How to weave a fence if the branches are short. How to make a willow fence with your own hands? Preparation of material and marking of the territory

A wicker fence is more of a beautiful designation of the boundaries of a site and an element of landscape design than a reliable fence to protect the territory. Wattle attracts with its rustic charm and feeling of coziness, so quite often this type of fence is used in the country as a fence inside a plot or as a border for a flower bed.

Several options for installing wicker fences and fences in the country

You can make it yourself from almost any flexible materials:

Advantages and disadvantages of a wicker fence

Having decided to install a fence on your site, you need to evaluate all the pros and cons of such a fence. has the following advantages:

Wicker fence also has disadvantages:

• Short service life and instability to natural factors. Wattle made from vine, hazel or willow will last no more than 10 years;
• The fence is considered an insufficiently strong building, unable to protect the area from uninvited guests. Although a two-meter fence made of tightly woven branches with a diameter of more than 2 cm is quite difficult to overcome;
• Complex restoration work. If one fragment of the fence is damaged, it can only be removed and replaced with full analysis sections;
• Fire hazard. A wattle fence is flammable;
• Such a fence looks organic only in the country house and near cottages in a rustic style.

Types of wicker fencing

Types of fence depending on height

Wicker fences according to weaving method

By installation method

• Mounting on . When the rod runs out, a new one is taken and weaving continues; the ends of the branches are secured with wire. If used, the strength and durability of a wicker fence increases significantly;
• Installation of fence in sections. Pre-woven fabrics are located between the support pillars. Such sections are easier to restore or completely replace if damaged.

Preparation and processing of material for a wicker fence

You can make a wicker fence from any pliable rods. Traditional material for weaving is willow. This is the strongest material with excellent flexibility, which is also quite common. For weaving you need rods at least one and a half meters long.

It is best to harvest willow branches in the spring before the sap begins to flow, in late summer or autumn. The rods are selected as even as possible and of the same thickness.

These can be young one-year-old shoots, which are used for weaving in bunches, or branches 2-3 cm thick for a high fence. For medium and small hedges, shoots with a diameter of 1-2 cm are cut. The branches for the fence are cut with an oblique cut; they can be used freshly cut or prepared for future use and dried. Dry branches are steamed before installation.

Preparation of material

Living and non-living method of weaving a willow fence

There are a lot of weaving methods, and the first thing you need to decide is which type of fence is preferable for a particular area: its height and weaving technology. There are two types of willow wattle: living and non-living.

Living wattle fence

The peculiarity of a living wicker fence is that the hedge gradually begins to grow and forms a fairly strong fabric. Caring for the fence is simple: growing branches are trimmed or given a new direction. Although such a fence will protect the territory no more than a picket fence, over the years the living fence does not deteriorate and only becomes stronger.

An example of constructing and growing a living wicker fence

Making such a fence is not difficult. Let's consider a master class on how to create a vertical wicker fence with your own hands:

The resulting net of twigs will soon turn into an unusual hedge. Such a fence does not require protective painting or impregnation, unlike non-living fence.

How to make a wicker fence at your dacha with your own hands

A wicker fence is a very interesting fence for a site or a decorative backdrop for a front garden inside a garden or country house. The technology for making wicker fences has been preserved since ancient times, when wattle fence was the most common type of household fence.

A traditional wicker fence is made from improvised means - available branches, vines, sticks. In modern landscape design wicker fencing is regarded as environmentally friendly and natural, meeting the requirements of aesthetics and satisfying the artistic taste of the gardener. This is an item of national Slavic flavor, a fashionable element of the garden, and an affordable fence.

How to make a wattle fence at your dacha with your own hands? Which technological features do you need to know and take into account for quality work? Let us dwell in more detail on the traditional technology of weaving from branches and vines cut from trees and shrubs.

Weaving material: selection and preparation of rods

To make wattle fence, it is necessary to prepare two groups of raw materials: supports and rods. Can be used as supports wooden poles, thick branches (diameter 6-8 cm), metal pipes. Twigs require long flexible branches diameter from 1 to 3 cm(the higher the fence, the larger diameter intertwined vines).

Species of fast-growing flexible branches of willow or willow are traditionally used as raw materials for weaving; poplar, maple, and birch are also suitable.

In the garden or country house you can use cut branches of flexible fruit trees: mulberries, cherries, cherries, walnuts, apple trees (if they are of sufficient length), such raw materials are growth-bearing branches of one to two years of age. The time for harvesting branches for twigs is spring, before the sap begins to flow. You can cut branches in summer, in dry, hot weather, when the movement of sap slows down due to lack of moisture. Cutting direction – oblique, at 40-60º.

In the photo - a wicker fence made of vines

It is best to weave tyn from freshly cut vines; they remain flexible for a week after cutting. You can try soaking old, long-cut branches in a container with hot water(for example, heat water in an outdoor pool in the sun) or steam it in a bathhouse. You can prepare the vine for future use for future weaving; for this, it is kept in thick sections in water for 1 week, after which special tool(with a pincer) remove the bark and dry the branches. After drying the raw material treated with stain and varnish.

If you are planning a wattle fence made from reeds or cattails, its color can be shaped by pre-drying conditions: when reed raw materials are dried in the sun, the stems acquire a golden hue, and when kept in the shade they retain a light green color.

Installing the base for wicker fencing

Wooden supports are required treat with impregnation, burn, tar, especially those ends that will be dug into the ground. Ideal wooden supports would be larch pillars, which do not rot even in water. It is a well-known fact: medieval Venice was built on larch.

The depth of the supports depends on the planned height of the fence and is 50 cm for a 1.5 m fence or 30 cm for a meter fence. Low decorative fences can be driven into the ground 15-20 cm.

The distance between supports in a fence usually corresponds to 40-50 cm (depending on the thickness of the rods); the thicker the rod, the greater the distance between supports can be left. It is advisable to place the supports at the same distance, either all 40 cm, or all 50 cm. Along the edges of the planned fence, the last three supports are located at a short distance: 20-25 cm. This compaction will help secure the vines during further weaving.

Weaving of twigs

The prepared rods are woven one by one into the fence between the supports. The lower vine is secured at the beginning of the weaving in one of two ways: either with wire around the frame, or by burying it 10-15 cm into the ground (for this, the edge of the branch is stuck vertically into the ground). Subsequent vines, especially the top ones, are secured only with wire around the frame.

As a rule, each vine has a thicker edge (the one that was closer to the trunk) and a thinner end. Laying the branches must begin from the thick end, then the thin branch remaining at the end is imperceptibly tucked along the support between the already laid vines.

When weaving vines, every 3-4 rows they are compacted by tapping with a hammer.

If the weaving is made from cattail (reed), you can lay not just one stem at once, but an armful of 5-6 stems. In this case, the panicles are pre-cut.


All edges and cuts are left with inside fence To increase durability, the finished wicker can be varnished.

Wicker fence decoration

The wattle fence itself is a good decoration for the area, but if desired, you can further decorate it.

• You can enhance the country style by hanging clay pots and dried peppers, ripe ears of corn, a beautiful orange pumpkin, and also by sowing sunflowers (sparsely, scattered).
  You can attach a wooden wheel near the tine from old cart or put up a house made of dried pumpkin with windows and doors.
• You can enhance the romance by hanging baskets with fresh flowers (petunias, violets, marigolds, border chrysanthemums). Available plastic pot placed inside a wicker basket and suspended from the fence support from the outside or inside.
  Another option for decorating with flowers would be to plant climbing small flowers along the fence: bells, large clematis or climbing roses.
• You can expand the rockery by figuratively laying stones along the tine.

Types of wicker structures for fencing areas

The traditional wattle structure of supports and intertwined branches can be varied by the shape of the weaving and the material of the vines.

• Chess. Horizontal rods are laid not one at a time, but in groups. With this weaving, a “checkerboard” pattern is formed.
  

  

• Vertical weaving. For such a fence, three or four horizontal strips of wood are rigidly attached to the installed supports. wooden beam or tree branches with a diameter of 5-6 cm. The rods are laid in a vertical direction, intertwining between horizontal planks.
  

  

• Diagonal chess. This type of fence is more difficult to manufacture; you will need skills in weaving and screwing self-tapping screws into the wood material. To the top wooden frames, fixed between the supports, rods with a diameter of 4-5 cm are attached to self-tapping screws, with a distance of 10-15 cm. The fixed rods are turned diagonally. Other rods are intertwined between them in the direction of the opposite diagonal.
  

  

• Veneer weaving. Most often it is performed as a prefabricated panel structure. In each block (shield) four frames are twisted onto which supports are attached. The veneer trims bend around the installed supports, forming a wattle fence. The veneer is secured with metal clips or short nails.
  

  

• Reed wattle. It is a vertical picket fence made from bunches of reeds or cattails. There is no weaving in it, there is vertical supports, horizontal crossbars and bundles of reeds, tightly reinforced with wire to the horizontal crossbars. Before fastening, the reeds or cattails are cut and tied into sheaves with a diameter of 4-5 cm.
  

  

• Wattle from boards. For such a fence, long boards with the minimum possible thickness are used, unedged ones are possible. The supports are installed at a large distance: if in a regular wattle fence there is half a meter between the supports, then for a wattle fence made of boards the supports are spaced 1-1.5 m apart. The existing boards are laid end down between the vertical supports.
  

  

A wicker fence will become the most original business card summer cottage. If necessary, it can be decorative decoration concrete slab or old brickwork.

The speed at which a fence is built can affect its durability. Rough tyn made on a quick fix, will require repairs in 1.5-2 years. Correctly made wattle fence from tree branches, coated with varnish or other protective coating, can last up to 10 years.

The strength of wicker fences is inferior to stone fences, but it gives extraordinary beauty and a feeling of something unusual, ancient, and kind.

Video about the construction of wicker fences

The video shows how to quickly and correctly make a wicker fence yourself:

In order to decorate the territory in a stylish and unusual way personal plot, it is not at all necessary to seek professional help from landscape designer. There is nothing easier than defining the boundaries of your own plot yourself. And this can be done by erecting a decorative fence, which is commonly called a wattle fence.

Materials for wicker fences

IN Lately became especially popular wicker fences V ethnic style . Wattle, or as it is commonly called, tyn, is a universal and at the same time original decoration for any area. It is very easy to make with your own hands, since manufacturing requires a minimum of materials and skills.

Wattle fence is a universal fence, which is very often used in country houses and garden plots. Moreover, it is used not only as a perimeter fence, but also as a miniature fence inside the site itself for or flower beds.

Any novice master can make it with his own hands decorative fence chick. main feature Such fencing is that it can be made from almost any material, namely: from flexible branches of trees or plants. It is best to weave from twigs using the following types materials:

Types of fence weaving

Having decided on the choice of material, you have to think about what type of weaving will be used in the process of constructing the fence. There are several options for weaving fences from branches. Each of them can be easily implemented with my own hands. The speed of weaving will directly depend on the amount of work:

You can also make a round fence that will look gorgeous around front gardens or flower beds. Such fences perform a decorative function and simply help decorate the area.

Advantages of wicker fences

Wicker fences have several main advantages, which distinguish them favorably from fences made from artificial materials. They are as follows:

Regarding the disadvantages, they are only that such fences, if installed incorrectly, quickly become deformed, they do not have a security function and they are short-lived. Otherwise, wicker is an excellent analogue to expensive fences.

Preparation of material

Before you do it yourself, you should first start preparing the material from which it will be created. If this is not done, then the fence made of twigs will be short-lived and fragile, and the branches will bend poorly and be difficult to process.

It should be remembered that blanks for fences should be made either in early spring, or in the fall. This is due to the fact that during this period the trees secrete the least amount of sap and they have practically no abundant foliage. You should try to select straight and long shoots without knots. The preparation of the material must be completed next steps:

After preparatory work, you can begin installing a decorative fence. To do this you will need to stock up on tools:

Instructions for creating a vertical tine

To make a vertical fence with your own hands, just follow simple instructions and follow the sequence of actions:

That's all, the vertical fence fabric is ready. If desired, you can decorate it with some decorative elements or just paint it any color you like.

Horizontal tyn

Having prepared all the tools and materials, you can begin building a horizontal fence. The process includes several stages:

To prevent the parts of the fence that will be in the ground from rotting over time, they should be pre-char or lubricate with bitumen. You should always use only wet twigs, since dry branches bend poorly and break quickly. And in order to somehow unusually decorate the finished fence, it is enough to use a variety of elements of traditional decor - here you can use everything that your imagination suggests.

The technology of weaving a vine fence has remained unchanged since ancient times, when this type of fence was the most common type of fencing. Today, the wattle fence is used more as an element of landscape design, characterizing the national Slavic flavor.

How to choose and prepare material for weaving? What technology should you follow when creating a fence? Let us dwell on these and other aspects of fence manufacturing in more detail.

Features of wicker homemade fences

Wicker fence - interesting option fencing the front garden or zoning the area inside the personal space. The fence fabric is made from various available materials. It could be hazel, willow branches, willow or vine. A decorative hedge is a component of landscape design and gives the garden a special flavor.

1. The main advantages of a fence made of vines or other “wicker” models include:
2. High decorative and aesthetic qualities. Combining fences from different materials or different methods weaving, you will be able to create an original design.
3. Ease of manufacture. Weaving technology does not cause any difficulties. The main thing is to prepare the rods correctly and adhere to the chosen pattern.
4. Environmental friendliness of the mini-building. Thanks to natural components, the fence looks organic in the garden, near the gazebo, in the flowerbed, etc.
5. Affordable price. If you stock up the rods yourself and do all the work, the fence will turn out to be very cheap. Possible costs: consumables and purchasing missing tools.

Despite the strong arguments in favor of a wicker fence, skeptics also note some disadvantages of such a fence:

1. Wicker, even made from durable materials, is not a complete protection of the site from intruders. Therefore, a fence made of twigs is installed primarily for the purpose of zoning a personal plot from the inside.
2. Limited service life and susceptibility to adverse weather conditions. With strong weaving, the service life of the fence will be no more than 7 years.
3. Fire hazard of the fence.
4. Difficulty in restoring the damaged area. If one or two rods break, the fence will have to be partially unraveled and re-woven.

Types of wicker fencing

All wicker fence options are classified according to the main parameters:

• material of manufacture;
• size of the finished product;
• weaving method.

Material of manufacture.“Braids” are made from reeds, cattails, hazel and willow. Fences made of wicker are especially popular. More durable models are made of veneer and boards - such a panel forms a dense panel with minimum quantity gaps.

In cottage and holiday villages, PVC fences are becoming more and more common. Plastic fences are less demanding in terms of weather conditions, but they are inferior in attractiveness to their counterparts from natural materials.

Dimensions of wicker fence. All fences are divided into three types according to height:

1. Low products up to 1 m are suitable for fencing flower beds, garden paths and children's playgrounds.
2. Medium fences 1-1.5 m high visually divide the space into different functional areas. For example, the pool area can be fenced off from the rest of the yard.
3. High fences - more than 1.5 m. Such fences are installed along the perimeter of the site, acting as a full-fledged fence.

Weaving methods. When arranging a site, the following methods are most often used:

1. Vertical weaving - the rods rest on the ground. If you use vine shoots, over time a hedge with green leaves will form.
2. Horizontal weaving is one of the easiest options. Flexible rods are laid along the ground between the installed supports.
3. Inclined method - the branches of the canvas are fixed to each other diagonally. Such a fence looks very interesting and does not overload the space at all. Sloping weaving is recommended for small shaded areas.
4. Chess method - horizontal rods are placed in groups. The product is difficult to manufacture and will require additional fixation with self-tapping screws. It is better to entrust the creation of a checkerboard braid to experienced craftsmen.

When choosing a material to create a fence, you need to evaluate the advantages and disadvantages of each of them.

Willow has good strength and flexibility. Any type of “weeping” tree is suitable for constructing a fence. With the help of willow, you can create a hedge using the young shoots of the tree. The buds on the branches develop quickly, and the fence becomes overgrown with leaves.

Cattails and reeds are available and easy to process. However, the material is short-lived due to low strength. Reed thickets can be used in the construction of low fences intended for zonal delimitation of space. The main disadvantage of reeds is that they are highly flammable. In hot weather, a carelessly thrown cigarette can cause a fire.

Hazel wattle will last up to 10 years. The material is harvested in early spring, when the buds on the branches have not yet ripened.

We weave a fence with our own hands: horizontal design

Selection and preparation of vines for the fence

The following vine varieties are best suited for work:

1. Beloloz - willow grows on moist soil, is distinguished by greenish or yellow shoots. When heat treated, the vine twigs become bronze in color.
2. Hemp willow - greenish-brown branches are very flexible. To build a fence, three-year-old shoots must be used.
3. Goat willow - best option for weaving fences. The main advantage of the material is its smooth bark.

Important! It is not advisable to use a talnik for a “braider”. The shoots of the red-flowered willow have a small core, so the fence will turn out to be shabby.

If the rods are used uncleaned, then harvesting can be done all year round. If you plan to remove the bark, then cut off the shoots in October-November with the onset of the first frost. At this time, the buds hide inside and the rods become smoother. Starting from January, it is not recommended to cut off the rods - they become sticky.

There is a simple way to choose a vine for a fence. Bend the cut branch at its thickest point. If the shoot is not cracked and has withstood a 180° bend, then the vine bush is suitable for work.

Rules for cutting rods:

• Shoots 2-4 cm thick are suitable for weaving.
• The cut must be made with sharp pruning shears at an angle of 60°.

Harvesting the vine:

1. Remove the bark from the shoots.
2. It is advisable to boil twigs cut in autumn or winter for five minutes. There is no need to remove the bark.
3. The temperature regime for storing workpieces is above 0°C, but not more than +35°C. Optimal place- dry insulated attic.

Immediately before weaving, the “spring” vine must be taken out and dried in the sun for three to four days. Shoots that have overwintered in the attic must be soaked to restore flexibility to the material.

Development of a drawing of a wicker fence

Before you start working, you need to decide on the weaving pattern. The drawing must show the length and height of one canvas, the number of racks and the distance between the supports.

Typical drawings of a wicker fence are shown below.

Preparation of materials and marking of the site

To work, in addition to the prepared rods, you will need the following tools and materials:

• support pillars - wooden stakes, metal pipes or rods are suitable;
• hand drill for mounting racks;
• garden pruner;
• wire for forming fence stiffening ribs;
• pliers;
• mallet;
• antiseptic for wood processing.

Clear the area for installation of the fence from excess branches and debris. Level the surface and mark places for installing support pillars.

Installation of support posts

Drive metal stakes at equal distances from each other, depth - about 50 cm. If installed wooden supports, then you need to make drainage under them - fill the holes with sand. The lower ends of wooden posts must be treated with an antiseptic before installation.

The stakes must support the weight of the finished fence panel. The thicker the rods are used and the higher the building is, the wider and stronger the supports should be.

Weaving fabric from twigs

Sequencing:

Advice. If the vines are laid in bunches, rather than one shoot in a row, the hedge will be more fundamental and reliable.

How to weave a fence correctly: video

Instructions for weaving a vertical fence

At vertical weaving Thick twigs and branches are used. The work is performed using the following technology:

1. Install supporting vertical posts.
2. Tie or nail horizontal branches to the stakes. Optimal distance between bars - 25 cm.
3. The vine is successively stuck into the ground, intertwined with horizontal rods and cut at the top.

Willow twigs take root easily and by next spring the fence will be green. After two years, the hedge will grow, become denser and stronger. Hedge requires care. Overgrown branches must be cut off and shaped correct form wattles.

Ways to decorate a hedge: photo ideas

The rustic style will be complemented by the corresponding paraphernalia: clay pots, jugs, figurines of domestic animals.

Wicker baskets that act as flower beds look beautiful next to the hedge.

They are often planted next to vine products. hanging plants. Petunias and other flowers grow and wrap around the fences, forming a picturesque hedge.

Complement landscape composition with a fence wooden barrels, carts and other elements from village life.

From point of view modern man The wattle fence is an archaic attribute. Such simple fencing, strongly associated with rural life, has long been replaced by strong, solid, reliable fences. But the wicker type of fence eventually gained new meaning, having turned from household tools to delimit the territory between neighboring houses into a colorful decorative element, which is actively used by designers to decorate a flower bed or flower garden and visually delimit areas of the territory.

It is quite easy to make such a wicker fence yourself from scrap materials. This activity can also bring a lot of pleasure to a person with creative thinking and skillful hands.

Features of a wicker fence

It cannot be said that there is a place for fences exclusively outside the city, for example, in a country house or in a village. Such a decorative fence with its simple rustic look will look good in the design of a flower garden near a city five-story building, jointly tended by the residents. There will be a place for him in the territory kindergarten or near a summer cafe in the city center.

This fence has a number of advantages:

• As a rule, it is made from natural material, which is important for additional environmental friendliness during contact with the fence.
• The product is very easy to install.
• If necessary, the fence can be assembled and disassembled again.
• This type of fence gives a lot of scope for original design solutions.
• In addition to branches of trees and shrubs, you can use some modern materials, for example, thin PVC pipes.

Among the disadvantages of a wicker fence are the following:

• The design is not durable.
• Such a fence is not a permanent structure that has a protective function.
• Difficulty of repair. In case of damage, you will have to rebind significant part fence

A fence reaching a height of two meters can become a fairly reliable limiter on the path of strangers. If you make stone pillars and install wicker sections of wicker between them, such a fence can be considered impenetrable.

To delimit the territory, you can install a fence about a meter high. Children will find a playground with swings very cozy if it is isolated from the noisy street with the help of such an interesting fence. A half-meter-high wattle fence is well suited for “designating” and emphasizing the beauty of a flower bed.

Flexible branches are suitable for creating a fence. The shortest-lived is reed, which can last a maximum of four years. Then it will dry out, which will lead to rapid destruction of the fence. A fence made of boards or PVC will be a completely reliable structure.

A horizontal wattle fence is more reliable than a vertical one, but you can create complex and intricate patterns by intertwining vertically installed branches.

Preparatory work

The creation of the fence must be taken care of in advance. In order not to harm trees and shrubs, it is recommended to harvest the material in January. Choose flexible branches at least half a meter long. The thickness of the blanks should be one to two centimeters. To have a lot of room for creativity, it’s good to stock up on branches of different colors.

Before starting work, the base of the future fence is soaked. You need to make sure that all the branches are completely in the liquid. Soaking can last at least a week. If they were cut very recently, a couple of days will be enough.

The most common materials for wattle are birch, willow, walnut, and apple tree. But it is not at all necessary to focus only on these species of trees and shrubs. A wicker fence will work well from the branches of the most different trees if they are flexible. As a rule, branches of bushes and trees growing near water bodies have such properties. They usually smooth surface and a large supply of moisture inside.

Reeds, unlike vines, should begin to be harvested in August. This process can be extended until October. To achieve a certain design effect, it makes sense to weave a fence from straw. Rye is best for this. When thoroughly soaked, it remains flexible and elastic. Despite the fact that rye straw already has a beautiful color, it can be repainted to any color. Aniline dyes are suitable for this.

How to make it yourself: master class

To create a fence yourself, you need to decide on the choice of installation location for this fence and the material from which it will be weaved. You can do it simply by preparing a vine from what grows in the area - hazel, willow, acacia, aspen and other trees and shrubs.

At the chosen location, make the base of the future fence. To do this, you will need stakes (poles) that need to be driven into the ground to a depth of at least twenty centimeters, but to ensure that such a fence does not fall down and your work does not become in vain, it is better to “ground” these supports by half a meter. To make the work easier, you can use a crowbar, which is convenient for making holes for stakes.

The pegs themselves must be at least five centimeters in diameter. The preferred option is larch. Although both plastic and metal supports are suitable for the base, rebar or PVC pipes are useful. It is convenient to paint them in the desired color.

If they are empty inside, it is better to make plugs in them, which will serve as a guarantee that the base for the fence will be durable.

It is better to treat wooden pegs with an antiseptic, paint, or varnish so that they do not rot. It is recommended to burn and soak the cut areas antiseptic. You can also drive them into the ground before installing them. plastic pipes the right size, and insert wooden supports there. This will allow the fence to last a long time, as it will prevent the wood from rotting in the ground.

The distance between the base elements should not be more than half a meter. It would be rational to place the supports every thirty to forty centimeters, sparing no material. The rods themselves, like the pegs, can be painted in the desired color. Both regular paints and dyes are suitable for this. plant origin. You can give the fence a yellow tint using onion peels and birch leaves; brown is created using black alder. Stain or potassium permanganate is also suitable for painting.

It must be taken into account that you can only start a repainting operation if you are going to build a small fence, since each branch will have to be processed individually. To paint the rods, you need to remove the bark from them. This will help soap solution, in which you need to lower the branches for several days.

To remove the bark, they use a so-called pinch, which is just a split branch with a limiter. This tool can be quite successfully replaced with wire cutters or pliers. The rod is inserted into the clamp of a wire cutter or pliers and pulled towards you. The bark can be removed very easily from a well-soaked branch. If you are satisfied with the original color of the material, do not clear the branches, but simply start modeling.

For creating horizontal fence, braid vertical pegs with branches. Weaving begins from the thick end of the branch, threading it between the pegs to the end of the entire fence or a separate section. Then this procedure is repeated, only the branches are now directed in the opposite direction. They must braid the stakes one by one. If one branch is located to the right and the other is to the left of the base, the result will be a figure eight pattern.

If you are creating a fairly dense structure, after every fourth row you need to lightly hit the upper woven branches with a hammer to compact the structure of the product. Every six to seven rows the spans are reinforced with wire.

Care must be taken to securely attach the lower rods to the supports, otherwise the entire fence will sooner or later slide down.

The wattle fence must have the same thickness throughout its entire length. To do this, thick and thin branches need to be evenly distributed over its entire surface. When a rod ends on one post, a new one is woven onto the previous one. This allows you to maintain the uniformity of the entire structure. For the same reason, the course of weaving is changed, directing the rods in the opposite direction.

At the end, the fence needs to be trimmed along the top line, cutting the thick branches of the base with pruning shears at a certain height. Although they can be bent figuratively, creating openwork arches. Also with You should cut off the excess on the sides of the fence so that it does not bristle.

To create a vertical fence, several branches are horizontally tied to the base pegs, which will serve as slats for fastening other branches that make up the “body” of the fence. The branches used directly for weaving are placed vertically, with their thick side resting on the ground. They need to braid horizontal strips. They need to be tied at the top using wire or rope.

If natural materials for the fence are not found, use PVC pipes. Make a base, drive stakes into the ground to the length indicated above. You need to start braiding the stakes with tubes from the bottom. To make a wicker fence look really colorful, you can plant sunflowers next to it. This is traditional design technique. In urban conditions, even plastic flowers will not cause confusion, and you will not have to take care of them.

Also, wattle will look good in combination with field and garden flowers. It is no coincidence that it is chosen for the garden as an alternative to the border around the flower bed, creating decorative fences of amazing beauty.

In addition, wattle can be an excellent support for beautiful bindweed. And if next to such a fence you build a roughly put together bench from lumps and boards, such a neighborhood will turn out to be very picturesque. You can hang old cracked bottles, or even old shoes, on fence stakes original look, giving the building a non-standard appearance.

A more substantial wattle fence can be created from a board. Instead of wood, you can also use MDF panels or, for example, plastic siding. But it is much better to use natural material.

You should calculate the number of boards in advance and decide on their quality. For a dacha, where guests are rarely welcomed, you can choose third-rate boards, and for a representative country house would be better suited fence made from the best lumber. These should be well-treated boards, the thickness of which is at least two centimeters.

For supports you can choose not only wood, but also metal, concrete or brick pillars. These supports should not prevent the boards of the future fence from bending.

To prevent the fence from being knocked down by a strong wind, you will have to use screws and nails.

To create such a fence, vertical supports are installed at a distance of two meters from each other, and additional posts are placed between them. For reliability, it is better to concrete the supporting elements.

The most difficult thing is to install the boards horizontally, bending them around the pillars. During the construction of the fence, they need to be screwed to the supports. It is recommended to bend each subsequent board in the opposite direction to the bending direction of the previous one.

After completing the work, such a solid wattle fence is treated with varnish or an antiseptic - this way it will last a long time without losing its respectable appearance.

Care

The disadvantage of wattle fence made from natural materials is that it rots over time. Therefore, even at the stage of creating the fence, you can make a drainage layer along its entire length, which will quickly absorb water after rain. This way the fence branches will not periodically stand in a puddle. To do this, you need to dig a trench half a meter deep and fill it with sand and crushed stone.

From time to time, a wicker fence needs to be treated with antiseptic and insect repellent.

Beautiful examples

There are a lot of ways to weave from branches. They can be used not only to create original baskets, but also to build fences. All these numerous techniques are used in landscape design. A wicker fence can look very textured if you highlight each row with several layers of branches and create checkerboard pattern on the surface of the fence. A tall fence will not only decorate the area, but also hide it from prying eyes.

Wattle can be made an interesting design addition to a solid metal fence. A metal fence decorated with decorative elements carries protective function, and the wattle fence creates a feeling of comfort and rustic simplicity.