Bathtub restoration using liquid acrylic glass. Restoring the coating of cast iron bathtubs
Change cast iron bath- a rather labor-intensive and economically expensive process. Therefore, it is better to use the services of specialists who will restore the product, extending its service life. The company is engaged in restoring bathtubs using effective methods.
We offer cast iron bathtub restoration services at the best price in Moscow
We repair old cast iron bathtubs since 2003. Our company fulfills orders quickly and efficiently. A cast iron bowl can be updated in several ways. We offer services:
Acrylic liner;
Self-leveling bath;
Enameling.
Each of them has its own specific advantages. The most suitable coating for repairing a cast iron bathtub is liquid acrylic, which is also called “irrigation bath”. This technology consists of applying a special product to the surface of the bowl. It dries evenly and forms a glossy snow-white surface with a service life of more than 10 years.
It’s no wonder that cast iron bathtubs are extremely popular among buyers. Even though the market is flooded with acrylic and steel taxes, cast iron models not only do not go out of fashion, but also strengthen their position. The reason for this demand is quite simple - a cast iron bathtub is durable, and at the same time it retains heat well. However, over time, the coating of a cast iron bathtub wears out and chips, stains and cracks appear on it. In such a situation, there can only be two options for solving the problem - restoring the enamel on a cast-iron bathtub or buying a new one.
If we talk about purchasing, then it is worth considering a number of points that significantly affect the price of the issue, namely:
- besides the cost new bath, the dismantling of the old model and its disposal should be taken into account;
- the costs of delivery, transportation and loading of the purchased bath significantly increase its final cost;
- restoration of cast iron bathtubs allows you to avoid such issues as installation and connection, because when restoring the enamel you will not have to overpay for installation and dismantling.
Restoration of cast iron bathtubs
If you are not used to wasting money and time, you will certainly be interested in such a service as restoring cast iron bathtubs. Modern technologies and innovative materials allow as soon as possible return the bathtub to its radiant appearance and presentability without special expenses.
Our advantages
High-quality materials from Germany direct from the manufacturer
The material is non-toxic, odorless! Hardening - 20 hours
We work without prepayment, under a contract. Responsible approach
Experienced craftsmen. We have been restoring bathtubs for over 10 years
Warranty up to 5 years! Material service life 15 years
Prompt order fulfillment. Technical support
Price for restoration of cast iron bathtubs
Bath 120 cm.
- German quality.
- Drying time: 20 hours.
- Service life 15 years!
RUB 3,800
3,500 rub.
Bath 150 cm.
- German quality.
- Drying time: 20 hours.
- Service life 15 years!
4,000 rub.
3,700 rub.
Bath 170 cm.
- German quality.
- Drying time: 20 hours.
- Service life 15 years!
4,200 rub.
RUB 3,900
Restoring enamel on a cast iron bathtub
Restoration of cast iron bathtubs in Moscow is one of the services offered by our company. Even if your bathtub has completely lost its original appearance, do not rush to look for a replacement. Unique technology restoring the enamel on a cast iron bathtub will transform it, eliminating the need for an expensive purchase.
By contacting us, you can be sure that:
- all work on restoring a cast iron bathtub will be carried out high level;
- You will be provided with a guarantee for all types of services provided;
- the quality of work will not cause any complaints;
- the cost of restoration will not hit your pocket.
Call us and make sure that restoring the enamel on your bathtub is quick, simple and very profitable!
Additional services
| Name of service | Price |
| Installing an acrylic baseboard on the side of a bathtub | 1300 rub. |
| Installing our screen under a bathtub on an aluminum frame (regardless of the length of the bathtub) | 2200 rub. |
| Installation of a new siphon (re-visit of the technician 24 hours after drying. New siphon, corrugations, cuffs, connection + warranty) | 1250 rub. |
| Installation of acrylic liner 150 cm. | 4000 rub. |
| Installation of acrylic liner 170 cm. | 4200 rub. |
| Call a measurer for consultation and correct measurement of the bathtub | 500 rub. |
| Retaining the old piping (siphon), replacing only the drain grate with a new one | 150 rub. |
| Dismantling old cast iron trim | 400-600 rub. |
| Removing the plastic trim | For free |
| Cleaning non-factory enamel | from 400 to 800 rub. |
| Color color | 400 rub. |
| Removing chips from a bathtub | 150 rub. |
relevant because A cast iron bathtub is a very durable, if not eternal, thing. The same cannot be said about its coating, which wears out over time and spoils the appearance of the entire bathroom. What's the solution? Removing a cast iron bathtub is quite a labor-intensive and expensive task, which includes not only the cost of purchasing a new bathtub, but also the cost of updating the tiles, which will most likely suffer in the process. In addition, most people know that a cast iron bathtub has a lot of advantages and it’s simply a shame to throw it away.
ANYTHING YOU NEED:
Fortunately, modern repair technologies make it possible to restore a cast-iron bathtub beyond recognition. To do this, you can use one of three options:
- Surface coating with enamel;
- Surface coating with acrylic;
Restoration of a cast iron bathtub with enamel
This method allows you to return the bathtub to its whiteness and shine, while saving the owners a considerable amount. All work can be done independently; no special skills are required. The main thing is thoroughness and accuracy.
Very important preparatory stage, the purpose of which is to remove the old coating, clean small cracks and rust. This is done using abrasive powder and sandpaper manually, or speed up the process with a drill with an abrasive wheel. After cleaning, the bath is thoroughly cleaned of all particles and dust, degreased and dried.
The enamel is applied to the prepared surface in a thin layer using a brush or roller. It is recommended to apply 2 to 4 layers. After complete drying, which requires at least 7 days, the bath will be ready for use.
The main and, perhaps, the only advantage of this method is its low cost. Enamel coating applied at home lasts no more than 5 years.
Restoration of a cast iron bathtub with liquid acrylic
Preparing a bathtub for acrylic coating follows the same procedure as for enamel coating. The surface must be matte, dry, grease-free and heated. The mixer is first removed and the drain and overflow holes are sealed. Acrylic is applied without the use of brushes or rollers, pouring it in a thin stream onto the sides of the bathtub and allowing it to flow freely down the walls. At the bottom, the material can be leveled with a spatula.
The advantages of acrylic over enamel are undeniable. Acrylic is more flexible, stronger and more durable. Its shine and whiteness delight residents for years. It is easy to clean even without any special products. Self-leveling acrylic dries many times faster than enamel, so the bathtub can be used in just 1-2 days. You can add a color to acrylic that matches the interior of the bathroom and make the bath a full-fledged part of the interior.
This method allows you to get almost new acrylic bath, which will cost several times less. Its essence is that an acrylic insert made to the same dimensions is installed in an existing cast-iron bathtub. There are many ready-made liners sold in stores, but it is better to use the services of professionals who will take accurate measurements of your bathtub and carry out high-quality installation in compliance with technology.
The most important thing is to ensure a high-quality fit of the surfaces to each other and tightness. Otherwise, fungus may begin to develop under the liner. Experienced master will complete the job within 2-3 hours. After this, the bath needs to be filled with water for a day so that the liner is securely fixed.
Acrylic has established itself as a durable, strong, safe and beautiful material. An insert or acrylic coating will allow the bath to last for more than one year, provided proper care. Enameling as a restoration method can be used in cases where the budget is very limited.
Restoring a cast iron bathtub: which is better?
Restoring a cast iron bathtub is much easier and cheaper than replacing it with a new one. Applying a new top layer will delay the purchase of a new product and complete renovation of the bathroom. How long this period will be depends on the right choice material.
Enamel
Enamel attracts with its low cost, but this is precisely the case when momentary savings can result in even greater expenses in the future. The very modest service life of the enamel coating makes it financially very unprofitable.
It may seem logical to some that it would be better to re-enamel a cast-iron, once enameled bathtub. If we were talking about powder enamel, which is applied to the surface in an industrial environment, perhaps this would be so. However, at home, bathtubs are coated with a completely different enamel composition, the service life of which cannot be compared with the industrial one.
Enamel paint cannot create a sufficiently dense and durable layer for the coating to be durable. Even minor household damage to the surface leads to chips and cracks, and rust and hard water salts will only contribute to its further destruction.
One of the features of enamel is its porous structure. No matter how diligently the owners take care of the bathroom, dirt still gradually fills the micropores of the surface, making it gray and dirty in appearance.
A fresh enamel coating looks very elegant: a snow-white bathtub with a bright glossy shine. Be careful, such beauty may be unsafe, because this surface is very slippery, especially when wet. When planning the restoration of a cast iron bathtub with enamel, you should think about all the residents. If among them there are those who, due to age or health reasons, find it difficult to coordinate their movements, it is better to refuse enameling.
Acrylic
Acrylic is universal material, which is suitable for the restoration of any bathtubs, including cast iron. Proper preparation surface provides excellent adhesion and a strong, durable coating.
The most important feature and main advantage of acrylic is its plasticity, which not only ensures ideal distribution of the material over the surface, but also makes it resistant to impacts, falling heavy blunt objects and other possible damage. Thanks to this strength acrylic coating can extend the service life of a cast iron bathtub for a period of 10 years, and during this entire time the product will have a presentable appearance.
Caring for acrylic coating is not difficult. The most important thing is no exposure to abrasive materials or aggressive household chemicals. Gentle cleaning soft cloth or a sponge with the addition of ordinary soap will be quite enough. Acrylic itself is hygienic because it is not a medium for the development of potentially dangerous microorganisms. With such a coating, you can forget about treating with disinfectants - the bath will be clean and safe.
Coating a cast-iron bathtub with acrylic is a task that can easily be planned for the weekend and within 2 days you can use the updated product. This is possible due to the quick drying of the material and the simple application process.
When choosing a coating for a cast-iron bathtub, craftsmen who know modern repair techniques still recommend choosing restoration with liquid acrylic. Thanks to it, the cast iron bathtub will last at least another 10 years, while remaining just as white and shiny. Enameling is a method that has become obsolete and does not respond modern requirements safety, durability and quality.
Restoration of a cast iron bathtub reviews
Liquid acrylic – modern material, with which you can carry out high-quality restoration of the bathtub with your own hands. It consists of a base having a fairly high density and a hardener. Can be used for the restoration of steel, cast iron and acrylic bathtubs.
Materials and tools
To restore the bathtub, you will need bulk liquid acrylic, cleaning and degreasing products for plumbing fixtures, and soda. Please note that liquid acrylic is sold in containers designed for bathtub sizes - 1.2, 1.5 or 1.7 m.
You need to prepare a tool for work:
- grinder;
- drill;
- whisk attachment;
- pliers;
- sandpaper of various grain sizes;
- rubber spatula;
- respirator;
- vacuum cleaner;
- sponge;
- gloves;
- flashlight.
When using a drill to sand the surface of the bathtub, you will need a special attachment.
Note: construction hair dryer and a stationery knife will be useful for removing non-factory enamel if the bathtub has already been restored.
You also need polyethylene to protect the floor and walls (you can use rags or newspapers).
Preparing the bath
The quality of preparation will depend appearance and service life of the applied coating. First, the overflow and drain are removed. Using a grinder or a drill with a grinding attachment, you need to carefully treat the surface of the bathtub. For this purpose, sandpaper for rough work 40-N or 32-N is used (according to GOST 3647-80). Emery will help remove the formed water raids. The surface after sanding should be rough to ensure good adhesion of liquid acrylic.
Note: non-factory enamel previously applied to restore the bathtub is removed stationery knife after heating with a hairdryer.
The bathtub needs to be cleaned and any remaining debris removed. Then the surface is treated with a plumbing cleaner - the poured product must be spread with a sponge over the entire surface of the bathtub, including the installation location of the removed overflow.
The bath is washed again and left to dry. After drying, proceed to the next important stage works - degreasing. Soda is poured into the bath and thoroughly rubbed over the entire surface with coarse sandpaper.
Perhaps degreasing will need to be done not once, but two or three times. You must work with gloves. Then the bath is thoroughly washed with a stream of water from the shower.
Before the beginning next stage you need to remove the siphon.
The installation site of the siphon must be cleaned, degreased and rinsed from soda residues.
The mixer and shower are covered with a bag and secured with tape - water should not get on the applied layer of liquid acrylic until it dries completely. The tiles and shelves above the bathtub are cleaned of dust particles with a cloth. Do not allow sanding dust to get on the acrylic.
After completing this stage, the bath should be thoroughly dried with a hairdryer. Special attention pay attention to places where water can collect: the joints of the tiles and the bathtub, under the side, which is installed at the junction of the tiles and the bathtub. It is better to remove the rim and carry out the restoration of the bathtub without it. The cement joints at the junction with the bathroom can be dried well with a hairdryer.
To eliminate defects in factory enamel (cracks, chips), use quick-drying automotive putty.
The composition is stirred and rubber spatula Apply to damaged areas and then allow to dry.
While the putty dries, cover the floor under the bathtub and the tiles at the joints with polyethylene or newspapers, which are secured with tape.
So, when pouring liquid acrylic, it will not spoil the flooring and wall tiles.
After the putty has dried, these places are covered with fine sandpaper. Use a vacuum cleaner to remove dust particles from the bathtub.
Use a degreasing agent (acetone) to wipe the areas where cracks and chips have been putty. You should also wipe the installation areas of the overflow and siphon with acetone. Place a container under the drain hole (you can use a cut plastic bottle). Excess liquid acrylic will drain into this container.
Coating
After finishing preparatory work start preparing liquid acrylic. The hardener is added to the material in parts and thoroughly mixed using a drill with a whisk attachment.
It is necessary to achieve complete mixing of the two components, not forgetting about the material in the corners and at the bottom of the jar with liquid acrylic. Otherwise, the layer of applied acrylic will dry unevenly. You need to stir the mixture for 10 minutes.
Important! Don't forget about the pot life ready mixture which is indicated on the packaging. During this time, you need to completely complete the work.
Before pouring the composition is allowed to stand for 5-10 minutes. To work you will need plastic container, into which acrylic is poured. You can use a trimmed and well-wiped hardener bottle. The work is performed wearing medical gloves.
Note: adding coloring paste will allow you to obtain the desired color of the composition. Color paste by weight should not exceed 3% of the total mass of the composition.
The composition is poured around the perimeter of the bath from top to bottom.
Going lower, help yourself with a rubber spatula, which is used to rub the acrylic into the surface of the bathtub. Having achieved complete coverage with liquid acrylic, use a spatula to make zigzag movements along the bottom of the bath. Then the composition is leveled with even movements from the wall towards the drain.
The bath is left for 5 minutes. Turn off the light and use a flashlight to check the surface of the bath for defects or irregularities (smudges) that need to be leveled with a spatula.
Important! Air bubbles may have formed when mixing the composition. To remove these bubbles, the surface of the bath is quickly blown with a hairdryer at low speeds.
After 10 minutes, use a flashlight to check the surface again. The bathtub can be used 24-48 hours after complete drying. Until this point, the bathroom must be closed. The drying time of the composition depends on technical characteristics material and temperature regime in room.
Note: Some modern liquid acrylics take 12-16 hours to dry.
The result of the work
As a result of the work done, you will receive a completely restored bathtub with a beautiful appearance, which is guaranteed to last at least 10 years. The bathtub must be washed after each use by special means for caring for acrylic, dishwashing detergents or liquid soap.
Advantages and disadvantages
Advantages of bathtub restoration with liquid acrylic:- long service life;
- beautiful appearance;
- smooth surface;
- beautiful performance characteristics, primarily mechanical strength;
- possibility of repeated restoration in the future.
The disadvantages of this technology include:
- the long time required for the surface to dry completely;
- a specific smell when applying and drying liquid acrylic;
- the need to purchase bath care products.
Tricks at work
A high-quality bathtub surface will be obtained by applying the composition in an even, thick layer. Acrylic should flow down on its own. Determine by eye the middle of the side slopes and pour a second portion of the composition onto them. The remaining material is poured to the bottom. This way the entire surface of the bath will be covered with a thick layer of acrylic.- the most popular service for economical and practical updating of old enamel. If the bathtub in your apartment has darkened, rust, stains, or smudges have appeared on it, do not rush to replace it. The situation can be corrected in a simpler and more economical way. Give to your bath new life allows modern technology restoration" Filling bath
ANYTHING YOU NEED:
" using Liquid Acrylic enamel. This technology has already proven itself to be the most advanced and economical.
Restoring a bathtub with acrylic
It would seem like a simple matter to cover it with a layer of new enamel, but you can’t do it without a specialist. Experts warn that you should not try to restore the bathtub yourself; it is not as easy to do as it might seem at first glance. In order for the surface of the bathtub to properly fix liquid acrylic, it must be prepared. At the first stage of work, the master cleans the bathtub using a drill and sandpaper.
Then the surface of the bath is washed, dried and degreased, and any defects are puttied. The bathtub is cleaned of old enamel and rust, and only after that can the renovation begin.
Having prepared the acrylic working composition, the specialist applies it to the surface of the bathtub. Acrylic is applied using the pouring method; for this you do not need to use a roller or, especially, a brush. Starting from the upper sides, the master evenly pours liquid acrylic. Following all the curves of the bathtub and filling all the cracks, the acrylic coating forms an even glossy layer. The thickness of the acrylic layer reaches from 2 to 6 mm, which ensures the strength, durability and heat resistance of the coating without leaving streaks, smudges or other defects.
Remember that an unprepared, specially trained person will not be able to apply liquid acrylic correctly. Use the services of professionals to get the desired result. The work of a bathtub restoration specialist will take only 2-3 hours and after 36 hours you can use your new bathtub. The adhesion of acrylic to the bathtub is so great that it can increase its service life to 15 or even 20 years. Self-leveling acrylic will not crack or peel off; this coating is exclusively smooth surface
, for this reason, dirt and rust do not clog into it. The restored bathtub can be easily washed with ordinary gel products. After the acrylic pouring procedure, your bathtub will acquire a beautiful shiny gloss. The surface will be smooth, resistant to bacteria, mechanical and chemical influences. Self-leveling acrylic is environmentally friendly, which has thermal insulation and noise insulation properties.
Restoring a bathtub with enamel
Resurfacing a bathtub using enamel is a method that has been in demand for many years due to the lack of good alternatives, and may now still be feasible in some cases.
When factory enamel loses its appearance, acquires a gray tint from ingrained dirt, becomes covered with reddish rust stains and a network of cracks of varying depths, you can try to revive it with a new layer of enamel. Of course, you shouldn’t expect this layer to be as durable as one that has already served for several decades. Restoring a bathtub with enamel is a cosmetic coating that will return the bathtub’s beauty, shine and whiteness, but, unfortunately, for a short period of time.
Bathtub restoration enamel is essentially epoxy paint that is mixed with a hardener immediately before work begins. The mixture, prepared according to the manufacturer's instructions, is applied to the surface previously prepared for coating. To ensure good adhesion, old enamel is removed using sandpaper and powder. All cracks, chips and potholes are cleaned to a metallic shine, all material detachments are removed. Particularly deep surface defects are filled with a primer.
Before applying the enamel, the bath is warmed up by filling hot water, and degreased with White Spirit solvent. The surface is coated using a brush or roller, thin layers. Depending on the type of enamel used and the visual effect that appears during the work, the master can apply from 2 to 4 layers.
An enamel-coated bathtub will be ready for use in no earlier than 5 days. This is exactly how much the material will need for good adhesion to the surface and complete drying. So that the resulting effect of whiteness and glossy shine remains at its maximum long term, you need to use the bathroom very carefully. To do this, you should avoid impacts, exposure to metal objects, dropping heavy objects on the surface, cleaning with aggressive agents and hard brushes.
Even with the most gentle use, you should not count on very long use of a bathtub restored with enamel. It will retain its presentable appearance for no more than 1 year. Therefore, it makes sense to immediately pay attention to restoration methods that will provide a more durable and high-quality coating.
Restoration of bathtubs price
There is another argument in favor of restoring the bathtub poured acrylic- the price is very favorable for the consumer. Judge for yourself, the cost of restoring a bathtub is almost 3 times cheaper than buying a new one, and there is less hassle during repairs. No need to dismantle old bath, take it out at the risk of damaging the tiles or wall tiles.
Restoring a bathtub with liquid acrylic is smart choice for those who are used to saving time and money!