Cleaning after renovation: tidying up the windows. Washing plastic windows after repair: household and folk remedies

Maintenance of plastic windows is minimal. Unlike wooden ones, they do not require periodic painting and additional protection. The only thing you need to do is wash the profile and glass, and the windows will serve faithfully for decades. But even such care has its own rules and requirements. How and with what to wash plastic windows? - let's look at this issue together.

Cleaning the window after installation

Immediately after installation, the windows do not look as we would like. When installation work is completed, a film remains on the profile, and stains remain on the glass and fittings. You will have to spend 5-10 minutes cleaning the windows after installation.

When completing all work, first remove the protective film from the profile. This must be done no later than 2-3 days after installing the profile. When exposed to sunlight, the adhesive layer can come away from the film and remain on the profile in the form of spots, onto which dust and dirt from the street will subsequently settle.

The film cannot fully protect the profile from contamination, so after its removal, stains from construction mixtures may remain on the surface of the frame and glass. Now we will tell you how to clean plastic windows after repair. We will take into account only the profiles, because the glass and fittings can be cleaned by any means, but the frame needs more gentle care.

How to clean concrete, putty and plaster from a window profile?

If you remove stains from building mixtures immediately after they hit the window, not a trace will remain of them. It is much more difficult to wash the profile and glass if the concrete, putty or plaster has already dried. This will take a little more time.

These building materials are susceptible to getting wet, and it is precisely this disadvantage that we will use to our advantage. Wet the stains thoroughly with water using a spray bottle or a rag; periodically, you can additionally moisten the contaminated areas. After a few minutes building mixtures can be washed off with a rag.

If water doesn't help, carefully remove the stains with a blade or thin stationery knife. It is not recommended to use coarser and thicker tools, for example a spatula, as you may damage the profile.

How to clean construction foam from a window profile?

It will be difficult to wash off construction foam, so make sure that installers wipe the profile every time it gets on the surface of the frame.

If you still cannot avoid this, you can completely remove the dried foam only by scraping it with a knife or blade. Residues can be removed with special means, for example, Phenozol or Penosil, or “non-traditional” foam solvents like Dimexide (medicine). But under no circumstances use chemical solvents, nitro compounds (toxic substances of organic origin, for example, nitrobenzene, nitronaphthalene) or pure acetone. Polyvinyl chloride (PVC, the material from which the profile is made) is not affected by acids and alkalis, but on the surface of the profile there may be glossy film or protective layer who will suffer from the effects of such means.

And now we will talk in detail about the means of combating construction foam stains that we mentioned earlier.

Fenozol is a company that produces care products for plastic windows. Its product line includes a special profile cleaner without any solvents. This product can remove any dirt, including stains. polyurethane foam. We will return to this company, because it produces a lot of products that will be useful to us.

PENOSIL is a European company that produces polyurethane foam and construction adhesive. In addition, it produces Premium Foam Cleaner - a cleaner for hardened polyurethane foam from tools, clothing and even skin. The product contains acetone, but due to the mass of auxiliary substances, this solvent is not dangerous for the profile surface. The product is available in the form of an aerosol.

Dimexide - medicinal product in the form of a solution or gel, used for muscle or joint pain. This medicine is produced by several manufacturers and is sold without a prescription. The product contains dimethyl sulfoxide, which softens the foam so that it can be removed with a regular rag. The product does not violate outer layer profile, but can cause allergies or skin irritation, so it is better to use it with gloves.

How to remove paint from a window profile?

Paint stains are the most difficult to remove. Usually paint and varnish materials are removed using acetone-containing products, but in our case this solution is not suitable.

First, try scraping off the droplets with a blade or utility knife. This must be done extremely carefully. If there are small stains, you can wipe them off with nail polish remover, without acetone. It is better to do this pointwise, i.e. Apply the product only to contaminated areas; it is most convenient to use cotton swabs.

Paint on water based can be removed using construction hair dryer(a device that supplies a stream of hot air under high pressure) and an ordinary high-power household hair dryer.

To do this, just direct a stream of hot air at the stains for a few minutes, the paint will become soft and can be wiped off with a regular rag. With more durable paint and varnish materials this approach will not work.

How to remove glue stains from a window profile?

If you did not remove the film in time and traces of glue remain, be prepared for labor-intensive work.

Stains can be removed using an aqueous solution of acetic acid (70%) in a ratio of 10/1. If you use less pure acetic acid (with a lower percentage of the active substance, for example 14%, 10%) you can use less water.

All contaminated areas are wiped several times with a vinegar solution, after which the glue is wiped off with the hard side of a dishwashing sponge. To completely remove the glue from protective film it will take you 20-30 minutes of continuous work.

We have figured out the removal of construction dirt, now let's find out how and what is the best way to wash plastic windows during operation.

Cleaning the window during operation

By the word “window” we mean the profile, glass, fittings and even the seal. All these parts consist of different materials and their care requirements differ from each other.

How to wash a plastic window profile?

The profile is washed as it becomes dirty. Both special products and common household chemicals can act as detergents.

Most accessible remedy to clean the profile - regular dishwashing gel. Such products do not contain hard particles that can damage the surface of the profile, they are non-toxic, do not cause allergies, foam easily, remove all dirt from the profile and are easily washed off.

It is recommended to make a soap solution in a ratio of 10/1 (10 parts water, 1 part gel). The water should not be hot. The profile is wiped with a soft sponge for washing dishes or a special household microfiber cloth (fabric material that does not leave fibers). You can properly wash plastic windows using an ordinary soft cloth, but in this case the profile will have to be polished in a circular motion.

After washing, you need to wash off all the foam from the profile and wipe dry. It is not recommended to leave the frame wet. If the sealing of the profile and glass unit is somehow damaged, water can get inside the window, which can cause condensation or fungus.

For serious contamination, it is better to use special products, such as the aforementioned Phenozol. For convenience, you can purchase a special set that includes products for washing the profile, seal and fittings. Each of these products meets all the requirements for caring for plastic windows.

Fenosol is not the only company, but one of the most affordable. Attention should also be paid to a company called KARCHER. It produces a range of products for household use, including for cleaning PVC products. You can purchase a stone/linoleum/PVC cleaner. It removes stubborn stains without harming the profile, and is even suitable for caring for wooden windows, sold in a convenient spray bottle.

Each of these professional means You can purchase it at a hardware or hardware store. Their price is approximately 500 rubles. To clean the profile with these compounds you will need a soft cloth. Any material can be used.

How to wash glass?

Window glass is not much different from ordinary glass, so you can wash it with the usual means. It is best to use cleaners based on acetic acid, ammonia or regular alcohol. The same compounds can be used to wipe the profile.

In order to wash plastic windows without streaks, microfiber cloths are used. You can also use regular paper napkins or newspaper.

More complex stains can be removed with solvents, alcohol and acetone. The main thing is to ensure that these compounds do not get on the profile and seal. If you have tinted or laminated glass (glass covered with a special film), it is better not to use caustic compounds.

How to wash fittings and seals?

You can clean the fittings using any means, because metal is not afraid of any chemicals. In addition to cleaning, do not forget to periodically lubricate the mechanisms with regular vegetable or special oil.

Dust and other contaminants must be periodically removed from the plastic window seal. Do this with a soap solution and a soft cloth. Once every few months, the seal needs to be treated with silicone grease, which you can purchase at any hardware store; it is also recommended that it be carried out periodically (every few years).

External window care

Plastic windows need to be washed both inside and outside. Caring for windows on the street side is not much different from caring for the room side. The exception is the metal parts of the window, for example, the drainage profile. It is best to wash it only with soap solutions and do not use abrasives (with hard particles), as well as various acids and alkalis. The paint that covers the outside of the window can become damaged, exposing the metal, which increases the chance of corrosion (rust).

Installing plastic windows is only half the battle. So that they retain their original appearance and serve you long years, they need proper care. Many people have a question about how to wash plastic windows at home.

Detergents

If we talk about means for caring for plastic windows, there are more and more of them every year. The industry produces new and more advanced products.

For cleaning you may need:

"Mr. Muscle" - a product intended for cleaning glass, will allow you to get transparent window no divorces;
“Formula 409” is suitable for cleaning stains;
"Sanita" will help to delicately cleanse dirt;
“Frosh” will get rid of traces of installation work;
“White Cat” is a rag designed for washing glass and plastic surfaces;
"Domestos" is a gel that helps restore the whiteness of the plastic frame;
“Mr. Proper” - will do an excellent job of removing fingerprints, grease, and soot;
Pemolux is recommended for cleaning old dirt and stains;
Comet gel is used for washing kitchen windows– it cleanses greasy dirt well;
washing powder, laundry soap or dish soap can be used to clean fresh stains and small areas.

Household chemicals are good at cleaning glass from dirt and dust.

In addition to using household chemicals, you can resort to folk remedies, which are no less effective. Let's look at what you can use to clean plastic windows at home:

Soap solution. Take any powder or laundry soap and dissolve it in water. The resulting composition is used to clean windows.
Dentifrice. It is mixed with chalk to a homogeneous consistency of sour cream, applied to the dirt and allowed to dry, after which it is washed with a dry cloth.
Vinegar solution or citric acid in combination with soda gives an excellent effect. Soda is applied to the surface, and rubbed intensively with a sponge and acid.

Washing technique

To plastic for a long time service remained aesthetically attractive, you need to know how to wash plastic windows at home and follow some rules for caring for them. The main point is right choice inventory. Do not use abrasive products that may scratch the plastic surface or scratch the glass. It is worth using soft rags, sponges, paper towels and napkins.

To wash glass units, use soft cloths and sponges.

Also, remember some rules:

wash the windows on a cloudy day so that the glass does not dry out so quickly and you have time to wipe the surface before rainbow stains appear on it;
First of all, clean the frame, then only the glass unit;
apply the detergent evenly and in one direction, circular movements create streaks;
For glass, it is better to take special alcohol solutions of detergents.

For good quality When cleaning, you should follow the correct sequence of actions. If the window was recently installed, you need to peel off all the film that protected the frame during transportation.

It is necessary to peel off all the film that was used when transporting the glass unit.

Wash the plastic from dust and dirt with a regular soap solution. If there are individual areas of severe contamination, they are treated with special means. Shallow scratches can be removed by applying polish. However, not all products can be used for cleaning plastic windows.

Important! Remember that you cannot use:

abrasive powder products will leave scratches on the surface, creating an untidy appearance plastic construction;
acid and solvent can change the color of the panel, so they should be used with caution.

Proper care of plastic frames and double-glazed windows

Durability of use is due to proper care. This is especially true in winter period year, so you need to know how to care for plastic windows in winter.

A hex wrench is used to adjust plastic windows.

In order to prepare a window for winter, you will need tools and equipment. These include:

rags and napkins;
soft brush;
hexagon;
seal lubricant;
machine oil.

Sequence of work

First of all, it is necessary to wash the windows from dirt and dust accumulated during the spring-summer period. In this case, soft rags and napkins, as well as non-abrasive detergents, are used. Heavy soiling cannot be removed using a knife or powdered cleaning agents. Before you start cleaning the windows, you should brush off the dust.

Dirt accumulated over the summer can make it difficult to open and close the window.

After this, you need to start adjusting the fittings. This can be done using a hexagon. To prevent cold from entering the room in winter, you need to move the clamps on the sashes to winter mode. So the fit window frame will be stronger.

Switching the window to winter mode ensures a tighter fit of the frame

It is important to lubricate the fittings with oil. After applying it to the parts, you need to open and close the sash several times, this will help the oil to distribute. This procedure should be repeated throughout the winter, the main thing is not to do this in severe frosts.

Window mechanisms need to be lubricated several times a season.

The seal also requires attention. Rubber products wear out over time and no longer fit tightly, which affects the tightness of the window. You can wash the gum directly on the window or by removing it. The procedure must be carried out using detergent, and then be sure to wipe dry. The process is completed by applying silicone rubber sealant.

Silicone grease prevents rapid wear of the rubber seal

If you see that a window is fogging up in winter or condensation is collecting, then you need to contact a specialist. They will check the condition of the rubber seal and replace it if it is worn out. It is important to replace parts on time, this will help extend the life of the window.

Double-glazed window maintenance

Given that correct installation A plastic window will last approximately 40 years. When installing, make sure that the windows are covered with a special protective film, which will protect them from scratches during transportation and installation. Such windows do not need to be painted or sealed for the winter, but they still need to be washed at least twice a year. You shouldn't do this when low temperatures, since the glass may burst if it comes into contact with water.

Glass can be washed with soapy water. Do not use abrasive powders or brushes that scratch the glass surface.

Window sill care

The window sill deserves special attention. This is especially true for those who like to decorate their apartment with indoor plants. Water from watering flowers, falling on the windowsill, forms yellow circles over time. These stains are very difficult to remove, and sometimes simply impossible, so it is worth using a special self-adhesive film on the windowsill, which can be white or other colors, as well as pallets for indoor plants.

The window sill is protected from moisture using a special film

Window sill texture different manufacturers may vary. They can be smooth, porous or rough. When selling, the consultant usually talks about what kind of material was used for the window sill and how to wash off the dirt. However, some features should be taken into account, for example, a rough window sill can be cleaned using a stiff brush, but in no case should you use a scraper or knife.

Slope care

Slopes also need maintenance, but the means for this directly depend on the materials from which they are made. If they are made of plastic, then special care will not be required. They are easy to wash and clean from dust and dirt. A special feature is the need to replace the sealant, which several years after installation is completely removed and replaced with a new one.

After several years of use, the sealant must be replaced

If the slope is made of plasterboard, then it is covered with paint, which can be washed and, if necessary, updated. When using cork or bamboo, it is enough to systematically wipe them with a damp cloth to remove dust.

Plastered slopes should not be washed, since they are not resistant to moisture; they can be wiped with a damp or dry cloth. At joints it is necessary to use acrylic sealant, and paint the surface in a timely manner.

Yellowed window plastic can be washed off with soapy water, ammonia, bleach or hydrogen peroxide. There are special kits on sale for caring for plastic windows, they include a napkin, detergent for PVC, lubricant for fittings and composition for protecting seals. Acetone, concentrated acids and alkalis can ruin the profile, so their use is not recommended, the same applies to all kinds of cleaning powders. We will tell you how and how to clean plastic windows from yellowness in our article.

The completed renovation is always a holiday; the eye rejoices, contemplating the whiteness of the new plastic windows. However, what is it? Six months later, the frame turned yellow and became stained. There are several reasons for this:

Low quality window profile. In the production process of PVC, complex technologies are used; the plastic contains more than ten components responsible for the strength and color of the material.
Titanium dioxide gives PVC a snow-white color, the stability of which depends on the quality of the powder; many manufacturers, wanting to save money, purchase low-quality raw materials and after 2-3 years the profile begins to turn yellow.
PVC also contains special light stabilizers (obtained from benzophenone or benzotriazole), they protect the profile from solar radiation and the action of free radicals. Thanks to these substances, the rate of light aging of the material slows down several times, the frames do not turn yellow or fade.
Weather. Due to sudden changes in temperature, the physical properties material, the polymer may change color or even crack. This only applies to cheap profiles manufactured by fly-by-night companies.
Choose plastic windows famous manufacturers, which have been on the market for a long time and offer a guarantee for their product. For example: Veka, KBE,Proplex,MONTBLANC, Salamander,Rehau, Kaleva,Deceuninck, JUICE etc.
It is unwise to save on such things, because a high-quality plastic window will serve you for 30-50 years and will look snow-white for many years.
The yellowness of bad plastic cannot be washed off - these are changes molecular structure materials that cannot be bleached, you can only get used to the new shade of the windows and hope that the profile will not become stained over time.

Kitchen frames often turn yellow from exposure to soot and greasy fumes during cooking. If people smoke in the room, not only the windows and curtains turn yellow, but everything around them turns yellow. These two types of stains are not dangerous and can be easily washed with soap and water.
Improper care- a fairly common reason for the yellowness of the profile; in the pursuit of cleanliness, housewives sometimes use: acids, strong alkalis, all kinds of cleaning powders and solvents. All these products gradually destroy the material, which leads to scratches, loss of gloss and yellowing of the surface.

If you have recently completed a renovation, then you may be interested in how and how.

What you can and cannot wash plastic windows with

Let's first figure out what you can't wash plastic windows with in order to avoid annoying mistakes.

Abrasives: metal grid or brush, cleaning powders. All this leaves micro-scratches on the plastic profile, into which dust and dirt become clogged over time, causing dirty spots to appear that are very difficult to clean. Do not use abrasives, even if you think the window is too dirty, it is better to apply soap composition and let it sit for half an hour, after which the dirty coating will be easily washed off.
Under no circumstances should you use acetone to clean a plastic profile; solvents No. 647 and No. 648 will corrode the plastic.
Polyvinyl chloride is resistant to acids and alkalis, but the protective glossy layer on the surface of the profile can be destroyed under the influence of these substances, and the window will lose its attractive appearance.
? No no and one more time no! It copes well with any type of dirt, but leaves micro-scratches on the surface, which will later fill with dirt and ruin the appearance of the window.

Don't wash windows hot water, this causes the plastic to become cloudy or yellow; everything can be washed well with cool water and detergent.

How to remove yellowness from plastic windows?

Soap solution

These products help remove yellow discoloration, and the manufacturers themselves recommend using them absolutely harmlessly: laundry soap, dishwashing liquid or washing powder. For work you will need a soft cloth, sponge or microfiber cloth.

Dissolve soap shavings, dishwashing gel or powder in water, apply to the profile and rub a little, rinse. If any dirt remains, lather the plastic again and leave for 15-30 minutes.

Rinse off the remaining product with a damp cloth and wipe the profile so that any remaining moisture does not seep between the glass panes. This way you can wash off fumes, soot, greasy deposits, yellowness from nicotine and most other household contaminants.

Advice: before using any home remedy check it on an inconspicuous area of the profile; you should be alerted by a change in the color or texture of the plastic, loss of shine. If such changes appear, then this remedy should not be used.

Alcohol, ammonia, bleach, hydrogen peroxide

Dampen a cloth in one of the suggested products and gently wipe the surface of the frame and window sill. Don't forget to wipe the plastic with a damp cloth after a few minutes. You can also wipe glass with ammonia; in addition, it washes away yellowness and gives the surface a beautiful, even shine, and also helps.

Windowsill

A mixture of perhydrol and powder bleach will help whiten a yellowed window sill. You should not heat perhydrol; use cold water. Dissolve a tablespoon of both in half a liter of water. Apply the resulting mixture to the windowsill, rub thoroughly and rinse. If not everything has been washed, repeat again.

Restoration gel « Retrobright"

A video recipe for this gel was found on one of the forums where org repair specialists gather. technicians, thrift store owners and restorers. " Retrobright» used for bleaching consoles, computer cases and set-top boxes, keyboards and other plastic parts that have turned yellow from time to time.

This product is very strong and can hardly be used on new PVC windows. But it will be just a salvation if you have settled in rented apartment and the previous tenants left you old refrigerator, yellowed windows and grease-stained kitchen furniture, everything is not particularly dear to the heart, but very dirty.

To prepare the pasta we will need:

Vanish OXI Action
Hydrogen peroxide 32% – 100 g.
Water – 200 gr.
Potato or corn starch - 4 teaspoons
An unnecessary vessel, a glass jar, a couple of glasses and a plastic spoon (the metal reacts with the product, and we don’t need that), cling film, tape.

Hydrogen peroxide 32% cannot be found in a regular pharmacy, but you can buy it in a specialized store that sells chemical reagents for laboratories or order it on the Internet.

Be careful when working with reagents, wear rubber gloves, because such peroxide can leave a chemical burn on the skin.

Quarter teaspoon Vanish OXI Action dissolve in 25 ml. warm water. We dilute 4 teaspoons of starch (with a slide) in 100 g. cold water, stir well. Pour the resulting mixture into a ladle with preheated water (75 g). Heat the mixture, stirring constantly, after a while the starch will thicken. We need the consistency of thick semolina porridge. When the desired thickness is achieved, turn off the gas and transfer the paste to glass jar.

Stirring continuously, add 100 g to the gel. peroxide. When a homogeneous consistency is achieved, pour into a container Vanish and mix thoroughly again. Using a brush, apply the gel to the plastic frame and attach cling film on top with tape so that the composition does not dry out.

Attention: “Retrobright” exposure time is 12-24 hours. In the case of windows, this time is reduced. Ultraviolet light should not reach the composition, so the gel is left overnight and washed off early in the morning with a damp cloth. Plastic parts refrigerators or keyboard buttons can be left wrapped in film for a day or even more.

Industrial products

How to clean plastic windows from yellowness using household chemicals. There is a wide choice industrial products, for the care of plastic windows:

For the cleaning PVC profile is sold in a set, which also includes a rubber seal care product and lubricant for window fittings. “Phenozol” has an antibacterial effect, relieves static tension, is non-flammable, harmless to the skin of the hands, and biodegradable.

The prophylactic set “Phenozol” is recommended to be used twice a year. This will allow you to wash the profile, ensure easy opening of the window and extend the service life of the rubber seals. The product is applied to the frames and washed off with a damp cloth. The set includes:

FENOSOL (100 ml.) – neutral detergent composition for profiles, free of aggressive substances and solvents. Thanks to the antistatic effect, dust and soot do not settle on the washed profile for a long time. For PVC and aluminum profiles.
FENOFLEX (50 ml.) – a product that maintains the elasticity of rubber seals and prevents premature wear. Seals are lubricated in spring and autumn, so the rubber does not freeze in winter and does not overheat in summer.
FENOSOL (20 ml.) – aerosol lubricant for fittings. Softens friction and protects metal from corrosion. The oil does not smell, does not contain acids or resins.

In addition to "Phenozol" good feedback deserve the funds: " Amway L.O.C.», « PROFOAM 1000», « Spezial-Reiniger», « Mellerud», « Mr Muscle», « REHAU», « Cif cream», « MEINE LIEBE».

"COSMOFEN 20"– cleaner for PVC profiles (it is worth warning the reader that this product destroys at the molecular level thin layer plastic, thereby removing residual dirt and yellowness). Therefore, pay attention to the number after the name; the larger it is, the less aggressive the product. “COSMOFEN 5” is a strong solvent, used in production as a polish for polyvinyl chloride, as well as professional builders for removing scratches, cracks and friction marks from plastic surfaces. For regular cleaning, choose twenty and use no more than twice a year. A yellowed window sill can also be treated with Cosmofen or another solvent: "White Spirit", "Defender 30504"

Remember that before using any cleaner (solvent) for plastic, the window must be thoroughly washed with soapy water.

If none of the above helped and the windows are still frankly yellow, then the last resort remains - painting. There are special paints for plastic on sale; in the absence of one, you can use nitro paint or auto enamel.

Anastasia, September 1, 2016.

Seasonal washing of windows, including plastic ones, is a habitual action that can be done at least once every 6 months. However, after construction work Double-glazed windows in the house require urgent tidying up. How to clean plastic windows after renovation, what products to use, and what to avoid?

Before you search various options In order to clean windows after repairs, you need to take into account some useful tips. They can facilitate the process of cleaning double-glazed windows, saving time and effort.

Some rules and tips for bringing windows to their original form

Before starting any repair work it is important to properly protect the glass, frames, and window fittings from possible ingress of paint, plaster, primer and other materials. And also protect plastic windows from mechanical damage. To do this, you should at least cover them with a protective film.
After completing all the manipulations in the room, so as not to wonder too much about how to clean windows after repairs that have traces of glue or tape on them, it is important to remove everything within a couple of days. protective coatings. If this process drags on for several months, there is a risk that the film or construction tape will stick too much, it will be problematic to peel them off, and a sticky base will remain on the surface of the frames and glass.
If during repair work protective measures and safety measures in relation to double-glazed windows were violated, traces of dirt appeared on the surface of the profiles; sharp metal objects should not be used to scrape off dirt. This will damage the plastic. Can only be used special devices, sold in hardware and construction stores, often having either a plastic or rubber base.
As is the case with other windows, solutions based on soap shavings should not be used on double-glazed windows. laundry soap. Such solutions are very alkaline, and also leave noticeable white stains on a transparent surface, which are extremely difficult to get rid of.
If, when deciding how to clean plastic windows after repair, the choice is given to professional chemicals, it is important to follow all safety measures, protecting the skin and mucous membranes and not inhaling toxic fumes. After cleaning the windows, the room should be well ventilated. The preparation of solutions and the washing process itself must be carried out strictly according to the instructions indicated on the chemical product.
When choosing devices for cleaning any window surfaces, preference should be given to soft tissues, containing polyester, as well as white cotton materials, flannel. Rags should not fall off during washing. Paper towels, napkins, including microfiber ones, and regular newspaper are also suitable, helping to polish the transparent surface to a shine. It is not recommended to use toilet or other thin paper.
It is important to remember: cleaning windows should initially be done with outside, only then from the inside. First, the glass is cleaned, then the frames, fittings, and window sill. In this case, you should first thoroughly vacuum the entire profile to remove small particles of dust, soil, and plaster.
When using any strong product based on chemicals or alcohol, you need to make sure that it does not get on the rubberized areas of the double-glazed windows, and also does not remain for a long time on the surface of the frames and plastic, so that cracks do not occur.
When deciding how to clean windows after repairs, you need to remember that acetone products should not be used on plastic, especially when applied to large quantities or leave it on long term. Gels with abrasive particles and dry powders that can scratch the glossy surface are also not suitable for plastic windows. Use hot water and heated solutions of any type are also not recommended.
Window cleaning should be done at a time when direct Sun rays don't get into the room. If possible, this manipulation should be carried out in cloudy weather, in the evening or in autumn or spring.

In addition to the tips given above, you can give separate recommendations regarding specific methods for removing certain construction contaminants:

plaster, primer and other similar options should first be moistened with warm, almost hot water; you will have to repeat the procedure several times, simultaneously cleaning the glass surface with a rag or napkin;
The polyurethane foam must first be scraped off with a scraper, then try to soak or warm water, or using a special product (solvent), rub with a hard (but non-metallic) sponge;
paint stains come off easily if they are heated even with an ordinary but powerful hairdryer; under the influence of hot air, the paint “melts” and is easy to wipe off from the surface of frames or glass;
If the tape does not come off, it should be moistened with water using a soft sponge, then carefully trying; It is also permissible to soften the glue with steam using an iron or steam generator;
help against traces of adhesive tape or film various means, including special solvents and laundry soap.

Brief instructions for washing plastic windows and options for special cleaning products

Wipe the surface of the profiles with a soft, non-shedding cloth, collecting the first dirt. Then vacuum, including between the frames.
Carefully clean off any existing serious pollution using a scraper or special knives suitable for plastic. Remove any dirt with a dry brush or cloth.
Apply the selected cleaning or washing solution to the transparent surface. It is better to use a spray bottle for this, spraying the substance diagonally across the glass.
Wipe off the cleaning mixture using napkins or selected rags. Or use mops and double-sided scrapers for greater cleaning efficiency. Don't forget about spinning. Important: washing is carried out from top to bottom and gradually, with smooth movements.
Wipe the window dry with paper and newspapers. If necessary, cover it with special protective mixtures that do not need to be washed off; it is only important to apply and distribute evenly over the glass.
Then clean the frames, fittings and window sill.

One of the options for a visual process of washing a plastic window can be seen in the video:

How to clean windows after renovation? Several proven chemicals

« Mister Muscle", helps fight dirt, but does not leave unsightly streaks when used correctly.
Solvent « 646 ", which removes paint, primer and other construction contaminants without damaging the surface of double-glazed windows.
« Phenozol", a specially developed product for plastic profiles, with which you can also get rid of polyurethane foam.
« Bref", is an affordable and effective tool.
« Cosmofen 20", which does not contain strong chemical components, is therefore not suitable as a solvent, but fights against various contaminants. « Cosmofen 10" And " Cosmofen 5", acting as solvents.
« Penosil", fights various contaminants, and is available in a convenient bottle in the form of a spray.
« Mister proper", similar to the first remedy listed in the list.
Windshield wipers from the manufacturer « San Klin».

You should use products such as Comet with caution, choosing only gel-based options. Picking up additional remedy To clean a double-glazed window, it is worth considering that it should also not contain wax particles and chlorine.

Traditional methods of cleaning plastic windows

Sometimes there is no way to use strong and aggressive chemicals. And how to clean plastic windows after indoor renovation work in this case? You can turn to folk methods.

Fight against pollution plastic profiles The following tools will help in the apartment:

Nail polish remover, which should not contain acetone. You can use it to wipe off various stains, including glue or paint.
Vinegar, diluted in warm water in a ratio of 5:2, will make plastic windows look perfect.
Foaming gel cleanser, suitable for washing dishes, will remove surface dirt without damaging the plastic or leaving streaks. It is enough to dissolve a couple of spoons of the gel in a bucket of warm water, foam well and wash the windows with the mixture.
Ammonia, diluted in warm water, eliminates the effects of repairs visible on plastic profiles. It will take a couple of teaspoons of the substance to add a little to a liter warm water.
Strong acetic acid , dissolved in water, acts like ordinary vinegar and is also suitable for cleaning double-glazed windows. It will help get rid of yellowed areas on the surface of the profiles that could have arisen under the influence of smoke or sun. We also recommend reading the article.
In emergency cases it can save kerosene, which should be applied exclusively to the site of contamination. Helps with paint stains. Additionally you can use petrol.
Another popular trick: moisten a piece of natural, undyed leather in medical alcohol. Then wipe the windows with it, removing dirt.

Sometimes you can find advice that it is permissible to wipe the surface of double-glazed windows with solutions of soda or table salt. However, this method can lead to unnoticed trauma to the plastic and will soon damage the windows.

Two additional tips on how to clean and protect plastic windows

Tip one: By dissolving a few tablespoons of dry potato starch in a gentle detergent, you can achieve a shiny plastic surface. In this case, you won’t have to rub the profiles with newsprint for a long time.

Tip two: To prevent double-glazed windows from getting dirty too quickly, after cleaning they should be wiped with a solution of glycerin and ammonia. For a liter of warm water you will need two large spoons of glycerin and a couple of spoons of ammonia. There is no need to wash off this mixture; it will protect the windows from dust, fine dirt, and prevent fogging of surfaces.

Washing windows is a tedious task. However, observing everything valuable recommendations, relying on advice and selecting the most relevant remedy for a specific problem, you can put plastic windows in order after repair in 20-40 minutes, without damaging their surfaces and keeping them clean for a long time.

After repairs and installation of new double-glazed windows, they must be cleaned. To make the window cleaning process quick and successful, I suggest you figure out how to clean plastic windows and window sills with your own hands at home.

Cleaning the frame and window sill

Oddly enough, it is recommended to start washing plastic windows from the profile and window sill. This is due to the fact that during the cleaning process, already cleaned glass can be accidentally stained, so it is necessary to clean the window sill of a plastic window first.

Despite the fact that the plastic seems very durable material, not every detergent can be used. What cleaning tools and products should not be used and how to remove stains from plastic window sills?

5 prohibited drugs

Can be used for washing plastic store products(price depends on the manufacturer), or hand-prepared mixtures. But it is imperative to take into account that the composition of this or that product should not contain aggressive substances.

So, what means should you definitely not use?:

Image		Recommendations
		Means 1. Abrasive powders
		Remedy 2. Solvents and acids Do not treat the surface with solvents or substances that contain acid. They simply corrode the material. Before use, check the composition of the cleaners for acetone and chlorine.
		Remedy 3. Wax It is highly undesirable to rub profiles with wax polishes. The frame will become covered with greasy yellow stains that are almost impossible to remove.
		Remedy 4. Pharmacy products Use ammonia, hydrogen peroxide, Activated carbon- forbidden. They have a detrimental effect on PVC material s.
	Remedy 5. Sharp objects Plastic will not survive active mechanical treatment, so you can’t use steel wool or sharp tools for cleaning either.

5 methods on how and what to clean windows with

Windows need to be cleaned regularly. Both after installation and during routine cleaning. If you don't wipe them, then throughput glass may decrease by 10%, and the frames will become covered with stubborn stains. In such a situation, not a single product for plastic window sills and windows can help.

Instructions presented in the table will tell you what you can use and how to wash plastic window sills from stains:

Image	Type of pollution
	Method 1 Scotch tape marks can be removed if applied: Scotch. Apply a fresh piece of tape to the stain and quickly tear it off. Oil. Apply to desired area vegetable oil and leave for 10 minutes. Then wipe with a napkin. Vodka. Wipe sticky marks with a cotton swab dipped in vodka. Eraser. Erase the fresh mark with a stationery eraser. Using the same methods, you can remove marks left after removing the protective film.
	Method 2. Paint spots are removed perfectly if you take: Silicate based adhesive. You can clean plastic windows from small drops of paint by applying a little silicate glue to them. It will dry and pull the paint off with it. Nail polish remover. Soak a cotton swab in the product and apply to the area for 5 minutes. Use a rubber spatula to remove any residue. Make sure that these substances do not contain acetone.
	Method 3 Traces from polyurethane foam easy to remove: Rubber scraper. Dimexide. Treat the dried foam with dimexide and leave for 3 minutes. Remove any remaining residue with a damp sponge. Harmless solvent. You can use a special store-bought solvent for plastic items.
	Method 4. Soot and soot - Such stains on plastic windows can be easily removed with ordinary soap solution. Mix 10 gr. grated laundry soap and 200 ml of water, then thoroughly wipe the surfaces.
	Method 5 Traces from yellow spots and "construction" materials- can be removed with soapy water. For better results, you can use dishwashing detergent.

Cleaning glass

We found out how to clean stains on a plastic window sill and profile. Now let's look at how to properly wash glass. The algorithm is quite simple:

Use a clean sponge dipped in water to remove dust and dirt from the surface.
After treatment with a sponge, windows should be sprayed with a cleaner and wiped from top to bottom, adhering to one direction of movement.

On last stage glass is rubbed with flannel or newspapers until shiny.

The table contains a list of the most effective means that clean glass without streaks:

Image	Means
	Shop Sprayer Spray the surface with it and wipe with flannel. It is enough to do this 1 time.
	Water + starch/chalk/vodka Add any of the following components to the water. After this cleaning, the glass will shine.
	Onion You can easily remove insect marks with half onions. Simply wipe the stains and rinse with water.

conclusions

We found out how to quickly clean profiles and wash glass. I hope that now you won’t have to set up for a long time, but will get to work with ease. The video in this article will clearly show the effectiveness of some remedies. If you have your own recipes, what to wash with plastic window sill and glass – I would be grateful if you voice them in the comments!