Activator of living and dead water by hand. How to remove muscles on calves in girls

Every person dreams of a long and happy life, which is not overshadowed by various ailments. And traditional medicine has always sought to fulfill this desire. She has accumulated vast experience in studying medicinal plants and many recipes have been created to relieve various diseases.

One of the proposed traditional medicine The miracle cure is water, which is called living and dead. Do you remember how in fairy tales, when they used this method to resurrect a dead hero? First he was sprinkled with dead and then living water.

History of application

The gifts of nature have long been used by man in medicinal purposes. One of them that deserves special attention, - “life-giving water.” Even in ancient manuscripts, researchers found a mention that during his military campaigns along the mountain ranges of the Pamirs, Caucasus and Tien Shan, Alexander the Great found a source healing water. He collected the liquid into a jug, but his daughter stole it and poured it on herself. As a result of this, she became invisible and immortal.

There is also information that many Popes, Chinese emperors and others the mighty of the world This is why expeditions were organized in search of an elixir that would allow one to obtain immortality. All these fairy tales and legends are clear confirmation that our ancestors knew about the existence of living and dead water.

Sources

Today you can make living and dead water with your own hands. And in ancient times, people took it from natural sources.

The dead one was in stagnant lakes and swamps. This liquid was not consumed internally. It was used only by healers for various external potions. The water of mountain rivers, glaciers and waterfalls is considered alive. It was drunk and also used in the preparation of various medicines.

Modern research

Today, to obtain healing liquid there is no need to search for its sources. To do this, it is enough to make a living and dead water apparatus at home. When used as a result of hydrolysis, so-called activated water is obtained.

Soviet scientists were busy studying the properties of this liquid back in the 80s of the 20th century. However, the results of all experiments and experiments were simply kept secret for the general public. However, everything secret sooner or later becomes clear. After some time, doctors and traditional healers learned about the results of the experiments. And here the work of Western researchers played a big role. Their results could be read in published scientific articles.

Research has proven that living water, which is also called catholyte, becomes negatively charged due to hydrolysis. This transformation helps it obtain high regenerating and immunostimulating properties. This makes it possible for a liquid that has undergone the hydrolysis process to become healing and be used to get rid of many ailments.

The unique properties of such water were confirmed by the USSR Pharmacological Committee. At the same time, it was said about its absolute harmlessness not only for external, but also for internal use.

The water that accumulates near the positive electrode after electrolysis is called anolyte. Her unique properties have been known to folk healers since time immemorial. Thanks to this water, people managed to escape from rotting wounds and bedsores.

Obtaining healing liquid

In order to get activated water, you do not need to look for some distant and sometimes inaccessible sources. To do this, just open the tap and use a special device.

Based on the basic concepts of chemistry, living water has alkaline properties. They contribute to the healing effect. The properties of dead water are acidic. That is why it exhibits a disinfecting effect.

Electric current, when passing through ordinary water, radically changes its internal structure. At the same time, it erases harmful environmental information contained in the liquid. After such treatment, the water is divided into living and dead. Moreover, each of these two fractions has medicinal qualities.

Experiments on the use of activated liquid

The first apparatus of living and dead water in our country was invented by N. M. Kratov. The idea of creating this device did not come to the author by chance. In 1981, Kratov was treated in hospital. There he was diagnosed with prostate adenoma. Simultaneously with this pathology, he suffered from an inflammatory process in the kidneys. The course of treatment in the hospital lasted for a month, but did not bring any tangible results. That is why doctors offered Kratov surgery. He refused surgery and was discharged home.

At the same time, Kratov’s son suffered from a long-term non-healing wound. And the author, who created the apparatus of living and dead water, began to test the properties of the healing liquid on the affected area on his son’s skin. The results were not long in coming. The wound healed within two days. Such success inspired the inventor. He began to take this water himself, and soon his health improved. Along with the adenoma, radiculitis and leg swelling went away.

Application area

Besides Kratov healing properties and similar water was studied by G.D. Lysenko, as well as a number of other authors. As a result of the research, it became obvious that water, both living and dead, can save a person from almost fifty types of various diseases, starting with tonsillitis and ending with stomach and duodenal ulcers.

This list also includes such common diseases as colds and flu, runny nose and radiculitis, hypertension, etc.

Making at home

In order to use the healing liquid, it is enough to make a device of living and dead water with your own hands. Of course, such devices are not difficult to find on sale. Buying and delivering them will not be difficult.

However, the purchased apparatus for obtaining living and dead water, when examined in detail, has quite simple design. This makes me think about saving money. After all, the price of such a device is not so low. It is much easier to make a living and dead water apparatus with your own hands. It will only require a little time and a small amount of materials. The skill of our masters is always present.

Main details

In order to build a living and dead water apparatus with your own hands, you will need:

Glass jar;
- diode bridge that rectifies the mains voltage;
- a bag made of waterproof fabric;
- two electrodes;
- power cord.

With the help of skillful hands, all these parts can easily turn into a homemade apparatus of living and dead water.

Electrodes

This part must be made of food grade stainless steel. Salad bowls left in the house from Soviet times are perfect for this role. But if they are not there, then any utensils made from stainless steel will do. A graphite rod can be used for the anode.

If the apparatus for preparing living and dead water is assembled using a half-liter jar, then the length of the electrodes should be 100 mm. However, this volume can be increased. In order to create a device for living and dead water with your own hands, you can take a three-liter jar. In any case, the electrodes can be extended. Their size should be such that the distance between the metal and the bottom of the glass container is at least 5-10 mm.

Stainless steel sheets suitable for the manufacture of the anode and cathode should be 0.8-1 mm thick. Some craftsmen claim that they created the apparatus for producing living and dead water using aluminum electrodes.

Pouch

This part will be needed to separate the resulting water fractions. As a rule, a tarpaulin is used to make a bag. This could be a piece from a fire hose or a gas mask bag. But in any case, the material for the bag should not contain any impregnation. In order to ensure that there are no foreign substances, the prepared piece must be placed in water and boiled. The components used in impregnation will manifest themselves when heated.

The length of the finished bag must be in full accordance with the height of the glass jar used to create the apparatus. When cutting this part, cut off the required length of the tarpaulin. The bottom of the bag is sewn up with a piece of the same material or food-grade plastic is inserted.

Device assembly

The diagram of the apparatus that receives living and dead water is quite simple, and you can familiarize yourself with it in the article. To assemble the device, a U-shaped cut is made on the positive electrode. It is necessary to place a cloth bag on the anode. It will collect dead water. There is no need to make such a cut on the cathode.

Both electrodes are attached to the jar using an ordinary nylon lid. However, here it is worth using one trick. Due to the fact that such covers have little mechanical strength, it is best to attach the electrodes to them using an insulating sealing gasket. This will avoid unpredictability of their behavior during work. Such gaskets are made of fiberglass (without foil) or any plastic. This part has the appearance of a rectangle with rounded ends. Two holes are cut out on it, the diameter of which coincides with the diameter of the electrodes. The gasket is installed on the plastic cover. During operation, when living water and dead water are formed, the device releases gases from the liquid. For their exit, an additional hole is provided in the lid.

Next, a rectifying diode bridge is attached to the electrodes. It is important to mark the positive and negative outputs to the plate (“+” and “-”). For safety reasons, the bridge can be covered with a lid. When using a threaded diode, the thread must be attached to the positive electrode.

There is another way to assemble a similar circuit. It can be performed with a rectifier bridge. In this case, living and dead water will be produced even more intensively. The device (reviews from craftsmen confirm this) will become four times more powerful. Accelerating the process of preparing healing liquid is especially important when using it systematically.

A power cord with a plug is connected to the diode bridge. Its length must be at least 500-700 mm. It is important to isolate all exposed electrical connections, because for the process that results in living water and dead water, the device consumes an alternating voltage of 220 V. Next, the electrode, which is marked with a minus sign, is placed in a canvas bag, water is poured into the jar, and the whole structure begins to work when connected to the electrical network.

Preparing water

Getting the healing liquid is quite simple. To do this, pour water into a cloth bag. Next, a positive electrode is placed in it. This entire structure is immersed in a jar of water. And here there are also some nuances. The water in the jar should not be filled to the brim. It should be slightly below the top edge of the bag.

The whole process lasts no more than 5-10 minutes. Next, the electrodes are removed from the jar. This must be done very carefully. Otherwise, a mixture of the two resulting fractions will occur. At the end of the process, the water from the cloth bag is poured into a separate bowl.

Assembling a device with a different design

Due to the need for careful handling of the resulting fractions, this device is not very convenient. In addition, certain safety precautions must be observed when the live and dead water apparatus is operating.

The instructions for it warn that all manipulations of pouring water and removing the final product must be done without plugging the device into a power outlet.

A device whose design does not include the use of a fabric bag is considered more convenient. In this case, you will need to take two containers. However, banks are not suitable for this. Such containers are distinguished by the absence of a neck and steep, straight edges. The design of the electrodes in such a device remains unchanged. The only difference between such a device is that the anode and cathode must be installed in separate containers. Electrical contact must be ensured between the electrodes. To do this, they are connected with a cotton band wrapped in gauze, which is pre-soaked in water. Such a part will allow ions to move freely. As a result of the operation of the device, both living and dead water will be produced. Moreover, each of them can be seen in a separate container. This allows you to simply disconnect the installation from the network at the end of the work and obtain anolyte and catholyte immediately, and in equal volumes.

In the scheme of this design, as in the previous version, it is advisable to use a light bulb with a power of 15 W. They are usually used in sewing machines and refrigerators. If the electrodes are short-circuited, the light bulb will play the role of a fuse, and if the process does not have any failures, it will act as an indicator. At the beginning of water production, the light from it will be quite bright. Towards the end of the process, the light will begin to dim. The signal about the end of the production of activated water will be its complete shutdown.

Rules for using healing water

The catholyte prepared in the device is an alkaline solution with a bluish tint. It is a clear, soft liquid with an alkaline taste with a pH of 8.5 to 10.5. Catholyte, or living water, is able to retain its healing properties for at least two days. Only in this case it is important that the storage conditions are met. Living water should be kept in a closed container and in a darkened room.

The analyte has a yellowish tint. In addition, the difference between dead water and living water lies in its astringent, sour taste and somewhat acidic aroma. Anolyte retains its properties for half a month. But this only happens when it is stored in a closed container. The acidity of such a liquid is from 2.5 to 3.5 pH.

Activated water should be heated before use. However, some caution must be exercised. Water should be poured into a ceramic or enamel bowl and heated over low heat. Using an electric stove will cause a loss of its beneficial properties. It is strictly forbidden to bring such water to a boil. In this case it also becomes useless.

If both dead and living water are used at the same time, then between their doses you need to take a break of at least one and a half hours. In the case of local application, the pause is much shorter. It is only 10 minutes. This dosing regimen can be explained by the fact that when the analyte and catholyte are mixed, they are neutralized. As a result, the healing liquid simply loses its activity.

And although water activators are not too expensive, sometimes situations arise that a person simply cannot purchase this moment time, a much-needed device. This is completely fixable: you can make a simple water activator yourself.

The first requirement for every person who undertakes such work is to understand the topic. This is correct: you will have to be guided by electrical diagrams.

The second rule is to create such a device only in the most hopeless situations. Here it is necessary to explain in more detail: an electric activator of water collected in “field” conditions will never give the quality result that the manufacturer guarantees from the enterprise.

This option is really only needed for emergencies(for example, when the dacha ended pure water). The difference is this.

The purchased device is aimed at deep cleaning, including the removal of various impurities. It is able to work with large volumes while maintaining the required quality. In addition, the warranty period states the long-term operation of the device.
The “home” device provides very poor cleaning performance. It is best to use it in case of one-time need. Homemade products will not help cope with hardness and iron content.

According to experts, constant consumption of homemade purified water will cause damage to health. It is often impossible to select the appropriate stainless steel material for the manufacture of one of the anodes at home. This will lead to the fact that when current passes through such an electrode, the water (and then the body) will receive harmful metal ions nickel, vanadium, chromium, molybdenum. Their long stay and accumulation in the body lead to serious illnesses.

This does not happen after using industrial activator devices - here it is used for cathode production titanium coating or special food grade stainless steel. And for the anode they take platinum or other special coatings. At home, of course, there are no such resources.

If, after such warnings, you still have the determination and urgency to make a homemade activator, then you should read the following material.

Methods for creating water activators

The most natural and effective magnetic activator of water is a piece of silicon placed in it. After this, the container should be left to infuse for several days. However, this is not always convenient if there is an urgent need for cleaning, but there is another, more complex manufacturing option.

The following components will be needed:

diode bridge;
1 liter jar of water;
electrodes made of food grade stainless steel;
a canvas bag, which will become the dividing membrane.

A sample for making a canvas bag can be the material of a fire hose. If possible, it can be replaced with an unglazed ceramic glass.

The simplest diagram looks like this:

Again, the following requirements must be met:

the distance between the electrodes should not exceed 40 mm, and they should not reach the bottom of the jar;
Dimensions of stainless steel sheet: 40x160x0.8 mm.

The electrodes are fixed on a piece of plastic (acts as a cover). Here you also need to install a diode bridge with a switch. electrical safety remains relevant - that is why the structure at the top should be closed with a lid that is suitable in size.

Operating rules

You can use tap water, but if you use the chlorinated version, you should let it sit for a couple of hours. Another variant - boiled water . We lower the positive type of electrode into a tarpaulin filler (or a ceramic glass), and the other electrode will go into a jar. Now you can connect to the mains: inside the tarpaulin there will be acidic water with a pH of 6 or less, and in glass containers it will become alkaline with a pH value of 10 (7).

Usually, after turning on the device, 3 to 8 minutes are enough to prepare water of the required concentration. At the same time, it usually heats up to 70 degrees. After this, the plug is disconnected from the power, the tarpaulin is quickly pulled out, and the “dead” water (+) is poured into another container. Otherwise, the solutions will quickly mix and beneficial features will disappear.

Sometimes white flakes may float in the “live” liquid. Don’t be afraid, these are just hardness salts released in the activation chamber. You can remove them using a filter or simply settle and drain the sediment.

Both solutions should be stored in a dark container, tightly closed with a lid:

“living” water will retain its properties for a month;
for the “dead” - no more than two hours.

It is better to use both obtained solutions immediately rather than store them for a long time.

If food grade stainless steel was used for the electrodes, the process can be repeated 2-3 cycles. However, some measures are necessary to maintain the functionality of the device.

The cathode and anode should be swapped from time to time to ensure electrode self-cleaning.
The canvas bag is treated with table vinegar, immersing it there for half an hour. A small container that can accommodate it will do. After this procedure, the material is washed under running water.
Store the bag and jar separately.

In addition to these rules, the following safety measures must be observed.

Turn on the device only when it is filled with water and the electrodes are located inside the jar.
Do not touch the body of the device while it is running.
Keep children away from it and do not leave the device unattended.

It is better to purchase the model as soon as possible industrial production. This must be done for the safety of your own health and that of your loved ones.

Malakhov Gennady Petrovich

Man is for the world
The world is for man

"Living" and "dead" water.

In this article we will talk about Living and Dead water, how to get and prepare such water, what it is, how to use it and what it is for, what results to expect from the treatment.

I receive many letters on this topic with many questions, let’s start in order.

Can it be used on your system? "living" and "dead" water obtained by electrolysis?
What's happened Living and Dead water, how to cook it?
Where can I buy or how to assemble it myself? device for preparing Living and Dead water?
How safe is it?
What diseases can be treated treatment with Living and Dead water, what results to expect?

In the 80s of the last century, leading scientific institutes and medical clinics of the Soviet Union became interested in activated water. True, most of the studies were not advertised. But the information seeped into society and interested people - healers and doctors - learned about it. Moreover, abroad scientific works were conducted openly, and their results were published even in the press accessible behind the Iron Curtain, that is, in our homeland.

Official science has recognized that water that has received a negative redox potential during electrolysis, that is, living water, has high immunostimulating, regenerating and detoxifying properties, that is, meaning that it can be successfully used to treat many diseases. These unique properties of catholyte were confirmed by the USSR Pharmacological Committee (decision No. 211-252/791).

What about dead water? Its characteristics were also not questioned, because the anolyte solution, thanks to its antibacterial activity, had already saved hundreds of people from rotting wounds and bedsores.

It is difficult to determine which activated water solution is more important for human health, because both catholyte and anolyte are like two halves of a single whole - a medicine created by nature itself. But nature never makes mistakes, it only offers its help to man. It is the task of each of you to be able to take advantage of this help. And I will only tell you about the many years of experience that people have gained in the search for truth, because people need evidence. Well, here they are.

Obtaining “Living” and “Dead” Water occurs by electrolysis. "Living" water has pronounced alkaline, healing properties, and "dead water"- sour, disinfectant properties. I think that passing an electric current through water also changes its internal structure, erasing harmful environmental information. As a result of processing electric shock water acquires healing properties. Depending on the disease and the stage of its development, alkaline - “living” or acidic - “dead” water is used.

Activated water quickly and effectively treats many diseases, without any “chemistry”. It is used on the farm, in everyday life, in the garden and vegetable garden, for hygienic purposes, in livestock and poultry farming, etc.

The effectiveness of activated water also increases because during electrolysis "dead" water becomes positive and "living" water- negative electric potential. It becomes like a weak electrolyte that quickly interacts with body fluids (stomach juice, blood, lymph, intercellular fluid, etc.).

The human body is an energy system. Long-term practice of using activated water has confirmed the conclusions of scientists that it is the positive and negative charges of this water that greatly contribute to maintaining the energy balance of cells.

Activated water is used in Japan, Austria, Germany, Poland, India, Israel, and CIS countries. This water is absolutely not dangerous for either external or internal use. This was confirmed by the USSR Pharmacological Committee back in 1988 (DECISION Mo. 211-252*/791).

As an example, I will give several ways to use it.

At the beginning of 1981, the author of the device (Kratov) for preparation of “living” and dead water, fell ill with kidney inflammation and prostate adenoma. He was treated in the hospital for more than a month and... was offered surgery for the adenoma. He refused the “offer” and was discharged.

The first test of the received "Living and Dead" water The author of the device spent more than 6 months on a non-healing wound on his son’s hand.

The treatment trial exceeded all expectations: the wound on my son’s hand healed on the second day. Then the author of the device himself began to drink 0.5 glasses of “living” water before meals 3 times a day and felt cheerful. The adenoma disappeared within a week, as did the radiculitis and swelling of the legs.

To check the effectiveness of the treatment, the author of the device, after a week of taking “living” water, was examined at the clinic with all the tests, which did not reveal a single disease. Additionally, blood pressure normalized.

The boy's gums festered for 6 months and an abscess formed in his throat. Application in various ways treatments did not give the desired result. For treatment, the author of the device recommended gargling the throat and gums with “dead” water 6 times a day (i.e., disinfecting), and then taking a glass of “living” water orally. The result is complete recovery within 3 days.

This water can be used with great success in various cleansing procedures - enemas, "Sink Gesture", rinsing the mouth, and for women and the vagina.

Dead water

So, dead water, or anolyte, is an acidic solution and has strong bactericidal properties. It looks like a colorless liquid with an acidic odor, and tastes sour and slightly astringent. Its acidity ranges from 2.5 to 3.5 5 mV.

Because the dead water It has bactericidal properties and is an excellent disinfectant. Dead water It is successfully used for disinfecting linen, dishes, bandages and other medical materials, as well as premises. This water can be used to treat the room where the patient is in order to prevent re-infection and infection of relatives; bedding and beds are treated with dead water if there are insects in the house - fleas, bedbugs. And for health, dead water is an unsurpassed remedy for colds. It is used for diseases of the throat, nose, and ears. Gargling is a means of treating and preventing influenza and acute respiratory infections.

But these functions use of dead water not limited. With its help, they lower blood pressure, calm the nerves, get rid of insomnia, reduce pain in the joints of the hands and feet, destroy fungus, treat stomatitis, and dissolve bladder stones.

Dead waterIt retains its properties for quite a long time - for 1-2 weeks when stored in closed containers.

Living water.

Living water, or catholyte, is an alkaline solution and has strong biostimulant qualities. This water tastes slightly alkaline, but is as colorless as anolyte. The acidity of living water ranges from 8.5 to 10.5 5 mV.

Because the living water is a natural biostimulant, it perfectly restores the body’s immune system, provides antioxidant protection for the body, especially in combination with the use of vitamins, and is a source of vital energy.

Living wateractivates all biological processes of the body, increases blood pressure, improves appetite, metabolism, and improves overall well-being.

It quickly heals various wounds, including stomach and duodenal ulcers, bedsores, trophic ulcers, and burns. This water softens the skin, gradually smoothes out wrinkles, destroys dandruff, and improves hair structure.

Your name living water justifies everywhere. Even dried flowers come to life if they are placed in a vase filled with living water. IN agriculture living water - indispensable assistant. Irrigation with this water greatly increases the yield of berries and fruits. Living water can be called a double medicine, because it provides direct assistance to the body, and also enhances the effect of herbal medicines that the patient takes. By the way, plants on the windowsill also acquire “living” force under the influence of spraying and watering with living water.

The only drawback of living water is that it quickly loses its biochemical and healing properties, since it is an active unstable system. If stored in a closed container in a dark place, it can be used for two days. Currently, many devices for preparing living water are being developed. The developers of these devices set themselves the task of extending the properties of water after it has been prepared. Dina Ashbar, who has her own clinic and production in Germany, managed to extend therapeutic effect living water for up to a month, but as she writes, “this requires additional rather expensive equipment.”

Let's talk in more detail about the treatment of women with these types of water.

In view of the fact that most diseases of the vagina arise due to the fact that its acidity is disturbed (rots), the use of “dead” - acidic water quickly destroys rottenness and restores health. First you need to use “dead” water. When the infection is destroyed, “living” water must be used to accelerate the healing of the mucous membranes of the vagina, vagina, and cervix.

To do this, rinsing with a rubber bulb is used, and the “dead” water is made “stronger” - with increased acidity(you can get water much more acidic than your own urine - this is the power of this method). So, wash your vagina with “dead water” 3-5 times a day, and at the end of the day with “live water”, 2 times. It all depends on the circumstances and severity of the disorder.

In the same way, you can use this water for an enema. For dysbacteriosis, use acidic - “dead” water. After 2-3 enemas (one enema per day), do 1-2 with “live” water. And so on several times. Approximately the same should be done for colitis of the large intestine.

The indicated types of water are very good for treating small children - it is harmless (of course, everything should be in moderation).

Activated water several times enhances the healing properties of golden mustache, cinquefoil and other herbs, as if created by nature to treat people. Activated water is also of great importance for growing a green medicine cabinet at home. My favorite golden mustache grows in a matter of weeks if it is watered and sprayed with activated water.

Prepared “live” and “dead” water Acan be stored for a very long time without losing their properties. (A test of water in the laboratory of the Stavropol Vodokanal (“live” strength of 11.4 units and “dead” - 4.21 units) showed that the strength decreased by hundredths of units over the month, and temperature does not affect the decrease in water activity. )

Now devices for preparing Living and Dead water They are sold everywhere, you can buy and use them. Currently, tables have been compiled for the treatment of a number of diseases withusing “living” and “dead” water.

The use of “living” and “dead” water to treat a number of diseases.

1. Prostate adenoma.

For 5-10 days, 4 times a day, 30 minutes before meals, take 1/2 cup of “living” water.

After 3-4 days, mucus is released, there is no desire to urinate frequently, and on the 8th day the swelling goes away.

2. Sore throat.

For 3-5 days, 5 times a day after meals, gargle with “dead” water and after each gargle, drink 1/4 cup of “living” water.

The temperature drops on the 1st day, usually on the 3rd - the disease goes away.

3. Allergies.

For three days in a row, after eating, rinse your mouth, throat and nose with “dead” water. After each rinse, after 10 minutes, drink 1/2 glass of “living” water. Moisten skin rashes (if any) with “dead” water. The disease usually goes away within 2-3 days. It is recommended to repeat the procedure for prevention.

4. Pain in the joints of the arms and legs.

3 times a day before meals, take 1/2 glass of “dead” water for 2-5 days

The pain stops on the 1st day.

5. Bronchial asthma; bronchitis.

For three days, 4-5 times a day, after eating, rinse your mouth, throat and nose with warmed “dead” water. In 10 minutes. After each rinse, drink 1/2 glass of “living” water. If there is no noticeable improvement, do inhalation with “dead” water: heat 1 liter of water to 70-80 ° C and breathe in the steam for 10 minutes. Repeat 3-4 times a day. The last inhalation can be done with “living” water and soda. The urge to cough decreases and overall well-being improves. If necessary, repeat the course of treatment.

6. Inflammation of the liver.

Every day for 4-7 days, take 4 times 1/2 cup: on the 1st day only “dead” water, on the subsequent days - only “living” water.

7. Inflammation of the colon (Colitis).

It is better not to eat anything on the first day. During the day, drink 1/2 glass of “dead” water with a “strength” of 2.0 pH 3-4 times. The disease goes away within 2 days.

8. Gastritis.

For three days, 3 times a day, 1/2 hour before meals, drink “living” water. On the first day 1/4 cup, on the rest 1/2 cup. If necessary, you can drink for another 3-4 days. Stomach pain goes away, acidity decreases, appetite and general well-being improve.

9. Herpes (Cold).

Before treatment, rinse your mouth and nose thoroughly with “dead” water and drink 1/2 cup of “dead” water. Tear off the bottle with the contents of herpes with a cotton swab moistened with heated “dead” water. Next, during the day, apply a tampon moistened with “dead” water to the affected area 7-8 times for 3-4 minutes. On the second day, drink 1/2 cup of “dead” water and repeat rinsing. Apply a tampon soaked in “dead” water to the crust that has formed 3-4 times a day. You need to be patient a little when you break the bottle. The burning and itching stop within 2-3 hours. Herpes goes away within 2-3 days

10. Hemorrhoids.

For 2-7 days in the morning, rinse the cracks with “dead” water, and then apply tampons with “living” water, changing them as they dry

Bleeding stops, cracks heal within 2-3 days.

11. Hypertension.

During the day, take 2 times 1/2 cup of “dead” water.

The pressure is normalized.

12. Hypotension.

During the day, take 1/2 cup of “living” water 2 times.

The pressure is normalizing

13. Worms (helminthiasis).

Make cleansing enemas, first with “dead” water, and after an hour with “living” water. During the day, drink two-thirds of a glass of “dead” water every hour. The next day to restore health, drink 0.5 glasses of “living” water half an hour before meals. You may not feel well. If recovery has not occurred after 2 days, then repeat the procedure.

14. Purulent wounds.

Rinse the wound with “dead” water, and after 3-5 minutes moisten it with “living” water, then moisten it 5-6 times a day with only “living” water.

Healing occurs within 5-6 days.

15. Headaches.

Drink 1/2 glass of “dead” water.

The pain goes away within 30-50 minutes.

16. Fungus.

First wash the areas affected by the fungus thoroughly. hot water With laundry soap, wipe dry and moisten with “dead” water. During the day, moisten with “dead” water 5-6 times and allow to dry without wiping. Wash socks and towels and soak them in “dead” water. Similarly (you can disinfect shoes once) - pour “dead” water into them and leave for 20 minutes. The fungus disappears within 4-5 days. Sometimes the procedure needs to be repeated.

17. Flu.

During the day, rinse your nose and mouth with “dead” water 8-12 times, and at night drink 1/2 glass of “living” water.

Within 24 hours the flu disappears.

18. Diathesis.

Moisten all rashes and swelling with “dead” water and allow to dry. Then make compresses with “living” water for 10-5 minutes. Repeat the procedure 3-4 times a day. The affected areas heal in 2-3 days.

19. Dysentery.

It is better not to eat anything on this day. During the day, drink 1/2 glass of “dead” water with a “strength” of 2.0 pH 3-4 times. Dysentery goes away within 24 hours.

20. Jaundice (Hepatitis).

3-4 days, 4-5 times a day, 1/2 hour before meals, drink 1/2 glass of “living” water. After 5-6 days, see a doctor. If necessary, continue treatment. Your well-being improves, your appetite appears, and your natural complexion is restored.

21. Foot odor.

Wash warm water feet, wipe dry, moisten with “dead” water, and after 10 minutes - with “living” water and let dry

The unpleasant smell will disappear.

22. Constipation.

Drink 0.5 glasses of “living” water. You can make an enema from warm “living” water.

23. Toothache.

Rinse your mouth with “dead” water for 5-10 minutes. The pain disappears.

24. Heartburn.

Drink 1/2 glass of “living” water.

Heartburn stops

25. Colpitis.

Heat the “dead” water and “live” water to 37-40 ° C and syringe first with “dead” water at night, and after 15-20 minutes with “live” water. Repeat the procedure for 2-3 days.

After one procedure, colpitis goes away.

26. Conjunctivitis, stye.

Rinse the affected areas with warm water, then treat with heated “dead” water and allow to dry without wiping. Then, for two days, 4-5 times a day, make compresses with heated “living” water. At night, drink 1/2 glass of “living” water. The affected areas heal in 2-3 days.

27. Ringworm, eczema.

For 3-5 days, moisten the affected area with “dead” water and let it dry, then moisten it with “living” water 5-6 times a day. (In the morning, moisten with “dead” water, after 10-15 minutes with “living” water and another 5-6 times with “living” water during the day.)

Cures in 3-5 days.

28. Washing your hair.

Wash your hair with shampoo, dry it, moisten your hair with “dead” water, and after 5 minutes with “living” water.

Dandruff disappears, hair becomes softer and healthier.

29. Burns.

If there are blisters - dropsy - they must be pierced, the affected area must be moistened with “dead” water, and after 5 minutes with “live” water. Then moisten with “living” water 7-8 times during the day. The procedures take 2-3 days.

Burns heal in 2-3 days.

30. High blood pressure.

In the morning and evening, before meals, drink 1/2 glass of “dead” water with a “strength” of 3-4 pH. If it doesn’t help, then drink a whole glass after 1 hour. The blood pressure normalizes and the nervous system calms down.

31. Low blood pressure.

In the morning and evening, before meals, drink 1/2 glass of “living” water with pH = 9-10. The blood pressure returns to normal and a surge of strength appears.

32. Diarrhea.

Drink 1/2 glass of “dead” water; if the diarrhea does not stop within an hour, repeat the procedure.

Abdominal pain stops after 20-30 minutes.

33. Polyarthritis, arthritis, osteochondrosis.

The full cycle of treatment is 9 days. Drink 3 times a day, 30-40 minutes before meals: - in the first three days and 7, 8, 9 days, 1/2 glass of “dead” water; — 4th day — break; — 5th day — 1/2 cup of “living” water; — 6th day — break.

If necessary, this cycle can be repeated after a week. If the disease is advanced, then you need to apply compresses with warm “dead” water to the sore spots. Joint pain goes away, sleep and well-being improve.

34. Cut, prick, rupture.

Rinse the wound with “dead” water and bandage it.

The wound heals within 1-2 days.

35. Neck cold.

Make a compress soaked in warm “dead” water on your neck and drink 1/2 cup 4 times a day before meals.

The disease goes away within 1-2 days.

36. Prevention of insomnia, increased irritability.

Drink 1/2 glass of “dead” water at night. For 2-3 days, 30-40 minutes before meals, continue to drink “dead” water in the same dosage. Avoid spicy, fatty and meat foods during this period. Sleep improves and irritability decreases.

37. Prevention of acute respiratory infections and colds during epidemics.

Periodically, 3-4 times a week in the morning and evening, rinse your nose, throat and mouth with “dead” water. After 20-30 minutes, drink 1/2 glass of “living” water. If you come into contact with an infectious patient, perform the above procedure additionally. It is advisable to wash your hands with “dead” water. Vigor appears, performance increases, and overall well-being improves.

38. Psoriasis, scaly lichen.

One treatment cycle - six days. Before treatment, wash thoroughly with soap, steam the affected areas at the maximum tolerable temperature, or make a hot compress. Then, moisten the affected areas generously with heated “dead” water, and after 8-10 minutes begin to moisten with “living” water. Next, the entire treatment cycle (i.e., all 6 days) must be washed with only “living” water 5-8 times a day, without prior washing, steaming or treating with “dead” water. In addition, in the first three days of treatment you need to drink 1/2 cup of “dead” food before meals, and on days 4, 5 and 6 - 1/2 cup of “live” food.

After the first cycle of treatment, a week-long break is taken, and then the cycle is repeated several times until recovery. If during the treatment the skin becomes very dry, cracks and hurts, you can moisten it several times with “dead” water.

After 4-5 days of treatment, the affected areas of the skin begin to clear up, and clean pinkish areas of the skin appear. Gradually the lichen disappears completely. Usually 3-5 treatment cycles are enough. You should avoid smoking, drinking alcohol, spicy and smoked foods, and try not to be nervous.

39. Radiculitis.

During the day, drink 3/4 glass of “living” water 3 times before meals. The pain goes away within a day, sometimes after 20-40 minutes.

40.Dilated veins, bleeding from ruptured nodes.

Rinse the swollen and bleeding areas of the body with “dead” water, then moisten a piece of gauze with “living” water and apply to the swollen areas of the veins.

Take 1/2 cup of “dead” water orally, and after 2-3 hours start taking 1/2 cup of “live” water at intervals of 4 hours, 4 times a day. Repeat the procedure for 2-3 days.

Areas of swollen veins resolve, wounds heal.

41. Acne, increased peeling of the skin, pimples on the face.

In the morning and evening, after washing, 2-3 times at 1-2 minute intervals, rinse your face and neck with “living” water and let dry without wiping. Apply compresses to wrinkled skin for 15-20 minutes. In this case, the “living” water should be slightly heated. If the skin is dry, then first it must be washed with “dead” water. After 8-10 minutes, do the above procedures Once a week, you need to wipe your face with this solution: 1/2 cup of “living” water, 1/2 tablespoon of salt, 1/2 teaspoon of soda, after 2 minutes, rinse your face with “living” water.

The skin smoothes out, becomes softer, minor abrasions and cuts heal, acne disappears and peeling stops. With long-term use, wrinkles practically disappear.

42. Removing dead skin from the soles of your feet.

Soak your feet in soapy water and wash them in warm water, and without wiping, wet your feet in heated “dead” water, rubbing areas with growths, remove dead skin, rinse your feet in heated water, and wipe dry.

43. Improving well-being, normalizing the body.

In the morning and evening after taking food, rinse your mouth with “dead” water and drink 1/2 cup of “live” water with an alkalinity of 6-7 units.

44. Cholecystitis (inflammation of the gallbladder).

For 4 days, 3 times a day, 30-40 minutes before meals, drink 1/2 glass of water: 1st time - “dead”, 2nd and 3rd times - “alive”. “Living” water should have a pH of about 11 units. The pain in the heart, abdomen and right shoulder blade goes away, the bitterness in the mouth and nausea disappear.

45. Eczema, lichen.

Before treatment, steam the affected areas, then moisten with “dead” water and allow to dry. Next, moisten it 4-5 times a day only with “living” water. At night, drink 1/2 glass of “living” water. The course of treatment is a week. The affected areas heal within 4-5 days.

46. Cervical erosion.

Douche overnight with “dead” water heated to 38-40°C. After 10 minutes, repeat this procedure with “living” water. Next, repeat washing with “living” water several times a day. Erosion resolves within 2-3 days.

47. Ulcer of the stomach and duodenum.

For 4-5 days, 1 hour before meals, drink 1/2 glass of “living” water. After a 7-10 day break, repeat the treatment. The pain and vomiting stop on the second day. Acidity decreases, the ulcer heals.

Note.

When only “living” water is ingested, thirst arises; it must be quenched with compote or acidified tea. The interval between taking “dead” water and “live” water should be at least 2 hours.

Alkaline water is considered to be water whose pH is 10-11 units (it has a white precipitate). Acidic water is considered to be one whose pH is 4-5 units.

How water is prepared is described in the instructions for the device.

"Living" and "dead" water beautiful additional remedy to a system of natural healing.

As you may have noticed, application of Living and Dead water does not require any skills or knowledge, everything is done very simply and a confident result is achieved in a fairly short period of time, which is a huge plus for this type of treatment.

Pay attention to the widest spectrum of action of Living and Dead water, about 50 different diseases can be cured, and how many more are there for everyday use. In a word, for almost all occasions, I was very impressed.

About the device "Living and Dead" water.

Now let's talk directly about the device for obtaining Living and Dead water. Now there are many different types of devices on the market (Melesta - made in Ufa, Zhivitsa - made in China), there are also home-made devices using a fire hose (I do not recommend using these), there are also officially manufactured various enterprises, I personally tried a lot and settled on a product produced in Belarus by the Aquapribor research and production enterprise.

Of all the devices I have seen, I believe apparatus AP-1 the most correct one. It uses very high-quality manufacturing materials, including high-quality food-grade plastic, a unique method of manufacturing electrodes from noble metals (titanium, platinum), found only in this device, a very high-quality ceramic glass made from a special type of clay, which acts as a diaphragm, very nice appearance products. Taken together, this gives the effect that the inventor of the device, Kratov, achieved.

The device has passed all possible tests and has all the necessary certificates of conformity.

Household water activator (electric activator) AP-1 - a lightweight, uncomplicated, compact device that allows everyone at home in just 20-30 minutes to get about 1.4 liters of activated ( "alive" and "dead") water. To do this, just fill the vessel with water, plug the plug into a 220V outlet and after 20-30 minutes. pour the already activated water into different vessels. The device is electrically safe, reliable, and consumes as much electricity as a 40-watt light bulb.

The main differences and advantages of the AP-1 device.

Four-electrode switching circuit: 2 anodes and 2 cathodes.
The anodes are made of ultra-pure titanium coated (black on the side where the electric current passes) from the platinum group metal, the cathodes are made of food-grade stainless steel.
The membrane used is a structure in the form of a ceramic microporous glass (from clay used in the production of food utensils) made using special technology.
The coating is applied to the anodes in order to prevent the destruction of the anodes during the process of electrolysis and the penetration into water of heavy metal ions chromium, nickel, vanadium and other metals that are not excreted from the body.
In order to ensure electrical safety and compliance with GOST requirements, a switching power supply with reduced voltage and galvanic isolation from the 220 V supply network is used as a power source.
The design provides additional safety measures in the form of a limit switch used to cut off power from the electrode system when removing the top cover of the electric activator.

Device for preparing “Living and Dead water” - “Melesta”

There is another device that I also recommend, this device for preparing "Living and Dead" water "Melesta"- this device is made of cheaper materials than AP-1: instead of a ceramic glass, a fabric glass is used (acts as a diaphragm), and instead of 4 electrodes made of high-quality alloys, the usual 2 electrodes made of food-grade steel are used, the product’s nondescript appearance, rough design.

But all this contributed to a significant reduction in the cost of the product compared to AP-1, which is a significant plus for many people whose income does not allow them to purchase AP-1; the water produced by this device has all the properties of water prepared on AP-1. Therefore, I also recommend it to everyone without exception for home use. It has all the necessary certificates of conformity (No. POCC RU. AYA B24400).

P.S. AP-1 is your personal doctor and an excellent assistant in everyday life. I personally actively use this device and am very pleased with its work, it has hundreds of applications, with its help you and your family and friends will be able to forget about illnesses and visits to doctors forever. The device copes with its tasks perfectly; it will become your reliable friend whom you can always rely on.

Addition to the article dated 05/13/2010

Devices for preparing “Living and Dead” water “Zdravnik” and “PTV” were considered.

Device for preparing “Living and Dead” water “Zdravnik”.

Externally, the device is made by analogy with the Melesta and the Belarusian AP-1, but in terms of workmanship it is closer to the AP-1.

The device is very easy to use and does not require special care and service. It is worth noting the high quality of the electrodes (food grade stainless steel is used), electrical safety requirements are met, and there is a certificate of conformity (TU - 5156-001-62565770-2010).

Just like the AP-1, it has two versions:

A classic, time-tested design of the device using a fabric glass for “Dead Water”.
Version using a glass for “Dead” water, electroosmotic, made of nanostructured ceramics.

A little more about this glass.

The glass provides optimal pH values and the Redox Potential of the resulting solutions. The glass allows you to visually monitor the process of water activation and allows you to obtain solutions with more high level Oxidation-Reduction Potential (ORP).

Working principle of the glass:

When carrying out the process on initial stage the necessary polarization of solutions occurs and classical electroosmosis is observed - the liquid shifts towards the negatively charged electrode (the anolyte level drops). Upon reaching the Oxidative-

When the reduction potential of the catholyte and anolyte reach optimal equilibrium values, repolarization occurs on the walls of the glass and the liquid begins to move in the opposite direction (the anolyte level rises).

Due to the greater porosity of the glass, it practically does not clog during operation and requires less maintenance.

Device for preparing “Living and Dead” water “PTV”».

This device is neither externally nor internally (in design) similar to “Melesta”, “AP-1”, “Zdranik”.

The main purpose of this device is professional activity, can be used in medical institutions, rest homes, dispensaries and, of course, it can be used at home.

The device is certified and consumes only 75 watts of electricity. (Certificate of Conformity No. ROSS LT. AYA46.A14995 Sanitary Epidemiological Conclusion No. 77.01.06.485.P.06092.03.2)

For the development and organization of serial production of the household electrolyzer-activator PTV-A, NPF “INCOMK” was awarded a Silver medal in 2004 and a Bronze medal in 2005 by the International Salon of Innovations and Investments.

What are its differences:

A glass is not used to prepare “Dead” water; instead of a glass, the device is divided into two parts (the part for “Dead” water is removable), these parts are divided by a membrane made of special wood fiber.

Externally, the device looks very solid, has a high-quality body, the electrodes are much thicker, more reliable than other devices, have a long service life, and are made very well.

This device also has two options, with and without a regulator; using the regulator, you can set the concentration of water, you can make a healing drink for everyday use, you can make water for the prevention of diseases, or you can make a solution for medicinal purposes.

Device for preparing "Live and Dead" water "Melesta" (economy class device). - 1300 rub.

The installation has a multi-purpose purpose, from self-improvement and wound treatment, to germinating seeds and accelerating plant growth.

In fact, it has been noticed that if plants are watered with living water (anolyte) in winter, they begin to bloom.

Wounds treated with dead water (catholyte) heal faster. In terms of improving the health of your own body, I can only say one thing, this is a purely individual and voluntary matter.

A lot of articles on the use of water divided into fractions were published at one time - if you want, you can easily find them.

This device can be assembled without any preliminary preparation from readily available means found without leaving home.

The main parts are electrodes. There are no special difficulties in manufacturing. The only thing that definitely needs to be noted is that the material from which they are made should only be food grade stainless steel. Technically, as you understand, it will not work for such an installation.

As you can see from the picture, nothing complicated, two L-shaped plates with a hole for fastening and contact.

One plate has a peculiar cut - when the middle protrusion is bent at an angle, it becomes a hook for hanging the bag.

It is not necessary to make such a fastening cut on the second plate.

The next part to be manufactured is the stiffening plate. It is designed to prevent the electrodes from touching each other in any way during operation of the device. 220V in water, you know, is an unpleasant thing.
When used as load-bearing structure For a regular polyethylene lid for a jar, this plate will not be superfluous at all, since during operation of the device there is a slight, although almost imperceptible, heating, and it is known how heated polyethylene behaves. So, just in case, it won't hurt.

The next item is a bag for collecting catholyte. This is where it will definitely be difficult without women’s hands.

The material for the bag is thin tarpaulin. For example, the tarpaulin from a gas mask bag came in handy for me. The selection criterion is heavy blowing of air through it. Synthetic materials It’s better not to use it - it’s hard to guess what kind of nasty stuff they’ll release in their work.

When these components are ready, you can start making the lid. A regular jar lid will do. You need to make 3 holes in it: 2 mounting holes, one gas outlet.

When the device is operating, gas emissions are noticeable near the plates. Apparently the processing is carried out according to the type of weak hydrolysis, and accordingly the release of gas - by-product. This hole is just for equalizing the pressure inside and outside the jar when the lid is closed.

The order of assembly of the device is clearly visible in the figure below:

As you can see, nothing complicated. It may be noted that there should be two nuts on each bolt. One for fastening the electrode, the other for ensuring reliable contact. For contact, pads from diodes of the KD202 type are used, sandwiched between two washers.

Any diode with an operating voltage of about 400 volts can be used. The only condition is that you need to connect it as shown in the figure, otherwise you will end up with catholyte not in the bag, but around it, i.e. it's the other way around.

If you use the KD202 diode, then you can directly attach the anode plate to its thread, note - the anode plate, because It has an anode on its body. And the cathode is then connected directly to 220.

True, I myself used a diode bridge. As you yourself understand, a full-wave rectifier has twice the performance.

During operation you can notice the following:

The edges of the bag should be slightly above the water level to prevent mixing of fractions.
Exposure time is 10-15 minutes. Or until easy heating banks. You can, of course, look up the literature and measure the acidity of the catholyte with litmus papers, etc., but I think this is unnecessary. The strength of catholyte can be determined by its smell.
Do not use water directly from the tap. Given the chlorine contained in it, it is quite possible to assume that HCl will be present in the catholyte, i.e. hydrochloric acid. The water needs to stand for at least 4-5 hours.

All dimensions are based on a 3-liter jar

Addition from our reader Mikhail Klychkov ( [email protected])

Hello. The described method of obtaining “living” water has one drawback. The fact is that using a separation bag is quite troublesome. You need to take out “living” water very carefully so as not to mix it with “dead” water. It is not comfortable.

I came across an article with a different method of obtaining “living” and “dead” water.

The point is this. You need not one dielectric container for water, but two. Containers are needed without necks, i.e. with straight walls. Place the containers next to a small gap and pour approximately equal amount water (but not to the brim).

We place the anode in one container and the cathode in another. Now a little subtlety. It is necessary to make a conductor for installation between the containers. To do this, a clean cotton roll is wrapped in clean gauze and moistened with water. All this is placed between the banks so that the ends of the bundle are in both banks, i.e. We connect the liquids of the cans with such a kind of jumper. Ions will move along this jumper and accumulate in different containers.

After “dividing” the water, it will be enough just to turn off the voltage and remove the “jumper” - “live” water in one jar, “dead” in another.

The same article indicates that a break in one wire coming from the rectifier bridge to electrical network you need to turn on a 15...25 W light bulb at 220 V (such low-power ones are apparently installed in refrigerators, for lighting sewing machines, etc.).

Firstly, this will protect the circuit from a possible short circuit (with a “short circuit” in the circuit, the light bulb will only burn at full intensity). And secondly, it is needed as an indicator of the end of the process. We begin to separate the water - the light comes on. Gradually the brightness of its glow decreases. When the lamp goes out completely, the separation of water can be considered complete.

I hope this information will be useful.

Treatment of diseases with living water

Name of the disease	The order of procedures	Result
Prostate adenoma	For 5 days, 4 times a day for 30 minutes. before meals take 0.5 cup AND water	After 3 - 4 days, mucus is released, there is no desire to urinate often. On the 8th day the tumors disappear.
	For 3 days, gargle 5 times a day after meals. M water and drink 0.25 cup after each rinse AND water	The temperature drops on the first day, the disease goes away on the third day
Pain in the joints of the arms and legs	Take 0.5 cup 3 times a day before meals M water for 3 days	The pain stops on the first day
Liver inflammation	For 4 days a day, take 4 times 0.5 glasses of water. On the 1st day - only M, and in the next - AND water
Inflammatory processes, closed abscesses, boils	For 2 days, apply a compress to the inflamed area, moistened with heated M water	Heals within 2 days
Haemorrhoids	Rinse the cracks in the morning for 1-2 days M water, then apply tampons with AND water, changing them as they dry	Bleeding stops, cracks heal within 3 days
Hypertension	During the day, take 2 times 0.5 cups M water	The pressure is normalizing
Hypotension	During the day, take 0.5 cups 2 times AND water	The pressure is normalizing
Purulent wounds	Wash the wound M water, and after 5 minutes moisten AND water, then moisten only 5-6 times a day AND water	Heals within 5-6 days
Headache	Drink 0.5 glass M water	Goes away in 30-50 minutes
	Rinse your nose and mouth 8 times during the day. M water, drink 0.5 cup at night AND water	The flu disappears within 24 hours
Foot odor	Wash your feet with warm water, wipe dry, moisten M water, and after 10 minutes AND water and let dry	The unpleasant odor disappears
Toothache	Rinse your mouth M water 5-10 minutes	The pain disappears
	Drink 0.5 glass AND water	Terminates
	For 2 days, drink 4 times a day, 0.5 cups after meals. AND water	Terminates
	Warm up M And AND water to 37-40 degrees and syringe at night M water, and after 15-20 minutes syringe AND water. Repeat the procedure for 2-3 days	After one procedure, colpitis goes away
Facial hygiene	In the morning and evening, after washing, wipe your face, first M water, then AND water	Dandruff and acne disappear, the face becomes softer
Ringworm, eczema	For 3-5 days, moisten the affected area with water and let it dry, then moisten it 5-6 times a day AND water (moisten in the morning M, and after 10-15 minutes AND water and another 5-6 times AND during the day)	Cured in 3-5 days
Hair washing	Wash your hair with shampoo, dry, wet your hair M water, and after 3 minutes AND water	Dandruff disappears, hair becomes softer
	If there are blisters - dropsy, they must be pierced the affected area, moistened M water, and after 5 minutes AND water. Then moisten 7-8 times during the day AND water. Procedures take 2-3 days	Burns heal in 2-3 days
	Drink 0.5 glass M water, if it does not stop within an hour, repeat the procedure	Abdominal pain stops after 20-30 minutes
Cut, prick, rupture	Wash the wound M water and bandage	Heals within 1-2 days
Radiculitis	During the day, drink 3/4 3 times before meals; glasses AND water	The pain goes away within a day, sometimes after 20-40 minutes
Dilated veins, bleeding from ruptured nodes	Rinse swollen and bleeding areas M water, then moisten a piece of gauze AND water and apply to the swollen areas of the veins. Take 0.5 cups orally M water, and after 2-3 hours start taking 0.5 cups AND water at intervals of 4 hours 4 times a day. Repeat the procedure for 2-3 days.	Areas of swollen veins resolve, wounds heal
Improving well-being, normalizing the body	Rinse your mouth morning and evening after meals M water and drink 0.5 cup AND water alkalinity 6-7 units

M- dead water
AND- living water

The design and connection diagram of the device for obtaining activated water (living water and dead water) are given here for informational purposes. Strictly follow safety precautions when working with a 220V network. Responsibility for safe operation given device rests entirely with to the manufacturer of the device. Remember that 220V voltage is deadly!

The electrolyzer body is glass jar the capacity you need. The electrodes are made of PURE graphite (a rod and a piece of a cylindrical graphite electrode); a contact tin ring is made on the cylindrical graphite, to which a tap is soldered. The tin ring should be above the water level.

Inside the negative electrode there is a cup made of tarpaulin, calico or canvas (in other designs - a bag, depending on your skills in working with the material), the tarpaulin is hemmed to a glass tube rolled into a spiral. The main thing is to make the glass easy to remove.

The central electrode is attached to a heavy flat piece of plastic (not shown in the figure), which is placed on top of the neck of the jar. You can attach it to a standard polyethylene lid, but this is very inconvenient, because... removing the lid with the electrode from a jar of hot water (it gets very hot during processing) is dangerous and inconvenient. A handle made of wood or plastic is attached to the segment, the head of the electrode with a soldered wire is covered with an insulating plate (the insulating tape will not work - it will melt if it overheats).

Current limiter A 60W incandescent lamp is used, connected to a 220 V electrical network in series with a rectifier bridge. The lamp can be painted red (lit - danger) and its socket can be placed in the design of a protective box (chest) in which the filled jar will be placed. It is necessary to make a safety switch that disconnects both wires coming from the power plug when the cover is lifted. The main switch is mounted on the top of the cover. IT IS PROHIBITED TO REMOVE THE JAR, COVER WITH ELECTRODE, without disconnecting the device from the 220V network.

Current flows in the circuit I=60W/220V=360mA, in a radio parts store buy a rectifier bridge KTs-402A... KTs-402E (in this case the part will fit with any letter). Inspect the part carefully - there are pole markings on it. Place the diagram in a sealed box on the wall of the protective box (chest), so that it does not cling to the jar being pulled out. Connect the wires according to the sketch shown (arrows - to the electrolyzer jar).

“Dead” water is formed inside the bag-cup, and “live” water is formed in the jar. After turning on the unit, you need to wait 10-15 minutes (when the water has heated up to 60-70 o - it’s ready) C. Then remove the plug from the socket and drain the “dead” water into another container. The canvas bag (cup) can be used 1-2 times, then washed. Plaque is deposited on the bag. You need to store the bag separately from the jar so that it dries normally. The proposed device allows you to obtain “live” (alkaline) and “dead” (acidic, any strength) water. After completion of work, the elements of the device are washed. To facilitate this process, pour water into the vessels, change the connection of the electrodes and turn on the charger for 2-3 minutes. “Dead” water will remove the deposited salts on the walls of the elements, and all that remains is to rinse them and dry them.

“Live” water washes well greasy spots, and vegetables, fruits and berries washed in activated water do not spoil for six months. “Dead” water has high bactericidal properties. Therefore, for the purpose of disinfection, you can wipe furniture, soak laundry in it and wash dishes. After communicating with a sick person, it is useful to wash your hands in this water. To obtain “dead” water, which has higher bactericidal properties, before pouring it into the activator, 5 g of table salt must be dissolved in a liter of ordinary water.

And now a few more recipes for treating “living” and “dead” water. But before you use them, consult a specialist.

Toothache will disappear if you rinse your mouth with “dead” water for 5-10 minutes.
Heartburn will stop if you just drink 0.5 glasses of “living” water.
In just two days you can get rid of a boring cough if you drink 0.5 glasses of “live” water 4 times a day after meals.
Dandruff will disappear, your hair will be soft and silky if after each wash you wipe your hair dry, and then moisten it first with “dead” water, and after 3 minutes with “living” water.
The pain of radiculitis will go away if you drink 3/4 cup of “living” water 3 times a day before meals.
If you have excessive sweating of your feet, wash your feet in warm water, dry them, and then moisten them with “dead” water. After 10 minutes, rinse your feet with “living” water and let them dry. Dry the shoes inside. The sweating will go away.
Wrinkles and acne will disappear if you wipe your face every morning and evening after washing, first with “dead” water, and after 3 minutes with “live” water.
The blood pressure of hypertensive patients will be normalized if they drink 0.5 glasses of “dead” water 2 times a day for two days. And taking “living” water in the same way will help with hypotension.
“Dead” water will relieve joint pain in the arms and legs. For two days, drink 0.5 cups 3 times a day, half an hour before meals.