Descaler for cleaning kettles. How to quickly descale a kettle without much effort

Every housewife should know how to descale a kettle. Unfortunately, we have not yet invented enough effective ways warnings of the appearance limescale on the walls and heating element of the functional apparatus. By filtering the water, as well as regularly rinsing the container with a weak solution of soda or citric acid, you can only slightly reduce the rate of scale formation. Fortunately, there are many cleaning methods that allow you to restore the device even at home. Before you replace your old device with a new one, you should try one of them.

Causes and consequences of scale formation

Limescale deposits form equally actively in teapots of all types and designs. Only if this electrical appliance, a layer of scale mainly covers the heating element. In a stainless steel container or its enameled equivalent, sediment covers the bottom and walls to the level to which water is poured. The harder the water is used (high salt content), and the more often it is boiled, the faster the problem becomes obvious.

If you do not try to wash the container, you will very soon have to face the following consequences:

1. An electrical device can become unusable from such exposure. This is due to the fact that plaque blocks contact of the heater with water and the steel is constantly heated to prohibitive temperatures. In the end, the element simply burns out
2. The lime composition, entering the human body, begins to cause negative reactions. If you do not remove the scale in the kettle in a timely manner, you can provoke the development of a disease of the excretory system.
3. Under the influence high temperatures Chemical reactions constantly occur in the composition of scale, which causes the taste and smell of boiled water gets worse over time.

Tip: Regardless of what cleaning product was used for cleaning the kettle, after carrying out the manipulation in the container, you need to boil it at least twice clean water. Only then will it be possible to use the device for its intended purpose without the risk of spoiling the taste of the drink or causing an upset stomach.

Of course, to get rid of scale in a kettle, you can purchase special chemical products that are offered in household goods stores today. And yet, practice shows that the problem can be solved using folk remedies. Moreover, the result will be no less quality, and the risk unpleasant consequences– minimal.

Simple but effective ways to remove scale

When preparing to work with citric or acetic acid, baking soda and other popular reagents, you need to take into account the type of material from which the kettle is made. Among the most gentle options for exposure at home, approaches based on the use of such products are especially popular:

• Use of citric acid. This product can be used when working with any materials, even plastic. We dilute 1-2 teaspoons of the reagent in 1 liter of water. For larger containers the same proportions apply. Fill the kettle with the resulting solution and turn it on. The composition should be boiled no more than 1-2 times. During this time, the plaque will come off and the surfaces of the product will be renewed.

• Cleansing with Coca-Cola and other carbonated drinks. This method known to many, but not everyone follows the subtleties of the manipulation. First of all, the container with the drink must be opened so that most of gases Then fill the kettle with Coca-Cola to about halfway (traces of scale should be completely covered) and bring the contents to a boil. All that remains is to wash the walls with a soft sponge. It is worth considering that from such an impact Electric kettle may break. And to clean light-colored products, you should not use Coca-Cola or Fanta, they can stain the metal.

• Treatment with soda. The best option for processing enameled and metal containers. Simply fill the kettle with water, add a tablespoon of baking soda and bring to a boil. The mass must be boiled for another half hour, using very low heat. Then the device should be removed from the stove and cooled in a natural way. All that remains is to drain the liquid and clean the container manually. You can do no more than 3 approaches. If the procedure does not help, other treatment options are used.

• Using brine. Simple and available method. To remove scale from a kettle, you need to fill it with brine from pickled tomatoes or cucumbers and boil the contents.

• Purification based product. To remove light whitish plaque, you should use apple or pear peelings, and more dense ones, potato peelings. We put them in a container, fill them with water and boil them, then remove them from the stove (unplug them) and let them sit for two hours.

The above methods are considered the most gentle at home. But they should only be used if absolutely necessary. It’s better to just regularly wash the device inside and out with a citric acid solution (1 sachet per 1 liter of water). There is no need to boil the liquid!

Aggressive methods for removing limescale

In cases where the recipes described above do not help, you have to use more drastic methods to solve the problem. Before you descale the kettle with vinegar, it is worth considering that if it has a plastic or glass body, the consequences can be very unpredictable. It’s better not to take risks and use such approaches only when working with metal products.

• Cleaning with vinegar. For 1 liter of water, take half a glass of vinegar, pour the solution into a kettle and bring to a boil over low heat. After this, we evaluate the degree of plaque removal and, if necessary, extend the manipulation for another quarter of an hour.

• Using vinegar baking soda and citric acid. If you have run out of methods, and removing the plaque has not led to anything, you need to do the following. Alternately boil water in a kettle with soda (a tablespoon per liter), citric acid (a tablespoon per liter) and vinegar (0.5 cups per liter). The exposure time in each case is half an hour. Treating with soda, lemon juice and vinegar will at least soften the scale, allowing you to scrub it off with a sponge.

There are as many housewives as there are recipes for cleaning teapots. Some are ready to clean the product with the help of Whiteness, after which they spend a lot of time eliminating the persistent chlorine odor. The approach is, of course, effective, but can lead to permanent damage to the material.

Electric kettle - convenient device, which is often found on modern kitchens. It is made from different materials: plastics, ceramics, glass and of stainless steel. However, no matter how high-quality and high-tech it is, you will have to think about how to remove scale from an electric kettle.

The question is actually a difficult one. You need to clean an electric kettle at home very carefully, carefully choosing cleaning products: if chosen incorrectly, it can damage the heating element, and you will have to take your favorite equipment to the trash.

Scale is insoluble salts (silicates, carbonates and sulfates of calcium and magnesium) that have pores. Dangerous bacteria multiply in them. Drinking water that has been heated in a container with a thick layer of scale is very harmful to your health. In addition, heat does not pass through it well, so the water will take longer to heat up, increasing energy consumption and overloading the heating element of the kettle. This leads to rapid breakdown of the device. This is why it is important to get rid of salt deposits.

Cleaning methods

There are two ways to descale an electric kettle:

• mechanical. You will need hard sponges and brushes to scrape off the plaque. This method requires a lot of effort and time. Experts do not recommend using it because cleaning tools leave scratches on the walls of the kettle, which creates favorable conditions for the reproduction of pathogenic microorganisms in them. It is difficult to remove all the scale, especially from small elements. However, if there is nothing else at hand, then use the mechanical method;
• chemical. You need an acid and an alkali: some salts lend themselves to one substance, some to another. They are found in almost every home - acetic, citric acid and soda. The mechanism of action is simple: these products decompose scale into components that are easily washed off with water.

Chemicals such as acids and soda will help you clean the kettle efficiently and easily at home.

Now there are a lot of tips on how to remove scale. The main thing to remember is:

1. Choose your descaling agent carefully: some of them are not suitable for a particular kettle material.
2. Consider the degree of contamination. If the scale layer is thin, then you should not use boiling. Pour the required solution into the kettle and leave for several hours. If there is a significant volume of deposits, you will have to boil it, and the procedure will most likely need to be repeated.
3. Warn your loved ones about cleaning an electrical appliance so that no one is accidentally poisoned.
4. Before use chemical methods Scrub the walls of the kettle with a hard, non-metallic sponge for several minutes. Skip this tip if you have a plastic appliance (its walls can be easily scratched).
5. Do not fill the kettle completely, otherwise the water will spill out when boiling. Focus on the displacement markings of the device. Usually the permissible maximum and minimum values ​​are indicated there.
6. Once cleaning is complete, wash the kettle. Then boil it once or twice plain water and pour it out, thereby removing any remaining chemicals and odor (otherwise there is a risk of poisoning).

Removing salt deposits is not difficult. But if you need a working electric kettle for long-term use, do not allow a thick layer of scale to form.

Vinegar

You can clean the electric kettle with acetic acid, but this must be done carefully. Use 6 or 9% table vinegar. This method is used for electrical appliances made of plastic, glass and stainless steel, if inside the kettle large volume hardened scale. Use one of the recipes:

• Fill the kettle two-thirds full with water. Top up the rest with vinegar. The solution must be boiled. Leave it for several hours to allow the water to cool.
• Fill the kettle with water and vinegar in an approximate ratio of 2:1 (that is, you will need a little less than two glasses of acetic acid per liter of water). First boil the water. Then add vinegar and turn on the kettle. After turning it off, leave it for an hour.

Instead of vinegar, you can use vinegar essence 70%: one glass is replaced with 1-2 tablespoons, respectively.

Ventilate the room after using vinegar to remove the strong odor.

Lemon acid

Citric acid is a softer and more suitable way for electric kettles to remove salt deposits. With its help it is difficult to get rid of hard, old scale, but it is perfect for small stains. Another advantage of this method is its versatility: it is suitable for plastic, metal, ceramic and glass devices.

Gently pour citric acid powder into boiling water (it may hiss and splash out). Ingredient ratio: per liter - 1-2 teaspoons. The solution needs to be boiled for several minutes. Then leave it for a couple of hours.

Instead of citric acid powder, juice is sometimes added. Squeeze a quarter of a lemon into half a liter of water or simply put it in the kettle and wait until the water boils.

Soda

Scale in an electric kettle is removed with baking soda or soda ash. This is the most gentle method. It is suitable for any teapots. Use caution when using it on colored plastic items as it may leave stains.

Pour baking soda into boiling water. You will need 2 tablespoons per liter. Let the solution simmer for a few minutes, then leave for a couple of hours to cool completely.

Citric acid and soda

It is possible to effectively clean an electric kettle from plaque at home using the following procedure:

1. Pour baking soda into a kettle of water. Boil it, then leave for half an hour. Then drain.
2. Pour water into the kettle and add citric acid. Next, repeat the steps of the previous paragraph.

Special means

You don’t have to wonder which method to choose, how to use it and whether it will suit your kettle, because modern market household chemicals replete with special tools. The seller of such a store will tell you what to choose.+

Follow the instructions for using household chemicals to effectively, efficiently and safely descale your electric kettle.

There are many different recommendations on the Internet, but not all of them are suitable for electric kettles. It is not recommended to use:

• peelings (potato, apple and others);
• colored carbonated drinks. With caution, you can use colorless ones (“Sprite”, “Schweppes”). The liquid should not contain gases, so first leave the carbonated drink in an open container for several hours. Then pour it into an electric kettle and boil;
• the well-known method of triple exposure (soda, citric and acetic acid);
• pickles.

Prevention

You can defeat even the hardest and oldest raid, but this will take a lot of effort and time. It is better to remove a thin layer of scale: you will spend less effort and extend the life of your electrical equipment. For this:

• Clean your electric kettle regularly, at least once a month;
• if hard water flows from your tap, you can use a filter;
• When choosing an electric kettle, give preference to those with a heating coil located inside the body, because it is quite difficult to clean.

Lime inside your electric kettle can quickly damage the device and also harm your health. You can deal with it with acid or soda, which almost every housewife has. In addition, the household chemicals market offers many special means.

Scale not only worsens taste qualities boiled water, but also serves as a kind of fur coat that prevents the heating element from actively giving off heat. As a result, it may fail prematurely. How to effectively remove deposits and return the kettle to its shiny appearance?

There are many folk methods for descaling a kettle at home; previously, they were used by our grandmothers mainly to clean metal kettles, which were impossible to break. Everything that came to hand was cleaned.

Lemon acid

Fits for simple and electric kettles made of stainless steel or glass
It is forbidden use for metal, enamel teapots.
pros: cost savings.
Minuses: helps with minor stains

Citric acid helps restore cleanliness not only to kettles, but also to the tanks of automatic washing machines. The principle of operation is quite simple. The acid loosens deposits and helps water dissolve them.

In order for the teapot to acquire virgin purity, you need 1-2 tsp. dissolve powder in 1 liter. water and boil in a cleanable container. If your water is very hard and deposits build up quickly and large quantities, then the procedure should be repeated a couple of times. In this case, you are more likely to achieve the desired result.

To prevent deposits, use a strong solution of citric acid (1 sachet per 1 liter of water) for cold dishwashing. There is no need to boil anything. Simply dissolve the powder in the liquid.

Remove limescale from a kettle with vinegar and soda

Vinegar, soda and citric acid

Cleaning the kettle with soda

Fits for regular, enameled and electric kettles.
pros: safety, accessibility, cheap way, which will help get rid of old scale.
Minuses: May leave scratches on surfaces.

Alkaline solutions cope with deposits somewhat worse than acids. However, if nothing else is at hand, you can also resort to soda. Moreover, boiling in soda solution Effectively cleans not only kettles, but also smoked pans and pots.

Pour 1-2 tsp into a three-liter kettle. soda and boil water with it for about half an hour. Then let the water cool and wash the container in the usual way. If dirt still remains, repeat the procedure a couple more times.

Cleaning the kettle with Coca-Cola

Fits for all types of kettles, except electric ones. Care must be taken when cleaning enamel models.
pros: effective method.
Minuses: The dyes contained in the drink may stick to the surface of the device.

What housewives don’t do with the famous American drink. It turns out that it copes with hard water deposits just as well professional means. Before. How to start cleaning, open the bottle and let the soda sit overnight so that the gas comes out of it.

Pour the drink into the kettle up to half the volume. Boil and rinse with a soft sponge or cloth.

When working with Cola, you need to take into account that light plastic may become stained. Use this method carefully in devices with an open heating element.

Cucumber pickle and tomato

Fits for all types of teapots.
pros: availability, cost savings (since by and large, is a handy home remedy)
Minuses: does not remove heavy dirt from the surfaces of dishes, may leave bad smell which can be felt when water is boiling.

Some housewives claim that boiling brine in a kettle removes scale as well as citric acid. How plausible is this? Can salt dissolve salt? There is a rational grain in this, since the recipes of many marinades include vinegar. It creates an acidic environment in which magnesium salts can easily dissolve.

So, for work you will need one and a half liters of brine from tomatoes or cucumbers. Boil it in a kettle, then wash the container as usual.

Peeling apples and potatoes

Fits for enameled, metal, electric kettles.
pros: accessibility, environmental friendliness, cost-effectiveness.
Minuses: does not help get rid of stubborn plaque.

Apple and penny peelings contain fruit organic acids. They can be used to remove light touch. It is enough to boil water with the addition of cleaning agents, and the deposits can be easily washed off.

Potatoes are an alkaline product. Its action is similar to soda. You need to use potato peels just like peeling fruits. Just boil it in water and rinse the dishes thoroughly.

Heavy artillery

Fits for all models.
pros: Highly effective, helps get rid of the most difficult stains.
Minuses: chemical composition, may cause a local reaction in the body. Be sure to use rubber gloves while cleaning.

In severe cases, gentle methods are ineffective. In this case, you have to use stronger means. Keep in mind that these procedures cannot be used frequently. Otherwise, electric kettles may be damaged.

• Vinegar. For 1 liter of water, take 1 glass of 9% vinegar. Boil the solution in a cleanable kettle and hold for 15 minutes over low heat (if the cookware is enameled or made of stainless steel).
• Household chemicals. There are a great many different anti-scale agents. Before use, you must carefully read the instructions and make sure that the selected composition is suitable for your type of cookware. The manufacturer is required to notify users that the ingredients in the product may damage the plastic, rubber gaskets or metal bushings of the kettle. If there are no such marks, anti-scale agent can be safely used. Examples of popular chemicals from scale: ChistoFF, Planet Pure Spray, Selena, Doctor TEN universal, HG, Cinderella.

Cleaning features for teapots of various materials

Plastic and glass

Glass counts universal material, because it can withstand exposure to aggressive substances. It’s not for nothing that laboratory glassware is made from it. However, it is worth remembering that glass surfaces do not like abrasives. If you use soda for cleaning, do not rub it against the walls of the kettle, but only boil the soda solution.

Plastic equally does not like products with bleach and dyes. Therefore, it is better not to experiment with Coca-Cola, Fanta and fruits in plastic containers.

Enamel and stainless steel

Enamel can be colored in the presence of bright dyes, regardless of their composition. In addition, it does not tolerate sudden changes in temperature. Therefore, you first need to fill cold water, bring it to a boil, and then rinse it either hot water, or let the kettle cool to room temperature.

Stainless steel, like glass, can withstand almost any experiment with cleaning agents. Doesn't like abrasives. Small scratches spoil the beautiful gloss, although they do not affect the functionality.

Electric models

You can find two types of electric kettles: with an open heating element and a closed one. In the first case, cleaning is complicated by the fact that scale gets clogged under the heating element, from where it is difficult to remove it mechanically. In this case, it is better to use natural or industrial chemicals.

When using acids and other aggressive substances. It must be remembered that in an acidic environment, with frequent cleanings, oil seals and rubber gaskets gradually dissolve. For this reason, it is better to alternate sour and soda procedures, and also not to let the situation get worse until you need to resort to emergency cleaning methods.

Cleaning a stainless thermos from tea deposits

• The cleaning solution from the methods suggested above is poured into the thermos and left for several hours. Periodically you need to check the condition of the plaque. Rinse with soft purified water.
• Avoid using abrasive products.
• Wash the thermos immediately after use. Wipe the flask with a microfiber cloth. This way the water will leave much less sediment.
• Ventilate the thermos after cleaning to remove odors from cleaning products.

As you can see, it’s quite easy to deal with deposits on teapots and thermoses. For this, ordinary ingredients that can always be found in the kitchen are quite suitable.

Dear readers of the site, leave your comments. Tell us which cleaning method you think is the most acceptable and effective. Your opinion is very valuable to us.

May 22, 2017 Werri

The water in our water supply has the unpleasant property of forming a limescale deposit in kettles, covering its walls and heating element with an untidy layer. How to descale an electric kettle without damaging it? Is it possible to somehow avoid the formation of this muck in the electric kettle and get rid of it forever?

Unfortunately, it is impossible to remove scale so that it stops forming. Water, even filtered and completely clean, still contains hardness salts. They are not found only in distilled water, but using it in everyday life is not only expensive, but also not at all useful. So the task of “cleaning an electric kettle from scale” is one that regularly arises for everyone who uses a kettle. It will not be possible to remove this necessity from the list of mandatory things to do.

Home remedies to descale your kettle

You can remove scale from an electric kettle different ways, and the worst of them is mechanical. That is, it is absolutely not worth scraping off limescale deposits with hard, sharp objects. This can completely ruin the kettle by damaging its body or heating element. Even if the layer of lime deposits has become thick, it should be removed gradually. Otherwise, you’ll just have to throw away your favorite electric kettle and buy a new one.

Descaling is much more effective using various chemical reagents, which dissolve it or make the layer looser and more fragile.

Before you try to get rid of stubborn deposits by different means, the electric kettle needs to be thoroughly washed from the inside with a hard sponge (not metal!).

To easily clean the walls and spiral of the kettle from scale, you can use the following substances.

Citric acid or natural lemon juice

To do this, pour 80-100 g of citric acid inside a pre-washed kettle, add water to the top mark and turn on the device. When the water boils, you need to leave the acid solution until it cools completely, even overnight. After this, the electric kettle must be cleaned of the loose grayish sediment formed under the influence of acid and pieces that have fallen off the walls. If necessary, if it was not possible to remove all the scale from the walls at one time, the procedure can be repeated.

If you don’t have citric acid on hand, but have fresh lemons, you just need to cut 2-3 lemons into slices along with the peel and boil them in an electric kettle. Lemon juice It can clean the kettle no worse than powdered acid, and at the same time it also aromatizes it.

Video: checking traditional methods of descaling

Vinegar, table vinegar, apple cider vinegar or diluted vinegar essence

For a regular electric kettle with a capacity of 1.5-2 liters you will need 2 cups of 6% table vinegar, which must be topped up with water to the maximum level. To clean the kettle, vinegar needs to be boiled and left for several hours, just like citric acid. Just keep in mind: the smell of vinegar in the kitchen will be very strong. You can get rid of it later by intensive ventilation.

Very persistent, old scale deposits can be removed by combining Chemical properties acids and alkalis: vinegar and soda. To do this, you first need to boil a concentrated soda solution in a kettle. You will need about half a glass of powder per full kettle of water.

When the solution boils, drain it and fill the container with a strong solution of vinegar or citric acid. A violent reaction will begin with intense release carbon dioxide. Gas bubbles help to destroy dense layers of sediment, and in this way you can clean the kettle even from old deposits. After all the scale has turned into a loose sediment, the kettle needs to be washed thoroughly.

Lemonade

You can get rid of scale very effectively by using Coca-Cola, Sprite, Fanta or other similar carbonated drinks as a solvent. They contain orthophosphoric acid, which helps remove even the most stubborn limescale deposits. You just need to pour the drink into the electric kettle and leave it for a couple of hours. You don't even need to boil it. Then all that remains is to treat the inner surface with a moderately hard washcloth or brush and rinse.

For white kettles, it is better to use colorless drinks to avoid staining the plastic.

Otherwise, you will then have to look for ways to clean your white electric kettle from colored traces of forfeit.

Oxalic acid

If you have oxalic acid on your household, it is also suitable for descaling. Instead of acid, you can place a large bunch of fresh sorrel inside the kettle - the effect will be the same, you just have to wait a little longer due to the lower concentration of acid.

Finally, you can visit a household chemicals store and buy special anti-scale products there. Their range is quite large. But you shouldn’t expect that the use of expensive special products will help you get rid of scale easier and faster than the methods described above. They all work almost equally effectively, and the more convenient it is to clean the electric kettle, everyone chooses according to their taste.

Video: getting rid of scale in an electric kettle

What can be done for prevention

Finally, a few tips for preventing scale formation.

• Buy an electric kettle with a closed spiral or heating disk. They are much easier to care for than models with an open spiral. It will also be easier to remove the scale that appears.
• Don't run your kettle too hard. It is better to remove a thin layer of scale once a month, simply by boiling a solution of citric acid, than to waste half a day off once a year to get rid of a thick layer of limescale that has covered the entire interior.
• Use filtered water for boiling. This is healthier for both the teapot and your health.

An electric kettle is practically indispensable household appliance. With its help, you can boil water for making tea or coffee quickly and easily. There is no need to monitor it; after boiling, it will turn off on its own and will not waste electricity. But even the most modern electric kettle requires care and regular cleaning.

Causes of scale

The electric kettle seems to be a device that requires absolutely no maintenance. But if you don’t pay enough attention to the technology, over time it may begin to work less efficiently or even break down.

Most common cause failure is caused by the accumulation of excessive deposits. They cover the walls and heating element, reducing the rate of heating of the water.

Scale in an electric kettle is salts and compounds contained in water and precipitated when heated. It is impossible to completely get rid of this phenomenon. But a set of care measures will allow using various means as little as possible.

It is important to understand that deposits on the bottom of the kettle are not only a cosmetic problem. They significantly reduce the rate of heating and, if ingested, can cause the formation of sand in the kidneys or aggravate an existing disease.

Routine care

Correct daily care behind the electric kettle will allow global cleaning to be carried out very rarely. To keep salt deposits to a minimum, it is important to follow the following instructions:

1. The container should be cleaned regularly, preferably every evening. Simply drain the water and wash the inner surface with a sponge.
2. Do not boil more water than necessary. Salts from the liquid remaining after heating in the kettle will thicken the layer.
3. Use purified water. This will protect your equipment and is healthier.

To ensure that maintenance is not too labor-intensive and that your household appliance lasts as long as possible, it is important not only to know how to remove scale from an electric kettle, but also to do it regularly. Thin layer deposits are much easier to deal with and you don’t need to use special products to remove them.

Almost any acid-containing products effectively remove deposits. To clean electric kettles, you can use both industrial compounds and improvised means.

Special means

Helps fight scale on the walls and heating elements of electric kettles ready-made compositions, which can be purchased at the store in the household chemicals department. It’s quite easy to recognize them; the manufacturer puts an image of the equipment on the packaging, the name usually corresponds to: “Anti-scale” and the like.

They should be used in strict accordance with the manufacturer's instructions, and do not exceed the dosage and exposure time.

Usually the scheme is simple: the product needs to be dissolved in water in a certain proportion, poured into a kettle, boiled and left for a while. After this, wash the equipment and use it as usual.

Included industrial products contains several types of acids and auxiliary substances that successfully combat salt deposits. It is important to know how to clean an electric kettle so as not to harm the health of your family. You can also use improvised means that are found in every home.

Lemon acid

It is an integral component of special products. It can be used to clean equipment quickly and efficiently. And what’s especially nice is that such care will not be expensive at all.

For one treatment you will need 1 sachet of acid containing 25 g of the substance.

You should proceed according to the following scheme:

1. Fill a kettle full of water and add the contents of 1 sachet.
2. Bring the water to a boil and turn off the device. Be careful; when boiling, the solution may begin to foam.
3. Leave for 30 minutes to act. Then drain the composition.

The impact is based chemical reaction converting citric acid to acetic acid.

After cleaning, thoroughly wash the equipment and boil clean water in it. This will help get rid of the smell. If necessary, repeat all manipulations.

Food vinegar

Food vinegar, which is found in every kitchen, is acetic acid diluted to a safe concentration. With its help you can clean the kettle quickly and efficiently.

Pour a vinegar solution into the kettle (1 part 9% vinegar to 2 parts water). Bring the mixture to a boil and turn off the device. Leave until completely cool. After draining the active composition, wash the container thoroughly with a moderately hard sponge.

The acid will soften the scale and make it easy to remove.

After cleaning, the equipment should be thoroughly washed and clean water boiled several times. This will help get rid of the specific smell of the acidic composition.

Baking soda

Soda is a fairly active substance that can remove even a large layer of scale. It is worth turning to it if a softer influence does not bear fruit.

Pour water into the kettle and add a tablespoon of soda to it. Boil and leave the composition to act for several hours. The alkaline solution will soften the deposits and they can be removed with a sponge.

If this action is not enough, you can repeat the procedure or add citric acid to the water instead of soda at the rate of 1 sachet per 1.5 liters of water. Boil the solution and leave for an hour.

After this, traditionally clean the surface with a sponge.

Carbonated drinks

Most carbonated drinks contain citric acid. This is what will help you deal with scale in the kettle. The method of removing deposits using drinks is passed on by word of mouth and is considered effective, but it also has its own characteristics:

1. You should choose colorless drinks. Dyes, especially bright ones, can leave stains that are more difficult to clean than salt deposits.
2. Before use, partially remove gas from the liquid. Otherwise, during the boiling process, the drink will foam, flooding everything around.
3. The drink should be poured into a kettle, boiled and left to act. Literally in an hour the scale will begin to come off in layers and can be removed mechanically.

Before cleaning an electric kettle, it is important to warn all family members about this. Liquids and compositions used for such work are colorless and can be confused with plain water. A few sips of citric acid solution will not cause significant harm, but negative emotions guaranteed.

So that the electric kettle remains an indispensable assistant, it should be cleaned regularly, avoiding the formation of a significant layer of scale. It is enough to boil the acid composition once every few weeks, and heating elements the equipment will shine clean.