How to install a round door handle. Installing door handles on interior doors

Installation door handles doing it yourself is quite a troublesome task, especially if a person is faced with this task for the first time. In order to avoid difficulties during the installation process, it is necessary to consider the design and basics. Depending on this, the work may be performed with some differences.

Installation technology various types door handles have their differences

Handle design

Before installing a door handle, you need to understand the design features modern models this type of fittings. Of course, it is of great importance specific type system, but several general defining points can still be identified.

The design of a standard handle consists of the following parts:

• lever;
• ring;
• kernel;
• socket;
• travel limiter;
• stoppers.

You should also take into account such details as the tongue and locking mechanism, the metal cover on the box, clamping screw. The last part is used when mounting the handle on hollow interior doors. It acts as self-tapping screws, fixing the system by tightening opposite sides. You also shouldn’t miss another important piece of the design – the latch. If this type of locking system is present, an additional turning screw must be inserted.

Push-type door handle with tongue for secure door fixation

You shouldn't get down to business if you're not sure you can put everything together. correct sequence with your own hands. Otherwise you may lose important details or completely damage the product.

Types of handles

The process of installing handles on interior doors with your own hands may differ depending on the type of mechanism used. Typically, the following types of handles are installed on interior doors:

• On the socket– are easy to install with your own hands, as no drilling is required big hole, it is enough to ensure free movement of the rod. Externally it is decorated with a rosette overlay.
• Nobs- This is a rotary system that looks like a round handle with a latch or keyhole. It's pretty convenient option, especially if you install such a system on a bathroom door, but if low-quality materials are used, it quickly breaks down.
• Push– to open the door, you need to move the handle to the lower position by pressing it. This removes the halyard latch, which returns to its place immediately after releasing the handle.

Most popular types door handles

Required Tools

Before you try to install a handle on an interior door, you need to prepare your tools. You don’t necessarily need everything, especially if you purchased the simplest fittings. In order to install handles and latches on the doors with your own hands, you will need:

• drill;
• screwdriver;
• a set of drills, including a “feather” and crowns of different diameters;
• chisel;
• hammer;
• self-tapping screws;
• square;
• pencil;
• stationery knife;
• awl;
• roulette;
• conductor.

The last tool is a template for installing handles. It will facilitate the process of marking and drilling all the necessary holes.

A screwdriver will make the job of installing a door handle much easier.

Installing a handle on an interior door

Before inserting a standard door handle into an interior door, you need to make markings. To do this, use a square and a pencil. Measure the required height from the floor. Usually this value varies between 80-100 cm. If you have a prepared conductor, everything is much simpler. Just screw it to the door from the end. The holes will subsequently align with the tongue trim. So, let's look at how to insert a handle into an interior door with your own hands:

1. Drill using a drill and a hole saw through hole in the canvas.
2. Using a pin drill or a smaller hole saw, drill through the end of the door.
3. Then you need to put a tongue inside with locking system and check its operation.
4. Trace the contours of the trim and remove thin layer material so that the piece of iron is installed flush. Screw the part with self-tapping screws.
5. Insert the rod inside the already installed part. Place a handle with a ring and rosette on top. If the ring rubs against the door, you need to recess it by grinding off a small layer of coating around the hole with a chisel.
6. Screw the handle with three self-tapping screws or secure with tension pins.
7. Attach a decorative trim on top. The connection in most models is adjusted with a hex key.

In order to install the metal trim on the frame, you need to mark the position of the tongue. This is convenient to do at the stage of installing this very part into the canvas. Drill or scrape out the hole required size in the box. Then trace the iron plate, press it flush and secure it with self-tapping screws.

Lock mortise

It's one thing to install simple fittings, but how to install a handle with a lock on an interior door? To do this, it is better to remove the fabric from the hinges in order to carefully embed the lock.

An example of a high-quality embedded door handle of a simple design in a new leaf

Now let's look at how to properly install a handle with a lock on a door with your own hands:

1. Mark the position of the lock on the end of the door, outline the contours of the system.
2. Using a pen, drill several holes in the marked area, and carefully gouge out the rest with a chisel, periodically checking the passage of the lock.
3. Remove a couple of millimeters of the coating to recess the iron plate.
4. In order to insert the handle, you need to drill a hole on both sides of the blade, suitable in diameter for the free passage of the axis. To mark its position, make a mark on the lock with a pencil, set it temporarily in place and transfer the mark to the door, and then measure the required depth.
5. Secure the lock with self-tapping screws.
6. Insert the axle inside and deepen the ring.
7. Install the handle, lock it in place.

Make a recess on the frame for the pin and tongue to fit into. Press the nozzle flush and secure with self-tapping screws.

If play is formed, it is necessary to file the handle axis with a grinder. Some manufacturers put special marks on it to make this easier.

Latch Installation

Another question - how to install latches on door handles? In most cases, this is no more difficult to do than inserting the handle itself. Let's look at how to quickly install a latch handle on an interior door with your own hands:

1. Drill an additional hole in the door. It should match the position of the latch mechanism.
2. Thread the axle into the lock and install the cap on top . You need to install a plug or key lock with reverse side premises. A rotary latch is attached inside.
3. Fix the position of the parts with self-tapping screws and disguise the fastening with decorative caps, if provided for by the design.
4. An additional hole is cut on the frame for the latch tongue, if there is one. If the lock operates on the principle of fixing the halyard tongue, no additional recess is required.

As you can see, installing door interior handles doing it yourself is a troublesome task, but quite accessible even for a beginner. Please note that misalignment of parts can lead to rapid breakdown of the fittings.

Sold without accessories. You will have to purchase and install the door handle separately. The work is simple. Installation can be done independently; you only need a certain tool.

Products differ in the material of manufacture, design, and working mechanism. The fittings are selected to match the style of the room, taking into account ease of use. By type of fastening there are:

• Invoices. The fittings are simply screwed with self-tapping screws to the surface of the canvas.

• Mortise. They often come complete with a lock or latch. Installation of fittings involves cutting a groove and drilling a through hole in the body.

All mortise models are divided into two types:

• Knobs. The fittings are equipped rotating mechanism, moving the latch. Usually the handle itself is made of a spherical or disk shape.

• Push models. The mechanism operates on a similar principle, only the handle must be pressed to activate it. Fittings complete with a lock are in demand for interior and entrance doors.

Push models, in turn, are divided into two types:

• Mechanism with handle and latch assembled. Such models are inexpensive, but not durable. They quickly become loose and fail.

• The handle, latch, screw and the mechanism itself (with a tongue or magnetic) are selected separately depending on preference. Such products are of higher quality and more reliable than the first option.

Common material Metal alloys or aluminum are used for the production of fittings. Overhead models can be made of wood. For expensive paintings, handles are made of stone and glass. Most cheap option- it's plastic. Metal elements chrome plated or nickel plated.

Products vary by type of lock. The simplest locking element is a latch. The lock can be locked with a key on one or both sides. In the first version with inside The room key is replaced by a latch.

Required Tools

To install a handle on an interior door with your own hands, you will need the simplest carpentry tools:

• electric drill;
• crown attachment with a diameter of 50 mm;
• feather drill with a diameter of 20–25 mm;
• pencil;
• screwdriver;
• hammer;
• chisel.

To facilitate installation, a template for installing door handles, sold with the product, will help. If it is not in the package, you can print it from the Internet. The template is a 1:1 scale diagram of the mechanism body. It is applied to the canvas to mark the groove and hole. If you intend to install a large number of handles, a jig for drilling is cut out of wood.

How to install a door handle?

They determine the installation height of handles on interior doors according to their preference, but usually maintain a distance from the floor of 0.9–1 m. The indicator may depend on the height of the people living in the house. To maintain aesthetics, the handles of all blades are placed at the same height.

The installation of door handles on interior doors begins by applying markings, but first the canvas is lightly tapped. Density is determined by sound. Modern doors They often come empty inside. Wooden frame made only around the perimeter and jumpers installed. If the fittings fall into a void, it will be impossible to secure them.

The handle is being installed on a door that has been removed from its hinges. If the canvas cannot be painlessly dismantled, then it is wedged open. Each model has its own design features. Therefore, before inserting, it is important to read the attached instructions and take measurements. They will help you select the exact diameter of drill bits.

Latch handle installation

Installation of the latch handle on interior doors begins by selecting a solid location and applying markings. Usually the manufacturer provides a diagram. If it is absent, manual marking is done simultaneously with the insertion:

• First, a mark is placed from the edge of the canvas at a distance of 60 mm. At the end they carry out center line, mark the center for the future hole.
• To ensure that the front plate of the latch body is flush with the wood, at the end door leaf Use a chisel to select a socket 3 mm deep.
• To further install the knob handle, take an electric drill with a crown and drill a through hole in the blade. It is important to be careful to avoid damage decorative covering canvases.
• Drill from the end of the sash at the marked center feather drill hole. Its depth and diameter are equal to the size of the latch body. You cannot drill deeper, as there is a risk of damaging the panel. The latch is inserted inside and secured with two self-tapping screws.

• To install the knob, it is first disassembled. There is a technological hole on the side, inside of which there is a latch - a tongue. When you press it with a key, the handle can be easily removed.
• The next element is to remove the decorative trim. The outer half of the handle is inserted into the door hole, and the inner half is placed on the other side and both elements are tightened with bolts. Now all that remains is to put the decorative trim and the handle itself in place.

• Continuing to install a door handle with a latch involves attaching a strike plate. The flap is completely closed and they try to mark on the pan the place where the tongue will fit. locking mechanism. Using the markings, a recess is selected with a chisel, a decorative pocket is inserted, and a steel cover plate is fixed on top with self-tapping screws.

Upon completion of work, the functionality of the mechanism is checked.

Installation of handle with lock

Installing a door handle with a lock is complicated by gouging out a large groove in the end of the door for the locking mechanism housing. The work consists of the following actions:

• The lock is applied to the end surface of the canvas. Use a pencil to outline the back of the body. Using an electric drill, holes are drilled according to the markings, placing them as tightly as possible. The remaining jumpers are selected with a chisel. It is better to make a hole with a feather drill, and its diameter should be a couple of millimeters larger than the thickness of the locking mechanism body.
• A lock is inserted inside the groove. At the end of the sash, trace the outline of the front plate with a pencil, and use a chisel to select a recess for it.
• By attaching a lock to the side surface of the canvas, mark the hole for the handles. Below, mark and make a hole for the keyhole.
• The lock is installed inside the groove and secured with self-tapping screws. A metal square is inserted and decorative trims are put on. Handles are placed on the square. Each overlay is fixed to the sash with self-tapping screws or through bolts, which depends on the model.
• With the door leaf closed, the tray is marked for the striker. After cutting out the recesses with a chisel, fix the plate with self-tapping screws.

After installing the lock, check its functionality.

Installation of handles for sliding doors

To insert a handle into a sliding interior door, you only need a drill, a chisel and a screwdriver. You can simplify the task with a router. Typically, sliding door handles are oblong. They consist of a plastic liner onto which a decorative overlay is snapped.

The handle on the compartment door is installed as follows:

• The plastic liner is applied to the side surface of the sash. Trace the outline with a pencil.
• Using a drill and chisel or a router, select a groove. Its depth corresponds to the thickness of the liner. Usually 12–15 mm is sufficient.

• An insert is inserted into the groove and secured with self-tapping screws. The decorative overlay, which acts as a handle, is simply snapped on top.
• A similar action is performed on the reverse side of the canvas. If the shape of the handle is round, the recess is selected with a feather drill. The fittings may come complete with a lock. To insert it, a groove is selected at the end of the sliding door, and a counter plate is attached to the door.

Mounting a handle with a magnetic lock

To insert a handle into an interior door with a magnetic latch, perform the same steps as when inserting a conventional lock. For smooth clicking, you need to install the strike plate correctly.

At closed door on the boat they try to accurately mark the upper and lower edges of the castle. A counter strip is applied to the marking and a groove for the magnet is marked. A hole is made with a feather drill. A magnet is placed inside the groove. The counter plate is screwed on top with self-tapping screws, without deepening it flush. If the plate is recessed inside the sample, over time the weakened magnet will no longer hold the canvas.

Installation of stationary handles

There are two types of stationary handles, but all of them are easily attached to the door. Overhead models are simply fixed with self-tapping screws to the surface of the canvas. For the through option, the door is drilled. A threaded rod is inserted through the hole and the handles are screwed on both sides.

Every owner can install the fittings on the door leaf. It is important to initially correctly mark and understand the mechanism of the product.

Door knob important element any door. Together with the door, the handle bears significant loads during daily use, and also plays a role decorative element, which should be harmoniously integrated into the interior of the room.

At self-installation doors, replacing an unsuitable or broken handle home handyman you have to face the question - how to install a door handle? Good result work will help ensure strict adherence to the instructions for installing the door handle. In addition to the direct installation of fittings, it is important correct selection handles capable long time perform its functions.

Helpful information:

Types of door handles

Before buying handles for interior doors, you need to understand how they differ from each other besides the manufacturer and price. In addition, knowledge of classification door hardware will allow you to choose a handle that the best way will fulfill its purpose - to participate in opening/closing the door.

Lever handles are one of the most common options for door handles. They can be used for both entrance and interior doors. Design feature The push handle is equipped with a special tongue - a halyard flap. When you press the handle, a special mechanism pulls the damper into the door leaf and it opens. When the handle is released, the damper returns to its place, the tongue protrudes above the end of the door and prevents it from opening. To open the door, you need to press the handle again.

Lever handles are available in two versions.

First option– with separate overlay. In this option, a separate mechanism with a cylinder and a key is used to lock the door. The handle and lock are installed separately. When choosing, you should pay attention to the size of the pads. The distance between the axes of the tongue and the bolt is not significant, since the lock can be installed at a sufficient distance so that the operation of the mechanisms does not interfere with each other.

Second option– when both the latch and the lock cylinder are enclosed under one cover on the door. When selecting a lock for such a handle, you need to take into account the parameters of both the lining and the lock. In particular, it is necessary to take into account the distance between the damper axis and the bolt, the shape and size of the key slot on the escutcheon.

The easiest option for installation would be a handle, in the thickness of which the lock mechanism is located. In this case, the hole for the key is on the handle itself, and the tongue consists of two parts. When the lock is opened, the latch and bolt of the lock act as one unit. Turning the key blocks the movement of the bolt and when you press the handle, the door shutter is removed, and the door remains closed due to the bolt.

Push door handle, without locking mechanism, most often used as interior fittings.

Push-button pen

Push-button handles or ball handles are similar in their mechanism of action to push-button handles. The ball handles also hold the door due to a special pawl. But in order for the dog to hide, you need to spin the ball - hence the second name of this variety - pen - ball. Round door handles are most often used on bathroom doors. This is explained by the fact that the lock of these handles contains a key slot on one side and a special latch on the other. It turns out that you can easily block the door from inside the room. And in case of an emergency - for example, if a child is locked in a room or there is a suspicion that the locked person’s health is deteriorating - you can easily open the door from the outside using a key. However, the market does not stand still, and some modern push handles contain a similar locking mechanism.

Stationary handles

Perhaps the oldest and simplest type of interior fittings. The operating principle is push/pull. The stationary handles are fastened with tightening screws. Screws are used to attach handles to interior doors. The difference between stationary handles is only in the form:

• bracket or U-shaped (with a straight or bizarrely curved bar);
• mushroom (round, polygonal or artistic element on the leg).

To hold doors with stationary handles It is better to use a roller mechanism. When free, the roller protrudes above the surface of the door leaf and does not allow the door to move. However, if you apply a certain force, the roller is recessed into a special groove and the door opens.

Handles for sliding doors

These handles have a special design. This is due to the handle being recessed into the door leaf during installation. Such a handle practically does not protrude above the surface of the door leaf and does not interfere with opening.

Handles for sliding doors differ in thickness. The thickness of the handle for sliding doors should correspond to the door leaf. A handle that is too thin will be difficult to install correctly. A handle that is too thick will stick out and prevent the door from opening. .

What are door handles made of?

The purpose of the fittings determines the material from which it is made.

For example, the handle for the front door should be more durable, since the weight of the front door is significantly greater, which means the load on the handle is higher. Thus, high-quality steel is often used to make handles for front doors. The door handle for the front door must withstand the main mechanical methods opening - breaking out and drilling.

It is imperative to take into account the operating conditions. So wooden handles afraid high humidity, which means it is not advisable to use them on doors to the bathroom and kitchen.

The most commonly used door handle materials are:

• tree. Very beautiful material, but is capricious with regard to room humidity and is not very resistant to active use.
• plastic. Most cheap material, but at the same time the most unreliable.
• Brass is the most common metal used to make door handles. The main advantages of the material are strength and wear resistance. In addition, it creates a feeling of warmth when touched.
• various grades of steel, including stainless steel. The main advantages are strength and durability.

In addition to the main material, finishing elements made of glass or natural stone can be used.

How to properly attach a handle to a door?

No matter how complex the mechanism or decor of the door handle is, its installation can be done in a few standard steps.

Step 1. Selecting accessories

As already mentioned, the handle should match the design of the door itself and the interior of the room as a whole. So modern style The high-tech look is best met by laconic chrome-plated handles. For a room in the Rococo or Baroque style, luxurious ornately shaped handles with gilding are suitable.

In addition to the handle, the visible door fittings are the hinges, which means the hinges and handles must be made in the same color. Find out more in our material about.

It is also necessary to take into account the purpose of the door and the characteristics of the room where the door is located.

It is imperative to clarify the method of placing the lock. Namely, the method of its attachment in relation to the handle - separate installation is required locking mechanism or it is built into the handle. Preliminary measurement of the thickness of the door leaf is important not only for sliding doors. It will be difficult to install a lock and handle designed for a massive entrance door into a thin interior door. If the lock cylinder and handle are located under one escutcheon, it is necessary to take into account the size of the internal elements of both mechanisms so that they do not interfere with each other’s operation.

When purchasing, it is advisable to hold the handle and squeeze it in your palm. Protruding elements should not leave a clear imprint on the skin. Otherwise, using the pen will be unpleasant. In addition, there should be no burr on the handle.

Step 2: Locate the Handle

Before you start marking and drilling, you need to decide on the location of the handle.

The distance between the handle and the edge of the door leaf is regulated by the size of the mechanism and the length of the tongue, if any. If the handle is stationary, it should also not be placed too far from the edge. This arrangement will make it difficult to open/close the door.

For ease of use, the installation height of the door handle is also important. This parameter is easy to calculate when approaching the door - the installation height of the door handle is determined by the level of the belt. The height of the handle directly depends on the height of the regular user, which means that the level of the handle in the living room and children's room will be different. Door handle height common use, such as the kitchen and bathroom, should be at an average level, usually 80 - 120 cm from the floor.

Step 3. Marking the location of the handle and its fastening on the door leaf

Having determined the location of the handle, it is necessary to prepare the canvas for making holes for installation. Standard length the tongue in the lock is about 60 mm. This is exactly how much needs to be set aside from the edge of the door. A straight line is drawn through the resulting point parallel to the end edge of the door leaf. Next, using a square at the required height, draw a perpendicular line to the end of the leaf, along the end of the door and again along the other side of the leaf at a distance of 60 mm.

To clarify the dimensions of the hole for the mechanism, it must be freed from the lining, attached to the door and the boundaries of the groove are drawn. If the door is equipped with a separate locking mechanism, it is necessary to make markings for it as well. Marking the door for a lock is carried out in a similar way.

Don't forget to mark the place for the tongue exit on the end of the door. This place should be exactly in the middle of the thickness of the canvas.

All marks must be made carefully and accurately. Reducing the dimensions may lead to difficulties in installation or may interfere with the free movement of mechanism parts. A hole that is too large will be noticeable under the trim and ruin the entire appearance.

Step 4. Making holes for the handle and lock elements

For drilling holes large diameter There is a special drill - with a crown. To avoid damaging the opposite side of the canvas, you should not try to immediately drill a hole through the entire thickness of the canvas. It is optimal to drill to about half the required depth. Next, it is better to continue drilling from the opposite side until the channels are connected. This trick will not only protect the appearance, but will also ensure the correct movement of the channel under the mechanism - strictly perpendicular to the surface of the canvas.

When drilling, you need to hold the drill strictly perpendicular to the blade. Deviations are unacceptable; this will lead to distortion of the mechanism and incorrect or short-lived operation of the handle and lock.

After preparing the groove for the mechanism, you can begin to create a hole for the tongue and bolt of the lock. This must be done very carefully and carefully. An excessively wide passage can damage the door leaf during operation and create a noise effect. It is better to cut the hole using a chisel.

Step 5. Directly installing the handle

After making the necessary holes, you can begin attaching the handle. Before screwing, it is worth marking and using a thin drill to mark the places for screwing in the bolts directly holding the handle in the door. Pre-drilling is designed to ensure neat attachment of the handle and normal work latches. If the bolts for connecting the halves are hidden by a cover plate, it must be removed before installation using a special key. The key must be included with the handle.

Step 6. Making a slot in the door frame

After attaching the door handle and installing the lock mechanism, you need to mark and cut a groove in door frame, where the tongue and bolt of the locking mechanism will be hidden. There are two marking methods.

First option. Apply to the installed pawl coloring matter: ink, paint, chalk, toothpaste And so on. Then, with the door closed, pressing or rotating the handle makes a mark on the door frame. This option is convenient if there is a very small gap between the door and the frame or it is covered with a decorative overlay on the door leaf

Second option. With the door closed, the level of the tongue is marked using a ruler inserted between the door and the frame.

After graduation installation work You must ensure that the handle is attached correctly. If the lock works without difficulty, the bolt is easily controlled by the key and securely fixes the door, opening/closing the door does not cause difficulties, the handle is installed correctly.

The door handle installation instructions provided are suitable for most interior door handles. Installation of the handle for the front door in most cases is carried out by the manufacturer. This situation is explained by the complex structure of the lock and the need for special precision during installation. Besides entrance doors are made of especially durable metal, which is difficult to drill with home tools.

We recommend watching a video about installing an interior door handle

Replacing a door handle

Sometimes it is necessary to replace the old handle with an already installed door. The process of replacing a door handle is slightly different from installing a new one. First of all, it is necessary to take into account that the doors already exist various holes, the size of which needs to be measured and when choosing a new handle, focus on them.

So the size of the mechanism and decorative overlay should not be less than that of the old pen. Otherwise, the edges of the old hole will be visible and ruin the appearance. If the hole is still large, it must be filled with putty and, after hardening, thoroughly cleaned.

If the size of the new lock is larger, you need to expand the grooves for it using a chisel or drill.

If the old tongue still works, you should leave it old mechanism, this will help avoid difficulties during dismantling and reduce the likelihood of damage to the door leaf.

To clean the painted lock plate, it should be dismantled and returned to its place after cleaning.

When painting doors, it is better to remove the door handle. This way there is no need to cover the handle and the cover with newspaper or masking tape, since there is no danger of getting them dirty.

Now you have all the information you need to quality installation or replacing a door handle. If you correctly mark the door leaf and carefully drill all the holes and grooves, installing the handle will only take a few minutes.

When replacing a broken handle, you must perform a similar sequence of operations, paying attention Special attention choosing a new pen.

Tweet

Stammer

Like

After the door has been installed, you need to install the door handle. Despite the simplicity of the product, it is not so easy to install. In order not to damage the product and the door, it is necessary to follow the rules and sequence of assembly, because each type is assembled and installed in its own way.

Types of handles

Handles can be divided into 2 types:

• stationary;
• working together with a lock or latch.

Stationary ones are the simplest. They are missing complex mechanisms, the handle is stationary and moves or scrolls only when the threads become loose or something breaks. Installing such a handle on an interior door with your own hands is quite simple. Most of them are attached with self-tapping screws. For a more aesthetic appearance, make a hidden hole for the screw caps and insert decorative buttons to hide the heads. The end-to-end connection type provides for the presence threaded rod. You just need to drill a through hole at a height of 80-90 cm, screw a pin into one handle, insert it into the hole and screw on the other half of the handle.

Installing a latch handle on interior doors is more difficult the more more complex design locking mechanism. They can be divided into 2 types:

• rotary;
• push.

The first type includes ball-shaped handles with the simplest latch. They are also called knobs.

The material and coating of the handles can be any: plastic, metal, wood, glass. The most common are metal ones with sputtering, chrome plating, nickel plating, etc. Strength and durability will depend on the material. Everyone can choose fittings that suit their needs and desires.

In order to understand how to install a door handle, there is no need to go into detail - just consider the installation process.

Installation procedure

The example used is the installation of door handles with a latch. Round and oblong ones are installed the same way.

For installation we will need:

• hand drill or screwdriver;
• wood crown with a diameter of 50 mm;
• wood drill with a diameter of 22-25 mm;
• chisel;
• hammer;
• pencil.

The standard height for the handle is 80-90 cm from the floor. It is usually installed at waist level. It is necessary to take into account that for all doors you need to choose the same height, otherwise it will look ugly.

The height must be marked on the door leaf at the end and side. Mark the center at the end so that you can later drill a hole for the halyard latch. To correctly mark the drill location on the side of the door, measure the distance from the edge of the latch to the middle of the hole into which the square is inserted. Transfer this length to the side of the door.

After marking the centers, we proceed to drilling the holes. To do this you will need a drill, a thin drill (2-4 mm) and feather drills (22 and 25 mm). We need a thin drill to set the guide. When drilling through the exit side with a feather drill, chips are formed. To avoid this, just make a hole with a feather half the thickness of the door, and then start drilling from the back side. To do this, we need to make a guide with a thin drill. Drilled first side hole with a diameter of 25 mm, the second is made on the side with a diameter of 22 mm.

For those models that come with 3 additional screws for attaching the base to the door leaf, you do not need to drill a large hole with a crown. It is enough to make a hole for a “square” with a pen drill with a diameter of approximately 12 mm and holes for the tightening bolts. This design will last longer.

Now mark and make a recess for the latch. To do this, insert the latch into the end and trace the outline of the bar. Then you need to select a groove for the strip. It is better to do this with a milling machine. If you don’t have one, you can get by with a chisel. It is enough to go deeper into the thickness of the plank.

Now installing a handle on an interior door will not be very difficult. All that remains is to assemble the door handle inside the door leaf. To do this, clean the hole from dust and wood chips, insert the latch and secure it with self-tapping screws. However, you should not be zealous and clamp it too tightly, otherwise it may jam.

Now insert the square into the latch hole. Then put on the handle. The kit comes with left and right handles, so make sure you insert them correctly before screwing them on. After installing the handle with the lock, screw the handle with three self-tapping screws to the door leaf.

Mount the second handle in the same way. After assembly, check whether everything works correctly, whether the latch moves, whether it slides in all the way and whether it is jammed. When finished, decorative caps are screwed on to hide the fasteners. On the bottom of the handle, as a rule, there is a hidden screw for a hex key to secure the caps.

If you have a round handle, insert a rod into the hole. It has grooves on both sides. There are also grooves on the handle that must coincide with each other. Put it on and press until it clicks.

Foley handles can be mounted on both left and right doors. To change you need to take it out cylinder mechanism and the fixing mechanism from the handle body and swap them in accordance with the side of the door opening.

Strike plate and lock recess

The installation of the door handle on the interior door is complete. All that's left to do is finishing touch, namely, embed the mating part of the latch into the hole. The first step is to mark the center of the latch. To do this, close the doors not too tightly and draw a pencil at the required level. You can also close the door tightly and open and close the latch several times to leave marks. Now select a groove in the middle of the loot. There is no need to make it deep. Measure the length of the latch at the very big place and choose 1-2 mm less.

The groove under the lock is selected deeper and larger. Everything depends directly on the castle itself. Sometimes the kit may include a plastic pad in the groove - it needs to be inserted before the strip is secured.

A decorative strip is attached over the groove. There is no need to cut it flush. It is enough to screw it with self-tapping screws or nail it with nails. All that remains is to check if everything is working correctly. At this point, the installation of handles on interior doors is completely completed.

Handles with a lock are installed according to the same principle. The difference will only be in the diameter of the end hole.

Installation on sliding doors

When installing handles for sliding doors, you need to have a drill, feather drills, simple drills and a milling machine with a cylinder cutter. The handle is an oblong tab that goes deep into the door. As in the previous case, you need to decide on the height of the location. Then trace the plastic liner onto the door leaf with a pencil.

Using a drill with a 25mm spade bit, drill holes 13mm deep very close to each other inside the outline. Then select everything with a chisel or chisel. In the presence of milling machine do it with a cutter. This will make the hole neater. Now insert the plastic liner into the hole and secure it with self-tapping screws. Place the pad on it and press until it clicks.

If you have a round handle for sliding doors, then your task becomes much easier. You just need to make a hole using a drill of the required diameter. Then everything is the same as with the oblong handle. On sliding doors a lock or end grip can also be installed.

Despite its apparent simplicity, installing a handle on an interior door can be difficult. And if you are not sure about anything, it is better to contact specialists or someone who has experience in such matters. After all, a mistake can ruin your door or handle.

Installing a door handle on an interior door is done with your own hands, since door blocks are not supplied with fittings. To do this, you need to select a tool to perform the required work. Each fitting comes with instructions for use. A convenient installation height for a person from the floor covering and a design diagram are indicated. If there are no instructions on installation height, one condition is necessary for door handles. A person should not open the door in a bent position (about 1 m from the floor).

Drawing with dimensions for installing door handles

Depending on the wishes of the person, only the installation of the handle of the door opening mechanism or door handles with mechanical or electromechanical lock. Industry produces various systems locking a home or room. The peculiarity of locks is that millions of structures must be opened with different keys.

Installation work must be performed in a certain sequence:

Step-by-step instructions for installing a door handle

Tools for work:

• screwdriver (drill);
• carpenter's meter, marking pencil;
• set of wood drills, bit for drilling large diameters.

All door handles can be divided into overhead and mortise. Mortise handles can be divided into rotary structures and rotary ones with a lock. To protect the lock from unauthorized opening, it is necessary to create production facilities for the production of locks and keys of various modifications and sizes.

Scheme for mounting a door handle

They must be protected from water, frost and from opening with a master key. Many designs require certain professional skills from the master. It is impossible to install a door handle without special skills and tools. If it is a support one, then it is not connected to the opening mechanisms.
When marking, it is necessary to determine a place that will not interfere with the rotation of the key and will be at the level of the person’s hand.

Mechanism installation process door lock with a handle

Typically they are decorative decoration doors. Rotary knobs made by German manufacturers are especially different. The next most difficult installation is considered to be the design of a rotary handle with a lock without a key for locking the doors. Using a simple pencil and tape measure, you need to mark the location of the hole for the handle and lock.

The process of marking a door for installing a handle

Select a metal drill according to the diameter of the rotary rod for metal doors and a wood drill for wooden ones. Using a drill and pen drills, drill a hole for the latch to the depth required for the latch bar to fully fit.

The next task is to accurately drill the hole for the handle. Having removed the latch, drill a signal hole with a small drill. Insert the latch and visually determine the accuracy of the hole in the door leaf and the hole in the latch.

The process of drilling holes for door handles

Once you are sure of the accuracy, make a hole to the required size. Having assembled and secured the handle in the door leaf, we make markings for the hole with a recess. Using the selection method, pre-assembling and disassembling, we bring the size of the loot to the required size. This handle should be the same size as the thickness of the door leaf.

Marking the door for the groove

When marking the installation location of the tongue, use a chisel to hollow out a groove for the strip with screws for fastening and for the latching strip in the door frame. The rotary handle is secured with screws on both sides and is secured with a cotter pin to prevent it from being pulled out.

Installation of mortise locks with handles

Mortise locks with a rotary handle and a lock at the end of the door leaf, a special design of the lock cylinder, are produced by manufacturers of more than a million variants of locks. The number of such models available is sufficient for metal and wooden doors. Do-it-yourself installation of mortise mechanisms begins with careful marking of the mounting mechanisms on one side of the door.

Door marking diagram for installing a door lock

Using a chisel, cut out a groove in the body of the door leaf according to the dimensions of the locking system mechanism. The mechanism is installed at the level of the end of the canvas and is closed with an overlay strip.

When working you have to use chisels different sizes, periodically sharpening on sharpening machine or a block at a certain angle.

After making sure that the lock structure is completely recessed into the door leaf, we make a signal hole using a drill with a thin drill for a rotary handle, having previously removed the lock from the door.


We check the accuracy of the hole and drill the door using a crown of the required size from both sides of the door to the middle of the leaf for the handle. Once the lock and handle are installed, all screws must be tightened. After checking the functionality of the lock without closing the door, you can begin marking the groove for the loot.
In the door frame opposite the lock, make a mark on the frame for the latch. Having opened the door leaf, mark, arrange and secure the door with the groove.




If the groove is marked incorrectly and the lock tongue does not fit or there is a large gap, it is necessary to dismantle the groove and move the groove using a chisel. The chute pad and the lock bar should fit snugly, but without friction.

Reinstalling the handle

If necessary, unscrew the mounting screws and use a chisel to deepen seat. Or make a cardboard lining according to size and thickness.
Watch the video to see the process of installing a lock on an interior door.