DIY bag hanging chair. Swing for relaxation and work - do-it-yourself cocoon hanging chair made from hoop and rope

A dacha is a place not only for intensive work, but also for have a nice rest, so it's hard to imagine garden territory no hammock or swing. In gardening stores today you can find designs for children and adults of various shapes and sizes. If you don't want to spend money, try making your own garden furniture. In this article we will tell you how to make a comfortable hanging chair with your own hands and decorate personal plot country house or dachas.

Materials:

- metal hoops;
— slings;
- cord;
- centimeter;
- wooden rods.

Master class on making a hanging chair for a summer house

Master class hanging chair for a summer house

If you haven't found the hoops different sizes, you can make them yourself from PVC pipes with a cross-section of 3.5 cm. Decide on the size of the chair and calculate the length of the pipe using the formula:

L=3.14*d, where L – length PVC pipes, and d is the diameter of the ring.

For example, if you need to make a hoop with a diameter of 100 cm, you need to measure 100 * 3.14 = 314 cm of pipe. To connect the ends of the pipe, you can use inserts made of wood or plastic.

It is better to braid hoops with polyamide rope 0.4 cm thick, as it is more durable and at the same time soft to the touch. It’s better to buy a lot of cord in advance so that there is enough for the entire product, at the rate of 400 cm of cord per 100 cm of hoop. The winding should be uniform, and to increase its strength, tighten it every 10-20 twists.

Now you can start weaving the mesh using the macrame technique. You can choose any pattern, for example, chess with flat knots or any other. Monitor the tension of the rope during weaving, as the beauty of the product, as well as the strength of the finished cross, depends on this. You can turn the remaining ends into a fringe that will hang beautifully.

After the hoops are braided, they can be assembled into finished design. Start by braiding them together at one end with a cord. To make the back, wooden rods are inserted. It is best to make cuts at the ends of the rods so that they do not slip off.

You can also braid the back with any pattern, but it is better to start weaving from the top and go down. When the chair is ready, you need to attach the slings and hang the product in comfortable spot.

Watch this useful video: Weaving with ropes for a chair

Master class garden chair with fabric cover

If you are not familiar with the macrame technique and do not want to weave, you can make a chair with a fabric cover. To make it you will need a hoop with a diameter of 0.9 m, 3.0 meters of durable fabric, metal rings and buckles, braid and slings.

From a piece of fabric you need to cut two squares measuring 150*150 cm. In order to make a circle, the squares need to be folded four times, measure 0.65 m and cut. At a distance of 40 mm, measure the outline with strokes.

Now you need to mark the cutouts for the slings, so the circle is folded four times and marks are made relative to the bend lines. The first two slings will be located at an angle of 45 degrees, and the second - 30. The slots should be 10*15 in size.

To make them on the second circle, connect the parts and make a mark. Two circles need to be sewn on a machine along the marked line so that there is a hole left for the hoop. Cut strips 6-8 cm wide from padding polyester and cover the hoop.

The case needs to be filled with padding polyester and secured to the hoop. All that remains is to attach the slings and secure them into one suspension on a metal ring.

Ideas for hanging furniture in the garden

Hanging seats have been popular for a long time. Most often they are made from rattan, as they are different high strength and lightness.

Semicircular structures are very convenient for relaxation, and you can hang them on a tree or other support. The shape of hanging furniture can be completely different, so each owner of a country house chooses the most suitable options for himself.

On the market garden furniture can be found hanging furniture made of plastic, wicker, acrylic or rattan, each with its own advantages and disadvantages.

To make the seat soft, the set includes decorative pillows or mattresses. There are many options for designing a sitting area, so you can either make garden furniture yourself or buy ready-made products.

A hanging chair can be hung not only on a tree branch, but also in a gazebo. To do this you will have to build suspended structure, which will support not only the furniture itself, but also the weight of a person.

Watch the video: Hanging chairs - romance in the home

The advantage of a hand-made chair is that it will fully meet your needs and harmonize with the overall landscape design.

Now you can free time It's nice to sway and get satisfaction from relaxing in nature.

During the warm season, almost every city dweller dreams of getting out into nature and spending at least a few days, or even months, there. Rest on fresh air is necessary for every person, and for this it is very important to have a comfortable hammock or chair. A hanging chair that can immerse a vacationer in childhood is considered very popular. After all, all children love to swing on swings. But since the cost of this piece of furniture is quite high, skilled craftsmen learned how to make it ourselves.

The right approach will help you create a product no worse than those sold in stores.

Varieties

The first hanging chair appeared in Denmark in the mid-twentieth century. This designer furniture is most often used to furnish garden plot and less often for apartments in megacities. Unusual design in combination with a variety of materials makes this piece of furniture in demand among many buyers.

A hanging chair is a comfortable seating area that is usually made from natural or man-made materials such as wicker or rattan. The product itself is either suspended from the ceiling or installed on a special stand so that you can swing in the lounger. It is also called a rocking chair or swing chair, because their main purpose is to rock a person.

The interesting thing is that such a product can withstand very heavy weight. Therefore, a mother with a child or two teenagers can easily relax in it. The main thing is that the size of the furniture allows it to accommodate more than one person.

Hanging chairs can be divided into wicker, fabric, hard and soft, and they differ in shape and material. These products are designed to swing in different sides. There is only one type of hanging chair that does not move diagonally or back and forth. It is attached to the floor and ceiling, and therefore can only rotate in a circle.

The frame of the product can be made of various materials. Hard ones are made of rattan, wicker, metal, acrylic or transparent plastic. And to soften the product, it is covered with a soft blanket or a synthetic padding mattress is placed inside. Sometimes the base is covered with thick fabric, and small pillows are placed on top.

The hammock chair has a soft frame, as it is made of a fabric base, which is suspended from the ceiling.

Also, the hanging chair can be divided according to purpose. For example, a garden product is intended to be installed outdoors, and therefore its material must be moisture-resistant. And here baby product must have small size and a soft seat.

Types of construction

There are many models of hanging chairs, and each of them can complement a garden plot or apartment. Making furniture with your own hands has a number of advantages over purchased goods, because they allow you to show your imagination and make sure of its quality.

The complexity of the work depends on the design of the product, and therefore it is worth familiarizing yourself with all types in order to make a choice.

Hanging swing

These unusual chairs can be made from different materials. The design itself is lightweight and reliable, and most importantly, it can have both a soft and hard base. A swing can be used to decorate a cottage, sleeping area, children's room, attic or playground. You can make it yourself using strong ropes and thick textiles.

Wicker cocoon

The cocoon chair, or egg, is one of the most popular models. It differs from other products in the presence of walls that hide almost the entire internal space. It is usually made from natural or artificial rattan, and sometimes wicker is used. This design will appeal not only to adults, but also to children. After all, in such a cocoon you can find solitude.

Nest chair made of hoop

This model is interesting because to make it you only need an iron hoop, which needs to be braided with strong yarn. The structure itself must be suspended from the ceiling with strong ropes. The nest can fit in any room, even a small room.

The variety of models also provides a method for attaching the base. A hanging chair can be attached to the ceiling, or it can stand on a stand. The choice of fastening depends on the characteristics of the room and the personal preferences of the owner.

The material for its manufacture also depends on the type of product chosen.

So, to build a swing you need to prepare thick fabric, strong ropes and wooden blocks. And if the product involves weaving, then willow, bird cherry and rattan twigs are suitable. They should be flexible enough to be woven by hand.

To make a nest chair, you will need an iron or plastic hoop that has sufficient rigidity. And to give a unique style, it is important to use wear-resistant fabric, foam filling, laces for weaving and wooden boards.

Much depends on the weaving technique. One of the most famous is the macrame style, which involves intertwining knots of rope or ropes. With its help, you can achieve a sophisticated look for the product.

To ensure the reliability of the base, the patchwork technique is used. For this patchwork bedspread attached on top of the base material.

The base of the product can be knitted with strong yarn or laces. Weaving from multi-colored laces will look especially beautiful.

An openwork pattern can be created using the tatting technique. Such a product will seem weightless and light, which will undoubtedly attract the attention of guests.

When choosing a material for weaving or creating a base, you need to take into account its characteristics. After all, not every material is strong enough to support the weight of an adult. It is also important to select strong fastening elements so that the structure can withstand the weight of the person sitting and not break.

How to do it yourself?

There are many drawings and step by step instructions For self-made this type of furniture. But the simplest is the swing chair, which will appeal to both adults and children.

To make it you will need two meters of thick textile, a thick meter-long wooden stick, a drill, carabiners, a strong cord, reliable threads and paint.

Performance:

First you need to take the fabric, fold it in half, measure 18 cm from top corner and draw a diagonal to the lower right corner. You will end up with an uneven triangle that needs to be cut out and removed. The main part of the fabric needs to be unfolded and the sides of the cut are sewn, while picking up their edges by a centimeter.
Next you need to create pockets for the laces. The edges of the long piece need to be folded 3 cm and stitched on a sewing machine.

On wooden block you need to make four holes, two on both edges. The distance between two holes should be 4.5 cm, and the distance between the central holes should not be less than 75 cm. The laces must be inserted into them and secured with strong knots. You also need to make a knot in the center of the rope so that a loop is formed on top, which will then be hung on a hook.

The hanging pieces of cord must be passed through the fabric and pass through the holes in the stick that are located along its edges. Then you need to make knots for secure fixation.
You need to attach two connected carabiners to the ceiling hook, you need to thread the cord into the lower carabiner. This way the structure will gain sufficient strength for safe rocking in the chair.

You can decorate the resulting product decorative pillows with a bright print. It is ideal for the street if you place it on the veranda or under a large tree.

Another one interesting model for self-production - a drop. To do this, they purchase about 500 rattan rods, a steel hoop, several metal pipes or strong ropes that will be woven together in the shape of a circle. Then you will need PVA glue, strong rope, cord and chain.

Stages of work:

Before starting work, you need to calculate the size of the drop. Then you need to peel the rattan rods from the bark and cut them into equal pieces. To give good flexibility when weaving, the rods need to be steamed and beaten.
The furniture frame can be made from polypropylene pipes, metal or a slightly compressed hoop to obtain a semicircular shape of the product. If a pipe is used for the frame, then its ends must be fastened with special fasteners. In the future, you will need to attach rods to it, the length of which should be 30-40 cm higher than the product.

The rods are attached to the base so that the distance between them increases evenly, until approximately the middle of the product, and then so that this distance decreases. To give the chair its shape, the rods must be bent during the weaving process.
To secure the rattan, its rods need to be bent through the hoop several times and secured their ends with strong ropes. Next, the structure needs to be intertwined with thin rods, starting from the bottom and ending at the top. To give the product additional strength, all fastening points must be lubricated with glue.

You can lay a thin blanket or put a large flattened pillow in the finished chair.

Necessary materials

Depending on the selected type of product, you may need various materials. First of all, you need to prepare those that will make up the structure of the hanging chair. These can be pipes, hoops, rods, ropes or bars. If you are making a swing chair, then you only need durable and wear-resistant fabric.

It is important to decide what the filling for the bag that will be in the chair will be. After all, being in it should be as comfortable and safe as possible, so it is better to purchase padding polyester or foam rubber. But a foam pillow will not be able to transfer moisture, and therefore it is better to use this option in the house.

(20 ratings, average: 4,30 out of 5)

Work days modern man keep him in suspense. Weekends allow you to relieve fatigue, during which you need to restore strength and completely escape from the hardships of everyday life. Many city residents go to their dachas outside the city for the weekend. This allows you to be in nature and completely relax from the bustle of the city.

Those who stay in the city for the weekend can be offered a lot of devices for relaxation and rest, one of which is a hanging chair that resembles swing. Ready model You can buy it in the store to save a little family budget, you can do it yourself. The device is used not only in the apartment, but also in nature, in country house or at the dacha.

Hanging chair

Such a device became known from a designer from Denmark in the middle of the last century. As before, this item belongs to the category of designer furniture. It is used in a country house or apartment. Modern materials are used for its production, it is made unusual shape, and an ergonomic design is created.

A hanging chair is a comfortable and convenient bed made of modern materials or wicker or rattan. They fasten it to the ceiling using a hook. Thanks to this fastening, you can ride in the chair as if you were a child on a swing. An example would be Ikea hanging chairs.

This piece of furniture is essential for those who love to swing. Having settled down comfortably on the pillows, taking a book in your hands, you can sway a little and immerse yourself in a world of tranquility.

Types of chairs

Depending on the material used, products are divided into the following types:

Armchair with rigid frame. It can be made from rattan, wicker or modern materials: plastic or acrylic. For comfort, you can put a pillow or soft mattress on the seat.
. The design is similar to a hammock, but differs in size and fastening. This option is softer. If you swing on soft pillows such a hammock chair, you can perfectly relax and unwind. It is not difficult to make such a chair with your own hands.
hanging. This model differs from the others in that it is ¾ closed. This makes it possible to completely disconnect from the outside world and bustle and fully relax. The walls of this invention are made wicker in the macrame style.
Drop chair. The model resembles a hanging house or a nest chair in which a child will be comfortable.
Chair on the counter. This method of fastening differs from all others in that the structure does not need to be attached to the ceiling. It can be installed in any corner of the house, apartment or yard.

For the manufacture of hanging chairs, modern synthetic materials who do lightweight design, flexible and silent.

Advantages and disadvantages

TO merits include the following indicators:

comfort;
originality;
exclusivity.

If you buy a chair, then first of all it should be comfortable. His appearance must match the interior of the room in which it will be located. But an exclusive model can only be made with your own hands. Then you will be sure that no one else has such a product.

Such a wonderful swing has flaws:

the fastening system must be reliable and thought out in advance;
It is not possible to install a hanging wicker chair in a room with suspended or suspended ceilings.

Gallery: DIY hanging chair (25 photos)

Hanging or on a stand

Considering in detail the types of hanging chairs, you need Special attention pay attention to the structure on a metal stand, which is installed on the floor. This model is considered more functional due to its mobility. The chair can be moved and installed in any place convenient for you.

In this model, you can easily detach the frame from the rack and hang it from the ceiling using a pre-prepared mount. Get a hanging hammock chair.

Placement in the interior

For any interior, you can choose a hanging chair. If we consider classic style, then you need to choose a good rattan model for it, Mediterranean style will complement the white cobweb chair, in rustic style it will look good hanging hammock, and for modern interior a cocoon will do, round form or a plastic egg. IN modern style A chair made of metal rods will fit perfectly into high-tech.

hang ball chair(another name for “bubble”, which means “bubble”) can be done in a room or in a recreation area. The model should be made in the same color and from the same material as the other furniture in this room.

If you want to focus on a hanging swing, then you need to choose extraordinary model(for example, with backlight). You need to place it in the middle of the room. It is desirable that the material from which the chair is made is unusual. If you live in an apartment with your significant other, then the second swing can be placed near the bed or in the recreation area.

A ball-shaped chair can be decorated with a pattern to suit your taste. In addition, you can choose the color of the backlight and change it depending on your mood. Perfectly relieves stress green or light green color, the color red can energize and lift your spirits.

Armchair for cottage and garden

Outdoor chairs can be combined into separate species. If for a residential premises it can be made from almost any material, then for placement on the street its material must have the following properties:

resistance to temperature changes;
density and reliability;
resistance to natural disasters.

If we consider natural material to make a chair, you need to pay special attention to artificial rattan . Unlike natural material, it better withstands the influence of weather conditions, and therefore will last much longer than natural ones. For the winter, furniture should be removed from the street. To store it, you can use any unheated room or utility room with normal humidity.

Making a chair yourself

Option 1

The chair consists of several rings woven together using macrame. To make such a device yourself, you need to purchase:

The diameter of the recommended rings may be smaller - indicated maximum dimensions for such a chair. As for the thread, it should not be purchased in parts, but at once the entire required length in order to avoid differences in color or quality. If all materials have been purchased, then you can start working.

Progress:

Option 2

If you are not familiar with the technique of weaving macrame, you can make a hammock chair from textiles.

To work, you will need a gymnastic hoop with a diameter of 90-93 cm. You will need dense fabric of a color that not only appeals to you, but will also add a certain zest to the interior of the room. In addition to the hoop for making textile product required:

3 meters of durable and thick fabric any color, it can be thick cotton or thick denim;
synthetic padding as a filler for a fabric cover;
a zipper, the length of which will be equal to the diameter of the hoop;
4 buckles and ring fasteners for hanging;
3 meters of non-woven fabric or braid;
9 meters of belt tape.

Instead of a ready-made gymnastics hoop, you can use a bent metal-plastic pipe.

You need to make two circles with a diameter of 1.5 m from fabric. To do this you need:

divide the fabric in half;
Fold each resulting piece into quarters;
mark a radius of 75 cm from the center and cut off the excess fabric.

On the resulting fabric circles you need to make markings and cut out holes for the slings. You need to work with two circles at the same time to make it symmetrical.

In one circle in the middle you need to insert a zipper, the length of which will correspond to the diameter of the circle. Unfasten the zipper, and stitch the two circles together with right sides facing each other at a distance of 1 cm from the edge.

Turn out the resulting cover and iron it. Cover the hoop tightly with strips of padding polyester, and then with the same fabric as the product itself. This will be more reliable during subsequent use.

Insert the hoop into the case with your hands. Using strong thread, make blind seam around the entire circumference.

You need to hang the finished swing using belt straps. To do this, the workpiece must be divided into 4 equal parts. Thread the ends into cells specially made for slings, tie them in a knot, and melt the edges with fire. This is so that during use the tape does not begin to unravel.

It’s not at all difficult to make or buy a hanging chair for yourself. The main thing is that it matches the interior and fits perfectly into the decor.

It is also important that the product is convenient. To determine this, you just need to sit down or climb into it. Do not hesitate to do this in the store, since the comfort of your rest will depend on the convenience and strength of the swing. Once you get a wicker hanging chair, you will say goodbye to stress forever, as you will have cozy place for privacy.

Easy to create with your own hands. This does not require financial costs, a lot of time or physical effort. It is enough to show your imagination and watch a few master classes to see how easy this design is to manufacture. We decided to make our own instructions in this article.

Making a wicker version of the chair

Selection of suitable materials

To create a pendant with your own hands, you do not need any special skills. The design is very simple - metal base and woven fabric.

Required list of tools and materials

Two metal hoops of different sizes. A diameter of 80 centimeters is suitable for the seat, and about 110 centimeters for the backrest.
900 meters of dense cord for weaving
Drawings that can be easily found on the Internet
Slings
Strong rope
Two wooden crossbars
Tape measure, scissors, hand protection.

The required length of the segment can be calculated using the formula S = 3.14xD, where S is the length of the pipe, D is required diameter. For example, if you want to get a diameter of 115 centimeters, then you need a pipe 361 centimeters long. After the calculations have been completed, connect the ends of the tube. To fasten them together, plastic spacers, which are attached with screws, are suitable.

It is better to make the back and seat from strong and at the same time soft ropes with a diameter of 4-5 millimeters. A polyamide cord, which can be purchased at a building materials store, is suitable for these parameters. When working, it makes it possible to create strong units that do not fall apart. Make sure you have enough rope so you don’t have to buy more in the future.

One of the most common and convenient for subsequent use is chess, which even beginners can master.

Assembling the product

Before you fasten the hoops together, consider where the support bars will be located. Before installing them, we advise you to cut them at the ends of the recess so that they do not slip off. Then connect the rings on the opposite side of the installed rods and fasten them with a tight and strong rope.

Making the back

To prevent the hammock from turning out tacky and tasteless, we advise you to maintain consistency in the patterns and weave this part in the same way as the seat. Start weaving from the top, gradually lowering down, and do not forget to firmly fasten the ropes.

Do not trim the remaining threads as they can be used to hang decorative beads. Fix strong cords on the hoops in four places that can be intertwined. You can hang the product on them when it is ready.

We post

To be placed on summer cottage it can be hung horizontally using slings wooden beam.

However . For this it is necessary to ceiling drill a hole and pour a special solution of high-strength polymers into it. After this, you can insert a special holder or hook into it. After two or three days, when the structure is fixed in the ceiling, you can hang the seat.

Master class on creating a hanging chair with your own hands from fabric

In addition to the wicker hammock, there is a fabric option. It is suitable for those who have not yet mastered the macrame technique. For this type, an ordinary metal gymnastic hoop, which can be bought at any sports store, is suitable. Here you can show your imagination and use any fabric, creating a kind of soft and cozy cocoon.

Collecting materials

In addition to a hollow metal hoop, a textile hammock chair is necessary.

3 meters of thick fabric
Down or synthetic padding for filling
Fasteners
About 3 meters of edging material
About 9 meters of belt tape
Sewing tools

Let's get started

First you need to make a fabric base. To do this, you need to cut two circles of one and a half meters in diameter from a three-meter cloth. To make it smooth and beautiful, you need to cut the fabric into two parts, then fold each four times, and after that, marking a radius of 65 centimeters and the border of the circle, cut off all excess.

We fasten the slings

We straighten the resulting circles and begin marking the places for the securing crossbars. It is advisable to fold the woven blanks together so that all the marks and slots are the same. Holes for the crossbars are made at angles of 45° and 30°.

Working with fabric

Next, straighten the material and place it right sides inward. Sew a zipper to one of the parts, which follows the diameter of the metal hoop. After this, we sweep both parts along the edges, turn them inside out and step back from the edge to 7 centimeters and again go around the perimeter with thread. This way we leave a hole for metal frame. Turn the product inside out again.

Now you need to fill it with padding polyester. To prevent it from rolling or bunching, secure it with a hidden seam. To make the chair softer and more comfortable, treat the metal surface with synthetic padding. To do this, you need to wrap the frame with strips of material and secure with threads.

Hanging a hammock

Now it's time to secure the belt tape. First, you need to divide it into four parts and thread it through the holes in the fabric intended for fasteners. It is better to treat its ends with fire so that the belts do not suddenly unravel during operation. After you have wrapped the ribbon around the hoop, machine stitch it and secure it.

If you need to adjust the height and tilt of the hammock, then thread the free ends of the tape into strong metal buckles. After this, all fasteners are assembled and secured to the ring. It, in turn, is attached to a pre-prepared ceiling using a hook or carabiner.

Where to install hanging furniture

If you have a large living room, then such a hammock will be a great addition to the rest of the furniture, without making the space heavier. It would also be a great solution to install such a device in. Light rocking and a comfortable head start will relax both you and your child. In the bedroom, attach the structure closer to the window. Moreover, if the fabric of the hammock is combined with the material of the bedspreads or pillows, it will merge with the entire interior and become an integral part of it.

Coziness, comfort, and peace in the house largely depend on the furniture. The strictest requirements are imposed on its selection. Furniture should be comfortable, safe, reliable. The appearance and style of the products also plays a huge role. Consumers prefer original products that are not similar to others. The most unusual item in the house can be a hanging chair.

Hanging chair shaped like half a ball

This is the most popular design trend in our time, although such a chair first appeared in the fifties of the last century. It's different amazing properties: rocks, calms nervous system. And its role in design can hardly be overestimated! In this article we will look at detailed instructions on the construction of such furniture from scrap, available materials.

You can make a beautiful rattan hanging chair with your own hands

Hanging chair on a stable stand

Light swaying stylish design, extraordinary appearance - all these are the undeniable advantages of hanging chairs. They are intended mainly for private homes. However, there are models made specifically for apartments. In the store, such furniture is not cheap. When you can’t afford the purchase, you can make it yourself. There are many advantages to such a solution.

Saving money. Most of the store price goes towards renting the premises, paying for the brand, wages personnel. The cost of the product is small. Why overpay? For self-production you will need available, cheap materials. Savings reach almost 90%.
Ease of operation. The process of making a hanging chair is quite simple. Any person can handle this job. The most important thing is desire, a little free time. The success of the result also depends on accuracy and responsibility. During the work process, you should scrupulously follow the step-by-step instructions.
Another reason for pride. Furniture created independently will become a special source of pride for the owner of the house. Not everyone can boast of such fakes. When inviting guests into your home, you can surprise them with your design talent.
Creation unique design. Standard furniture is quite boring, original designer furniture costs a lot of money. In this case, there is nothing better than making a hanging chair with your own hands. Its design, appearance, shape will depend only on the flight of your imagination. Such furniture will become an extraordinary interior decoration in any style.
Possibility to pick up optimal sizes products. In apartments and houses, the rooms are not quite standard size. Choose furniture for them in regular store quite problematic. Independent process production requires an individual approach.

Hanging swing chair can stylish decoration country house, an unusual addition to the interior of any room

We decide on the design and construction

Bedroom design with an original hanging chair

In order to spend a minimum of time on making a hanging chair, from it design features It’s worth deciding in advance. To do this you need to study the varieties possible designs, their features.

A chair with a rigid frame can be hung outdoors

Armchair with soft frame for a children's room

Let's look at the four main types of such chairs in the table.

Type of design	Features, advantages
1.Rigid wicker frame	Made from acrylic, metal, plastic, rattan, wicker. You can do it yourself if you have weaving skills. The rigid frame is covered with fabric and leather strips. The advantage lies in the universal design. Such furniture is suitable for an apartment, house, or cottage. Among the disadvantages are the complexity of manufacturing and high cost in the store.
2.Soft frame (analogous to a hammock)	This hanging chair looks like a regular hammock. The difference lies in the method of hanging. The hammock is mounted on two supports, the hanging chair is mounted on one. The design is very convenient during operation. Suitable for a children's room. May have a removable cover. The selection of similar products in the store is quite large.
3.Cocoon chair	Has a modern appearance. Fits perfectly into the Art Nouveau style. It features a rigid frame and wicker walls. Making such a design with your own hands is problematic. The main advantage is the ability to hide from the outside world. Wicker walls allow a person to privacy and relax. There is only one drawback - the high price in the store. But at the same time, the diversity of design is pleasing. In the store you can choose products for a room in any style direction.
4. Drop chair	An original design that allows you to bring originality to any interior. The teardrop chair is more like small house. This option is perfect for a children's room. It has large dimensions, making it possible to accommodate maximum comfort. During the day, in such a “house” you can play with toys, read a book, or play on the phone.

White hanging cocoon chair

Fabric drop chair - budget “tree house” for children and adults

Having decided on the shape, you need to start thinking about design details. It’s worth choosing the color of the cover, pillows, and coming up with original decoration. The color of the textiles should be in harmony with the colors prevailing in the room where the hanging chair will be placed. The hanging rope can be replaced with a chain. This solution will be relevant for rooms decorated in oriental style.

Hanging chair in the living room in oriental style

For children, the product can be decorated with blue ribbons and various marine ornaments. The child will be delighted!

Child's chair in nautical style

Necessary materials, tools

As you can see, a hanging chair can be built in different forms, from various types material. You need to choose a design based on several important criteria: room size, own skills, interior style, financial capabilities. If you have skills in weaving, you can make a product with a rigid frame. It will last longer and can fit even into a city interior. An ordinary vine is suitable for weaving. However, the complexity of the work and lack of skills force us to abandon products with such frames.

Without the proper experience and skill, many people ask the question: how to make a hanging chair with a simple design? The easiest way is to make a product from an ordinary hoop. An ordinary iron hoop can be found in almost any home. If you don’t have it, buying such a product in a store is not a problem. It is inexpensive and comes in a wide range of sizes.

The most important thing is to find a hoop suitable diameter, sections. The cross-section of the pipe should be at least thirty millimeters, the diameter should be about a thousand millimeters. For small room you can choose a hoop with a smaller diameter. Also, for a hanging chair you will need three pieces of fabric. The fabric should be durable, soft, beautiful. Two cuts measuring 1200x1200 mm, one 200 mm wide, 4000 mm long. To match this fabric you need to choose fabric for pillows. It can be brighter and have an interesting pattern. You should also prepare: synthetic padding, a durable nylon cord, two carabiners, rings for hanging, a zipper (length 1000 mm), a border for processing cutouts. You will need few tools: thread, needles, sewing machine, scissors, tape measure, marker.

Materials and tools you may need

Step-by-step instruction

The following instructions will help you make a hanging chair with your own hands.

Prepare everything you need. To work you will need big table, some free space, additional lighting. Place all materials and tools listed in the previous section nearby. Proper organization workplace will allow you to do everything much faster.
Lay the fabric for the cover on the table. Place the hoop on it in the center. Using a tape measure, mark a circle 250mm larger than the circumference of the hoop. The easiest way is to put the dots, then connect them with a marker. Cut a circle along the resulting line. Next we use the second piece of fabric. Cut out another circle with the same circumference. These are the main elements of the future case.
We spread the fabric on the table, and then place the hoop on it in the center

Mark the circle with a marker and cut out a circle from the fabric along the marked line.
Fold one circle in half and cut. You need to attach a zipper to the central size line. Step back 250 mm from the edge of the cut and secure the lock. Once the lock is securely stitched, you can sew the cover around the circumference. Next, turn the workpiece inside out and carefully lay it out on the table.
Ready-made elements of the future case

Fold one of the cut out round pieces in half and then cut it

We attach the zipper, and sew the two halves of the cover around the circumference
Make markings for the cutouts. To do this, place the finished cover on the hoop. Determine the cord attachment points. Make four cuts. To make them look neat, trim the cutouts with braid.
We mark the product according to the drawing
Start preparing the hoop. In its original form, the hoop will be too rigid. The hoop should be wrapped in padding polyester. First coat the surface with glue. This will ensure reliable fixation of the material. Next, cover the hoop with fabric. This can be done manually.
We wrap the hoop with padding polyester

We cover the hoop wrapped with padding polyester with fabric
Insert the finished hoop into the case through the hole with a zipper. Fasten the zipper. The seating base is ready. Now you need to start fastening and fixing the cord.
We insert the trimmed hoop into the case through the hole into which the zipper is sewn
Cut two cords of 2200 m, two - 2800 mm. They are the ones who will hold the seat. Fold each cord in half and tie the ends. Pull the tied ends of the cord through the hoop and into the loop. Tighten.
Cut the required length of cord, fold it in half, tie the ends together

Attach the cords to the hoop
Create a ceiling mount. This is a job for men. Buy a powerful anchor with a hook, make a hole, secure the hook. Attach rings to the cords and hang them on a hook. The whole job will take no more than twenty minutes. The most important - ceiling surface must be strong. The load will be heavy - about 120 kg.
Finished chair hanging outdoors

Securing the chair with an anchor

Decoration

The most the best decoration hanging chair will become an unusual cover for the hoop. It can be sewn from inexpensive fabric of one tone, or you can use exclusive fabric with a bright design. Many people make covers from different scraps. However, then it is very important to monitor the strength of the seams. Bright pillows will be an excellent decoration. They are easy to sew yourself. You will need several parts to get the job done.

Fabric for pillows. The size is arbitrary. Depends on the dimensions of the seat itself and the personal preferences of the owners.
Sintepon. The simplest, inexpensive filler. If you wish, you can choose another, more environmentally friendly one.
Sewing accessories, machine.

It is better to make pillows with a removable cover. Then the cover can be washed when it gets dirty. To do this, first the base of the pillow is sewn, filled with synthetic padding, then the cover itself with a snake is made. Pillows can be decorated with fringe and beautiful lace. There are a lot of ideas for decorating pillows. They can be viewed on the Internet.

The seat itself can be decorated with bright ribbons. This idea is especially relevant when decorating a children's room for a girl. Bright pink and red ribbons will make the interior item more original and attractive. Don't forget about the cords. Cords can also be decorated using various details: stick butterflies, decorate with beads, bright textiles.