How to connect a router via cable Internet. How to connect wired Internet via wifi router

Rostelecom is the largest provider of Internet communication services in the Russian Federation, serving the largest number of subscribers in the country. When using the services of this provider or planning to connect to it, it is a good idea to be able to set up the connection yourself. This will help if it's time to change the router to a more functional one or in case of reinstalling the OS. Of course, you can invite a specialist, but this will require additional financial costs, and you will also have to wait for him. While setting up the Internet on the Rostelecom network, done by yourself, will be done immediately and free of charge.

Setting up the Internet from Rostelecom depends on the technology and equipment that was used to connect the subscriber. For users living in big cities, connection is available via a dedicated line or through a fiber optic cable. In this case, a modem is not needed and you will most likely have to configure the router. For residents of less civilized areas, the service can be provided via telephone cable, which requires configuring an ADSL modem.

In this section of the manual you can find instructions for setting up a connection for both types of devices.

Via router

Within the scope of this article, the sequence of actions necessary to connect the Rostelecom Internet to specific model router. The following are general recommendations, which can be applied to almost any modern router:

  • To connect to Rostelecom Internet, you first need to connect your computer and router with the network cable that comes with the equipment. On the router, insert the wire into one of the LAN ports, on the PC into the network connector.
  • We include in electrical network both devices and launch them.
  • To enter the router control panel from a computer, the network settings on the PC must be set to automatic receipt IP addresses and DNS server addresses. You can check these options by going to the properties page of protocol version 4. To do this, in the Network and Sharing Center, click on the menu item for changing adapter settings. Then in the window that opens, select the connection via your network card, right-click on it, and select properties. IN next window double click on protocol version 4.
  • We launch any Internet browser and write 192.168.1.1 in its address bar. The exact address of the router can be found on its bottom panel or in the operating instructions.
  • In the window that opens, enter data for user authorization (usually the login and password admin), exact values which are also indicated on the label below or in the user manual.
  • After successful authorization, the device status page will open, where you need to find the WAN section.

Further configuration depends on the standard by which the provider provides access to the Internet. To connect most subscribers, the PPPoE standard is used, which is configured as follows:

  • On the WAN configuration page, next to the field in which you need to specify the connection type, select PPPoE.
  • In the following fields we indicate the name of the connection (usually any Latin alphabet).
  • Login and password in the operator’s network (provided by the provider, should not be confused with the authorization data in your personal account).

After confirming the changes made, the router will reboot and, if the data is entered correctly, a connection to the Internet will appear.

The Rostelecom company provides its subscribers with branded equipment, along with which a disk with a program for setting up the router is supplied. This software allows you to configure the router automatically with minimal user intervention.

Via ADSL modem

For subscribers who do not have access to Ethernet technology, Rostelecom provides services via telephone network cable. To connect your computer to the Internet via telephone communications, you need to use a special converting device - an ADSL modem. We'll look at setting it up next.

  • You can connect the Rostelecom modem to your computer in the same way as a router - via a LAN cable.
  • After connecting both devices to the power grid, go to the control panel of the modem from the PC by typing 192.168.1.1 in the address bar of the browser (we will find out the exact address in the user manual).
  • In the admin panel that opens, enter the authorization data (usually admin/admin, or see the manual).
  • We select the connection parameters, indicate the PPPoE type, and enter the user’s login and password, which should be in the copy of the contract.
  • Next, you need to specify the VPI and VCI values, which vary depending on the subscriber’s region of residence. We will find out this information from technical support.
  • If everything is entered correctly, all that remains is to reboot the modem and wait for the connection.

There is another configuration method - launching the application from the disk provided by the provider.

Attention! To plug home Internet Rostelecom can be connected directly to your computer, without using a router or modem.

How to connect to Rostelecom Internet on a computer

When connecting to the Internet through a router, in most cases there is no need to configure anything in the computer’s operating system. We simply connect one of the router’s LAN ports to the PC’s network card with an Ethernet cable. If the connection is made without a router, you may need to set some parameters.

As a rule, configuring a Rostelecom connection occurs through the Equipment Setup Wizard. Following the wizard's prompts, you need to specify authorization data on the Rostelecom network to connect using the PPPoE standard. If all the data is correct, the connection to the Rostelecom Internet will be established after confirming the changes.

Let's look at the procedure for setting parameters for different operating systems.

How to set up Internet from Rostelecom in Windows 10

To set up Internet from Rostelecom you need to perform the following steps:


Now access to the network will be possible after starting the connection, which will have to be done manually. On Windows 10, this process can be somewhat automated by setting up a shortcut. First you need to create it by selecting Create shortcut in the connection context menu. Then place this shortcut in the OS startup or activate the corresponding option in the shortcut properties.

How to set up Rostelecom Internet on a computer running Windows 7

Rostelecom Internet connection parameters for computers running Windows 7 are no different from those described above for the tenth version of this operating system. In addition, the network configuration will be the same for all versions older than seven. There are minor differences in the Windows XP interface, which are not difficult to figure out on your own, based on the recommendations given in this manual.

Today there are almost no people left in the world who do not use the capabilities of the Internet. Therefore, the relevance of the question of how to independently connect the Internet to a personal computer is growing every day. A PC that is not connected to the World Wide Web turns into an ordinary typewriter with calculator functions, i.e., most of the advantages of owning such a computer are simply lost. Below is a guide on how to connect your computer to the internet, as well as step-by-step instruction, how to set up the Internet without resorting to the services of specialists.

Preparatory activities

To connect to the Internet, first of all you should select the optimal Internet source for the user’s specific conditions: direct connection (connect the Internet to the computer via cable), Wi-Fi router, SIM card mobile operator, satellite communications, automatic telephone exchange. Then, if necessary, sign an agreement with the communication service provider, which is called the “Provider”.

It will provide its subscriber with the necessary means, for example, a modem or router, cable. If it is a cellular operator, then a special USB modem that is inserted into the USB port of the computer.

Direct wire connection

The method has a number of significant advantages, but it is not without major disadvantages, which can be decisive when the user chooses a connection method. It is very easy to implement and requires the least cost. However, the Internet provider must run the wire directly to the computer, which is not always possible or convenient. The cable must be connected to the PC's network card.

After this, you need to configure the Internet on your computer. The parameters entered vary depending on the communication service provider and the connection technology itself. The essence of the procedure is to create a connection with authorization. The following is an example step-by-step actions in a PC with operating system Windows system 8. In other operating systems supported by Microsoft, the procedure is similar.

The following sequential steps must be followed:


For Windows XP, a similar algorithm of actions can be briefly presented in the form of the following chain:

  1. Start;
  2. Network connections;
  3. Create a new connection;
  4. New connection wizard;
  5. Connect to the Internet;
  6. Establish a connection manually;
  7. High speed connection;
  8. Entering parameters from your Internet provider.

For Windows 7:

  1. Start;
  2. Control Panel;
  3. Network and Internet;
  4. Network and Sharing Center;
  5. Setting up a new connection or network;
  6. Internet connection;
  7. High speed;
  8. Enter parameters from your communication service provider.

Using a router connected by cable to the Internet

It's more convenient option for home or office, since it allows you to connect more than one PC to global network, and several at the same time, thereby creating local network. Today, it is rare for anyone to have only one computer in their apartment or office.

Insert the cable from your provider into the WAN port of the router. Connect computers through LAN connectors using patch cords. Enter the provider parameters through the web interface launched in the computer browser by entering the address written in the router's instruction manual (usually 192.168.1.1).

Via WiFi router

When using a wireless router, the steps will be similar to the previous instructions, but you will also need to configure WiFi. If your computer does not have a Wi-Fi adapter, you will need to purchase and install it.

Using Windows 8 as an example, to connect a computer via Wi-Fi, you need to do the following:

In one of the previous articles we looked at very actual question. Here we will imagine the opposite situation: how to connect wired Internet, if you have a wifi router.

How to connect wired Internet from a router?

And first of all, let's look at how. The placement of the router depends on how often you plan to use it: if you just need a Wi-Fi access point (that is, you will not connect anything to it via LAN), then it is advisable to mount the router somewhere upstairs in the middle of the apartment.

If you are going to connect wired Internet from a router to a computer or laptop, you will have to wait network cable to the room where the computer is installed.

Now let's look at connecting the Wi-Fi router directly. For this example, a TP-Link router is used.

So, to connect the Internet (wired) through the router, turn the device towards you to the side where the LAN ports are located.

This router has five LAN connectors: four ports yellow color and one blue connector. Yellow ports are needed to connect equipment (such as computers, NAS servers, etc.), and the port of blue color needed to connect to wired Internet - it is called “Internet” or “WAN”.

Take the provider cable and connect it to the blue WAN port: the light on the front panel of the wifi router should light up.

This means that wired Internet from the provider is successfully supplied to the router.

It is advisable to check the network settings on the computer if it will be used in the future. To do this, go to the “Start” menu, go to the “Control Panel” tab and click on the “Network and Access Center” icon

A window will open where on the left top corner There will be a tab “Change adapter settings”: click on it, select your LAN connection and go to the properties of this connection.

In the next window, you should find the “Internet Protocol version 4 (TCP/IPv4)” tab in the list of settings, go there and make sure that the “Obtain an IP address automatically” tab is checked.

Now let's move on to setting up a wifi router to connect to wired Internet.

How to connect cable Internet through a router: setting up a router

Launch an Internet browser and enter the IP address of your router in the address bar (depending on the model, IP addresses may vary, but mostly it is 192.168.0.1, less often 192.168.1.1).

If everything is done correctly, an authorization window will appear.

Now you need to enter your login and password to enter the router settings (in standard configurations this is the word “admin”, which is entered in both fields).

Go to the “Quick Settings” tab and click the “Next” button

You have several options for connecting to the Internet:

Let's take a closer look at this point:

  • - Auto-detection - as the name suggests, this connection automatically configures your router and is often used when there are no settings from the provider.
  • - PPPoE – when you select this item, it will open additional window, where you should enter the password and login provided by your Internet provider.

PPTP/Russia/PPTP – almost identical to the previous connection option, except for specifying the type of IP address

  • - Dynamic IP address – each time the client connects to the Internet, the client receives a new IP address from the range specified by the provider.
  • - Static IP address – a permanent address used to connect to the Internet.

I have wired internet, how do I connect wifi?

Now you need to set up a Wi-Fi connection. To do this, go to the next tab and in the “Wireless Mode” field, set the marker to “Enable”.

In the “Wireless network name” field, enter the name you like best, check the “WPA, Personal WPA2” box (this is the choice of protecting your Wi-Fi connections) and enter .