Crafts from pipes: useful tips and ideas on how to make amazing things from PVC pipes. What can be made from PVC pipes (38 of the best ideas) To make strawberries tastier than your neighbors'

August 1, 2016
Specialization: facade finishing, interior decoration, construction of cottages, garages. Experience of an amateur gardener and gardener. We also have experience in repairing cars and motorcycles. Hobbies: playing the guitar and many other things that I don’t have time for :)

At first glance find PVC application pipes are not easy to use except for their intended purpose. But if you look at this material as a construction set, then several will probably appear in your head at once. interesting ideas. In this article, as you probably already guessed, I will tell you how to do some useful homemade products from PVC pipes at home.

Features of assembling parts from PVC pipes

First of all, I would like to note that PVC pipes are a fairly durable material, which allows them to be used for a variety of purposes. In particular, some home craftsmen even use them to make roof racks for cars that are installed on the roof.

As a rule, in addition to the pipes themselves, tees and angles are used to make various crafts. Thanks to them You can assemble any frame structures from pipes, just like from a children's construction set.

In cases where it is necessary to obtain a strong permanent connection, the joints are coated with a special one, which, in fact, ensures welding of the parts. The instructions for working with it are quite simple:

1. first of all, cut the workpiece to the required length;
2. then cut a chamfer from the end of the workpiece so that there are no burrs left that could scrape off the glue during the process of connecting the workpiece to the fitting;
3. then apply a uniform layer of adhesive to the adjacent surfaces of the workpiece and fitting;

1. after that, insert the pipe into the fitting until it stops and turn the parts relative to each other by 90 degrees. They need to be left in this position for some time until the joint is securely glued.

Using this principle, you can assemble any structure.

Types of products

I would like to point out right away that PVC pipes you can make any crafts that only your imagination tells you. And as an example, below I will tell you how to make the following products from this material:

• laptop stand;
• rack;
• tent;
• flute;
• blades for a wind generator.

First of all, let's look at how to make the most simple craft– laptop stand. To make it you will need a minimum of parts, namely six corners and five tubes.

This design is assembled very simply and quickly:

1. First of all, make two L-shaped parts of the same size. At the same time, the dimensions of the long tube depend on the depth of the laptop, while the short tubes determine the height of the stand, so their length is selected individually according to your wishes;
2. then connect the two L-shaped parts with a crossbar, which is attached to the short tails, as shown in the photo above;
3. Next, install the corners that will hold the laptop so that it does not roll off the stand;
4. To finish the job, you can paint the structure with spray paint in any color you like.

This completes the process of making the stand. Now your laptop will not heat up when standing on a table or, for example, on a sofa. In addition, it will be more convenient to work with it.

Rack

Making a shelving unit from PVC pipes is not much more difficult than making a laptop stand. If the structure is small, then it is based on four racks, which are connected to each other by jumpers. Sheets of plywood or chipboard should be placed on these lintels as shelves.

If the rack is large, its design can be complicated and it can also be provided with fastenings to the wall. These can be L-shaped brackets, which you can later attach to the wall with clamps.

In the process of making a rack, as with all other crafts, make sure that all paired pieces are the same length so that the structure does not turn out skewed.

Such a rack can be useful to you in the country house, in the garage or in the pantry.

Making a tent

A tent is a more complex structure; in addition, in addition to the pipes themselves, you will need a tarpaulin or other suitable fabric that will be stretched over the frame. However, there is still nothing super complicated in this work.

So, the process of making a tent is as follows:

1. start work by preparing a drawing, which should show all the parts with dimensions, as well as the location of the connecting fittings. The design is based on four pipes, to which four racks are attached.
   Attached to the posts from above top harness which serves as a roof. I note that it is easier to make a lean-to tent, since it is quite difficult to find tees or 45-degree corners.
   If the tent has enough big sizes, include additional jumpers and racks in the structure to increase its strength;
2. Next, you need to cut the tubes into parts of the required length, and also prepare the fittings. It should be noted that the fittings must be of high quality, since the strength and durability of the structure depends on this;

1. now you need to sew the awning according to the drawing;
2. To complete the work, assemble the tent without gluing the joints so that the structure is collapsible, then pull the awning over it.

As a result, you should get a high-quality tent, and its price will be disproportionately lower than a similar product from a store.

Making a catamaran

For those who like to relax on fresh air and tourism, we can recommend making not only a tent, but also a catamaran for walking on the water or fishing. Like all the other products described above, making a catamaran from PVC pipes with your own hands is quite simple.

To make it, we will need three sewer pipes, each one and a half to two meters long. The diameter should be as large as possible.

The design is made as follows:

1. Connect large pipes with smaller diameter pipes. To do this, you can use clamps or make your own fasteners;
2. Put plugs on large pipes to prevent water from getting into them;

1. On the resulting base, place a shield made of slats or other materials, which will serve as a deck. In this case, you need to attach a seat to the shield.

You can steer such a catamaran using oars, like a kayak. Of course, if you wish, you can make more complex design with pedals and paddles.

If you wish to provide Vacation home autonomous electricity, then you will need PVC pipes for the manufacture of blades. To do this, prepare blanks with a diameter of 160 mm. They can be used to make blades up to 160-180 mm long; you should not make them longer, as they may break off.

I note that the process of calculating the profile is quite complex, requiring certain highly specialized knowledge. However, you can use ready-made template, which only needs to be increased to the desired scale.

The blade manufacturing process in this case will look like this:

1. first of all, you need to enlarge the template and print it on a scale of 1:1, using several sheets of paper;
2. then, according to the template, you need to apply markings to the pipes;
3. Next, according to the markings, you need to cut the blades from the PVC pipe;

1. after that, round the edges and sand the ends, as shown in the diagram above;
2. after execution required quantity blades, mounting holes should be drilled to attach them to the generator.

The number of blades depends on the power of the generator. If its power is 30 W, four blades will be enough for a wheel diameter of 1.44 m.

Making a flute

From PVC pipes you can make not only various useful household products, but also musical instruments, such as a flute. Even if you don't know how to play it, it can be a great decorative item.

To make a flute you will need following materials and tools:

In general, the process of making a flute is quite simple, however, It is extremely important to carry out the markings correctly, since the pitch of sounds depends on it. Accordingly, if the markings are incorrect, the flute will not build.

Also keep in mind that the markings may vary depending on the scale and octave in which the instrument will be played. But let’s not go into musical theory, but consider as an example how a shakuhachi flute is made in the key of D (re):

1. stick to the end of the pipe, having first removed the stopper inside it. You can also use a cap by cutting off the end wall;

1. then sand the end and draw a tangent line to the circle with a pencil internal diameter tubes, as shown in the diagram;

1. then saw off top part couplings along the intended line at an angle of 25-30 degrees to the longitudinal axis of the tube, i.e. as shown in the diagram above;

1. then polish the bevel with a file to form a notch of 3-4 mm;

1. after this, round off the lower part of the mouthpiece, which will rest against the chin when playing;
2. Now you need to make a sound. Without holes, our flute should play the note "D";

1. then draw two opposite straight lines parallel to the axis of the tube and mark along them, as shown in the diagram above;

1. then drill holes according to the markings. For the third hole, use a drill with a diameter of 9.5 mm, and for the rest - 10 mm;
2. now tune the flute using the tuning fork, taking into account that the larger the diameter of the hole, the higher the sound when it opens;
3. When the flute is in tune, remove small chamfers from the edges of the holes using a sharp knife;
4. To complete the work, decorate the flute, for example, by gluing multi-colored strapping or electrical tape to it. At this point, the flute made from PVC pipe is ready.

That, perhaps, is all the crafts made from PVC pipes that I wanted to tell you about.

Conclusion

VVC pipes can be used to make a wide variety of crafts that only your imagination can tell you. Therefore, above, as an example, we looked at only a few diverse products that would not be difficult for any home craftsman to make on his own.

See the video in this article for more information. If there are any points you don’t understand or you encounter difficulties during the work process, ask questions in the comments, and I will be happy to help you.

August 1, 2016

If you want to express gratitude, add a clarification or objection, or ask the author something - add a comment or say thank you!

For those who like to design various crafts from scrap materials, we present a whole range of different things that can be made from plastic pipes. Often a lot of remnants of PVC pipes remain after repairs. From this construction waste Can make great crafts for the interior.

How to get a bend on a PVC pipe

The technology for making crafts from pipes is to give the material correct form. To do this, it can be heated, cut or joined in various ways.

In order for the pipe to be flattened, it must be heated, and a bend is obtained in the same way. Cut plastic material with a hacksaw for metal, then the cut area will be smooth and it will be more convenient to attach it.

How to connect plastic pipes into a single structure

There are many ideas of what can be made from PVC pipes. But in order for the product to be strong and reliable, all joints must be connected correctly. There are three types of installation:

• Application of socket and seal;
• Cold welding method;
• Bolted connection.

The simplest connection can be called the first joining method. Its disadvantage is that ready product will not have sufficient rigidity.

But such items can be disassembled and the material used for another craft. Silicone is used as the bonding compound.

Using glue to fasten the pipes will give the joints a secure fit. But this process is quite labor-intensive, since the surfaces to be joined must be treated and degreased. After the glue has been applied to the materials, they should be connected by pressing against each other for 1 minute. After this, the parts are left to dry.

It is difficult to connect pipes with bolts, but such a product will be strong, and the structure can be easily disassembled and reassembled. If you use various fittings and tees, you will get a design of any shape and complexity.

Creative crafts for the interior

From pipe sections of various diameters and lengths you can get a lot of different household products. There's a lot on the Internet interesting crafts from pipes, and to make them, it is enough to have basic skills in using construction tools.

Car trunk. To make such a device you will need plastic water pipes. It is better to choose the most reliable method of fastening them - using bolts or glue.

You can make a bicycle holder for a car in the same way. The frame will be lightweight and at the same time will last a long time.

Small bumpers for the bed. The diameter of the tubes should be small, then the product will have a more aesthetic appearance. Bed bumpers will protect your child from falling at night.

Flower pots and vases. Using a hacksaw, cut the required lengths from medium-diameter plastic pipes. Next, their outer walls are covered with a beautiful film, and a small dish with water is placed inside at the bottom. The result will be a vase for fresh flowers. Manufactured in a similar way flower pots.

Barricade in the doorway. Will not be needed large diameter PVC pipes and connecting tees. This homemade device will not allow the child to leave the nursery.

Waterfall for children. Using a homemade waterfall, you can carry out hardening procedures for children. The product requires a minimum of materials and little time for assembly. It is necessary to drill many holes in the upper crossbar through which water will flow, and it will be supplied through the lower supports.

Photos of crafts made from pipes will help you decide on the choice of product.

Homemade organizer

Such a device will help to position it more conveniently various instruments in a workshop or office. Let's look at the instructions for making crafts with your own hands.

Note!

First you need to choose what the device will be attached to. Then, having prepared plastic pipes of large and medium diameter, you need to cut off the ends on one side at an angle. This is a standard option that can be attached to the wall with self-tapping screws.

To do something similar in a portable version, you should glue all the pipe sections together. The organizer can be given any shape and color. It will keep the desk tidy, every student will need this thing.

Conclusion

On the Internet you can find different master classes on crafts made from plastic pipes. Everything is limited only by the imagination and desire of the developer.

Photos of crafts made from pipes

Note!

Note!

After any repair or construction work There is always some excess materials, fasteners and other building elements left, however, you should not throw them away at all. In this material we will tell you what can be made from a plastic pipe left after installing a sewer or water supply system, if you apply imagination and a little work, as well as some useful ideas.

In what areas are PVC pipe trimmings used?

For those who were involved in laying and installing water pipes from PVC pipes on their own, it became quite obvious that the process of fastening such sections together is quite simple. Moreover, you can create practical and necessary crafts from PVC pipes, which in functionality will not differ from traditional ones, but their design will be modern and original.

Even if you do not have special woodworking equipment at your disposal, but you have a fairly broad imagination, armed with a tool for cutting plastic, glue and fastening links, you can create very useful device. And if the resulting frame is refined with some other materials, then you can get, for example, beautiful and comfortable furniture.

In particular, to make a light chair, you need to cover the frame with fabric, and if you need to hang a shelf, you will need brackets. Be that as it may, crafts from propylene pipes will cost you much less than factory products.

Any homemade products made from PVC pipes fall into one of the following categories:

• solid - they are securely fastened with bolts and adhesive;
• folding ones are a kind of construct that, if necessary, can be disassembled and assembled independently.

Collapsible homemade devices PVC pipes are often classified as seasonal items. In principle, these can be any products - from folding chairs, gardening tools and decor, to gazebos, canopies, which can be used during summer holidays at country or countryside and disassembled for winter storage.

If we take into account already ready-made ideas, you can get quite presentable homemade products from polypropylene pipes with your own hands. They are not only practical and beautiful, but also durable and do not pose a threat to human health or the environment.

It should also be noted that, due to the availability of plastic pipes, if breakages or defects are detected in the product, the damaged fragment can always be replaced with a new one of the same diameter. In any case, such repairs will be cheaper than buying new furniture.

Making country crafts from plastic pipes has many positive aspects:

• plastic does not need regular painting, although it is quite possible to decorate it with color;
• disassembled homemade designs very compact - for example, a carport or a children's room sleeping area will be neatly placed on the balcony or in the closet until spring;
• when heated, the polypropylene profile does not emit toxic substances, so it can be successfully used in the countryside in the summer;
• for products from of this material enough high level strength;
• thanks to the variety of sizes of plastic pipes, a wide variety of crafts can be made, and fastening elements - couplings, fittings - can always be found on sale;
• crafts from sewer pipes Doing it yourself is not only room for imagination and craftsmanship, but also an opportunity to create unique items as gifts for family and friends.

Of course, many children and adults will like original children's furniture, for example small chairs or even full-fledged armchairs. At the dacha, such products will organically fit into the surroundings, because they are beautiful, light, and easy to handle. A do-it-yourself hanger made from PVC pipes, or a shelf for dishes, indoor flowers or books, will only complement the resulting interior.

The characteristics of polypropylene pipes allow them to be used not only for water supply or sewerage installations, but also for the manufacture of seemingly unexpected items. So, by combining several pieces of profile, an electric cartridge and a cord, you can make a beautiful lamp.

From white PVC pipes you can make the following types of lamps:

• floor lamps;
• desk lamp;
• chandeliers with lampshades.

However, before starting work, we advise you to take care in advance that you have all necessary materials and tools. If you still have pipe sections after repairs or your friends gave them to you, then couplings and fittings suitable diameter, most likely, you need to buy more. In addition, you will need a tape measure, a felt-tip pen, a drill, glue and screws. You also need to think about how you will bend the pipes. You may need other auxiliary materials for a number of crafts.

Examples of crafts made from PVC pipes for the home

From the waste polypropylene pipes left after construction in a city apartment, you can make many useful things.

Shoe shelves made of plastic profile

In the hallway of an apartment or house there is always the problem of compact shoe storage. Such a shelf can be made from plastic, determining its dimensions according to the parameters of the hallway.

The shoe rack can be made of 2 types:

• with short bars from which the heel sags;
• to the full width of the shoe.

Connecting elements can be done using:

• couplings mounted on glue;
• bolts;
• self-tapping screws

To make it wide shelves, you can use:

• scraps of laminated panels;
• plastic;
• pieces of plywood, optionally decorated with color.

Standing coat rack

A hanger made by yourself from plastic pipes must be strong and stable. For these purposes, it is better to use medium-diameter pipes. Additional rigidity can be given to the central axis by inserting a wooden tool holder or metal rod into it. It will not allow the hanger to sag under the weight of clothes.

The base, which provides stability, can be made in the form of a cross or wide struts in the form of a triangle. But buy ready-made hooks, quite long. They need to be screwed in place in pairs on both sides of the pipe.

For wall hanger you will have to make a slightly different design, however, if the family is large enough, then both options will be very useful at the same time.

Flower stands and flowerpots

The stand in the form of a shelf made of PVC pipes can be made free-standing or wall-mounted. You will need pieces of glass or thin sheets of plywood. However, it is undesirable for water from the pot to get on such a stand - stains and stains will remain.

Tabletop vase and organizer for small items

From short pieces of pipe you can make convenient cups for small items on desk. And if you want to make a wall-mounted flower vase, you can use halves of wide sewer pipes.

By adding decor in your favorite color, as well as gold or silver plating, you can get a truly unique product. When inserting the plastic bottom of a vase, the seam must be sealed with silicone to ensure a tight seal.

Animal crafts

From pipes you can make not only an aviary for your favorite parrots, but also mazes for cats, a dog bed, and many other products frame type for pets. A net is placed around the enclosure, having previously provided a door.

A suitable location for an aviary may be:

• hallway;
• space under the stairs;
• secluded niche;
• dead end corridor.

So that a domestic cat can exercise and stay in good shape, you can build a special labyrinth for it by covering pieces of pipe with a rope attached to glue. And you can build a comfortable bed for a dog by simply upholstering a plastic frame on short stands with a piece thick fabric.

Children's furniture

For the table and chair, in addition to pipes, you will need soft upholstery with foam rubber for seating and a piece of laminate for the tabletop. You need to take care to securely fix the legs, and also calculate the height of the chair that is comfortable for the child.

You can make a crib or even a playpen out of plastic pipes. They are completely safe for children and quite acceptable for creating children's furniture (read: ""). For convenience, you can use standard sizes factory products.

Please note that although PVC is safe, all handrails need to be disinfected as children love to lick everything.

The variety of shapes and diameters of PVC pipes allows you to create truly original decor in your apartment.

In particular, they also make such crafts from sewer pipes as:

• laundry dryer;
• frame for a basket for dirty laundry or a box for household waste;
• baskets and niches for tools and small components;
• shelves for books, small computer equipment or mirrors;
• cases for sharp objects, e.g. kitchen knives;
• gift crafts;
• screens and screens to delimit areas of the room.

What can be made from PVC pipes for the dacha

Greenhouses and greenhouses

Making a greenhouse out of lightweight plastic and covering it with film is an idea that many gardeners will like, because this is a very necessary structure in the country.

In addition, you will need:

• rolled transparent slate;
• durable polyethylene film;
• permeable to sunlight polymer materials.

The entrance at the end of the greenhouse can be equipped light door or a silicone curtain made of strips. Such a structure is temporary - it is installed in the spring, and for the winter it is collected and hidden in a shed (read also: " "). This is convenient because, if desired, you can move the greenhouse to any other place near the path. In addition, there is no need to pour a capital foundation, because the structure is very light.

Vineyard arches and gazebos

From the remains of plastic pipes you can build a convenient frame for climbing plants, for example, grapes or climbing roses. It looks beautiful and the plant feels good.

Alternatively, from the same white PVC pipes can be made summer gazebo for gatherings with tea. If you plant climbing plants around it, they will gradually fill the entire space of the lattice, creating cozy shade and coolness. Since plastic bends easily, it can be used to build a structure of any shape, just like metal or wood. And the gazebo will organically complement the garden exterior.

Stands and shelves for seedlings and flowers

To save space in a house where a lot of seedlings are grown, they can be placed in several tiers on a shelf made of polypropylene pipes. You just need to provide additional lighting, securing it directly to the rack. Over time, the position of the spotlights will need to be changed so that the shoots are strong and even.

In the summer, on such a rack in the garden you can place flowering annuals which will give bright accent general decor.

Devices for vertical growing of plants

You can make a structure for vertical planting of strawberries from large-diameter pipes, drilling holes at equal distances for symmetry. Other structures are also relevant in the country, for example, hedges or all kinds of hydroponic structures, which will significantly save space if the area is small, and will also eliminate the need for frequent grueling weeding of berries.

Frames for hydroponic growing plants in winter time can be placed in an apartment, organizing an analogue of a winter garden.

Car awnings

At the dacha, the problem often arises of where to park the car so that it does not overheat in the sun or get wet in the rain. This design can be made from PVC pipes. It is light, aesthetic and quite reliable. You only need to stretch a camouflage mesh or flexible slate over the frame.

Country furniture

For your dacha, you can make not only a sofa swing from PVC pipes with your own hands, but also a lot of other garden furniture on which you can relax after working day in the garden. For example, very original solution there will be a plastic cart for delivering food to the barbecue or grill. Preferably all garden furniture be made in one color scheme so that it is not too varied.

To combine the design, it is better to choose some general material For:

• upholstery of chairs and armchairs;
• countertops;
• awning covers.

Shower cabin

In the summer, it is quite possible to build a shower stall on the site. Its basis will be the same PVC pipe, which can be disassembled and stored in a secluded place for the winter. You need to attach a container to the top of the cabin to heat water from the sun, and stretch opaque material in the gaps between the frame grille. You can make an improvised heated towel rail inside the cabin.

Children's house

But children will really like the canopy equipped for them, where they can hide and play Interesting games. Such an awning can be made permanent or portable so that parents can keep an eye on their children.

In addition, such structures made of plastic pipes as:

• bicycle parking;
• storage space for tools;
• fence for the site that does not require frequent repairs;
• dog enclosure;
• portable summer poultry house;
• design for a swimming pool made of thick film with a sun lounger.

Thus, handmade crafts for your home and garden will delight you not only with their appearance, originality and economy, but also ease of assembly and availability of materials. In addition, you will be able to reveal your creative potential and, at the same time, do something useful.

Plastic pipes are one of the most popular materials for crafts. And this is quite natural: they are publicly available, inexpensive, cutting and installation do not require special skills or special equipment.

DIY crafts made from plastic pipes will look especially harmonious in the countryside. We share a selection of fresh ideas that motivate creative experiments.

1. Water procedures

On a hot summer day, you really want to cool off at the dacha, quickly and conveniently. A shower made of plastic pipes will help with this. To a plastic structure with holes you need to attach watering hose. All that remains is to turn on the water and enjoy the pleasant coolness.

2. Comfortable seating

The more plastic pipes are included in the design of a chair or chaise lounge, the more more weight he will be able to bear it. If you need a high chair for a child, then it is enough minimum quantity pipes, and the seat can be made of thick fabric. It is better to make a chaise longue for an adult entirely out of plastic.

3. Air beds

Even the most ordinary walls country house, made from nondescript building blocks, will transform hanging flower beds. Even a child can make such crafts from plastic pipes for the dacha. Pipes with holes, plugs covering their sides, and metal fastener- that's all you need to make unusual flower beds.

4. Drying things quickly is easy

It’s worth spending a little time and you can make a compact clothes dryer from plastic pipes. Such a product will weigh very little, so it can be easily placed in the most illuminated place on the site.

5. To make strawberries taste better than your neighbors'

It often happens that strawberries grown in the usual way- in the garden, ripens unevenly and can even rot. After all, the sun may not reach one side of it at all, since often the fruits lie on the ground or are under the leaves. A vertical bed made from a piece of large-diameter plastic pipe will help solve the problem. Strawberries, like a climbing plant, will definitely find a way out - through the holes in the plastic.

6. Plastic fence

Create an external fence separating the street from personal plot, from plastic pipes - perhaps not the best idea. But using them to protect an animal enclosure or another area of ​​the dacha is a reasonable decision. To make this mini-fence look like a real one, paint it with silver paint.

7. A fabulous place for friendly gatherings

It’s easy to assemble an unusual gazebo from pipes, which will surely become a favorite place for country holiday. Stretch ropes between the pipes and plant climbing plants, such as ivy, underneath them. When he grows up, it will be pleasant to be in the gazebo even on a sunny day. To make the gazebo look more picturesque, use brown pipes.

8. Efficient watering system

Water the lawn or other large area at the dacha is not the most exciting activity. A garden irrigation system made from plastic pipes will help you get rid of it. Simply run a water hose to several connected sections and turn on the water. If you make the holes small, you will get a drip irrigation system.

9. Simple and mobile greenhouse

Thin pipes become the main material for making a greenhouse. The main advantage of such a garden craft made from plastic pipes is its mobility. At the end of the summer season, the greenhouse can be easily disassembled, and the next season it can be reinstalled in any chosen location.

10. Fencing for the terrace

A small plastic fence for the terrace will show that the owners of the dacha are not expecting guests at this time. In addition, you can make a regular fence from sections of plastic pipes. To make it look more impressive, paint the plastic in a bright color.

11. Vertical flower bed

Growing seedlings is quite a troublesome task. A flower bed made of plastic pipes will help make this process more organized and convenient. If you spend a little more time, you can supply water to it, and then the process of watering the seedlings will become automated. It is enough to make holes in the bottom of the containers in which the plants are planted.

12. Fun swing

Plastic pipes with ropes holding the swing will become convenient handrails. The manufacturing process for such a swing is quite simple. Eight pieces of pipe with holes, rope and a board are all you need to make them.

13. For lovers of outdoor activities

Active recreation in which all family members participate - great option spending time at the dacha. Both adults and children will be captivated by the game of football. Finding the ball won’t be difficult, it’s just a matter of looking behind the goal. They can be assembled from plastic pipes. You will also need a piece of any mesh.

Support for flowers.

Decorate your terrace or veranda flowering plants - great idea. But carrying out many pots and placing them in different places can become a tedious task. A flower stand made of plastic pipes will help solve the problem. It weighs very little, so rearranging it if necessary is very easy.

16. Laconic flower pots

Identical flower pots will make the interior of a country house more stylish and cozy. If you don’t want to spend extra money, you can make them from equal sections of plastic pipe. As a bottom flower pots plugs for PVC pipes protrude. They just need to be put on one of the edges.

17. To feel like a knight

Depending on the type, some pipes are quite easy to bend. This is possible if the product is of small diameter and made of flexible plastic. If you cannot bend the pipe, you can heat it slightly. For example, construction hairdryer or over an open flame.

Furniture, greenhouses, transport and even decorations - from plastic and aluminum pipes you can make useful and beautiful objects for any garden! Even the pieces remaining after installation of engineering systems will come in handy. Don’t rush to throw them away - in our selection we offer a lot of ideas on how to give them a second life.

PVC pipes are a readily available material. They have many other advantages: White color(most often, you don’t even need to repaint them), ease of use and product availability various sizes, diameter and shape. So, if you wish, you can find material to implement your most daring ideas. What else will be useful to you in your work - fittings, a hacksaw, a tape measure, glue, will not be superfluous and sandpaper– to smooth the cut edges.

So let's get started!

Let there be light!

Candlesticks are perhaps exactly the kind of interior item with which you can start your experiments. Just take the pieces of pipe you like, attach them to the stand and you're done! You can choose any style - from deliberately rough, for a dacha, to high-tech or even sophisticated.

More complex products are real lamps made of pipes. Look at the variety! Anyone can make a designer lamp: you can make cuts in a pipe, cut out an openwork pattern, or simply connect several pipes in a fancy composition.

Israeli designer DavidBenatan for his collection of such lamps - KozoLamp - uses not only pipes, but also tap valves, with the help of which the light is turned on and off. By the way, the products are quite expensive - the “cheapest” of the lamps will cost $200.

For home

There are always a lot of things in the hallway that are difficult to neatly place on the existing shelves. Look - a whole wardrobe can fit on such a ceiling crossbar!

And you can save money on a regular one - surely such a product made from pipes will come out cheaper than one bought in a store.

And the shoes will look much neater in such simple shelves.

Folding chairs, easy to make, are always useful both in a city apartment - for guests, and in the country: they can be placed anywhere in the yard or garden, they are not afraid of weather conditions and dirt.

You can design the most various tables, chairs, benches - it’s interesting for yourself, and guests will probably ask how much this “designer” product costs.

Many people like to make furniture. But you must admit - it’s one thing to work with wood, another thing to assemble a product from pipes like a construction set. You can quickly make a budget sleeping place or come up with something more complicated.

You can also make compact shelves or a cabinet for storing alcoholic beverages - it’s easy to assemble and looks original.

If you want a bookcase, please!

Cut PVC pipes into thin rings and glue them to the wall, it will be very beautiful!

Using pipes, you can divide the space by making partitions in the form of an openwork wall or shelves.

For the site

Country life always involves a lot of tools and equipment that should always be at hand. Both small items and shovels can be stored using PVC pipe scraps.

You can even make a carport with their help.

Bicycle rack (and in big family there are always a lot of them).

Or the transport itself - a bicycle, a car for children, and even a velomobile.

And a wheelbarrow at the dacha will not be superfluous - to transport building materials or harvest from the dacha. It is enough just to attach suitable wheels to the pipe structure, depending on the purpose of this device.

Useful for suburban area and a dryer for towels and linen made of PVC pipes.

And the site itself can be fenced off.

...Or make an interesting gate from scraps. This is exactly what he designed landscape designer from Seattle Scott Ackley for one of his clients. Due to the fact that the gate is transparent, shady corner the area became lighter.

To make a gate, you must first make wooden frame and nail it to a sheet of plywood. Then cut rings from plastic pipes of different diameters (the designer got about 200 of them). Fill the frame with rings, finding the optimal position for each to create a tight pattern with no gaps. Secure the rings with clamps. Cover the resulting layout with spray paint. And then you can fasten the rings liquid nails and leave the composition right in wooden frame, using it as a frame for a gate. A more durable product will be obtained if all these operations are performed with aluminum pipes. But then you will need to solder them to each other and use them without a wooden frame.

For plants

With a minimum of effort, the pipes will turn into cute plant pots.

Or the whole system for growing vegetables, flowers and other plants using the hydroponics method.

In the spring, it’s rare that a dacha does without hotbeds and hothouses. Assemble them from polypropylene pipes (they will need to be bent) and connecting elements- an inexpensive and easy way to get early vegetables and herbs. By the way, such shelters can also be easily dismantled when the need for them is no longer necessary.

In addition to pipes, you will need a roll of 6 mm film, fittings and several boards treated with an antiseptic, plastic ties(clamps), metal loops, door hinges and handles (for the greenhouse door), nails, screws.

Well, in fact, you can see how to make such a greenhouse in this video.

For children

Children at the dacha are a separate issue, and we have already told you more than once how to organize them so that it will benefit them and you will not be interfered with in managing the housework. We suggest implementing a few more ideas using pipes. For example, make children's chairs that can accommodate both your own and your neighbor's children, of different ages.

For kids, you can organize a playpen by enclosing the play area with PVC pipes.

Swing, house, Summer shower, football goals - all this is easy to assemble, install where you need it (or move it from place to place so that the children are always in sight), and the children’s joy will know no bounds!

As you can see, from water pipes You can do anything - if only you have imagination and desire. And in conclusion - one more idea. Try your hand at making original jewelry for the ladies! Of course, these amazing bracelets are also made of PVC pipe, about 8 cm in diameter.

To make an “antique” bracelet, sand a piece of pipe, apply wall putty mixed with glue on it, and give the surface the desired texture. When the coating has hardened, paint the product with black paint and spray it with a golden aerosol, lightly rub it in an “antique” manner. Then glue on a decoration, for example, a large themed button, cutting off an eye from it, or a brooch.