Options for decorating walls in the bathroom. How to decorate a bathroom other than tiles: a variety of alternative solutions

Our day begins with the bathroom and ends with it. Therefore, it occupies an important part of our life.

In this article you will learn which materials are best to use for finishing the floor, ceiling and walls of the bathroom.

Floor finishing

We all know well that the bathroom is a place where there is a lot of water. Splashes of water, dust and dirt end up on the floor, and we have to protect it well from this.

But how? This problem can be solved with the help of properly selected flooring.

Often, ceramic tiles are chosen for the bathroom, which are easy to clean, but will be a little slippery when water gets in. Along with tiles, porcelain tiles and mosaics are good finishing floor materials.

More budget option is linoleum, but when water gets in it becomes not as slippery as tiles. In addition, water can accumulate between the seams, which will lead to early deterioration of the material.

The following finishing material is a natural stone. If we compare it with linoleum, we would like to note that the stone is much more expensive, but, of course, better quality.

Another reason why the stone is not popular is that it becomes very slippery when exposed to water, which is dangerous for human life.

Self-leveling floor is a polymer mass that must be applied to a primer. After hardening, you will get a beautiful floor covering that is also waterproof and non-slip.

But the only drawback is the high cost of the material, so self-leveling flooring is not very popular among buyers.

Paul from natural wood. It would not hurt to specify the type of wood when purchasing. After all, there are not so many moisture-resistant ones - teak, larch, puinkado, beech.

But whatever you choose, be sure to treat the material with moisture-resistant products for strength and durability. Yacht varnish also does a good job.

Bathroom wall decoration

There are many materials available for decorating bathroom walls. Let's look at them all in more detail.

Tiles and porcelain stoneware, these two materials are somewhat similar to each other. They both repel water and do their job well. They differ from each other only in price and quality.

Finishing plastic panels, but when choosing them, you need to be very careful, as there are many fakes. They consist in the fact that they do not have a special coating between the seams that would protect them from water ingress.

But fakes can be immediately noticed, since they should be visible.

The bathroom can also be decorated with acrylic waterproof paints. You can choose any color that suits your room interior.

But, before you start work, do not forget to properly level the walls so that no defects are visible.

The walls in the bathroom can also be decorated with wallpaper. But which ones?

First of all, these are simple waterproof wallpapers that are made of durable material.

Vinyl wallpaper is an expensive option, but reliable.

Photos are wallpaper, but they, of course, must also be moisture resistant. Otherwise, they will last you no more than a month.

On given time, the most popular wallpaper is glass wallpaper. They will certainly be moisture-resistant and water-repellent.

You can choose the color and design of such wallpaper yourself or order it. Washable wallpaper for the bathroom – perfect option.

Don’t pay attention to the cheapest options, because their material is simple paper, which will get wet and tear after a few days.

Ceiling finishing

The ceiling in the bathroom is also very important. We are used to the fact that he often light tone painted with waterproof paint. But now you can see many other interesting options:

Suspended ceiling, great option, since all electrical wiring or defects in the rough ceiling can be hidden between the ceilings.

Tension is the most practical, but at the same time the most expensive.

Reliable and durable - ceiling with vinyl covering, it can even protect against water leakage from the top floor if you live in an apartment.

(2 votes, average: 4,50 out of 5)

It is no secret that tiles are the most used material when decorating bathrooms, as they are very practical, aesthetically pleasing and durable.

Is there any real alternative tiles in the bathroom? Oddly enough, there are, and surprisingly there are a lot of such materials.

In this article we will look at how you can decorate a bathroom without using tiles.

How to decorate the walls in the bathroom

The tile was the only thing and objectively the best way finishing bathrooms for many years, however last years market building materials has significantly transformed, and today, instead of tiles in the bathroom, you can use some other materials. Let's talk about them in order:

• One of these finishing materials serve plastic panels. The undeniable advantage of the panels is their ease of installation, which even an inexperienced installer can handle. In addition, the appearance of the material is quite decent, and caring for it will not cause difficulties. In the assortment of hardware stores today you can often find plastic panels for the bathroom under tiles, which on the wall are almost impossible to distinguish from the tile covering. Like other PVC materials, the panels are not at all afraid of moisture and can last for many years without losing their “marketable” appearance. The disadvantages of plastic panels include their relatively low strength and the possibility of mold and mildew forming behind the finish if they are installed without additionally sealing the seams. PVC installation panels are usually made on lathing, which takes away about 4 cm from the area on each wall.

Advice! If you do not know whether to lay tiles behind the bathtub, then we will answer you - it is not necessary, provided that the junction of the bathtub with the finishing material is reliably sealed.

Advice! Before replacing tiles in your bathroom, make sure that the option you use will not worse material, proven over decades and with worldwide recognition.

• IN modern interiors walls in bathrooms are often decorated with artificial, as well as some types of natural stone. For example, finishing with natural marble not only looks great, but also allows the walls to “breathe.” The only drawback of this type of bathroom decoration is its cost. Before you begin laying stone slabs, you must first prepare the walls and carefully level them. This type materials are always in fashion and look impressive and modern. Any bathroom can be completely transformed by for a long time, thanks to the quality and durability of the stone. Granite and marble are capable in the best possible way replace tiles, but not everyone can afford to implement such luxury in their bathroom. Its installation will also be expensive. This coating also has a disadvantage - marble tiles not resistant to liquids that contain acid. Some types household chemicals have the ability to ruin it, and hair dye can eat into the tile.
• In addition, glass and mirror slabs. This option will be even more interesting when applied to reverse side holographic pattern glass. There is also a material such as glass velvet, which is a multilayer glass coating with a decorative layer, but such material will be very expensive.

How to finish the floor and ceiling in the bathroom

If you don’t know Wooden floors in the bathroom, then here, perhaps, we can help you with advice. For, in addition to tiles, porcelain stoneware can be used. It is better to choose one with a rough surface to avoid slipping on wet floor. Mosaics are also suitable for bathroom flooring, although it is recommended to seal the seams between the elements with special glassy mixtures.

Often, especially when decorating a bathroom in nautical style, for cladding the floor, sea pebbles are used, laid like a mosaic. The disadvantage of this coating is its “coldness”, so it would be better to install a heated floor system underneath it.

A stone floor will also be a good alternative to tiles, but it is better to give preference to artificial materials, since they are much more practical and less capricious compared to natural ones, not to mention the difference in cost. Floors made of moisture-resistant wood - teak, malagon, wenge - can also be used in the form of parquet, but will require a special coating protective impregnation. This type of finishing is very aesthetic, environmentally friendly and always remains relevant, because wooden floor- warm floor.

Floor finishing options such as laminate and flooring are considered very popular and practical. PVC tiles For bathroom. As for the ceiling, the most popular options here are:

1. Plastering the ceiling followed by painting - classic inexpensive option, which, however, is already of little use in modern practice.
2. Suspended ceiling structures are a more practical method and method used.

As a rule, decorative, plastic and mirror panels are used as finishing. They differ from each other in appearance and cost, but are equally durable and easy to install and maintain. As you can see, the bathroom is not finished with just one tile. However, when planning a renovation, it is still worth thinking about whether it is worth changing the familiar and proven material for something else.

You have become the owner new apartment or did you just want to update your bathroom interior? Don’t want to overpay and decide to do everything yourself? Are you lost in the huge selection of materials?

The information in our article will help you navigate.

How to choose material for wall decoration

A bathroom is a room that has its own specific properties that simply cannot be ignored during production. repair work. The most important of them is the presence of humidity in the room, lack of good ventilation and exposure to various aggressive detergents and cleaning agents.

In conditions high humidity Fungi and bacteria also feel comfortable and will be happy to be your neighbors. In addition, bathrooms usually have small sizes Therefore, it is very important to use durable materials for finishing to prevent them from being accidentally damaged by any objects (basins, buckets, etc.). Thus, the materials that will be used to decorate the walls of the bathroom must have the following properties:

• moisture resistance
• chemical resistance
• lack of breeding ground for fungi and bacteria
• strength
• durability
• easy care
• decorativeness.

Preparing walls for finishing

Before carrying out repair work, the following factors must be taken into account:

• Condition of the walls in the room. They must have a flat surface. How perfectly this needs to be done depends on the material you plan to use for finishing. If smooth ones will be used roll materials or painting, then not the slightest blemishes should be noticeable on the wall. If it is tile or Wall panels, then minor irregularities here will not interfere with high-quality repairs.
• Presence of old finishing. So, if the walls are already covered tiles, then it is necessary to remove it, and thoroughly clean the remaining adhesive for laying tiles from the surface. This is a very long and labor-intensive process. If the walls are painted, you can leave the paint on, but depending on the new wall materials, you may need to use a primer.
• On oil paint, for example, putty and tiles do not adhere well, plaster does not adhere well to smooth concrete, and when using soil, a rough, strong film is formed and good adhesion of the materials occurs. This is the most quick way preparing walls for subsequent finishing, since it does not provide for complete cleaning of the surface from the old coating.

Watch the following video.

Selection of finishing materials

When decorating a bathroom, the choice of materials is simply huge, so we’ll just list them:

• Dye
• Ceramic tile
• Mosaic
• Porcelain tiles
• Plastic panels
• Mirror tiles
• Agglomerate
• Marble
• Tree

Ceramic tile

Laying tiles on a bathroom wall is the most common type of renovation and is classic version. The choice of tiles in color, size, texture is simply huge. There are various inserts, decors, borders, panels that help give individuality to the bathroom. Caring for her is also quite simple.

On to the cons this type of material can be attributed to large monetary and labor costs, and also, oddly enough, durability.

Every year there are few people who want to lay tiles in the bathroom, so you need to take their choice seriously. Are you confident that a vibrant animal print on your wall will still bring you joy two years from now, or five years from now? Then it’s worth stopping at calmer ones, classic colors and drawings. Shades of beige, blue, green will never go out of fashion.

Porcelain tiles

Porcelain tiles are a modern competitor ceramic tiles. It is much stronger and more durable than it. This material produces the best imitation of natural stone, which is important for original design solutions.

To the disadvantages Porcelain tiles can only be attributed to a higher price than conventional ceramic tiles.

Porcelain tiles- it's environmentally friendly pure material, which in its own way operational characteristics superior to natural stone. Microorganisms do not live on it.

Plastic panels

A suitable material for bathrooms is plastic. It is not afraid of water and temperature changes, does not fade, and can withstand heavy loads. That is why PVC panels are very popular. Their advantages include convenience, simplicity and speed of installation, as well as the almost complete absence of dirt during repairs.

Any novice craftsman can handle covering walls with plastic panels. With their help you can easily create an original interior.

For example, alternating several colors, you get a striped decor. They can be secured not only horizontally, but also vertically and even diagonally. The negative aspects of plastic panels include the formation of condensation on it and their instability to mechanical damage, as well as the need to assemble the sheathing before installing them.

Painting walls - easy and practical

Painting the walls in the bathroom is the oldest, but still relevant, method of renovation. The main thing is to choose the appropriate paint that is not afraid of water. Latex or water-dispersion acrylic paints are best suited for this.

Painting must be done in 2-3 layers.

Walls painted in different colors look original.

And if you have drawing skills, then you can try to draw your own plot. If not, you can buy ready-made stencils.

The main disadvantage of painting is the long and thorough preparation– it is necessary to perfectly level the surface of the walls. But caring for painted surfaces is easy and simple.

Wallpaper for the bathroom - original, but short-lived

Yes that's right! They even put wallpaper in bathrooms. These are certainly not ordinary paper wallpaper, and moisture resistant. For example, vinyl, acrylic or glass wallpaper.

Rolls of such wallpaper have a special sign in the form of three waves, which means that they can be used in wet rooms.

The choice of such wallpapers is impressive, they require minimal maintenance, they stick quickly, but they have a weak link - the joints. Moisture often gets into them, so you can’t count on the durability of such repairs.

Drywall - easy, cheap, but cramped

IN Lately To decorate walls in bathrooms, special moisture-resistant plasterboard is used. What makes it different from the usual green color. The use of plasterboard does not require special preparation of the walls; it is easy and quick to install, has good sound and thermal insulation, and is inexpensive. It would seem like an ideal option, but it is not without its drawbacks.

Installing drywall requires fixing profiles to the walls, and this reduces the size of the room, which is critical for small standard bathrooms in our country. In addition, drywall itself has an unaesthetic appearance and requires additional costs for coating with other materials.

Decorative plaster - designer wall decoration

If you don’t want to be like everyone else, but like an individual approach, then you should pay attention to this design decoration walls, like decorative plaster. Previously it was used only in living rooms, but now it is also appropriate in bathrooms. The properties of the plaster are such that it is not afraid of moisture and has high absorbency. Water vapor will no longer hang in the air, and condensation will not form on mirrors and furniture. Decorative plaster can be smooth or textured, has no seams, is attractive and unique.

Natural materials in finishing

Connoisseurs of naturalness when decorating walls will pay attention to such natural materials like wood, marble and natural stone. Usage wooden coverings will remind you of a sauna or a country bathhouse. However, wood is susceptible to rotting, so in order for it to last a long time, it must be treated antiseptic impregnation or water repellent.

Wall decoration with marble and natural stone will give the bathroom the flavor of a primitive home or a Roman bath, but this material is capricious and requires careful care. Among other things, it is very expensive.

Alternative materials for wall decoration

One of the new materials in interior decoration is agglomerate - fake diamond . It consists of both natural (marble, quartz, spar) and artificial components (plastic, resin). When heated above 600°C, this material becomes similar in properties to plasticine and can easily be used to finish surfaces of any most complex configurations. The only disadvantage of this material is its high cost.

The agglomerate has high strength, resistance to damage, beautiful texture and very easy to care for.

Unusual and beautiful material for finishing bathrooms is mosaic. It can be not only stone or ceramic, but also metal or glass, therefore it is one of the favorite materials of decorators. Based on your sketch, a drawing of any type and size will be assembled on a computer. Disadvantages include high cost and a long, labor-intensive application process. But your bathroom will become a real masterpiece.

Mirrors are also a favorite material of designers. They make the room larger, brighter, airier.

When finishing a bathroom, tiles are most often used. It's not about tradition, it's true comfortable material. Hygienic, not afraid of dampness, beautiful, durable. But this is not the only one suitable material, nowadays there is something to decorate a bathroom other than tiles.

Wallpaper

Paper ones are not suitable; they are short-lived in damp conditions. Acrylic and vinyl are better. When purchasing, choose one with the “three waves” symbol or a painted washing brush (moisture resistant), they are more stable. But still, water resistance is insufficient: moisture penetrates the joints and gradually renders them unusable.

But these definitely fit. They are made like fabric, only the threads are made of glass. Special jacquard machines allow you to obtain a varied surface pattern.

A very high-quality coating, durable (lasts up to 30 years), environmentally friendly, non-flammable, and does not require a perfect surface when applied. Not afraid of fungi and dampness. Moreover, this wallpaper itself protects the walls from damage, it is so strong. Unfortunately, the price is much higher regular wallpaper, but it's worth it.

Do not confuse when applying: the inner and outer sides are similar, but there are differences. In rolls, the front side is wound inward, some manufacturers mark with a colored stripe outer side. Special glue is required. Fears of “harmfulness” transferred from glass wool are stupid and due to a lack of information: these are completely different materials. After finishing the walls, such wallpaper can be left as is, or painted, primed or decorated additionally - as desired. Such wallpaper will adequately decorate the bathroom.

Similar to wallpaper, but made from PVC films, the glue has already been applied. Cheap, but requires very careful preparation of the walls before finishing, which increases the cost of the result. Yes, and you need to apply it very carefully. And it’s still unstable, sometimes it swells or peels off, which doesn’t paint the bathroom...

On video: range of PVC panels

Simple finishing: 2 slats are strengthened, panels are attached to them one by one. Big choice, low cost, moisture resistance. In addition, they can cover pipes, cables, without complicating access to them, even minor construction defects in the walls. However, moisture condensation is possible between the walls and panels. In addition, the material is fragile, the impact leaves dents or tears (however, this damaged socket is easy to replace if you left spare ones). Over time they turn yellow. Another minus: the availability and simplicity of the material determines its prevalence in in public places. And the bathroom (by analogy) does not look chic enough...

We can only talk about moisture resistant drywall, the other one is not suitable for finishing a bathtub. Cheap, easy to install, improves sound insulation. It is not particularly beautiful in itself, so subsequent painting is advisable. In addition, during installation the volume of the bathroom decreases, and if it is already small...

Mosaic

Labor-intensive finishing, and artistic taste is also needed. But great opportunity choice, in principle any design is possible. But, as for maintenance, the tiles are simpler in this regard, they have fewer irregularities.

Stone, natural and artificial

Natural is so expensive that for some it may be a disadvantage rather than an advantage. The stone is heavy, which requires special care during installation. It's better to hire a specialist. Marble (often also referred to as breccias, dolomite, carbonate mixtures) requires care. Granite has a high strength. A high price alone does not guarantee amazing results. For example, by completely finishing a bathroom with granite slabs, you can turn it into a kind of cave, and not at all luxurious...

Reduces space, so a bad choice for small rooms. Artificial is in many ways similar to natural, but much cheaper.

Tree

Not a bad choice. The material requires special impregnation, but it can still be used in damp conditions. You can carefully burn the panels, soak them in stain to reveal the texture, and make them more beautiful. It lifts the mood somewhere on a subconscious level, perhaps we are all in past life- Druids. Expensive. Requires appropriate design in other elements of the bathroom (hangers, shelves, mirrors).

A bit similar ordinary plaster when applied, it is also a thick mass, smeared on the wall. But only in the eyes of a non-specialist, in reality it is a special material. Very beautiful if done right. Now in production various types such plaster, so it’s not difficult to choose what suits your concept of beauty. In addition, the “marbled” finish differs very significantly in cost from real marble. Clearly, in the direction of cheapness.

Painting

Perhaps one of the cheapest options for replacing tiles (although the price depends on the selection of paint), It is better to use latex paint - it is resistant to dampness. The result depends little on the method of application - any will do: brush, roller, spray. And strongly - from the artistic taste and skill of the performer. This does not mean monochromatic painting, although here you can choose any color. You can draw real pictures or use stencils. Alas, the gray soviet walls only evoke despondency...

9925 0 0

Decorating the walls in the bathroom: 6 ways to satisfy the sophisticated artistic taste of the district police chief

September 2, 2016
Specialization: Capital construction works(laying a foundation, erecting walls, constructing a roof, etc.). Internal construction work (laying internal communications, rough and fine finishing). Hobbies: mobile communications, high tech, computer technology, programming.

I recently received a new order for a bathroom renovation. I would not have told you about this case if it were not for the fact that the owner, who, by the way, heads the district police unit, had not decided on how to decorate the walls in the bathroom before concluding an agreement with me. That is, he, of course, said that it was possible to tile the surfaces, but asked me to help select alternative options for finishing the plumbing room.

I told him in detail what materials there are for decorating walls in the bathroom, what their pros and cons are. I will describe in detail the finishing options that I offered him in this material, so that everyone interested can also choose something for themselves.

Well, at the end I will tell you what wall covering my client chose. You might want to decorate the walls of your own bathroom with it yourself.

Existing finishing materials

First, I’ll tell you what materials can be used for decorative design plumbing facilities, and then together we will decide how best to decorate the bathroom. I’ll warn you right away that there will be subjective assessments, so if you don’t agree with my opinion, you can express yours in the comments.

So, in my practice, during renovations in bathrooms and toilets, I used the types of finishing materials that are listed in the diagram above. Not all options were given excellent result, and in each specific case you need to choose based on the area of ​​the bathroom, the presence of a window, height, installed plumbing equipment, and so on.

Features of individual decorative materials

I will tell you about the pros and cons of the most common options, and you are free to choose what to cover or cover the walls with yourself.

Method 1 - Ceramic tiles

1. Long service life. Despite significant temperature fluctuations and high humidity air, ceramic tile cladding will last you for several decades. If, of course, you glue it correctly.
2. Antiseptic properties and hygiene. The tile has a smooth and dense surface without pores, so dust and dirt do not stick to it, and it can be washed without any effort, using ordinary household detergents.
3. Aesthetics. In construction stores you can find such a wide variety of tiles that even the most experienced buyer in this matter can make his choice.

Tiles happen different colors, sizes and textures. You can make plain walls, lay out some kind of ornament and even a pattern (for example, from a mosaic).

The same applies to cost. The price of tiles depends on many factors, so you can always choose affordable option. But here I advise you to pay attention to one nuance. To the costs of the material, you need to add the amount of remuneration for the workers who will line the walls.

Of course, you can do everything yourself, but for this you need to have certain skills.

As I already said at the beginning of the article, the customer of the renovation just wanted to move away from the classics in the form of tiles, so I won’t focus on this, moving on to the description alternative options wall decoration in the bathroom.

Method 2 - Wallpaper

So what can I say about the wallpaper? First of all, ordinary paper varieties will not work here. If you are looking for something to cover your bathroom with, you should immediately pay attention to moisture resistant wallpaper, which tolerate exposure to humid air well.

Despite its apparent unusualness, this finishing material for sanitary facilities has certain advantages, although it is not without its disadvantages. So that you can objectively decide what you can use to cover your bathroom walls, I suggest comparing the pros and cons of the option under consideration.

pros	Minuses
The wallpaper itself costs little, as does the work of covering the walls with it. Moreover, there is hardly a person in our country who has not glued wallpaper himself at least once in his life. That is, if you are looking for the most economical option, you don’t need to look further, you have found it.	Paper, no matter how well it is protected, deteriorates when wet. Therefore, no matter how much your grandmother, who still has a large stock of wallpaper from the last renovation, would like it, I categorically do not recommend gluing it in the bathroom.
The wallpaper is easy to stick and remove. Therefore, if your significant other is suddenly tired of the appearance of the bathroom, within one or two days you can radically change the design of the room.	After gluing, glue may appear on the wallpaper, which increases in size under the influence of moisture. As a result, your brilliant design idea will be hopelessly ruined.
A wide variety of options makes it easy to combine various wallpapers, which gives the room a truly unique character. You can do the same with tiles, but in this case there is simply an unlimited field for imagination.	Paper is a hygroscopic material. Therefore, if you cover the walls with such wallpaper, during operation they will absorb water vapor dissolved in the air, which will sooner or later cause them to collapse.

But, if you are determined to use wallpaper to decorate your bathroom, I will give you some recommendations on how to glue the walls in it so that they look perfect and do not change their appearance during use.

So, I suggested to my client (and I suggest you) to use the following wallpaper:

1. Washable. Have protective covering, which does not allow water vapor to penetrate into the deep layers of paper. Such wallpaper does not increase in size or swell during use. They have a relatively long service life.

Another advantage is ease of cleaning. Dust and dirt can be easily removed from the surface of the protective layer, and if it appears, mold and mildew can be removed. In this case, after processing, the pattern of the material remains intact.

1. Vinyl. Ideal for finishing walls in rooms with high humidity levels. They withstand not only water vapor, but also direct contact with liquid (albeit short-term).

I consider the main disadvantage of this material to be high cost. Typically, wallpaper is chosen to save on room decoration. But in this case it won’t be possible to do that. But in defense vinyl wallpaper I can say that they have a huge service life. In the coming years, you definitely won’t have to decide what to cover your bathroom walls with.

1. Self-adhesive. These wallpapers, in truth, are a type of vinyl, but I decided to separate them into a separate block.

They differ in the method of gluing. Already applied to their back surface adhesive composition. You just need to moisten the surface of the wallpaper with water, then press it onto the surface to be treated.

1. Liquid. This wallpaper, on the contrary, is not wallpaper in the classical sense of the word. They are a dry powder, from which a kind of decorative plaster is then made, which is used to treat the walls.

This material has a long service life, is resistant to moisture and is easy to clean. In addition, I can say with confidence that using liquid wallpaper you can decorate your bathroom very effectively.

1. Glass wallpaper. Unique look finishing material that looks like wallpaper and sticks the same way, but is absolutely impervious to moisture. Therefore, they are simply ideal for furnishing a bathroom.

Another huge plus is the ability to paint the surface on which the wallpaper is glued. That is, you can combine any colors, patterns, shapes, and so on. And the special texture of the wallpaper will only add sophistication to the interior of the sanitary room.

By the way, changing the appearance of the bathroom is very simple. Take a brush or roller and repaint the walls. Your significant other who wants to feel like a designer will really like this.

1. Photo wallpaper. Another way to inexpensively and effectively decorate a bathroom. I advise, as in all other cases, to choose moisture-resistant wallpaper that does not deteriorate from exposure to water or water vapor.

As for gluing, there are no subtleties here. The main thing is to combine the canvases correctly so that the drawing looks solid.

Whatever type of material you choose, you need to maintain a sense of proportion and select wallpaper to match the overall interior solution. Otherwise, you will end up with a kind of eclecticism that will cause confusion, not tenderness.

Method 3 - Paint

Another very simple, fast and inexpensive way finishing the walls in the bathroom - painting. As with wallpaper, you need to choose and buy moisture-resistant paint and varnish compositions. If this is not done, mold stains will soon appear on the treated surfaces.

To avoid such troubles, I advise you to buy paint that contains fungicides - substances that prevent the formation and development of microorganisms on treated surfaces.

Most often I had to use water-based paint for bathrooms. If it is applied correctly to thoroughly dried surfaces, it penetrates deeply into the mineral surface, after which it retains its characteristics and attractive appearance for a long time. However, it is necessary to choose a latex-based water-based emulsion, which is more durable, strong and can withstand moisture well.

Construction stores offer great amount colors and shades. If for some reason you don’t find something suitable, you can contact specialists who will tint the paint using special equipment, adding the necessary pigments.

Paint, among other things, allows you to significantly save on the finishing work itself. A pre-prepared surface can be painted with a brush or roller in a matter of hours.

Additional benefits of using wall paints in bathrooms are:

• high resistance to water vapor and splashes of water;
• ease of surface care;
• no abrasion during operation;
• high hygiene.

It is possible to beautifully paint the bathroom walls, as well as paste them with wallpaper, only if the surfaces of the room have been thoroughly plastered and puttied beforehand. Otherwise, all defects and other imperfections will be visible.

Therefore, giving preference to the options listed above, immediately decide how to plaster gas silicate block, brick or monolithic concrete so that later you can easily hang wallpaper in the bathroom or paint the walls with water-based paint.

Method 4 - Plastic panels

Recently, plastic panels that can be used for finishing have become increasingly popular. various rooms, including the bathroom.

Structurally, this finishing material consists of rectangular sheets of plastic (reminiscent of wide lining), which are equipped with a system of tongues and grooves at the ends for tight joining to each other, as well as special perforations that facilitate installation.

The panels can be painted in a specific color or have a pattern that imitates a mosaic. Some types of materials are decorated with three-dimensional images that allow you to effectively decorate your bathroom.

This finishing material for bathrooms has the following advantages:

1. Economical. The material itself is inexpensive, especially compared to tiles or, for example, wood panels. In addition, the process of installing polymer panels itself does not require any special qualifications from the master (as is the case with tiles).
2. Easy to install. To install the panels you need wooden sheathing, with which you can easily level the walls. Therefore, you will not need to plaster or putty them, achieving a perfectly smooth and smooth surface. I would say that paneling a bathroom is even easier than painting the walls.
3. Long service life. Plastic perfectly withstands aggressive factors external environment, which are characteristic of the microclimate in the bathroom. At the same time, he not only preserves his specifications, but does not change the appearance.
4. Waterproof. The polymer surface does not absorb water even in direct contact with liquid. Therefore, the humid air in the bathroom in no way affects the operation of the plastic panels.
5. Wide variety of designs. In stores you can find various panels: from simply painted ones to models with flowers and animals. Therefore, the scope for your creativity will not be limited in any way.

Now as for the shortcomings. I consider only one significant disadvantage: poor environmental friendliness. Still, polymers do not have the best effect on human health, releasing substances harmful to humans during operation.

However, modern manufacturers are constantly working to improve panels and, perhaps, when you read this article, material that has minimal, if not zero, emissions of harmful substances is already being delivered to the store.

I would like to devote a few words to the choice of colors and patterns. I have extensive experience in finishing bathrooms with panels, so although I do not have a designer’s education, I can still give some practical advice:

1. Choose panels based on the area of ​​your plumbing room. If the bathroom is small, give preference light shades and small drawings. This visually expands the space.
2. You can make the walls plain or combine several colors. If you bought non-white panels, make sure that their color matches the overall design style, as well as the color of the plumbing fixtures.
3. I advise you to buy panels for the bathroom with a minimum of catchy flowers and decorations. Especially if they are embossed. Dirt often accumulates in surface folds, and if poor ventilation– mold and mildew grows.

By the way, plastic panels allow you to mask all utility lines without any problems. To do this, you need to make the lathing above or in front of the pipes. There is no need to resort to additional tricks.

Method 5 - Decorative plaster

Performance properties modern materials improving all the time. And if earlier I would not have advised you to use decorative plaster to decorate your bathroom, now I not only advise, but recommend. By the way, my client settled on this particular design option for the plumbing room.

Modern decorative plaster compositions are made on the basis of acrylic with special additives, which makes the materials waterproof. They do not lose their color throughout the entire period of operation and can withstand significant temperature fluctuations in the air in the bathroom.

In addition, I can name a few more significant advantages of this type of material:

1. High coefficient of vapor permeability. Decorative plaster is capable of absorbing water vapor in the air and releasing it back. Therefore, unlike tiles, this finish is able to regulate the humidity in the room, creating a comfortable microclimate.

For example, I like that in plaster-finished bathrooms the mirror does not fog up after taking a shower, even if you forget to turn on the exhaust fan.

1. Easy to care for. Modern plaster for decorative wall decoration - this is not the delicate material with which I started working several years ago. Now the coverage is excellent mechanical strength and is not damaged by chemicals contained in detergents.

Moreover, after application, some compositions acquire antistatic properties, due to which they do not attract, but rather repel dust from the surface.

1. Possibility of creating unique designs . Decorative plasters are not only beautiful in themselves, but can also imitate surfaces made of other materials, such as marble.

In addition, if you have the appropriate abilities, you can paint a whole picture with this finishing material. But here everything depends only on the firmness of your hand and confidence in the impeccability of your artistic taste.

If I have convinced you of the need to use this particular material, then you will learn how to plaster the walls in the bathroom, that is, what specific type of finish to choose.

There are two large categories of plasters:

1. Smooth. The most common in this group is the so-called Venetian plaster, which is most often used for finishing plumbing blocks. It has a glossy surface that does not allow water to accumulate on the surface.

Venetian plaster imitates marble in its appearance, so it is unlikely that you will be able to make your bathtub unique with its help. You can only vary the colors and some effects. For example, I plastered the walls, making them look a little cracked.

Also in my practice, I worked with plaster using pre-made stencils. With their help you can create paintings on the walls. But know that such a service is quite expensive, since the process takes a lot of time.

1. Structural. After processing the walls, they form a certain ordered relief. You most likely know similar materials under the names “bark beetle” or “pebbles.”

Before purchasing such plaster, it is important to know that the textured surface retains liquid. If it's not for long, nothing bad will happen. But if the plaster gets wet constantly, this can sometimes affect it. appearance and strength.

This plaster can be used to decorate walls in the bathroom, but its service life will be much shorter than the service life of a smooth composition.

Finishing the conversation about this type of finishing material, I’ll give you a few more tips that once helped me:

1. Plasters are sold dry building mixtures and ready-to-use formulations. Buy dry powders. Ready-made plaster cannot be thinned by adjusting the viscosity. This often makes it difficult to work on walls.
2. If you buy material with coarse filler, do not mix it with a mixer mounted on a drill. In this case, you will have to achieve uniformity manually, using a trowel or spatula.
3. I find plasters with decorative fillers to be the most difficult to use. different sizes. If you have no experience at all with similar material, it’s best to hire a specialist or choose a different finishing option.
4. Do not buy water-soluble plasters. They are more environmentally friendly, but do not tolerate humid air well. If you had to plaster with this composition, after drying, treat the surface with protective wax.

Method 6 - Wood

Decorating a bathroom with wood is very exotic and rare way design of sanitary facilities. And we are talking here not only about the high cost of the material, but also about its inability to withstand external destructive factors characteristic of the bathroom.

Therefore, if you decide to use wood to decorate a room, I recommend following a few tips:

1. It is necessary to select wood species with a minimum deformation coefficient. This means that blanks and cladding parts will practically not change their original dimensions under the influence of high temperature and humidity.
2. It is advisable to buy panels or lining made of wood, which has high antiseptic properties. That is, mold and mildew will not develop on its surface. It's best if they are exotic plants, but you can take oak or hornbeam.

In any case, you should not forget about treating surfaces with antiseptics. However, you should make sure that they do not cause harm to humans, otherwise all your efforts to create an eco-friendly bathroom will be nullified.

1. When choosing a finishing material, you should check the humidity level. Only completely dried wood can be used. Otherwise, during operation it will be deformed, which will disrupt the harmony of the interior.

Remember that wood gets wet differently in the same bathroom. For example, a section of walls located near a sink or toilet will get wet more often. Therefore, to design such areas, I recommend using:

• beech elm or oak;
• larch or cedar;
• merabu or ebony;
• bamboo.

In all other zones, you can choose the type of wood yourself.

Remember that no matter how you protect the tree, it will become deformed during humid air. Therefore, wall cladding should be laid with small gaps. It is better to generally use the tree in fragments.

After installing the surface from natural materials must be treated with varnish or paint. By the way, I recommend repeating the treatment every 5 years so that the wood lasts as well as possible.

Varnish can also be replaced with oil, which gives the wood excellent hydrophobic properties. However, the instructions for its use suggest that impregnation of surfaces must be repeated at least once a month.

But a bathroom decorated with wood will be truly unique. I can count on one hand the times I have used this material for decoration.

Conclusion

The choice of finishing materials is a subjective matter. I told you about the options that I like. You also learned how and with what to plaster the walls in the bathroom. If you are interested in the technology of covering surfaces with plastic panels, you can watch the video in this article.

And if you have decorated your bathroom in some exotic way, I and my readers would be interested to know about it. In the comments to this material, you can tell what and how you did to create a masterpiece of home design.