We select and install a mixer with a hygienic shower (watering can) for the toilet. Sink mixer with hygienic shower Criteria for choosing sink mixers with hygienic shower

Sink mixers with hygienic shower are installed in bathrooms small sizes, where free space does not allow installing a separate bidet. According to their own functionality and ease of use, they are no different from the usual bidet, and the cost is several times lower. Another plus is that the faucet can be installed on an existing sink, which further reduces the estimated cost of work and reduces installation time. All equipment can be installed within a few hours.

Wide choose various models allows all users to choose best option both in price and in quality, convenience and ease of use.

Below is a table of the most famous companies engaged in the production of such equipment. Each company has a large selection of products, the differences between them can be very significant.

Brand name	Short description	approximate cost
	The material of manufacture is brass, the external decorative coating is chrome. Has a lever control, ceramic cartridge. A temperature limiter is installed, and there is a function for saving water consumption.	6000 rub.
	Warranty period of at least 5 years, single-lever control, body made of brass. External surfaces are coated with a durable layer of chrome. Ceramic cartridge.	15700 rub.
	Manufactured in the Czech Republic, installed externally, the body is made of brass. The lever is located at the top, there is a wall holder. The liner is standard according to thread diameters, 4 year warranty.	4200 rub.
	It has a traditional round shape, the material is brass, the outer surfaces are covered with chrome. Can be combined with flow-through electric water heater. The water spout is fixed; a wall holder is provided for the shower.	6600 rub.
	Manufactured in Germany, has a ceramic single-lever cartridge. Brass body, anti-corrosion coating– chrome. Good quality at a moderate price.	5400 rub.
	Domestic mixer with hygienic shower, with lever control, brass body. 7 year warranty, adapted to actual water quality. Has a ceramic cartridge.	3700 rub.
	Manufactured in Italy, brass body, gold outer plating. Wall installation, there is a separate holder for the shower. One of the expensive exclusive models.	13100 rub.

Faucet with hygienic shower for basin

If it is difficult to make the final choice on your own, then it is better to use the universal advice of professional plumbing installers.

Features of use

It is necessary to install a sink faucet with a hygienic shower within reach, this way you can ensure comfort of use. The distance from the shower head bracket to the toilet should be chosen so that it can be easily reached by hand, and the length of the flexible hose ensures that hygiene procedures can be carried out. Take these requirements into account when choosing specific model equipment. If the distance from the sink to the toilet is large, then the length of the hose should be appropriate.

You need to know the nuances of use; they will have a positive impact on the choice of a specific device model. Before hygiene procedures, you need to adjust the water temperature.

After selecting the temperature, you can use the hygienic watering can. But you should keep in mind that turning on the watering can simultaneously leads to a drop in water pressure; adjust the pressure force taking this factor into account.

One more thing. If, during hygiene procedures, water is poured through the mixer, this increases its losses.

As soon as the faucet in the sink is turned on, water under pressure enters the flexible hose. This operation scheme increases the requirements for the reliability of a hygienic shower; pay attention to its condition and, if leaks are detected, fix them immediately.

We will tell you how the hygienic shower head works and how to repair it in this article below.

Criteria for choosing faucets for a sink with a hygienic shower

We will not touch on specific brands and brands; decide on them yourself, taking into account design and cost. And on technical features It's worth going into more detail.

Manufacturing material and protective coating technology

Most often, the body of mixers is made of brass, hardware and additional elements are made of silumin. External chrome or nickel plating. How are these materials and technologies different?

1. Chrome plating. The highest quality and wear-resistant coating, hence the high price of such products. During the manufacture of faucets, electrolytic chrome plating technology is used, up to three layers can be applied various thicknesses. Chromium is resistant to most acids due to high degree penetration into the base provides very stable coating. The parts are perfectly smooth and shiny. Chrome does not fade when heated to +110°C, which guarantees color stability throughout the entire period of operation. Surfaces can be cleaned of dirt using any modern detergents no limits.
2. Nickel plating. A cheaper method of covering external metal surfaces mixers. In all performance indicators it is significantly inferior to chrome plating. The method is used during the manufacture of cheap or counterfeit products.

Practical advice. The cost of the final decorative coating in the total price of a faucet with a hygienic shower is only 3–5%; you should not skimp on its quality. Chrome-plated products retain their original appearance much longer, coatings long time do not peel off, do not change color, and do not appear stained. Don't skimp on outer covering, it is much more profitable to use faucets with chrome-plated surfaces.

There are faucets with a body made of silumin - you should not buy such models. They do not last long and often suddenly crack. And the consequences of leaks can be very sad; fixing the problems will cost much more than purchasing a high-quality faucet.

Dimensions

The linear parameters of the device should take into account not only the size of the bathroom, but also the spatial position of the sink and toilet. It is highly desirable that the bracket for fixing the hygienic shower head is located under right hand. This arrangement eliminates many inconveniences during the hygiene procedure.

Pay attention to the length of the flexible hose, let it be with a reserve. If you plan to mount the faucet on a sink, then it must have a special technological hole. If it is not there, then it is better to purchase wall-mounted devices.

Practical advice. If the sink already has an ordinary faucet, then replacing it with a new one with a hygienic shower will not be a problem. Manufacturers will unify all holes and diameters; you will only need to dismantle the old device and install a new one in its place. No complex modifications are required.

Installation and assembly instructions

Let's look at an example of installing a faucet with a hygienic shower head directly on the sink.

Single lever basin mixer GROHE

Step 1. Check the package contents according to the manufacturer's instructions. Figure out where which rubber gaskets should be installed, what elements are intended for installation, etc. Each manufacturer should provide schematic diagram assembly, start installation only after studying it.

Step 2. Install the round rubber gasket on the bottom of the faucet. In terms of size, this is the largest gasket. Check its integrity; if there are leaks, water will begin to leak under the sink, this is a very unpleasant phenomenon.

Step 3. Insert the faucet into place, put it on it from below metal element for fastening. Check the position of the device; the rubber gasket should completely cover the technological hole.

Step 4. Tighten the locking nut. Do not apply too much force; the ceramic sink may crack.

Practical recommendation. Tighten the nut until the rubber gasket around its entire circumference is slightly compressed. Turn the mixer in different directions, it should be held steadily. Do not compress the rubber to the limit, this is very dangerous.

Step 5. Connect flexible hoses to the faucet. There are three in total: two for cold and hot water for mixing and one at the outlet into the flexible hose of the hygienic shower. All hoses have O-rings, do not overtighten them. Modern models do not require much effort for assembly, these old devices used tow for sealing, it had to be tightened tightly.

Mixer hoses connected to taps

Step 6. Install a watering can holder on the wall. The distance from it should allow you to remove the watering can without getting up from the toilet.

Step 7 Attach a watering can to the second end of the corrugated hose.

Step 8 Turn on the water supply and check the tightness of the pressure connections. It is easier to check using pieces of paper. Place it on the floor under the joints and wait 5-10 minutes. During this time, leaks will definitely appear. Drops of water on the paper are clearly visible, determine which connection is leaking and fix the problem.

Important. Malfunctions cannot be eliminated by strong tightening; this is not only useless, but also dangerous. The fact is that the hardware is made of fragile materials and will fail if subjected to strong forces.

To eliminate the leak, you need to unscrew the unit and check the condition of the rubber gasket or oil seal. The main cause of leaks is damage to rubber elements during assembly. If necessary, replace the gaskets with new ones; you can buy them at any plumbing store.

How to repair a watering can

Mixers can have various devices to regulate the water temperature, all users are aware of the features of their operation. But how a hygienic shower head works and what problems may arise during use is not known to all users. We have already mentioned that leaking showerheads can cause flooding in the bathroom; the consequences of flooding are very unpleasant. Before you repair a watering can, you should study the principle of operation and learn about the components.

What elements are used to make a hygienic shower head?

1. Frame. Made of plastic, external surfaces have a decorative coating. A small diameter watering can is screwed to the body with a screw; control mechanisms are located inside. A corrugated hose is connected from below, with back side There is an external lever for turning on the water supply.
2. Metal tube. Made of brass, it serves to supply water from a corrugated hose to the body of the watering can and then to the shower. One end of the tube is pressed tightly against the rubber gasket, the other moves freely in rubber seals installed in the housing plug. When the lever is pressed, a metal tube compresses the spring, the tube falls along the seals and allows water to access the watering can. Two plastic stops are pressed onto the tube to stop the lever.
3. Spring. Made of stainless alloy steel, presses the metal tube to the rubber valve. One end of the spring rests against plastic limiter on the tube, and the second in the plug on the body.
4. Lever (button) for turning on the water. The upper part rests against the drive on the body, the lower part makes reciprocating movements of the tube. Fixed to the body using a metal axis.
5. Stub. It has a hole in which the tube moves; rubber rings are used for sealing.

Manufacturers may slightly change the size, location and materials of the elements, but the operating principle is the same for all.

How to repair a hygienic shower head

We have already mentioned that the watering can is the most important element of a hygienic shower; when the mixer is opened, it is always under pressure, has rubbing surfaces and rubber valves. Each of these elements can cause leaks. Problems appear in three places.

1. Water is leaking at the bottom of the watering can body. The reason is a loose connection between the corrugated hose and the body of the watering can. This is the simplest fault; to eliminate it, it is enough to replace the rubber gasket or tighten the nut a little.
2. Water drips from under the water supply control lever (button). The reason is critical wear of the rubber rings in the plug. The seals must be replaced.
3. Water seeps through the holes in the watering can. The reason is that the tightness of the water supply shutoff is broken. The metal tube in the closed position is pressed against the rubber gasket by a spring, and over time a natural physical deterioration, it loses its plasticity and dents may form. If, in addition to these problems, the technological holes in the body into which the tube is inserted have increased, then during movement it deviates slightly from the axis of symmetry each time. This is the most annoying problem; sometimes you have to buy a new hygienic shower head.

To eliminate the last two faults it is necessary completely disassemble the watering can. How it's done?

Step 1. Unscrew the corrugated hose of the watering can.

Step 2. Using a knife or small screwdriver, carefully remove the plug from the end of the housing. Take it out slowly, pry it from all sides and gradually pull it out. Do not damage the body of the watering can; the plug is seated very tightly. Work carefully, as soon as the element begins to move, lower the body as low as possible to the surface of the workbench. Keep in mind that the spring inside is highly compressed and can fly out at high speed. Take all precautions.

Step 3. Remove the metal shaft from the housing; it holds the control lever. If there is no spring, the axle should be easy to remove. You can remove the axle using an awl or solid wire of a suitable diameter.

Step 4. Pull out the lever.

Step 5. Now you can remove the metal tube and rubber band that closes the water inlet into the watering can.

Step 6. Check the condition of the rubber elements. We have already mentioned that rubber rings and gaskets fail. If critical wear or mechanical damage is detected, replace parts.

Disassembled watering can

Reassembling the watering can body occurs in the reverse order. Take your time; the elements should fall into place without excessive effort. To make the seals fit easier, moisten them with soapy water.

If your water has a high calcium content, then after a few months the holes in the watering can significantly decrease in diameter due to solid calcium deposits. As a result, the streams of water become thin and move at high speed, causing certain inconveniences during hygiene procedures. The problem can be easily solved. Using a sewing needle or thin pin, clean each hole; if you have time, remove the mesh of the watering can to remove solid particles.

When cleaning the holes, do not damage them. Otherwise, the water jets will be directed in different directions.

Installation of a faucet with a hygienic shower on the wall

This method is suitable for all types of sinks and is considered universal. The distance between the mixer inlets is standard and equal to 15 centimeters. The height of the water supply outlets should allow the shower hose to be connected without sharp bends. This is not always possible to do; pay attention to the location of the faucet hose and the size of the sink.

Step 1. Clean the water supply sockets from construction debris and check the condition of the threads.

Step 2. Remove the mixer from the packaging and assemble it according to the manufacturer's instructions. The corrugated hose of the hygienic shower is screwed on after complete installation mixer

Step 3. Screw the faucet into place, do not forget to install rubber gaskets and decorative caps. There is no need to tighten the nuts with great force. The main thing is that the rubber gaskets fit snugly around the circumference of the holes.

Work with a level, constantly check the vertical position. If you have ceramic tiles on your bathroom walls, use special drills to drill holes in them. Never turn the drill into hammer drill mode until you have drilled completely. ceramic tiles. They will definitely crack due to impact loads, and the tiles will have to be replaced. This is a long task, and it is not always possible to find exactly the same tiles.

Screw on the shower hose

To increase the comfort of using a hygienic shower, it is recommended to choose device options with automatic adjustment temperature. Automation monitors it constantly and immediately responds to changes in indicators in one direction or another.

Wall-mounted mixer with hygienic shower

Experienced plumbers can connect a hygienic shower to an ordinary bathtub faucet. This method can be used, but it is difficult to independently select the missing fittings. The fact is that it should not only be functional, but also beautiful. You need to look for special tees and switches; it is almost impossible to do this without extensive experience. This option is sometimes used in old buildings with a combined bathroom, in which warm water is supplied only to the bathtub, and a simple tap with cold water is installed on the sink.

Video – Sink mixer with hygienic shower

A mixer with a hygienic shower is a compact option for people who want to install a bidet, but do not have a large enough bathroom. This faucet is mounted on a sink in a combined bathroom, or on a small sink in a toilet. There are options for concealed installation of a faucet with a hygienic shower head, in which case you do not need a sink.

We do not limit our choice

The online store website presents faucets with hygienic showers in modern and classic designs; options are available in chrome, gold, and bronze colors. Also, you can always choose any shower faucet or concealed faucet and complete it with a hygienic shower head from the section of our catalog with the same name. We recommend a hygienic shower for a toilet with a mixer from German manufacturers Grohe, Hansgrohe, Ideal Standard, Czech models Lemark, products jointly produced by Germany and Italy Am.Pm. Classic models in our catalog are presented by Italian companies Cezares and Migliore.

A hygienic shower with mixer is a smart purchase

The online store site always has pleasantly low prices, a large selection of plumbing fixtures and convenient seven-day delivery. The purchase can be paid in cash at the office or upon delivery, by card in the office or via the Internet, or through an account at any bank. WITH legal entities We work on non-cash accounts.

To maintain body cleanliness at the proper level, a hygienic shower with a mixer is simply necessary. The compact device takes up minimal space and allows you to practice intimate hygiene in suitable conditions. It can be installed next to the bidet, attached to the washbasin or hung on the wall in the toilet.

In this material we will consider the rating best models hygienic shower, popular among buyers. We will also talk about the features of choice, installation subtleties and rules of use. We will provide the presented material clear photos and videos.

1st place - Lemark Solo LM7165C

A built-in model with a brass body that can be installed next to a bidet or toilet.

An interesting feature of this hygienic shower is that the mixer is combined with a shower head holder. It is made of plastic and produces a narrow and fairly strong stream.

Main characteristics:

• model – built-in, for bidet;
• mixer - single lever;
• dimensions – 110x109 mm;
• coating – chrome-nickel.

The owners describe the device as very high quality, the body is durable and heavy. Faucets of this brand can last about ten years or even longer. The model is miniature, suitable for installation in a standard toilet.

It is better to combine installation with repairs in order to prepare the appropriate niche. But if the restroom already has a false panel behind the toilet to hide the communications, the easiest way is to install the Solo LM7165C on it.

2nd place - Oras Saga 3912F

A laconic model with a very simple design. For the watering can, the mount is placed on the wall, and the mixer is placed on the washbasin.

For this model, the mixer is installed horizontally. The spout and watering can are equipped with aerators. A one and a half meter hose is connected using a flexible connection. Uses a standard half-inch connection.

Main characteristics:

• model – for a sink;
• mixer - single lever;
• dimensions – 103x70 mm;
• mechanism – ceramic cartridge;
• coating - chrome.

Customers are generally happy with this model, although some feel it is too noisy. Perhaps it is not the original characteristics of the device that are to blame, but errors during its installation.

A hygienic shower like Saga 3912F would be appropriate in a combined bathroom where the sink is quite close to the toilet. For installation in a separate restroom, it is necessary to provide for the installation of a washbasin, which will become the basis for the mixer.

3rd place - Milardo Davis DAVSB00M08

Another model of a hygienic shower for installation on a sink. It is equipped with an elegant watering can and a wall holder for it.

Main characteristics:

• model – for a sink;
• mixer - single lever;
• dimensions – 131x141 mm;
• mechanism – ceramic cartridge;
• coating - chrome.

Buyers generally like this convenient and sleek device. If the need no longer exists, you can use the mixer without it. You will need a plug for the corresponding hole, which is not included in the kit. There is no need to specifically switch the water from the mixer to the shower; there is a button for this.

The device provides good pressure for both the faucet spout and the shower. It is placed on the sink in a combined bathroom, and the holder for the watering can can be mounted on a suitable vertical surface: on the wall of the room, on the washbasin cabinet, etc.

4th place - Grohe BauEdge 23757000

A beautiful faucet with a laconic design. The shower head is equipped with a convenient aerator.

Main characteristics:

• model – for a sink;
• mixer - single lever;
• dimensions – 146x132 mm;
• mechanism – ceramic cartridge;
• coating - chrome.

Buyers note the good quality and relatively simple installation of the device. During operation there are no complaints. Although some owners are unhappy with the situation when water drips from the spout. They note a fairly strong flow pressure obtained from the shower head.

Stylish and convenient model BauEdge 23757000 is suitable for a combined bathroom. The device looks beautiful in the interior.

5th place - WasserKRAFT Main 4108

A neat single-lever faucet with a traditional spout. The compact watering can is stored in a wall holder.

Main characteristics:

• model – for a sink;
• mixer - single lever;
• dimensions – 154x155 mm;
• mechanism – ceramic cartridge;
• coating - chrome.

The design of the product includes a check valve. The safe eco-mode of the cartridge ensures the most comfortable use of a hygienic shower. Many buyers praise this model for its reliability, convenience and stylish appearance.

The kit includes all the elements necessary for successful installation. But installing the device can be difficult because the connection points for the three hoses are located deep inside the housing.

A device like Main 4108 can be placed in a combined bathroom or in a toilet that has a wash area with a full-length or. In any case, the sink should be close to the toilet.

6th place - Grohe BauClassic 124434

A neat, hygienic shower equipped with a mixer that is installed on the bidet. A wall mount is provided for storing the watering can.

Main characteristics:

• model – for bidet;
• mixer - single lever;
• dimensions – 105x144 mm;
• mechanism – ceramic cartridge;
• coating - chrome.

The device is mounted vertically using standard half-inch connections. It is characterized as reliable and looks stylish.

The BauClassic 124434 model will be useful to bidet owners who need to expand the functionality of their device. In addition, using a watering can attached to a long hose will make it easier to clean the bowl during regular cleaning.

7th place - Grohe BauLoop 124895

A neat built-in model designed for a bidet. The stylish chrome-plated body will fit well into the interior of the bathroom.

Main characteristics:

• model – for bidet;
• mixer - single lever;
• dimensions – 105x144 mm;
• mechanism – ceramic cartridge;
• coating - chrome.

This hygienic shower is mounted vertically on standard half-inch connections. Buyers highly value the products of this brand because they are easy to install, reliable and easy to use.

Model BauLoop 124895 will be useful to owners of bidets and . The long hose allows you to conveniently place the watering can holder on a wall or other suitable horizontal surface.

8th place - Rossinka Silvermix X25-51

This is a relatively inexpensive model that is mounted on a vertical surface.

This option is compact in size, since the holder for the watering can is built directly into the mixer body. The eyeliner can be hidden behind a false panel or in a niche, so the device looks very laconic.

Main characteristics:

• model – wall-mounted, built-in;
• mixer - single lever;
• dimensions – 110x90 mm;
• mechanism – ceramic cartridge;
• coating - chrome.

Buyers generally rate this version of the hygienic shower highly, but note that it is not as reliable as its more expensive counterparts. Some encountered the fact that the watering can began to leak shortly after purchase, which is unacceptable, especially for a wall-mounted device.

The Silvermix X25-51 model can be wall mounted next to a bidet or with a regular toilet. It can significantly improve the hygiene of intimate areas.

9th place - Grohe BauCurve 123072

An interesting built-in model in which the mixer and shower head holder are separated. Suitable for installation on the wall near the bidet or toilet.

Main characteristics:

• mixer - single lever;
• dimensions – 105x144 mm;
• mechanism – ceramic cartridge;
• coating - chrome.

Convenient hygienic shower, for installation you will need two holes. The separation of the mixer and the holder allows you to vary the position of the device in the interior in a suitable way.

Buyers generally rate this not too cheap device highly. Such a reliable device that correct use and installation practically does not fail.

The BauCurve 123072 model can be used quite widely: in a separate restroom or combined bathroom. If desired, such a device can be installed on the wall in.

10th place - Rossinka Silvermix Y25-52

Single lever model, which is placed on vertical wall. The holder for the watering can in this version is built into the mixer.

Main characteristics:

• model – for bidet, built-in;
• mixer - single lever;
• dimensions – 235x155 mm;
• mechanism – ceramic cartridge;
• coating - chrome.

Compared to analogues, such a hygienic shower looks somewhat cumbersome, because the connections from two water supply pipes are installed separately on the wall, and a mixer is mounted to them. But due to the attachment of the watering can to the mixer body, the device still does not take up much space.

Buyers like the ability to conveniently regulate the water temperature of this model. But not everyone was able to easily cope with the installation of the device, since the thread pitch did not fit the existing communications.

The Silvermix Y25-52 model is convenient to mount on the wall next to the bidet or toilet. This a budget option, which fully corresponds to the declared functions.

How to choose the right model?

A hygienic shower equipped with a mixer differs in various parameters, but the main one is the type of installation.

This device is installed as follows:

• on the wall using open mounting;
• built-in option, hidden in the wall or behind a false panel;
• A faucet is mounted on the sink, to which a hose is connected.

A shower with a wall-mounted mixer is quite easy to install; it does not require major repairs, unlike built-in models. They put all the “stuffing” into the wall. All that remains outside is a simple faucet and a hose with a watering can.

A built-in version of a hygienic shower would be more than appropriate next to wall hung toilet. The “stuffing” of the device can be placed in the same niche as the cistern

It looks very aesthetically pleasing, but you will have to either build decorative panel, or carve a small niche in the wall. Both of these options are suitable for installation in a toilet. If the mixer for such a shower is placed on the washbasin, then this is more likely to be applicable in a combined bathroom.

Models in which the watering can holder is built into the mixer occupy less space and they are easier to install, but not everyone is comfortable using such a device

However, if the space of a separate restroom allows, you can install a corner or one in it, and attach a hygienic shower hose to it. This solution significantly expands the functionality of a hygienic shower.

In a separate sink, you can perform various operations that are inconvenient to perform in a kitchen sink or bathtub: wash shoes, a child’s potty, a pet’s litter box, etc.

Such a device can be used to perform various additional actions: wash the toilet bowl, clean shoes, rinse a dirty container, etc.

We should also consider a version of a hygienic shower equipped with a thermostat. On the one hand, this is extremely convenient, since you only need to select the temperature once so that the water is supplied to the watering can exactly as needed.

On the other hand, this is a full-fledged electrical appliance that needs to be placed in a room with high humidity. It is important to take all precautions. Such devices are expensive, and when operating the thermostat, energy costs will also increase slightly.

To supply water through a hygienic shower, a button or pedal is provided on the watering can. It is recommended to drain the water from the hose after use to protect the valve of this device from overload.

Next important point– price of the product. Inexpensive models usually short-lived and do not live up to expectations. However, if the device is installed correctly and used carefully, it can last for several years. Of course, it is better to take a product from a well-known brand.

This is especially true if a built-in model is selected. Dismantling and repairing in the event of a breakdown can be very expensive.

Before purchasing, you should inquire not only about the availability of warranties, but also about how to fulfill them. If there is no service center To perform repairs, warranty documents become practically useless.

Some owners of this useful device They were somewhat disappointed with the result, since not all their expectations were met. Very often this is due to the fact that the shower was installed incorrectly or the features of this device were not initially taken into account.

Shower head leakage is an inevitable occurrence, especially with budget models. When the faucet is open, the water flow is controlled only by a small button. With constant pressure, this knot weakens and water begins to leak out.

If the hygienic shower head begins to leak, you need to check the condition of the sealing element; perhaps it is installed incorrectly or requires replacement

To avoid this phenomenon for as long as possible, you just need to turn off the mixer every time. The impact on the valve of the watering can will be short-term, which will significantly increase its service life.

If the installation location is chosen incorrectly, using the hygienic shower will be inconvenient. The length of the hose is usually one and a half meters, but there are models in which the size of this element is only 120 cm. This difference can be significant, especially if the previous device is changed to new model with other characteristics.

Before installation, you need to think about how to use the device, understand how convenient it will be to open and close the mixer, remove and hang the watering can, etc. Some have found that a wall-mounted model works best attached to a vanity or cabinet cabinet near the toilet.

At the end of the procedures, a certain amount of water remains in the hose. It is best to drain it immediately, but not everyone remembers to do this. As a result, the water cools down and does not give the most pleasant sensation the next time you turn it on. It is recommended to drain the water from the hose and check its temperature before use.

Device installation features

When installing any hygienic shower, you should first turn off the water. All necessary elements usually sold with the product. You will need a regular plumbing tool, such as an adjustable wrench. It doesn't hurt to stock up on a bucket and a rag in case of an unexpected leak.

Models of hygienic shower, which are mounted with a mixer on the sink, are suitable for a combined bathroom; installing such a device is almost as easy as a regular mixer

In advance, you need to compare the diameter of the pipes to which the device will be connected and the supply hoses of the device. If the pipes do not correspond to each other (this rarely happens), you should stock up on eccentric adapters.

It is highly advisable to immediately install shut-off valves on the pipes leading to the device to facilitate dismantling and repair of the device in the future.

Usually the instructions describe in detail the work procedure.

To install a shower with mixer tap on a sink, you need to perform the following operations:

1. Connect the flexible hoses to the mixer by screwing them into the appropriate sockets.
2. Insert the sealing gasket into the groove on the bottom panel of the mixer.
3. Install the faucet on the sink, inserting it into the appropriate hole (or holes) flexible liner.
4. Secure the position of the mixer using a nut and a clamping ring.
5. Seal and connect the flexible hose and the corresponding water pipes.
6. Attach the wall holder.
7. Connect the shower hose to the mixer pipe and the watering can using sealing gaskets.
8. Carry out a test run of water and eliminate deficiencies if they are found.
9. Free the hose from any remaining water and place the watering can in the holder.

If leaks immediately appear after installation, the gaskets should be checked. Perhaps the element is skewed and just needs to be corrected. It also happened that inexperienced craftsmen simply forgot about this important “little detail”.

Hidden installation of such a device requires more attention, beginners do not often manage to complete work without flaws. These models are more demanding on the quality of installation, since eliminating the consequences of errors will not be so easy: you will have to dismantle the part of the wall behind which the connection point is hidden.

The work is carried out as follows:

1. Choose a place for all elements.
2. Bring the water supply pipes to the selected point; it may be necessary to groove them.
3. Make a niche in the wall, hang a box, prepare a false panel, etc.
4. Connect the flexible connection to the water supply.
5. Install the mixer and watering can holder if it is mounted separately.
6. Connect the mixer to hoses leading from the water supply.
7. Screw a hose with a shower head onto the mixer.
8. Check the tightness of all connections.
9. Perform a test run of water.

A hygienic shower is not a very complicated device. If the model is chosen and installed correctly, it will last long enough. It is worth giving preference to branded devices, and hiring professional plumbers for installation.

Tell us about how you chose a hygienic shower device to decorate your own bathroom. Share what was the decisive argument for you in favor of the model you purchased. Please leave comments in the block below, ask questions about controversial and unclear points in the article.

Choosing a mixer for a concealed hygienic shower or a wall-mounted model is quite simple. To do this, it is enough to familiarize yourself with the key design features of such showers and evaluate their advantages and disadvantages. But installing a hygienic shower on your own is already more difficult - but even here, guided by the tips given in the article, you can handle it.

Benefits of hygienic showers

Faucets with hygienic showers are gradually included in the list of equipment that, if not necessary, is highly desirable for installation in bathrooms. And if in private houses with spacious spaces there is enough space to install a full-fledged bidet, then in public buildings And small apartments There is no alternative to such a shower.

Such devices have a number of advantages:

1. Using a jet warm water intimate areas of the body are cleaned much more effectively after using the toilet than when using toilet paper.
2. The skin, and most importantly, the mucous membranes are not injured, since friction during cleaning will be minimal.

1. The impact of a stream of water from the shower can be regarded as a kind of massage that helps activate blood circulation in the pelvis.

According to statistics, those who use a hygienic shower instead of toilet paper on an ongoing basis are much less likely to experience diseases such as hemorrhoids, prostatitis, rectal erosion, etc.

1. Another advantage is the effective maintenance of the sanitary condition of the restroom. A stream of water from the shower immediately flushes all the impurities into the toilet, so you can dispense with the bucket of “fragrant” used paper.

1. Finally, hygienic showers with mixer taps are convenient from a utilitarian point of view. A sufficiently long elastic hose allows you to effectively wash your plumbing fixtures. In addition, this design is great for washing children's potties, cat litter boxes, floor buckets, etc.

Well, the main advantage is that both the wall-mounted and, especially, the built-in hygienic shower have very compact dimensions. Thanks to this, it can fit even in the most compact bathroom, where there is only room for a toilet. This is how such products compare favorably with classic bidets.

Design Features

Types of hygiene devices

To treat intimate parts of the body after bowel movements, devices are used. different types. Each of them has its own characteristics, so in this section I will only give brief description main groups:

Type	Peculiarities
Shower toilet	The most complex and expensive design. In fact, it is a hybrid of a traditional toilet and a bidet. For a hygienic shower, a special nozzle is used, which is built into the bowl.
A compromise option for those who do not want to completely change the toilet, but only expand its functionality. It is a cover to which hoses with cold and hot water. Inside the lid there is a special nozzle, which is used during hygiene procedures. The disadvantage of this solution is the high price, as well as the fact that you cannot find a lid for every toilet model.
Shower Hose for Sink Faucet	If the toilet has a sink, then instead of a standard faucet, you can install a model with a long (1 m or more) hose. Thanks to the presence of such a hose, you can use water from the sink to perform hygiene procedures. True, this solution is largely a compromise, since using such a system on an ongoing basis is not so convenient. But as additional option- has a right to exist.
Separate mixer with shower hose	From my point of view - the most effective and convenient solution. The basis is a built-in or wall-mounted mixer to which a hose is connected. A shower nozzle is attached to the end of the hose, which is used for hygienic treatment.

It is the last option, described in the table, that is the most common. So in the future I will analyze it.

Essential elements

A hygienic shower installed in toilets consists of several basic elements:

1. The central part of the structure is the mixer, used to regulate water supply and select its temperature. The reliability of the entire system directly depends on the choice of mixer, so a separate subsection will be given to the description of this part.

1. Shower hose – flexible tube connecting the mixer to the shower head. The optimal length of the hose for a hygienic shower is from 1.2 to 2 m. This part can be made of either plastic or rubber with a decorative braid. Polymer models are more durable, but they have less fracture resistance, so you need to use such hoses carefully.

1. Shower fittings - various hooks and clips, which are placed on the wall near. Can be made from bronze, brass or steel with decorative coating, protecting against corrosion. Silumin clamps are usually supplied with showers from the economy segment, but their service life is limited due to their low strength.

Sometimes the bracket is combined with a pipe for connecting a hose. In this case, it is installed simultaneously with the water supply system and connected to the mixer.

1. Shower head– attached to the end of the hose, ensures spraying of water flow. They differ not only in design, but also in functionality. The most useful functions are switching the flow (from stream to small drops) and adjusting the pressure directly on the nozzle. It is highly advisable to purchase models that can be turned on with the same hand with which you hold the watering can - it’s very convenient!

Faucet types

The mixer, as I mentioned earlier, is used to regulate the pressure and temperature of the water flowing from the water supply into the hygienic shower head.

Today the following types of mixers are used:

1. Two-valve– the cheapest, easy to install and maintain. In essence, they are a pair of valves with rotary axle boxes, respectively connected to pipelines with hot and cold water. The selection of the optimal water temperature is carried out by alternately rotating the flywheels on the taps, but with pressure changes in the system, the temperature can change unpredictably.

1. Single lever– make up the bulk of mixers for this category of plumbing equipment. Here you can find both an external hygienic shower with a mixer and a model for hidden installation, in which only the handle for adjusting the pressure and temperature is visible on the wall.
   The central element of such a mixer is either a cartridge or a ceramic axle box connected to the water supply pipes. Single-lever models are more expensive and more difficult to install, but are much more convenient to use.

Sometimes catalogs do not indicate the type of locking element. In this case, we pay attention to the product code and then look for the characteristics of this particular model on the manufacturer’s website. The information obtained will be useful both when choosing a product and when searching for parts needed for replacement in the event of a breakdown.

1. Mixer thermostats– the most modern products. There is a thermostatic element inside the device, thanks to which the outlet water temperature is always maintained at the same level. This contributes to the maximum level of comfort in use, but such a mixer, alas, is quite expensive.
   Unfortunately, finding a high-quality hidden thermostat is not easy, so you will have to put up with the presence of the mixer body on the wall.

If you choose by optimal ratio“price-functionality”, then it seems to me best choice installation of a single-lever model built-in or wall-mounted. On the one hand, you can find models with a very reasonable cost and install them yourself. On the other hand, the presence of an adjustment system makes it easy to configure optimal temperature and water pressure.

Self-installation

Stage 1. Preparatory work

One of the advantages of hygienic showers is their fairly simple installation technology. You can install the product yourself, without involving specialists. Naturally, it is necessary to observe a certain degree of accuracy, acting strictly according to the instructions.

The installation process itself depends on which model you will install, as well as on the condition of the room itself. To install wall-mounted and built-in faucets with a hose, it is necessary to groove the walls for laying pipes. But a hygienic shower can be placed on the sink even after finishing work is completed.

Gating can be abandoned if the walls are covered with plastic, gypsum board or other materials with sufficient moisture resistance. This way the installation process will be less labor-intensive, but the pipes will still have to be fixed to the walls.

The preparatory stage includes the following operations:

1. First we choose a place on which the mixer will be installed. It is desirable that a person can reach the lever or valves without getting up from the toilet.
2. Now we apply markings on the walls for laying pipes. As a rule, pipes with hot and cold water rise vertically to the mixer, but here everything depends on the initial configuration of the water supply system.

1. Now let's start building the walls. First, select a hole with a depth of 85 - 100 mm for installing the mixer body. Then we bring grooves for pipes to this hole. We clean the grooves cut or hollowed out with a hammer drill from fragments of concrete/brick and dust.

1. We install a mounting box in the hole under the mixer. We fix the box either with spacers or using cement mortar.

The mounting box may not be included in the mixer kit - then you will have to purchase it separately. Also allowed hidden installation without installing a box: in this case, the mixer is fixed directly in the wall niche.

1. Laying pipes, bringing them to the hole in the wall in which the mixer will be installed.

1. If you plan to install wall model or devices with a thermostat, you won’t have to bother with the hole and installing the box. Instead, pipes are brought to the surface, fixed in such a way that they are located exactly opposite the holes for connecting the mixer.

Stage 2. Installation of the mixer and other shower elements

The instructions for installing a hygienic shower will also differ.

So, when working with the built-in model, we proceed like this:

1. We install the mixer mechanism in the box or wall niche.

1. We connect hoses to it, connected to water pipes(hot and cold water).
2. A faceplate may need to be installed, to which the outer part with a lever or flywheel will later be attached.
3. After installation is completed, we seal the grooves and carry out finishing work.

1. On top finishing wall install decorative overlay , and then we attach the flywheel/lever to control the water pressure and temperature to the axle box or cartridge lever.

Installing a wall-mounted model will be much easier:

1. We connect the pipes on the mixer body to the water supply terminals mounted on the wall..
2. Fixing the product using nuts with sealing gaskets, trying to tighten them tightly, but without deformation.
3. When using a model with a thermostat, check the functionality of the thermostatic element.

With the model for the sink, everything is quite simple: just fix the faucet body on the sink itself and connect the hot and cold water supply hoses to it from below.

Now we just have to perform the final operations:

1. In a selected location, one or two anchor bolts attach the clamp for the shower head. If you need to install the mount on a tiled wall, use a special tile drill.
2. Attach a shower hose to the threaded pipe on the mixer. Check the tightness of the connection.
3. We apply pressure and control the absence of leaks. Also at this stage it is worth checking how well the pressure and temperature are regulated, as well as whether the water on/off lever on the shower head functions reliably.
4. After this we hang the watering can on installed mount . You can use the hygienic shower!

Conclusion

The technology for installing a hygienic shower described above can be used for almost any model of such devices. To understand the nuances, it is worth studying the instructions from the manufacturer and watching the informative video in this article.

If you still have questions after this, you can ask them in the comments.

During the renovation process, property owners try to give the bathroom as much functionality as possible. For this purpose, in addition to the toilet, they install a bidet for convenient hygiene procedures. If the bathroom is small, then there may simply not be room for this. If you are faced with just such a situation, then installing a combined plumbing fixture may be a way out of it. An addition is a hygienic shower for the toilet with a mixer, which takes up virtually no space and brings enormous benefits.

A modern hygienic shower is a simplified version of the well-known bidet, combining the functions of two plumbing fixtures. Its use is especially relevant in separate bathrooms, since there is no need to visit several rooms one after another.

The device consists of the following components:

1. Mixer with control valve. IN quality models There is an additional push button to turn on the water.
2. Flexible hose with watering can. The shape and dimensions of the watering can are ergonomic enough for ease of use. The nozzles have a direction that ensures the movement of water jets directly in front of them, eliminating their spraying to the sides.
3. Watering can holder. It is usually mounted on the wall next to the mixer so that it can be easily reached by hand. The shower head is inserted into the holder.
4. Thermostat (certain models). It allows you to adjust the temperature of the incoming water. Once you set the thermostat to a certain temperature, you don’t have to make any further adjustments. The thermostat is installed on more expensive models.

All elements of the shower are chrome-plated, and the flexible hose is covered on the outside with chrome braid.

Tip: Choose a shower model that has an additional water start button on the shower head. This device is more convenient and safe to use. You will not need to open and close the mixer valve, which is not always convenient.

Benefits of a shower for a toilet

We list the advantages of a hygienic shower for a toilet with a mixer:

Read about how to make it in a separate material on the site.

Do-it-yourself installation of this type of hygienic shower in a toilet is carried out in the following sequence:

• the old lid is removed from the toilet, and a bidet lid is attached in its place;
• the water in the system is shut off;
• the tank is completely drained;
• the supply hose is unscrewed, through which water flows into the tank;
• A tee is installed between the water pipe and the tank. One end of the tee goes into the tank, and the second is connected to the toilet lid;
• If the device is controlled by an electric drive, then it is connected to a specially designed socket for this purpose.

When buying a hygienic shower for a toilet, try to focus not only on the price, but also on famous manufacturers, which specialize in the production of such accessories. Thus, you will provide yourself with high-quality equipment, the purchase of which you will not regret.

Hygienic shower in the toilet photo

Here are several photos on the topic of our article.