How to paint wheels at your dacha. DIY flower garden, how to make flower beds from tires

The desire to ennoble country cottage area, transforming it into an attractive cozy corner For comfortable rest, quite natural. Flower arrangements, beloved by many gardeners, are an invariably popular element of landscape design in suburban areas. A worthy setting for such compositions is often flower beds made from tires, which are one of the easiest products to create and practical to use. Of course, you can purchase ready-made flowerpots in specialized stores. But flower beds made from tires with your own hands are not only beautiful and functional element design, which gives the design of the site exclusivity and uniqueness, is, first of all, the pride of every summer resident.

How to choose the right tire?

It's great when it's possible to have a choice. Choosing between old tires domestic manufacturer and imported products, preference should be given to the latter. Imported waste tires have softer and thinner rubber, which is much easier to work with. If you choose between “summer” and “winter” tires, then the winter version is more suitable for work.

Deciding to create original flower beds from tires with your own hands, turning old waste tires into street vases fancy shapes, it is necessary to prepare the source material in advance and think about its design

In order to make a flowerbed from an old tire, it is advisable to choose wheels with maximum tread wear. The worn-out tread layer makes the product softer and makes it much easier to turn it inside out.

Tires contaminated with soil and sand must be cleaned. And the point is not even that it is more pleasant to work with a clean product. It’s just that when working with dirty tires, the blade of the knife and file becomes dull much faster.

Step-by-step manufacturing example

Before you start making a flowerbed from a tire, you need to think about what the finished product will look like: a bowl with smooth edges, a flowerpot with a wavy cut line, or a flowerbed in the shape big flower, bordered with petals or fringe.

The drawing, along the contour of which the cutting line will be drawn, is applied to the side of the product

When thinking about the shape of the cut, you need to be guided by the fact that the result should be a design based on the “pan-lid” principle: a deep lower part and a cut off upper part. The contour can be easily drawn along the entire circumference with a felt-tip pen or chalk.

The cut edges, made with wavy lines or shaped like teeth and fringe, look interesting.

Stage #2 – cutting along the contour

When thinking about how to make a flowerbed from an old wheel, designed in the shape of a large flower, you need to cut out petals along the edge of the product. The size of each petal should not exceed 10-12 cm. Otherwise, when turning the tire out in these places, the rubber simply will not bend, and the flowerbed will not take an even round shape.

You can use a shoe knife to cut the wheel. A well-honed tool will significantly speed up your work

You can make the cutting process easier by using liquid soap for lubricating the knife blade.

It's great if you have a jigsaw on hand. Using a jigsaw, it is convenient and quick to perform figured cutting.

Labor mechanization is described in detail in the video:

After cutting the tire along the contour, along the tread grooves it is necessary to make longitudinal cuts at a distance of 5-10 cm.

Stage #3 - turning the tire out

When creating a flowerbed on a leg out of wheels with your own hands, the first thing you need to do is turn the rubber tire inside out. For many craftsmen, this stage of work becomes a real stumbling block. The process of turning out the rubber itself is quite a labor-intensive process.

In order to cut the metal cord, you need to use a grinder to make several cuts along the outside. Cut through the rubber smoothly. The contact of the disk with the cord can be judged by the plaque formed on the surface of the product and the white smoke emitted. Make the cuts at an equidistant distance of 15-20 cm.

After spending preparatory work, you can start turning the tire out. Before you start turning the tire for your flower bed inside out, we would like to tell you one secret: it is enough to turn at least a small piece of the tire inside out, and the work will go like clockwork.

The turning process is clearly shown in the video:

The flowerbed made from old wheels is ready, you can start decorating it.

Finished product design

Creating and growing flower beds in black forms is not entirely aesthetically pleasing. Therefore, once the flowerbed has been given the desired shape, you can begin to decorate it. Until the outer surface of the inverted flowerpot is covered with a layer of dust, it is advisable to paint it.

Painting is the easiest and most affordable way to decorate a black rubber flower bed

Oil, enamel and nitro paints are excellent for painting rubber products. The paint lays on a clean rubber surface in an even layer and adheres fairly well. long term. You can also use leftover car paint to paint your flower bed. Using an aerosol can, the job can be completed in just a few minutes.

Use in flowerbed design light colors paints will prevent overheating of the earth inside the container.

The combination of colors looks interesting when the base of the flowerbed is decorated in one color, and the cloves or petals are in another.

Most craftsmen paint a rubber flowerbed only with outside. But still, to give the capacity more attractive looking, it is advisable to slightly grab the upper part of the inner surface of the product.

When designing a flowerbed, you can give complete freedom to your imagination. Glass aquarium pebbles glued to the petals of a flower bed will create the illusion of dew drops.

If you want to further decorate the flowerbed, you can apply an ornament of a different color over a plain layer of paint. But you shouldn’t be too zealous: if the flowers grow wildly, the flowerbed pattern may be completely obscured by hanging or creeping plants.

Minimum costs, a little free time - and a chic decoration for the arrangement suburban area ready

Such a flower bed will be a worthy addition to the interior and an element of the landscape design of the dacha. All that remains is to fill the container with a layer of soil and plant your favorite flowers.

Modern landscape design is characterized by original and bold decisions. These include original flower beds made with your own hands from tires, which look very attractive and do not take up much space. The desire to decorate your site and create interesting flower arrangements is quite natural, and a unique installation is also a source of pride for the creator.

Flower beds made from tires - simple and tasteful

You don't have to be a professional to create flower beds from tires. upper class. First, they decide on the location of the future composition and make a sketch of the structure. On small area It is appropriate to arrange a single form in the form of a cute frog, a graceful swan, a fairy-tale carriage or a bright parrot, as in the photographs of flower beds below.

A spacious lawn requires larger installations. For example, multi-tiered flower beds made from car tires or vertical volumetric structures as in the following photos.

Flowerbeds can come in a variety of shapes:

• Low and high.
• Round and oval.
• Multi-tiered.
• In the form of animal figures, objects and flowers.

After the location and shape have been decided, materials and tools are prepared. For work, in addition to tires, a sharp knife and paint, the following may be useful:

• Stones of different sizes.
• Metal grid.
• Technical marble.
• Leftovers building materials.
• Decorative stone for aquarium, etc.

When everything is ready, you can start working.

Making flower beds from tires

The simplest is the flower shape. The higher the tire, the larger it will be. Before you make a flower bed out of a tire, you need to choose a tire. It is better to take a used imported product with softer and thinner “winter” tires. It's easier to work with her. The tire is first cleaned, washed and dried. Then the lines of the future petals are drawn in a contrasting color, the upper part is cut out and removed, as in the photo of the flower beds below.

For further decoration, enamel, oil or nitro paint is used. On a clean and dry rubber surface they are distributed evenly and last a long time. You can also use tires to paint flower beds. car paint or aerosol can. It's better to choose the color light shades so that the roots of future plants do not overheat. The design of pure white tires looks very elegant.

Or a multi-tiered flowerbed of tires decorated with light stones of different sizes.

The combination of different colors looks interesting.

Or, conversely, a monochromatic composition.

When painting tires, you need to slightly capture the upper part of the surface from the inside to give a more aesthetic appearance.

Before painting, you need to carefully consider how the tires with blossoming plants will look. If the flowers are supposed to be bright and contrasting, then the tire should be monochromatic and modest. And, conversely, with an intricately shaped flower bed, the flowers are planted small and low.

A flowerpot will look interesting when the color of the plants echoes the shades of the container. If desired, you can glue glass aquarium pebbles to the flowerbed in the shape of a flower. oval shape– they will create the illusion of dew.

Multi-tiered flower bed

This installation will require several tires of different or the same diameter. The middle is cut out of them to make rings and the structure is assembled:

• Install the largest tire first.
• The bottom is lined with sand and crushed stone. Fertile soil is poured on top.
• A smaller tire with the same filling is centered on top.
• The number of tiers depends on the size of the elements.
• Flowers or useful plants(strawberries) are planted in the gaps formed between the rings.

Flowerbed - tire swan

An ordinary tire, painted in White color, can become a real masterpiece. For a swan figurine from it inner part is not cut out so that its weight can hold its shape.

30-40 mm are retreated from the edge of the tread and two rounded cuts are made parallel to the circle on opposite sides on two-thirds of the entire surface. The narrow middle part will make the neck, and the wide side parts will make the wings. The middle part is cut off on one side and a head is formed at its end. Then the tire is turned out and the wings appear. They are finished with cuts of varying lengths that imitate feathers. The wings can be bent in any way - the angle of inclination can be any. All that remains is to paint the bird white, let it dry and you can plant flowers, for example, forget-me-nots.

Video on how to properly cut a tire for a flower bed

To decorate your site with beautiful flower arrangements, it is not at all necessary to buy expensive street flowerpots. You can make a unique frame for flowers of various shades and shapes with your own hands. We decorate the dacha with flowerbeds made of tires: interesting ideas and options for making flowerpots will help make your garden plot unique and inimitable.

Features and Benefits

By making a flowerbed from a tire, you can implement almost any creative idea. Make one like this a budget option Framing flowers on the site is quite simple - you just need to show a little imagination and make a little effort. Flowerbeds made from tires have a number of advantages:

• tires are durable;
• tires tolerate temperature changes well;
• Almost any paint fits well on the rubber surface;
• no need to spend money on materials: old tire Almost everyone has one;
• You can use improvised items as decorative elements.

Due to the fact that rubber is a fairly pliable material, the tire can be given a wide variety of shapes. The product can be painted in absolutely any color. Such a product can be used not only as a decorative element, but also as a functional attribute of the site. For example, small seedlings can be planted in such flowerbeds.

Design

You can make a flower garden according to ready-made examples, or using your own original ideas. To complement finished design You can use any available materials: it all depends on your imagination and skill. The process of creating a flowerpot is often not completed after cutting and painting the tire. A product of complex shape in the form of an intricate figure must be supplemented with decorative elements. When decorating a flower garden you may need the following materials:

• decorative and natural stones;
• construction metal grid;
• plastic bottles;
• remains of various building materials;
• colored glass.

From several flower beds you can form bright compositions. The combination of multi-level flower beds looks more impressive various forms . A popular option is a composition of flower beds in the shape of cups and a teapot. To decorate it, you don’t have to turn the tire inside out and cut out patterns on it. It is enough just to arrange several tires of different sizes, form handles from pieces of rubber and paint the finished products.

Unusual

In the nursery play area Flower beds in the shape of animals or fairy-tale characters would be appropriate. You can make a turtle from a tire and tread:

• the tread must be cut into four equal parts;
• in the tire you need to make 4 cuts under the turtle’s paws;
• Pieces of tread are inserted into the holes and secured with staples.
• the tail is made from a small piece of rubber, secured with wire staples;
• The turtle's neck can be made from a polymer pipe.
• A head made of crumpled paper is attached to the neck using tape.
• All structural elements are painted in appropriate shades.

Other materials can be used to make the turtle's head, neck, paws and tail. The product can be decorated additional items(for example, put a small hat on the turtle’s head and glasses on his nose).

Flower

Near the house, flower-shaped flower beds will look good. Before you start making such a flowerpot, you need to decide on the shape of the petals. Petals can be in the shape of a triangle, semicircle, rectangle or wavy. Sometimes they are narrow at the base and wide at the edges.

The outline of the petals is drawn on the outer surface of the tire. To apply markings, you can use chalk or a felt-tip pen. Using a shoe knife or jigsaw, cut out the petals. If the rubber is quite dense, and in quality cutting tool a knife will be used; during the cutting process, it is recommended to periodically dip the blade in soapy water.

Holding the edges of the cuts, you need to carefully turn the tire inside out. Ready product needs to be painted. Flower-shaped flower beds look more attractive if you use different shades of the color palette when painting them.

On a leg

From a solid wheel (tire with disk) you can make a magnificent flowerpot on a leg.

The workflow for creating such a flower bed consists of the following steps:

• in the tire, reaching the tread with the cutting tool, petals of the desired shape are cut out;
• then turn out the top and bottom parts of the tire (there is no need to take out the disk - it will be the leg of the flowerpot);
• the upper part is painted in rich colors, the lower part will look like a stem if it is painted green.

Swan

One of the most common options for flower beds made from tires is a product in the shape of a swan. Such a flowerbed is made in the same way as a flowerpot in the shape of a flower. The only difference will be more complex cutting. You can use a ready-made diagram that shows the lines of the wings, tail, neck and head of a swan for drawing on the tire.

After applying the markings to the tire, the swan shape itself is cut out. Next, you need to turn out the tire and complete the formation of the swan. The beak can be made of rubber or any other comfortable material, paint it with orange paint and attach it to the head using self-tapping screws. The swan's eyes can be made from pieces of electrical tape.

Usually the figure is painted white, but no one forbids using other shades (you can make multi-colored plumage).

See below for a master class on making a swan from tires.

Required Tools

To start making a flowerbed from tires, you need to prepare necessary tools. First of all, this is a tool that will be used for cutting rubber (knife, electric jigsaw, grinder). If you decide to use a knife, the blade must be sharpened well. It is worth considering that cutting thick rubber with a knife is quite problematic. To make your work easier, The blade must be lubricated with grease before cutting. If the knife will not be used as the main tool for cutting the tire, it can be useful for making small cuts.

Use as a cutting tool electric jigsaw will be the most the best option. The more powerful the jigsaw, the easier it is to cut the wheel. For cutting tires ideal option there will be a blade made of high quality steel with a reverse tooth. Cutting a tire with a grinder is much easier than with a knife or jigsaw. The disadvantage of this tool is that the rubber along the edges of the cut will melt, and the cutting procedure will be accompanied by an unpleasant, pungent odor.

If you need to cut the protector to make a flowerpot, it is better to do it with a grinder.

Then you need to decide on the type of paint for the flowerbed. Almost any paint fits well on rubber. The following types are mainly used:

• aerosol;
• enamel on oil based;
• nitroenamel;
• auto enamel.

If necessary, to paint the tire, you need to prepare a brush. For work you will need gloves; they will protect your hands from paint or other possible contaminants.. To apply the markings you will need chalk, marker or soap. During production complex figures some elements will have to be made from scrap materials. To fasten additional parts to the main tire figure, you will need staples and screws.

How to do it?

Making complex shaped flower beds from tires is a labor-intensive process that requires patience and some physical effort. Whatever shape you want to give to a flowerbed made of tires, the procedure for making a flowerpot will always be almost the same. Here step-by-step instruction, according to which you can independently make a figured flowerbed from tires:

• Choosing a tire. To ensure that working with tires does not cause unnecessary trouble, you need to take tires that can be easily trimmed (old, heavily worn, thin winter or imported).
• Thoroughly clean and dry the tire.
• Deciding on the form. It is necessary to mark the cutting line with chalk or a marker. The marks on the tire must be made as carefully as possible to facilitate the process of cutting out the figure in the future.
• Cut along the drawn line, then remove the top part. You can use a high-power jigsaw.
• Turn the tire inside out (you need to grab the cut edge with your hands, first step on the middle of the tire and forcefully pull the rubber towards you).
• We sand the cut edges and treat them with gasoline.
• At the end, the flowerbed should be painted, dried well and, if necessary, decorated with additional elements.

View

All flowerpots made from tires can be divided into two main types: solid and cut. The most simple option The flowerbed of tires is a tire in its original form. Ennoble appearance You can make such a flowerpot using paints. Such flower beds can be placed in small groups, or they can be made into a multi-level structure.

A multi-level design will look more attractive if you give it the shape of a pyramid. To do this, you need to take tires of different diameters and install them on top of each other. The difference in tire diameter should be at least 20 cm. Hanging flower beds will be a more interesting solution. A hanging flower bed can be placed along a wall or a blind fence. The shape of such a flower bed can be very diverse.

The inner space of the tire must be filled with soil. A mixture of small stones and sand can be used as drainage. When making a hanging flower bed, you need to make several small holes in the tire so that excess moisture can drain freely. Flower beds in the shape of plants, animals or mythical creatures more labor-intensive, but look quite impressive.

With the help of a tire and a cutting tool, you can realize any original idea.

In addition to the division into two main types, there is an additional classification of flowerpots made from tires. Flowerbeds are divided by size and shape as follows:

• tall;
• low;
• single-tier;
• multi-tiered;
• curly;
• round.

Material

The ease of making the flower bed, as well as its appearance, will depend on the material chosen. When choosing tires, you need to consider the following features::

• the process of making a flower bed will be easier from old tires, worn rubber is more pliable;
• imported tires are thinner than domestic ones and are easier to cut;
• winter tires are more flexible than summer tires;
• Tires with metal cords are more difficult to cut;
• If, when making a flowerpot, it is necessary to turn the rubber inside out, you need to select a tire with the most worn tread.

A flower bed can be made from rims or solid (rims with tires) car wheels. This material is used much less frequently than conventional tires, but flowerpots made from wheels look no less attractive. Whatever material you choose to make a flower bed, it must be thoroughly washed to remove dirt. This can be done using a garden hose.

Pure material will facilitate the process of making a flowerpot and will not damage cutting tools.

In addition to the basic rules for making a flower bed from tires, it is important to know some of the subtleties of its placement on the site. It is better to place the flower bed in a well-lit and relatively flat area. On large areas, multi-tiered structures will look better. Having decided on the location, it is necessary to make a container from boards or other solid material for the base of the flowerbed.

It is important to prepare good soil for flowers. Soil mixture It should not be too greasy so that moisture easily passes to the roots of the plants. It is important not to forget about the drainage layer, which can be made from expanded clay or gravel. To retain moisture in the soil and make it easier to care for plants, the area around the flowerpot should be sprinkled with gravel or sand.

It is better to paint the wheels in light colors: this will avoid overheating of the soil in summer period. When painting you should also consider the following:

• Before painting, the tire must be thoroughly cleaned, dried and degreased. You can treat rubber from grease contaminants with solvent, gasoline or acetone.
• It is advisable to paint the tire in several layers. Thin layer paint can quickly wear off or crack. You should not apply many layers, this will lead to rapid peeling of the paint. It would be optimal to paint the product two or three times.
• If you want to plant bright flowers in a flowerbed, it is better to paint the tire in delicate colors. bright hues. It is better to plant light, small flowers in flowerpots of bright colors.
• It is acceptable for the shade of the flowers to echo the color of the flower bed.
• It’s worth painting a flowerbed not only with outside. If you paint the inner edges, the flowerbed will look more voluminous.
• The flowerpot does not have to be painted in a single color; interesting patterns of a different color can be applied to the tire.

To apply the pattern, you can use pre-made cardboard stencils.

“What paint should I paint the tires for the flower bed?” - one of those questions that inevitably arise when creating a flower garden from tires. Decorating your own backyard or garden plot is one of the main tasks facing the owner of the house. At the same time, each of us selects the style and placement of various elements based on individual preferences and our own capabilities. IN Lately Due to the worsening economic situation in the country, decorating and creating elements with your own hands is gaining particular popularity. One such solution is to create a flower garden from improvised materials. This process contains many nuances and more more questions requiring an answer.

Creating your own flower garden is quite a complex and time-consuming task. At the same time, it requires from us good knowledge of the matter and the manifestation of extraordinary talent, which is the basis of future construction. Any construction, be it a residential building or an ordinary flower bed, requires significant elaboration of all the details and the creation of a plan for future work. Of course you can buy ready-made option flower beds and not have to worry about creating them and decorative finishing. However, such a solution requires significant financial costs, and this may not always be advisable, especially in the conditions of modern reality. Based on this, the best option is to create a similar object with your own hands.

When making such a decision, the question inevitably arises of what material to choose for the work. The answer to this is quite simple, since absolutely any waste material, available, is quite capable of succinctly integrating into such a building. Wooden beam, metal sheets, plastic bottles and even car tires- all these materials can harmoniously fit into the project of creating a flower garden and serve as its basis. Wherein Special attention should be given to the use of car tires, since they are ideal material to create an impromptu flower garden, which allows not only to significantly save money, but also to achieve excellent visual characteristics of the object.

The process of creating a flower bed using a car tire is quite simple, but its decorative design requires a responsible approach. After all, the visual perception of the object depends to the greatest extent on the external characteristics of the flower garden and the plants inhabiting it. Giving the aesthetic appearance of a similar building can be done both by painting the materials underlying the flower bed, and by cutting out various figures and images from the surface of the products. Each of these options is sufficient good decision, and all of them can be used both in combination and separately. The resulting images will significantly diversify the garden, as well as give it individuality.

Progress of painting the flower garden

Choosing the main coloring agent is a fairly important task, giving you the opportunity to experiment with the shades of the object and select their optimal combinations. However, painting tires is not that difficult. To implement such a solution, it is enough to produce only a few simple actions, which will allow you to give finished building uniqueness. In addition, carrying out similar work requires minimum quantity materials:

• solvent;
• primer;
• dye;
• set of brushes.

This small set is sufficient; it allows you to completely paint all the necessary details of the future flower bed. At the same time, processing the material itself with paint requires adherence to a certain sequence, which makes it possible to obtain a high-quality surface characterized by a long service life and excellent appearance. The sequence of processing each tire separately is presented below:

1. 1 First, the product must be completely free of dirt: its surface must be clean and free from the slightest particles of any contaminants.
2. 2 The next step is degreasing the surface. To do this, use a solvent or any similar product (white spirit or acetone). This step allows for additional cleaning of the material and helps the paint adhere better to it.
3. 3 The use of a primer is not prerequisite. However, its application promotes better fixation. coloring matter on a rubber surface. The result of its use is that the painted product will retain its original appearance for a long time, without deforming or cracking.
4. 4 The direct process of applying paint to a tire is quite simple. However, to create drawings you will need brushes various sizes and shapes, but a monolithic coating can be created using only one brush in the shortest possible time.

As can be seen from the above sequence, carrying out work on painting a flower garden is not particularly difficult; the right approach All manipulations can be completed in just a few hours. It won't take much time to create a flower bed.

Material options and their properties

Schemes for creating flower beds can be varied. For example, one of the most common wheel placement options is a slide. It is this arrangement that makes it possible to obtain optimal external characteristics flower garden and make it incredibly practical. In addition, the slide involves the use of a wide range of colors, which makes this arrangement one of the brightest and most colorful among similar configurations.

The choice of paint to cover the surface is an important and responsible decision, since the visual characteristics of the finished object largely depend on it.

Today, there are several types of materials that can be used to paint a structure.

Among them are the following:

• aerosol;
• automobile;
• nitro paints;
• acrylic;
• water-based;
• oil

The above types of coating can be used to fully color a flower garden. Moreover, each of them has its own specific properties. Thus, aerosols have high degree penetration: they are able to penetrate even the most inaccessible places.

Automotive enamels and nitro paints allow you to achieve excellent external performance, but require special care for the treated surface. Water-based and oil-based coatings have the shortest service life compared to other options, but can also be used to paint tire beds.

Creating a flower bed with my own hands requires certain skills and creativity. One of the best options materials for the flower garden are car tires. This solution allows you to get a magnificent and colorful object, as well as save a lot. However, the use of such products involves the need for decorative processing. Not everyone can say with confidence: “I don’t paint car tires,” since the result of a similar decision will be dull images and faceless textures. It follows that to color similar material still worth it. After all, doing this is not so difficult, and the result of such work will delight everyone with its beauty and brightness for a long time.

Probably every owner of a dacha or country house at some point there is a desire to improve your site and make it unique.

But it arises logical question: How? After all, goods are sold to everyone, so where can one achieve self-expression? The solution is simple - do it yourself.

The role of flower beds in landscape design

One way to add personality to a site is to install flower beds. Flowers enhance the landscape. And the more original, the more attention she attracts.

One of the ideas for creating a flower garden at the dacha is do-it-yourself flower beds made from tires.

Rubber is malleable enough to be molded into different shapes.

It can be painted or decorated with other materials, creating a real masterpiece. The flowerbeds themselves are made from tires - original idea, and if you use your imagination, you won’t be able to take your eyes off your site.

Tires are often thrown into landfills, causing unnecessary pollution. environment. Be original, find a more worthy use for them.

You don’t even have to buy tires: ask your neighbors, look at home. Someone just has to have a couple of them lying around.

In addition to the fact that DIY tire flowerbeds can be decorative element, you can plant small seedlings in them: strawberries, for example.

Advantages and disadvantages of using tires

The most important advantage of this element country decor is, of course, originality.

But he's not the only one. Tire flowerbeds:

• easy to manufacture;
• can be painted in bright and rich colors;
• will take the form you want;
• free if you have used tires;
• attractive.

Among the disadvantages of such flower beds, one can highlight only the fact that not everyone likes them. Some people want something simple and more elegant, while others don’t want to spend time making them.

The original instructions with photos and video materials in the article will help give the flowerbed a complete look.

IN landscape design mountain pine occupies a special place. What varieties of shrubs are used in our latitudes and what does this plant need?

Types of flower beds made from tires

Depending on your desire, you can create different types flower beds

Simple and angry

The simplest, but nevertheless attractive option is a flower bed made of tires in its original form.

Just throw soil inside and plant flowers. You can paint the tire to make it more attractive to look at.

Install several of these flower beds in the order you like on the same level, or build a multi-level structure out of them - and your lawn will become much more attractive.

If you like the idea of ​​a multi-level flower bed, take tires of different diameters and place them on top of each other, covering each one with soil.

You can do it original pyramid, on the tiers of which you can plant various flowers, decorate it with pebbles and other details. It looks beautiful, doesn’t take much time – what more could you ask for?

Hanging flower beds

Hanging tire flower beds can be made using a rope or chain attached to a tree. For such a flower bed, you will have to cover the bottom of the tire with a flower pot or other suitable material.

The forms can be very different. For example, using two tires and a piece of pipe you can make a flowerbed-cup, flowerbed-bag, etc. Children will love the lawn, just like in their favorite fairy tales.

Let your imagination run wild

If you want to distinguish yourself even more, tire cutting is just for you. Flowers, swans, dragons and other representatives of flora and fauna.

You will need a shoe knife, a tire and a little imagination.

What do beginners need to know?

You don't need to be a master carver to create an amazing and colorful DIY tire flower bed. To do this, you just need to know a few details.

Flowerbeds can be:

• low;
• tall;
• round;
• curly;
• single-tier;
• multi-tiered.

The materials for making a flower bed are:

• tires;
• sharp knife;
• paints;
• stones, small and large;
• metal grid;
• leftover building materials;
• decorative stones and figurines.

First you need to know that the larger the site, the more massive the structure should be. Multi-tiered flower beds or a large number of small flower beds.

The simplest of the carved flower beds is the shape of a flower. It is easier to cut on soft rubber, especially on imported winter tires. It is thinner, therefore, it is also easier to turn it inside out. Believe me, this is very important.

Before starting work, the tire must be cleaned of dirt and dust, washed and dried thoroughly.

In order not to get lost in the shape of the petals, simply draw them and cut along the contour.

By the way, touch when painting inner side so as not to disturb the aesthetics. Think in advance about how the color of the flowerbed will match the plants inside it. The more complex the form and brighter color flower beds, the more modest and lower the flowers should be, and vice versa.

Manufacturing step by step

So, how to make a flowerbed from a tire with your own hands:

1. First you need to choose a tire. It should be made of soft rubber. Be sure to check the availability of the disk so that you can create a full-fledged flower bed. Tires without rims are also suitable: for example, if you want a tall flower bed of several tires, a regular “cylinder”.
2. Think of the future shape and draw a cut line with chalk. Flower petals, simple circles and jagged edges. You can even cut the tire straight. The main thing is to come up with something that you like.
3. Cut strictly along the marked line. Do not remove the disc. Once everything is ready, set the top aside, turn the tire over, step on it and pull it up, turning the edges out from under your feet. The most difficult thing is to cope with the first piece, then it will be easier. This is a rather labor-intensive process that requires brute force and patience. It will not be easy for girls to cope with this.
4. Turn the tire over and bury it in the ground. You will get a beautiful glass. Upper part You can cut it inside and attach it to the main structure, or you can just throw it away. The advice to bury the tire is not in vain: if there are children in the house, they can destroy your many hours of work while playing.
5. Decoration. This is where your imagination can run wild. Paint one color or draw whatever your heart desires. Fence paint is perfect for this purpose. You can attach pebbles, glass or other decorative elements on top of the paint. You can lay out patterns, or you can completely cover the surface of the tire with improvised elements.
6. For greater effect, if you have small plants growing in your flower garden, decorate visible areas of the earth with pebbles, figurines of gnomes, castles. You can create a fabulous composition from anything that comes to hand.

The video shows how to make a simple flower bed from tires.

You can see what finished flower beds made with your own hands from wheel tires look like in the photo gallery.

As you can see, there is nothing complicated about creating flower beds from tires. This could become fun entertainment for you and your children, a way to express yourself and develop imagination.

And if someone has artistic talent at home, this is the perfect place to use it.

The most time-consuming part of the process is being able to turn the tire out. But if you don’t want to suffer, you can do something simpler. By the way, flower beds are not the only thing for which old car wheels are useful in the country.

Be creative, have fun decorating your site and surprise your neighbors!