Ideas for storing tools in the apartment. Storing tools on the wall

Garage tools are indispensable items for every car owner. Quickly unscrew the bolts that secure the wheel, and then change it, drain and refill with fresh oil and antifreeze, even just clear snow or ice from the car windows - a tool that should always be at hand will help you do all this.

This includes gardening and construction equipment, often stored in such premises. This article offers recommendations on how to store tools in the garage correctly, and how to make some products with your own hands.

What tools are needed in the garage?

The garage is equipped with everything necessary based on the preferences of its owner. The specifics of performing repair or other types of work determine the presence of various equipment and tools in the garage. Despite the wide variety of jobs, it is advisable to have some garage tools in every room.

These include:

A set of keys, better with a special ratchet.
Set of heads.
Screwdriver set.
Pliers.
Wire cutters.
Round nose pliers.
Torque wrench, which allows you to select the correct tightening torque and ensure high-quality fastening of the wheel, this is especially important when replacing it on a car.
Set of mounts.
Universal clamp.
Retaining ring remover.
Chisels.
Magnet kit.

Makes it easier to do repair work also various electric and pneumatic tools.

It can be:

Electric drill.
Impact wrench.
Bulgarian.
Sander.
Electric lift.
Welding machine for complex repairs.

Car enthusiasts purchase many tools and devices at their own discretion, and some even make them themselves.

How to make a pipe bender

Owners of homestead farms often need to bend pipes or strips of metal, for example, when making their own greenhouse or laying a water supply system. There are many solutions to this problem. One of the options is shown in the photo.

To make a pipe bender you will need:

Tree.
Three polyurethane keel rollers for a boat trailer, which are fixed by goujons on the shafts to prevent rotation.
Steel angles that hold the rolled pipe in a perpendicular position and prevent it from bending into a spiral.
Stud and nut or threaded plate. These elements are needed to tighten the roller from below. Each time the pipe is rolled, the nut or threaded plate is tightened half a turn. If you need to make a bend of a small radius, but the result is a circle correct form, you may need to make from 50 to 100 runs.
Handle with bracket for rotating the pressure roller.

Pipe bender - bottom view

The order of work is as follows:

Wooden blanks are cut out.
Holes for the axles are drilled.
Axles with rollers are assembled.
IN vertical racks bearings for the axles are inserted.
The assembled units are mounted on the base of the pipe bender, and the guide angles are attached.
Guide plates are fixed to the top of the base post.
The upper part of the tool is assembled. A shaft with a roller and a handle are inserted, a pin or a long bolt is installed from below for the clamping nut.

When making a tool, special attention should be paid to the distance between the rollers. Each pipe has a minimum bend radius. The greater the distance between the rollers, the larger it will be.

In this case, less bending effort is required, and the end of the pipe will remain unrolled. The stroke of the pressure roller should be made as long as possible.

These points must be taken into account at the design stage and it is necessary to provide for the ability of the rollers to change their position if necessary. Therefore, in order for the pipe bender to be used repeatedly, the dimensions of the tool must be taken with some margin.

How to make a screw clamp

To attach a pipe bender to a workbench, as well as to perform other work, you will need various clamps. The price of a large number of products of different sizes is quite high. Therefore, if you wish, you can make such designs yourself.

To make a screw clamp you will need:

Profile metal sheet, approximately 10 millimeters thick.
Metal rod with M10 thread at one end.
Several M10 nuts.

The manufacturing procedure includes:

A bracket is marked on a sheet of metal. For this you can use ready product or prepare a template yourself, at your own discretion, taking into account the requirements of operating conditions and the required dimensions.
The workpiece is being cut. In this case, it is better to use an acetylene torch or gas cutter.
The edges are cleaned with an angle grinder and the burrs are removed.
Several M10 nuts are welded on the smaller side of the bracket or a hexagonal rod up to 50 millimeters long with an M10 thread along the entire length in the center of the part.
An M10 thread of the required length is cut on a round rod with a diameter of 10 millimeters.
All elements are given a protective coating with oil or nitro paint to protect against corrosion.

A homemade garage tool can have more difficult process manufacturing, which requires special equipment and skills.

Tip: Before use homemade instrument for a garage, you need to make sure of its quality, and most importantly, its reliability when working with it.

How to properly store tools in the garage

If it is quite difficult to make a tool for a garage with your own hands, then every owner of the premises can perform the correct and convenient placement of the tool in the garage.

In this case:

For proper organization spaces where small parts will be placed, you can equip several rows of long shelves along the wall (see), where you can then place garage tools.

Large items are placed in plastic containers, large-capacity boxes or special boxes.
Small fastening tool can be stored in homemade blocks using small food containers. A metal washer is glued to the bottom with superglue and attached to the wall through a strip with a magnetic strip.

Tools available in the garage small sizes convenient to hang on hooks that are attached to a long wooden strip fixed to the wall.

A special stand on the wall is perfect for storing frequently used tools.

Metal brackets are made for hacksaws and bow saws, which can be nailed to the doors or screwed with small screws.
Power tools in the garage are perfectly stored on racks (see) or shelves.

Tip: During the winter, power tools should be stored in the packaging in which they are sold, these can be portable plastic boxes with a handle, which will protect the product from the negative effects of moisture and mechanical damage.

Garden tools with long handles can be attached to special metal hooks.

Advice: Special racks should not be made for mowers, wheelbarrows, concrete mixers and other large equipment. And place metal hooks closer to the garage door.

It is convenient to store a semi-automatic welding machine or another type of machine on a special cart. Its use has the following advantages:

welding equipment is easy to deliver to the work site;
it is possible to attach a gas cylinder for welding, which is not very stable;
saving space in the room.

It is not at all difficult for a garage owner who knows how to handle welding to make such a design himself.

The video will show you how to secure the tool in the garage, correctly place different shelves, racks and other equipment to ensure convenient use of it. Convenient, serviceable and always at hand the necessary tool - comfort in the garage for any car owner.

A garage is more than just a place to park a car. It is also a workshop, a place of relaxation, and a club of interests. Therefore, the arrangement of the garage should be convenient and thoughtful. On no large area you need to place a lot of things, and they should be convenient to use. Homemade products for the garage will help with this. What people don’t do with their own hands. From a simple shelf to a complex device. You can make all this yourself. But you need to know how. Several ideas for modernizing a garage and a plan for their implementation are in the article.

Homemade garage: ideas for arrangement

Setting up a garage is a long process. You won’t be able to do everything right away. You have to constantly modernize, change, and create something new. In this case, they mainly use homemade products for the garage. It requires less money and it’s also a pleasure to fashion the right thing out of garbage - it’s worth a lot.

Tire and wheel storage

Every car owner is faced with the problem of storing out-of-season “shoes” for the car. Where to put the tires is a sore point. In general, the way tires are stored depends on whether they are mounted on rims or not.

So tires with rims can be hung or stored lying down - in the form of a stack, stacking them one on top of the other. To hang tires, you can use luggage straps, chains, or a metal cable with a diameter of 4 mm or more in a polyethylene sheath. Fasten the belts to the ceiling, wall, or beam located above.

Another available method is to drive pins or hooks with a small bending radius into the wall. The distance between the hooks is slightly larger diameter tires The length of the pins should be such that they do not protrude beyond the tire. You can fill them almost to the ceiling so that the wheels fit.

Tires without rims can only be stored standing up. Special shelves are made for them. They are usually welded from profiled pipes. 20*20 mm, maximum 30*30 mm. You can also use a corner. Round pipe It’s inconvenient to cook, but cross members can be made from it - the tires fit and hold up better in this case.

The width of the shelf is 4 times the width of the tire, plus a margin of 10-15 cm for some freedom. The height of the rear wall is slightly higher than the outer diameter of the wheel. The design is simple = from the side it resembles right triangle. Having it, welding such a shelf will not be difficult.

A shelf for storing tires is an excellent homemade product for the garage. This is a factory option with a completely inhumane price tag. But you can borrow an idea - the crossbars can be rearranged depending on the size of the tires... you never know. A shelf for tires in a garage with limited space. No tires - you can fold the shelf

Such shelves are usually hung on the wall. But the place must be chosen so that light does not fall on the rubber - this will deteriorate it. Not the most complicated DIY projects for the garage, but very useful.

Workplace

Probably the most a large number of DIY projects for the garage are related to the equipment of the workplace and tool storage systems. Moreover, this is not the only way to solve this problem. First of all, you need to decide where it will be located workplace. There are three options:

The entire width of the far wall. If the garage is of sufficient length and it is possible to “steal” about 1.5 meters. The advantage is that everything is located compactly, at hand, and does not interfere with walking along the car. The disadvantage of this solution is that you have to carry tools far away if work is carried out outdoors.
Tabletop and many drawers. The main thing is to remember where everything is
Along one of long walls. This arrangement is chosen if the garage is wide but not long enough. It makes sense to place the table and workbench to the left of the entrance - on the driver’s side. But this is not critical. The disadvantage of this arrangement of the workplace in the garage is that you have to move with some caution, but it is more convenient to bring/take out tools outside.
The main thing is to place the tools correctly
Occupying one of the corners. This is an intermediate option. Moreover, one of the sides can be made longer, the other shorter.
Placing a desktop in the corner of the garage and placing a sofa next to it is not a solution to the problem. Occupying two adjacent sides is a great idea.

A table or workbench for a garage is made of boards and covered with plywood. Inexpensive, quite reliable. If there welding machine and checking skills, you can weld a frame from a corner or profiled pipe. Again, it is better to sheathe it with moisture-resistant plywood. The result is a smooth, abrasion-resistant surface. You can, of course, use it, but the laminating layer is quickly damaged.

To prevent the space from wandering around, you can install shelves or make drawers under the countertop. Boxes are more convenient, but making them is still a hassle. It is quite possible to make shelves and put boxes made of plywood on them. Plastic boxes and baskets are also suitable. But the walls must be thick.

There is, by the way useful idea— make a rack for storing tools from used canisters. Find ones that have the handle on top. Then everything is simple - one of the sides is cut out and in the future this canister is used as a box.

It is not necessary to make a whole rack - it’s still difficult to remember where and what is located. But you can use the same principle to make drawers for shelves. By the way, you can stick inscriptions or pictures on the ends (with pictures, identification is faster). Such homemade projects for the garage bring satisfaction - create useful thing out of the trash - a pleasant feeling.

Tool storage

The most difficult task is organizing tool storage in the garage. We need to make sure that everything is in order, but at the same time, is at hand and in sight. Moreover, closed boxes are only suitable organized people, who always put the taken thing back in its place. Otherwise, you will constantly rummage through drawers, forgetting where everything is. There are several ideas for convenient storage of small items and tools. This is completely simple homemade products for the garage.

A simple solution will help you quickly solve the problem. metal grid. A reinforcing mesh made of 2 mm wire, a 10 cm cage, is suitable. Attach it to the wall, bite off some rods, bend them, make hooks, crossbars, etc. out of them. You can buy special hooks that are attached to the mesh (available in stores that sell commercial equipment); ordinary double-sided hooks, which you can buy or make from wire, are also suitable.

A grid on the wall is a way to quickly organize tool storage

It is convenient to store screwdrivers on a special shelf. Take a board or plywood, 10-15 mm thick. The board must be sanded well so that there are no splinters. Then drill holes of different diameters in one or two rows in the plane. If the board is wide enough, you can make larger holes for chisels or even hammer handles. Clean all the chips again. Now we need to come up with a wall mount. You can use a regular bracket. Screwdrivers, chisels, and other similar materials are inserted into the holes. Convenient, fast, everything is in sight.

There are also useful homemade products for the garage that allow you to organize the storage of hand tools. Pliers, pliers, wire cutters, etc. placing it conveniently is problematic. Can be hung on a net. It’s convenient to remove, but not to hang. But there is a simple solution - attach a narrow board and put the tool on it. To make it sit comfortably, grind down the board on one side. When cut, it should look like an isosceles triangle.

Another simple storage idea battery tool, chargers and spare batteries for them. Make a shelf as in the photo above. In the lower part, cuts of different formats are made, and the upper parts are used as regular shelves. The idea is that everything is in one place, quickly taken out/installed in place. These garage DIY projects will make your workspace comfortable. It will be easy to maintain order.

Homemade carriers for the garage

Even with very good lighting in the garage itself or on the street during the day, under the bottom of the car, visibility is very low. To illuminate the front of the work, portable lamps are used. These are the simplest DIY projects for the garage. With them you can begin the epic of arranging and equipping your garage space.

In the very simple version This is a socket attached to a wire and can have a small shield with a hook attached to it. This is such a simple thing. The light bulbs used are ordinary ones - incandescent or economy ones with a standard socket. Everything is not bad, except that these light bulbs break very often, you need to figure out how to hang them so that they shine in a specific place. In general, the design needs improvement. There are several modification options.

Unbreakable lamp socket

This plastic bottle lampshade perfectly protects the fragile bulb of an energy-saving lamp. Can also be used LED lamp, but incandescent will not work - it heats up too much. The design is simple - a cord with a plug and a cartridge at the end.

The main task is to find a plastic vessel with walls made of translucent milky plastic of medium thickness. Transparent will not work - it will not scatter light, too thin walls will not save the lamp from impacts. After you have found a suitable vessel, some small change remains:

Everything is simple, but such a lamp allows you to brightly illuminate exactly the desired area, the rest of the space is filled with even light that does not hurt the eyes.

Carrying LED Recessed Light

The simplest and most common homemade products for the garage are portable lamps. Without them, it is inconvenient to work not only in, but even just on a workbench. Need a flat built-in LED lamp, which can be switched on at 220 V. These models are called “tablets” because of their shape. You also need a cord with a plug, a piece plastic window sill- to install a lamp. The window sill piece should be larger in size than the lamp. You choose the specific sizes yourself. The next steps are:

All, homemade carrier ready. This option is for floor installation. The movable leg allows you to change the angle of inclination. To make it turn over less, you can attach a couple of weights inside the body (in its lower part).

Attach the carrying cord to the ceiling

Convenience comes from little things, and very simple homemade products for the garage help with this. For example, you can remove the cable from a portable lamp that always gets tangled under your feet. Carrying is usually done with a cheap cable. It is not the most flexible, does not fold well, and its coils on the floor get under your feet. In general, it is inconvenient to use. You can protect yourself and carry it by hanging the cable from the ceiling. The solution is simple but very effective.

You can make this “suspension” to the ceiling for carrying with your own hands in an hour

Two anchors with a ring at the end.
Cable tie.
Clamp clamp.
Metal cable. The length depends on the size of the garage - it needs to be from one wall to the other.
Steel/plastic rings or steel wire and a piece of pipe to make these rings.
Carrying with a long cable - its length is approximately double the length of the garage.

The cable is stretched along the long side of the garage. It’s more convenient - not far from the “working” wall, where the workbench or other equipment is located. A little work:

Well, that's all. You can use it. With such a device, the carrier can be carried to any end of the garage without the cable getting tangled or caught. Convenient, takes little time.

DIY garage compressor

A compressor is needed in any garage. And, by the way, this is not the most difficult homemade product for the garage. A low-power compressor for the garage for inflating tires and other small jobs can be made with your own hands from auxiliary materials. For example, from a compressor from a refrigerator. For this you will need:

refrigerator compressor;
a sealed cylinder with thick walls (you can use a fire extinguisher flask or a small gas cylinder);
safety valve at 8 atm;
pressure gauge;
fitting;
oxygen hoses with couplings (select the length based on the size of your spare parts);
base for the compressor - a thick board or piece of plywood will do.

In order not to pump any nasty stuff into the tires, it is advisable to also install a filter to separate oils, dust and other contaminants. Scheme homemade compressor shown in the photo.

The compressor must have a starting device. We plug it into the network, see which tube the air is sucked into, and mark it. You can put a car filter on it - clean air will be pumped in.

We assemble an oil separator receiver from a cylinder and a safety valve. To do this, we cut two fittings into the cylinder - for air inlet and outlet. We place a safety valve on the inlet hole and connect the compressor outlet to it using an oxygen hose.

We install another automobile oil filter at the outlet of the oil separator receiver to completely remove the oil. We connect the filter to the pressure gauge, and from it comes a hose, which is connected to the tire through the appropriate adapter.

Assembly is complete. But in order to carry this device comfortably, everything needs to be secured in some way. You can weld the frame to size, attach wheels and a handle for easy transportation. One of the compressor options for inflating wheels is described in the video. There is no receiver, but it performs its functions oil filter. You can do it this way, but with a receiver the design is more reliable.

Since the compressor in the refrigerator is low-power, it may take a long time to inflate the tires. You can make it more powerful by installing two compressors that will start simultaneously. Accordingly, the pressure will build up twice as fast. But such an installation requires a more robust security group. Such homemade products require a little more equipment, since the circuit is still more complicated.

Good day, brainwashes! A workshop when it is in disarray is not a workshop at all. And this article is devoted to the topic of “organizing” the tool, in which I collected 9 not quite usual ways storing handy tools for your brain workshop. I guarantee that they will fit any instrument that has ever existed on planet Earth!

In the fall of 2015, I created The Ultimate Magnetic Pegboard, but as time passed and I acquired even more tools, that meant I needed another one. homemade for organized storage of this very tool. In this brain leadership I'll tell you about some of the devices with which I equipped the new board with the tool.

So, let's go!

Step 1: Is the kitchen towel dispenser not a clip holder?

My grandma gave me a paper towel dispenser and I decided to put it to use. The stem of this dispenser was plastic and did not support the weight of the clamps, so I replaced it with a metal guide from the old one brain printer, which I cut to the length I needed* and using epoxy resin I glued the mounts to it on the sides.

When mounting this resulting clamp bar onto the board, I used small wood spacers to create more space and make it easier to remove/engage these clamps. Please note that the clamps are quite heavy, so the more screws you use when attaching the crossbar, the more secure it will be.

Honestly, this method of storing clamps is much simpler than all other options for clamp bars.

* I cut the guide almost half as long as I needed, so that there was room for others brain clamps which I plan to purchase in the near future.

My kitchen towel dispenser bar holds:

3 15cm clothespin clips
10cm clamp
5cm clamp.

And there is room for many more to come soon!

Step 2: What about zip ties and not holders?

Tie ties have a wide range of uses, so why not use them as holders? I drilled a couple of holes in the storage board, threaded a clamp through them (the size of which depends on the size of the tool that is planned to be placed in it), tightened it from the back of the board and inserted the tool. It's simple!

So brain way You can store a soldering iron, a drill and much more! If you plan to place a heavier tool (for example a drill) this way, then it would be more advisable to use a metal clamp.

With the help of “clamp holders” I store:

large metal tweezers (because they don’t “stick” to the magnet)
small plastic tweezers.

Step 3: What about the heatsink?

This idea came to me in November 2015, and I implemented it to accommodate my plastic tweezers by mounting this holder directly on the wall above the Magnetic Board. I attached via double sided tape radiator so that its fins were vertical, and hung tweezers on them, with some fins acting as dividers!

I “obtained” this radiator from my game console, about which there is even a whole brainstorming.
My “radiator” holder contains:

5 different plastic ESD tweezers.

Step 4: Magnets in action!

I'm assuming you've already seen my Ultimate Magnetic Pegboard, if not, I encourage you to check it out!

And in my new tool storage board, I also used magnets, “mined” from the speakers, which I glued to it with hot glue. This type of holder is quite easy to make, you just need to understand in what place brainboards each instrument will be placed.

With the help of my “magnetic” holders the following can be stored:

large roughing plane
small roughing plane
large needle nose pliers
wire cutters
flat needle nose pliers
curved needle nose pliers
regular needle nose pliers
carpenter's punch.

Step 5: Don't forget about screw-in straight hooks

Of the screw-in hooks, I prefer those bent at a right angle; they better hold a massive tool, for example, the large rasp with a massive handle shown in the photo, but even its size does not help rounded hooks hold the rasp.

But straight hooks make it very easy to store your tool, try this one brainpower and find out what we are talking about!

This is not visible in the photo, but I also screwed in the hooks from the bottom, as “locks” that prevent the saw from falling out, no matter what.

My “hook” holders hold:

brushes (no, I don’t paint, they serve me for something else)
large rasp
big file
hacksaw
and my microscope- homemade .

Step 6: And the foam will come in handy

You may not believe it, but I used foam to store the drill bits. It is very soft, lightweight and easy to cut, making it great for storing small tools, such as drills, needle files, small screwdrivers, pencils, etc.!

About how I built a foam drill holder I created a separate brainstorming.

A similar storage device can be made from wood, while the foam will serve good material for a prototype like this crafts.

Step 7: And of course small shelves!

A device called the “French plank” is certainly “cool”, but to my regret, I do not have the opportunity to do this.

So I decided to attach the board to the storage board at a 90 degree angle using small corners.

On my “mini-shelf” are placed:

my homemade magnetic silicone pads for the vise jaws (because I decided not to use them on the vise anymore)
two different sharpening stones
nail cutters (although tin snips may be better for this purpose)
multitool the size of a credit card
flashlight in the form of a telephone.

Step 8: Even a toilet paper roll has a use!

I have to admit, the idea is really strange...

I cut a hole in the paper roll, then cut it in half and attached it to the board.
I now use this device only for storing my mallet - homemade products, it weighs little and the “paper” holder only bends slightly. Obviously, this method will not work for a heavier instrument...

Step 9: Another “mini shelf”, but with holes

To create this brain holder I was inspired by one recently.

As soon as the owner of the house decides that it’s time to hang up the flower shelf that his wife has been reminding him so persistently for two months, it turns out that necessary tools gone somewhere. The situation is familiar, because usually hand tools, all these keys, hammers, screwdrivers, are stored so as not to be seen. We don’t use tools every day, of course, but the storage system needs to be organized correctly so that later we don’t have to look for, for example, a 12 key.

Storage options

Let's immediately decide that we will talk specifically about a workshop, which can be set up in a garage, a separate shed, summer kitchen, on a fairly spacious loggia or balcony. There are usually not many tools in the apartment, and the existing screwdrivers, hammer and pliers can be put in a specially designated box or bag, which can take place on the mezzanine or in the hallway.

If there are noticeably more hand tools, they need their own separate corner, in which you will have to put things in order. The main condition is that the place where the tools are stored must be dry, because metal parts They don't like moisture.

There are many benefits to a well-designed storage system. You will always know exactly what is and where it is, you won’t have to look for anything. If the tools are always in their place, you will remember in time that a month ago you gave your neighbor a nail puller that he needed for literally an hour. In addition, correctly positioned tools take up less space in the workshop, freeing up space for work.

First of all, you should decide whether you will buy ready-made shelves for tools, a metal mobile cabinet with drawers, or set up a workshop with your own hands from scratch. Let us immediately note that ready-made systems storage for hand tools is not always 100% suitable; they often have to be remade to suit your needs.

Let's look at a few ideas for self-organizing the storage of hand tools in the workshop.

1. First of all, you should take care of the little things: nails, screws, bolts, which tend to get lost and scatter throughout the room. For their storage, you can adapt ordinary plastic bottles with the necks cut off, you can immediately see what is where. Small plastic boxes are also suitable, which are best labeled, noting that, for example, there are nails of a certain size here. It is convenient to place such containers for storing small items on a shelf above the desktop so as not to clutter it. But glass jars should not be used in the workshop. There are too many heavy metal objects that could accidentally hit such a fragile container.

2. Magnet. Real craftsmen usually have a large magnet on their work table, to which small metal tools can be successfully attached. Now there are special magnetic surfaces and holders on which you can conveniently and simply store many tools and parts.

3. Plywood panel - the choice of old-school craftsmen. From pieces of bars on such a shield you can create an entire storage system that will not take up much space and will allow you to place almost all hand tools. The costs for such storage areas are minimal, and everything will be done according to the needs of the master.

4. You can also buy a ready-made metal sheet with holes for tool holders. However, you can do this yourself. On ordinary nails or self-tapping screws, saws, keys, and other tools with special holes in the handles are hung in the required order.

5. It is convenient to allocate separate storage for screwdrivers, for example, a regular school stand for pencils and pens.

6. Plastic boxes with compartments, which in the kitchen are usually used for forks and spoons, can also be adapted for small hand tools.

7. If you don’t really want to build panels and make shelves, you can move an old sideboard or buffet to the garage workshop. It has a lot of shelves and drawers where many tools can fit. The main thing is to lay everything out yourself so that you know exactly where it is stored. garden tools, and where - carpentry.

8. For drills and bits of a certain size, it is better to buy a ready-made cradle - an insert with tools. Or drill holes in wooden beam, where the drills will go. And sign - 3, 4.5, 9 and so on, so you know right away right size cutting tool.

9. When arranging storage areas in the workshop, you should take care of safety, especially if small children can get into the room. In this case, it is better to hang stabbing and cutting tools on the wall higher, and chemical liquids to be securely locked in a cabinet with lockable doors.

10. A free-standing rack with holders for long handles of shovels and hoes is perfect for garden hand tools. Of course, you can just lean them against the wall, but remember the proverb about the same rake?

We state that organizing a workshop is not so difficult, it’s enough simple ideas a lot of. Just prepare yourself for the fact that one time you will have to tinker in the garage a little longer and make an effort, but then there will always be strict order in your workshop and there will definitely be no problems with finding a “cross” screwdriver.

Almost all men living in their own apartment, and even more so in a private house, dream of creating at least a small workshop with a set of necessary tools. But quite often, due to inexperience, beginners simply do not know where to start. Therefore, the question arises - what tools are desirable to have on hand in the first place. And secondly, how to organize a workshop with maximum ergonomics, conveniently placing everything you need in it.

Let's try to provide all possible assistance. Today's topic: home workshop - optimization of space and convenient storage of tools. Some recommendations will be given and shown successful examples. Well, you’ll have to figure it out and “adjust” it to the existing conditions yourself.

Tools needed for home

Even if the owner of the house is not a big fan of working in the workshop, you still cannot do without a certain set of tools on the farm. Therefore, in order to always have everything you need at hand, you should make a list and start purchasing tools. Sooner or later they will definitely come in handy both in an apartment and in a private house. It is clear that only people with a fairly high income can afford to buy the entire set at once. Usually the “arsenal” is formed over several years, and you can start with the simplest things.

By the way, even if a woman begins independent life, there should also be at least some tools in the apartment. But the list of “female recruitment” is much more modest.

In construction stores you can find ready-made universal tool kits. Perhaps they are suitable for those who use them only in extreme cases. In addition, often the instruments they contain are not of high quality. And most often home set and consumable parts for it are acquired gradually.

So, in order not to run around the neighbors in search of what they need, each owner should have the following tools:

Illustration	Functionality
	A hammer with a metal striker (head). There is absolutely no way without this tool. It would be nice if it was a claw hammer, that is, two tools in one. Hammers with a rubber or wooden striker are also available for sale, but they have a specific purpose and are rarely used in ordinary household work. It is recommended to choose a tool with a high-quality wooden or modern polymer handle with rubberized grips.
	A set of screwdrivers, which includes tools with different tips. The main ones are cross and flat. The purpose of screwdrivers is to screw in and unscrew self-tapping screws, screws, screws. It is advisable that the kit include at least three screwdrivers of the main types of different diameters. They will be necessary for working with both small and large fasteners. The length of the metal tip of screwdrivers can also vary. For example, for hard-to-reach, recessed areas where you need to drive a self-tapping screw, you will need a long screwdriver. For work carried out on a work table, it is more convenient to use a tool with a short tip. Additionally, a tool is selected for specific purposes. For example, it would be good if the kit included an indicator screwdriver. It is necessary when carrying out electrical installation work, to check voltage, phase arrangement of wires, etc.
	Pliers (nippers, pliers). For homework the best option will universal option This tool combines both pliers and wire cutters. The former will help to clamp and hold an object, while the latter will easily cut a wire or wire. The handles of the pliers must be insulated so that, if necessary, they can also be used for electrical installation work. This tool is also necessary when carrying out metalwork and carpentry work.
	A set of wrenches is required when working with threaded connections, including hex bolts. The set should include wrenches of different sizes corresponding to the standard sizes of nuts and bolts. Wrenches should be in every set of household tools, as with their help you can quickly tighten the fastenings of a sofa or chair, table and bedside table, etc.
	Adjustable wrench - this tool, in principle, can replace a whole set of wrenches. Without it, it can be difficult to handle plumbing repair tasks. We remember that the key is quite large and quite massive, so it is not always convenient for them to work. However, it is unlikely to help if it is necessary to unscrew a rusted bolt. So it should rather be in addition to a set of wrenches, but not as a replacement for it.
	Hacksaw for working with wooden parts will be necessary when carrying out renovations in the apartment. In a private home, you can’t do without it at all, since you have to carry out a lot of everyday operations, for example, pruning trees. In addition to it, it’s a good idea to have a two-handed saw on hand if firewood is used on the farm.
	A hacksaw will allow you to cut a pipe, a metal rod, a thick cable, sheets of metal of small thickness, etc. Most often, the need for this tool arises among owners of private houses. When purchasing this type of hacksaw, you must immediately buy consumables - blades, as they break quite easily.
	An ax will most likely be necessary for a private home, as it is used during construction, repairs, and also for chopping firewood.
	The construction level is useful both for an apartment and for a workshop in a private house. It will help to achieve perfect evenness when hanging shelves or pictures, setting floor joists, masonry work and in many other cases. Depending on the purpose, its length is selected. For example, for small apartment work, a short version (400 - 800 mm) is suitable, but for arranging floors or leveling walls, a long tool is more suitable.
	A measuring tape is always useful both in the house and in the apartment. For example, to purchase flooring, carpet or other objects and materials, it is necessary to measure the dimensions and calculate the area on which they will be laid or installed. For apartment needs, a tape measure 3÷5 meters long is suitable. For a private home, and even more so for taking measurements on personal plot, it is better to purchase a ten-meter one with a soft ruler.
	Electric drill. This tool is a necessity in any home these days. In an apartment, especially if it is in a panel house, you cannot do without a drill when hanging cabinets and installing some plumbing accessories. To drill solid walls, it is better to purchase a device equipped with an impact function. For the drill, you must immediately purchase a set of drills of different sizes for wood, concrete and metal, so that it is equipped for all occasions.
	A screwdriver is an indispensable thing in the home workshop that will help you quickly tighten a self-tapping screw or screw, or drill a hole in wood or metal. Using a screwdriver will make it much easier to make a shelf or repair pieces of furniture. Therefore, every homeowner should have this tool. In the kit with the screwdriver, you need to purchase a set of bit holders and the bits themselves of various types.
	An electric jigsaw will also become an indispensable assistant for repairs or making useful things. It will significantly speed up the work of preparing material for wall cladding, cut thin slats, timber, thin logs and branches into garden plot. When making furniture yourself, you can use a jigsaw to cut sheet materials to create complex curved shapes. Having a jigsaw, you can often avoid buying hacksaws for wood and metal. But you should immediately purchase a set of files for different materials.
	A grinder or “grinder” is most often required for a private home, as it is intended for sawing materials that have a hard structure. It is used to cut slate, cut and polish metal. It is also suitable for cutting ceramic or even paving slabs. It often becomes indispensable for a car enthusiast in the garage.
	A caliper is a device that allows you to accurately measure products - their diameter, width, depth of holes, etc. On sale you can find a regular instrument or a digital version.
	A rechargeable flashlight will sooner or later be needed in any home, so it should always be kept charged. For example, the lights in the apartment suddenly went out or there was a leak under the sink, and it is urgent to find the cause of the accident. In a private home it is generally difficult to do without a flashlight, and its application has a wider range.

This table presents only the basic tools that should be present in the “arsenal” of any homeowner. Of course, everyone decides for themselves which ones to include in their home toolkit, and which ones can wait a while.

If the master’s hobby is electronics, jewelry, wood carving, making metal or wooden equipment for summer cottage or other directions, then you will need special tools designed for a specific type of work. But such craftsmen and special advice not required. They themselves can give their recommendations to anyone.

Organizing a workshop and storage areas for home tools

A well-equipped workshop, with conveniently located tools and necessary consumables, is the key to fruitful, high-quality work

In a private house, usually even during its construction, the owner allocates a place for a workshop in advance. Or he organizes it in an outbuilding or garage. It is more difficult to allocate personal space in an apartment. But if it has a spacious storage room, balcony or loggia, then those who like to make things will immediately “occupy” this territory.

Some craftsmen limit themselves to a reliable table and purchased plastic organizing containers for storing tools. Others, showing ingenuity, come up with various cabinets, shelves or stands. They take up minimal space and do not clutter up even small rooms.

Setting up a workshop on the balcony

If the workshop is set up on a small balcony or loggia, and it is planned to be used year-round, then a number of measures must be taken. First of all, to create a comfortable environment in a room during the cold season, it must be insulated.

Insulating the balcony significantly expands the functionality of this room!

Cold balconies or loggias are not used in winter, and often gradually turn into a warehouse of unnecessary rubbish. Why not turn it into an all-season space? – read in a special publication on our portal.

The second task, without which the workshop will be incomplete, is supplying electricity to the room and installing lighting fixtures.

When the room is completely ready, you can move on to planning your workspace. The plan, of course, will depend on the configuration of the balcony. As a rule, this is a very small area, often having a width of only 1200 mm. However, even within such limits, the craftsmen manage to arrange everything necessary for comfortable work.

The main thing in the workshop is a reliable and durable workbench. It is equipped with a thick tabletop that can support the weight of tools. Loads when applying forces during work must also be taken into account. The table must be well lit, so when laying the wiring, this must be taken into account.

Prices for tool boxes Plastic Cenntre

Tool box Plastic center Blocker

To store tools, shelves are attached above the table. And under them on the wall you can install metal hooks or other devices for convenient placement of small hand tools. There are quite a lot of such ideas, and they will be discussed in a separate section.

The main tool that is used most often is installed on the table. If it is large enough, then it should be placed so that there is room for other work.

Great option, which will help save space and allow you to keep all your tools in order, is a transforming cabinet. Such a cabinet involves the use of not only its main space, but also doors. Horizontal jumpers are fixed to the sashes, which are not only stiffening ribs, but also functional shelves.

The set with the cabinet also includes a work table, which is mandatory for the workshop. In the example shown above, it has a foldable design. However, the tabletop and its support must be reliable.

The cabinet opens and the table unfolds only when any work is planned to be done. The rest of the time it is compactly located near the wall.

The design of the cabinet is simple. It is assembled from timber and plywood different thicknesses. Therefore, it is quite possible to make it yourself to the specific dimensions of the available space. If this is not possible, then the cabinet can be ordered from an experienced carpenter, providing dimensions taken from the site of its intended installation.

Don't forget about the space created under the table. There can be quite a lot of space for arranging closed and open shelves. To maintain a neat appearance of the workshop, you can install the above-mentioned plastic containers with tools on the shelves under the table.

Another option for expanding your workspace. We are talking about installing mobile cabinets and racks with tools under the table. Naturally, such pieces of furniture will have to be adjusted in terms of parameters to the height and width of the table. An extended cabinet immediately increases the area of the workbench, since its surface can also be used for work.

If the space on the balcony is completely limited, or there is none at all, then a wall cabinet is suitable, which can be placed even in the hallway. The photo shows two cabinet options. One of them has a door made of solid plywood, and the second one has a door made of perforated plywood. Thanks to the holes in the door leaf, you can attach some tools to it using hooks. However, this model can hardly be hung in the hallway. A solid door will completely hide the contents of the cabinet, and its surface can be disguised, for example, with a mirror. Notice the many drawers in the closet. An excellent place to store various sorted “trifles” and fasteners.

Setting up a workshop in the garage

Another place where a workshop is most often organized is a garage. This is understandable, since the machine requires periodic maintenance, and a large number of tools are placed here. Therefore, it is easier to combine everything you need in one room.

If the garage is wide and long, then shelving can be placed along the far and side walls. This layout results in a spacious work surface and large space underneath it. Everything you need can easily fit here.

In order to safe operation both the workshop and the garage itself, it is recommended to make floor racks, as well as hanging stands from non-flammable material. If for production wall shelves If wood is selected, it must be treated with a fire-retardant impregnation.

If the garage is not wide enough, there is still enough space along the back wall to organize a workshop with a work desk and numerous cabinets. The only thing that needs to be considered for any garage workshop is the intensity of lighting. Such a building, as a rule, lacks windows that let in natural light. And we have to compensate for this with electric ones.

If there is no desire or opportunity to stretch tool racks over the entire length of the garage, you can use the idea of a retractable shelving design. Moreover, if you correctly place the retractable panels, then in combination with them it is quite possible to organize a work surface. When the panels are moved to one side, a fairly spacious and reliable table top is revealed, allowing the necessary work to be done.

To create such a structure, you will need panels, for example, from MDF. You can perform perforation - this will significantly reduce the weight of the panels, and the holes will be useful for fixing tools. Small wheels are attached to the top and bottom sides. In addition, guides will be needed to ensure free and smooth movement of the panels. They are fixed on the desktop and on the ceiling. Or on the shelf provided above the workbench, which will also not become superfluous.

If the garage is not only narrow, but also short, and it is necessary to organize a workshop in it, then suitable option folding table. When not needed, the tabletop of such a workbench slides down along the wall. Well, you can place a stand above the table or hanging shelves with a tool. The garage space will be significantly saved, and the countertop will not interfere with placing the car in the garage or performing certain maintenance work on the car.

The option of placing tools on stands mounted above the desktop is convenient because everything you need will always be in sight. Thanks to this arrangement, you don’t have to look for the necessary consumables or, for example, a wrench or a screwdriver required size. The stands have boxes with compartments for bolts, screws, nuts and other small elements. Moreover, for convenience, the boxes are located at a slight angle - their contents are immediately visible.

The upper shelves, which have greater depth, can be used for storage electric tool, and for various compositions, also necessary to perform certain types of work.

This arrangement of the work area can be organized both in the garage workshop and on the balcony.

The option of a compact but spacious cabinet is ideal for small room garage. And that's all necessary tools And Consumables distributed very ergonomically. The upper part of the cabinet is reserved for storing medium-sized tools. Its lower part is a kind of chest of drawers with numerous narrow drawers. Thanks to the correctly selected height of the drawers, order will always reign in their cells, since each item stored in them has its own place. When drawing up a design for such a cabinet, you must immediately plan in which drawer what will be stored. Depending on this, choose the height of the sections. Well, even a novice home carpenter can make such a cabinet.

The mobile version of cabinets or carts for tools solves many problems. This allows you to use them in different places in the garage, as well as in the yard. Such convenient devices do not take up a large area, and thanks to fairly large wheels and specially designed handles, they are easy to transport. At the same time, they contain many of the necessary heavy tools.

The mobile cart can be purchased ready-made, as they are presented in a fairly wide range. But it won't be cheap. Therefore, it is best to draw up a drawing and make it yourself from timber and plywood. And powerful wheels are easy to find in a furniture hardware store.

Useful little things when setting up a workshop

This section presents some ideas from readers that will contribute to the optimal organization of the workplace. Many of them will have virtually no effect on the family budget.

A great way to save space and always have consumables in sight is to keep them in clear plastic containers shaped like jars. You can buy them ready-made or use containers left over from various products to make them. Some workshop owners use glass jars instead of plastic containers, but they must be handled with extreme care. The principle of their fastening is as simple as possible - the covers are screwed from the inside with self-tapping screws to the bottom surface of the shelves or wall cabinets. And it turns out that these surfaces also become functional.

Another approach can be taken. The side of the plastic cans is cut in half to the neck, which should remain intact. In this case, the lids are screwed not to the bottom, but to the side surface of the wall cabinet, which is also rarely used for storing tools. You get open containers-bowls for all sorts of small things. An example is shown above.

If you don’t have any plastic cans at hand, and glass ones don’t inspire confidence, then you can use bottles from drinking water, which will definitely be found in every home. A hole is cut out in their upper part, convenient for removing the parts stored in them. Rings are screwed into the caps - for the convenience of hanging bottles on hooks or even on hammered nails.

There is usually no shortage of cans in the garage, and they can be plastic or metal. Any of them, unnecessary or unsuitable for direct use, can be put to good use. And evidence of this is the large number of ideas for using them. For example, if a good-quality steel or aluminum canister has been damaged and can no longer be stored in liquid formulations, don’t rush to throw it away. This container will make a reliable and convenient container for storing and carrying tools. To make it, just carefully cut out the side of the canister. Then, secure the edges of the cut with a rubber sealing pad, secure the hinges and lock. And the internal space is divided into cells using plywood partitions and shelves. This container can be used to store some tools in the garage, in the trunk of a car, or on the balcony.

Depending on shape and size plastic canisters, from them you can assemble drawers for a cabinet, rack or cabinet. The main thing is that you don’t have to spend a lot on plywood and boards. And there is no fuss with assembling numerous boxes.

It is enough to cut out one of the sides of the canister, leaving the handle and lid intact - and the container is ready. Depending on the size of the parts you plan to store in this box, the size of the canister is also selected.

Many owners of home workshops have appreciated the convenience of magnetic strips on which bits for screwdrivers, drills, screwdrivers, scissors and other similar tools are stored. The ease of use lies in the fact that you don’t have to search for, get, and then put back the tools. They can be easily removed and then reattached to the magnetic strip without much distraction from the work in progress.

Prices for FIT tool boxes

Toolbox FIT

If you have magnets (and you can find them if you want), then making such an improvement to your workplace is a piece of cake. You can look for ready-made magnetic shelves in furniture fittings or kitchen utensils stores.

But such a device for storing pliers, screwdrivers, scissors and other tools can be made by any owner who is starting to organize a workshop. To do this, you will need sections of ordinary polypropylene pipes with a diameter of 20 to 32 mm. The cost of such pipes is low, and in addition, they can remain after repairs. The pipe is marked and cut into equal sections with a 45 degree bevel to one side. Then the location of the holders is also marked on the wall or board. After this, the prepared sections are fixed according to the markings using self-tapping screws through the protruding beveled edge. Instead of pipes, sections of durable reinforced hose can also be used. Fast, cheap, neat.

* * * * * * *

There are plenty of other ideas for arranging a workshop and placing tools in it. If you want to introduce innovations to your existing place of work, or finally start organizing it, then you can use the examples presented above. You can also approach the process creatively and use items that have been lying idle for a long time to create convenient devices. After all, in every garage or shed you will probably find something that is a pity to throw away, but there is no way to find a use for it. We will be glad if you share your improvement proposals on the pages of our portal.

In conclusion, there is a video in which the master shares his experience of creating convenient system storage of tools in the workshop.