Floor standing gas boiler BAXI - the warmth of your home. Boiler BAXI Slim - modern, elegant, efficient Gas-fired floor heating boilers baxi slim

Floor gas boilers Baxi SLIM i, iN, Fi, FiN, HP

What is the difference between models of boilers with designations i, Fi, iN, FiN?

First digit:
1 - single-circuit boiler for heating only
2 - double-circuit boiler for heating and hot water supply (hot water supply)
Further:
Letter F- closed combustion chamber with forced removal of combustion products.
No F- open combustion chamber with natural removal of combustion products.
iN, FiN- a boiler without a built-in expansion tank, circulation pump, safety valve and pressure gauge (there is a letter N). This allows the buyer to independently select and buy the necessary equipment for a specific heating system.
i, Fi- the boiler is equipped with a built-in expansion tank, circulation pump, safety valve and pressure gauge (no letter N).
For example:
SLIM 1.230FiN- single-circuit boiler for heating, with a closed combustion chamber, without additional hydraulic accessories.

Features of floor gas boilers Baxi SLIM:

SLIM 1. …i (N)- floor single-loop open combustion chamber. Wide model range. Power range from 15 to 62 kW. Electronic flame modulation and built-in self-diagnosis system. Modern design and minimal overall dimensions (only 35 cm wide) make it easy to place the boiler anywhere. SLIM 1. …Fi(N)- floor single-loop gas boilers with cast iron heat exchanger and closed combustion chamber. Equipped with a coaxial chimney. Electronic flame modulation and built-in self-diagnostic system provide improved ease of operation and maintenance. Modern design and minimal overall dimensions (only 35 cm wide) make it easy to place the boiler anywhere. Convenient when placing the boiler in a residential area, for example, in the kitchen, if it is not possible to organize a standard chimney. SLIM 2. …i(Fi)- floor double-circuit gas boilers with cast iron heat exchanger and built-in boiler. Thanks to the built-in boiler, the boiler is a ready-made mini-boiler room that does not require additional accessories for organizing hot water supply. Electronic flame modulation and built-in self-diagnosis system provide improved ease of operation and maintenance SLIM HP- floor gas boilers with a cast-iron heat exchanger. A series of highly efficient gas boilers with a two-stage atmospheric burner. Sectional heat exchanger made of highly ductile eutectic iron with shaped fins has a large heat exchange surface and excellent aerodynamic properties. Thanks to the fiberglass insulation placed under the casing, heat loss is minimal.

Advantages of Baxi SLIM floor standing gas boilers:

• Boilers with modern design and compact dimensions. The width of single-circuit models is only 35 cm.
• Built-in electronic self-diagnosis system that allows you to automatically detect up to 10 types of possible malfunctions in the operation of the heating system, which makes it easy and convenient to operate and maintain the boiler.
• The presence of a built-in weather-dependent automation of the boiler with the ability to connect an outdoor temperature sensor allows you to automatically change the temperature of the heating system depending on the temperature outside, which ensures a high level of comfort and gives real gas savings. To create a comfortable indoor climate, a mechanical or programmable room thermostat can also be connected to the SLIM boiler.
• Availability of models with a closed combustion chamber. These types of boilers are extremely convenient when it is not possible to organize a standard chimney, as well as when placing the boiler in a residential area, for example, in a kitchen.
• Due to the continuous modulation of the burner flame, rather than its stepwise regulation, the boiler power is smoothly adjusted, which ensures its long-term operation and saves gas consumption.
• The boilers are adapted to Russian operating conditions and are resistant to gas pressure drops, work steadily at its reduced pressure, producing at least 50% of the heat output at an inlet gas pressure of 5 mbar.
• Automatic frost protection, which is activated when the water temperature drops to 5°C. Included with the SLIM boiler model with a capacity of 62 kW. a minimum gas pressure switch is included, which puts the boiler in standby mode and automatically turns it on when the gas supply is resumed. The minimum pressure switch is very useful in winter in case of possible interruptions in gas supply and can also be used for other models of boilers in this series.
• The presence of two temperature control ranges (30 - 85 ° C and 30 - 45 ° C) allows the use of boilers when operating in the "warm floor" mode only.
• The heat exchanger sections are made of high quality cast iron.
• Double-circuit boilers have a protection system against the appearance of legionella bacteria in the system, which once a week heats the water in the boiler to a temperature above 60 ° C, preventing their occurrence and ensuring the safety of the consumer's water supply.

Single-circuit boilers can be connected to boilers of the Slim UB series with a capacity of 80 or 120 liters with a tank made of enamelled or stainless steel. The boiler is made in the same design as the boiler and the temperature in it is controlled either from the boiler panel or from the boiler panel.

Design features of gas floor standing boilers of the SLIM 1. ...i(N), SLIM 1. ...Fi(N), SLIM 2. ...i(Fi) series

Design features of gas floor standing boilers of the SLIM HP series

Technical characteristics of floor gas boilers Baxi SLIM HP

The specialists of the company "Termogorod" Moscow will help you choose the right one, buy and mount the Baxi floor boiler, find an affordable solution. Ask any questions you are interested in, telephone consultation is absolutely free, or use the form "Feedback"}