Which heater is better, oil or converter? Convector or oil heater - which is better?

Cold. The rooms are large, the radiators are small, an assistant is urgently needed. The solution is to buy a heater.
Store salespeople offer two popular options: convector heaters or oil heaters.

How do these mechanisms work and what are their differences? How profitable is it to install them in the house?
To quickly understand and make a choice, we recommend comparing the main characteristics of both options.

Classic oil heaters

Small mobile batteries that run on mineral oil. The liquid is placed in a metal reservoir, which is hidden inside the structure.

The case is equipped with small wheels and a handle that make it easy to move the system. There is also a convenient reservoir for the cord.

How the fireplace works

The heater has a heating element, which begins to heat up immediately after connecting to the network. The hot heating element heats the oil, and it, in turn, transfers heat to the body. Using the regulator you can set any temperature.

If the ceiling height in the room is less than three meters, a heater with a power of 1 kilowatt is enough to heat ten square meters.

The heat pump works with electrical consumers. If we were to put the principle in which a heat pump operates, it would be the form: 75% 25% soil energy with electric lease = 100% thermal energy. According to research, it seems that the best heat pump would be a water-to-water heat pump that extracts energy from water, mostly from a pond, and introduces it into the house. Under these conditions, the initial investment is fully restored after 5-10 years. Unfortunately, in order to take advantage of this type of pump, you must live near water.

Thus, the most common pump remains the geothermal pump. His technical description quite difficult, but first important element are the loops of the collection. They are made of high-density polyethylene and can be installed horizontally or vertically. Select for horizontal installation, if you have a large landscape. Vertical is used when the ground has dimensions.

Convectors

A convector heater is slightly smaller in size than an oil heater. The body is thin and smooth. On the back side there are special fasteners with which the fireplace can be mounted on the wall.

If necessary, you can leave it on the floor; for this purpose there are small legs with wheels (they are unscrewed when mounted on the wall).

It consists of a housing (convection chamber) and a small heating element built inside. No fans or anything else additional elements there is no. The system is very simple, so it rarely breaks down.

How does it work?

Unlike an oil heater, a convector heater practically does not radiate heat, with the exception of the front part of the body. Here the operating principle is slightly different. The air in the room is heated due to the constant exchange of hot and cold masses. A natural process of convection occurs.

During operation, cold air comes in, passes through the heating element and comes out already warm. Meanwhile, a new portion enters the heater, and so on continuously.

Since hot air is lighter, it rises, while cold air, on the contrary, sinks to the floor. Thanks to the continuous flow of these masses, the heat is evenly distributed throughout the room.

Each heater has both pros and cons; they can be determined by comparison.

Oil heater versus convector: which is better?

And yet, which is better: a convector or oil heater?

Having assessed the pros and cons of each option, we can safely say that the convector wins. It is more convenient to use, consumes less electricity and heats the room much better. The only negative is that it costs more.

When the boiler boiler control command is given by the ambient thermostat or boiler temperature sensor, this stored heat is sent to the radiators or boiler even before the pellets are automatically re-ignited. Thus, the following is realized: - dry combustion; - There is no smoke in the flue gas; - No resin residue. The temperature setting is returned to the user, but other settings are made at the factory and cannot be changed.

In addition, the boiler's standard equipment also includes a proto-stoker, which functions to protect the boiler in the event of a circuit failure. The boiler operates with forced draft, and the exhaust gases are manufactured with an inlet outlet kit identical gas boilers. In addition, we have begun developing highly efficient and economical solutions for industrial consumers. Heating the radiant tube is the most effective option for large areas, since heating objects are obtained, faces in the infrared coverage zone transmitted by radiant pipes, identical to the heat generated sun rays, not a huge volume of air.

note: No heater burns oxygen. The only thing they do is dry the air. A regular humidifier will help combat this problem.

You will find an article on how to choose a humidifier.

Much also depends on the model of the heater.

The more expensive the fireplace, the more functions it has and the safer it is.

Comparison table:

When choosing, be sure to take into account your personal wishes.

And don’t forget to calculate the square meters before purchasing. Even the most best heater will be powerless if placed in a room that is too large.

Without any doubt we can say that among alternative sources For heat, the most popular are electric convectors and oil heaters. This kind of heaters will heat your room in case of problems with individual or central heating. However, how to choose between these two rivals? or convector: which is better? It is this issue that we will try to understand in this article. There are many important nuances that need to be taken into account.

Oil heaters

Let's start with heaters that have a lower cost. Before we talk about whether an oil heater or a convector is better, let's look at the device itself. The advantages of this heating device a whole mass. One of them is simple installation. You do not need any special training to correct installation unit. In practice, electrical problems with the device are unlikely due to its simple design.

As for the structure of the oil radiator, it looks like this: there is a metal radiator housing, which is filled with mineral oil. Most models do not have a special valve for draining the oil, this is due to the fact that it does not evaporate. The coolant contains a heating element. There is a rheostat that allows you to regulate the temperature, and the device is protected from overload. Modern units have a sensor that turns off the device in case of horizontal deviation. This technology is called “rollover protection”. Well, now let’s go further and consider the main advantages and disadvantages of the device.

Strengths and weaknesses of oil heaters

Let's start by looking at the functionality of aggregates. Best buy modern model which will provide you reliable protection. For example, to install the device in a children's room, it must be equipped with a special casing. In this case, the temperature of the case will not exceed 60 degrees, and you will not get burned on it. A serious advantage is the presence of a thermostat. This device will automatically adjust the room temperature to the optimal one. In addition, the presence of a timer will allow you to turn it on and off when it suits you.

If we go directly to the features, then the oil heater has the following pros and cons. Among the advantages it is worth noting extremely quiet work. If there is no fan, you are unlikely to be disturbed by a silent device. In addition, the cost of such heaters is not very high, and almost everyone can afford it. You can move the heater from room to room or hang it on the wall, if there are mounts. Among the disadvantages, it is worth highlighting the possibility of oil leakage due to mechanical damage. In this case, it is easier to buy a new radiator than to repair an old one.

Oil heater: consumer reviews

You can't help but touch on this important aspect, as customer responses. The fact is that such a useful and important information, and even free, can only be obtained from consumer experience. Many people write that it is better to buy a radiator with a fan. This is due to the fact that heated air spreads throughout the room much faster. In this case, the noise increases slightly, but the fan can be turned off if necessary.

Users say that it is better to give preference to trusted manufacturers. The best are Ariston, Electrolux, etc. Another significant advantage is the ability to easily and quickly move from room to room. As noted above, radiators of this type are not very expensive, but there is a slight limitation in the form of power. As a rule, it is very problematic to warm up a room that is more than 25 square meters in area. This is due to the fact that most manufacturers do not produce devices more powerful than 2.5 kW. A good oil heater will have positive reviews. If we talk about Chinese fakes, they are not worthy of attention.

Electric convectors

The body of such heaters is almost always flat and smooth, which is what actually distinguishes it from oil heaters. If the latter are in most cases placed on the floor and rarely attached to the wall, then in the case of electric convectors there are no restrictions. They are completely silent and very comfortable. If necessary, you can attach it to the wall, and if necessary, remove it and install it on legs.

You are probably familiar with the operating principle of an electric convector. It consists in the fact that cold air enters it and hot air comes out. As a result, heated air rises, while cold air remains below. If everything works properly, then convection flows are established, which ensures optimal temperature in room. Well, now let's go further and look at something else interesting.

Strengths and weaknesses of the convector

Without a doubt, it makes sense to consider the advantages and disadvantages of this type alternative heating and understand whether it is superior to oil heaters or not. The main advantage is that all models do not heat the body by more than 50-60 degrees. This means that the air in the room is not dried out and oxygen is not burned out. Although the last point is very controversial. If you nevertheless notice that the air in the room has become dry, you can always install a container of water, which will evaporate upon contact with the radiator of the device. This is a kind of stationary humidifier.

The presence of a thermostat also plays into our hands. This is due to the fact that in this way you can significantly save energy. After heating to the required temperature, the device will switch to temperature maintenance mode, working more economically. Of course, in order to understand which is better: an oil heater or this is not enough. So let's make some small comparisons that will dot the i's.

Dimensions and methods of placing heaters

In most cases, an electric convector weighs no more than 12 kg. This is due to the lack of liquid inside the radiator. Oil-based appliances weigh up to 25 kilograms. This means that the convector will have smaller dimensions, and it will be easier for elderly people or children to move it.

The flat body of the convector allows it to be placed where an oil heater would not be. For example, you can install it on the wall, mount it in a small niche or even on the floor. But today there are also oil radiators whose body width is not much larger, and they have special wall mountings. For this simple reason, the devices do not differ much in this regard.

Electricity consumption and comfort of use

If we consider the process of heating the oil radiator, it proceeds approximately as follows. First, the heating element heats up, then the oil, and only after that the housing. Then the air warms up. In the case of a convector, everything is somewhat faster. This is due to the lack of fluid. After a heating element reaches operating temperature, it immediately warms up the air, and the built-in fan will make it spread even faster. From all of the above, we can draw a simple conclusion that the convector in terms of energy consumption is approximately 15-25% more economical. However, it is worth remembering that it also cools quickly.

The uniformity of air heating of oil radiators is somewhat less than that of convectors. This is due to the lack of flow circulation. Therefore we can say that electric convectors somewhat more successful in this regard. Now let's move on.

Safety and service life

If you are asking yourself whether an oil heater or a thermal convector is what to choose, then you need to understand the issue of safety. Devices that have a protective casing and do not have a protective casing heat up significantly when operating at full power. Therefore, it is not recommended to place them in close proximity to walls or furniture. But the convector body almost never heats up above 60 degrees, so they can be installed almost anywhere.

Often the choice of heater depends on its service life. Oil radiators usually work for 5-7 years, in some cases up to 10 years. Electric convectors usually last about 15 years if safety rules are followed. The conclusion can be made simple - it is better to buy a convector.

Oil heater or convector - which is better: consumer reviews

You definitely need to pay attention to what the owners of both equipment write. According to many, the control of heaters is equal, but the cost of devices using mineral oil is 20-30% less, which is a significant advantage. At the same time, it is noted that convectors with air purification are more preferable for indoor use, as they improve its climate. If such a function is absent, then there is no significant difference in terms of environmental friendliness. Based on all of the above, we can conclude that both some and other types of heaters are good.

Conclusion

So we have dealt with the question that interests us. Oil heater or convector - which is better? It is impossible to give a definite answer. It’s easy to take and compare, then more benefits at convectors. But if you don’t have free money, you can buy an oil heater, as it is much cheaper. The safety level of convectors is higher, so they are more preferable in rooms where there are children or animals. Agree, in any case, the fall of a device weighing 25 kg will have more dire consequences than the fall of a 10 kg convector. That, in principle, is all that can be said on this topic. In most respects, the convector wins, but in some cases you can give preference to oil heaters.