Adapter between tiles and laminate. Threshold between tiles and laminate - how to combine incompatible materials? Decorating the floor in the hallway with laminate and tiles: photos of successful combinations

Combination various types Floor coverings should be planned at the design stage, pouring the floor. Laminate and floor tiles may differ in thickness and requirements for the substrate. In order for the floor covering to look aesthetically pleasing and comfortable, it is necessary to properly prepare the base, lay the covering so that it is of the same level and does not have a threshold at the junction different types materials.

The junction of the laminate with the tile floor looks unsightly, it is difficult to join them perfectly; an unaesthetic gap always forms at the junction, into which debris and moisture fall. To prevent this from happening, a special threshold is used to join the tiled and laminated floors; it can be flexible or hard, and is made from different materials. How to choose the right threshold between tiles and laminate, what to look for when choosing and installing?

Combining floor coverings

Not only the threshold between rooms becomes a place for combining different types of floors. Sometimes a large open space is finished in multiple materials. In this way, interior zones with different functions that require more frequent cleaning are identified, flooring because of special conditions operation:

• kitchen in the dining room,
• hallway in the living room.

How to combine coatings, select design, color?

• To harmoniously connect two zones, it is better to compare floors of the same color and tone.
• Laminate looks impressive next to tiles that imitate the same type of wood as laminate.
• Floor tiles in earth tones are combined with laminate flooring in natural colors.
• Contrasting flooring, such as patterned marble tiles, can be used to create a dramatic separation.

It is important that both floor coverings match the design and do not create the impression of cacophony. In such situations, you have to deal with combining floors of different heights. The joint may not match, but must be securely fastened.

How to join tiles and laminate?

The gaps at the junction of different types of floors are filled in different ways.

Often people want to perfectly match the laminate floor with the tiles. Unfortunately, this decision is not allowed due to the recommendations of laminate manufacturers. Thermal expansion of laminated floor panels (under the influence of heating, sun rays) in the absence of seams or indentations of the edge of the laminated floor from walls or other fixed elements will sooner or later lead to the appearance of unaesthetic bulging.

It is simply necessary to leave technological margins. Laminate flooring installation instructions include guidelines for exactly how much setback should be maintained. The distance to the wall can be easily masked with a plinth.

But what to do with the gap between the laminate and the floor tiles? As a rule, the edge of a cut laminated panel does not look aesthetically pleasing. There are often differences in height between the floating floor layer (film + screed + laminate) and the ceramic floor layer (tile adhesive + tiles).

Quite often, the joint is formed using a special threshold that makes appearance the floor is aesthetically pleasing while performing a practical function. This great option especially for materials with uneven cuts, such as tiles. The threshold is considered the ideal solution for hiding cracks.

Today you can find thresholds made of various materials:

• aluminum is the most popular option,
• of stainless steel,
• brass,
• plastic.

If the edges of the floor coverings are uneven

If the edges of the materials being joined are poorly processed, have chips, or a wide gap, it is better to cover the joint:

Please note that these elements are visible. Therefore, when choosing a metal (aluminum, stainless steel, brass) should be guided primarily by their aesthetic properties:

• brass is ideal for traditional interiors;
• Stainless steel, aluminum are neutral materials, popular in modern interiors.

Aluminum sill

Differences in floor height depend on:

• thickness of finishing materials,
• the specific nature of the glue, cement mortar used for laying tiles,
• thickness of the substrate under the laminate,
• fill used under heated floors.

The gap, the difference in heights, can be quite successfully masked by a multi-level threshold. Some thresholds are screwed to the substrate if necessary.

Flexible thresholds if tiles and laminate have different heights

If the joint of the floor coverings is not straight, it is advisable to use a flexible threshold that perfectly adapts to curved lines.

A flexible threshold is great for hiding gaps between floor coverings of different heights. The mounting rail is available in different options(see picture below) for connecting floors of different heights, the height variation is shown as an example in the picture.

There are different colors of decorative thresholds - from matte silver, brass, to all shades and textures characteristic of different types of laminate.

Stages of installation of a flexible threshold

The separation of individual zones organizes the interior and sets a clear boundary between spaces that perform different functions. Laminate gives the interior a warm, pleasant, elegant character. Ceramic tiles are practical: durable, resistant to scratches, moisture, and easy to keep clean.

The effect of combining tiles with laminated panels can be spoiled by an incompetent choice of different materials or poor installation. Visual impression is important, as is technical aspects. The main principle is moderation. One material may look rich, the other quite smooth, forming a background. It is necessary to choose the color carefully; the principle of selecting a similar color does not necessarily have to be applied.

Often people who are in the process of finishing an apartment or have simply started a renovation, wanting to update the interior of a house or apartment, are interested in how to combine laminate and tiled flooring. floor tiles, which connecting element to use in different cases– if the gap is large, the edges are uneven, the joint is curved, or there is a height difference between the materials. This dilemma occurs in the kitchen, hallway, bathroom, living room. The problem is easily solved with the help of a special threshold, selected depending on the type and condition of the floor.

A threshold between laminate and tiles is made when two different materials are used to finish the floor. The joints of the coatings must be properly designed - this will ensure maximum aesthetics and durability. Most often, tiles and laminate are used together. Thresholds are made from different materials, the most popular options being metal or flexible. Probable profile shapes are T, G and N. There are hidden and open options fastenings, each solves certain problems.

Features of the threshold between laminate and tiles

Depending on the design intent, the areas where floor coverings meet may have various shapes, be in certain parts of the room. For aesthetic reasons, they are often hidden under interior doors in the areas where two rooms meet. This option is the easiest to implement; it is designed as a threshold.

There is a scheme in accordance with which the joint lines are given a complex shape or significant length, which is then used for zoning. It is advisable to use a joint without a threshold.

Important! The threshold for the junction of tiles and laminate smoothes out differences, since the materials have different thickness and certain installation features.

An important feature that needs to be taken into account when arranging the threshold is the different mechanical and physical properties materials. Laminate can increase in volume in case of fluctuations in humidity and temperature; such changes are not typical for tiles. To avoid deformation and other problems, a small gap is left between the materials when laying.

Laminate is hygroscopic, so its joint with tiles must be treated with a special compound - sealant. For the same reason they do ceramic cladding. To ensure that the rubber threshold between the tiles and the laminate lasts a long time and does not deform, the materials are trimmed before its installation. When the joint line is straight, there are no problems; no adjustments are made. If the joints have bends, adjustment is required. All necessary cuts are made for it, the tool is either manual or electric jigsaw.

When decorating interiors, joints between different flooring materials must be properly sealed.

Types of thresholds for laminate and tiles

Various inserts between tiles and laminate are available for sale. Each species has its own characteristics and physical characteristics.

Aesthetics and functionality are what ensure the right junction

Flexible threshold for laminate and tiles

A soft threshold for the transition of laminate to tile comes with glue with reverse side. It is easy to install, but not the most durable. Procedure:

1. Unpack the product, measure a fragment of a given length, cut it off.
2. Mark the area where the threshold will be placed, draw a contour - this will allow you to fix it exactly in the central part of the joint.
3. Cut a strip of paper down the center.
4. Carefully remove the protection and re-glue the threshold to the base.

You need to remove the paper before gluing the threshold.

Flexible solutions provide some scope for action

Multi-level threshold between tiles and laminate

This profile for joining tiles and laminate is used when creating curved joints. Each individual part has a protection in the form of a bar, a base. The permissible difference in height is within 0.9 mm.

Installation procedure:

1. A joining seam is marked on the base.
2. Create a seam and attach the tile to accurately follow the contour of the first line.
3. The base of the flexible finished profile is laid along the outer parts of the tiles and secured with self-tapping screws. If there is a need to use dowels, the work will become more complicated. In this case, holes are first made, plastic parts are then inserted into them, and the base is secured.

The laminate must be laid, precisely following the course of the joining lines. The outer parts of the coatings are treated with a pre-prepared sealant - this mandatory requirement. Upon completion of the work, the cover (or cover) is returned to its place. You will have to apply a certain amount of force, tapping the joint with a mallet or pressing the structure with your palm.

Differences between materials are acceptable, but they should not be more than a centimeter

Hidden threshold between tiles and laminate

The hidden connecting threshold for laminate and tiles in the form of the letter H is arranged according to the following scheme:

1. The plank is carefully turned on its side, then inserted under the nearest crusts so that the laminate goes into one groove of the threshold and the tiles into the other. This way the transition will be neat and functional.
2. The seam in the tile area is sealed with grout, and a sealant is used under the laminate.

As a result, one side of the letter “H” is held by a hook from below the covering, the upper part is laid on top of the flooring like a metal threshold of a simple design.

Installing the thresholds is simple; you can do the task yourself

T-shaped threshold between tiles and laminate

A profile for connecting tiles and laminate in the shape of the letter T is the best option for arranging a straight or curved joint. The plasticity of the metal and the special shape of the edge allow the product to be bent exactly as needed.

Important! Another popular type of threshold is in the form of the letter G. The differences from the T-shaped one are minor.

Work order:

1. Calculate the installation height of flooring materials (both). It is necessary that it matches, otherwise the decorative layer will come out sloppy.
2. Mark the seam area in the base area, measure, then cut the profile, bend it, if necessary, compare the results with the joint.
3. Lay the tiles and lay a threshold in the joint area. The fastening plates must be under the cladding.
4. Start laying the laminate, pushing it to the side of the threshold.

Be sure to plan the gap. It will be easiest to attach to the edges of the laminate masking tape, then assemble a common threshold, hide it under the threshold, taking into account the markings.

Normally, if the work is carried out carefully, the joint is virtually invisible

Metal threshold between tiles and laminate

Transitional thresholds between laminate and metal tiles are suitable only for direct joints; there are no restrictions in terms of the levels of coatings. Suitable for decorating materials in the area under the door. Colors, textures, height, width of elements may vary.

Method of work:

1. Calculate the length of the threshold, trim the part.
2. Mark points at the joints where holes for fasteners will then be made.
3. Drill holes and install liners in them.
4. Attach the threshold to the screws, act carefully so as not to bend the parts.
5. For a screwdriver, the torsion should be small.

In order to prevent dust and debris from getting under the thresholds, the edges of the latter are treated with sealants before installation.

Proper execution of work is the key to the durability of the finished coating.

Which threshold is better between tiles and laminate?

There are different types of joining thresholds for tiles and laminate flooring; to choose the best option, you need to decide why exactly it is needed. The main options are camouflage at different levels, zoning, protection from damage, and so on.

Important! Thresholds emphasize or hide the joints between different materials - depending on the design idea.

The following parameters are also taken into account when choosing:

1. Seam configurations - any thresholds are suitable for straight joints; for curved joints only flexible plastic or metal ones are suitable. The depth of the joint also plays an important role - for small parts, they take parts with internal flat parts and attach them directly to the seam. In this case, the optimal solution would be a self-adhesive threshold for laminate and tiles.
2. Manufacturing materials, they can be different, most often they use plastic and metal, less often wood.
3. Fixation methods - open or closed. For open ones, take self-tapping screws, the heads of which will be visible. For hidden ones, decorative overlays should be used.

Be sure to consider the dimensions of the products.

Thresholds can hide differences or emphasize joints

How to install a threshold between tiles and laminate

The plinth between the laminate and the tiles is installed according to the instructions:

1. The type of joining materials should be determined before laying the screed, so that in the future the levels will be the same.
2. For laying on ready-made screed height differences are removed using adhesive for installing tiles.
3. To disguise a joint with a significant difference, multi-level profiles are used.
4. If materials are laid in a floating manner, take iron thresholds in the shape of the letter T. When the area is small, both coatings are rigidly fixed in the joint area. Compensation gaps are allowed strictly under baseboards.
5. Thresholds can optionally be matched to the shade of the floor covering.
6. For pruning, you should use high-quality, high-precision equipment; if necessary, you should turn to professionals for help.

The configuration of the site is not important. The accuracy of the connection depends on the technology of the work, and not the type of substrate.

Important! Joints of complex configurations are difficult to make; professional help is needed.

This is what an unformed joint looks like

Joining tiles and laminate without threshold

The joints are also designed without thresholds. The main ways to do this are:

1. Inter-joint grout. The option is affordable and easy to implement. It is used during installation, as it is completed. The gap between the materials is filled with a special grout of tile joints; the height differences between the coatings should be insignificant (or better yet, absent altogether). Then the joint line is marked on the base and the tiles are laid taking it into account. The laminate is trimmed and silicone is applied along the edges. The joint is filled with the prepared compound, wait for the sealant to dry, put grout on top and level it.
2. Cork compensator. A precise strip of cork (compensator) is placed between the materials inside the gap. The method is suitable for straight or bent joints. It is desirable that the coatings have equal height, otherwise the joint will be unaesthetic. For work, use a compensator, the top of which is finished with a protective varnish composition. Standard length expansion joints are only suitable for processing straight joints in the door area. In other situations, their length is short, which necessitates the need to splice parts and order large elements. When carrying out work according to the scheme, first one type of coating is made, usually tiles, the edges are sanded, unevenness, dirt, dust are eliminated, a compensator is put on if the coatings and parts are of different heights, the cork is trimmed. The compensator is glued, pressed tightly to the edges, then bent a little, sealant is applied, and pressed back.
3. Cork sealant. The work on creating a joint is similar to grouting; the seams are filled with a sealed cork compound with crumbs. After complete hardening it will be elastic good joint. The advantage of this method is that there is no need to apply sealant separately along the edges; the cork already has required properties. There is only one drawback - the seam dries out and turns brown. Cork sealant is sold in tubes. It is inserted into the gun and then spread over the surface. If this approach is inconvenient for some reason, the sealant is placed in a container with a spatula. Over time, the composition deteriorates and will need to be renewed.

If you do the work according to the scheme, the joints will be no less reliable than the threshold ones. When choosing the optimal option, you should take into account the features of materials, design, and other parameters of a particular object.

How to make a threshold between tiles and laminate - choosing the best method

Today, combining two floor coverings in one room at once is not difficult. The article will discuss how to choose and install the threshold between tiles and laminate with your own hands, thereby obtaining an original floor finish.

Closing the seam between tiles and laminate

Modern fashion trends have to finish the floors with the division of the room into functional areas. This is accomplished through the use of several facing materials. The most interesting is the combination of ceramic tiles and laminate.

To harmoniously combine these two coatings, you will need to use a threshold for laminate and tiles so that the joint between the two zones does not stand out. In the photo and upon inspection, this cladding element will not stand out, but rather will complement the originality of the coating.

The joint between two materials is a line and not always perfectly straight. If you do not close it, it will be quite difficult to make the seam invisible. A special decorative threshold will allow you to hide it, as well as compensate for possible height differences between adjacent sections of floor coverings.

Materials for making thresholds

Today, three main types of thresholds are known, depending on the materials used in their manufacture:

• aluminum– high strength characteristics and wear resistance, low degree of abrasion during operation and good resistance to mechanical loads;
• plastic– mounted together with a rubber backing, which ensures the tightest possible fit of the threshold to the mating surfaces;
• wooden- have less flexibility and are prone to drying out, therefore they are less popular, but sometimes their design is ideal for combined coatings.

Classification by threshold configuration

As for the parameters, the threshold between tiles and laminate can be of two types: flexible or straight. If the first is the simplest plate for eliminating the visible straight gap between two floorings, then the curved one is a real accessory for people with design talent, which helps bring the most non-standard ideas to life.

Existing flexible thresholds for laminate and tiles can change their laying trajectory along a small radius.

Today, thresholds are supplied for sale in disassembled form. If earlier it was possible to purchase a threshold and first cut it and insert it into the gap, now you will need to first use a backing, and then attach the decorative strip itself to it.

It is worth remembering the low elasticity of wooden thresholds, so it is worth understanding that a flexible threshold for laminate and tiles can only be made of plastic or aluminum.

Types of connection types

There are several basic modifications that thresholds for laminate and tiles can take, depending on how the plank is connected to the coating. Read also: “How to make a threshold between laminate and laminate - methods.”

It is worth highlighting the following options:

The H-shaped threshold for the joint between laminate and tiles is laid in the following sequence:

• The plank is turned on its side and inserted under adjacent floorings so that laminate is inserted into one groove of the threshold and ceramic tiles into the other.
• The seam formed on the side of the tile is sealed with grout, and a sealant is used under the laminate. Thus, it turns out that one side of the letter “H” is held by a hook from the bottom of the covering, and the top is laid on top of the flooring like a simple metal threshold.

There is also a type of separate H-shaped threshold, which was created to facilitate the installation process. The separation occurs at the jumper level. The lower part is laid under adjacent decking similarly to the method described above for a solid element, and the upper part is simply inserted into it.

The process of laying a threshold between tiles and laminate

As for laying the simplest metal threshold, the owner can do the work himself.

To do this, he will have to do the following:

• measure the thickness of the seam at the junction of tiles and laminate;
• mark the plank to be laid taking into account the previously obtained dimensions;
• attach the threshold and mark the proposed fastening points with self-tapping screws;
• drill holes for fasteners, taking into account the sealant, which must first be driven into them;
• screw the screws through the strip into the seals.

If it is not possible to use a hammer drill with a drill and a thickening to take into account the dimensions of the seal, then you can process the joining threshold for laminate and tiles using a larger drill.

As for screwed-in screws, it is necessary to recess them below the surface of the strip so that they do not cause discomfort during operation. Errors made during installation can lead to injury if residents start bumping into protruding fastener or an insecurely secured threshold.

It would be more aesthetically pleasing to use hidden fasteners to secure the plank. You can use liquid nails for this. This adhesive composition is applied under the threshold for laminate and tiles; a multi-level installation method will not be a problem. In the photo and with visual inspection such fastening will not be noticeable, which makes the decorative element more original.

It is possible to do without thresholds to combine different floor coverings, given that the price of such decorative strips is high, but it is not recommended, since without them the work of laying the flooring itself becomes much more complicated (read: “How to make a joint between tiles and laminate without a threshold - options “ ). A correctly selected threshold will fit perfectly into the interior of the room and will complete the idea that the designer had in mind.

Naturally, when working with construction companies The owner can also order the service of laying the threshold in combination with the installation of floors in the room. Specialists will take responsibility for selecting planks, installing them, and will even provide a guarantee for all services provided.

Thresholds for the joint between tiles and laminate

Zoning the space of premises is often carried out by installing floor coverings with dissimilar materials. The surface of the kitchen area is covered with ceramic tiles, the floor in the dining room or living room adjacent to the kitchen is finished with laminate. The materials belong entirely to different groups facing products, but fit perfectly next to each other. To design the connecting lines between them, thresholds for laminate and tiles are used, which can divide the space while simultaneously making it solid. They frame stair steps, podiums, exits, transitions between rooms from laminate to tile.

Docking methods

Since it is no longer customary to equip door frames with thresholds, the junctions between the floors of adjacent rooms are also joined with an additional profile, hiding the gaps. It doesn’t matter whether they are made only with laminate or in combination with ceramic tiles. Connecting lines can be straight, curved, or complex. Floor surfaces can be in the same horizontal plane, with a slight difference in height. There are many strips and profiles that help hide all transitions and irregularities. They can be found on the shelves of almost any building materials store.

In addition to thresholds, there are other ways to join heterogeneous elements. It is impossible to accurately determine their effectiveness, but it is necessary to get to know each other better. The transition from tile to laminate can be done using:

• sealants (foam, paste, mastic) - they can be used to seal seams of any configuration. It is important to choose a sealant that will have good adhesion to tiles and laminate. The connection turns out to be almost eternal. This is both an advantage of the method and its disadvantage. If repair work is necessary, all floors will have to be dismantled. Since sealants adhere tightly to laminated surfaces and tiles. They can only be used if the height of both coverings is absolutely the same;
• Cork expansion joints are completely new products that are already popular. If the work is carried out exactly according to the technology, the transition turns out neat and beautiful. The installation process is completely simple; the compensator is installed using a regular screwdriver. Preparatory steps take a lot of time and require special care, since the seam must be the same depth and width along its entire length. Any damage to the edges of the coatings is not allowed. This is especially true for laminate.

Sealants

Cork expansion joints

Of all the ways, the most convenient option The interface between different quality materials is the threshold between the tiles and the laminate. A large number of market offers building structures make it possible to give the floor surface a neat, finished look.

Types of thresholds for laminate and tiles

Classification connecting elements The joining of ceramic tiles and laminate can be done based on several criteria: materials, purpose, connection methods. The most commonly used raw material is aluminum, but plastic, wood, cork, and a combination of metal and rubber are also used. According to its intended purpose, a threshold (even a completely flat element is called this) can be:

• traditional, classic, if it frames steps, external corners of the same quality or two different materials. It has the shape of an internal or external corner. The threshold is usually made of metal, since wood or plastic are not strong enough, stairs need strong profiles. The steps bear quite a large load from the movement of people and cargo, so the top coverings are subject to increased demands;
• edging or leveling - with a small difference in levels for tiles and laminate, the thresholds are made of metal, equipped with an elastic rubber gasket. It is the rubber layer that compensates for differences in altitude during installation. The result will make itself felt - you get a fairly smooth surface. If there is a larger difference in height, it makes sense to choose a solid plastic threshold that is suitable for the cross-sectional dimensions;
• decorative overlays used to trim the threshold during transitions between rooms. The material is used in the case of joining homogeneous and dissimilar parts. Overlays are made from almost any material. If metal is used, then it can be decorated to match the main type of floor with a finishing film; plastic strips are made in any color, to match any texture;
• curved thresholds - used when connecting dissimilar surfaces with an unusual design solution. The joint can turn out beautiful and even only when both floor surfaces are laid at the same level. Aluminum is not useful here, since it is not flexible enough and arbitrary bends cannot be made. Therefore, durable plastic, cork, is used. It’s not easy to install such a threshold, but it looks very nice;
• finishing - used when framing the edges of the hallway covering, at the exit to the balcony, loggia, or at the podium. This type of threshold is very often used as a multi-level threshold when connecting laminate and ceramic products.

Final

Decorative

Classical

Curvilinear

Docking

There remains one more option for dividing thresholds into types - the connection method. The cross-section of the product can be a one-piece letter H, a flat bar, or a composite letter H, consisting of two T-shaped bars. A profile in the form of a solid letter H, laid on its side, is used by laying the covering on both sides of the plank. Fastening to the floor is done with self-tapping screws. In the latter option, one of the strips is installed from the bottom of the seam, with the leg up. The second, having a decorative surface, is mounted on top, then connected with a lower clamp.

Which one is better to choose?

It is impossible to unambiguously determine which threshold and which material to choose from. For the simple reason that for different conditions connections require your own products. By constructive solution thresholds must be purchased according to their intended purpose, as well as the intended installation method. Sometimes you need flat overlays and corners, sometimes you can’t do without a special profile, sometimes only a cork product can help. If we are talking about the material used in the manufacture of thresholds, it is chosen based on the intensity of use floor elements. It should be taken into account that wooden crafts, soft plastic moldings are highly susceptible to abrasion and will quickly stop serving. Metal profiles are not suitable for creating complex curved connections. Then you need to opt for plastic products, supplemented with rubber material, designed to heat up, bend, and take the desired configuration.

Texture, color solutions will not cause problems, everything is much simpler. There are no restrictions here. Plastic thresholds are available in such a wide range of colors that they can satisfy the needs of any design option for floor design, general interior premises. Metal products solve the issue somewhat differently. Designers have come up with special film decorations that are highly wear-resistant. They can be matched to the color and texture of the laminated or tiled surface used.

Installation Rules

There are two ways to install connecting products: open and closed. The first option is used for installation metal elements. They call it open because the caps of the fasteners remain visible, which must subsequently be painted with the color of the threshold. Fastening is carried out using ordinary plastic dowels equipped with self-tapping screws. The metal plane for this purpose has holes made at the factory. With the hidden method of fastening thresholds, the lower part of the profile is first installed, screwing it to the ceiling with self-tapping screws or placing it on strong glue. On this part of the profile there are special clamps for the top bar. The decorative part of the molding snaps securely into place, resulting in a very strong connection.

The floor covering should not completely occupy the threshold gap. It is necessary to create a compensation gap that will not allow linear changes coatings for temperature changes.

Features of installation of flexible thresholds

If framing straight thresholds with a corner causes practically no problems, then the installation of curved connections has some peculiarities. They should be considered in a little more detail. Neither wood nor metal are suitable for these cases due to their inability to bend at any degree. There are two possibilities to connect the laminate floor and tiles: use cork inserts or a complex plastic profile. The cork is easy to install, but its installation requires thorough, thorough preparation. A balsa wood expansion joint cannot cover the imperfections of uneven cutting of laminate or tile edges. In order for the joint to be neat and beautiful, the gap between different coatings should be no more than two millimeters.

The joining surfaces of laminate and tiles are located strictly in the same plane. Their edges are carefully leveled, polished, and very precisely adjusted to one another.

If ceramic tiles do not cause problems, laminated boards are difficult to process in this way and will require additional labor and time. The result is worth it - the joints made with high-quality cork look very beautiful.

For a curved connection, a plastic molding also needs a curved one. It is impossible to purchase one with ready-made radii. Typically, products are sold that have a relatively small bend. To get the rail of the required configuration, before installation work needs to be softened. This can be done using a hair dryer or simply immersing it in hot water. After such actions, the material becomes pliable and easily bends according to the given parameters. This profile consists of two parts.

The lower part is attached to the floor along the contour of the seam. It is mounted in parallel with the main covering. On the side of the laminated surface, it is necessary to provide a small gap to create an expansion joint. Since boards can shrink and expand with temperature changes. Albeit insignificantly, but in order to avoid deformations, this must be done. The upper part is carefully connected to the fastening clips located on the lower element. In order not to damage the surface of the decorative profile and floor covering, you should not use an ordinary hammer, but a wooden mallet. Plastic strips are convenient because they can hide a fairly large height difference between the coverings. There are profiles that can eliminate the vertical difference between laminate and tiles up to 18 mm.

Video of installing a threshold between tiles and laminate

In the video you can see how to properly form the joint between tiles and laminate.

How to make a technological joint between tiles and laminate

The bends at the point of contact of two floor coverings look beautiful in design projects and in photographs, but making them in real life very hard. In this lesson we will look at how to make a technologically advanced joint between tiles and laminate on straight and winding areas.

Serpentine and complex transitions look beautiful only on projects and cause a lot of inconvenience

Most often, joining laminate and tiles has to be done in the following cases:

• In the hallway and kitchen - so as not to spoil the laminate from moisture and increase the wear resistance of the coating;
• For zoning a room;
• Under the doorway.

Quick navigation through the article

Options for connection nodes

There are several ways to make a technological connection between laminate and tiles:

• Flexible PVC profile– Suitable for any curved bends. Consists of a base and a decorative nozzle.

Flexible PVC profile Cezar

Installation of aluminum threshold

A regular threshold with holes is installed as follows:

• Cut the threshold to the width of the doorway.
• Mark the drilling points at the joint.
• Drill holes, insert dowels and secure the threshold with self-tapping screws on top.
• To screw in self-tapping screws, use a screwdriver or screwdriver with minimal torque, otherwise the threshold will bend.

An important nuance: the measurement is taken taking into account the platband, and not just between two extreme points boxes. Then the threshold is trimmed to fit the trim to avoid gaps.

If the threshold has hidden fastenings:

• The holes are marked on the base.
• A self-tapping screw with a dowel is inserted into the groove on the underside of the threshold.
• Holes are made in the floor.
• The threshold with the dowels on is inserted into the holes and hammered to the end. To avoid damaging it, strike it through a block pad.

Instructions for installing a threshold with hidden fastening at the junction of laminate and tiles

The standard fastening has a significant drawback: the BM 6x40 dowel has a large gap between the head and the arch of the threshold, so it will not be installed securely. To avoid this, it is better to take 8x60 dowels and grind off the head on both sides for a tight fit.

To remove the backlash, take a larger dowel and file the head

The easiest way is to install a threshold with a self-adhesive base:

• Mark the outline of the sill on the flooring to ensure it is glued evenly in the center of the joint.
• Remove the protective film from the self-adhesive base and stick it on.

Conclusion

From a practical point of view, the appearance of additional thresholds at the junction is not very convenient - the floor becomes more difficult to clean and you can trip over it.

Also keep in mind that the laminate must be laid in a floating manner, so you should not use sealants, grout or foam to fill the joints.