Russian manufacturers of gas heating boilers. Domestic gas heating boilers - prices and features

In Russia, many houses are heated with gas. And no wonder. The deciding factor for most is the low price of fuel. By the same logic, they usually buy a boiler. Foreign manufacturers, no doubt, can shine with both service and quality. But the prices for their products are much higher than for domestic ones. Gas boilers Russian production have a power of 7 - 68 kW and can be used in private homes, in agriculture and in industry.
First, let's figure out what kind of gas boilers there are.

Single and double circuit
A single-circuit boiler is intended for heating only. Double-circuit boilers will also provide owners with hot water. It is advisable to install such a boiler where the flow of heated water is small (if the flow is large, it is better to think about installing single-circuit boiler with a boiler). The heat exchanger in double-circuit boilers can be bithermal or separate.
The first simultaneously heats water for heating and water supply. The second option is different heat exchangers, which extends the service life of the boiler. But, if it fails due to scale, the system will be left without heating! If we talk about cost, the bithermal option is cheaper.
A single-circuit boiler can be made with a boiler. It will provide the house with hot water, and the installation price is comparable to a double-circuit boiler.

Wall and floor
Wall-mounted gas heating boilers are mainly double-circuit and have a power of up to 20 kW.
Such a device is enough to heat a room of up to 200 m2, and they are much more attractive in appearance.
Traditionally, however, it is believed that wall-mounted units are better purchased for smaller homes, although many floor-mounted units have less power.
A wall-mounted boiler is 2–2.5 times cheaper than a Russian-made floor-standing gas boiler. But according to statistics, ¾ of the boilers purchased in Russia are floor-standing.

Conventional boiler and condensing boiler
The condensing boiler has an additional heat exchanger in which waste gases are collected. Their heat can be said to be “secondarily” used by the device. Result: saving up to 30% gas. But harmful emissions are reduced by 70%. The efficiency is much higher.

Popular Russian manufacturers
Several large enterprises produce gas boilers in Russia. Let's look at some of them.

ZhMZ
Zhukovsky Machine-Building Plant was founded in 1939 as an enterprise in the aerospace industry. Later, the production of AGV series boilers was launched, which were well received by the consumer. Today it is one of the most famous manufacturers of boiler equipment not only in Russia, but also in a number of foreign countries.
Up to 30% of ZhMZ boilers have a power of 11 kW (this figure is easy to find out - look at the first digit in the name of the boiler). All ZhMZ boilers are floor-standing only.
Example: Boiler AKGV - 11.6 - 3. Its power is 11.6 kW. Weight – 35kg. Dimensions: 850x310x412 mm. Efficiency – 86%. The price varies from 16-20 thousand rubles.

Rostovgazapparat
CJSC Rostovgazapparat is another guard, founded in 1959 in Rostov-on-Don. Approximately half of the boilers produced by Rostovgazaapparat with heat exchangers made of steel or cast iron are boilers with a power of 23 and 29 kW. Automation in the units is imported. Models produced at the plant: AOGV Rostov, Siberia, RGA.

Borinskoe

OJSC "Borinskoe" received its name from the village where the plant has been located since 1976. The company produces both gas boilers, as well as solid fuel and universal ones.Borinskoe is a manufacturer of more than 30 items and modifications gas heating equipment with heating capacity from 7 to 100 kW. Some models, for example, EuroSit, use imported automation.

Advantages and disadvantages of domestic equipment
Domestic manufacturers, when developing their products, focus not on style and fashionable technologies, but on quality and adaptation to local conditions. And therefore Russian boilers:

• Adapted to climate, temperatures, pressure differences in the main line.
• Easy to maintain.
  
• Repairable, spare parts are easier to buy.
  
• They run on bottled gas - they can be installed where there is no mains.
• Huge price difference! Russian boilers are two or even three times cheaper than similar imported ones.

1. Imported boilers are more advanced in terms of automation, electronics, they can regulate temperature up to half a degree, etc. But sometimes, in our conditions, they quickly break down or cannot use all functions at full capacity.
2. Domestic boilers are bulky, more like an industrial unit than an appliance for the home. The imported model will fit into modern design. But sometimes beauty is not needed in such technology. Especially if there is a separate boiler room. In addition, the latest models of many domestic factories have noticeably decreased in size and, apparently, they are also working on the design.
3. Russian boilers generally operate less efficiently and have lower environmental friendliness. But this does not apply to all devices. But ZhMZ, Rostovgazoapparat and Borinskoye are working on improvements in this area.

Which model should you choose?
Which boiler model is right for your particular case will depend on many factors.
Try to weigh them and take them into account. Having decided whether the boiler will be floor-standing or wall-mounted; single-circuit or double-circuit, you need to calculate the power.
An approximate calculation can be made for a house with well-insulated walls and ceilings of about 3 m. For 10 m2, 1 kW of power will be required.
Pay attention to what gas pressure in the network the device is designed for. If, for example, it is 20 mbar, and the actual pressure in the line is 10 mbar or less, then the unit will not operate at full capacity, and there is no point in overpaying for this power.
Is the unit dependent on electricity? Many imported models are equipped with pumps, fans, programming... all this is good if you never have power outages. If breakdowns and planned outages occur, it is better to purchase a simpler but reliable device. Most Russian boilers do not depend on electricity.
Read the reviews. On our website you can find the opinions of the owners of a particular model.

So. Russian-made gas heating boilers cannot please you with their beauty and fine settings. But reliability and endurance in the most difficult working conditions are the trump card of domestic technology. And most importantly, the price is noticeably lower.

Buying Russian gas boiler For wall mounting is becoming a common occurrence among buyers seeking to spend a minimum of money but get optimal technical characteristics. Russian gas heating boilers have many advantages.

Why Russian gas boilers?

Citizens buy domestic double-circuit gas heating boilers for several reasons:

• relatively low price,
• small dimensions,
• simple installation,
• adaptation to specific operating conditions.

Therefore, Russian wall-mounted gas heating boilers are readily purchased, especially if it is possible to provide gas communications to the housing construction. Since the gas supply in Russian gas pipelines and electrical supply are not stable, a gas boiler domestic production will optimal solution to provide heat, and it will not fail in the event of various pressure or voltage deviations in the network.

These are the features of adaptation gas equipment Russian companies for local operational features. Foreign gas boilers operating in Russian conditions of unstable pressure and power fluctuations do not always cope, and the user has to order expensive renovation work or buy branded spare parts, which also cost a lot.

Which companies produce domestic wall-mounted gas boilers?

If you start choosing Russian ones, you immediately come across such famous names as:

• "Gaslux"
• Zhukovsky gas equipment plant,
• "Signal",
• Hydropress,
• NEVA Lux.

Some domestic wall-mounted gas heating boilers, such as NEVA Lux, confidently compete with foreign analogues and are distinguished by their safety of use and reliability. This equipment is capable of heating about 300 square meters does not require space special care during operation.

Consumers do not encounter any difficulties when using such gas equipment, and if there is a need to purchase Russian-made components, the parts can be easily found on the relevant websites on the Internet.

Advantages and disadvantages of Russian gas boilers

Russian wall-mounted gas heating boilers are different; they use two types of combustion chambers, so there are options to choose between a closed and open model. There is also a choice between single-circuit and domestic production.

Depending on the volume of the heated area and operating conditions, a certain power of the gas heating boiler must be selected. Because wall-mounted boilers have compact dimensions, they are located even in small rooms, and they cause virtually no interference to users.

Popular Russian-made gas heating boilers have automatic ignition, biothermal heat exchangers and low cost. The latest models of Russian gas boilers from leading companies are equipped almost the same as well-known foreign analogues of heating equipment.

At correct installation and setting up with gas wall-mounted boiler Russian production is stable and high level security. Except positive aspects, the main ones being low cost and easy operation, there are also some disadvantages in Russian-made boilers:

• High noise level
• Lack of display or poor performance.

If the buyer chooses gas heating boilers Russia with the GAZLUX marking, he receives reliable equipment that can operate normally under temperature changes. Standard models provide heating for areas larger than 200 sq.m.

Providing hot water goes at a speed of 14 liters per minute, which is a decent figure. In addition, there are modernized models from this manufacturer with LED displays and improved performance.

So Russian boilers heating systems feel confident in the heating equipment market; you just need to choose the right units and use them correctly. It is recommended to entrust all installation and adjustment work to professionals, because you will be working with gas and you need to follow safety precautions. After connection, at the end of the work, it is necessary to check the heating system together with the gas boiler.

From the name of the device it is clear that the principle of its operation is electromagnetic induction. One of the simplest induction heat sources is a coil wound on dielectric pipe, inside...

Range of boilers

Today there is a lot of Russian production on the market. Being patriots of our homeland, we would like to say only good things about this category of products. But, unfortunately, reviews from specialists and ordinary consumers are not in favor of the latter. Domestic manufacturers offer a huge range of models, but the quality of these products is still inferior to their foreign counterparts. True, in Lately according to some technical indicators domestic gas boilers have improved very well.

How were the places allocated? modern market heating equipment? In first place are boilers from Germany and Sweden. On the second - Italian, Spanish, Czech and French units. And on the third - products from Russia, Ukraine and Belarus. Alas, so far domestic manufacturers cannot compete with European ones. The only good thing is the price, which is significantly lower. This is probably why the sales leaders on the domestic market are Russian boilers. This is such a paradox.

Let's look at just a few manufacturers from Russia and find out what models of gas heating boilers they offer to a wide range of consumers today. But first, let us note that for the money you invest in purchasing a domestic boiler, it will serve you faithfully. Of course, customer service is not yet up to par, but there is hope that everything will change in the near future.

Company "Rostovgazoapparat"

This is one of the most large manufacturers domestic gas boilers. In its assortment you will always find what you need. There are not so many wall and floor models in single-circuit and double-circuit versions, but also a large number of options with the latest automation systems.

I would especially like to mention the Siberia model. Let's take a look at this option and look at its design and advantages. Let's take, for example, the floor option.

How does it differ from others in terms of operating features?

• Firstly, this non-volatile unit, which is a very big plus.
• Secondly, boilers of this model operate quietly with variable gas pressure in the pipeline. And this is quite relevant today, because domestic gas suppliers are not responsible for uniform fuel pressure in pipelines.
• Thirdly, the boiler design uses basalt fiber as insulation, which is still used to protect the hull of spaceships.
• Fourthly, this is a surface coating where powder coating technology is used. And this is excellent protection against exposure external factors plus presentable appearance.

Modern devices

Today, manufacturers offer two product options - single- and double-circuit devices with different power ratings. But there is one caveat. If in double-circuit Siberia boilers both a steel and cast iron heat exchanger can be used, then in single-circuit boilers the manufacturer installs only a cast iron analogue.

The wall-mounted version of this type of gas boilers has the same indicators. But these models can be installed in wet areas, that is, in bathrooms and shower rooms. It is the increased protection against moisture that is the distinctive feature of this model. According to the general opinion of experts, gas heating boilers"Siberia" is an excellent unit that is reliable and easy to operate.

Conord plant

This manufacturer produces gas heating boilers in Rostov. Production for more than 30 years. Over the course of its entire activity, the company has gained vast experience, where in production it has always used latest developments and technological innovations. And today it offers consumers more than 12 models that are of high quality.

Solid fuel boiler

What can the Conord plant please its potential consumers with?

• Today it produces steel samples and products with a cast iron heat exchanger. The former have a power from 8 to 32 kilowatts, and the latter - from 16 to 34 kW.
• All models of the company are positioned only as non-volatile. That is, they are equipped with piezo ignition and a constantly burning igniter.
• Chimney only with natural traction. For some reason, the manufacturer believes that this option for removing combustion products natural gas is the best.
• Today, gas boilers from Conord are among the cheapest. True, they work out their cost 100%.
• Coefficient useful action products from this plant are at least 90%.

Attention! There are some guarantees provided by the manufacturer. This type of boiler, according to the company, can operate efficiently if the pressure in the gas pipeline is reduced by half. Typically, only units with an inflatable chimney work this way.

Now about some models. Conord Comfort are heating devices equipped with special thermo-hydraulic automation. With its help, you can very accurately set the boiler operating mode. The temperature error is up to three degrees, and this is an excellent indicator. Let us add that when igniting you will never hear a pop. In addition, there is an excellent opportunity to reduce the amount of harmful emissions due to new design combustion chambers. And the installed temperature automation allows you to modulate the operation of the burner, which significantly affects the efficiency of the unit in a dual-circuit version.

The principle of operation of a double-circuit boiler

Conord Lux ​​is equipped with Italian automatic equipment, which allows you to practically not go near the boiler and not worry about the temperature conditions inside the rooms of your house. The mode is set by turning the knob on the control panel. It's simple, so even a child can figure it out. The installed gas pressure regulator is a kind of protection for the automation system and the gas boiler itself. Convenience and regulation of coolant temperature without using electrical energy makes it possible to control the heating process as accurately as possible.

Domestic heating universal gas boilers "Don" are a collection of all the experience of domestic manufacturers of heating equipment. By the way, such units can be classified as combined, because they can operate from both main gas and solid fuels. The design allows this to be done. What is unique about it is the water jacket. It is distributed throughout the entire volume of the device, which allows for maximum selection thermal energy by increasing the contact area. The manufacturer made sure that the water jacket was well insulated. In this case, the insulation layer is 8 millimeters.

Boiler room in the house

The strength of such devices is ensured by the 3 mm thick steel sheets from which they are made. By the way, steel is used for both the boiler body and the combustion chamber. Let's add here the fact that the Don boilers- these are the only units that have a replaceable copper coil. It works with the feeding system hot water for household needs at home. It's no secret that in Russian regions tap water very tough, so no one is safe from coil clogging. A replaceable part allows you to extend the life of the boiler several times.

And lastly, the large combustion chamber allows Don boilers to operate on solid fuel for 8 hours without refueling. This is excellent boiler equipment with which you can heat houses up to 500 square meters.

Zhukovsky Machine-Building Plant (ZhMZ)

These boilers were developed by engineers and designers from the scientific city of Zhukovsky. How do they differ from other Russian heating units?

• Firstly, Russian developments that have been introduced into these heating installations.
• Secondly, at a reduced price, because everything is produced at the Zhukovsky plant.
• Thirdly, an approach to production that takes into account Russian operating conditions.

ZhMZ logo

What does ZHMZ offer today? These are three main classes of boilers, each of which has its own distinctive features. First class - economy. From the name you can already understand that this is the cheapest option. The automation developed by the plant’s specialists is used here; by the way, it is very reliable. All models in this line are non-volatile.

The second class is a station wagon. This design uses SIT automation. This is a more expensive analogue with improved operating qualities and performance of the device.

Third class - comfort. Mertik Maxitrol automatic equipment is installed here, which allows you to adjust temperature regime coolant depending on temperature environment. As experts say, I turned it on and forgot that the boiler existed.

There is one interesting fact- boilers from the Zhukovsky Machine-Building Plant have both rectangular and round shapes.

Borino heating boilers

These gas boilers are among the most popular today. Residents of holiday villages give them particular preference. This heating equipment is famous for its high quality performance and a large number of various functions. And there are quite a few models in the line-up.

Boilers Borinsky

A leader in its field, the Borinsky plant offers several basic models that are used by a large number of consumers. Apply here Newest technologies and materials, and high-tech equipment was installed. Most likely, this is the key to the success of the plant. Experts note that this is one of those manufacturers whose products, in many respects, are not tired of European ones, which is good news.

There are several well-known models. For example, the Ishma model, which is distinguished by its high reliability and safety. Such boilers are equipped with an advanced electronic automation system. It interacts with a check valve, which closes the gas supply if its pressure in the main pipeline increases. A signaling device is also installed here, which gives a sound and light signal if the percentage of unburned gas in the combustion chamber exceeds acceptable standards. In general, the boiler is simply stuffed with all kinds of foreign-made electronics, which guarantee its safe operation.

KOV boilers are modern products, which correspond to all indicators European quality. They are usually used in large country houses, hotels and small production premises. Powerful, reliable, with high technical characteristics - this is how KOV boilers can be characterized. The only thing you need to pay attention to is the weight of heating units of this brand. The maximum is up to 170 kilograms, so it is necessary to pour a concrete base under it.

AKGV boilers are the most common version of Borino gas boilers. It is the devices of this series that can most often be seen in small dachas and country houses. Due to its service life, this boiler has been highly appreciated by consumers. In addition, manufacturers have improved the design by adding new system automation. This increased the reliability and safety of the unit.

Conclusion on the topic

As you can see, they are quite widely represented on the market today. The choice is considerable, and you will have to carefully approach technical specifications each model. Not only our article will help you here, but also some photographs posted on this page. After all, the appearance of boiler equipment plays an important role, especially in the case wall version. So figure it out and choose.

• Versatility. The power of Russian gas boilers varies on average from 11 to 68 kW, so they are used to organize heating in both private residential and industrial and administrative premises.
• Adaptation to local conditions. Such equipment is manufactured taking into account the characteristics of gas transmission lines of the Russian Federation. It can operate at reduced gas pressure (using antifreeze liquid).
• Affordable price. The prices of Russian-made gas boilers are significantly lower than their foreign counterparts.
• Compact dimensions. Domestic devices can be installed in any room.
• Large service base. Components for such equipment can be found in any city in our country.

In the online store site you can buy Russian gas boilers for organizing the system autonomous heating at an attractive price from 12,000 rubles. Our consultants will help you with your choice suitable model.

3 reasons to take advantage of our offer

1. We organize delivery of equipment throughout Russia through transport companies.
2. You can pay for the goods using any in a convenient way . We accept both cash and non-cash payments. We offer residents of Moscow and St. Petersburg to make a purchase on credit.
3. We install equipment for organizing an autonomous heating system.