Order a base for a bed of non-standard sizes. Making beds to order

“Our life is a sheet and a bed,” it’s hard to argue with this line from Sergei Yesenin’s poem. We spend a considerable part of our lives sleeping, and our well-being, mood and health depend on the quality of rest. One of the main conditions good night- the right bed. If you have a non-standard project, use the service of making custom beds.

It's hard to argue with that. We spend a third of our lives sleeping. And our well-being is largely determined by the quality of our rest. Main condition healthy sleep- the right bed. Pay attention to the size and shape of the base, transformation mechanisms and functionality, and orthopedic properties of the mattress. Last but not least, the design. The bed is the center of the bedroom, the main element of the interior. The overall mood of the room depends on its aesthetic qualities.

The reasons may be different: the unusual geometry of the room, the need to arrange sleeping places for children, furnishing an individual hotel project, or simply not wanting to have standard serial furniture. Making beds to order involves any changes in the design of the product, from design to the height of the back or legs.

Making beds to order in Moscow is one of the directions furniture factory OTTO STELLE. When ordering, you can specify the size and shape of the base, orthopedic properties, design features project, the presence of drawers for linen and a lifting mechanism. Our designers will help you with the choice of materials to bring your idea to life.

How to place an individual order?

Decide on the basis. We use solid wood frames as the base. valuable species wood, plywood or MDF. The likelihood of deflection and breakage in such structures is practically absent.
Choose a mattress. The most popular are mattresses without springs or with independent spring blocks. In the first case, fillers from environmentally friendly materials: holofiber, latex, coconut milk and orthopedic foam. In the second case, there are springs inside the mattress, placed in special fabric covers. Due to them, the load on the spine is noticeably reduced.
Evaluate alternative options. For hotel rooms you can order two-layer construction- box spring. The bottom layer consists of solid wood and plywood, the top layer is the mattress itself. These beds are easy to move and transform two single beds into double beds. They have gained popularity due to their durability, low cost and individual design.

Consider the design of the headboard. This is one of the most important details bedroom interior, on which the overall concept and decor of the room as a whole depends. The OTTO STELLE company can produce a custom-made bed with a headboard without screeds, with a rectangular or carriage screed. Leather, suede, jacquard, velor, etc. are used as upholstery materials.
Calculate bed dimensions. Our specialists will fulfill your wishes regarding dimensions with high precision. sleeping place. You can choose any option to choose from: compact or large; single or double; rectangular, round or unusually shaped beds.
Choose your favorite design. We always welcome unexpected ideas, fresh views on everyday things. When producing beds, we involve famous designers, we make any dreams come true. Want to original finish headboards in the old Russian style? Need a crib in the shape of a ship? The client’s desire is the law, we are ready to select ready-made elements from the catalog or create an exclusive project.

Entrust the production of beds and other custom-made furniture to the specialists of the OTTO STELLE factory; to do this, contact our manager in Moscow. Our masters offer big choice ready-made options, are engaged in assembly based on photographs and sketches of clients, and test products in the Italian CATAS laboratory. We are always waiting for you in our showroom, where you can appreciate the elegance and quality of our furniture with your own eyes.

When do people make custom beds? Only when they are not satisfied with what the stores offer. The main reason: the need to keep within the dimensions. Are you fighting for every centimeter? A custom bed is a solution that will help!

Do you like beds from Europe and America?
Order a similar one! The style will remain the same, but the price will be lower and the base will be stronger. You will not only win much-needed centimeters, you will also save up to half its cost!

Of course, beds are different. Some people need one thing, and some need another. You like soft fabric? What about touching the skin? All those nails and folds that catch your eye?

Yes to us! When, looking at the fabric, you already see the result - it’s inspiring! You understand how the thread will look in the stitch and you know how the button will behave.

Our beds are primarily fabric, leather and a large storage box. Looking for a bed in soft upholstery? Order from us! We make beautiful and strong beds at reasonable prices. And, what’s important, in the dimensions you need!

In short, our beds differ in size, reliability and weight. We are sure that heavy weight is our big plus! A heavy object retains inertia better, which means the bed will not sway and move on the floor. The beds come with different orthopedic bases. We offer a choice: from cheap ones with wide slats to bases in the “Luxury” version, with additional rubber shock absorbers. At the customer's request, the beds are equipped with a lifting mechanism and a reinforced drawer bottom.

We offer

We are for strength and long service! Do you agree with our approach? It's great when the customer is on the same wavelength with us! Of course, it would be nice to make a bed for twenty to twenty-five thousand. Take into account the limitations and choose better materials. Is it possible? I would really like to! But quality requires time, money and qualifications. Over the years you understand that everything has its price. We get what we pay for. It’s hardly worth counting on something reliable when you’re saving on every screw.

Decide what is more important to you: a low price or a high-quality item. If you want, without trying too hard, you can find a bed for less than 10,000 rubles. Factories in the "economy" segment make beds in abundance and at a low price. The main advantage of these beds is that they are cheap and their service life lasts for the warranty period. This is often a plus. Everyone chooses their own priorities. There's no point in buying good bed, living in a rented apartment. A cheap resource is quite enough.

A custom-made product always “falls out” from the general list. It is unlikely that a bed made “to last” and taking into account your wishes will meet your expectations at a low price. We are, of course, talking about professional work. We are not trying to compete with the conveyor belt of cheap beds for twenty to thirty thousand rubles. For a small workshop this is pointless. We make beds to order according to individual measurements.

We are sure that all the best is made to order! This is a different approach to the customer and a different result. It is unlikely that we will make a bed cheaper than stock, but it will definitely be better. Our beds are many times stronger and much more reliable. And at the same time - taking into account your limitations. Whatever one may say, but most often it is decided difficult task Only an individual approach helps.

Beds from our customers

A custom-made bed is always a solution to some problem. Besides, of course, the main one - to serve as a place to sleep. Some people have little space, but want to sleep on a bed and not on a sofa. Some will place a bed and nightstands in the limited space of a small room. Someone wants a set of bed and wall panels in one upholstery. And someone wants to get an analogue of an expensive bed for less money. A few examples of what our customers received by trusting us.

Lelievre

A beautiful bed with a laconic design. Upholstered straight from France. We solved several problems. The main ones are to reduce production time and get a bed in the desired fabric. The fabric is really gorgeous. Among other things, the composition is cotton and acrylic. A meter of fabric weighs more than a kilogram.

The seemingly simple design of the bed hides pitfalls. High legs “eat up” part of the sides and can make the bed wobbly. We increased the rigidity of the frame by using 45mm plywood. Each drawer weighs about 30 kilograms. Even without a mattress, the result was a heavy structure with a large supply of inertia.

Customers like it when the joint of the side panels is hidden under the upholstery. And I like to sleep on wide mattresses. To save on delivery, the beds are made collapsible. Therefore, a junction is inevitable. The most practical way to make the joint invisible is to use a Velcro cover for the sides. In most projects we do exactly this.

Fabric with a pattern is always more interesting. But the design requires more fabric and more skill in the work. At first glance, a simple task is to select and combine the pattern on the corner. In fact, there are a lot of nuances. However, as always. Not every seamstress can do this. We can do it. ☺

Beds for children

Two beds for two brothers, Kirill and Alexander. The children are ten and twelve years old. The age is small, so the guys still have common room. But the house is big, there is enough space. Later, each of them will have their own room.

The main task was to get the beds with the right upholstery. It was not possible to find ready-made ones. Therefore, we decided to make the beds to order. By ordering a custom-made bed, you get what you need. Instead of choosing from what the factory has to offer.

Beds have a headboard and a footboard. The sides do not fit together. Therefore, there is no point in making a cover with Velcro. We upholstered the drawers in the workshop and brought them to the site completely ready for assembly.

The base is an important part of the bed. Essentially, this is a bed. The base determines how comfortable you will be and how long the mattress on which you will sleep will last. Most often in our beds we use the bases “Letto de Lux” from the Russian factory Via Ferrata. These are improved versions of bases with narrow slats. They have additional rubber shock absorbers made in Belgium. Made for mattresses with a large number of springs. Each spring has its own support.

Final assembly in the workshop. Before sending the beds to the customer, everything needs to be checked. There is no need for surprises at the site. We prefer to make sure everything is in order.

Bed 205cm wide

It's nice to sleep on a wide bed. But, unfortunately, it happens that there is enough space for a mattress, but no longer for a bed. Ekaterina designer. Our customer with "experience". I came across just such a situation.

There are switches and sockets on the sides of the bed. There used to be another bed here. In a different design and with a mattress of a different width. At cosmetic repairs The customers decided to replace the bed with a wider one. We were faced with the fact that the new bed was blocking one of the switches. Moving electrical points in an already renovated room is difficult and dusty. I would have to paint the whole wall again. Therefore, the main task was to leave the new mattress and fit the bed between the switches.

On the one hand, making a bed of the required width is not difficult. The sides will just be thinner. On the other hand, it will weaken the structure of the bed. There will be no required strength. But strength is needed. The headboard alone weighed about 40 kilograms. And taking into account the weight of the mattress and the people sleeping on it, the sides must withstand a load of more than 300 kg.

For each bed we draw a model. This good way agree on proportions and dimensions.

The color breakdown is for the convenience of our employees. Each material has its own color. More chances to avoid mistakes and rework.

The solution to the problem was to divide the bed into two components. Separate base with mattress. Separate strapping. We separated the headboard, footboard and drawers from the base. Thus, the load on the sidewalls was reduced from three hundred to one hundred kilograms. And with such weight they can cope with the reserve.

Each project has its own budget. Everyone is counting money. The originally intended nails had to be replaced with imitation ones. Individual nails look cool, but cost more. The tape molding we offer costs three times less. To stay within the budget, Catherine chose her.

How much does it cost to make a custom bed?

As always, it all depends on what the customer wants to receive. As we said above, our beds are reliable and durable. These are our priorities. It would be wrong to say that our beds are cheap. And it’s unlikely that you can create a good thing if you save on everything. The fact remains: the quality of components and the qualifications of the craftsmen have their price.

How much can a custom bed cost? A question that is difficult to answer quickly. After all, we need to understand what you want to receive. Usually we divide the bed into 2 parts: the base and the headboard. Let’s agree to consider the bed itself as the “base”, without the headboard.

In most cases, the cost of the base ranges from 35,000 rubles to 55,000 rubles. The difference in price depends on the cost of the upholstery material, the width of the mattress, the thickness of the sides and several other options. If we talk about the headboard, then, again, in most cases, the price will be in the range from 20,000 rubles to 30,000 rubles. The cost is affected by height and design.

The calculator below will help you get an idea of our workshop prices.

Base:

Mattress width: 80cm 90cm 100cm 110cm 120cm 130cm 140cm 150cm 160cm 170cm 180cm 190cm 200cm 210cm 220cm 230cm 240cm

Base Wide lamellas Narrow lamellas Narrow lamellas Luxury

Sidewall thickness: 4cm 6cm 8cm 10cm 12cm 14cm 16cm 20cm

MDF legs H40mm Solid beech H40mm Solid beech H60mm Solid beech H80mm Solid beech H100mm Solid beech H120mm Solid beech H140mm

Lifting mechanism

Velcro cover

Headboard:

Width 90cm 100cm 110cm 120cm 130cm 140cm 150cm 160cm 170cm 180cm 190cm 200cm 210cm 220cm 230cm 240cm 250cm 260cm 270cm 280cm 290cm 300cm 310cm 320cm 33 0cm 340cm 350cm

Height 90cm 100cm 110cm 120cm 130cm 140cm 150cm

Design Box Rectangles Alexander Redcliffe Cavendish Grosvenor Belgrave Finsbury Cleveland Portman Berkeley Ecclection York Hanover Russell Sloane Bonn Regent Memory Prada

Kant

Cutout for skirting board

Main part Smooth 2-5 buttons 2-5 rhinestones 6-10 buttons 6-10 rhinestones 11-20 buttons 11-20 rhinestones carriage tie with buttons carriage tie with rhinestones 2-4 stitches 5-8 stitches 9-12 stitches 13-20 stitches

Headboard perimeter finishing

Finishing inside edging No need Fabric cord Decorative twisted cord Imitation nails Nails, head to head Nails, every 3cm Large nails, every 3cm

Upholstery:

Kiton Tesla Santorini Amara mystic

What do we make beds from?

To make a good bed, you need good materials. We work with FK brand birch plywood. Almost all parts are made from this material. Plywood is very strong. Capable of withstanding enormous loads without breaking. For example, we make the sides of the bed from 30mm thick plywood. This strength is enough to safely say that such a bed will last for decades.

You may know - there are several brands of plywood, for example, FSF, FK, FBK (aviation) and others. Each for its own purposes. It just so happens that the most affordable brands are FC and FSF. FSF plywood is easy to use due to its dimensions. Sheet size 244x122cm. With these dimensions, it is very convenient to make the sides of the bed; they fit into the length of the sheet.

Comfortable. BUT YOU CAN'T!!!

In the production of FSF plywood, phenol-formaldehyde resins are used for gluing veneer. And this is very bad for the bedroom!!!

Our choice is FK brand plywood. It is environmentally friendly and, importantly, is relatively cheap. Unfortunately, this brand of plywood is produced only in sizes 152x152cm. As you understand, the side of the bed no longer fits within the dimensions of the sheet. We get around this limitation by gluing “overlapping” two parts made of 15mm thick plywood. The adhesive joint is reinforced with powerful industrial staples. Thus we get the strongest foundation. Let us clarify: such a sidewall will withstand the weight of a passenger car without breaking.

We use modern and technologically advanced bases in our beds. It is possible to manufacture bases and non-standard sizes. For example, you need a base for a children's bed measuring 126x83cm. We'll do this. Or you need a base 116cm long. Let's do this too! When designing a bed, the springs of the mattress are taken into account. Different springs have different lamellas. Narrow - for springless mattresses and for mattresses with a high spring density. Wide - for mattresses with traditional 108 Bonnel springs per square meter.

Each customer chooses a mattress based on personal characteristics. Mattresses differ from each other in size, thickness and base material: density of polyurethane foam, presence/absence of springs, number of springs per square meter. Sometimes these mattresses are quite light, sometimes they are very heavy - up to fifty kilograms. Each weight requires its own mechanism power. A low-power elevator will not lift a heavy mattress. He simply doesn't have the strength. And vice versa - a powerful lift for a light mattress will be “overkill”. You simply won't be able to lower the bed. We have elevators of different capacities at our disposal. For each mattress the mechanism is selected individually.

Another feature of our beds is the bottom of the storage box. We make it from 10mm thick MDF. This is much stronger than the factory offerings. For comparison, in economy-level beds it is used fiberboard board 3mm thick. If you don’t know, fiberboard is a very thick cardboard.

How we solve problems

Unfortunately, it is impossible to be able to do everything. Therefore, we focused on working with fabric and leather. The workshop’s capabilities have been expanded by collaboration with experienced professionals working in other fields. Modern furniture production is technological and requires a large fleet of machines and equipment. As we said above, a custom-made bed is always a solution to a specific problem. For example, for this “floating” bed we attracted partners.

If you want the mattress to last for a long time, it is better to provide the possibility of ventilation. The bases with slats have enough free space for air. A solid base is stronger, but does not provide the desired operating conditions. So for this bed we used our regular base.

To provide the necessary strength and rigidity of the bed, we have developed a solid metal frame. Our welding partners helped us in its production. Thanks to their skill, the customer received a frame that was flat across the entire plane with angles of 90 degrees. If you have encountered similar works, then most likely you know that when welding, the material “leads” and the result obtained may differ from the planned one.

The effect of a floating bed is achieved through the use of a base. And the base should be less bed. However, the small plinth disrupts the balance of the structure. If three adults sit at the feet of this bed at the same time, they will outweigh the bed. This is at least inconvenient, if not dangerous.

Therefore, when making a floating bed, the weight distribution is different. The headboard becomes heavier and the base becomes heavier. This allows you to maintain balance and makes the bed safe to use. In our case, the base weighed about fifty kilograms. And the width of the headboard was 3.5 m.

A smaller base size is not the only condition for “hovering”. It is advisable that it should not be visible at all. To completely “hide” the base, we used mirrors. Our partner also helped us with preparing the mirrors. This time is different. The mirrors were cut to size and finished around the edges. As you can see in the first photo, the technique worked. The base is not visible, the bed is flying.

And the third partner helped with the lighting. A workshop that deals LED lamps. The customer’s builders prepared the communications, and we connected the lighting. The work of several partner workshops helped us implement the project. When ordering a bed from us, you get not only competent work our masters. The experience of proven partner specialists is at your service. You voice your wishes, and we will implement them.

Workshop-atelier "Sofa Master" offers you a wide range of production services upholstered furniture according to individual requirements. You can order sofas of any types and models, using modern upholstery materials. Guarantee High Quality and affordable prices!

The cost of making a sofa in Moscow starts from 8,000 rubles. you can on our website.

If you have encountered the purchase of serial furniture, then you are well aware of the problem of choosing the appropriate size, color, and configuration of the product.

We know how to make your task easier and make the purchasing process successful and hassle-free. The best decision for you – making custom sofas in Moscow.

Types of sofas to order

classic;
angular and radius;
kitchen corners;
modular designs from mobile blocks;
transformers equipped different types systems - Eurobook, dolphin, click-clack, accordion, French folding bed and others;
models with drawers;
couches, ottoman, sofa and others.

3 main advantages of custom-made sofas with us

Design development taking into account your wishes.

The use of wear-resistant upholstery materials - fabric, genuine leather, eco-leather.

Prompt production and targeted delivery in Moscow at a time convenient for you.

In our work we use only environmentally friendly raw materials that do not emit harmful substances. Therefore, our products can be safely used in bedrooms and children's rooms.

As materials for creating frames, we use natural hardwood, chipboard, and others. wood materials. We pay a lot of attention to fastenings, transformation mechanisms and fittings. The service life of the product depends on their reliability. That's why ours will serve you for decades.

How to order a sofa according to individual parameters?

1. Select the type of product and its design.
2. Our specialist will come to you to carry out necessary measurements at a convenient time. You can also measure the parameters yourself and transfer them to our specialists in writing or by phone.
3. We prepare an estimate.
4. After agreeing on all the nuances of payment and production time, we begin manufacturing the sofa.
5. When it is ready, we will deliver it to the address you specified.

You can see examples of our work below.

The comfort of a bedroom is determined by various factors and interior details, but the most important element of the area is the bed. It provides complete sleep and rest for your thoughts and body, allowing you to enjoy your time in the cozy atmosphere of your home. The design of a sleeping bed can effectively emphasize the atmosphere of the room, its calm and peaceful state. Do you want to decorate the area with an exclusive piece of furniture? We offer to buy a custom-made bed. The production and design of interior parts is the main activity of the Free Style company. We create original and unique wood products for your comfort and relaxation.

Perfection in every model

The bedroom has a unique atmosphere that is full of intimate notes. Place accents in exclusive interior, a custom-made bed will help make the design complete custom sizes. Taking into account the free space of the sleeping area, the style of the room and the wishes of clients, specialists create practical products from natural wood, filling the room with functionality and comfort. The main characteristics of goods that can be ordered according to an individual project are:

exclusivity of the model;
high quality workmanship;
use of first-class materials in the desired color range;
harmonious correspondence of furniture elements to the design of the room.

The bed is manufactured according to the company’s drawings and customer’s original designs. When developing the design of a piece of furniture for the sleeping and relaxation area, we take into account every detail: size, style, functionality and cost. The product price is formed individual characteristics products and is negotiated separately for each customer. main feature and the common feature of each model is perfection.

Materials such as genuine leather, its substitute and thick fabrics. The frame is made of durable solid wood. Based on your preferences, we will create a piece of furniture from birch, pine, beech, and oak. These materials are characterized by strength and durability. The headboard of the sleeping bed will take on any shape that will suit the interior and the wishes of the client.

Variety of options

Beds to order individual projects not only differ unique design. They are characterized by convenience, ergonomics and stylish design. The design of the products is presented in two options: frame and integral. For small apartments It is advisable to order a modular bed that combines niches and shelves for storing things and decorating the room with accessories. Modern and convenient “transformers” fold up, freeing up room space.

Before making a bed to size, designers offer virtual design services for unique models. Design development is carried out for the finished interior of the sleeping area. We create completely new options or offer inexpensive purchases ready-made models beds presented on the site. Each product combines aesthetics, comfort and functionality.

Company Services

"Free style" is the world original solutions, which are easily, efficiently and cheaply implemented into reality. Creative and individual approach of specialists to each order, application innovative technologies production and first-class materials make it possible to improve the comfort, aesthetics and functionality of premises. In addition to manufacturing original elements furniture, we offer assembly services in Moscow and delivery throughout the capital to other regions of the country. Our main task is to sell comfort and coziness to perfect the interior of your homes.