How to protect the corners of wallpaper. Decorative corners made of aluminum, wood or silicone for the corners of walls: how to decorate under or on wallpaper, what is best to glue and fasten on

June 13, 2017
Specialization: facade finishing, interior decoration, construction of cottages, garages. Experience of an amateur gardener and gardener. We also have experience in repairing cars and motorcycles. Hobbies: playing the guitar and many other things that I don’t have time for :)

How to finish the corners of the walls so that they turn out smooth, durable and beautiful? Previously, I was often interested in this question, but now, having gained experience, I myself will tell you how corners are finished - external corners inside and outside the building. I am sure that this information will help beginners cope with the task.

Finish options

The difficulty of finishing corners lies not only in the fact that they must be even. The fact is that these sections of the walls are often subject to shock loads, so it is necessary to provide them with sufficient strength.

Currently, there are several ways to solve this problem. The choice of method depends on the type of wall decoration, which can be as follows:

Option 1: plastered or plasterboard walls

If the walls are plastered or lined with plasterboard, then special plaster corners for finishing corners. They come in two types:

  • Aluminum perforated. Used for finishing flat areas;

  • Arched. Made of plastic. Their main feature is their increased flexibility, which allows them to be used for finishing curved surfaces;

The corners are glued with plaster or putty at the stage of rough finishing of the walls. During their installation, be sure to use a level. This allows you to install them strictly vertically or horizontally.

I must say that this decision used both for interior walls, and for facades. But, most importantly, this finishing of the outer corners of the house allows not only to level them, but also to protect them from mechanical damage.

Price:

Please note that all prices are current as of Spring 2017.

Option 2: finished with PVC clapboard

IN Lately PVC (polyvinyl chloride) lining, which is simply called plastic panels. Most often this material is used in the following rooms:

  • Bathrooms;
  • Kitchens;
  • Hallways.

If the walls are finished with plastic, the corners can be decorated in the following ways:

  • Using profiles. This is the simplest method, the essence of which is to use corner profiles. They are installed on the lathing using a level, just like plaster corners.

As a rule, profiles are fixed to the sheathing using a stapler. Then the panels are simply inserted into special grooves;

  • By bending the panels. To bend a plastic panel with your own hands, you need to cut its inner side along the fold line. It is even advisable to cut a thin strip, as shown in the photo diagram above.

Before bending, it is advisable to heat the front side, for example, using a hairdryer.

Price. The price of guides for PVC panels starts from 25-30 rubles per 3 m (standard length).

Option 3: finished with wooden paneling

Not so long ago, when finishing walls with clapboards, the boards for corner joints were cut and adjusted. At the same time, the remaining cracks were filled with putty. Nowadays, you can purchase a special wooden corner to decorate corners.

You can secure it to the lining using window nails. The only thing is that it is advisable to bite off the nail heads so that they are invisible.

It must be said that in this way you can finish not only external, but also internal corner joints.

Price. Price wooden corners on average is about 50 rubles per linear meter.

Option 4: facade finished with siding

Many beginners are interested in how to decorate the corners of the house on the facade? As I said above, for wet facades You can use perforated plaster corners.

If the facade is sheathed with siding or other facade panels, you should use special additional elements, which are usually sold complete with panels.

Such corners perform several functions at once:

  • Provide fixation of panels;
  • Design the joint of the panels;
  • Protect the ends of the panels from mechanical loads;
  • Serve as guides for siding.

In fact, installing siding corners is similar to installing guides for PVC lining. They are also mounted on the sheathing, but not with a stapler, but with self-tapping screws. In this case, a level must be used.

Option 5: wooden walls

At first glance, the design of the corners wooden house outside is not required, since they themselves look quite attractive and are quite durable. However, not everyone knows that the ends of lumber are the areas that are least resistant to moisture and rot.

To protect them, special sealants and impregnations are used for the corners of a wooden house.

Price. Below are the most popular formulations and their costs:

You can use compounds for the ends of lumber not only outside, but also inside wooden house inside.

Option 6: wallpapered or finished with liquid materials

Above I have already talked about rough method finishing of plastered walls. Finally, let's look at how it's done decorative finishing such walls.

So, there are two most common ways to solve this problem:

These products can be made to look like wood or even look like an expensive baguette. The latter are usually made of polyurethane. They look rich and are used in classic interiors;

It must be said that this method can be used not only for interior walls, but also for the facade.

The instructions for installing decorative corners require removing the finishing coating in the area where they adjoin the wall. This is especially true for heavy polyurethane linings.

Price. Below is the cost of some materials for decorating corners:

Conclusion

Now you know what methods and materials are used to decorate the corners of a house outside and inside. Additionally, watch the video in this article. If you have any questions on this topic, you can contact me in the comments.

June 13, 2017

If you want to express gratitude, add a clarification or objection, or ask the author something - add a comment or say thank you!

When building a house important role has finishing of external walls. It not only provides visual appeal, but also protects the house from the influence of bad weather and environment, thus significantly increasing the service life. In this article we will look at options for exterior finishing of walls and corners of the house, and also analyze the option decorative cladding outside corners of the building.

general information

Before you begin processing the external walls of the house, you will need to first install windows and doors, if the building has just been built. If you plan to decorate the outside of a wooden house, then it is necessary for it to shrink. Also keep in mind that wall cladding should be carried out after the wood has completely dried.

The work can be carried out almost at any time of the year, so no complications should arise with this. The choice of covering often depends on the material from which the building was constructed. Sometimes simple plastering or painting is enough, but in other cases it will be necessary additional insulation walls

Also keep in mind that some types of finishes can significantly increase the pressure on the foundation, so make sure the building's foundation is strong before using stone or brick.

Types of external wall cladding

Nowadays there are enough a large number of surface treatment methods. Most often the following are used for external walls:

  • wall cladding with natural stone;
  • brick covering;
  • artificial stone;
  • cladding using siding or lining;
  • applying plaster to the wall.

Let's take a closer look at each option.

A natural stone

The use of stone for external walls will give the house a strict appearance. This treatment of external walls demonstrates the success and prosperity of the owners of the house. The advantages of stone cladding include:

  • strength of the treated facade;
  • long service life of the coating;
  • attractive appearance.

Also keep in mind that due to its properties, the stone will do an excellent job of protecting the surface from external moisture. Stone can be used both for complete finishing and for partial finishing, for example, for the base or corners of a building. You can choose two types of building stone: processed or untreated. The latter option looks more attractive, but working with it is a little more difficult.

Quite often, granite is used for external walls; this option also has a decorative effect. Marble is also used, which has a wide variety of shades. The price is really quite high, so not everyone can afford this luxury.

Another disadvantage is the large weight of natural building materials. However, there is a stone called travertine, it weighs much less, but has good sound and heat insulation effects. The finishing method using travertine is significantly simplified, and the price is not so high.

Keep in mind that decorating external walls with stone is in any case a rather expensive and difficult task that will require special skills and knowledge from the worker. Therefore, we recommend paying careful attention to other cladding methods.

Fake diamond

Selection of artificial material - a good option for processing external walls. He won't even ask for any preliminary preparation. This stone has almost the same characteristics as the real material.

This finishing method allows you to give the building a pleasant appearance and only requires minimum costs. Keep in mind that the texture of such a stone can be either smooth or embossed, so the choice is yours. There is also a fairly large variation of shades, which will allow you to provide your home with unique design.

Siding

Siding has gained quite high popularity in our time due to good price and quality indicators. This covering is mounted with an overlap - this must be taken into account when finishing the wall. Mostly this material is made of vinyl, but there are options made of metal or even foam. This treatment of external walls and corners has the following advantages:


Installation of siding must be carried out on the frame of the house. Quite often, insulation is used during installation. The only drawback of this finishing option is the poor combination of siding with other decor options. Please note that installation must be done extremely carefully to prevent damage to the material.

Clapboard finishing

The lining is made from natural environmental components, so it will not cause any harm to humans. It is made in the form of processed wooden board. The lining will provide the house with an attractive appearance, in addition, it will visually align the outer wall and provide good sound insulation.

However, such finishing for external walls and corners has almost all the disadvantages of wood, so additional treatment with special solutions will be required. Lining is most often made from the following types of wood: oak, pine, spruce, birch, walnut and linden.

Using bricks

Brick will provide good protection external walls and corners of the house from environmental influences. This processing method can be considered one of the most durable options. In addition, brick will provide an elegant appearance and will not require special care. The installation method is also quite simple.

Thanks to the ability to vary the dimensions and shape of the brick, you can create unusual design. Using fired bricks will also achieve impressive results. The main disadvantages of this finish can be considered the heavy weight and high price of the material.

Plaster cladding

Plaster is mainly used when it is necessary to create decorative effect outer wall and provide fire protection. Decorative solutions are different types, silicate mixtures are especially popular.

Acrylic solutions are also often used, which have improved characteristics. Decorative plaster for external walls and corners is available in many options, so the choice will not be easy.

This finishing will protect the building from moisture and fire. Significant disadvantages include the short service life, which will not exceed ten years, as well as the need for additional leveling of the wall, especially the corners, which will require time and effort.

Combined finishing

There are two ways to combine:


The latter method of combination began to be used much more often. These methods will provide interesting interior building and endow it with the properties of each type of cladding.

Finishing the external corners of the house

Corner treatments are often made from the same materials as the wall. Also, when you want to create a decorative effect. For finishing corners the following is used: brick, stone, plaster, polystyrene foam, tile and other materials. Remember that working with corners is quite hard work and sometimes it can be difficult to do without the help of professionals.

Recently, special foam panels have been used to decorate the outer corners of the building, which create an unusual decorative effect. The same treatment is also suitable for wooden houses. With this cladding, the building acquires the effect of antiquity and becomes like a castle. We recommend viewing next video to see the processing of corners using polystyrene foam in practice:

Summing up

As you can see, exterior decoration the walls of the house are extremely important occupation, which provides a decorative effect and allows for additional protection. There are quite a lot of options, and choosing one of them will be quite difficult. Each of them has its own advantages and disadvantages, which were discussed in detail in the article. If desired, you can choose a combination option, however, it must be taken into account that finishing will be quite difficult, since special skills and knowledge will be required. The choice of method for cladding external walls will depend only on you and your personal tastes and preferences. We recommend watching a special video to learn even more about the methods of finishing the exterior walls of a house and their corners.

Finishing corners in an apartment is perhaps the most important and difficult stage of work. Making a flat plane is much easier.
In this article we will tell you how to finish corners in an apartment and offer several of the most popular options for doing this work. You can see everything for yourself in the video and it will be given complete instructions to do this job.

A completely right angle, this is the pinnacle of mastery in wall decoration.
But first, it’s worth figuring out in what cases you shouldn’t strive for this:

  • The geometric shape of the premises is very often not correct, therefore, due to the misalignment of the corners, distortion occurs. Here it may not be worth making a perfectly even angle.
    You must first determine the level of distortion. This is done by measuring the diagonals, it is done using a regular nylon thread and after measuring you will already have an idea of ​​the level of distortion;
  • If there is a large skew, you will need to take a lot usable area premises. Do you need it?
    It might be easier to make a niche or decorative insert and smooth the surface. This will be useful if you place a cabinet in the corner.
    Then the error will not be visible;

Attention: If you do not plan to place objects that have a right angle in the corner, then the skew will not be noticeable.

Corner Alignment Options

Sometimes, of course, you just need to make the angle correct geometric shape. Then materials come to the rescue, which must be properly secured and before that, the unevenness of the corner must be determined.
Let's look at ways to finish corners that will help solve this issue.

Surface preparation

This stage of work must be performed for all types of corner alignment. It will determine the quality of surface bonding, prevent fungus from occurring, and ultimately significantly affect the durability of the finish.
Moreover, it does not depend on whether it will be done by finishing the corners from pvc panels or finishing external corners with plasterboard:

  • We remove all the previous covering, this is wallpaper or whitewash, for this we use a metal brush;
  • We inspect the surface. If there is any peeling of the old plaster, then this should be removed. To do this, use a hammer and chisel;
  • Now we treat the surface using antiseptics. If there is no fungus, this still needs to be done, at least for preventive purposes.
    It's not a big cost, but you can avoid it big problems subsequently;
  • After the surface has completely dried, apply a layer of primer. It is better to give preference to deep penetration material.

The surface is prepared, now let's move on to options for performing the work.

Alignment using a corner

Finishing corners in an apartment with corners is done all the time. It is available in plastic or metal.
You can use the one you like best.
The technology for attaching it is as follows:

  • We measure angle deviations with a regular construction angle. This way we will determine the level that we need to apply to the surface.
    We choose the usual dry mixture as the finishing material;

Corners play a bigger role in the interior than it might seem at first glance. It is enough to look at their uneven or “erased” surfaces to immediately become clear: no one would call such a finish neat. Decorative corners for wall corners, door slopes and window openings began to be used everywhere during repairs only in last years. Until then, the materials used to cover the joints simply changed more often than the rest of the finish.

You can appreciate the transformative effect of a decorative element even in an empty room without furniture. Based on the type of location, they are classified into two types:

Elements are also classified into those that overlap external sides corners and those that are inserted into the internal ones. The latter can have semicircular shapes that “soften” the finish. You can make a corner with your own hands, or purchase it at a specialized store. Products are made mainly from plastic, MDF, but there are also more durable metal and stone options. Polyurethane effectively imitates various natural materials: wood, marble, sandstone, brick. Plastic corners are used not only as decoration, but also as a durable finishing element that will “outlast” wallpaper or anything less durable coating wall surfaces. There is also a “mystical” component to the question. According to Feng Shui, the places where the “joints” of the walls are considered energy breaks, which create an imbalance and negatively affect the perception of the situation, so their edges are decorated with corners, “smoothing out” the sharpness.

What are decorative corners for?

Corners are most often “touched” by people passing by with their shoulders, elbows and carried objects. Accordingly, it is this part of the wall that is erased and scratched more than the remaining ones. To protect the joint from mechanical stress, a decorative corner is attached to it - a special type of finishing materials, a special “overlay”. It is designed to perform two functions:

  • Decorate the finish;
  • Protect the sensitive area.

In addition, finishing using these elements looks neater and the interior seems complete. Using the material, color and size, you can emphasize the features of the style used in the design of the room.

When to apply

The corner part of the wall is covered with decorative elements in several cases:

  • If the corner has visually noticeable defects: curvature, “dimples” or protrusions that were not corrected with plaster;
  • When the protruding part obstructs the passage or is located next to the “pedestrian” area. Accordingly, it will constantly be touched, erased, scratched. Over time, mechanical damage will become noticeable and negatively affect the sensitive wall finish and its appearance;
  • If without them the interior does not look complete;
  • To prevent the destruction of the outer corner of the building and give the exterior a neat appearance.

The installation of elements usually completes the renovation: they literally become the finishing touch in the design.

Plastic corner size

The standard range of sizes for PVC corners starts with 10x10 mm and ends with 50x50 mm. Between them, gradations with a difference of 5 mm are used. Parts of non-traditional sizes are made to order. An angle of 90 degrees is maintained between the two guides of the decorative element, at which all planes of the apartment must intersect. If you have a home with “crooked” walls, then you need to take appropriate measurements and contact a specialist with a request to make individual parts.

Types of decorative corners on walls

Corners are universal finishing elements. They are pasted in bathrooms, kitchens, bedrooms, balconies, offices and living rooms. Decoration is carried out using several types of elements:

  • Arched, for plasterboard partitions;
  • For ceramic tiles. The same category includes profile strips for the bathroom;
  • Corners made of natural and artificial stone;
  • Options made of wood;
  • Special guides for siding (exterior decoration);
  • Corners for ceiling and floor “joints”;
  • Textured options;
  • For external and internal corners;
  • Corners for door and window openings.

Each type is combined with a specific wall decoration and organically blends into specific styles. Corners are used to decorate not only walls, but also fireplaces, stoves, furniture, and “boxes” for masking communications and pipes.

Arched

Arched corners are used under plaster or glued on top of an already finished surface. “Internal” elements provide smooth straight lines. Corners for semicircular partitions are characterized by increased flexibility, which allows them to be tightly bent to curved surfaces of the base. If the decorative wall has a strict rectangular or square shape, That decorative elements can be selected from standard plastic options, designed for simple walls.

For ceramic tiles

Ceramic tiles are used to finish walls and floors in kitchens and bathrooms. At the corners, the tile seams are tightly sealed, they do not allow water to pass through, but they collect dust, dirt and grease (in the food preparation area). Also, these places are usually used by bacteria and fungi to organize their “breeding ground”. Microorganisms will not get under properly treated seams, but they can easily make a comfortable “home” on their surface. When cleaning tiles Special attention It is recommended to focus specifically on these areas. Overlaying the corners allows you to reduce the scope of work and make the place where the walls meet reliably protected from the adhesion of dirt particles. In addition, the decorative element will competently disguise uneven tile cuts, and options that contrast with the color of the tile will add chic to the room. Corners are divided into two types:

  • Internal. They are used to decorate joints between walls and ceilings, floors, showers, that is, “pressed-in” corners. Usually have a convex or concave shape (fillet);
  • External. Used when processing protrusions.

Popular plastic is not used for decorating tiles, since the main coating can compete with polyurethane in durability and strength. We need all the finishing elements to “age” approximately equally, otherwise, due to a corner that has become unusable, the tile will have to be “disturbed” once again. Metal and ceramics are used to decorate tiled surfaces.

There are so-called “ribbon” corners. They are made of flexible plastic, produced in “reels”, are highly flexible, and can be easily replaced if necessary. This option is ideal for quick repairs.

For external and internal corners

Separately, elements are classified into external and internal. The former are used to decorate protruding joints of surfaces. The latter are used less frequently in “concave” corners. The latter are not in such dire need of protection, so overlays are only needed to decorate the finish. Inner corners usually have a semicircular concave or convex shape.

Textured corners

Textured options differ in color and pattern. They are usually made of plastic. Often the corners imitate a specific material: bricks, marble or granite surfaces, porous stone, wood (wenge, cork, oak, cherry). A variety of shades allows you to choose a contrasting or background option for a specific interior.

Wooden

Wooden corners are usually made from thin MDF plates, bamboo, cork or veneer. The materials are as light as plastic. MDF is flexible, and a decorative layer with protective film from damage. In veneer versions, the element is made from thin wood slices, that is, it is more natural and has a natural pattern. Solid wood corners are denser. Glued to the surface, they will protrude slightly on it.

Not recommended for use natural wood in bathrooms and kitchens. Before attaching the material, it should be coated with a layer of varnish. Wooden elements Most often they are made independently. Unfortunately, a dry corner can become deformed, and strong blow give a crack. You will have to “pay” for the natural beauty of the decorated surface with a lower service life.

Corners for ceilings and baseboards

Ceiling and floor skirting boards at the junctions of individual modules they have a very unsightly appearance. No matter how carefully the cuts are processed, they will slightly undermine the aesthetic picture of the interior. Decorative corners are used to disguise them. By appearance they are different from wall options: They look like small overlays that are designed to decorate a small area. For ceiling skirting boards with stucco in classic styles acquire special corners with monograms, repeating each bend of the connected straight lines. The use of elements on ceilings is not mandatory, which cannot be said about floors. Here, the baseboards are constantly in contact with the feet of guests and household members. Their “joints” can become loose, frayed and become completely unusable. The corners will save the baseboards from rapid wear.

In design compositions, the lower decorative elements sometimes echo the upper ones. This solution ensures the integrity of the composition, so ceiling and floor plinths often have the same outlines, and accordingly, identical corners are selected for their decoration.

Natural stone corners

Decorative elements made of natural stone are usually used to decorate the facades of houses. Due to the strength of the material, they serve as excellent protection against building destruction. However, with the popularization of the industrial loft, brick and masonry became an organic addition not only to the exterior, but also to the interior of the house. Such corners will definitely “protrude” slightly above the surface. You should choose flat stones that will ensure a neat appearance of the entire structure. Hold them together cement mortar, that is, the corner will be monumental and installed for ten years. Elements are combined with plasterboard walls, relief plaster and wooden lining.

Artificial stone corners

Corners made of artificial stone are considered cheaper and more practical options. As a rule, imitation is made of plastic. It repeats not only the color, but also the “rough” texture of the surface. PVC is flexible, often goes beyond the “borders” of the corner and creeps onto the wall itself. This solution is used to create the illusion of naturalness of the decoration, because real stonework usually does not fit the line. Combine the corner with wallpaper and the same plastic panels.
It is important to know. The most budget-friendly imitation of stone on the corners is considered thick wallpaper. Curly pieces are cut out of them along the contours of the pebbles and glued to the joint. Similar element will not protect the surface from scratches and damage, but will cope with the decorative task.

Options for using corner profiles for finishing corners

The corner profile is used to decorate the following elements:

  • “Natural” joints between walls that are in a vertical plane;
  • Door and window slopes;
  • Places of “convergence” of ceilings, floors and walls in horizontal planes with a concave shape;
  • Angles decorative partitions, including arched openings;
  • Joints between shower cabins, fireplaces and other “monumental” (not involving movement) interior objects and walls and floors.

A decorative element can be used to “smooth out” any “seam” at the junction of finishing materials. If previously it was necessary to carefully process the cuts so that they retained a beautiful aesthetic appearance, now they are allowed to have irregularities and chips, which will be masked by the corner.

Finishing door and window slopes

Double-glazed windows usually come with special corners that complete the installation of the window. Door sets also often include trims and trims. If the corners are left without additional protection, then you will have to select and glue it yourself. The element will protect the slopes from damage and smooth out the junction of two different materials. For example, the end of the wallpaper will begin to wear off and peel off over time. No matter how smoothly you cut the finishing material on the slope, it will look untidy without additional coating. IN doorways slopes can be scratched by furniture carried through them.

The best option would be to use polyvinyl chloride corners. If necessary, it is easy to replace, and the surface texture can imitate any natural materials. By choosing a special shade, you can create an illusory transitional border between the color of the wallpaper and window frame or a doorway. Corners made of veneer or bamboo are less commonly used.

Arched doorways

Arched openings, as a rule, have one of the classic shapes: with a semicircle on top. Not every material can replicate its contours. For example, solid wood corners can only be used to decorate straight lines. Smooth transitions are decorated with elements made of flexible plastic, MDF, veneer or bamboo. All of the above options will easily follow the contours of the arch and complete the design of the doorway.

How to glue a plastic corner yourself

In addition to decorative corners, you will also need a fastening compound. For narrow elements it is not recommended to use glue, the excess of which cannot be removed from the surface without leaving a trace. Before carrying out the procedure, the joint must first be cleaned of dirt and residues of wallpaper or protruding pieces. finishing material. No corners will save an excessively uneven and bumpy surface. Then the wall is measured. The measurements are exactly transferred to a piece of corner. Cut material better with a hacksaw with fine teeth. Do not forget about the joints between the corners themselves (in doorways, windows): two straight lines should end with cuts at an angle of 45 degrees. The “wrong” side of the prepared material is coated with glue and applied to the wall. Using your hands, firmly press the corner to the surface and hold it until the fastening composition “seizes”

Conclusion

There is another type of decorative corners that decorate furniture (sofas, cabinets, beds, cabinets). Typically used to protect MDF joints or Chipboard boards, which are especially sensitive to damage and begin to crumble over time. Special silicone corners save the little fingers of household members from constant impacts on these surfaces. In interior design, the use of these elements usually completes renovations. Their installation is akin to finishing touches brushes on an almost finished canvas, when the artist, moving away from the easel, evaluates his creation with a critical eye and corrects individual areas to make the composition complete. Decorative corners have become an essential element in the design of a room, which emphasizes its neatness and beauty.