How to choose a good electric jigsaw, so as not to regret it later? Choosing a jigsaw How to choose a jigsaw for the home.

An electric jigsaw will show itself perfectly during repairs. It becomes useful surprisingly often. Using different types of saw blades, you can cut metal, wood, plywood, chipboard, materials made of plastic or epoxy resin. According to statistics, this is the second most commonly used tool after a screwdriver.

How to choose a jigsaw for the home, which company, what to look for, what additional equipment may be required? Do I need to purchase high-end equipment for home use or is a simple model enough?

The principle of operation of the jigsaw

A jigsaw is necessary in every workshop, useful for some household work, repairs.

The tool can cut:

• wood,
• soft metal,
• plastic.

It can perform different cutting lines:

• straight line,
• curves,
• zigzags,
• holes round, rectangular, irregular shape.

During operation, the sole of the jigsaw should be evenly pressed against the material. The tool should not be allowed to change position uncontrollably during operation - this can lead to breakage of the saw. It is better to cut hard materials in the lowest gear, that is, with a low sawing speed.

wood cutting

Using an electric jigsaw, you can cut irregularly shaped wood. It is advisable to buy a special compass that allows you to cut in a circle. Sometimes manufacturers sell a compass complete with a tool. At one end of the device is a spike that can be moved along the rod, allowing you to increase or decrease the radius of the circle. The jigsaw cannot rotate 90 degrees. To cut a rectangular bar in a tree, you need to make 4 cuts shown in the figure:

To start cutting not from the edge, but from the center of the board, you need to use a drill with a large diameter or a milling cutter. On the board, draw the outline of the hole to be cut. Drill holes are drilled at the corners of the contour. Then you can place the file in the hole and start cutting along the drawn line. Get a hole with rounded corners. To get right angles, you then need to cut the rounding with a saw.

Miter cutting

The tool can cut wood not only at an angle of 90 degrees. The minimum cutting angle in relation to the material surface is 45 degrees.

Electric jigsaws usually have 2 cutting angles - 0° and 45°, but professional models have much more options with different angle adjustment steps, for example: 0°, 9°, 15°, 22°, 5°, 25°, 30°, 45°.

The angle is set by adjusting the inclination of the sole. To make angled cuts, you need to attach the clamps to the table. Along the cut line, you can attach metal strips - tires. During operation, the sole will slide on the guide rail.

Working with metal and plastic

Working with these materials is similar to cutting wood with the exception of some nuances:

• before cutting mild steel, the blade should be lubricated with technical oil;
• cutting aluminum will be easier if you lubricate the blade with technical oil mixed with denatured alcohol;
• cutting PVC, acrylic, and other similar materials will be easier when the blade is wetted with water.

How to choose the right electric jigsaw?

Which jigsaw is best suited for specific tasks, and which one will be more versatile - it is advisable to consider these issues before buying. This section provides information that allows you to understand the features of the device, helping you make the right choice of an electric jigsaw.

Types of jigsaws

According to the type of power jigsaws are divided into 2 types:

1. Powered jigsaws- devices with higher power. The disadvantage of the model is the cable, which makes the work less convenient and safe.
2. Cordless jigsaws– of course, the biggest advantage is the mobility of such a solution. They do not have a cable, which must be handled with care during operation. However, it is necessary to charge the batteries, and in case of prolonged operation, use additional batteries. Over time, the capacity of power supplies decreases, which leads to the need to replace them and additional costs.

Tool Options

When choosing a jigsaw, it is advisable to carefully study its parameters that affect the operation of the device. Let's consider them in more detail.

• Power. The higher the power of the jigsaw, the better the device performs heavy work. Power can indirectly affect the maximum depth of cut. This setting provides longer operation without engine interruption. For different models, the power varies from 400 to 1000 watts.
• Cutting depth- indicated in relation to a specific material, differs for wood, metal.
• Strokes per minute affects the speed. The higher the frequency, the better the cutoff. The optimum stroke rate depends on the type of material. It is convenient when the tool has the ability to adjust the frequency, which allows you to work effectively with different materials - a higher frequency is applicable for soft materials, for hard materials, such as metal, the frequency should be reduced.
• Weight, dimensions. A lightweight device is more convenient to work with. Ideally, the design should be compact. Small dimensions, weight will provide comfortable work, convenient storage of the tool.

Optional equipment

Additional equipment must be purchased for the jigsaw: files, guides, and other elements.

Jigsaw blades

Saw blades are made of carbon tool steel (HCS) or (HSS), respectively machined, shaped. Files consist of:

• shank for fastening,
• corps,
• teeth.

The teeth are made of a stronger material than the body itself. Saw blades differ in design depending on the type of material they are designed to cut.

Jigsaw blades are designed for the following materials:

• softwood;
• hardwood;
• plywood;
• Chipboard, carpentry, fibreboard, laminated boards;
• building timber;
• plastic resins, epoxy resins;
• glass fiber reinforced plastics;
• kitchen countertops;
• wood with nails;
• a metal sheet;
• pipes, profiles;
• aluminum;
• non-ferrous metals;
• soft ceramic tiles;
• cast iron.

System for changing and fixing saw blades

It is worth paying attention to:

• saw blade installation,
• attachment system,
• ease of replacement.

For different types of work, you will often need to change the files, this operation should be easy. An important question is whether it is possible to install the blade without tools. This possibility significantly affects the usability of the jigsaw. There are several mechanisms for attaching a saw blade:

• Shoe mechanism - the blade is attached with a shoe, allows you to use various types of files. The mechanism is used in inexpensive tools.
• Screw mechanism - fastening occurs with a screw.
• Quick clamp is the most convenient mechanism, its disadvantage is that it is not suitable for all types of blades.

Taking into account the shapes of the shank, the following common types of saws can be distinguished:

1. with T-shank (European);
2. with shank 2T;
3. universal, 1/4″ with a U-tail (American);
4. Makita.

T-shank files (European)

The most popular, common on the market are files with a T-shank. With a jigsaw designed for type T files, there will be no problem buying consumables. Most manufacturers of power tools on the market use European style fasteners. The reason for the widespread use of the T-shank standard is the high reliability of the fastening, which is an important condition for efficient, safe operation. Important design features:

• easy mount,
• easy web removal
• the possibility of using keyless clamps, which greatly facilitate and speed up the maintenance of the tool.

Fast assembly and disassembly is a basic requirement among professional users. During intensive work, especially when cutting hard-to-cut materials, the cutting part wears out quickly, and their frequent replacement is a consequence of this. Therefore, the speed of changing the saw blade is important for productivity.

File material

• HCS files are designed for cutting soft materials - wood, fibreboard, plastics;
• HSS files - for steel, aluminum, ferrous metal;
• bimetal saw blades (BiM) are produced by electronically welding a HSS toothed strip with a HCS steel body. This results in a flexible, strong combination of the highest strength. Depending on the design, the teeth can be rectangular or curved.

Bi-metal saws are especially recommended for use in jobs that require high flexibility. It should be noted that the service life of bimetallic files is 2-10 times higher compared to HCS and HSS files (the service life depends on the hardness of the materials being processed).

HM/TC blades are bimetallic, as their body is made of HCS steel, and the working part, which directly cuts the material, is made of tungsten carbide alloy. These blades are designed primarily for very hard, difficult to cut abrasive materials such as tiles, ceramic tiles, bricks, cast iron, glass, etc. It should be noted that HM/TC files are not suitable for wood.

Like HM / TC tools, carbide toothed saw blades have a body made from HCS steel. These tools are used to cut reinforced plastic.

Guide rails for jigsaws

Guides allow cutting at an angle, bevel. The use of additional modules will help when cutting ceramic tiles. Using the guide even under normal conditions allows for more accurate and comfortable cutting.

Guide bar, photo

Blowing off dust, shavings

Such a device allows you to work more conveniently. For those who often use a jigsaw, it is advisable to consider buying a dust blowing jigsaw, working with it is more comfortable, efficient.

Illumination, laser beam

Illumination allows you to make the cut line more visible. The laser beam speeds up the work, allows you to abandon the marking of the material.

File shop, suitcase

Some jigsaws have space in the case to store a few extra saws. This is a convenient solution, we do not need to carry extra bags for accessories. Useful handy case for storing a jigsaw and necessary accessories.

Models, prices and manufacturers

• Cheap models can be bought for 750-1000 rubles, they have a power of 350-500 watts.
• For 1800 rubles, you can buy a Skil manual jigsaw with a power of 500 W, a speed of 800-3000 strokes / min.
• The BLACK DECKER KS501 tool with a power of 400 W, with a speed of 3000 strokes / min will cost 2000 rubles.
• A Bosch PST 650 jigsaw with a power of 500 W, having a speed of 3100 strokes / min, a quick-clamp saw blade mount costs 4200-4400 rubles.
• Black & Decker and Bosch jigsaws at this price point are certainly entry-level models.

Expensive tools will cost 30,000 rubles, for example:

• Metabo STA 18 LTX 140 5.2Ah x2,
• Bosch GSG 300,
• Bosch GST 18 V-LI 4.0Ah x2 L-BOXX.

For this amount, we get a professional device made from materials designed to last, durable, with a lot of extras.

The most popular manufacturers of jigsaws:

• Bosch;
• Black & Decker;
• Makita;
• Metabo;
• DeWalt;
• Festool;
• Skil.

Rating of electric jigsaws for the home

How to choose an electric jigsaw for home - video

Summing up

Which jigsaw is better to buy for home and garden? We need to answer the question of how often we will use the tool. It depends on whether we choose a jigsaw for home use or equipment for professional work. You should also consider what accessories are needed for us. Guides, a removable sole, dust blower, other devices are interesting solutions, but they raise the purchase price. Having adequately analyzed your own needs, you can choose the best jigsaw in terms of price-quality ratio.

The modern market offers a large selection of power tools not only for professionals, but also for use in the home workshop. If you need to cut a sheet of plywood, OSB, make a complex cut or cut an aluminum profile - a jigsaw will help you do it quickly and accurately. This tool is versatile and has a wide range of possibilities. But how to choose a good electric jigsaw for your home among the abundance of offers in stores? To answer this question, we have compiled a rating of the best electric jigsaws, based on feedback from participants in various construction forums and various categories of purpose for this type of power tool.

Jigsaw classification

There are several criteria by which the classification of electric jigsaws can be determined: the intended purpose of the power tool, the power source used, and design features.

According to their purpose, jigsaws are divided into:

• Professional, characterized by increased reliability, functionality and ability for long-term and intense operation;
• Household, less powerful, but easy to use. In terms of price and quality ratio, jigsaws are the best solution for equipping a home workshop;
• There are also industrial ones, which are designed for long-term work at a small woodworking enterprise.

Power type:

1. network (electric);
2. rechargeable.

Design features (type of movement of the saw blade):

• reciprocating mechanism;
• pendulum mechanism (pumping).

When buying a power tool, it should be borne in mind that the presence of a pendulum stroke increases the performance and service life of the files. However, in some cases it can worsen the quality of the cut, focus on the possibility of turning it off and adjusting the amplitude!

What to look for when choosing a jigsaw

Tool power

The capabilities of a jigsaw directly depend on the power of its electric motor. The power of manufactured electric jigsaws ranges from 350 to 1000 watts. A medium power tool of 500-600 W is capable, for example, of sawing a wooden workpiece with a thickness of 80-85 mm, and is quite capable of coping with an 8 mm sheet of steel.

Maximum stroke rate

The sawing speed of a jigsaw is estimated by such a parameter as the stroke frequency of the rod - the more often the saw blade moves, the faster the cut is made. For the most popular models, the maximum stroke rate is 2700-3100 strokes / min. For cutting materials of different hardness, frequency adjustment is provided.

Cutting depth

This parameter determines the maximum thickness of workpieces that this jigsaw can cut. This parameter is related to the power of the device. For jigsaws intended for domestic use, the cutting depth is from 50 to 120 mm for wood and from 5 to 10 mm for soft metal. Professional units can cut similar material up to 150-160 mm and 30-35 mm, respectively.

Of the auxiliary, but no less important functions of electric jigsaws, you should pay attention to:

• pendulum move;
• sole angle;
• smoothness of descent;
• function of supporting revolutions under load;
• chip blowing;
• backlight;
• laser pointer.

We will review the jigsaws of each class and rank the best, according to user reviews, models.

The best inexpensive jigsaws

Household electric jigsaws are designed for small amounts of work for a short time. Although they have little power and a relatively limited resource, they will help to make an even or curly cut at home. Household electric boats easily cope with cutting wood up to 70 mm thick and 4 mm steel sheets. Low price compared to a professional tool, simplicity and ease of use - the most optimal solution for a home workshop.

1. Interskol MP-55/500E

The budget electric jigsaw of the Russian brand Interskol MP-55/500E, despite its modest (within 2000 rubles) price, is equipped with a fairly reliable 500 W motor, a stamped sole, pumping and a pipe for working with a vacuum cleaner. Due to the equipment, which is rich for an instrument of this class, and the low price, it deserves positive responses from its owners. From user reviews, we can conclude that Interskol MP-55 / 500E is the best of inexpensive electric jigsaws for home and summer cottages, which will definitely please you in terms of the reliability of its work.

Advantages:

• pendulum mechanism;
• good power reserve;
• versatility of fasteners;
• thoughtful dust removal system;
• excellent kit.

Flaws:

• sometimes it is impossible to adjust the straight saw.

2. Bort BPS-710U-QL

The second position of the best inexpensive electric jigsaws is occupied by the Bort BPS-710U-QL household electric jigsaw, which has a good power reserve of 710 W and a rather large weight of 2.4 kg. The model has an adjustable stroke rate, a laser pointer, a quick-clamping mechanism for attaching a file and a 4-stage pendulum stroke. The power of the electric motor is sufficient for cutting through wood with a depth of 80 mm and steel up to 10 mm. Convenient controls and a squeak-free body make this good jigsaw an ideal value for money option.

Advantages:

• high power;
• comfortable rubberized handle;
• quality assembly;
• the presence of various adjustments.

Flaws:

• the laser marker is a little "mowed" to the side;
• when it breaks, it is very difficult to find replacement parts.

3. DeFort DJS-625N-Q

The cheapest jigsaw we are considering in this segment is the DeFort DJS-625N-Q, with a power of 570 W, equipped with a pendulum stroke with four steps, a quick-clamp saw blade, an adapter for a vacuum cleaner and a protective shield. Depth of cutting wood 65 mm, steel sheet - 8 mm. A power tool without any bells and whistles, but copes well with its direct duties, after the purchase you definitely will not regret that you bought it.

Advantages:

• the possibility of cutting at an angle;
• saw speed;
• lies comfortably in the hand;
• spare brushes included.

Flaws:

• build quality is not always good.

The best jigsaws for quality and reliability

When choosing electric jigsaws, which are rightfully considered the best, we will focus on well-known manufacturers of power tools Bosch and Makita. The range of electric jigsaws from both companies is wide and varied. If Bosch divides its products into household and professional, then the Japanese corporation produces only professional power tools. But from both manufacturers, the products are of excellent quality. Let's make a comparison using the example of the Bosch GST 850 BE and Makita 4329K models, which have firmly taken their places in the TOP 9 best jigsaw models.

1. Bosch GST 850 BE

The Bosch GST 850 BE jigsaw belongs to the class of semi-professional tools. Electric motor power 600 W, cutting depth in wood 85 mm, aluminum and steel - 20 and 10 mm, respectively. There is a pendulum stroke, blowing off sawdust, smooth descent, electronic adjustment of the frequency of the saw blade. High-quality and reliable assembly of the jigsaw guarantees comfort and safety in working with the tool. Someone may not like the lack of backlight, laser mark and cast tabletop, but it cuts perfectly. A reliable workhorse with an adequate price that will definitely not let you down.

Advantages:

Power;
complete absence of vibration;
long power cord;
build quality and reliability.

Flaws:

• heavy for vertical work.

2. Makita 4329K

The light and compact Makita 4329K jigsaw is less powerful than the Bosch GST 850 BE, but its price is an order of magnitude lower. Light weight (1.9 kg), maneuverability and the ability to adjust the sawing speed allow you to make high-quality cuts. The maximum cutting depth for wood for this jigsaw is 65 mm, steel - 6 mm. The tool, like its German counterpart, is ascetic, has high performance and excellent ergonomics.

Advantages:

• optimal balance of reliability and ergonomics;
• light weight;
• quiet work;
• case included in delivery.

Flaws:

• lack of a mechanism for quick replacement of the file;
• difficult to set the angle of the site.

The best cordless jigsaws

When working in places where there is no access to the electrical network, jigsaws with a battery are often used. However, due to the low power and speed of the file compared to network models, they are mainly used for processing materials of small thickness. But it is worth noting that this type of power tool is simply indispensable in the absence of an electrical network at the workplace.

1. Bosch GST 10.8 V-LI 0

The Bosch GST 10.8 V-LI 0 cordless jigsaw belongs to professional class tools. Equipped with a built-in backlight, stroke frequency adjustment and a quick-clamp saw blade attachment, a 3-stage pendulum stroke, and a battery charge indicator. It copes well with cutting wood up to 70 mm thick and steel up to 3 mm. The rubberized, conveniently sitting electric fret saw in a hand provides reliable grip. With a battery voltage of 10.8 V, it has quite a lot of power and light weight.

Advantages:

• excellent ergonomics;
• battery overheating indicator;
• the presence of automatic blocking;
• a light weight.

Flaws:

• Supplied without batteries and charger
• lack of blowing of the working area.

2. RYOBI R18JS

One of the best cordless electric jigsaws RYOBI R18JS is in the leading position in this category of the rating, the model is distinguished by an even cut, has a work area illumination, a quick-clamp saw blade attachment and a pendulum stroke. It perfectly cuts sheet steel up to 6 mm thick, and the depth of saw wood was 101 mm, while battery consumption is quite economical. It has an adjustable swing of the pendulum, convenient speed adjustment, located under the thumb. According to the reviews of the owners, RYOBI R18JS will be an excellent choice for those buyers who do not have the opportunity to work from the network, but who need good performance.

Advantages:

• smooth saw;
• high work efficiency;
• simple and easy adjustment of the angle of inclination;
• great build quality.

Flaws:

• lack of blowing sawdust;
• weight and dimensions.

The best professional jigsaws

Professional grade electric jigsaws are characterized by high power and productivity. As a rule, such a tool can easily cope with high, long-term loads, therefore it is used by builders and in the manufacture of furniture products. If you are planning a constant larger amount of work, then be sure to take a closer look at the jigsaws from this category of our rating.

1. DeWALT DW333K

Professional electric jigsaw DeWALT DW333K, thanks to a powerful engine (701 W), can be easily used for shaped sawing of small parts and cut materials of various thicknesses and densities. The model has a saw speed adjustment, a quick-clamping mechanism, a soft start and a three-stage pendulum stroke. Plus to all the advantages is a good package. According to the owners, this is the best of the electric jigsaws in the ranking, which, in terms of functionality and reliability, is really worth the money.

Advantages:

• smooth running and sawing speed;
• powerful electric motor;
• excellent equipment;
• electronic adjustment of the frequency of the saw blade;
• lower position of the guide roller.

Flaws:

• lack of illumination of the working area.

2. Makita 4351FCT

One of the best popular electric jigsaws designed for heavy loads, the Makita 4351FCT, can easily cut 10 mm steel and wood up to 135 mm thick. The most powerful electric jigsaw and at the same time the most expensive of the models presented in the rating. Powerful electric motor (720 W), electronic adjustment and additional functions guarantee high performance and quality of cut. The model differs in excellent ergonomics, a rich complete set.

Advantages:

• electric motor with a large power reserve;
• LED lights;
• the ability to quickly replace the saw blade;
• low vibration and noise.

Flaws:

• not found.

Which electric jigsaw is better to buy?

As you can see, in order to choose the right jigsaw, it is necessary to take into account a number of factors that affect both the performance of the tool and its cost. First, decide on the type of work in which the power tool will be used. For home use, a tool with a lot of additional features is not the best option. In practice, many functions remain unclaimed, and the cost of a jigsaw sometimes increases significantly. Before buying, be sure to familiarize yourself with the characteristics of the product, check its ergonomics (the way it lies in your hand). If you can test the power tool in the store, be sure to do it. We hope that our recommendations and a review of the best models of electric jigsaws will help you in choosing a reliable and high-quality assistant for your home.

An electric jigsaw is an indispensable tool that every home craftsman needs on a par with a drill. The versatility of this device allows it to be used for or as a hacksaw for wood and even metal. Considering the versatility, it becomes clear that carefulness can not hurt when choosing such equipment. Today we will consider the characteristics that a quality one should have and present the TOP 10 best electric jigsaws according to consumer reviews.

An electric jigsaw is a device with which wood, chipboard, and even metal are cut into figured blanks for various purposes. Similar equipment is used in furniture production, the manufacture of figured decorations, for domestic purposes (as an auxiliary tool). After all, if you have an even bar, you can ideally cut boards, PVC or NDF panels. The angle of inclination is also adjustable, which allows you to chamfer or dissolve the fiberboard along at the desired angle. Even work in the garden to remove the dried branches of trees is within his power.

Design features of the electric jigsaw

What a jigsaw looks like, every home master knows. But how it is arranged, it makes sense to disassemble. The basis of this equipment is an electric motor, which rotates an eccentric wheel (a roller with a displaced center) through a gearbox. It is the eccentric that transmits reciprocating movements to the canvas.

An electric jigsaw for wood or metal is equipped with an electronic rheostat for speed control. This is necessary - the same speed will not work for different materials. On some models of household electric jigsaws, they are installed to illuminate the place of the cut, as well as a bag for collecting sawdust that appears during operation.

Classification of electric jigsaws by nutrition and application

Despite the fact that today the line between a professional and a household tool has noticeably rubbed off, this did not affect the classification of electric jigsaws. Consider what groups such equipment is divided into. The main ones are:

• Professional network jigsaws;
• Professional rechargeable;
• Household network;
• Household battery equipment;
• Industrial devices.

It is necessary to understand what is the difference between these groups.

Network and battery professional electric jigsaws and their features

Network equipment is more powerful than battery equipment. After all, if you imagine the power of a battery comparable to the mains, then it will be heavy and bulky. A logical question arises: “Why then such a battery?”. The only disadvantage of network equipment is its "attachment" to. If you need to do work on the street, you will have to pull an extension cord, and this is not always convenient.

Professional equipment is distinguished by extended functionality, blade position settings (files), power and endurance (the ability to work in aggressive environments and a hard rhythm).

Good to know! If you need a jigsaw for the home, and it will be used infrequently, you should not purchase professional equipment, the cost of which is several times higher.

Household jigsaws of mains and battery type

Household appliances have less power. But it is enough for housework. Studies have confirmed that such equipment with a power of 350 W is capable of sawing boards with a thickness of 70 mm. And household jigsaws offered by the manufacturer today consume 600 ÷ 700 watts. Draw your own conclusions.

A household electric jigsaw, despite sufficient power, is only suitable for short work. A home workshop, where the owner is engaged in the processing of wood "for the soul" - this is their element. But if planned, a household electric jigsaw will not work. Here you need a professional device that can work 7-8 hours a day.

Industrial jigsaws: differences from professional ones

Industrial devices are stationary. They represent. Wood is sawn on them differently than with an industrial electric jigsaw - it is not the device that moves, but the material.

Such machines are installed in workshops and rarely move. They are used in the furniture industry and are able to work up to 24 hours a day. A home master, regardless of woodworking employment, does not need such units - their cost is significant.

Summarizing the above information, we will answer the question of which is better to buy a jigsaw for the house as follows: if construction is not planned, and a jigsaw is needed only periodically, the option with a household tool will do. For construction or small furniture production - professional.

The best jigsaw blades: selection criteria

Before buying a blade, you need to clarify which shank is suitable for your electric jigsaw model. There are only 4 options, and now we will consider them:

Photo	Shank designation	Explanations
	T-shaped	The first manufacturer to introduce such a shank was BOSH. Today, such giants as Makita, Metabo, Hitachi, Skil, AEG, DeWalt, Sparky, Interskol have switched to such blade shanks.
	U-shaped	Shank for shoe and screw clamps. Installed on old models "Skil", "DeWalt", "Wolf", "Ryobi", "Stayer", "Black&Decker".
	Shank Makita	Only old Makita models

It is impossible to say which of them is better. If this is not a Chinese fake, then the quality is not in dispute. The main thing is that the shank fits the tool seat. The length of the canvases varies in the range of 40÷250 mm. But when purchasing files, it is worth taking into account the capabilities of the tool, its power.

Which jigsaw to choose and what to look for when buying

Before choosing an electric jigsaw for your home, in addition to power, you should pay attention to:

• the maximum stroke frequency of the rod - a frequency of 3,000 ÷ 3,200 strokes per minute will be sufficient for operation;
• cutting depth - this parameter determines the thickness of the material that the tool can cut through;
• additional functions - this can be adjusting the angle of the sole, soft start, maintaining speed under load, blowing chips, lighting or a laser cut pointer.

When purchasing electrical equipment, it is necessary to familiarize yourself with the certificate of conformity for the goods and clarify the terms and rules of warranty service from the sales assistant. The device must be in perfect condition, without chips, cracks or scratches. High-quality equipment is supplied by the manufacturer in plastic cases.

After checking the functionality of the tool in the store, the seller is obliged to fill out the warranty card in front of the buyer, putting down the date of sale and seal. If even one of these conditions is not met, it is better to refuse the purchase. After all, even an inexpensive model can spoil the mood if it stops working on the second day.

TOP 10 best electric jigsaws 2017-2018

In the rating of electric jigsaws, we will consider the brands and models of household appliances that became the most purchased in late 2017 and early 2018. We will not give the cost, we will talk about it later. Our task now will be to understand which of the models are most popular and for what reasons.

10th place - electric jigsaw AEG PST 500 X 428260

Despite the fact that this tool is in tenth place, you can’t call it bad - the others didn’t make it into the TOP-10 at all. This jigsaw failed not only in power (only 440 watts). The power button, located inconveniently (at the top of the handle) often fails (according to customer reviews). There is no speed controller, as well as control of the cut line.

Jigsaw "AEG PST 500 X 428260" - tenth place, but he is in the TOP

9th place - network Bort BPS-800-Q

The Bort BPS-800-Q electric jigsaw could compete for a higher place, but with a power of 800 W and a cutting depth of only 80 mm in wood, this is impossible. Although he takes 10 mm steel. The tool weighs 2.6 kg. Buyers note oddities in the work. When sawing wood thicker than 50 mm, the blade leads to the side. Plus - blowing sawdust from the cut.

Jigsaw "Bort BPS-800-Q" - problems with cutting wood, thicker than 50 mm

8th place - electric jigsaw Interskol MP-100E

Powerful unit of 705 watts. The cutting depth is 100 mm in wood and 10 mm in steel. Weight about 3 kg. Among the shortcomings, the owners note strong vibration (which will subsequently lead to loose parts) and the fact that the tool does not hold the given strip well on long cuts.

7th place - stylish and ergonomic Ruobi CJS 180L

The 18 V battery only allows you to work with wood, 40 mm thick, which is a rather mediocre indicator. Web stroke frequency - up to 2,100 units / min. The gearbox is rather weak, it consists of plastic gears. This means that if the permissible thickness of the material is exceeded, the teeth can “lick off”. A plus is a laser cut pointer and smoothness, softness of work. Seventh place in today's ranking.

6th place – features of Metabo STEB 65 Quick

With a power of 450 W, the cutting depth in wood is only 65 mm, in soft metals - 6 mm. Pretty modest characteristics for network equipment. True, and the weight is small - less than 2 kg. Supports a system of instant cloth change, no backlight. Those who have purchased this tool complain about insufficient adjustment of the blade holder.

5th place - cordless jigsaw Dewalt DCS331

The stroke rate of this electric jigsaw is higher - 3000 units / min. Cutting depth in wood - 135 mm, in soft metals - 10 mm. There is no illumination of the working area, which upsets. There is no connection to a vacuum cleaner or dust collector either, instead, blowing off sawdust. Weight more than three kg. Fifth place.

4th place - electric jigsaw with a powerful battery AEG BST 18X

The battery of this model is 18 V, but the thickness of the cut is small. It is 40 mm for wood and 10 mm for soft metals. The blade stroke rate is 2050 strokes per minute, weight is 3.5 kg. With such a powerful battery and significant weight, the performance could have been better, and therefore fourth place.

3rd place - famous Makita JV0600K

Powerful device of 650 watts. Possible cutting thickness of wood - 90 mm, soft metals - 20 mm, steel - 10 mm. A rheostat for limiting the maximum speed is installed (wheel behind the handle). Weight - 2.4 kg. Instant blade change, ability to connect to . The disadvantage is the lack of illumination of the cut place and the third place in the rating.

2nd place - electric jigsaw Hitachi CJ 14 DSL

14.4 V cordless device. Cutting depth - 135 mm in wood and 10 mm in soft metal. It is possible to connect a vacuum cleaner to collect sawdust. Replacing the blades is simple - you just need to press two buttons on the sides and the latch is removed. Equipped with saw bands. Weight 2.6 kg (with battery). Deserved second place in today's jigsaw rating 2017-2018.

1st place - as always, German quality is ahead - Bosch GST 65B

Wood, plastic and aluminum are not a problem for this tool. A properly selected canvas can easily master these materials. During testing, this electric jigsaw, although with difficulty, coped with a profiled sheet and 3 mm metal, which already says a lot. The possible thickness of non-ferrous (soft) metals is up to 12 mm, and wood - up to 65 mm.

The power of the Bosch GST 65B electric jigsaw is only 400 W at a rotor speed of 3,100 rpm. Convenient tool, durable in work, well-deserved first place in the rating.

In the arsenal of a real owner, there must be several high-quality, versatile tools with which you can quickly and easily perform any repair work around the house. You can safely add a jigsaw to this list. In the article, we will consider the scope and design of the tool, its main characteristics and possible additional functions, and also give tips on which electric jigsaw to choose for the home and select the most suitable models.

1. Brief description and scope

A jigsaw, also known as a jigsaw, refers to an electric hand tool used for sawing various materials. It has a small weight and modest dimensions, so that the duration of continuous work does not depend on the need for periodic rest of the performer. Any cut occurs with a saw blade that performs reciprocating movements. By choosing one or another type of saw, it is possible to process materials of different density and thickness, perform complex cuts and much more. And it's not just the ability handle such familiar materials as wood or metal, but also, , a rock, plastic and glass.

The scope of the jigsaw is quite extensive:

In fact, this is not the whole list. Having learned about all the possibilities of a jigsaw, you will see for yourself that it is really almost indispensable in the household and is multifunctional.

2. The design of the jigsaw

Most often, the owners of several serious units of a working tool prefer to fix minor malfunctions on their own and can determine exactly when they can’t do without the help of a specialist and which part needs to be replaced. It is no wonder that such knowledge directly depends on the understanding of devices and the principle of operation of a particular device. Consider in detail the design of the jigsaw shown in the figure.

Separately, I would like to dwell on jigsaw handles. It can be of different forms, on which the convenience of performing certain works directly depends. There are three options:

Also, depending on the design, jigsaws can be divided into two large groups:

3. Advantages and disadvantages of working with a jigsaw

Any tool has both advantages and some disadvantages. Perhaps knowing everything Benefits jigsaw as a hand tool, it will be easier for you to make your choice or you will finally be convinced of the need to purchase it:

Among shortcomings can be distinguished:

• The power limit of the tool is a limited parameter that directly affects the weight of the jigsaw. The more powerful the model you need, the more it will weigh. Although, this drawback applies to all tools;
• The maximum thickness of the processed material is also limited;
• Short stroke of the cutting blade;
• Given that the saws are attached at one end, they must be thick enough so that they simply do not break every time they have to deal with hard materials. And, as you know, the thicker the canvas, the lower the indicators of its flexibility. This may affect the ability to perform shape cutting;
• When cutting thick parts, chip removal is noticeably worse, which in turn leads to a decrease in saw speed.

4. Main technical characteristics

Obviously, the more powerful the model, the faster and more productive it is, that is, it is able to cope with a greater thickness of the part. But this is not the only important parameter:

5. Overview of additional functions

In addition to the main characteristics, there are a number of useful features that modern manufacturers have generously endowed their products with. Naturally, the more "twists" at the tool the higher will it price. However, to operate with the established stereotype “the more expensive the better” in this case is not worth it. Perhaps some of the functions will turn out to be absolutely unnecessary and useless for you, so why overpay for them?

• AVR - anti-vibration system. The presence of this function significantly reduces the vibration transmitted to the performer from the engine through the housing. Thus, this contributes to less fatigue and greater controllability of the jigsaw. It also increases tool life. It is advisable to purchase models with ATS if you plan to perform work often and for several hours in a row;
• Frequency control saw blade travel. This feature is very useful if you intend to work with a jigsaw with different materials. This moment also determines the possibility of achieving a clean cut. After all, it is better to process wooden blanks at a high stroke rate, while it is possible to avoid the formation of teeth on the edges of sheet metal only at low speed;
• Pendulum move. The presence of this element makes it possible to move the saw not only up / down, but also forward / backward. This greatly accelerates the cutting speed, but worsens its cleanliness and reduces the controllability of the tool. Most often, models with this function are purchased if necessary, often saw a large number of wooden parts;
  
• Saw at an angle. The ability to make an oblique cut is possible only if the sole of the tool can change its position. In this case, the angle can be 0-45 degrees. You will have to set the desired angle yourself, focusing on the appropriate marks. More expensive models have a clearly fixed position of the sole at an angle of 15, 30 or 45 degrees. After tilting it to the required angle, it will be fixed by the built-in limiter. It is advisable to purchase jigsaws with this function if you are engaged in the production of furniture or, for example, window glazing beads;
• Smooth start. The possibility of a smooth start, firstly, will allow you to maintain the integrity of the workpiece at the beginning of work, and not tear out pieces at the beginning of the cut. Secondly, it will protect the motor from a large starting current;
• Opportunity vacuum cleaner connection. In this case, a special branch pipe for removing sawdust will be connected to the sole of the jigsaw. The function is useful even, which allows for “clean” work and minimizes the amount of wood or metal dust that the user inevitably inhales during work;
• Backlight drinking places. A handy little thing that makes the markup more visible, which means cutting will be more accurate;
  
• laser marker. It can be implemented as a dot or a line. Allows you to foresee the direction of the cut and prevent its deviation from the markup;
• Quick change system saw blade. Allows you to remove a worn or broken saw with one pull of the lever;
• blowing dust and sawdust from the cutting line. In some models, the fan, which is necessary to cool the engine during operation, can also perform an additional function of blowing debris from the workpiece;
• Protective screen. It is designed to protect the organ of vision from getting dust particles or chips into them, and they are made of transparent plexiglass;
• table for mounts. In the presence of this element, a conventional portable tool can turn into a stationary one.
  

6. Factors influencing the choice

After you have familiarized yourself with all the possible additional functions and technical characteristics, you need to summarize and highlight main factors which should influence the choice:

7. TOP 3 most "survivable" jigsaws for the home

Of course, after such a careful selection, I would like to purchase a really reliable tool for long-term use. The variety of products offered is unrealistically large. And the more you look directories, the more you can get confused. It has long been known that in order to really buy a thing, you need to pay attention to trusted manufacturers and not be stingy. We have selected for you several models of electric jigsaws, which confirm their durability and reliability with a large number of positive reviews from real consumers. For your information - the serial number in the list does not play a role.

• Everyone starts their reviews with the Makita type, etc., we also did not ignore this brand, but we decided to start with a manufacturer originally from Simferopol, which is famous for its successful models of electric jigsaws. Many professionals point out that the firm model Fiolent PMZ-600 E It has been operated by them for a long time in a fairly intensive mode and has never failed. The jigsaw can handle up to 85 mm thick wood, up to 10 mm thick steel and up to 20 mm thick aluminum. In this case, the engine power is 600 W, and the saw blade movement frequency is 2600 times / min. Experts note the high quality of the filling of the tool, which definitely has a margin of safety. The sole of the tool is made of thick stamped steel, and has the ability to tilt at an angle of 45 degrees. There is a function for adjusting the speed and a pendulum stroke, which can be turned off if necessary. TO shortcomings can be attributed to the weight of the model, which reaches 2.4 kg. Maybe at first, it will not be very convenient and hard for you to work;
  
• Makita 4351 FTC. A jigsaw from a well-known manufacturer of high-quality tools has a mushroom-shaped handle and is more suitable for those who have organized a small carpentry workshop in their garage or in the country, rather than for one-time household use. At the same time, people testing this device noted that the body of the jigsaw is quite large and wide. It can be problematic to grasp the tool with one hand and at the same time securely fix it. The motor has a power of 720 W, and the frequency of saw blade movements can be adjusted and lies in the range of 800-2800 times / min, the blade stroke is 26 mm. The high power is reflected in the weight of the tool, which reaches 2.4 kg, like the previous model. The jigsaw works quietly, does not create strong vibrations, easily copes with large thicknesses in accordance with the technical specifications specified by the manufacturer. The sole is very solid, made of aluminum, has a fixation in the zero position and at an angle of 45 degrees. The set includes a plastic anti-slip and protective pad on the sole. The chuck is quick-clamping and securely fixes blades of different thicknesses. Of the additional functions are present - smooth running, pendulum three-mode running, illumination of the working area;
  
• Bosch PST 650. A very convenient and compact jigsaw with a D-handle from a well-known German manufacturer immediately captivates with its weight, which is only 1.6 kg. At the same time, the engine power is 500 W, and the maximum number of reciprocating movements of the saw element is as much as 3100 times per minute. Thanks to such a high speed, the maximum thickness of the wooden workpiece, according to the data from the manufacturer, is 65 mm, steel - 4 mm. The sole of the tool is made of durable steel, has a rigid fixation in the zero position and at an angle of 45 degrees. The chuck is also quick-clamping, however, it does not fix all saw blade thicknesses. The jigsaw is equipped with a function for cleaning the working area from sawdust, which can be adjusted. It is safe to say that this is one of the best and trouble-free models for home use.
  

It is the wide variety of working equipment that makes the jigsaw so versatile and indispensable. Probably, you could not help but notice that all saw blades have different markings on their shanks. She not only says what material the canvas is made of, but also what it is best to use.
Consider standard markings:

• HSS- a saw made of high-speed alloy steel. Designed to work with various stones at high speeds - with or, or with metal. Differs in the increased durability, hardness and resistance to high temperatures;
• BIM- a canvas made of bimetallic material. Suitable for cutting hardwood, laminate, ceramic tile or plexiglass;
• HCS– cutting element made of high carbon steel. Suitable for processing almost all types of wood, except for very hard, or plastic;
• HM– extra hard tungsten carbide alloy blade. Most often used for cutting ceramic tiles or fiberglass;
• CV- a saw made of chrome vanadium steel. It has increased characteristics of plasticity, viscosity and elasticity, which makes the canvas ideal for working with soft materials - drywall, chipboard, fiberboard and some types of wood.

In addition to the material and purpose, saws differ in shank shape and may be:

• T-shaped;
• U-shaped;
• With two holes - marking MA.

To work with the tool was easy, and its service life was maximum, it is necessary to observe simple rules:

10. Most common malfunctions

Frequent and prolonged or not quite correct operation of any tool will sooner or later lead to some kind of malfunction. Consider the most common mechanical types of breakdowns electric jigsaws, in which the engine itself continues to work normally, but it is not possible to achieve an accurate or clean cut:

• Crooked saw. It happens that the saw blade leads significantly away from the intended line during operation. In this case, either the rod itself or the saw attachment mechanism may be faulty. Also, do not exclude the possibility of wear of parts or their excessive contamination. To begin with, it is worth trying to remove the above elements and clean them thoroughly. If the problem persists, replacement of fasteners or stem is inevitable;
• Too perceptible vibration and noise. If you notice that over time, the device began to make sounds that were not characteristic of it before and vibrate very strongly, this may be due to the failure of the gearbox. There may be no lubrication or the teeth on the gear have collapsed. For an accurate determination, you need to remove part of the case from the side and inspect the mechanism. If there is a breakdown, the mechanism must be replaced;
• strong jolts at work. If you feel that the jigsaw began to hit hard during the cut, this may be due to the failure of the pendulum mechanism or rod, which will have to be replaced. Before replacing, try spinning and completely cleaning and lubricating the mechanism, sometimes this is enough.

Not always malfunctions can be the result of failure or breakdown of one or another part of the structure. Sometimes out of order maybe electronics. Then the characteristic types of breakdowns will be:

Previously, in order to assemble the entire set of necessary tools, it was necessary to acquire simple and primitive things. Today, without a tool with an electric motor, it is impossible to organize repairs and construction. A good tool for processing wood, drywall, tin and much more at home is an electric jigsaw. For those who do not know what it is, let's just say - this is a small electric saw with a drive. How to choose an electric jigsaw for the home?

Hello dear readers of my blog. Today we will talk about the choice of such a tool as a jigsaw. It is practically indispensable in the household and should be in every owner.

Now there are a lot of different manufacturers offering such products, but how not to make a mistake in choosing and not to purchase a low-quality tool. To do this, you need to know at least a little what a jigsaw is, what functions it has and for what purposes it serves.

But do not give up with the right approach, choosing an electric jigsaw for your home is not difficult. I hope this article will help you make the right choice.

Which jigsaw to choose for home household or professional

First of all, you need to decide for what purposes you need this tool, and how often you will use it. I understand that you need a jigsaw to cut, but sawing can be done in different ways.

Someone can choose a tool to cut plywood with a thickness of no more than 20mm, and someone saws a board with a thickness of 50mm or more, for these cases completely different models are needed.

In the first case, any household model is suitable, and in the second, a serious professional tool is needed. So you need to clearly define the scope of work in order to choose the right jigsaw for your home.

To make it clearer, I’ll explain it this way: You don’t need a professional tool if you use it, roughly speaking, once a year, but I also don’t recommend you take an amateur model if a lot of work will be done with a jigsaw. In principle, this rule applies to any instrument. It will be an unsuccessful investment of money that you just lose.

• household models designed for rare use, have a low power reserve and the thickness of the material cut. It also does not include additional features such as a quick file change, a laser pointer and many other useful things. They have a fairly low price.
• Professional Models designed for high and long loads have high power and cutting thickness. They have many additional features. But together with all the advantages they have a high price.

In general, we will not focus on what is household and what is a professional jigsaw, just make a choice based on your needs and scope of work. Very often people write reviews about the fact that Chinese jigsaws are bad.

As I already wrote in the article, you should not pay attention to the country of the manufacturer, since now all the famous companies have already moved their factories to China, but they monitor the quality of the products. It is fundamental not to buy Chinese because of where it is not made correctly. Let's move on to the characteristics of jigsaws.

The main characteristics of electric jigsaws

This is the most important, these characteristics should be paid attention first of all. In most cases, they determine the quality and class of the tool. Let's look at all the characteristics separately.

Cutting power and thickness

The very first thing to do is to look at the power of the tool, the higher it is, the thicker the material the jigsaw can cut. Jigsaws of high power are able to withstand long-term high loads. The higher the power, the more the unit can withstand.

Power varies in the range from 400W to 1000W, maybe a little more or a little less, but the picture looks like this. A tool with a power of up to 500 W is considered a household one, and above 500 W a professional one.

The power of the jigsaw directly affects the thickness of the cut. The cutting thickness is a value that indicates what material and what maximum thickness this model can cut. Usually they indicate the thickness of the saw cut in wood and steel, as a rule, the saw cut in wood is always larger than steel.

With increasing power, the thickness of the cut also increases. On household jigsaws, the thickness of the saw cut in wood reaches 70mm, and in steel up to 5mm. At home, this is not a bad indicator. In professional jigsaws, you can cut wood up to 140mm thick, and steel up to 10mm. When sawing softer (such as aluminum) metals, the thickness of the cut reaches up to 20mm.

When choosing any electric jigsaw for your home, think about what thickness of material you work with most often and get a jigsaw with a slightly larger performance for a power reserve.

pendulum mode

First you need to figure out what the function is. This function lies in the fact that when sawing, the file moves not only up and down, but also pushes forward. This effect allows you to increase the cutting speed, and reduces saw blade wear. But there is also a reverse side of the coin, the cleanliness of the cut decreases significantly. Chips and burrs appear. Also in this mode, you can not cut metal.

Almost all modern jigsaws are equipped with a pendulum function. You can find out whether it is on the model or not by the presence of a switch on the side of the tool.

Usually the function goes to 3 positions, the larger the number, the stronger the tilt of the file. But there are exceptions, and on some models there are from 4 to 8 positions, but this happens only on professional models.

This mode is only suitable for straight line sawing. If you are going to cut complex shapes, then when choosing a jigsaw for your home, you should not pay attention to this function, since it will not be useful to you.

saw stroke frequency

The cutting speed of the jigsaw directly depends on this parameter. This value shows how many moves the file makes per minute. On different models, the number of moves varies.

Of course, when choosing a jigsaw for the home, it is better to stop at medium or high values, since the low value of this parameter is an indicator of the low quality of the tool.

On household models, most often the saw stroke frequency is from 2000-2800 rpm. On professional electric jigsaws, this figure reaches 3000-3200 rpm.

Another important parameter is the stroke length of the file. This is the distance from the bottom dead center of the file to the top dead center. The greater this distance, the longer the file will last you, and the better it will cut.

Handle shape

On jigsaws, the shape of the handle is also different, there are two types of bracket-shaped and mushroom-shaped. The first got its name due to the fact that its shape resembles a bracket. By the way, this is the most common type of handle, which modern models are most often equipped with. This form means one-hand operation.

The second type of handle is less common, but still found on some models. As you may have guessed, it got its name because its shape looks like a mushroom. They say that curly cuts are best done with this shape of the handle.

However, it still depends on your individual needs. Take one and the other type in the store, hold it and decide for yourself what will be more convenient.

What is the sole, what should it be

The sole is the platform of the jigsaw on which it stands when sawing. The quality of the cut depends on its type. Also, a high-quality platform allows you to make cuts at an angle. There are two types of soles - stamped and cast. Let's look at each type separately.

cast

The molded sole is installed on expensive professional models. The presence of such a platform indicates the good quality of the tool. As the name implies, the sole is made by casting. It has a greater thickness and rigidity than the stamped sole.

stamped

The stamped sole is installed on a cheaper low-quality tool. It is made from thin sheet material by stamping. Often has insufficient rigidity, because of this, the quality of the cut is reduced (often the cut leads to the side).

If you are interested in high quality sawing, then choose a jigsaw with a cast sole, but if it is more important for you to save money, then with a stamped one.

Angled outsole

Almost every electric jigsaw has this parameter. They differ only in the way they tilt. For some models, this is done inconveniently and for a long time. In places where the sole is in contact with the jigsaw, there are special screws that are loosened with a hexagon, the angle is set, and then all the screws are tightened again. Agree it is long and inconvenient.

In other models, tilting is done much faster and easier. Using a special lever, you loosen the platform, set the slope and set the lever to its original position. Note that all this is done without the help of a tool.

Again, think about how often you will use this feature, if the answer is “not often”, then you don’t need a model with a fast slope. If often, then choose a jigsaw with a quick tilt, without hesitation, it will save you a lot of time and nerves.

In conclusion, I want to say that there are inserts and overlays on the soles. They are used for sawing fragile materials so that they do not leave scratches after cutting.

In a cheaper version, these are plastic lining; in a more expensive one, these are metal inserts.

Additional functions

I would like to talk about various additions to jigsaws separately. Although these functions are not necessary, they still make the tool easier to use. Some may seem completely useless to you, but still they exist, which means that there is a demand for them.

Keyless file change

A very handy and necessary feature. It is mainly equipped with professional electric jigsaws. Everything happens quickly and conveniently.

On conventional models, the saw blade is replaced by loosening special feints, and in keyless replacement, this happens by pressing a special lever. The principle of the description is similar to the inclination of the sole. Choose an electric jigsaw for your home with this feature and you will not regret it.

Illumination and laser cut pointer

Another addition looks like a backlight. Helps in conditions of poor lighting or its absence. There is an LED on the front of the tool that illuminates the space in front of the jigsaw. In most cases, of course, this function is not needed, but still there are cases where it is used.

Another addition may be a laser pointer that indicates the cutting line. It is positioned so that it projects the line of the cut onto the canvas that you are sawing, and you can see where the cut will be.

Speed ​​control

Adjusting the speed, in fact, means adjusting the number of strokes of the file. It is very easy to determine the presence of such a function by the presence of a wheel on which numbers are applied. You can increase or decrease engine speed by turning the wheel.

This feature is useful when sawing plastic, metal, and all such materials that need to be cut at low speeds. Usually this function is located on the top of the handle or on the side.

Stop for straight cuts and circular cuts

An emphasis for an even cut is included with almost every jigsaw. So when choosing an electric jigsaw for your home, make sure that there is such an emphasis, it will most likely come in handy.

This addition looks like a ruler with a perpendicular stop at the end. One side is clamped into the sole of the jigsaw to the desired length, and with a perpendicular stop to the edge of the workpiece. Thus, when sawing, a cutting line parallel (to the edge of the workpiece) is obtained.

The same stop can be used in cutting circles. But it needs to be fixed in the center of the circle, so that it can rotate around its axis. In general, for these purposes there are special stops that are well fixed in the center of the circle. There are also 2 in 1 stops.

Removal of sawdust from the place of cut

A rather useful function, since in the process of sawing very often the cutting line is thrown with sawdust, and you do not see where to cut. This is where it will save you, the removal of sawdust.

Airflow occurs in front of the jigsaw, blowing sawdust in different directions, clearing the cut line. It happens that sawdust is sucked into a special pipeline running above the sole. A special sawdust bag is put on the end of this tube, or a special vacuum cleaner is connected.

Corded or cordless tool

Now a cordless tool is very popular, but this does not apply to jigsaws. Perhaps in the near future something will change, but now everything is as it is.

First of all, cordless jigsaws have several disadvantages. One of them is the very high price of the tool and its consumables, such as spare batteries and chargers.

Another drawback is the short battery life, so the issue of autonomy has not been fully resolved. The battery life is also limited. The advantage is that you can use the tool without electricity. It is convenient in those places where there is no possibility to connect to the mains.

In the network version of the jigsaw, there is only one minus. It lies in the fact that you will not be able to use the tool without electricity. And the advantages are obvious, it works without recharging in any mode. No need to buy any batteries and chargers.

Famous manufacturers of jigsaws

Let's look at the most popular manufacturers of electric jigsaws, both for home and professional models.

• Black& decker US company founded in 1910. Produces professional jigsaws equipped with rich functionality.
• bosWithh— German company producing both professional and household jigsaws of excellent quality. Well, the price of such equipment is not small.
• Makita, Dewalt,Fiolent–Companies producing high-quality products that can withstand increased loads.
• Interskol- A Russian company also produces good quality jigsaws at an affordable price, but with the relocation of factories to China, the quality has noticeably suffered.

Let's dwell on this number of manufacturers, since there are a lot of them, and I see no point in listing all of them. Most of these are cheap copies of well-known brands.

Well, this article comes to an end, I hope you learned something useful for yourself, and I helped you choose an electric jigsaw for your home. If you want to add something or disagree with something, write in the comments, I will be grateful to you for your opinion. Don't forget to subscribe for updates. I would like to add a video on choosing a jigsaw for the home. Perhaps that's all, thanks for your attention, good luck!