How to wash off tape. How to remove tape marks from different surfaces
September 17, 2016Specialization: facade finishing, interior decoration, construction of cottages, garages. Experience of an amateur gardener and gardener. We also have experience in repairing cars and motorcycles. Hobbies: playing the guitar and many other things that I don’t have time for :)
Often, home craftsmen close frames or even glass during repairs by sticking tape on them. This decision allows you to protect the window from dirt, however, over time, removing the tape and, even more so, the remaining glue after it is not easy. To help with this task, next I will tell you how to remove tape from plastic windows the most effective folk methods.
Traditional methods of removing tape
First of all, it must be said that the longer the tape remains on the windows, the more difficult it is to get rid of it. Moreover, as soon as you tear it off, do not leave cleaning the surface of glue “for later.” The fact is that the glue will become dusty and will look like dark spots, and over time it only becomes more difficult to remove, which I understood from personal experience.
There are many different folk tricks for removing adhesive tape, however, the following methods are proven and most effective:
Method 1: Using an eraser
An eraser can remove traces of adhesive tape and glue from a frame or glass in the same way as a pencil from paper. The only thing is that the elastic band must be new and preferably as elastic as possible.
It should be noted that The eraser can handle even very old tape marks. However, this method has one serious drawback - if the area of contamination is large, then it turns into a lengthy and rather labor-intensive job.
Therefore, it is advisable to use an eraser only in cases where a small area is dirty. Otherwise, consider another, more best option how to remove old tape.
Method 2: scraper
If the adhesive tape was glued to the window relatively recently, you can remove it using a scraper for cleaning glass and ceramic surfaces. Working with this device is carried out as follows:
- use a scraper to pry up the edge of the tape;
- then pull the edge. If you feel that the film begins to tear, pry it again;
- after removing the tape, the remaining adhesive should be scraped off with a scraper as much as possible;
- If necessary, additionally wipe the window surface with detergent. Below we will take a closer look at how to wash off glue residue.
Housewives often get rid of tape and glue residues using a blade. This method is also effective, however, you must work with the blade very carefully so as not to scratch the plastic or cut yourself. It is advisable to use it only for cleaning glass.
Method 3: household hair dryer
A great way to remove old tape from windows is to warm up the contaminated areas with your hair. This is done as follows:
- heat the contaminated area evenly, causing the glue to soften;
- then wipe the contaminated area with your own hands using a rag or paper towel, if necessary, you can also use a scraper. For best results, use detergent. During operation, the contaminated area must be periodically heated.
If you have a steam generator, then it is better to use it, as it copes with the task more effectively than a hair dryer.
Dignity this method is that it allows you to remove even glue ingrained into plastic. In addition, in this way you can even remove traces double sided tape, which, in addition to acrylic, in its adhesive composition contains rubber and other components that “deadly” eat into plastic and other surfaces.
Method 4: vegetable oil
Another common and effective remedy is vegetable oil. Moreover, you can use any oil - sunflower, mint, etc. The surface cleaning process in this case looks like this:
- Before you clean the tape from a plastic window, you need to lubricate the contaminated areas with oil;
- periodically wipe the contaminated areas with a cotton swab for an hour;
- When the tape and traces of it are completely removed, you should wash off the oil from the surface. To do this, you can use dishwashing detergent.
The smell of the oil will remain in the room for some time even after you wash it off. So use better than oil that smell nice. Eg, excellent option is an essential citrus oil.
Option 5: medical alcohol
Now let's look at how to wash tape from plastic windows with medical alcohol. For this we need 95 percent alcohol.
It must be said that in this way you can not only remove glue that has become embedded in the plastic surface, but also whiten yellowed plastic. The procedure is performed in the following sequence:
- Apply alcohol to the contaminated surface with a cotton swab. As the alcohol dries, it should be applied within a few minutes;
- then wipe off the contaminated areas with the same swab.
Test the alcohol on a small area of plastic first, as plastic different types and density may react differently to the effects of alcohol.
I will note that when I had to clean off the glue from the windows, I didn’t have any alcohol on hand. However, I took advantage eau de toilette and a paper towel. As a result, I was able to quickly clean large areas with traces of adhesive tape.
Option 6: Adhesive tape
As it says folk wisdom- "Fight fire with fire". If we rephrase it a little to suit our situation, it turns out that the tape can be torn off with tape. The instructions in this case are extremely simple and clear:
- Apply a new strip of tape to areas with old adhesive tape and glue;
- now the new tape needs to be torn off with one sharp jerk;
- If the first time it was not possible to completely clean the surface, repeat the procedure again.
It is more advisable to start cleaning the surface with this method, and then think about how to wipe off the remaining adhesive tape that could not be removed with tape.
Option 7: nail polish remover or other solvent
If you need to clean window glass, then you can use nail polish remover, white spirit or another solvent for this. Main - do the work carefully so that the solvent does not get on the plastic, as it can damage it.
Carrying out work with a solvent is very simple - first treat the contaminated areas with the liquid, then wait a few minutes and wipe the glass with a clean rag or paper towel. The only thing is to ensure the room is ventilated, as all solvents have a strong toxic odor.
Option 8: Special cleaning compounds
Currently, there are quite a lot of special compositions that allow you to get rid of not only tape and its traces, but also other various stickers. Let's take HG Sticker Remover as an example.
This composition is used as follows:
- If you have not yet removed the adhesive tape from the glass, and found out that this is quite difficult to do, since it breaks, then, in this case, before removing the tape from the plastic windows, pick up the edges of the tape. The area under the torn tape must be lubricated with this composition;
- after a few minutes, pull the tape and carefully tear it away from the window. If it breaks in any area, the procedure must be repeated;
- after that, apply the composition to the remaining glue with a cotton swab and wait a few seconds until it reacts with the surface;
- Now the surface can be wiped with a clean rag or paper towel.
The price of this product is about 400 rubles for a 300 ml bottle. This volume is quite enough to clean all the windows in the apartment, and there will be some left over for other occasions.
Of course, there are many other detergents that effectively cope with the task. In particular, FENOSOL and COSMOFEN 10 have proven themselves well. They are used according to the same principle - before washing the contaminated areas, the composition is applied to them, after which the surface is wiped off.
Conclusion
All the methods for removing tape from plastic windows, which we reviewed above, are quite effective. Therefore, you should choose depending on the area of the contaminated surface and its type, i.e. the glass is dirty or the plastic is dirty. In this case, perform the work carefully so as not to damage the surface of the windows.
See the video in this article for more information. If you have any difficulties in the process of removing the tape, ask questions in the comments and I will be happy to answer you.
September 17, 2016If you want to express gratitude, add a clarification or objection, or ask the author something - add a comment or say thank you!
From the article you will learn:
Regular adhesive tape or its masking analogue is often used when carrying out household and construction work.
It is a narrow or wide film tape (paper, fabric - in the case of masking tape) on which is applied adhesive composition on one or both sides.
Depending on the thickness and characteristics of the adhesive, tape can be weakly or strongly fixing, as well as instantly sticking or requiring time to set to the surface.
Unfortunately, this useful work material has significant drawback– traces after its use are difficult to remove from some surfaces. One of these surfaces is plastic, and therefore the problem of cleaning plastic windows from traces of adhesive tape is quite relevant today.
Removing glue residues from plastic frames is complicated by another circumstance - the aesthetics of the structure and changing its color should not be allowed under any circumstances. Proven methods available to every owner help to successfully cope with the task.
Method No. 1
If the tape has recently been removed from the plastic surface and the remaining glue has not yet hardened, then stick it to the stained areas new duct tape, press it down well, and then quickly tear it off. To completely remove traces, the procedure will have to be repeated several times - but this method is guaranteed not to damage the surface of the plastic. In case of failure, you can use a regular stationery eraser to erase pencils and remove the glue from the tape with its help, simply erasing it.
Method number 2
A cleaning agent that is safe for plastic windows can be prepared from available household products. Have to take regular baking soda and dilute it with water to the consistency of thick sour cream. This composition is applied to the frame and left for 2-3 minutes, and then removed with a cloth soaked in water. If the remaining adhesive tape is not cleared the first time, then the mixture is applied again. Just like the first method, this procedure allows you to effectively remove unsightly traces of glue without worrying about the loss of aesthetics of the structure.
Method number 3
If you have to decide how to clean plastic windows from tape that was removed a long time ago, and the dried glue has already become firmly embedded in the surface, then it can help neutral alcohol-containing composition: vodka, alcohol solution, colorless lotion. Soak a sponge or lint-free cloth with them and gently wipe the contaminated area. Before starting work, it is recommended to test the solution on a small area hidden from view - not all types of plastic can withstand the effects of alcohol (it may change color or deform the surface).
Read also: Round plastic windows. Description of types and capabilities
Method number 4
You can also help get rid of glue residue on a plastic window. household products without aggressive components. It is better to choose formulations in the form of a fine powder, gel or solution, since substances with large crystals can leave scratches. A sponge or washcloth is moistened with the mixture and wiped over the frame, increasing pressure in areas with glue residues.
Suitable for cleaning windows and dish gel, as well as glass cleaning spray. The spray should be sprayed onto the adhesive stain and begin wiping off after 5-10 minutes. After using the spray, the frame should be rinsed with clean water.
Method number 5
To remove stuck tape, you can use special chemicals sold in hardware or construction stores. As a rule, they are released in the form of aerosols and are convenient for work, but are quite expensive. After spraying the substance over the surface with tape, a reaction occurs that dissolves the glue, and the tape is removed without any difficulty. Remains of dried glue also quickly dissolve and to remove them you just need to wipe the plastic with a regular cloth.
Manufacturers promise that their products are safe for window plastic, but still recommend checking for no reaction to small areas before work.
Method number 6
Enough effective means for cleaning adhesive tape are considered white spirit and gasoline without impurities. They quickly dissolve the adhesive base and clean the plastic, but can also damage its surface. Not all types of frames can withstand such contact. In order to check whether such solvents can be used in your case, wipe an inconspicuous part of a small area of the window with them and watch the reaction. If after 5-10 minutes the surface has not changed color or shape, then the product can be applied to the entire window.
Method number 7
Tape and its traces can be removed from windows made of heat-resistant material by heating the frame with a hairdryer or household steamer. It is not necessary to warm up the entire window, since by pulling the detached tip you can remove most adhesive tape. The marks left after removal are heated just a little and washed off with a sponge or damp cloth.
Read also: Cracks on the plastic window. Causes and solutions
Blitz survey: Do you lubricate the fittings of your plastic window?
Poll Options are limited because JavaScript is disabled in your browser.
For non-heat-resistant plastic, there is a more gentle version of this procedure: apply a cloth soaked in hot water to the stuck tape. The material is rolled up in several layers and wrung out well. For getting desired effect, the “compress” will have to be applied to the stuck area 2-3 times. If such an influence is not enough, then use rubber spatula or a scraper.
Method number 8
In order to clean a plastic window from adhesive tape, you can also use regular liquid oil: sunflower, flaxseed, olive, etc. Apply a generous layer of oil to the surface along with the tape, and after 10-15 minutes, remove the tape or its traces with a rag or sponge. Remaining oil is washed off the frame with soapy water. If you use aroma oil instead of edible oils, the room will smell pleasant for a long time without any fresheners or deodorants.
The method is absolutely safe for any type of plastic.
Method number 9
The traditional mechanical method of removing complex stains from plastic windows has not been canceled, especially if they have existed for a long time and are strongly ingrained into the surface.
One of the options mechanical cleaning is to gradually remove the remaining tape by hand, but this work will take a lot of time and will not rid the material of traces of glue.
Another option involves using a sponge with a cleaning layer, rubber scraper and laundry soap. A rough layer of a damp sponge is soaped and the frame is wiped with it. The surface must be completely wetted soap solution, which is left on short period time (5-6 minutes). Using the sharp part of the scraper, you need to pick up the tape and gradually separate it from the window. Wetting with a soap solution is repeated as necessary.
After wiping off the tape, any remaining glue is removed by wiping the frame with the hard side of a soapy sponge. For complete cleaning You will have to make a significant effort and be patient.
Method number 10
Enough in an original way getting rid of leftover tape is using toothpaste. In this case, to the surface plastic frame Apply a layer of toothpaste and leave for 5-10 minutes. Then, the frame with the dried paste is thoroughly wiped with a dry cloth and washed with soap and water.
Scotch tape is a tape with a layer of glue applied on it. Sometimes it can be one-sided or double-sided, quickly adhesive or weakly adhesive. It's just incredible useful thing in everyday life and construction, but after working with it you can sometimes encounter some problems. The most common are traces of glue on the material or remnants of tape. Very often this can be observed on plastic windows, and in order to remove the tape from the surface, sometimes you have to try very hard.
On this moment You can find plastic in literally any room, as it is a practical and high-quality material, but cleaning with it is a lot of hassle. And to maintain the original appearance you have to make an effort. It is extremely important to approach the issue responsibly, otherwise you can cause irreparable damage to the window. But, knowing some secrets, you can easily cope with this task and not wonder how to clean plastic windows from tape.
Method No. 1
Of course, it is best to remove the tape immediately, since it will be incredibly difficult to remove the film without damaging the material. Therefore, it is much better to do everything immediately and promptly. This method can be used if traces of glue are still fresh. Place a new tape over the area where the tape remains, press it firmly, and then tear it off sharply. If you fail to deal with the contamination the first time, you can repeat the action. Or use an eraser and, following the principle of removing a pencil from paper, do the same with traces of glue.
Method number 2
For this method you will need something alcohol-based, vodka, cologne or pure alcohol will do. Soak a sponge or soft cloth in the substance, then wipe the contaminated area. But there is one important nuance: This can be damaging to some types of plastic, depending on the quality, so try it on an inconspicuous spot first.
Method number 3
Cleaners do a great job removing tape marks. Those in the form of a fine crystalline powder or paste are suitable. The substance is applied to a damp washcloth and the tape is removed using circular movements. You just need to rub very carefully, as you can leave scratches on the surface.
Gels or dishwashing detergents are also suitable; they are very easy to use and absolutely safe. Simply apply to a damp cloth.
You can also use the same product as for cleaning glass. Spray the stain and leave for ten minutes, after which you can wipe it off. Finally, wash the window clean water.
Method number 4
You can actually prepare the detergent yourself; to do this, you simply need to mix baking soda with water to make a paste, apply this mixture to the contaminated surface and leave for a couple of minutes, after which it is washed off with clean water. If there are still traces left, the procedure can be repeated. Thus, the question of how to clean plastic windows from adhesive tape can be solved quickly and using the means that any housewife always has at hand.
Method number 5
How to remove tape from plastic windows? If the material is not afraid of high temperatures, you can heat the plastic with a hairdryer or steamer. It is enough to heat only the edge so that you can grab it and carefully remove the tape, then warm the marks a little more and wipe with soapy water.
A more gentle method of heat treatment is hot compresses; to do this, you just need to heat water and wet a towel, squeeze it thoroughly so that water does not drip from it. And walk it over the tape; if necessary, the procedure can be repeated several times. Under the influence of temperature, the adhesive tape should come off, and it can be removed from the surface; if necessary, you can use additional funds, for example with a spatula.
Method number 6
How can you clean plastic windows from tape? There are also less budgetary, but more effective and convenient to use means. Modern market offers many products that are aimed at solving such problems. They are mainly made in the form of aerosols and are very convenient to use, for example, they do not flow down a vertical surface. After some time, the glue on the tape dissolves, and it can easily be peeled off from the surface. The same product can be used to completely clean the window, removing any remaining adhesive from the surface. Plus, by purchasing it, tape and any other stickers can be removed not only from plastic, but also from any other surfaces. And on top of everything else, the manufacturers promise that the composition will not harm the material itself, although they prudently ask to check the reaction in an inconspicuous area before use.
Method number 7
How to clean plastic windows from tape? You can use vegetable oil, it doesn’t matter which one, sunflower, olive or corn will do. Or various aromatic oils. In this case, in addition to good result You will also notice a pleasant smell in the room. Using a sponge or soft cloth, apply the substance to the plastic, then it should remain on it for 10 minutes, after which you can wipe it with a napkin or, using a soap solution, wash the frame. Finally, wipe with a damp cloth. This is a very gentle method that will probably not leave any damage, and also unpleasant odor.
Method number 8
One of interesting ways is to remove the tape with toothpaste. To do this, you need to thoroughly wipe the surface and remove the tape. Apply toothpaste to the contaminated surface, hold for a while, and then wipe dry with a cloth. Then wipe the entire mixture with soapy water. The bonus when using this method is that it can help you get rid of not only tape and its traces, but also scratches. Therefore, there is an answer to two questions: how to clean plastic windows from tape and how to get rid of scratches on plastic
Method number 9
Purified gasoline or white spirit can help, but these substances should be handled with extreme caution, and the product should be applied to the surface to check. Then leave for about five minutes, if nothing changes, then you can treat the surface. To do this, soak a soft cloth or cotton wool in the substance and wipe the surface. Then go over the top with a dry cloth.
Method number 10
Sometimes you may find that some windows are already covered with tape. for a long time, and nothing helps to get rid of it in such difficult case. You have to peel it off in small pieces, which ends up taking too much time and leaving the surface very unpleasant and sticky to the touch. How to clean plastic windows from tape? There is a method that works great in such cases. In order to get rid of the tape, you will need a double-sided dish sponge, a spatula, and soap.
We take a sponge, which needs to be soaked in water, then squeezed thoroughly so that water does not drain from it, then soap it on the hard part laundry soap. Lather the surface thoroughly, then wait a little and, carefully prying it with a spatula, remove the tape; the spatula should be sharp to make it easier to peel off. Next, the question arises of how to wash off traces of tape on plastic windows. Simply use the same hard side of the sponge, making an effort, to walk over the remaining glue, carefully wiping everything off. Then wet the washcloth in clean water and wash off any remaining glue. In order to tear off the remaining tape, you will have to try. But this way you can gradually clear the entire window. Although it should be noted that this is a very labor-intensive task.
Removing double-sided tape
And if solving the problem of how to wash tape from a plastic window sometimes does not take much time, then with double-sided tape everything is much more complicated. Since it holds stronger than ordinary stationery, so first you need to warm it up with a hairdryer or steamer, then carefully remove it from the surface. A regular soap solution can handle the remaining glue, or any detergent will do. If they cannot remove the marks, then you can try using acetone. Apply it to a cloth and wipe thoroughly, then rinse with clean water. Also, if all of the above methods do not work, then you can try to remove the tape with purified gasoline; the one designed for refilling lighters will work well. But what should not be forgotten is the need to test this or that product on the spot where the damage will not be visible.
Substances that are prohibited to use
- Powders with a coarse crystalline structure, as they can damage the material and leave scratches on it.
- Acids - using such products is very dangerous. They can ruin appearance, even later the plastic sometimes changes color from snow-white to yellow.
Therefore, when considering how to clean plastic windows from adhesive tape, it would be more advisable to abandon the above mentioned means.
More and more housewives are interested in the question: " How to remove tape marks?", since now it is used both in everyday life and in other areas of the economy. When moving, we are used to packing boxes with this particular adhesive tape; during renovations, we cover furniture with film and again seal it with tape, and what can we say about insulating windows in winter. But when The long-awaited spring is coming, we are trying to wipe off these terrible black spots on the glass, which are covered with a thick layer of dust and greasy soot.
For many people, these terrible black marks have already become a kind of “interior item”, since it is impossible to wipe them off with a washcloth and soap.
“How then to get rid of them?” you ask. In fact, dear housewives, I want to tell you that difficulties in removing sticky marks from tape arise from ignorance of some tricks. Therefore, you can consider that you have practically said goodbye to this problem. In this article, we will tell you all the secrets of removing those unfortunate sticky black marks using available means.
Scotch tape marks on plastic and glass: we remove them with improvised means
If traces of adhesive tape appear on plastic or glass in your home, there is no need to grieve, since this problem can be effectively eliminated using improvised means that every housewife has in her home.
Well, dear ladies, we suggest we begin our short excursion. The methods that we will tell you about below are great for removing traces of tape from plastic and glass.
1. Any vegetable or essential oil.
Any oil will work well for removing sticky residue, from scented essential oils to regular sunflower oil. In order to achieve maximum effect, you should:
- Apply a small amount of your chosen oil to cotton wool and thoroughly treat the contaminated area;
- leave the oil for 15 minutes so that the adhesive from the tape is thoroughly saturated with it and swells;
- when the oil breaks down the sticky residue, take a dry, clean rag and start wiping off the dirty stains;
- if after the first procedure it was not possible to completely get rid of the stains, then these manipulations can be repeated;
- At the end of the work, wipe the plastic or glass with a dry paper towel.
Another tip: be prepared for the smell of oil to “linger” in the room for a while long time, so we recommend using essential oils to remove tape. You will remove traces and enjoy pleasant citrus aromas.
2. Medical alcohol.
Alcohol will do a great job of removing tape residues and will remove the yellowish tint from the plastic. First you need to do a little testing on an inconspicuous area, since the plastic may have different composition and density, so the reaction may also be different. To remove sticky marks, you need to moisten a small piece of cloth with alcohol and gradually wipe off the contaminated areas on glass or plastic. This procedure should be carried out until the complete disappearance sticky residue.
3. Scotch.
It’s not for nothing that people say: “They knock out a wedge with a wedge!” The tape itself will cope perfectly with the problem of sticky residue on plastic or glass. Carefully place a new strip of tape over the old marks, then quickly tear it off. You may need to repeat this procedure several times, but believe me, you will be pleased with the result.
It’s best to start with this advice, but if it doesn’t help you, then move on to the method with vegetable oil and ethyl alcohol.
4. Cleaners.
Now on the shelves of hardware stores there are many products that are designed for cleaning glass. You can use a spray if the contamination is minor. If the traces of tape on the glass are very noticeable and already black, then you cannot do without special cleaning pastes that have abrasive properties.
To effectively deal with this problem, you need to:
- before starting work, be sure to wear rubber gloves, since these are chemicals that can cause an allergic reaction;
- apply a little abrasive paste to the sponge and begin to wipe off the remaining tape from the glass;
- periodically rinse the sponge to remove paste and sticky components that have already been removed;
- At the end of the work, thoroughly rinse the glass surface and wipe dry.
The use of cleaning pastes is not suitable for removing traces of tape from plastic, since abrasive particles can easily damage it and leave small scratches.
5. Stationery eraser.
You won't believe it, but a regular eraser can work a miracle and remove even the oldest tape marks! Sticky spots are removed like failed drawings in a sketchbook, and dirty marks, or rather, sticky pellets that will remain after treating the contaminated area with an eraser, can simply be wiped off with your hand.
The method of removing tape with an eraser is ideal for plastic windows, glass, furniture, and even various electronics. But if the “affected area” is large enough, be patient and strong.
6. Hairdryer
The adhesive from the tape eats into the plastic surface almost tightly. Therefore, traces of it must be removed immediately after they are discovered. Otherwise, under the influence of direct sun rays the glue from the tape and the plastic can simply become akin.
You can try using a hairdryer on the areas where there are remaining tape residues. Under the influence of hot air, the glue will soften a little, and it can be easily removed with a dry cloth or rubber spatula.
Without a hairdryer it is simply impossible to remove residues double sided tape, because it contains rubber and other foams that adhere firmly to any surface.
But it must be used very carefully, because not any plastic will withstand high temperatures and does not deform.
7. Baking soda.
Our common problem Regular baking soda can resolve this. To do this, prepare a slurry that will have the consistency of very thick sour cream. Carefully apply the resulting paste to the sponge and begin to remove traces of tape. Before using baking soda, you can slightly warm up the sticky spot with a hot blast from a hairdryer. Finally, thoroughly rinse the plastic or glass surface.
8. Nail polish remover or acetone.
Each of you probably has a similar product in your purse. Believe it or not, it does a great job of removing tape marks on glass. It is not recommended to use such a solvent on plastic, since the surface may become covered with cloudy spots.
9. A universal remedy.
Now on sale universal means“Label remover”, which is designed to get rid of traces of adhesive tape. Proceed according to the suggested instructions, and you will forever get rid of dirty traces of adhesive tape on plastic or glass.
10. Wiper.
The special glass cleaner that your husband uses in the car can also help you remove traces of tape from a plastic window:
- spray the product onto contaminated areas;
- leave for a while, periodically spraying the stains as the product will drain;
- Now wipe the glass with dry paper.
Ready! There was not a single trace left of the tape!
11. Special pencils.
It happens that there are a lot of tape marks on the refrigerator. This happens when your child immediately puts on him new stickers that he came across in yogurt or corn sticks. You have to mask such traces with magnets, and then your refrigerator turns into a “honor board” of who, where and when you vacationed.
You can apply the above methods, or you can purchase it in a store household appliances special pencils that will help remove traces of tape on the refrigerator or washing machine, and also clean them. Such products are suitable for glass, plastic, tiles and ceramics.
12. Special product for removing tape and stickers.
Have you just found traces of adhesive tape on your linoleum and nothing we have suggested has helped you? Don’t be sad, dear housewives, because this problem can be solved. Walk to the hardware store yourself or ask your husband and buy special remedy for removing Profoam 2000 stickers. It copes well with the problem of glue marks on plastic, linoleum, leatherette, and glass.
While in such stores, ask consultants about new products that you may need in your everyday life.
13. Drill.
How can you remove tape marks using a drill? Can! We will tell you about this method only when you call your husband for help.
A drill with a rubber tip acts like an eraser, only much faster. This method will quickly remove traces of tape from any paintwork or plastic coating. You should take on this work only when you are confident in your abilities, because lack of experience can easily damage the surface.
You see! Still, it is possible to get rid of dirty sticky traces of adhesive tape. It is important to understand which method can be used on a particular coating. Now you too will get rid of unsightly “interior details” on your window or refrigerator, like dirty traces of adhesive tape.
Removing sticky tape marks from furniture
For days now you have been racking your brains over how to remove sticky traces of tape on furniture without damaging it. Now stop thinking about it because we have a few for you. effective ways that will help effectively solve this problem.
|
How to remove traces of tape? |
How to use? |
|
Solvent |
From any lacquered furniture A regular solvent will help effectively get rid of traces of adhesive tape. We would like to warn you in advance that you should not overuse it, as it can leave stains and clouding on the varnish of your furniture. Be sure to check for a reaction in an inconspicuous area. Let's get started:
Make sure the room is well ventilated in advance. Since any solvent has a very pungent odor. |
|
Hairdryer + vegetable oil |
Before removing tape marks from your furniture, heat the stained area with a hairdryer. After that:
|
|
Essential oil |
Essential oil, which can be found in any pharmacy, will effectively destroy traces of glue. It contains organic acids, which are special effort will destroy the adhesive properties of the tape. It is enough to treat the sticky area with a napkin containing essential oil, then wipe with a dry cloth. |
|
Detergent + hot water |
Add to very hot water any detergent and lather well.
|
|
Acetone |
If traces of tape are present on upholstered furniture, they can be removed with acetone. It is enough to moisten a small piece of cloth with it and rub thoroughly soft upholstery. Then wash off the residue with soapy water and dry with a towel. |
And you were worried. Everything turned out to be much simpler. You can even remove tape marks from the upholstery of upholstered furniture. Nothing is impossible, believe me, dear ladies! Now you will never be scared by a new sticky spot, because from today you know all the tricks with which you can remove any traces of tape on furniture!
How to remove dirty traces of tape from clothes?
There are cases when dirty traces of tape appear on clothes, so many housewives are interested in how to remove them.
You can remove such stains using a solvent, acetone or alcohol. To do this, generously moisten a cotton pad with any of the products and place it on the stain. Leave for 15 - 20 minutes, then gently rub off the dirt.
If after the first attempt the stain does not disappear, you can repeat the procedure again. After several such manipulations it will definitely disappear. Be sure to wash your clothes after this to get rid of the unpleasant smell of the solvent.
Vegetable oil will not work for removing traces of tape from clothes. This will only worsen the situation, and in addition to the dirty stain, a greasy stain will appear.
Before you start removing stains, carefully study the labels on your clothes: maybe your favorite T-shirt should not be exposed to solvent or acetone.
If the use of the suggested remedies does not “move” the sticky stain, try disposing of it with tape. Stick the strip on the sticky spot and quickly remove it - the new tape should “take” the old residue with it.
This is where I would like to end today’s article. We hope that these recommendations will make your life much easier, and you will be able to deal with traces of adhesive tape both in the house and on clothes without much effort.
We call adhesive tape tape because it is this trademark first appeared on the markets of our country. The creators gave it the name English word Scotch is a Scotsman, which in America of the last century was synonymous with stinginess. This nickname came from users of early tape samples who complained that there was too little glue on the strip of cellophane. Now we are racking our brains about how to wash this glue from the tape, there is so much of it.
In fact, difficulties in removing tape residues arise only if you do not know some tricks. Despite the variety of types of this tape, glue is used everywhere acrylic base. It turns out that the choice of product depends on the material on which contamination was found.
How to clean tape on plastic
In our homes, plastic is used everywhere: frames, household items, furniture, children's toys and many other items. And before cleaning it from stains, you need to evaluate how good this plastic is. High quality material able to withstand more aggressive agents than cheap products. The contact time is also taken into account, since it is much more difficult to remove old tape. Some simple tools that may come in handy include:
- Vegetable oil
- White spirit or gasoline
- Ordinary eraser
- Hair dryer
Kitchen magic
Oddly enough, it is easy to remove traces of adhesive tape with any vegetable oil. It mixes with the glue, changing its properties. The oil is poured directly onto the contaminated surface or applied to a cloth and applied to the stain for several hours. The mass that has lost its stickiness is wiped off with a regular napkin, and the surface is washed with a soap solution.
Flaws. Unfortunately, this method is not applicable if it is not possible to thoroughly wash the item from oil with water.
Three, three, three and it will be... clean
A school eraser works wonders, removing traces of even the most ancient tape. Dirt is removed like pencil marks in an album, and all that remains is to brush away the specks with wet soft cloth. This method is equally suitable for electrical equipment, plastic windows, furniture or toys.
Heat until ready
Old glue eats into plastic surfaces. This is why it is important to remove masking tape or protective film as fast as possible. It is better to clean pieces of construction foam from the plastic window than to wait until, under the influence of the sun and time, the glue and the double-glazed window frame merge into a single whole. The above applies to other items as well.
If this does happen, you can try using a hair dryer. The heat will soften the adhesive mass and come into contact with other cleaning agents. The help of a hairdryer is indispensable when removing double-sided tape, since in addition to acrylic it contains rubber and various foam materials, dense pieces of which remain on everything to which they have been glued for a long time.
Flaws. A hairdryer is not always at hand, and besides, not every plastic will survive the increase in temperature without losing its decorative effect.
Furniture damaged with tape
During transportation, drawers and doors of cabinets and cabinets are secured with adhesive tape, and then they cannot decide how to wash the tape. The means used here are the same as for plastic, but there are some features of their use.