Buy silicone pipe 50 mm. Rubber pipes for engine radiator cooling and interior heating systems

Universal pipe made of multi-layer, high-quality reinforced silicone, provides high performance even under the most severe temperature overloads. Withstands high pressure and is not afraid of aggressive environments. It has long term services, unlike rubber pipes. Can be used anywhere in the vehicle cooling system.

Despite the presence of 3-layer reinforcement, it is permissible to stretch the pipe up to 4 mm in diameter when installing it on custom size details. If there is no suitable nozzle size for the part, then you should choose a similar silicone nozzle size, downward.

On a note:
Most cars, regardless of the country of production and the manufacturer itself, are released from factories with rubber pipes and hoses. The suitability of rubber products used by many manufacturers leaves much to be desired. This is due to the fact that rubber, even under excellent operating conditions, quickly becomes outdated and wears out, as a result of which it breaks and hardens. You should worry in advance about the impending disaster and warn yourself against all negative impacts this aspect. All rubber products will not tolerate temperature changes. That is why they should be changed very often if the car is operated in cold seasons. If a motorist wants to protect himself at all, he should purchase silicone pipes, with which life will become much easier. Such devices have fairly low wear, as a result of which they are long-lived and can last for more than one year. That is why many motorists have chosen silicone-type pipes, which have many different advantages over their global counterparts, which are gradually leaving the automotive market.

What are silicone pipes?
Silicone hoses and pipes are a very important attribute when assembling all turbocharged engines, both on domestic ones vehicles, and on foreign cars. It is important to note that this kind of silicone has many advantages, as a result of which they have achieved wide popularity among domestic consumers.

Firstly, such devices have a reinforced structure, which will allow them to withstand very high pressure, and the expansion of the pipe itself at such excess pressure will be minimized. It is in this way that it will be possible to further smooth out the “turbo lag” or “turbo lag”, as a result of which the time before boost occurs will be reduced. In addition, the use of such pipes will make it very easy to connect different pipes and parts of parts among themselves. It is the silicone pipes that will play the role of irreplaceable elements, since they are the most versatile and durable parts of their kind, through which maximum and effective work the entire cooling system of the vehicle.

Role silicone pipes.
It is important to note that silicone pipes will play the role of the main connecting elements car cooling systems. They will also serve as channels for distributing coolant. Their location will not matter at all - between the radiator and the pump, between the engine and the thermostat, since they necessarily have an increased level of wear resistance. In addition, they are not afraid of a terrible aggressive environment and various kinds substances.

Please note that you only need to purchase silicone pipes that are very similar to their previous factory parts, this will guarantee the most normalized operation of the entire cooling system.

Suitable clamp:
Power clamp 67-75 mm (T-bolt, stainless steel)

Matching diameter aluminum pipes:

Universal pipe made of multi-layer, high-quality reinforced silicone, provides high performance even under the most severe temperature overloads. Withstands high pressure and is not afraid of aggressive environments. Has a long service life, unlike rubber pipes. Can be used anywhere in the vehicle cooling system.

Despite the presence of 3-layer reinforcement, it is permissible to stretch the pipe up to 4 mm in diameter when installing it on a non-standard part size. If there is no suitable nozzle size for the part, then you should choose a similar silicone nozzle size, downward.

On a note:
Most cars, regardless of the country of production and the manufacturer itself, are released from factories with rubber pipes and hoses. The suitability of rubber products used by many manufacturers leaves much to be desired. This is due to the fact that rubber, even under excellent operating conditions, quickly becomes outdated and wears out, as a result of which it breaks and hardens. You should worry in advance about the impending disaster and warn yourself against all the negative impacts of this aspect. All rubber products will not tolerate temperature changes. That is why they should be changed very often if the car is operated in cold seasons. If a motorist wants to protect himself at all, he should purchase silicone pipes, with which life will become much easier. Such devices have fairly low wear, as a result of which they are long-lived and can last for more than one year. That is why many motorists have chosen silicone-type pipes, which have many different advantages over their global counterparts, which are gradually leaving the automotive market.

What are silicone pipes?
Silicone hoses and pipes are a very important attribute when assembling all turbocharged engines on both domestic vehicles and foreign cars. It is important to note that this kind of silicone has many advantages, as a result of which they have achieved wide popularity among domestic consumers.

Firstly, such devices have a reinforced structure, which will allow them to withstand very high pressure, and the expansion of the pipe itself at such excess pressure will be minimized. It is in this way that it will be possible to further smooth out the “turbo lag” or “turbo lag”, as a result of which the time before boost occurs will be reduced. In addition, the use of such pipes will make it very easy to connect different pipes and parts of parts to each other. It is the silicone pipes that will play the role of irreplaceable elements, since they are the most versatile and durable parts of their kind, through which the maximum and efficient operation of the entire cooling system of the car will be ensured.

The role of silicone pipes.
It is important to note that silicone pipes will play the role of the main connecting elements of the car's cooling system. They will also serve as channels for distributing coolant. Their location will not matter at all - between the radiator and the pump, between the engine and the thermostat, since they necessarily have an increased level of wear resistance. In addition, they are not afraid of terrible aggressive environments and various kinds of substances.

Please note that you only need to purchase silicone pipes that are very similar to their previous factory parts, this will guarantee the most normalized operation of the entire cooling system.

A pipe is a small part of a pipe that is connected to a tank or other structure. These products are used to connect them to fittings or pipelines that discharge liquid, steam or gas. The pipes connect the components of the engine compartments, cooling, heating systems, as well as other equipment. They perform connecting and shock-absorbing functions.

One of the activities of the Penta Junior company is the production of silicone pipes of various sizes. The products are made from high quality silicone reinforced with several layers of polyester fiber.

Advantages of silicone pipes

• Maintaining the geometry of the product during multiple temperature changes.
• Elasticity, ensuring a tight and uniform fit of parts to clamps and connecting surfaces. Over time, the material does not harden, it does not crack, the tightness of the product and the connection is maintained, working fluid does not leak, no air enters the system.
• Durability – the service life of silicone parts is longer than similar rubber products, which harden and break after a few years. This reduces operating costs.
• Strength, high wear resistance, due to the peculiarities of the production process, during which silicone penetrates into the reinforcing fabric.
• Resistance to solar radiation, aggressive chemicals, coolants, antifreeze, ozone and other gases, oil vapors.
• Easy to install and replace.

Features of silicone pipes

• Maintains performance over a wide temperature range, from –60 to +250 °C.
• Resistance to vacuum and high pressure, and at excess pressure the expansion of the pipe itself is minimal.
• A variety of sizes, bending angles, wall thicknesses and transitions to different diameters makes it possible to lay air lines of complex configurations.

Types of pipes:

• straight;
• corner;
• transitional;
• damper

When choosing silicone pipes, you should take into account the operating parameters, first of all, pressure, take into account the shape of the products and the quality of the clamps.

Silicone pipe: size table

You can also order the production of silicone pipes according to individual sizes.

Silicone pipe: purpose

These products are indispensable in the automotive industry, in the production of ventilation and cleaning systems, as well as in other areas.

The Rezinoplast enterprise produces various rubber pipes for the cooling system (pipes, sleeves, hoses, cuffs, seals, rings, gaskets) that comply with international standards, as well as according to customer drawings or samples. The company has extensive experience in designing and manufacturing molds for the production of rubber goods.

Rubber pipes for cooling systems are short tubes that serve as outlets from the main tank or pipeline, and also act as a connecting part in the cooling systems of engines of agricultural machinery, special equipment, trucks and passenger cars. Depending on the connection and type adopted, the cooling system pipe at the end is equipped with a thread, socket or flange.

In 2013, an extrusion line made in Korea was purchased and put into operation; industrial hoses, reinforced, were put into production textile thread, withstanding pressure up to 20 bar, automotive and tractor cooling system pipes, profiles of various designs.

Extrusion line for the production of pipes, sleeves, hoses and profiles.

The design department of the Rezinoplast company works in close cooperation with production, whose specialists can quickly create a design of a molding tool that fully complies with the assigned tasks and standards, and develop a technology for producing the desired product.

The production capacity of the enterprise allows us to produce up to 7 km. oxygen hose diameter 9mm. per day. The reinforcement produced is of two types: strapping and braiding, making it possible to produce reinforced rubber pipes that distinguish highest quality, wear resistance and durability.

The line allows the production of gas welding, watering, pressure hoses, rubber pipes, diameter from 6 to 80 mm and is equipped with a system for automatically measuring the inner and outer diameters of the hose, which makes it possible to control its dimension and geometry at the production stage. Rezinoplast produces a range of pipes intended primarily for use in cars and agricultural machinery for supplying coolant.

Rezinoplast produces a range of pipes intended primarily for use in cars and agricultural machinery for supplying coolant. The multilayer structure of which has higher oil, thermal and wear resistance. The product is resistant to glycol and non-aggressive chemicals. Withstands temporary temperatures up to +120°C. Products in an autoclave are treated with steam at a temperature of 160 degrees and a pressure of 6 atmospheres.

Our company produces profiles of round, rectangular and complex sections.

High professional level specialists of the enterprise, the use of high-quality raw materials allows us to produce a product that can compete with European manufacturers.

Quality control of rubber goods is carried out by the product quality department at all stages: when purchasing raw materials, preparing rubber compounds, after manufacturing products. The quality is checked by the company’s laboratory, equipped with specialized equipment.

Rezinoplast manufactures cooling system pipes for the Minsk Tractor Plant, Bogdan Corporation and AvtoKrAZ.