DIY table made of tongue and groove boards. Do-it-yourself high-quality wooden table

Furniture made from solid wood has been highly valued at all times. Now it can rightfully be considered a luxury item. However, anyone who has basic carpentry skills and sufficient desire can make table from an array with minimal investment.

Furniture should be durable, reliable, beautiful, and correspond to its functional purpose.

Of course, buy ready product much simpler and faster, but making it yourself has a number of advantages:

Price. Table cost from natural wood quite high.

However, when made at home, it will decrease significantly.
Quality. By selecting wood yourself, the risk of using low-quality materials is reduced.

You can choose exactly the breed that will meet all the necessary technical and aesthetic requirements.
Durability , directly related to the build quality of the product. When creating furniture for yourself, even a novice carpenter will assemble the structure carefully and reliably.
Pre-treatment of all boards with special protective equipment guarantees long term services.
Design . Despite the huge selection in stores, situations often arise when you like everything, but would like to change some small detail.
By making a table yourself, you can take into account all the nuances and create the ideal model for yourself.
And of course, there is nothing more pleasant than admiring and using your creation every day.

This great opportunity not only save money, but also bring a piece of your soul into your home.

Choosing a table model

Before you begin selecting materials and directly creating a piece of furniture, you need to decide on its design. The model directly depends on functional purpose and features of the room.

For example, if the room is small, it is better to choose compact products.

In this case, a neat one will do. round table on 1 leg.

For a spacious dining room, living room perfect option– classic rectangular table.

It can also be a roomy oval table with a massive base.

If there is a need for a product with a large capacity, but the room does not require the presence of large items, you should think about a sliding or folding design.

If necessary, the tabletop can be extended.

For beginning craftsmen, it is easier to make a piece of furniture square or rectangular shape on 4 medium sized legs.

This table is made without additional mechanisms.

Which type of wood is better?

Each type of wood has its own characteristics that should be taken into account when designing furniture.

People have long considered wood as the main building material.

For a more convenient and detailed comparison of characteristics, let's refer to the table.

Table 1. The most common types of wood used in the furniture industry

Name	Average density kg/m 3	Chip strength	Characteristics
Oak	700	9,9	A very durable rock, resistant to rotting processes. It has a beautiful, noble texture.
Beech	670	12,1	Representative of hard rocks, easy to process, pliable. However, it is prone to rotting, which requires careful antiseptic treatment. When it dries out, it deforms more than oak.
Larch	660	9,8	Durable, resistant to rotting and deformation, prone to cracking. Therefore, it is not recommended for rooms where there are constant changes in humidity and temperature.
Birch	630	9,0	Quite durable, resistant to deformation, chipping and cracking, but with constant humidity it has a tendency to rot. This drawback is easily neutralized with the help of antiseptic treatment, since wood is easily impregnated with special compounds.
Pine	500	7,4	Durable, soft, lightweight, slightly deformable. Due to its natural characteristics, it is pliable when working. Easily impregnated with antiseptic compounds.
Spruce	450	6,8	Less smooth texture compared to pine, has a larger number of knots. It is not so well treated with an antiseptic, it is more capricious in processing.
Aspen	380	6,5	The texture is not particularly expressive, the color is whitish-green. Due to its softness, it does not crack, is easy to process, and is little susceptible to rotting. However, marks from mechanical influences may remain on surfaces made of this material (for example, if a child draws with strong pressure on a pen or pencil)
Fir	370	5,9	The wood is soft, does not tolerate moisture well, is susceptible to rotting, and is therefore not suitable for furniture that will be used outdoors or in rooms with high humidity. It is easy to process, which will simplify the work of novice carpenters.

So, after carefully studying the table, it becomes clear that soft rocks wood (aspen, fir) will be easy to work with, but during service they may disappoint due to their susceptibility to mechanical stress and low moisture resistance. It's better to opt for more durum varieties such as pine, larch, beech and oak.

We did not consider heavy-duty wood species (hornbeam, yew, etc.), since their processing is extremely difficult at home.

Necessary materials

To make the table you will need the following materials.

Beam 40 mm x 40 mm for attaching the supporting part to the table top and giving the structure strength and stability.
Beam 70 mm x 70 mm for making legs. If the design includes classic carved balusters, and your experience in woodworking does not allow you to make them yourself, go to the store furniture fittings you can always pick up suitable option and purchase finished product elements.
boards and for countertops (thickness not less than 40 mm).
Wood glue.
Furniture dowels and confirmants.
Antiseptic.
Varnish or glaze for processing wooden products.

The number of boards depends on their width and the expected size of the table.

Tools for work

All the tools necessary for work can be divided into 3 groups.

Measuring tools:

Metal ruler 50-100 cm;
Roulette;
Metal square;
Manual level 50-80 cm.

Tools for creating furniture with your own hands.

Tools for working with wooden surfaces:

Saw/hacksaw;
Jointer;
Sanding machine, sandpaper.

The necessary set of tools.

Tools for assembling the product:

Wedge or screw clamps;
Mallet (suitable for both wooden and rubber strikers)
Screwdrivers with different points;
Drill, screwdriver.

Making a wooden table with your own hands: step-by-step instructions

Tabletop

Handle everything thoroughly boards.

Having achieved a perfectly smooth and smooth surface, drill holes for dowels in each end in increments of 10-12 cm (for the end boards they should be made only on one side).

All edges must be milled and surfaces sanded.

After thorough cleaning of chips and dust, they must be coated with special wood glue (PVA can be used).

Then the boards are fastened together using wooden dowels placed in the prepared holes.

Important! When gluing, direct the pattern towards different sides. This increases the strength of the product and reduces the risk of deformation.

When the canvas of boards is assembled, it is necessary to dry it, securing it with clamps.

After complete drying, cut off excess glue. construction knife and sand the surface with a sander.Treat the finished shield with a special antiseptic.

Thus, it takes one day of work to make a canvas from wood.

Underframe

Let's look at the process of creating a standard underframe (4 legs and a rectangular frame).

Saw off the required size beams for all elements, process them using grinder or by hand with sandpaper and coat with antiseptic.

To save time, it is better to carry out the procedure in parallel with the countertop.

When the prepared elements are ready, fasten the pairs of legs with smaller cross beams using furniture screws.

They can be pre-lubricated with glue.

Important! Self-tapping screws are screwed in with inside at an acute angle to the surface.

In the same way, fasten the legs with long beams.

Drill holes in the center of each leg for further assembly of the furniture.

If you are planning to do table two-color, painting of the prepared elements should be done before final assembly. If the product is the same color, assemble the structure and paint it entirely.

Final installation of the product

Place the table top face down on a flat, clean surface and begin working:

Place the base on top the way it should be attached and draw a pencil along the inside.

Mark the joints of the parts in increments of 200 - 230 mm on both surfaces.

Drill holes in the underframe and tabletop, remove shavings from them, coat them with glue and assemble the product using special furniture fasteners (as when making wooden panels). Use a mallet if necessary.

Leave the product to dry for a day (at least 12 hours).

The final stage

When the structure is assembled, perform final sanding, apply decorative elements in accordance with design project and cover with several layers of varnish or glaze.

By following the instructions, you can easily make a wooden table with your own hands.

Important! Each layer of coating must dry completely. Therefore, the final finishing of the table will take at least 1 more day. Therefore, the process of creating your own masterpiece from an array will take you about 3-4 days.

Having spent minimal amount Money and a few days, you will receive a reliable and durable dining plank table and oak, pine or other material you like, and a lot of positive emotions.

So you have learned how to make your own table from solid wood.

VIDEO: DIY solid wood dining table.

If you dream of having a good time on your personal plot, then you just need big table, which can accommodate a group of your friends and family. Moreover, you can do it with your own hands, spending very little time on it. In some cases you may need a helper, sometimes an extra pair of hands won't hurt.

This article provides detailed step-by-step instructions for making a wooden table for a summer house.

To give you a choice, we offer you four project options at once country table- two regular tables for a picnic, a table with benches that form a single structural unit, and finally a round table. You should think through all the details in advance and choose the type and size of table that would suit your needs and the style of your garden plot.

Folding picnic tables - mobility comes first

Folding tables are very convenient, and most importantly practical and simple. They don't take up much space. At any moment, such a table can be neatly folded into the garage, and, if necessary, again moved outside. The mobility of furniture is especially appreciated in small areas.

How to make a garden wooden table with your own hands

A dacha is the place where a craftsman, a carpenter, a carpenter, a gardener, in general, a master, awakens in a person. Buy furniture for suburban area- it’s a simple matter, but to do it wooden table Not everyone can do it with their own hands. You must immediately be prepared for what to do garden table you will do it yourself for a few days. But the tips listed below will help you make a good-quality table yourself.

Today we will construct a fairly simple country table with our own hands in provencal style. Such tables not only look great, but also have quite reliable design. It's worth paying attention to the boards. They must be even, since the appearance of our country table will directly depend on this.

When designing a table for a summer house, it is necessary to prepare lumber in three dimensions:

Supporting frame - section 38 x 90 mm.
Tabletop - section 38 X 140 mm.
Supporting strips - section 19 X 64 mm.

Drawing

Before starting work, the most important thing is to find it on the Internet, or make your own drawings of a table for a summer house with your own hands. An accurate schematic designation will allow you to select lumber that will be most suitable in cross-section to the dimensions indicated on the diagram. It doesn’t matter if the dimensions don’t exactly match each other, because you can always make an adjustment using an electric planer.

Preparation of material

When deciding how to make a garden wooden table, approach the issue responsibly, since the life of the furniture will depend on this:

purchase of blanks. Professionals advise purchasing lumber from coniferous trees, which was previously well dried. Its main advantages are:
- price;
- simplicity and ease of manual processing;
- beautiful structure;
furniture glue;
4 X 65 mm screws;
3 mm drill;
drill;
tape measure, pencil, sandpaper.

Further actions

We will need:

two upper transverse beams, dimensions 38 X 90 X 978 mm;
four legs for a country table with your own hands, size 38 X 90 X 695 mm;
two bowstrings - 38 X 90 X 921 mm;
one longitudinal lower and one upper beam - 38 X 90 X 1575 mm and 38 X 90 X 1473 mm, respectively;
two pieces of braces 38 X 90 X 772 mm;
blanks for the tabletop - seven pieces, measuring 38 x 90 x 2337 mm;
six support strips - 19 X 64 X 432 mm.

Advice: start work on a flat surface. It is extremely necessary to observe the joining angles of the parts. The blanks, which will later become the legs of our country table, should be cut on both sides at an angle of 10°. The cuts must be parallel. But the bowstring blanks, which are similarly cut at the same angle, should be cut one towards the other.

Stage 2. Our legs country table should be attached to the cross beams and this entire structure should be fastened with screws. There are two screws for each connection.

We screw the string diagonally to the leg from the inside, in the same way fastening the structure with two screws.

The lower beam must be used to connect both strings to each other. As mentioned above, using screws.

Next, holes are first made in the upper longitudinal and transverse beams for fastener, called a dowel, after which we again diagonally connect the blanks of our country wooden table with the existing screws.

Tip: when connecting all the elements, use glue for additional strength. Remove excess immediately.

We place the braces on the screws.

Tip: blanks intended for braces should first be cut at an angle of 45 degrees

We fasten the blanks for the table top with screws to the cross beams with our own hands.

How to make a rectangular table for a garden

After developing a work plan and approving the drawings of the garden table, purchase all the materials needed for this project. Choose wood intended for use on outdoors- pine, cedar, redwood or pressed wood. When purchasing, check each board: they must be completely smooth and without any visible defects. Do not skimp on the quality of lumber, because your structure will have to withstand all weather adversity.

There are a few important points, which you must take into account if you want the result to be high professional level. Do not forget about the accuracy of measurement and use professional tool when cutting boards and bars and drilling holes. To increase the reliability of the structure, you can additionally use waterproof glue to fasten the parts. Round open edges using a router or sandpaper.

Attention! Dimensions are converted from the inch system and may not correspond to the metric measurement system. Choose lumber that is as close in size as possible. Or just customize it yourself.

Tools required to implement the project:

hacksaw, jigsaw;
milling cutter;
drill and drill bits;
chalk cord, tape measure, spirit level, pencil;
safety glasses and gloves.

Time:

From one day to a week depending on the chosen project. If you have power tools at your disposal, you can finish the job even faster - in just a few hours.

Adviсe:

A router will help smooth the edges of wooden blocks and boards.
Before screwing in screws and self-tapping screws, drill into wooden elements design guide holes.
The heads of the screws that are screwed in should not protrude above the wooden surface, and for this, the entrance parts of the holes must be countersunk.
Do not use cracked or warped lumber.
Do not use excessive force when tightening the screws, otherwise the wood may crack.

DIY picnic table. Step-by-step instruction

Materials:

A - Legs: 5x10 cm bars, 106 cm long (2 pcs.), 43 cm long (2 pcs.) and 56 cm long (2 pcs.);
B - Frame: bars 5x10 cm, length 87 cm (2 pcs.);
C - Tabletop: boards 5×15 cm, length 180 cm (6 pcs.);
D - Tabletop base: boards 5x15 cm, length 87 cm (2 pcs.), bars 5x10 cm, length 62 cm (2 pcs.).

The first stage of the project is making the table legs. Saw off the bars required sizes. To speed up the process, you can use circular saw. Smooth the edges of the bars and cut lines with sandpaper.

Connect the bars to form an X-shaped structure and fasten them with 60 mm self-tapping screws, not forgetting to pre-drill the guide holes. Lubricate the joints with glue. Make sure there are no cracks or gaps.

Fasten each pair of legs with a horizontal block, using 60 mm self-tapping screws for this purpose. Cut off the ends of the bars as shown in the figure.

Place the boards intended for making the tabletop on a flat surface. We advise you to place pieces of 6 mm plywood between them, this will create uniform gaps. Place the assembled table sides on the tabletop and secure them by screwing in self-tapping screws at an angle of 90 mm. Before fixing, make sure the legs and table top are perpendicular using a spirit level.

Place sawn pieces of 5x15 cm boards on the underside of the tabletop and secure them with 60 mm self-tapping screws.

Saw off the ends of the bars, which will serve as supports reinforcing the structure, at an angle of 45º. Place the supports in their place and secure with 90 mm self-tapping screws screwed in at an angle.

And finally, last but not least: check that the heads of the screws do not protrude above the wooden surface, and fill all cracks and holes with wood putty.

Tip: To protect wooden surfaces from the damaging effects of atmospheric moisture, cover them with several layers of exterior paint or stain.

Table with benches. Instructions with drawings

Materials:

A - Legs: bars 5x10 cm, length 95 cm (4 pcs.);
B - Crossbars: bars 5×10 cm, length 160 cm (2 pcs.);
C - Fastening the tabletop: 5×10 cm bars, 75 cm long (5 pcs.);
D - Inclined supports: bars 5x10 cm, length 84 cm (2 pcs.);
E - Tabletop: boards 5x10 cm, length 180 cm (14 pcs.).

You should start by making the legs. Since the legs of this table will be inclined, the ends of the 100 cm long bars should be cut at an angle of 30º. Connect the elements with 90 mm bolts.

Make sure the surface you are working on is fairly level. The mounted sides of the table must be identical, only in this case can you hope for an excellent final result.

When the sides of the table are ready, you can begin making the wooden tabletop. We recommend that you knock it together on the ground (floor), and then attach it to the legs using self-tapping screws.

Tip: Don't forget to make sure the side walls of the table are vertical using a spirit level, otherwise the end result of your work is unlikely to satisfy you.

Rigidly fix the entire structure using inclined supports. Their ends should first be cut at an angle of 26º.

Now all that remains is to build the benches. Saw off the boards the right size, place them on both sides of the table and, having previously drilled several guide holes at a distance of at least 1 cm from the edges, secure them with self-tapping screws.

Tip: To ensure that the seat boards are evenly distributed, place nails or pieces of plywood between them before attaching them. Thanks to this little trick, all the gaps will be the same.

At the end of the work, pay attention to small but very important touches. Fill all cracks and holes with wood putty. After the putty has dried, sand the wood surfaces with medium-grit sandpaper.

Tip: Be sure to apply several coats of paint or stain to protect wood surfaces from exposure to water and sunlight.

Round table. We do it at the dacha on our own

Materials:

A - Base: 5×10 cm block 102.5 cm long (1 piece) and 47 cm long (2 pieces), 2.5×10 cm block 9 cm long (4 pieces);
B - Stands: bars 10×10 cm, length 60 cm (4 pcs.);
C - Tabletop base: 5x10 cm bars 82.5 cm long (1 pc.) and 52.5 cm long (2 pcs.), 2.5x10 cm bars 47.5 cm long (4 pcs.) and 60 cm long (2 pcs.) ;
D - Tabletop: boards 2.5×15 cm, length 195 cm (9 pcs.).

The first stage of the project is to create the table base. To connect its constituent elements, use waterproof glue and self-tapping screws. Make sure that the corners formed by the bars being connected are straight. To protect the assembled table base from rotting under the influence of rainwater, place it on small stands made from scrap 2.5x10 cm boards.

Now you need to attach four racks made from bars to the base square section. Before fixing, make sure they are vertical using a spirit level. The height of the legs may differ from what we propose; in this case, you should, first of all, be guided by your own needs.

The most difficult stage of the project is making the countertop. Place the boards on a flat surface and mark the center of the square. Secure one end of a 60 cm strip at this point. Rotate the other end of the staff to mark the outline of the circle. A jigsaw with a sharp blade will allow you to make circular cuts at a high professional level.

After cutting the boards of the future tabletop, we recommend that you fasten them together waterproof glue and additionally secure with several clamps. Attach the bars that serve as the base of the tabletop, as shown in the picture (yellow elements should be made from 5x10 cm bars, green ones from 2.5x10 cm bars).

Tip: To attach the bars to the tabletop, use waterproof glue and galvanized screws (30 mm self-tapping screws for fastening 2.5x10 cm bars and 50 mm for fastening 5x10 cm bars).

After the glue has dried, you should attach the legs to the base of the tabletop using 90 mm self-tapping screws, having previously drilled pilot holes. Use a spirit level to check the perpendicularity of the legs and tabletop.

To ensure that the result of your work corresponds to a high professional level, make sure that the heads of the screws are recessed deep enough. Cover all cracks and holes with wood putty, and after it dries, sand the surface with sandpaper.

Tip: Apply several coats of exterior paint or stain to protect the table from moisture damage. To ensure that the base stands are also untouched by water, place the table on concrete surface and seal them hermetically.

Now you know how to make a picnic table yourself. You just have to put in a little effort, which will subsequently be rewarded with enthusiastic exclamations from friends and pleasant summer evenings spent with your family at a large table.

It is no secret that the dacha uses furniture that has served its time in the apartment. The table is no exception. However, in dacha conditions, the furniture that served well at home cannot always fulfill its purpose. This is about modern tables, made mainly from laminated chipboard. Such tables are not suitable for a gazebo, veranda, garden, or even in a house high humidity in the off-season their service life is limited. In such conditions, a wooden table is needed, but a wooden table is not a cheap pleasure. The solution to the problem is to make a table with your own hands. This is quite easy to do. In addition, this will allow you to save significantly, including on delivery.

The simplest table design

The most simple design table is shown in the photo below. At the same time, this design is the least expensive both in terms of materials and manufacturing effort.

Fig.1.

Optimal dimensions table

One of the advantages of making a garden table with your own hands is that the table can be made of any size. Thus, the table can be easily adjusted to the dimensions of the gazebo, veranda or kitchen.

To make it easier to navigate the sizes, I will give a size chart, which is most often used in the production of tables. The size chart is based on the size of the countertop.

60x90 cm. A table with this size is optimal for 3 people. At such a table it is convenient to have lunch, drink tea, etc. Thanks to its size, it will fit well into any small space.
80x120 cm. 4 - 6 people can comfortably sit at this table. Typically, a table of this size is appropriate to place in a large kitchen or on the veranda.
More than 120 cm. Tables with these sizes are good for feasts. In dacha conditions and limited space country house Basically, such a table is installed in a gazebo or under a canopy in the open air.

Naturally, when making a table with your own hands, you can make the size arbitrary, however, in order to be comfortable at the table, you should adhere to the recommendations given above.

Manufacturing procedure and table drawing

The table drawing is shown in the figure below.

Fig.2.

Table legs are made from wooden block with a cross section of 40x40 mm and a length of 70 cm. If you want to decorate the table, you can use balusters as legs. They are carved and will make the table design more interesting.

The support for the tabletop can be made from a board with a cross-section of 25x150 mm, sawing it lengthwise into two halves. For support you need 2 boards 650 mm long and 2 boards 1050 mm long.

With the countertop everything is much more interesting. The table top can be made different ways. The easiest option is to purchase a furniture panel of the required size. It can be purchased at online building materials hypermarkets.

Fig.3.

If you take this path, you should remember that furniture board is made by gluing small sections of boards, and if it is constantly exposed to precipitation, it will quickly become unusable. Therefore, a table with a tabletop made of furniture board must be varnished or painted to protect it from moisture.

Another option is a plank countertop. Boards can be used in any size. For example, with a section of 25x100 mm. It's simple and cheap option countertops. This option does not have the disadvantages that are inherent in furniture panels.

Fig.4.

However, without special equipment it is unlikely that it will be possible to fit the boards tightly. Therefore, the tabletop will have gaps between the boards. This looks good for a garden table. But not very practical.

You can get rid of the gap mentioned above by using an unusual, tongue-and-groove board. It will cost a little more, but you will get a smooth, even tabletop.

Fig.5.

Euro floor boards can be used as tongue and groove boards. They are easier to find in the store. It’s just important not to forget to stitch them from the wrong side.

Table assembly

Once all the elements of the table are ready, you can begin assembling the table. The table is assembled in a certain order.

First, assemble the support for the tabletop and attach the legs to it. This is the most difficult moment in assembling the table. As described earlier, the tabletop support consists of 4 boards. They need to be connected to each other. There are several ways to do this.

The photo below shows how to assemble a tabletop support and secure the leg to it using a special tie.

Fig.6.

This method perfect solution, except for that fact. It may not be easy to purchase a special screed.

Another way is to tighten the entire structure using a wooden block.

Fig.7.

Applying this method You need to pay attention to the fact that the block must be sawed off at an angle of strictly 45 degrees. Otherwise, the table will not be rectangular.

In my opinion the simplest and affordable option Assembling the legs and supports for the tabletop is the use of a metal general construction corner measuring 50x50 mm. You can buy it in any store, and it has the correct geometric shape.

The last step in assembling the table is installing the tabletop. Depending on the type of tabletop, it can be secured in various ways. Furniture board Can be attached with corners or with glue. Separate boards using screws and glue.

Fig.8.

As you can already understand, making a table for a summer house or at home with your own hands is quite simple. It is important to approach the issue creatively. This table can be decorated with any paint and varnish coatings. A wooden table made by yourself will delight you every day and will last for many years.

Wooden tables and design ideas

Fig.9.

Fig. 10.

Fig. 11.

Fig. 12.

An ordinary table can be safely classified as furniture necessary in the home. This item can, of course, simply be purchased in a store. But it’s not at all difficult to make a good, solid table with your own hands.

The last option is most often chosen by homeowners.
Making a table from boards with your own hands

As the simplest option, you can consider in detail the manufacture of a table with a length of 120 cm, a height of 75 cm, a width of 70 cm. For it you need to prepare the following materials:
boards 40X140 mm, planed and trimmed, or a floor strip of a suitable size - for example, 36X135 mm;

a pair of bars with a cross-section of 40X60 mm, length 70 cm;

4 furniture screws 10 cm long, with a diameter of 8-10 mm and a flat head;

jigsaw or hacksaw;

chisel;

plane;

a grinder or a block with sandpaper attached to it;

screwdriver and drill set.

Vintage wooden table option (dimensions in inches).

To make a tabletop, you will need to proceed as follows.
The tabletop must be assembled from five boards cut to size. They should be attached to the bars using self-tapping screws.

For self-tapping screws, the length must be selected so that the tabletop board with their help is securely attached to the bars, and they should not pass through. When using a tongue-and-groove board, the tabletop is assembled solid, but from the last board it is better to remove the tongue from the edge using a jigsaw and plan the side.

If you use a regular planed board, when assembling the tabletop it is better to leave a gap of about 3-4 mm, especially if the table is intended for a summer residence. Such a gap does not interfere with the use of the table, but it greatly facilitates maintenance and does not allow dirt accumulation in those places where the boards adjoin one another, making up the tabletop. It is very simple to ensure that the gaps are identical: when assembling the tabletop, you need to lay a strip with the required width between the boards or use a metal corner.
Return to contents

Legs for structure

The legs are made from the same material as the tabletop. For one leg, both parts will be connected “half a tree”. Boards for making legs are marked as follows:

on fiberboard sheet or plywood you need to draw a rectangle. Its dimensions are determined by the formula “A”X600 mm. Here A=750 – b (that is, the thickness of the tabletop, calculated in millimeters);

The board is placed diagonally across the rectangle so that different edges of the board are in opposite corners. Now you can mark the line along which you will need to cut the boards, the “junction” on one and the other boards.

After marking the parts of the legs, they are cut to length, and a selection of half a tree is made on each. Next, everything is adjusted and assembled using PVA glue with the addition of small sawdust and several screws. After the legs of the table are assembled, they must be attached to the bars of the tabletop using furniture screws; a stiffening rib must be strengthened between the legs - this is done using long self-tapping screws. You can cover both ends of the tabletop with bars; to secure them, use nails whose heads have been previously “bitten off”. They should be sunk into the wood with one blow of the hammer.

Almost ready. It is highly advisable to color the product. To do this, you can use stain or colorless acrylic varnish water based. This ensures protection from precipitation and external influences.

Return to contents

Classic wooden product

For those who prefer classic shapes, we can suggest making just such a table. The following materials will be required:

4 pieces of timber with a length of 710 mm, section 10X10 cm;

board with a section of 10X2 cm, cut as follows: two pieces of 800 mm, two of 1600 mm, two of 750 mm;

four boards with a section of 250X40 mm, length 2 m.

The manufacture of table parts is carried out as follows. Wooden table top It will be necessary to give it a rounded shape on both sides. To make the markings, taking into account the fact that all the details are made by hand, you can use the most ordinary gymnastic hoop or an object of a similar shape. It is placed on boards stacked tightly against each other - first at one end, then at the other. According to the markings, the boards are cut using a jigsaw.

All the details of the table have now taken the form necessary to continue the work. They are cleaned using coarse sandpaper, then the surface is sanded and impregnated with stain two or three times.

Assembly must be performed in the following sequence:

The base box is assembled from parts whose width is 1600 and 800 mm. For fastening, galvanized self-tapping screws 4X60 are used. Before assembly, the joints are properly treated using waterproof PVA glue or a good carpenter's adhesive. Short parts of the box must be attached to the end of the longer one;

The boards for making the tabletop must be laid out on a flat surface. A prepared box is placed on top - it must be centered and drawn with a pencil inner circuit. After this, the box is removed;

in the outlined contour itself, an indentation of 110 mm is made from the corners - this is the place for the table legs. Next, using glue and galvanized screws 4X45, boards are attached to the tabletop, which will ensure the integrity of the tabletop;

the box is placed on the tabletop, while the pre-made contour must be taken into account. The parts are fastened with self-tapping screws, and steel corners must be used. The place where the table legs will be installed must be left free;

the legs are installed in the corners of the box, fixed with glue, with outside screwed using self-tapping screws. The strength and durability of the structure largely depend on how tightly the table leg is placed in the corner of the box. Therefore, before using self-tapping screws, it is better to ensure that the leg is fixed in the corner with any in a convenient way. The table is ready with your own hands.

You can start using the table when the wood glue dries and the structure acquires the necessary strength.

Table for summer cottage- not just a piece of furniture, it is a ritual place where all household members invariably gather. In the summer, no one wants to go indoors to drink tea or have lunch. On fresh air and the appetite is better, and the food tastes better. In order not to drag furniture from home for gatherings, you can do outdoor table for the dacha with your own hands, at the same time taking care of the benches.

garden table with built-in bench

A country table does not imply a complex design, so assembling it will not be a problem even remote from carpentry and creative works personalities. We will present to you several very simple and at the same time original ideas its creation, perhaps something from what we have proposed will become a decoration for your site.

Material for country table

DIY garden table: interesting ideas

Conclusion

Photo gallery - DIY garden table:

the garden table must be durable

Outdoor furniture undergoes serious testing, so it must be made from durable materials. Specifically for the table you can take:

Stone.
Tree.
Metal.
Available materials.

The tables from the latter look especially interesting. But first things first.

Wooden table

outdoor dining furniture set

Selecting material Special attention pay attention to the type of wood. There are different boards and boards and, in our case, not all are suitable for use. Pliable and easy to work with conifers, alas, will not fit. In addition to the fact that they need special impregnation, because they are too fire hazardous, the resin they release will spoil the tablecloth and dishes.

The necessary elements must be looked for among hardwood blanks. On the tabletop you need to assemble boards with a thickness of 30-50 mm. For added strength, they are stuffed onto a frame. The legs of the structure can be saddled straight or X-shaped. It is important to process all the details well so that there is no danger of driving a splinter while wiping the table. It is mandatory to treat the finished product with protective impregnations.

folding wooden table at the dacha with your own hands

In order to make a table “for centuries”, cover it with varnish, and do this, as they say, without sparing the brush. The composition must be literally rubbed into the wood, and this will only be possible if you slightly heat it in a water bath. Varnish coating make three layers.

Stone table

a round table and benches made of stone will last for decades

You want to do monolithic structure that amazes the imagination and creates a special mood for meals - try working with stone. You can create this type of table for your garden with your own hands or buy a finished product. Stores offer a wide range of granite and marble options. There you can also select benches made of similar material to go with them.

to inspire life in old table, it is enough to tile the countertop

It will not be cheap, but if you really want to have such a luxury in the garden as a stone table, try to make it cheaper. Lay out the bases of the benches and table yourself. This will work quite well for this:

Flagstone.
Brick.
Modern blocks.
An ordinary cobblestone.

table made of stump, lined with stone

It will be much easier to fit these materials into the overall concept of the garden and combine them with existing buildings. It is quite possible to take it on the tabletop, seats and backrests fake diamond. The composition will not lose its view from this.

Metal tables

Those who are “friendly” with hardware and have it on hand welding machine, you may be interested in the option metal furniture. The products are elegant and aesthetic, with openwork decorative inserts. The metal table will also need to be protected from premature destruction. This is done by priming the metal before final painting.

round garden table with stone top and shaped metal legs

Forged tables will satisfy the needs of respectable owners, but it is impossible to make them with your own hands. Such designs are ordered by professionals. Forging requires the conditions of a forge. However, considering that products of this type can be wonderfully combined with wood, stone, glass, you can only purchase a forged base for the table and complete it with a tabletop yourself.

DIY garden table: interesting ideas

Styling the table and chairs to look like a mushroom meadow will create some zest in the landscape design summer cottage

If you are determined to work on creating a country table yourself and are ready to make it non-standard, look at the “unnecessary” things available in every shed. Perhaps among them there are items that can become consumables for creativity.

Assorted assortment

An equally practical option for a country table, along with wooden, metal, rattan, and stone products, is a “hodgepodge” made from all sorts of things. This creation will become a multi-colored “character” of your garden and will never go unnoticed. What is it made from? You will not believe! Your starting materials will be:

Broken flower stand.
Metal barrel lid.
Scraps of colored plastic or round glass.

timber set

Take a sheet of paper and try to draw a circular pattern on it in the spirit of Moroccan style. Enlarge your creation to the required size. A photocopier will help you do this quickly.

We place the resulting blank under glass and draw lines with a copper outline. Let it dry for a day or a little less. The manufacturer indicates the recommended drying time.

it is enough to decorate the sides of benches and chairs with wheels to get an original garden furniture for the dacha

Now it’s time to paint the marked glass with stained glass paints. The main thing here is that the colors are located evenly within the area allocated to them. If you have never worked with specific paints, it makes sense to practice on a separate piece of glass in order to understand how much you need to use for high-quality painting of fragments. The completed painting must also be thoroughly dried.

The finished glass can be additionally decorated with elements drawn with a copper outline.

Cover the lid of the barrel with white paint, which will hide traces of rust, and proceed to preparing the main part of the tabletop.

garden table made from a basket of firewood

The metal part of the flower stand, which will serve as a supportDIY garden tableneeds to be primed and painted acrylic paint copper color and partially patinated.

Once the footboard is ready, seal the areas where it touches the glass with window sealant. This is necessary for its better fastening.

Now the final stage. Put all the pieces together: arrange glass table top into the lid and place the composition on the stand.

It may not be very comfortable to dine at such a table, but drinking coffee in the cool of the evening will be very pleasant.

By decorating an ordinary tree stump with mosaics, you can get an original table

Pallet models

After building a country house, you probably still have at least a few pallets on which packaged bricks or building mixtures. You don’t even suspect what a lifesaver this is for decorating your dacha. With their help, the table will be ready in a few hours, and it will look such that it will not be a shame to place it not only in the garden, but also in home interior. In this case, note that you will not even incur any special financial costs.

garden table made from pallets

A table for a garden, made with your own hands from pallets, can be constructed in several ways. For example, for the most simple option you will need:

Screwdriver.
Brushes.
Sandpaper.
Swivel wheels.
Colored antiseptic stain.
Screws.

mobile table for a garden made from pallets

First of all, start sanding the pallet. At the first stage of removing the rough layer, use coarse-grained sandpaper; fine-grained sandpaper will be needed for final processing. If you have a grinder in use that comes with a grinding wheel, use it instead of rolls of sandpaper. This will speed up the preparation process.

master class on making a table for a garden with your own hands

Turn the tray over and attach small casters to the bottom. This is done using ordinary screws. For greater reliability of fastening, place under the last washers, which can be removed from similar screws used for working with metal tiles. Don't ignore this advice. The wheel bases have enough large holes, and a screw without a backing will not be able to properly fix the part to the wooden surface.

step-by-step process of making a table

Now all that remains is to open the finished product with a wax-containing antiseptic. If you want to highlight the structure of the wood, use a transparent composition. To add color you will need a stain. You can style the table:

under oak;
larch;
rosewood;
nut;
pine

A low wide table would be appropriate on the veranda, in attic room, bathhouse interior.

without additional treatment, the table will last at least two seasons

If you want to make your summer recreation area more comfortable, make not just a table from pallets, but a whole set country furniture, supplementing it with permanently fixed benches. Such a kit can be made portable and, if necessary, moved from the barbecue, say, to the pool or to the pergola.

bright table made of pallets for the whole family

A creative option for a country setting would be a pallet transformed into a tabletop and equipped with vintage legs left over from an old chest of drawers, table, or cabinet. This detail needs to be highlighted in a contrasting color.

You can use such furniture in the bedroom, gazebo, or on the terrace.

Reel table

Vertical planks allow you to place various items

“The coil itself is heavy, but it’s easy to construct a lightweight version from it table for the dacha and again, do it yourself »

Cable spools are also an excellent material for creating a country house design. Look at it – it’s almost a finished table! A little decor and it's ready to use. The easiest way to decorate a reel is with twisted twine. To do this, simply wrap it tightly around its trunk. The upper disk of the structure is sanded and varnished. If you want to add functionality to the product, install vertical slats around the circumference. They can also be decorated with rope. With the advent of crossbars, you can store the necessary items under the table.

reel table with umbrella mount

The coil itself is heavy, but it’s easy to use it to construct a lightweight version of a table for a summer house and, again, do it yourself. You will only need the top disk from the product, which will act as a tabletop. The frame frame for its installation can be made of metal.

If in shady garden there will be suitable height and the strength of the stump, then it can also be converted into an improvised table with the help of a reel disk. This idea will be good not only for a playground, it can also be rationally used when organizing a relaxation corner for adults. By sawing a wooden disk in half, you can assemble original chairs, which can also be placed on stump legs. This will make a nice garden set.

a table made from a reel can be decorated with any pattern

Wood table?

Why not? This brutal option can decorate a barbecue area or even a living room. Work is nothing at all. We find an old thick log, saturate it with stain and level the lower part, giving the product stability.

table on wheels made of stump

A mobile table made of hemp is no less simple to manufacture and attractive in design. By the way, its functionality can be expanded if you are not too lazy to sew a foam seat on it, which will allow you to easily transform the structure into a comfortable pouf.

Not in short supply at the dacha and chopped firewood. Using them, it’s also not a problem to quickly build a comfortable table design for your garden with your own hands. Collect flat base and fasten the split bars into the tabletop with a belt tie. Put it all down and enjoy communing with primeval nature to the fullest.

table for a living room from an old log

Garden composition made of tires

Take your time to get rid of old tires. With them you can make a magnificent landscape decor with extended functionality: use the table not just as a table, and the pouf next to it not only as a pouf, but also create a place inside them for gardening tools, For example.

table and chairs are made in one designer style from old tires

Paint the tires in a color acceptable to you, dry them, fold them into a column, holding the elements together silicone sealant or other suitable composition.

Now work on the table top and seat. It’s a good idea to make the first one from durable plastic or cut it out of wood. For the pouf, also cut out a plywood disk of slightly smaller diameter than the tires, glue foam rubber to it and cover it with fabric. The removable parts are ready.

Cooking table

mobile table made from old quartz with a wooden tabletop

Did you find grandma's brew in the bins? Fabulous! Let's transform it into a mobile storage table. We equip the bottom with wheels, and for the upper part we assemble a tabletop from boards. Having cut the boards to size, we assemble them together into transverse strips, the length of which should correspond to the diameter of the weld. This will help the tabletop stay firmly in place and not move to the side or tip over at the slightest load. There will be enough space inside the makeshift table to organize a mini-bar.

Using the same principle, you can convert empty boxes, barrels, etc. into useful items.

original table with large metal wheels instead of legs and built-in benches

Conclusion

As you can see, assembling a garden table with your own hands is a very exciting and absolutely not labor-intensive task. Here, even beginners will not have to be afraid of ruining something, because initially unsuitable materials are used for work. direct use objects and elements. Try your hand at something that is unfamiliar to you. Perhaps the final results will become an incentive not to stop there, but to go further. From the presented materials you can make many more unusual and useful things in your country life!