Roller blinds on plastic windows without drilling: example of installing roller blinds video. Curtains for plastic windows (50 photos of ideas and new products) Roller blinds without drilling
The first mention of roller blinds came to us from Ancient Egypt; the Egyptians covered the windows of their houses with papyrus, protecting their homes from the scorching sun, and in the evening, when the heat subsided, the curtains were tightly rolled into a roll. The mechanism for raising and lowering roller blinds was a lever transmission identical to that used in wells for raising water. The idea of covering a window with roller blinds was readily borrowed from the Romans into their everyday life, but papyrus is being replaced by fabric, thanks to dyes and a variety of materials, and there is also a choice in window design. In our time, the ancient idea of roller blinds found its application during the Prohibition era in the USA. Bar workers curtained the windows with rolled fabrics so that the police could not see from the street what the establishment's visitors were consuming. Today, anyone can buy roller blinds to decorate the windows of their apartment so that nosy neighbors do not observe your personal life.
Roller blinds Moscow
In the capital, roller blinds began to be used when decorating windows relatively recently. The market for roller blinds has been actively developing over the past 15 years; there are about 9 large manufacturers of sun protection systems in Moscow and the region, including us.Roller blinds for plastic windows
A variety of systems and mechanisms for roller blinds without drilling allow you to install them on any window indoors. Let's look at some of the systems that our online store of roller blinds offers:
Roller blinds to order in Moscow
Hi all! Today I want to touch on the topic of window decor. Curtains and tulle are becoming a thing of the past; they are being replaced by modern and stylish blinds and roller blinds. But not everyone understands how to attach them.
Some people think that it is necessary to drill an opening for them. But in fact, modern roller blinds can be fixed without drilling. Want to know how? Read the article.
Plastic windows are distinguished by a lot of positive qualities, including strength, durability, and reliable protection of the room from noise and dust. To increase the comfort and aesthetics of the interior of the premises, curtains are attached to the windows, roller curtains are very popular among them.
This article is all about installing roller blinds without drilling (you can learn more about the features of self-installation of protective curtains by watching the video).
Modern double-glazed windows have replaced classic wooden windows in residential, public and industrial buildings. The interior of rooms with installed plastic windows requires alternative design solutions, especially for curtains and curtains.
Manufacturers offer a wide selection of roller blinds that fit perfectly into modern interiors and perfectly complement the design of any room. A special feature of such curtains is a unique method of fastening, which does not damage the walls or the double-glazed windows themselves.
Roller blinds can be used as an independent element of finishing window openings, or combined with classic curtains. The positive side of using such curtains in the interior with classic fabric curtains is the protection against fading in the sun that roller blinds provide.
In addition, roller blinds have a number of positive qualities:
- Versatility - curtains can be used on double-glazed windows of any design.
- Practicality – roller blinds are durable, strong, and easy to care for.
- Environmental safety - curtains are made from environmentally friendly materials that do not cause diseases and do not emit toxic substances into the air.
- High functional performance - with the help of roller blinds it is possible to reliably isolate the room from access to sunlight, while the curtains themselves are not subject to fading and retain their original color and appearance.
- Wide range of design solutions - manufacturers produce curtains in a wide range of colors, it is not difficult to easily choose ones that suit any interior.
- Easy to install - curtains are easy to install; it does not require special professional skills or expensive installation equipment.
Types of roller blinds
Roller blinds are usually divided into several types depending on the method of fastening used and the design features of the curtain lifting mechanism.
The main types are:
- “Mini” - used on plastic windows of simple designs. In them, the drum with the canvas is open. These curtains are fastened using self-tapping screws or double-sided mounting tape. The design is lightweight, so it is attached to the tape quite firmly. Roll systems of simple design, which include “Mini,” are economical and affordable for all segments of consumers.
- Cassette system "UNI" - in this design the curtain is located inside the box, its movement is carried out along the side guides. The box is securely mounted on a plastic window profile, and the occurrence of gaps and gaps is absolutely eliminated. The laminated box can have different colors, tinted to resemble natural wood, or made to match the double-glazed windows. The UNI system is attached directly to the frame, without the need to drill mounting holes. When installing the system, the equipment is hung using self-tapping screws to the glazing beads.
- Double curtains “UNI-2” - this engineering system, equipped with a modern spring mechanism, is the most advanced. "UNI-2" is installed in the upper and lower parts of the double-glazed window, which allows you to open the curtains up and down. To make double curtains, fabrics of various textures and colors with varying degrees of light transmission are used. The combination of fabrics achieves the optimal ratio to ensure the desired degree of illumination in the room. The guides are installed outside the window opening and are shaped like the letter “P”.
Manufacturers produce Zebra roller blinds, which differ from other roller blinds in the design of the fabric. The curtain consists of alternating strips of dense fabric and light-transmitting fabric, which makes it easy to change the intensity of the light flux without raising the curtains.
Features of installing roller blinds
When installing roller blinds, there is no need to drill mounting holes, which undoubtedly simplifies the entire process of hanging the equipment. There are two types of fastenings for roller window systems:
- Fastening with hooks that simply cling to the top of the sash.
- Fastening equipment with double-sided construction tape.
Attention! The surfaces on which construction tape is glued must first be degreased.
Detailed recommendations for installing curtains with step-by-step instructions are included with each purchased product. By following the instructions for assembling curtains offered by the manufacturer, you can easily and quickly complete the work yourself.
When installing roller blinds, be sure to use a building level; this will protect against distortions and help secure the curtains as accurately as possible.
Source: inter-er.ru
Installing roller blinds on plastic windows without drilling
The popularity of using plastic windows has made it possible to take a new approach to the design of window openings. A wide range of window accessories will satisfy even the most demanding customers.
Roller blinds have gained well-deserved popularity when draping windows; one of the main advantages of roller blinds is the ability to install roller blinds on plastic windows without drilling.
In order to hang the roller blind model you like on the window, you do not need a specialized tool (drill or hammer drill), and there is no need to make complex measurements.
All you need is a pencil, and everything else has been carefully prepared by the manufacturers of this wonderful window accessory.
But before you start installing roller blinds on plastic windows, you need to understand what types of roller shutters there are, how they differ and what features each type of design has, because it is the combination of different characteristics that allows you to achieve incredible transformations in the design of rooms.
Types of roller blind designs
Various designs of roller blinds can be installed on windows without drilling. Let's look at each of them. Despite the different types of structures, the principle of operation is the same; the fabric is wound into a roll onto a shaft, which is secured with curtain holders at the base of the structure.
Roller blinds MINI system
Installing minirolls on PVC windows without drilling is exactly about this type of construction. The mini roller blind system is adapted specifically for mounting on a Euro window sash and allows you to make the accessory almost invisible, a roll of fabric is wound on a specially reduced aluminum shaft with a diameter of 17 mm.
This design is widely used in decorating plastic windows due to its low cost and wide variability of finished products suitable for standard sizes of plastic windows.
A weighting strip is provided at the bottom of the canvas to ensure uniform tension of the material. This system is attached directly to the window sash using miniature brackets.
Roller blinds of the Standard system
Also called classic. A distinctive feature of this type of roller blind design is the diameter of the cornice, which is from 25 mm to 35 mm (an aluminum tube on which the fabric is wound).
The canvas in such a system is free-hanging. It does not have lower fixation and lateral restrictions (guides as in the uni system). There is also a weighting strip at the bottom of the canvas. This system is attached to the top of the window opening, and since the mount is universal, the curtain can be attached to both the ceiling and the wall.
If you are looking for roller blinds to darken a large opening area. The roller blind of the standard system is exactly what you need.
The shaft on which the fabric is wound is hidden in a decorative plastic box; the box is made in different colors, can be made to look like wood or imitate the structure of a double-glazed window.
Most often, cassette-type roller blinds are mounted on the window sash. Depending on the shape of the window bead, cassette curtains are made in two versions UNI 1 and UNI 2.
The difference is the fastening of the guides; in the first case, the guides are attached to the inner surface of the bead, and the canvas is as close to the glass as possible.
In the second case, U-shaped guides are used, which are attached to the outside of the bead. The fabric sheet of the roller blind does not move between the glass and the guide, but between the border of the frame and the guide, resulting in a gap of 10 mm between the window and the sheet.
To prevent the fabric from “walking” during opening and closing of the window sash, in open structures, fishing line is used as guides, which reliably fixes the fabric sheet in height.
In closed structures, plastic guides are used, which, in addition to fixing the roller blinds, completely limit the penetration of light by attaching them to the outer or inner side of the window sash bead.
Fabrics in roller blinds
The use of fabrics with different light transmission characteristics allows you to solve various problems indoors. From light diffusion of light (lightweight fabric) to complete darkness using blackout fabrics.
Translucent
Simple light-diffusing roller blinds are made from a single layer of synthetic fabric. This fabric allows some light to pass through even when the curtain is completely closed. The main advantages of such curtains include:
Affordable price and a wide range of colors, prints and curtains with different fabric textures. The synthetic material at the base makes the curtains reliable and durable in use. Resistant to temperature changes and high humidity.
This type of fabric is perfect if you want to highlight design elements or, conversely, hide a lack of space using light solid colors in a mini roller blind system.
Blackout
Lightproof blackout roller blinds have the following design. The curtain itself consists of three fabrics; the first and third layers are made from ordinary synthetic fabric, and the central one is made from completely light-proof blackout fabric.
External synthetic fabrics can be made in any color or have an intricate texture or pattern. This type of roller blind is perfect for decorating a nursery, photo studio or presentation room.
Day Night
Another type of roller blinds are day-night curtains; light control is carried out simply because The double fabric consists of dense colored stripes and mesh stripes alternating with each other.
Allows you to play with light and shadow, creating a comfortable darkening or leaving a clear view from the window. This type of curtain combines the advantages of classic blinds and the advantages of original roller blinds.
The advantage over classic roller blinds is that it is easier to see the space outside the window; you do not need to lift the entire curtain, you just need to slightly move the transparent fabric.
Different system options allow you to install a day-night roller blind both on a window sash without drilling using double-sided tape, and in the classic way on the entire window opening.
If the kitchen is small, then it is better to choose light colors, they will visually add volume.
If the kitchen is large, then simple light colors will not look expressive, but various decorative finishing elements, curtains with photo prints, bright and light colors will add variety.
Roller blinds not only provide a good view of the window, but also perform a sun protection function.
Translucent blue fabric makes the room airy and cooler. The warm colors of the fabric emphasize the cozy atmosphere created in the room.
Please note that the roller blind has a width of 5 to 10 cm. Thus, after installing the roller blind on the window, a protrusion will appear that may prevent the sash from opening, take into account the increase in distance before installation.
Features of caring for roller blinds
Favorite places for dust and dirt particles to accumulate are the folds of the fabric and the upper surface of the roller. As a rule, this happens if the roller blind has not been used for more than one week.
The simplest and most effective way to dry clean roller blinds is to use a vacuum cleaner. To do this, you need to remove the roller with the canvas, after first lifting the roller blind.
Carefully spread it on a flat surface and use a vacuum cleaner at a low power level to prevent the fabric from “chewing” or bending.
If there are fresh stains on the fabric, for example, left by fingers. An alcohol wipe works great; just gently rub it over the stained area to completely get rid of the new stain.
You can also use a regular eraser for this purpose.
If a stagnant stain is found on the roller blind and the methods described above did not help, then you can use the wet method of cleaning the roller blinds.
The simplest and most accessible way is to use a regular sponge and dishwashing detergent. Apply a few drops of detergent to the soft side of the sponge, squeeze the sponge a little until foam appears, and then walk the damp surface over the dirty area.
If the contamination is extensive and it is not possible to remove it with improvised means, then the most correct decision would be to seek professional help from a dry cleaner.
The open control mechanism also requires a little attention, which will have to be lubricated from time to time, no more than once a year. Any silicone-based lubricant is suitable for this.
Using a cassette roller blind on a plastic window with blackout fabric in a children's room together with patterned tulle. It will completely isolate the room from daylight. And the side guides will prevent the penetration of angular light by hiding the gap between the edge of the fabric with plastic guides.
- The fabrics of roller blinds are impregnated with a special composition. This will allow the roller blinds not to fade in the sun and are not afraid of dirt.
- Dust and pet hair do not stick to roller blinds. Luckily, the housewife doesn’t even need to wash them, but simply wipe them with a cloth.
- In some models of roller blinds, antibacterial substances are used in the impregnation composition
- Roller blinds do not wrinkle
- The lowering and raising of the fabric roller shutter is controlled using control mechanisms, which eliminates touching the fabric, allowing you to avoid unnecessary contamination. And making the light supply process smoother and more accurate.
- Combine decorativeness and functionality
- Compact, when closed the roller blind is practically invisible.
Using roller blinds on plastic windows
If your windows are on the east or southeast side and direct sunlight is a constant guest in your apartment in the first half of the day.
Exposure to direct sunlight can cause some discomfort; to solve this problem, a curtain with a light transmittance of 50% is perfect; such a roller blind completely transmits light, while absorbing the sun's rays, creating the effect of diffused light.
Roller blinds in the kitchen
The kitchen is the place where every housewife spends a significant part of her time, which is why every detail in interior design is so important. The use of different colors in the design can significantly change the atmosphere of the kitchen by increasing the space or adding zest by adding illustrations to the interior on a specific theme.
The best option would be to use mini roller blinds with fastening without drilling. For a greater insulation effect both from direct rays and from the prying eyes of passers-by, you can use a cassette design with blackout fabric.
If you need to be able to control the flow of light, roller blinds are perfect, day-night, which are also mounted on a separate window sash without the use of a drill.
In office premises
In office premises, an excellent solution would be to use roller blinds with a light transmittance of 50%; this will allow you to avoid sunlight, and the evenly transmitted light will not distract from work, also eliminating the appearance of glare on computer monitors.
In conference rooms, curtains with blackout fabric that completely isolate light are suitable. Allowing you to concentrate on negotiations, and the simplicity of the design of roller blinds is an undoubted advantage over classic blinds or fabric models.
To decorate a nursery
When decorating a children's room, you need to pay special attention to window drapery. Thus, the use of classic fabric curtains can lead to the appearance of a source of dust accumulation, which is not very favorable if your child is still a toddler.
Excessive and constant exposure to bright, glare light can also lead to discomfort. The importance of illustrations and drawings in design elements cannot be underestimated. Using roller blinds on plastic windows to decorate a nursery will solve all this problem.
Taking into account the interests of the child, you can choose a photo print with your favorite characters; installing a mini design on the window sash will free up the window sill, using the freed up space for your favorite fakes.
Thick, light-proof blackout fabrics will not only protect your baby's daytime sleep, but also maintain room temperature, creating a natural barrier to cold air on winter days.
Attaching a mini roller blind to a plastic window sash without drilling
We measure the width - It is necessary to measure the width of the window glass and add it to the width of the glazing beads on both sides (a glazing bead is a plastic strip with a rubber seal, the main purpose of the glazing bead is to strengthen the window from the inside, prevent the penetration of dust from the street, and also enhance the sound insulation effect.) This will help. block the flow of daylight.
- We measure the length - The length is the height of the entire window sash.
- Degrease the surface – For better gluing, it is recommended to degrease the contact areas of the adhesive tape on the curtain parts and on the glass frame.
- assembling – We connect the mechanism bracket with the window clamp.
- Putting marks – We mark with a pencil the boundaries of the brackets to the window frame.
- We attach it to the sash. – Remove the protective surface from the double-sided tape and fasten the bracket according to the marks marked on the frame.
Choosing the location of the control mechanism – The chain control mechanism is usually placed on the side where the window hinges are attached, minimizing the visibility of additional elements.
Installation of the guide string. To avoid sagging, a fishing line is used; this will allow the roller blind to fit tightly to the frame.
At the bottom of the sash we attach a fishing line weight, thread the string into the eye of the tensioner and secure it using a rotary locking mechanism.
To fix the upper position of the curtain, you need to fully raise the curtain and use the clamp included in the kit and set it to the desired height. We do the same thing to fix the lower position, lowering the blade completely and installing the lock in the desired position.
To achieve the effect of symmetry, make sure that both sides of the curtain, both in the lowered and raised positions, have the same level of fixation.
Installing roller blinds on a stationary window without using a drill
- We insert a cross into the mechanism bracket for attaching the roller blinds.
- We attach the assembled bracket to the roller blind and attach the assembled curtain to the window frame.
- We mark the places where the brackets are attached to the frame.
- Be sure to degrease the surfaces to be glued both on the window frame and on the roller blind.
- Prepare for marking – We install the assembled brackets on the roller blind, mount it on the window for subsequent marking on adhesive tape.
- We remove the protective film from the double-sided tape and glue it to the grease-free surface of the bracket, and the bracket itself to the marked place on the window frame.
- At the bottom of the frame, also glue the board for the string tensioner using double-sided tape.
- Attach the string tensioner to the bottom board.
- We install fastening mechanisms on the upper brackets.
- We fasten the guide string in the eye of the upper bracket, cut off the excess length of the string and pass the curtain through the eye of the lower curtain weight.
- We mount the roller blind into the fastening mechanism
- We pass the guide string through the eye of the weighting material. We attach the string to the lower tensioners.
Today we will talk about decorating room windows with roller blinds.
A roller blind is more likely to be an addition to the main decor of the window, protection from direct sunlight, and appears as an independent element less often, mainly in the kitchen, loggia and utility rooms.
When rolled up, it is almost invisible, however, when unfolded, it can protect from light and darken the room during rest and sleep.
The curtain is a rectangular fabric that is rolled into a roll using special mechanisms, hence the name - roller blind or roller blind.
Types of roller blinds
Roller blinds can be divided into types based on fabric structure:
- dense fabrics that do not transmit light (100% darkening);
- medium-density fabrics that transmit light, but protect from bright sunlight, as if scattering it (darkening 30-50%);
- transparent or translucent fabrics, sometimes combining two types (for example, day-night curtains), which are the main decor of windows;
- curtains made from natural plant materials (sisal, bamboo, jute, linen).
In addition, the fabrics used for curtains can be plain or patterned. Manufacturers offer a wide selection of plain fabrics of various colors and shades, and even more textured fabrics and fabrics with various patterns: floral, ornamental, striped, checkered, etc.
According to the type of mechanism and method of fastening, curtains can be divided into the following types:
- with a simple mechanism on a chain and an open system;
- curtains with a spring mechanism;
- roller blinds with a box and side guides attached to the frame vertically and fixing the canvas (suitable for roof windows and flaps) - cassette systems;
- curtains with an electric remote control mechanism.
Cassette systems and vertical guides for them are available in several colors: white - for white window frames and various shades of natural wood for double-glazed windows of the corresponding color.
What type of mechanism and fabric density to choose for curtains depends, first of all, on the purpose of the room and the interior as a whole. Roller blinds can be installed above the window opening, inside the opening, or directly on the window frame or window sashes.
So for a bedroom, especially one with windows facing the sunny side, it is better to choose a roller blind made of thick fabric with a high degree of light protection in neutral pastel shades to ensure a comfortable rest. This will save you from unnecessary heavy curtains that act as a dust collector. It will be enough to decorate the window with light tulle, which will undoubtedly give the room lightness and airiness.
Roller blinds for children's rooms are often chosen in brighter shades, matching them in color with walls, furniture or the main accents of the interior. For children's rooms, manufacturers offer curtains with drawings of fairy-tale characters; for older children - with bright prints, striped or plain.
A roller blind in the kitchen is especially good if the working surface of the kitchen unit is located on the window side.
Fabric with a medium degree of light protection will transmit light and diffuse the sun's rays. A curtain lowered to the middle of the window will decorate the window and at the same time provide an opportunity to view the landscape on the other side of the window.
Recently, roller blinds have increasingly begun to decorate loggia windows.
However, in addition to decoration, the loggia also has to be protected from direct sunlight, especially if there are plants on it. An excellent solution would be a “day-night” roller blind or, as it is also called, “zebra”, which is a double, freely hanging striped fabric with stripes of the same width, but different in translucency. The stripes, moving relative to each other, allow you to adjust the luminous flux.
This curtain resembles blinds in appearance and looks equally good both on loggias and in living spaces.
If you decide to install a roller blind over the upper slope of the window opening, then remember that its size should be 10 cm or more wider than the opening (optional), in order to avoid side gaps.
For roller blinds on roof windows, a spring mechanism is used that keeps the curtain taut. The mechanism can be controlled manually or remotely using a remote control. The second option, of course, is much more expensive, but also more convenient, especially if the windows are located high.
Installing roller blinds on plastic windows
Today, many people install plastic windows in their homes and offices, and when decorating them with roller blinds, the question reasonably arises: how to hang a roller blind on a plastic window without drilling and damaging the plastic frame. This is especially true if the warranty on the windows is still valid, or the roller blind is temporary. Everything is quite simple.
To attach brackets without drilling, you need to choose a model with metal or plastic corner hooks, which are hung on the opening window sash in its upper part, and the brackets are attached to them.
Cassette roller blind systems can be fixed to a plastic window without damaging it using double-sided tape. Vertical guide curtains are attached in the same way.
But it is still more reliable to install roller blinds on plastic windows using self-tapping screws. When purchasing curtains, pay attention that the kit includes instructions for self-assembly and installation of all mechanisms. This will help you assemble and secure the purchased roller blind without the help of a specialist.
Price issue
The cost of roller blinds in general is not high and depends on the chosen system and type of fabric.
The simplest curtain with an open mechanism on a chain 120x175 wide, depending on the type of fabric (lightproof, plain or with a graphic pattern), costs between 900-1600 rubles. Roller blind “day-night” size 100x175 from 1900 rubles. The cassette system will cost more due to additional mechanisms and will average 5,000-11,000 rubles for a curtain measuring 120x175.
If you want to admire beautifully draped curtains, but the first floor forces you to hide from prying eyes, pay attention to roller blinds for plastic windows without drilling. These functional products will cope with the task perfectly. With their help, you can also reduce the amount of light and heat entering the room. We offer you to understand what blinds and roller blinds can be, and how to install them without drilling holes.
Read in the article
Which roller blinds and blinds can be mounted on plastic windows without drilling: existing varieties
The design of roller blinds can vary greatly. Before you give preference to a certain type, it is worth getting acquainted with the existing ones, as well as how you can hang roller ones.
The design of the structure is selected taking into account the features of the interior Free-hanging roller blinds for plastic windows
The most affordable option, represented by a wide range of models. In such designs, the drum on which the fabric is wound is open. Free-hanging roller blinds do not sag the moment the shutter is tilted or opened. Various materials are used for their manufacture, and the movement of the web can be provided by manual or automatic drive.
Simple and automatic mini roller blinds
The simplest and most affordable option with compact dimensions. The fabric is wound on a small reel located on the sash. A special installation technology prevents frame destruction.
Reason #1. Magnetic holders allow you to fix the bottom rail, thereby preventing the canvas from sagging.
We invite you to look at photos on plastic windows:
Depending on the drive used, systems can be mechanical or automatic. The first ones are opened and closed manually, while the second ones are done using a remote control. Automatic systems operate on batteries or mains power.
“Zebra” – mini roller blinds
Zebra roll systems have a double web. It alternates dense and translucent stripes. Due to the displacement of both canvases, the intensity of the light flux changes.
Reason #2. Such structures rarely go up: combining dense stripes allows you to achieve optimal results in terms of light transmission.
We invite you to look at photos of similar structures:
Cassette roller blinds for plastic windows: design features and types
To accommodate the shaft for winding the fabric, such systems use a special box, designed in different colors. The cassette roller blinds themselves move along guides attached to the plastic windows. This ensures optimal protection from the glare of the sun.
Simple and automatic uni-blinds
When folded, the canvas inside the box is not noticeable and is reliably protected from exposure to ultraviolet radiation.
Reason #3. Roller blind guides prevent the curtain from sagging. The required height of the canvas is adjusted using a chain. A special clamp attached to the frame allows you to fix the chain and prevent it from sagging.
Attention! Installing an electric motor allows you to automate the opening and closing process.
We invite you to look at photos of cassette roller blinds on plastic windows:
1 of 6
“Zebra” – uni-roller blinds
Alternating “blackout” and “dimout” stripes on a double canvas allows you to adjust the luminous flux. It is enough to move the stripes so that more light enters the room.
1 of 6
Leading manufacturers of roller blinds
Many manufacturers offer quality products. When choosing roller blinds with guides for plastic windows, pay attention to the products:
- Foroom. The Russian company manufactures systems to order in specific sizes. Finished designs are sent by mail;
- Marand. The company, located in Rostov-on-Don, offers modern, high-quality products;
- Isotra. A well-known Czech brand that produces blinds and curtains for plastic windows;
- Besta. The products of the Polish company occupy a leading position in the market due to the high quality of their products;
- Bamar. The manufacturer offers reliable and high-quality models;
- Hunter Douglas. The undisputed leader, whose branches operate in more than a hundred countries.
How to choose roller blinds for plastic windows based on translucency
The throughput of such systems can vary significantly. It is important to know how to choose rolled ones so that they let in enough sunlight and protect from the cold.
Translucent fabric roller blinds for windows
The appearance and functionality of the mounted systems depend on the characteristics of the material used in the manufacture of a particular model.
Reason #4. Roller blinds for plastic windows have a unique and varied design, which allows you to choose a model for anyone.
Fabric roller blinds for windows can be:
- transparent. Used exclusively as a decorative element. They scatter the sun's rays quite well and are used together;
- "dimout". The material is able to partially transmit light, becoming a barrier to thermal energy. This is a suitable option for decorating living rooms, offices, etc.
Blackout roller blinds: the highest degree of shading
For the production of blackout roller blinds, a material with the lowest light transmittance is used.
Reason #5. This is the best option for a children's room. They are often installed in rooms with a home theater.
Advantages and disadvantages of attaching roller blinds to plastic windows without drilling
The popularity of such designs is due to:
- versatility. Roller blinds can be installed on any plastic windows, regardless of the characteristics of the double-glazed windows;
- practicality. The installed product takes up minimal space;
- decorative function. Rolshors allow you to add uniqueness and style to anyone;
- ease of installation. You can install roller blinds on plastic windows yourself;
- functionality. With the correct material density, the design protects the interior well from excess light and heat;
- long service life ensured by environmentally friendly impregnation that prevents products from fading.
Among the disadvantages, the high price of high-quality models should be noted. Also, due to the too simple design, such structures do not always look appropriate in luxurious interiors.
Which roller blinds are best to buy for installation without drilling: features of choice and popular models
If you decide to buy roller blinds, you should decide on their purpose and design features. Then select the following:
- material depending on the desired transparency;
- color. The design must be combined with the furniture and walls in the room;
- control method. If the room is large enough, you should think about installing automation. Manually controlled systems will cost much less;
- size.
Popular models include:
| Roller blind | Characteristics | Price (as of October 2018), rub. |
| Blackout narrow curtain SCENARIO | Latch fastening. There is a heavy rail at the bottom. Height 1.7 m. Allows cutting to width. Fabric – polyester. | |
| Curtain "Marquisol" gray | 140 × 175 cm. Weight – 1.47 kg. | 899 |
| “Minirollo. Plain" from "Escar" | Possibility of choosing a width within the range of 37 – 83 cm. Installation with double-sided tape. | 599 |
| Cassette roller blinds UNI – “Stars” | Possibility to choose width within 0.3 - 1.3 m, height within 0.3 - 2 m, as well as location of the control system. Installation with double-sided tape. | 1579 |
| “Frost” from “Uyut”, 40 × 175 cm | Weight 0.4 kg. Height – 1.75 m with a width of 0.4 m. | 599 |
| "Blackout" | Possibility of choosing width within 0.3 - 3 m, height within 0.3 - 4 m. Without guides. Installation with double-sided tape. Side fixing line. | 530 |
We invite you to get acquainted with the opinions of real customers.
Review of the Kauffort “Minirollo” roller blind:
More details on Otzovik: http://otzovik.com/review_4097964.html
roller blind Kauffort “Minirollo”
Review of Combo roller blinds “Day-Night”:
More details on Otzovik: http://otzovik.com/review_397477.html
roller blind Combo “Day-Night”
Assembling a roller blind: instructions are provided by the manufacturer
Before installation of blinds or roller blinds on plastic windows begins, it is necessary to assemble the structure. The order of work depends on the design features of a particular model. Each manufacturer, along with the components, includes instructions that tell in detail how to assemble a roller blind and in what sequence the elements should be connected.
Assembly is often performed in the following sequence:
| Illustration | Description of action |
 | We thread the fishing line into the plastic bracket. We securely fasten it to prevent it from being pulled out during operation. |
 | We connect the elements of the holder to the bracket one by one, following the manufacturer’s instructions. All connections must be strong. |
 | Insert the chain into the lifting mechanism holder using a small screwdriver. |
 | We connect the assembled fasteners with the twisted roller blind. You must first decide on the side of the chain. |
We invite you to watch a video that describes the components for roller blinds: Installation of roller blinds on plastic windows using double-sided tape
This mounting option does not involve dismantling the structure. Therefore, work should be performed efficiently and very carefully, the first time, in the following sequence:
| Illustration | Description of action |
 | We attach the assembled structure to the frame to determine where to attach the blinds to the plastic windows. We apply markings. We control the horizontalness of the axis on which the roller blind is screwed. |
 | In accordance with the markings made, we apply fasteners and securely fix them, having previously degreased the contact area. |
 | We install roller blinds on plastic windows in glued holders. |
Attaching roller blinds to magnets using double-sided tape
Neodymium magnets are often used as fasteners; due to their characteristics, they can withstand a fairly large load. With their help, the upper and lower cornices can be fixed.
Magnets can be located at the top or bottom of the system. Located at the bottom, the magnet prevents the curtain from sagging on the open sash.
Advice! Before gluing the magnet with double-sided tape, be sure to degrease the base.
Installing roller blinds on plastic windows with L-shaped hooks
If you plan to use the mounted system from time to time, you should pay attention to L-shaped hooks. Installing roller blinds on plastic windows in this case is quite simple:
- we assemble the system;
- hang it on the sash.
If desired, the structure can be easily removed and stored in. We invite you to watch a video that shows in detail how to hang roller blinds on plastic windows using L-shaped hooks:
How to install roller blinds on plastic windows without drilling: possible options
The sequence of installation work depends on how it was decided to install roller blinds on plastic windows. We invite you to familiarize yourself with the possible options and their distinctive features.
Mini roller blinds: mounting on an opening and a blind sash
The procedure for installing mini roller blinds may differ slightly depending on the design features of the sash. We suggest you look into the possible nuances.
How to attach roller blinds to plastic windows when the sash opens: sequence of actions
To prevent the fabric from sagging during operation, you need to know how to properly attach roller blinds to plastic windows. The work can be performed in the following sequence:
| Illustration | Description of action |
 | Degrease all surfaces that the double-sided tape will come into contact with. We mark the places for the brackets. We install the curtain. |
 | We connect the guide string to the upper bracket and the lower tensioner. |
 | We adjust the degree of tension of the guide string. |
First of all, roller blinds are divided among themselves according to the method of fastening:
- Standard, open or free-hanging. They can be mounted in a window opening, or in front of it - on the ceiling or wall.
- MINI – mounted on the window sash using a bracket. They are assembled into a neat roll and have no guides. If you want to buy roller blinds inexpensively, this is a great choice!
- Cassette systems Uni-1, Uni-2 - fit tightly to the glass, “run” in the side guides, are assembled into a closed box, and look like a single whole with the window. They are suitable for inclined surfaces - windows opening diagonally, attics.
Also pay attention - in addition to the fact that fabrics for textile decoration can be plain and patterned, smooth and textured, now manufacturers offer more interesting solutions:
- Zebra or Day-Night is a double canvas of alternating horizontal stripes of almost transparent and dense matter. When adjusted, the strips move vertically relative to each other. This way you get wider possibilities for varying illumination.
- Blackout – spraying on the reverse side provides reliable protection from sunlight or city lights. In combination with cassette curtain rods you can achieve absolute darkness!
- Photo printing - you are not limited to the range of patterns and designs that manufactories offer! Choose any image that meets your technical requirements and create a truly unique look for your home or office. By the way, such roller blinds serve as a selling or branded decorative element!
The price of roller blinds - what does it depend on?
The cost consists of several factors:
- Fabric dimensions - maximum parameters are indicated in product cards
- Control system - the more convenient and modern it is, the more expensive it is
- Fabric – varies depending on composition, design
- Availability of remote control – it is possible to equip it with an electric drive, adjust it from the remote control, connect to the “Smart Home”