick pillars you will receive